On Fri, 23 Oct 2020 09:47:14 +0300 Marcel Apfelbaum wrote: > Hi David, > > On Fri, Oct 23, 2020 at 6:49 AM David Gibson wrote: > > > On Thu, 22 Oct 2020 11:01:04 -0400 > > "Michael S. Tsirkin" wrote: > > > > > On Thu, Oct 22, 2020 at 05:50:51PM +0300, Marcel Apfelbaum wrote: > > > [...] > > > > > > Right. After detecting just failing unconditionally it a bit too > > > simplistic IMHO. > > > > There's also another factor here, which I thought I'd mentioned > > already, but looks like I didn't: I think we're still missing some > > details in what's going on. > > > > The premise for this patch is that plugging while the indicator is in > > transition state is allowed to fail in any way on the guest side. I > > don't think that's a reasonable interpretation, because it's unworkable > > for physical hotplug. If the indicator starts blinking while you're in > > the middle of shoving a card in, you'd be in trouble. > > > > So, what I'm assuming here is that while "don't plug while blinking" is > > the instruction for the operator to obey as best they can, on the guest > > side the rule has to be "start blinking, wait a while and by the time > > you leave blinking state again, you can be confident any plugs or > > unplugs have completed". Obviously still racy in the strict computer > > science sense, but about the best you can do with slow humans in the > > mix. > > > > So, qemu should of course endeavour to follow that rule as though it > > was a human operator on a physical machine and not plug when the > > indicator is blinking. *But* the qemu plug will in practice be fast > > enough that if we're hitting real problems here, it suggests the guest > > is still doing something wrong. > > > > I personally think there is a little bit of over-engineering here. > Let's start with the spec: > > Power Indicator Blinking > A blinking Power Indicator indicates that the slot is powering up or > powering down and that > insertion or removal of the adapter is not permitted. Right, but the weird bit here is that IIUC, the kernel during general probe is switching the indicator from off -> blinking -> off without it ever going to "on" state. And it seems to do the power on and presence check with the indicator still in blinking state. This is different from the normal sequence on a hotplug: press button indicator goes to blinking ...wait... indicator goes to full on slot powers on presence detect Or am I missing something? > What exactly is an interpretation here? > As you stated, the races are theoretical, the whole point of the indicator > is to let the operator know he can't plug the device just yet. > > I understand it would be more user friendly if the QEMU would wait > internally for the > blinking to end, but the whole point of the indicator is to let the > operator (human or machine) > know they can't plug the device at a specific time. > Should QEMU take the responsibility of the operator? Is it even correct? I don't think there's an unambiguous correct answer here. But I think it's reasonable to interpret a general "device_add" as "instruct the virtual operator to plug in the card ASAP" as easily as "shove the virtual card in right now". device_add already covers a bunch of different pluggable interfaces, so I don't think precisely aligning to pci-e semantics is really a priority. > Even if we would want such a feature, how is it related to this patch? > The patch simply refuses to start a hotplug operation when it knows it will > not succeed. I don't think I was clear. There are two separate and unrelated things I'm bringing up here. The first is that having the device_add fail for transitory reasons that the management layer doesn't really care about is really bad UX. But the second point I'm raising here is that "don't plug when blinking" is not, strictly speaking an implementable strategy for a human operator. That makes me conclude that the idea here is plugs started at basically the same time as the blinking starts (which could be a little before or a little after, humans being fuzzy) should actually be acceptable, even if they finish after the indicator is blinking. It's not clear to me that the kernel's current behaviour actually permits that. > Another way that would make sense to me would be is a new QEMU interface > other than > "add_device", let's say "adding_device_allowed", that would return true if > the hotplug is allowed > at this point of time. (I am aware of the theoretical races) > > The above will at least mimic the mechanics of the pyhs world. The > operator looks at the indicator, > the management software checks if adding the device is allowed. > Since it is a corner case I would prefer the device_add to fail rather than > introducing a new interface, > but that's just me. Oh, no, that's not what I'm suggesting. Adding an "is allowed" command is even worse. It makes the management's task *more* complex, which making any possible race here even wider. -- David Gibson Principal Software Engineer, Virtualization, Red Hat