From mboxrd@z Thu Jan 1 00:00:00 1970 From: Igor Opaniuk Date: Thu, 22 Oct 2020 11:21:39 +0300 Subject: [PATCH v1 3/7] doc: board: apalis-imx8x: add documentation In-Reply-To: <20201022082143.21170-1-igor.opaniuk@gmail.com> References: <20201022082143.21170-1-igor.opaniuk@gmail.com> Message-ID: <20201022082143.21170-4-igor.opaniuk@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Igor Opaniuk This documents the u-boot build and deployment procedure. Signed-off-by: Igor Opaniuk --- doc/board/toradex/apalix-imx8x.rst | 74 ++++++++++++++++++++++++++++++ doc/board/toradex/index.rst | 1 + 2 files changed, 75 insertions(+) create mode 100644 doc/board/toradex/apalix-imx8x.rst diff --git a/doc/board/toradex/apalix-imx8x.rst b/doc/board/toradex/apalix-imx8x.rst new file mode 100644 index 0000000000..ce7dde8d00 --- /dev/null +++ b/doc/board/toradex/apalix-imx8x.rst @@ -0,0 +1,74 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Apalis iMX8X V1.1A Module +========================== + +Quick Start +----------- + +- Build the ARM trusted firmware binary +- Get scfw_tcm.bin and ahab-container.img +- Build U-Boot +- Load U-Boot binary using uuu +- Flash U-Boot binary into the eMMC +- Boot + +Get and Build the ARM Trusted Firmware +-------------------------------------- + +.. code-block:: bash + + $ git clone -b toradex_imx_5.4.24_2.1.0 http://git.toradex.com/cgit/imx-atf.git + $ cd imx-atf/ + $ make PLAT=imx8qx bl31 + +Get scfw_tcm.bin and ahab-container.img +--------------------------------------- + +.. code-block:: bash + + $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/blob/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.6.3.bin + $ chmod +x imx-seco-3.6.3.bin + $ ./imx-seco-3.6.3.bin + +Copy the following binaries to the U-Boot folder: + +.. code-block:: bash + + $ cp imx-atf/build/imx8qx/release/bl31.bin . + $ cp imx-seco-3.6.3/firmware/seco/mx8qxb0-ahab-container.img mx8qx-ahab-container.imx8_defconfig + +Build U-Boot +------------ +.. code-block:: bash + + $ make apalis-imx8x_defconfig + $ make u-boot-dtb.imx + +Load the U-Boot Binary Using UUU +-------------------------------- + +Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``: + +https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases + +Put the module into USB recovery aka serial downloader mode, connect USB device +to your host and execute uuu: + +.. code-block:: bash + + sudo ./uuu u-boot/u-boot-dtb.imx + +Flash the U-Boot Binary into the eMMC +------------------------------------- + +Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area +partition and boot: + +.. code-block:: bash + + load mmc 1:1 $loadaddr u-boot-dtb.imx + setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 + mmc dev 0 1 + mmc write ${loadaddr} 0x0 ${blkcnt} diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst index 16b5a0770d..abba648f86 100644 --- a/doc/board/toradex/index.rst +++ b/doc/board/toradex/index.rst @@ -7,6 +7,7 @@ Toradex :maxdepth: 2 apalix-imx8 + apalix-imx8x colibri_imx7 colibri-imx8x verdin-imx8mm -- 2.17.1