[PATCH 4.14 000/191] 4.14.203-rc1 review

[PATCH 4.14 000/191] 4.14.203-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.203 release.
There are 191 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.203-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.203-rc1

Lorenzo Colitti <lorenzo@google.com>
    usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.

Christian Eggers <ceggers@arri.de>
    eeprom: at25: set minimum read/write access stride to 1

Oliver Neukum <oneukum@suse.com>
    USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

Vincent Mailhol <mailhol.vincent@wanadoo.fr>
    usb: cdc-acm: add quirk to blacklist ETAS ES58X devices

Peng Fan <peng.fan@nxp.com>
    tty: serial: fsl_lpuart: fix lpuart32_poll_get_char

Valentin Vidic <vvidic@valentin-vidic.from.hr>
    net: korina: cast KSEG0 address to pointer in kfree

Zekun Shen <bruceshenzk@gmail.com>
    ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()

Can Guo <cang@codeaurora.org>
    scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()

Eli Billauer <eli.billauer@gmail.com>
    usb: core: Solve race condition in anchor cleanup functions

Wang Yufen <wangyufen@huawei.com>
    brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    mwifiex: don't call del_timer_sync() on uninitialized timer

Jan Kara <jack@suse.cz>
    reiserfs: Fix memory leak in reiserfs_parse_options()

Peilin Ye <yepeilin.cs@gmail.com>
    ipvs: Fix uninit-value in do_ip_vs_set_ctl()

Tong Zhang <ztong0001@gmail.com>
    tty: ipwireless: fix error handling

Nilesh Javali <njavali@marvell.com>
    scsi: qedi: Fix list_del corruption while removing active I/O

Nilesh Javali <njavali@marvell.com>
    scsi: qedi: Protect active command list to avoid list corruption

Doug Horn <doughorn@google.com>
    Fix use after free in get_capset_info callback.

Chris Chiu <chiu@endlessm.com>
    rtl8xxxu: prevent potential memory leak

Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
    brcmsmac: fix memory leak in wlc_phy_attach_lcnphy

Jing Xiangfeng <jingxiangfeng@huawei.com>
    scsi: ibmvfc: Fix error return in ibmvfc_probe()

Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
    Bluetooth: Only mark socket zapped after unlocking

Hamish Martin <hamish.martin@alliedtelesis.co.nz>
    usb: ohci: Default to per-port over-current protection

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: make sure the rt allocator doesn't run off the end

Eric Biggers <ebiggers@google.com>
    reiserfs: only call unlock_new_inode() if I_NEW

Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
    misc: rtsx: Fix memory leak in rtsx_pci_probe

Brooke Basile <brookebasile@gmail.com>
    ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()

Joakim Zhang <qiangqing.zhang@nxp.com>
    can: flexcan: flexcan_chip_stop(): add error handling and propagate error value

Johan Hovold <johan@kernel.org>
    USB: cdc-acm: handle broken union descriptors

Jan Kara <jack@suse.cz>
    udf: Avoid accessing uninitialized data on failed inode read

Jan Kara <jack@suse.cz>
    udf: Limit sparing table size

Zqiang <qiang.zhang@windriver.com>
    usb: gadget: function: printer: fix use-after-free in __lock_acquire

Sherry Sun <sherry.sun@nxp.com>
    misc: vop: add round_up(x,4) for vring_size to avoid kernel panic

Sherry Sun <sherry.sun@nxp.com>
    mic: vop: copy data to kernel space then write to io memory

Roman Bolshakov <r.bolshakov@yadro.com>
    scsi: target: core: Add CONTROL field for trace events

Jing Xiangfeng <jingxiangfeng@huawei.com>
    scsi: mvumi: Fix error return in mvumi_io_attach()

Christoph Hellwig <hch@lst.de>
    PM: hibernate: remove the bogus call to get_gendisk() in software_resume()

Thomas Pedersen <thomas@adapt-ip.com>
    mac80211: handle lack of sband->bitrates in rates

Rustam Kovhaev <rkovhaev@gmail.com>
    ntfs: add check for mft record size in superblock

Dinghao Liu <dinghao.liu@zju.edu.cn>
    media: venus: core: Fix runtime PM imbalance in venus_probe

Alexander Aring <aahringo@redhat.com>
    fs: dlm: fix configfs memory leak

Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
    media: saa7134: avoid a shift overflow

Pali Rohár <pali@kernel.org>
    mmc: sdio: Check for CISTPL_VERS_1 buffer size

Adam Goode <agoode@google.com>
    media: uvcvideo: Ensure all probed info is returned to v4l2

Xiaolong Huang <butterflyhuangxx@gmail.com>
    media: media/pci: prevent memory leak in bttv_probe

Dinghao Liu <dinghao.liu@zju.edu.cn>
    media: bdisp: Fix runtime PM imbalance on error

Dinghao Liu <dinghao.liu@zju.edu.cn>
    media: platform: sti: hva: Fix runtime PM imbalance on error

Dinghao Liu <dinghao.liu@zju.edu.cn>
    media: platform: s3c-camif: Fix runtime PM imbalance on error

Dinghao Liu <dinghao.liu@zju.edu.cn>
    media: vsp1: Fix runtime PM imbalance on error

Qiushi Wu <wu000273@umn.edu>
    media: exynos4-is: Fix a reference count leak

Qiushi Wu <wu000273@umn.edu>
    media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync

Qiushi Wu <wu000273@umn.edu>
    media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

Qiushi Wu <wu000273@umn.edu>
    media: sti: Fix reference count leaks

Aditya Pakki <pakki001@umn.edu>
    media: st-delta: Fix reference count leak in delta_run_work

Oliver Neukum <oneukum@suse.com>
    media: ati_remote: sanity check for both endpoints

Pavel Machek <pavel@ucw.cz>
    media: firewire: fix memory leak

Pavel Machek <pavel@denx.de>
    crypto: ccp - fix error handling

Hans de Goede <hdegoede@redhat.com>
    i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

Al Grant <al.grant@foss.arm.com>
    perf: correct SNOOPX field offset

Kaige Li <likaige@loongson.cn>
    NTB: hw: amd: fix an issue about leak system resources

zhenwei pi <pizhenwei@bytedance.com>
    nvmet: fix uninitialized work for zero kato

Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
    powerpc/powernv/dump: Fix race while processing OPAL dump

Michal Simek <michal.simek@xilinx.com>
    arm64: dts: zynqmp: Remove additional compatible string for i2c IPs

Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
    ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers

Stephan Gerhold <stephan@gerhold.net>
    arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts

Krzysztof Kozlowski <krzk@kernel.org>
    memory: fsl-corenet-cf: Fix handling of platform_get_irq() error

Dan Carpenter <dan.carpenter@oracle.com>
    memory: omap-gpmc: Fix a couple off by ones

Robert Hoo <robert.hu@linux.intel.com>
    KVM: x86: emulating RDPID failure shall return #UD rather than #GP

Krzysztof Kozlowski <krzk@kernel.org>
    Input: sun4i-ps2 - fix handling of platform_get_irq() error

Krzysztof Kozlowski <krzk@kernel.org>
    Input: twl4030_keypad - fix handling of platform_get_irq() error

Krzysztof Kozlowski <krzk@kernel.org>
    Input: omap4-keypad - fix handling of platform_get_irq() error

Krzysztof Kozlowski <krzk@kernel.org>
    Input: ep93xx_keypad - fix handling of platform_get_irq() error

YueHaibing <yuehaibing@huawei.com>
    Input: stmfts - fix a & vs && typo

Dan Carpenter <dan.carpenter@oracle.com>
    Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

Xiaoyang Xu <xuxiaoyang2@huawei.com>
    vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages

Alex Williamson <alex.williamson@redhat.com>
    vfio/pci: Clear token on bypass registration failure

Darrick J. Wong <darrick.wong@oracle.com>
    ext4: limit entries returned when counting fsmap records

Navid Emamdoost <navid.emamdoost@gmail.com>
    clk: bcm2835: add missing release if devm_clk_hw_register fails

Claudiu Beznea <claudiu.beznea@microchip.com>
    clk: at91: clk-main: update key before writing AT91_CKGR_MOR

Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
    PCI: iproc: Set affinity mask on MSI interrupts

Dirk Behme <dirk.behme@de.bosch.com>
    i2c: rcar: Auto select RESET_CONTROLLER

Jassi Brar <jaswinder.singh@linaro.org>
    mailbox: avoid timer start from callback

Jing Xiangfeng <jingxiangfeng@huawei.com>
    rapidio: fix the missed put_device() for rio_mport_add_riodev

Souptick Joarder <jrdr.linux@gmail.com>
    rapidio: fix error handling path

Matthew Wilcox (Oracle) <willy@infradead.org>
    ramfs: fix nommu mmap with gaps in the page cache

Tobias Jordan <kernel@cdqe.de>
    lib/crc32.c: fix trivial typo in preprocessor condition

Jamie Iles <jamie@nuviainc.com>
    f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info

Colin Ian King <colin.king@canonical.com>
    IB/rdmavt: Fix sizeof mismatch

Srikar Dronamraju <srikar@linux.vnet.ibm.com>
    cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier

Kajol Jain <kjain@linux.ibm.com>
    powerpc/perf/hv-gpci: Fix starting index value

Athira Rajeev <atrajeev@linux.vnet.ibm.com>
    powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints

Leon Romanovsky <leonro@nvidia.com>
    overflow: Include header file with SIZE_MAX declaration

Daniel Thompson <daniel.thompson@linaro.org>
    kdb: Fix pager search for multi-line strings

Lijun Ou <oulijun@huawei.com>
    RDMA/hns: Set the unsupported wr opcode

Adrian Hunter <adrian.hunter@intel.com>
    perf intel-pt: Fix "context_switch event has no tid" error

Finn Thain <fthain@telegraphics.com.au>
    powerpc/tau: Disable TAU between measurements

Finn Thain <fthain@telegraphics.com.au>
    powerpc/tau: Remove duplicated set_thresholds() call

Finn Thain <fthain@telegraphics.com.au>
    powerpc/tau: Use appropriate temperature sample interval

Michal Kalderon <michal.kalderon@marvell.com>
    RDMA/qedr: Fix use of uninitialized field

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: limit entries returned when counting fsmap records

Necip Fazil Yildiran <fazilyildiran@gmail.com>
    arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER

Guillaume Tucker <guillaume.tucker@collabora.com>
    ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values

Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
    mtd: mtdoops: Don't write panic data twice

Arnd Bergmann <arnd@arndb.de>
    mtd: lpddr: fix excessive stack usage with clang

Nicholas Mc Guire <hofrat@osadl.org>
    powerpc/icp-hv: Fix missing of_node_put() in success path

Nicholas Mc Guire <hofrat@osadl.org>
    powerpc/pseries: Fix missing of_node_put() in rng_init()

Håkon Bugge <haakon.bugge@oracle.com>
    IB/mlx4: Adjust delayed work when a dup is observed

Håkon Bugge <haakon.bugge@oracle.com>
    IB/mlx4: Fix starvation in paravirt mux/demux

Suren Baghdasaryan <surenb@google.com>
    mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary

Ralph Campbell <rcampbell@nvidia.com>
    mm/memcg: fix device private memcg accounting

Valentin Vidic <vvidic@valentin-vidic.from.hr>
    net: korina: fix kfree of rx/tx descriptor array

Tom Rix <trix@redhat.com>
    mwifiex: fix double free

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()

Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
    usb: dwc2: Fix INTR OUT transfers in DDMA mode.

Johannes Berg <johannes.berg@intel.com>
    nl80211: fix non-split wiphy information

Lorenzo Colitti <lorenzo@google.com>
    usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well

Lorenzo Colitti <lorenzo@google.com>
    usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above.

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: mvm: split a print to avoid a WARNING in ROC

Dan Carpenter <dan.carpenter@oracle.com>
    mfd: sm501: Fix leaks in probe()

Thomas Gleixner <tglx@linutronix.de>
    net: enic: Cure the enic api locking trainwreck

Colin Ian King <colin.king@canonical.com>
    qtnfmac: fix resource leaks on unsupported iftype error return path

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    HID: hid-input: fix stylus battery reporting

Eric Dumazet <edumazet@google.com>
    quota: clear padding in v2r1_mem2diskdqb()

Nathan Chancellor <natechancellor@gmail.com>
    usb: dwc2: Fix parameter type in function pointer prototype

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: oss: Avoid mutex lock for a long-time ioctl

Souptick Joarder <jrdr.linux@gmail.com>
    misc: mic: scif: Fix error handling path

Dan Carpenter <dan.carpenter@oracle.com>
    ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()

Thomas Preston <thomas.preston@codethink.co.uk>
    pinctrl: mcp23s08: Fix mcp23x17 precious range

Thomas Preston <thomas.preston@codethink.co.uk>
    pinctrl: mcp23s08: Fix mcp23x17_regmap initialiser

Dan Carpenter <dan.carpenter@oracle.com>
    HID: roccat: add bounds checking in kone_sysfs_write_settings()

Tom Rix <trix@redhat.com>
    video: fbdev: sis: fix null ptr dereference

Colin Ian King <colin.king@canonical.com>
    video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error

Souptick Joarder <jrdr.linux@gmail.com>
    drivers/virt/fsl_hypervisor: Fix error handling path

Hans de Goede <hdegoede@redhat.com>
    pwm: lpss: Add range limit check for the base_unit register value

Hans de Goede <hdegoede@redhat.com>
    pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()

Artem Savkov <asavkov@redhat.com>
    pty: do tty_flip_buffer_push without port->lock in pty_write

Tyrel Datwyler <tyreld@linux.ibm.com>
    tty: hvcs: Don't NULL tty->driver_data until hvcs_cleanup()

Tong Zhang <ztong0001@gmail.com>
    tty: serial: earlycon dependency

Alex Dewar <alex.dewar90@gmail.com>
    VMCI: check return value of get_user_pages_fast() for errors

dinghao.liu@zju.edu.cn <dinghao.liu@zju.edu.cn>
    backlight: sky81452-backlight: Fix refcount imbalance on error

Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
    scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    scsi: qla4xxx: Fix an error handling path in 'qla4xxx_get_host_stats()'

Tom Rix <trix@redhat.com>
    drm/gma500: fix error check

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    mwifiex: Do not use GFP_KERNEL in atomic context

Tom Rix <trix@redhat.com>
    brcmfmac: check ndev pointer

Rohit kumar <rohitkr@codeaurora.org>
    ASoC: qcom: lpass-cpu: fix concurrency issue

Rohit kumar <rohitkr@codeaurora.org>
    ASoC: qcom: lpass-platform: fix memory leak

Bryan O'Donoghue <bryan.odonoghue@linaro.org>
    wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680

Dan Carpenter <dan.carpenter@oracle.com>
    ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()

Dan Carpenter <dan.carpenter@oracle.com>
    ath6kl: prevent potential array overflow in ath6kl_add_new_sta()

Samuel Holland <samuel@sholland.org>
    Bluetooth: hci_uart: Cancel init work before unregistering

Venkateswara Naralasetty <vnaralas@codeaurora.org>
    ath10k: provide survey info as accumulated data

Michał Mirosław <mirq-linux@rere.qmqm.pl>
    regulator: resolve supply after creating regulator

Qiushi Wu <wu000273@umn.edu>
    media: ti-vpe: Fix a missing check and reference count leak

Qiushi Wu <wu000273@umn.edu>
    media: s5p-mfc: Fix a reference count leak

Qiushi Wu <wu000273@umn.edu>
    media: platform: fcp: Fix a reference count leak.

Tom Rix <trix@redhat.com>
    media: tc358743: initialize variable

Dinghao Liu <dinghao.liu@zju.edu.cn>
    media: mx2_emmaprp: Fix memleak in emmaprp_probe

Xiaoliang Pang <dawning.pang@gmail.com>
    cypto: mediatek - fix leaks in mtk_desc_ring_alloc

Tero Kristo <t-kristo@ti.com>
    crypto: omap-sham - fix digcnt register handling with export/import

Dinghao Liu <dinghao.liu@zju.edu.cn>
    media: omap3isp: Fix memleak in isp_probe

Laurent Pinchart <laurent.pinchart@ideasonboard.com>
    media: uvcvideo: Set media controller entity functions

Tom Rix <trix@redhat.com>
    media: m5mols: Check function pointer in m5mols_sensor_power

Sylwester Nawrocki <s.nawrocki@samsung.com>
    media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"

Tom Rix <trix@redhat.com>
    media: tuner-simple: fix regression in simple_set_radio_freq

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    crypto: ixp4xx - Fix the size used in a 'dma_free_coherent()' call

Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
    crypto: mediatek - Fix wrong return value in mtk_desc_ring_alloc()

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: algif_skcipher - EBUSY on aio should be an error

Mark Salter <msalter@redhat.com>
    drivers/perf: xgene_pmu: Fix uninitialized resource struct

Arvind Sankar <nivedita@alum.mit.edu>
    x86/fpu: Allow multiple bits in clearcpuid= parameter

Dinghao Liu <dinghao.liu@zju.edu.cn>
    EDAC/i5100: Fix error handling order in i5100_init_one()

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: algif_aead - Do not set MAY_BACKLOG on the async path

Roberto Sassu <roberto.sassu@huawei.com>
    ima: Don't ignore errors from crypto_shash_update()

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    KVM: SVM: Initialize prev_ga_tag before use

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: x86/mmu: Commit zap of remaining invalid pages when recovering lpages

Shyam Prasad N <sprasad@microsoft.com>
    cifs: Return the error from crypt_message when enc/dec key not found.

Dan Carpenter <dan.carpenter@oracle.com>
    cifs: remove bogus debug code

Eric Dumazet <edumazet@google.com>
    icmp: randomize the global rate limiter

Neal Cardwell <ncardwell@google.com>
    tcp: fix to update snd_wl1 in bulk receiver fast path

Defang Bo <bodefang@126.com>
    nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()

Xie He <xie.he.0141@gmail.com>
    net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup

Xie He <xie.he.0141@gmail.com>
    net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device

Dan Carpenter <dan.carpenter@oracle.com>
    ALSA: bebob: potential info leak in hwdep_read()

Todd Kjos <tkjos@google.com>
    binder: fix UAF when releasing todo list

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: fix data corruption issue on RTL8402

Maciej Żenczykowski <maze@google.com>
    net/ipv4: always honour route mtu during forwarding

Cong Wang <xiyou.wangcong@gmail.com>
    tipc: fix the skb_unshare() in tipc_buf_append()

Wilken Gottwalt <wilken.gottwalt@mailbox.org>
    net: usb: qmi_wwan: add Cellient MPL200 card

Jonathan Lemon <bsd@fb.com>
    mlx4: handle non-napi callers to napi_poll

David Ahern <dsahern@kernel.org>
    ipv4: Restore flowi4_oif update before call to xfrm_lookup_route

David Wilder <dwilder@us.ibm.com>
    ibmveth: Identify ingress large send packets.

David Wilder <dwilder@us.ibm.com>
    ibmveth: Switch order of ibmveth_helper calls.


-------------

Diffstat:

 Documentation/admin-guide/kernel-parameters.txt    |   2 +-
 Documentation/networking/ip-sysctl.txt             |   4 +-
 Makefile                                           |   4 +-
 arch/arc/plat-hsdk/Kconfig                         |   1 +
 arch/arm/boot/dts/owl-s500.dtsi                    |   6 +-
 arch/arm/mm/cache-l2x0.c                           |  16 ++-
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |   4 +-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi             |   4 +-
 arch/powerpc/include/asm/reg.h                     |   2 +-
 arch/powerpc/kernel/tau_6xx.c                      |  82 ++++++----------
 arch/powerpc/perf/hv-gpci-requests.h               |   6 +-
 arch/powerpc/perf/isa207-common.c                  |  10 ++
 arch/powerpc/platforms/Kconfig                     |   9 +-
 arch/powerpc/platforms/powernv/opal-dump.c         |  41 +++++---
 arch/powerpc/platforms/pseries/rng.c               |   1 +
 arch/powerpc/sysdev/xics/icp-hv.c                  |   1 +
 arch/x86/kernel/fpu/init.c                         |  30 ++++--
 arch/x86/kvm/emulate.c                             |   2 +-
 arch/x86/kvm/mmu.c                                 |   1 +
 arch/x86/kvm/svm.c                                 |   1 +
 crypto/algif_aead.c                                |   7 +-
 crypto/algif_skcipher.c                            |   2 +-
 drivers/android/binder.c                           |  35 ++-----
 drivers/bluetooth/hci_ldisc.c                      |   1 +
 drivers/bluetooth/hci_serdev.c                     |   2 +
 drivers/clk/at91/clk-main.c                        |  11 ++-
 drivers/clk/bcm/clk-bcm2835.c                      |   4 +-
 drivers/cpufreq/powernv-cpufreq.c                  |   9 +-
 drivers/crypto/ccp/ccp-ops.c                       |   2 +-
 drivers/crypto/ixp4xx_crypto.c                     |   2 +-
 drivers/crypto/mediatek/mtk-platform.c             |   8 +-
 drivers/crypto/omap-sham.c                         |   3 +
 drivers/edac/i5100_edac.c                          |  11 +--
 drivers/gpu/drm/gma500/cdv_intel_dp.c              |   2 +-
 drivers/gpu/drm/virtio/virtgpu_kms.c               |   2 +
 drivers/gpu/drm/virtio/virtgpu_vq.c                |  10 +-
 drivers/hid/hid-input.c                            |   4 +-
 drivers/hid/hid-roccat-kone.c                      |  23 +++--
 drivers/i2c/busses/Kconfig                         |   1 +
 drivers/i2c/i2c-core-acpi.c                        |  11 ++-
 drivers/infiniband/hw/hns/hns_roce_hw_v1.c         |   1 -
 drivers/infiniband/hw/mlx4/cm.c                    |   3 +
 drivers/infiniband/hw/mlx4/mad.c                   |  34 ++++++-
 drivers/infiniband/hw/mlx4/mlx4_ib.h               |   2 +
 drivers/infiniband/hw/qedr/main.c                  |   2 +-
 drivers/infiniband/sw/rdmavt/vt.c                  |   4 +-
 drivers/input/keyboard/ep93xx_keypad.c             |   4 +-
 drivers/input/keyboard/omap4-keypad.c              |   6 +-
 drivers/input/keyboard/twl4030_keypad.c            |   8 +-
 drivers/input/serio/sun4i-ps2.c                    |   9 +-
 drivers/input/touchscreen/imx6ul_tsc.c             |  27 +++---
 drivers/input/touchscreen/stmfts.c                 |   2 +-
 drivers/mailbox/mailbox.c                          |  12 ++-
 drivers/media/firewire/firedtv-fw.c                |   6 +-
 drivers/media/i2c/m5mols/m5mols_core.c             |   3 +-
 drivers/media/i2c/tc358743.c                       |   2 +-
 drivers/media/pci/bt8xx/bttv-driver.c              |  13 ++-
 drivers/media/pci/saa7134/saa7134-tvaudio.c        |   3 +-
 drivers/media/platform/exynos4-is/fimc-isp.c       |   4 +-
 drivers/media/platform/exynos4-is/fimc-lite.c      |   2 +-
 drivers/media/platform/exynos4-is/media-dev.c      |   8 +-
 drivers/media/platform/exynos4-is/mipi-csis.c      |   4 +-
 drivers/media/platform/mx2_emmaprp.c               |   7 +-
 drivers/media/platform/omap3isp/isp.c              |   6 +-
 drivers/media/platform/qcom/venus/core.c           |   5 +-
 drivers/media/platform/rcar-fcp.c                  |   4 +-
 drivers/media/platform/s3c-camif/camif-core.c      |   5 +-
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c        |   4 +-
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c      |   3 +-
 drivers/media/platform/sti/delta/delta-v4l2.c      |   4 +-
 drivers/media/platform/sti/hva/hva-hw.c            |   4 +-
 drivers/media/platform/ti-vpe/vpe.c                |   2 +
 drivers/media/platform/vsp1/vsp1_drv.c             |  11 ++-
 drivers/media/rc/ati_remote.c                      |   4 +
 drivers/media/tuners/tuner-simple.c                |   5 +-
 drivers/media/usb/uvc/uvc_entity.c                 |  35 +++++++
 drivers/media/usb/uvc/uvc_v4l2.c                   |  30 ++++++
 drivers/memory/fsl-corenet-cf.c                    |   6 +-
 drivers/memory/omap-gpmc.c                         |   4 +-
 drivers/mfd/rtsx_pcr.c                             |   4 +-
 drivers/mfd/sm501.c                                |   8 +-
 drivers/misc/eeprom/at25.c                         |   2 +-
 drivers/misc/mic/scif/scif_rma.c                   |   4 +-
 drivers/misc/mic/vop/vop_main.c                    |   2 +-
 drivers/misc/mic/vop/vop_vringh.c                  |  24 +++--
 drivers/misc/vmw_vmci/vmci_queue_pair.c            |  10 +-
 drivers/mmc/core/sdio_cis.c                        |   3 +
 drivers/mtd/lpddr/lpddr2_nvm.c                     |  35 ++++---
 drivers/mtd/mtdoops.c                              |  11 ++-
 drivers/net/can/flexcan.c                          |  34 +++++--
 drivers/net/ethernet/cisco/enic/enic.h             |   1 +
 drivers/net/ethernet/cisco/enic/enic_api.c         |   6 ++
 drivers/net/ethernet/cisco/enic/enic_main.c        |  27 ++++--
 drivers/net/ethernet/ibm/ibmveth.c                 |  19 +++-
 drivers/net/ethernet/korina.c                      |   3 +-
 drivers/net/ethernet/mellanox/mlx4/en_rx.c         |   3 +
 drivers/net/ethernet/mellanox/mlx4/en_tx.c         |   2 +-
 drivers/net/ethernet/realtek/r8169.c               | 108 +++++++++++----------
 drivers/net/usb/qmi_wwan.c                         |   1 +
 drivers/net/wan/hdlc.c                             |  10 +-
 drivers/net/wan/hdlc_raw_eth.c                     |   1 +
 drivers/net/wireless/ath/ath10k/htt_rx.c           |   8 ++
 drivers/net/wireless/ath/ath10k/mac.c              |   2 +-
 drivers/net/wireless/ath/ath6kl/main.c             |   3 +
 drivers/net/wireless/ath/ath6kl/wmi.c              |   5 +
 drivers/net/wireless/ath/ath9k/hif_usb.c           |  19 ++++
 drivers/net/wireless/ath/ath9k/htc_hst.c           |   2 +
 drivers/net/wireless/ath/wcn36xx/main.c            |   2 +-
 .../wireless/broadcom/brcm80211/brcmfmac/core.c    |   2 +-
 .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c  |   2 +
 .../broadcom/brcm80211/brcmsmac/phy/phy_lcn.c      |   4 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |   9 +-
 drivers/net/wireless/marvell/mwifiex/scan.c        |   2 +-
 drivers/net/wireless/marvell/mwifiex/sdio.c        |   2 +
 drivers/net/wireless/marvell/mwifiex/usb.c         |   3 +-
 drivers/net/wireless/quantenna/qtnfmac/commands.c  |   2 +
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  |  10 +-
 drivers/ntb/hw/amd/ntb_hw_amd.c                    |   1 +
 drivers/nvme/target/core.c                         |   3 +-
 drivers/pci/host/pcie-iproc-msi.c                  |  13 ++-
 drivers/perf/xgene_pmu.c                           |  32 +++---
 drivers/pinctrl/pinctrl-mcp23s08.c                 |  24 ++---
 drivers/pwm/pwm-lpss.c                             |   7 +-
 drivers/rapidio/devices/rio_mport_cdev.c           |  18 ++--
 drivers/regulator/core.c                           |  21 ++--
 drivers/scsi/be2iscsi/be_main.c                    |   4 +-
 drivers/scsi/csiostor/csio_hw.c                    |   2 +-
 drivers/scsi/ibmvscsi/ibmvfc.c                     |   1 +
 drivers/scsi/mvumi.c                               |   1 +
 drivers/scsi/qedi/qedi_fw.c                        |  23 ++++-
 drivers/scsi/qedi/qedi_iscsi.c                     |   2 +
 drivers/scsi/qla4xxx/ql4_os.c                      |   2 +-
 drivers/scsi/ufs/ufs-qcom.c                        |   5 -
 drivers/tty/hvc/hvcs.c                             |  14 +--
 drivers/tty/ipwireless/network.c                   |   4 +-
 drivers/tty/ipwireless/tty.c                       |   2 +-
 drivers/tty/pty.c                                  |   2 +-
 drivers/tty/serial/Kconfig                         |   1 +
 drivers/tty/serial/fsl_lpuart.c                    |   2 +-
 drivers/usb/class/cdc-acm.c                        |  23 +++++
 drivers/usb/class/cdc-wdm.c                        |  72 ++++++++++----
 drivers/usb/core/urb.c                             |  89 ++++++++++-------
 drivers/usb/dwc2/gadget.c                          |  40 ++++++--
 drivers/usb/dwc2/params.c                          |   2 +-
 drivers/usb/gadget/function/f_ncm.c                |   8 +-
 drivers/usb/gadget/function/f_printer.c            |  16 ++-
 drivers/usb/gadget/function/u_ether.c              |   2 +-
 drivers/usb/host/ohci-hcd.c                        |  16 +--
 drivers/vfio/pci/vfio_pci_intrs.c                  |   4 +-
 drivers/vfio/vfio_iommu_type1.c                    |   3 +-
 drivers/video/backlight/sky81452-backlight.c       |   1 +
 drivers/video/fbdev/sis/init.c                     |  11 +--
 drivers/video/fbdev/vga16fb.c                      |  14 +--
 drivers/virt/fsl_hypervisor.c                      |  17 ++--
 fs/cifs/asn1.c                                     |  16 +--
 fs/cifs/smb2ops.c                                  |   2 +-
 fs/dlm/config.c                                    |   3 +
 fs/ext4/fsmap.c                                    |   3 +
 fs/f2fs/sysfs.c                                    |   1 +
 fs/ntfs/inode.c                                    |   6 ++
 fs/proc/base.c                                     |   3 +-
 fs/quota/quota_v2.c                                |   1 +
 fs/ramfs/file-nommu.c                              |   2 +-
 fs/reiserfs/inode.c                                |   3 +-
 fs/reiserfs/super.c                                |   8 +-
 fs/udf/inode.c                                     |  25 ++---
 fs/udf/super.c                                     |   6 ++
 fs/xfs/xfs_fsmap.c                                 |   3 +
 fs/xfs/xfs_rtalloc.c                               |  11 +++
 include/linux/oom.h                                |   1 +
 include/linux/overflow.h                           |   1 +
 include/linux/sched/coredump.h                     |   1 +
 include/net/ip.h                                   |   6 ++
 include/scsi/scsi_common.h                         |   7 ++
 include/trace/events/target.h                      |  12 +--
 include/uapi/linux/perf_event.h                    |   2 +-
 kernel/debug/kdb/kdb_io.c                          |   8 +-
 kernel/fork.c                                      |  21 ++++
 kernel/power/hibernate.c                           |  11 ---
 lib/crc32.c                                        |   2 +-
 mm/memcontrol.c                                    |   5 +-
 mm/oom_kill.c                                      |   2 +
 net/bluetooth/l2cap_sock.c                         |   7 +-
 net/ipv4/icmp.c                                    |   7 +-
 net/ipv4/route.c                                   |   4 +-
 net/ipv4/tcp_input.c                               |   2 +
 net/mac80211/cfg.c                                 |   3 +-
 net/mac80211/sta_info.c                            |   4 +
 net/netfilter/ipvs/ip_vs_ctl.c                     |   7 +-
 net/nfc/netlink.c                                  |   2 +-
 net/tipc/msg.c                                     |   3 +-
 net/wireless/nl80211.c                             |   5 +-
 samples/mic/mpssd/mpssd.c                          |   4 +-
 security/integrity/ima/ima_crypto.c                |   2 +
 sound/core/seq/oss/seq_oss.c                       |   7 +-
 sound/firewire/bebob/bebob_hwdep.c                 |   3 +-
 sound/soc/qcom/lpass-cpu.c                         |  16 ---
 sound/soc/qcom/lpass-platform.c                    |   3 +-
 tools/perf/util/intel-pt.c                         |   8 +-
 199 files changed, 1205 insertions(+), 626 deletions(-)

[PATCH 4.14 001/191] ibmveth: Switch order of ibmveth_helper calls.

[Greg Kroah-Hartman]

From: David Wilder <dwilder@us.ibm.com>

[ Upstream commit 5ce9ad815a296374ca21f43f3b1ab5083d202ee1 ]

ibmveth_rx_csum_helper() must be called after ibmveth_rx_mss_helper()
as ibmveth_rx_csum_helper() may alter ip and tcp checksum values.

Fixes: 66aa0678efc2 ("ibmveth: Support to enable LSO/CSO for Trunk VEA.")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Reviewed-by: Cristobal Forno <cris.forno@ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ibm/ibmveth.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1366,16 +1366,16 @@ static int ibmveth_poll(struct napi_stru
 			skb_put(skb, length);
 			skb->protocol = eth_type_trans(skb, netdev);
 
-			if (csum_good) {
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-				ibmveth_rx_csum_helper(skb, adapter);
-			}
-
 			if (length > netdev->mtu + ETH_HLEN) {
 				ibmveth_rx_mss_helper(skb, mss, lrg_pkt);
 				adapter->rx_large_packets++;
 			}
 
+			if (csum_good) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				ibmveth_rx_csum_helper(skb, adapter);
+			}
+
 			napi_gro_receive(napi, skb);	/* send it up */
 
 			netdev->stats.rx_packets++;

[PATCH 4.14 002/191] ibmveth: Identify ingress large send packets.

[Greg Kroah-Hartman]

From: David Wilder <dwilder@us.ibm.com>

[ Upstream commit 413f142cc05cb03f2d1ea83388e40c1ddc0d74e9 ]

Ingress large send packets are identified by either:
The IBMVETH_RXQ_LRG_PKT flag in the receive buffer
or with a -1 placed in the ip header checksum.
The method used depends on firmware version. Frame
geometry and sufficient header validation is performed by the
hypervisor eliminating the need for further header checks here.

Fixes: 7b5967389f5a ("ibmveth: set correct gso_size and gso_type")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Reviewed-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Reviewed-by: Cristobal Forno <cris.forno@ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ibm/ibmveth.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1330,6 +1330,7 @@ static int ibmveth_poll(struct napi_stru
 			int offset = ibmveth_rxq_frame_offset(adapter);
 			int csum_good = ibmveth_rxq_csum_good(adapter);
 			int lrg_pkt = ibmveth_rxq_large_packet(adapter);
+			__sum16 iph_check = 0;
 
 			skb = ibmveth_rxq_get_buffer(adapter);
 
@@ -1366,7 +1367,17 @@ static int ibmveth_poll(struct napi_stru
 			skb_put(skb, length);
 			skb->protocol = eth_type_trans(skb, netdev);
 
-			if (length > netdev->mtu + ETH_HLEN) {
+			/* PHYP without PLSO support places a -1 in the ip
+			 * checksum for large send frames.
+			 */
+			if (skb->protocol == cpu_to_be16(ETH_P_IP)) {
+				struct iphdr *iph = (struct iphdr *)skb->data;
+
+				iph_check = iph->check;
+			}
+
+			if ((length > netdev->mtu + ETH_HLEN) ||
+			    lrg_pkt || iph_check == 0xffff) {
 				ibmveth_rx_mss_helper(skb, mss, lrg_pkt);
 				adapter->rx_large_packets++;
 			}

[PATCH 4.14 003/191] ipv4: Restore flowi4_oif update before call to xfrm_lookup_route

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit 874fb9e2ca949b443cc419a4f2227cafd4381d39 ]

Tobias reported regressions in IPsec tests following the patch
referenced by the Fixes tag below. The root cause is dropping the
reset of the flowi4_oif after the fib_lookup. Apparently it is
needed for xfrm cases, so restore the oif update to ip_route_output_flow
right before the call to xfrm_lookup_route.

Fixes: 2fbc6e89b2f1 ("ipv4: Update exception handling for multipath routes via same device")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2603,10 +2603,12 @@ struct rtable *ip_route_output_flow(stru
 	if (IS_ERR(rt))
 		return rt;
 
-	if (flp4->flowi4_proto)
+	if (flp4->flowi4_proto) {
+		flp4->flowi4_oif = rt->dst.dev->ifindex;
 		rt = (struct rtable *)xfrm_lookup_route(net, &rt->dst,
 							flowi4_to_flowi(flp4),
 							sk, 0);
+	}
 
 	return rt;
 }

[PATCH 4.14 004/191] mlx4: handle non-napi callers to napi_poll

[Greg Kroah-Hartman]

From: Jonathan Lemon <bsd@fb.com>

[ Upstream commit b2b8a92733b288128feb57ffa694758cf475106c ]

netcons calls napi_poll with a budget of 0 to transmit packets.
Handle this by:
 - skipping RX processing
 - do not try to recycle TX packets to the RX cache

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_rx.c |    3 +++
 drivers/net/ethernet/mellanox/mlx4/en_tx.c |    2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -948,6 +948,9 @@ int mlx4_en_poll_rx_cq(struct napi_struc
 	bool clean_complete = true;
 	int done;
 
+	if (!budget)
+		return 0;
+
 	if (priv->tx_ring_num[TX_XDP]) {
 		xdp_tx_cq = priv->tx_cq[TX_XDP][cq->ring];
 		if (xdp_tx_cq->xdp_busy) {
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -343,7 +343,7 @@ u32 mlx4_en_recycle_tx_desc(struct mlx4_
 		.dma = tx_info->map0_dma,
 	};
 
-	if (!mlx4_en_rx_recycle(ring->recycle_ring, &frame)) {
+	if (!napi_mode || !mlx4_en_rx_recycle(ring->recycle_ring, &frame)) {
 		dma_unmap_page(priv->ddev, tx_info->map0_dma,
 			       PAGE_SIZE, priv->dma_dir);
 		put_page(tx_info->page);

[PATCH 4.14 005/191] net: usb: qmi_wwan: add Cellient MPL200 card

[Greg Kroah-Hartman]

From: Wilken Gottwalt <wilken.gottwalt@mailbox.org>

[ Upstream commit 28802e7c0c9954218d1830f7507edc9d49b03a00 ]

Add usb ids of the Cellient MPL200 card.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1301,6 +1301,7 @@ static const struct usb_device_id produc
 	{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)},	/* Fibocom NL678 series */
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
 	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
+	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},    /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */

[PATCH 4.14 006/191] tipc: fix the skb_unshare() in tipc_buf_append()

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit ed42989eab57d619667d7e87dfbd8fe207db54fe ]

skb_unshare() drops a reference count on the old skb unconditionally,
so in the failure case, we end up freeing the skb twice here.
And because the skb is allocated in fclone and cloned by caller
tipc_msg_reassemble(), the consequence is actually freeing the
original skb too, thus triggered the UAF by syzbot.

Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy().

Fixes: ff48b6222e65 ("tipc: use skb_unshare() instead in tipc_buf_append()")
Reported-and-tested-by: syzbot+e96a7ba46281824cc46a@syzkaller.appspotmail.com
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/msg.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -140,7 +140,8 @@ int tipc_buf_append(struct sk_buff **hea
 	if (fragid == FIRST_FRAGMENT) {
 		if (unlikely(head))
 			goto err;
-		frag = skb_unshare(frag, GFP_ATOMIC);
+		if (skb_cloned(frag))
+			frag = skb_copy(frag, GFP_ATOMIC);
 		if (unlikely(!frag))
 			goto err;
 		head = *headbuf = frag;

[PATCH 4.14 007/191] net/ipv4: always honour route mtu during forwarding

[Greg Kroah-Hartman]

From: "Maciej Żenczykowski" <maze@google.com>

[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ]

Documentation/networking/ip-sysctl.txt:46 says:
  ip_forward_use_pmtu - BOOLEAN
    By default we don't trust protocol path MTUs while forwarding
    because they could be easily forged and can lead to unwanted
    fragmentation by the router.
    You only need to enable this if you have user-space software
    which tries to discover path mtus by itself and depends on the
    kernel honoring this information. This is normally not the case.
    Default: 0 (disabled)
    Possible values:
    0 - disabled
    1 - enabled

Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).

Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...

It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.

Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).

This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.

I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Sunmeet Gill (Sunny) <sgill@quicinc.com>
Cc: Vinay Paradkar <vparadka@qti.qualcomm.com>
Cc: Tyler Wear <twear@quicinc.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip.h |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -364,12 +364,18 @@ static inline unsigned int ip_dst_mtu_ma
 						    bool forwarding)
 {
 	struct net *net = dev_net(dst->dev);
+	unsigned int mtu;
 
 	if (net->ipv4.sysctl_ip_fwd_use_pmtu ||
 	    ip_mtu_locked(dst) ||
 	    !forwarding)
 		return dst_mtu(dst);
 
+	/* 'forwarding = true' case should always honour route mtu */
+	mtu = dst_metric_raw(dst, RTAX_MTU);
+	if (mtu)
+		return mtu;
+
 	return min(READ_ONCE(dst->dev->mtu), IP_MAX_MTU);
 }
 

[PATCH 4.14 008/191] r8169: fix data corruption issue on RTL8402

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit ef9da46ddef071e1bbb943afbbe9b38771855554 ]

Petr reported that after resume from suspend RTL8402 partially
truncates incoming packets, and re-initializing register RxConfig
before the actual chip re-initialization sequence is needed to avoid
the issue.

Reported-by: Petr Tesarik <ptesarik@suse.cz>
Proposed-by: Petr Tesarik <ptesarik@suse.cz>
Tested-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |  108 ++++++++++++++++++-----------------
 1 file changed, 56 insertions(+), 52 deletions(-)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4501,6 +4501,58 @@ static void rtl_rar_set(struct rtl8169_p
 	rtl_unlock_work(tp);
 }
 
+static void rtl_init_rxcfg(struct rtl8169_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_01:
+	case RTL_GIGA_MAC_VER_02:
+	case RTL_GIGA_MAC_VER_03:
+	case RTL_GIGA_MAC_VER_04:
+	case RTL_GIGA_MAC_VER_05:
+	case RTL_GIGA_MAC_VER_06:
+	case RTL_GIGA_MAC_VER_10:
+	case RTL_GIGA_MAC_VER_11:
+	case RTL_GIGA_MAC_VER_12:
+	case RTL_GIGA_MAC_VER_13:
+	case RTL_GIGA_MAC_VER_14:
+	case RTL_GIGA_MAC_VER_15:
+	case RTL_GIGA_MAC_VER_16:
+	case RTL_GIGA_MAC_VER_17:
+		RTL_W32(RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
+		break;
+	case RTL_GIGA_MAC_VER_18:
+	case RTL_GIGA_MAC_VER_19:
+	case RTL_GIGA_MAC_VER_20:
+	case RTL_GIGA_MAC_VER_21:
+	case RTL_GIGA_MAC_VER_22:
+	case RTL_GIGA_MAC_VER_23:
+	case RTL_GIGA_MAC_VER_24:
+	case RTL_GIGA_MAC_VER_34:
+	case RTL_GIGA_MAC_VER_35:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
+		break;
+	case RTL_GIGA_MAC_VER_40:
+	case RTL_GIGA_MAC_VER_41:
+	case RTL_GIGA_MAC_VER_42:
+	case RTL_GIGA_MAC_VER_43:
+	case RTL_GIGA_MAC_VER_44:
+	case RTL_GIGA_MAC_VER_45:
+	case RTL_GIGA_MAC_VER_46:
+	case RTL_GIGA_MAC_VER_47:
+	case RTL_GIGA_MAC_VER_48:
+	case RTL_GIGA_MAC_VER_49:
+	case RTL_GIGA_MAC_VER_50:
+	case RTL_GIGA_MAC_VER_51:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
+		break;
+	default:
+		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST);
+		break;
+	}
+}
+
 static int rtl_set_mac_address(struct net_device *dev, void *p)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
@@ -4519,6 +4571,10 @@ static int rtl_set_mac_address(struct ne
 
 	pm_runtime_put_noidle(d);
 
+	/* Reportedly at least Asus X453MA truncates packets otherwise */
+	if (tp->mac_version == RTL_GIGA_MAC_VER_37)
+		rtl_init_rxcfg(tp);
+
 	return 0;
 }
 
@@ -4955,58 +5011,6 @@ static void rtl_init_pll_power_ops(struc
 		break;
 	}
 }
-
-static void rtl_init_rxcfg(struct rtl8169_private *tp)
-{
-	void __iomem *ioaddr = tp->mmio_addr;
-
-	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_01:
-	case RTL_GIGA_MAC_VER_02:
-	case RTL_GIGA_MAC_VER_03:
-	case RTL_GIGA_MAC_VER_04:
-	case RTL_GIGA_MAC_VER_05:
-	case RTL_GIGA_MAC_VER_06:
-	case RTL_GIGA_MAC_VER_10:
-	case RTL_GIGA_MAC_VER_11:
-	case RTL_GIGA_MAC_VER_12:
-	case RTL_GIGA_MAC_VER_13:
-	case RTL_GIGA_MAC_VER_14:
-	case RTL_GIGA_MAC_VER_15:
-	case RTL_GIGA_MAC_VER_16:
-	case RTL_GIGA_MAC_VER_17:
-		RTL_W32(RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
-		break;
-	case RTL_GIGA_MAC_VER_18:
-	case RTL_GIGA_MAC_VER_19:
-	case RTL_GIGA_MAC_VER_20:
-	case RTL_GIGA_MAC_VER_21:
-	case RTL_GIGA_MAC_VER_22:
-	case RTL_GIGA_MAC_VER_23:
-	case RTL_GIGA_MAC_VER_24:
-	case RTL_GIGA_MAC_VER_34:
-	case RTL_GIGA_MAC_VER_35:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
-		break;
-	case RTL_GIGA_MAC_VER_40:
-	case RTL_GIGA_MAC_VER_41:
-	case RTL_GIGA_MAC_VER_42:
-	case RTL_GIGA_MAC_VER_43:
-	case RTL_GIGA_MAC_VER_44:
-	case RTL_GIGA_MAC_VER_45:
-	case RTL_GIGA_MAC_VER_46:
-	case RTL_GIGA_MAC_VER_47:
-	case RTL_GIGA_MAC_VER_48:
-	case RTL_GIGA_MAC_VER_49:
-	case RTL_GIGA_MAC_VER_50:
-	case RTL_GIGA_MAC_VER_51:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST | RX_EARLY_OFF);
-		break;
-	default:
-		RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST);
-		break;
-	}
-}
 
 static void rtl8169_init_ring_indexes(struct rtl8169_private *tp)
 {

[PATCH 4.14 009/191] binder: fix UAF when releasing todo list

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@google.com>

commit f3277cbfba763cd2826396521b9296de67cf1bbc upstream.

When releasing a thread todo list when tearing down
a binder_proc, the following race was possible which
could result in a use-after-free:

1.  Thread 1: enter binder_release_work from binder_thread_release
2.  Thread 2: binder_update_ref_for_handle() -> binder_dec_node_ilocked()
3.  Thread 2: dec nodeA --> 0 (will free node)
4.  Thread 1: ACQ inner_proc_lock
5.  Thread 2: block on inner_proc_lock
6.  Thread 1: dequeue work (BINDER_WORK_NODE, part of nodeA)
7.  Thread 1: REL inner_proc_lock
8.  Thread 2: ACQ inner_proc_lock
9.  Thread 2: todo list cleanup, but work was already dequeued
10. Thread 2: free node
11. Thread 2: REL inner_proc_lock
12. Thread 1: deref w->type (UAF)

The problem was that for a BINDER_WORK_NODE, the binder_work element
must not be accessed after releasing the inner_proc_lock while
processing the todo list elements since another thread might be
handling a deref on the node containing the binder_work element
leading to the node being freed.

Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20201009232455.4054810-1-tkjos@google.com
Cc: <stable@vger.kernel.org> # 4.14, 4.19, 5.4, 5.8
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/android/binder.c |   35 ++++++++++-------------------------
 1 file changed, 10 insertions(+), 25 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -286,7 +286,7 @@ struct binder_device {
 struct binder_work {
 	struct list_head entry;
 
-	enum {
+	enum binder_work_type {
 		BINDER_WORK_TRANSACTION = 1,
 		BINDER_WORK_TRANSACTION_COMPLETE,
 		BINDER_WORK_RETURN_ERROR,
@@ -850,27 +850,6 @@ static struct binder_work *binder_dequeu
 	return w;
 }
 
-/**
- * binder_dequeue_work_head() - Dequeues the item at head of list
- * @proc:         binder_proc associated with list
- * @list:         list to dequeue head
- *
- * Removes the head of the list if there are items on the list
- *
- * Return: pointer dequeued binder_work, NULL if list was empty
- */
-static struct binder_work *binder_dequeue_work_head(
-					struct binder_proc *proc,
-					struct list_head *list)
-{
-	struct binder_work *w;
-
-	binder_inner_proc_lock(proc);
-	w = binder_dequeue_work_head_ilocked(list);
-	binder_inner_proc_unlock(proc);
-	return w;
-}
-
 static void
 binder_defer_work(struct binder_proc *proc, enum binder_deferred_state defer);
 static void binder_free_thread(struct binder_thread *thread);
@@ -4162,13 +4141,17 @@ static void binder_release_work(struct b
 				struct list_head *list)
 {
 	struct binder_work *w;
+	enum binder_work_type wtype;
 
 	while (1) {
-		w = binder_dequeue_work_head(proc, list);
+		binder_inner_proc_lock(proc);
+		w = binder_dequeue_work_head_ilocked(list);
+		wtype = w ? w->type : 0;
+		binder_inner_proc_unlock(proc);
 		if (!w)
 			return;
 
-		switch (w->type) {
+		switch (wtype) {
 		case BINDER_WORK_TRANSACTION: {
 			struct binder_transaction *t;
 
@@ -4202,9 +4185,11 @@ static void binder_release_work(struct b
 			kfree(death);
 			binder_stats_deleted(BINDER_STAT_DEATH);
 		} break;
+		case BINDER_WORK_NODE:
+			break;
 		default:
 			pr_err("unexpected work type, %d, not freed\n",
-			       w->type);
+			       wtype);
 			break;
 		}
 	}

[PATCH 4.14 010/191] ALSA: bebob: potential info leak in hwdep_read()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit b41c15f4e1c1f1657da15c482fa837c1b7384452 upstream.

The "count" variable needs to be capped on every path so that we don't
copy too much information to the user.

Fixes: 618eabeae711 ("ALSA: bebob: Add hwdep interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201007074928.GA2529578@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/bebob/bebob_hwdep.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/sound/firewire/bebob/bebob_hwdep.c
+++ b/sound/firewire/bebob/bebob_hwdep.c
@@ -37,12 +37,11 @@ hwdep_read(struct snd_hwdep *hwdep, char
 	}
 
 	memset(&event, 0, sizeof(event));
+	count = min_t(long, count, sizeof(event.lock_status));
 	if (bebob->dev_lock_changed) {
 		event.lock_status.type = SNDRV_FIREWIRE_EVENT_LOCK_STATUS;
 		event.lock_status.status = (bebob->dev_lock_count > 0);
 		bebob->dev_lock_changed = false;
-
-		count = min_t(long, count, sizeof(event.lock_status));
 	}
 
 	spin_unlock_irq(&bebob->lock);

[PATCH 4.14 011/191] net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 01c4ceae0a38a0bdbfea6896f41efcd985a9c064 ]

The hdlc_rcv function is used as hdlc_packet_type.func to process any
skb received in the kernel with skb->protocol == htons(ETH_P_HDLC).
The purpose of this function is to provide second-stage processing for
skbs not assigned a "real" L3 skb->protocol value in the first stage.

This function assumes the device from which the skb is received is an
HDLC device (a device created by this module). It assumes that
netdev_priv(dev) returns a pointer to "struct hdlc_device".

However, it is possible that some driver in the kernel (not necessarily
in our control) submits a received skb with skb->protocol ==
htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would
still be received by hdlc_rcv. This will cause problems.

hdlc_rcv should be able to recognize and drop invalid skbs. It should
first make sure "dev" is actually an HDLC device, before starting its
processing. This patch adds this check to hdlc_rcv.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201020013152.89259-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/hdlc.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -49,7 +49,15 @@ static struct hdlc_proto *first_proto;
 static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
 		    struct packet_type *p, struct net_device *orig_dev)
 {
-	struct hdlc_device *hdlc = dev_to_hdlc(dev);
+	struct hdlc_device *hdlc;
+
+	/* First make sure "dev" is an HDLC device */
+	if (!(dev->priv_flags & IFF_WAN_HDLC)) {
+		kfree_skb(skb);
+		return NET_RX_SUCCESS;
+	}
+
+	hdlc = dev_to_hdlc(dev);
 
 	if (!net_eq(dev_net(dev), &init_net)) {
 		kfree_skb(skb);

[PATCH 4.14 012/191] net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 5fce1e43e2d5bf2f7e3224d7b99b1c65ab2c26e2 ]

This driver calls ether_setup to set up the network device.
The ether_setup function would add the IFF_TX_SKB_SHARING flag to the
device. This flag indicates that it is safe to transmit shared skbs to
the device.

However, this is not true. This driver may pad the frame (in eth_tx)
before transmission, so the skb may be modified.

Fixes: 550fd08c2ceb ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared")
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201020063420.187497-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/hdlc_raw_eth.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wan/hdlc_raw_eth.c
+++ b/drivers/net/wan/hdlc_raw_eth.c
@@ -102,6 +102,7 @@ static int raw_eth_ioctl(struct net_devi
 		old_qlen = dev->tx_queue_len;
 		ether_setup(dev);
 		dev->tx_queue_len = old_qlen;
+		dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 		eth_hw_addr_random(dev);
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_off(dev);

[PATCH 4.14 013/191] nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()

[Greg Kroah-Hartman]

From: Defang Bo <bodefang@126.com>

[ Upstream commit 280e3ebdafb863b3cb50d5842f056267e15bf40c ]

Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by
the netlink client prior to accessing them.This prevents potential
unhandled NULL pointer dereference exceptions which can be triggered
by malicious user-mode programs, if they omit one or both of these
attributes.

Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler").

Fixes: 9674da8759df ("NFC: Add firmware upload netlink command")
Signed-off-by: Defang Bo <bodefang@126.com>
Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/netlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1224,7 +1224,7 @@ static int nfc_genl_fw_download(struct s
 	u32 idx;
 	char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
 
-	if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+	if (!info->attrs[NFC_ATTR_DEVICE_INDEX] || !info->attrs[NFC_ATTR_FIRMWARE_NAME])
 		return -EINVAL;
 
 	idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);

[PATCH 4.14 014/191] tcp: fix to update snd_wl1 in bulk receiver fast path

[Greg Kroah-Hartman]

From: Neal Cardwell <ncardwell@google.com>

[ Upstream commit 18ded910b589839e38a51623a179837ab4cc3789 ]

In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
   after(ack_seq, tp->snd_wl1)

If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".

The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.

This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).

This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Link: https://www.spinics.net/lists/netdev/msg692430.html
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5539,6 +5539,8 @@ void tcp_rcv_established(struct sock *sk
 				tcp_data_snd_check(sk);
 				if (!inet_csk_ack_scheduled(sk))
 					goto no_ack;
+			} else {
+				tcp_update_wl(tp, TCP_SKB_CB(skb)->seq);
 			}
 
 			__tcp_ack_snd_check(sk, 0);

[PATCH 4.14 015/191] icmp: randomize the global rate limiter

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit b38e7819cae946e2edf869e604af1e65a5d241c5 ]

Keyu Man reported that the ICMP rate limiter could be used
by attackers to get useful signal. Details will be provided
in an upcoming academic publication.

Our solution is to add some noise, so that the attackers
no longer can get help from the predictable token bucket limiter.

Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/networking/ip-sysctl.txt |    4 +++-
 net/ipv4/icmp.c                        |    7 +++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -905,12 +905,14 @@ icmp_ratelimit - INTEGER
 icmp_msgs_per_sec - INTEGER
 	Limit maximal number of ICMP packets sent per second from this host.
 	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
+	controlled by this limit. For security reasons, the precise count
+	of messages per second is randomized.
 	Default: 1000
 
 icmp_msgs_burst - INTEGER
 	icmp_msgs_per_sec controls number of ICMP packets sent per second,
 	while icmp_msgs_burst controls the burst size of these packets.
+	For security reasons, the precise burst size is randomized.
 	Default: 50
 
 icmp_ratemask - INTEGER
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -244,7 +244,7 @@ static struct {
 /**
  * icmp_global_allow - Are we allowed to send one more ICMP message ?
  *
- * Uses a token bucket to limit our ICMP messages to sysctl_icmp_msgs_per_sec.
+ * Uses a token bucket to limit our ICMP messages to ~sysctl_icmp_msgs_per_sec.
  * Returns false if we reached the limit and can not send another packet.
  * Note: called with BH disabled
  */
@@ -272,7 +272,10 @@ bool icmp_global_allow(void)
 	}
 	credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
 	if (credit) {
-		credit--;
+		/* We want to use a credit of one in average, but need to randomize
+		 * it for security reasons.
+		 */
+		credit = max_t(int, credit - prandom_u32_max(3), 0);
 		rc = true;
 	}
 	WRITE_ONCE(icmp_global.credit, credit);

[PATCH 4.14 016/191] cifs: remove bogus debug code

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit d367cb960ce88914898cbfa43645c2e43ede9465 upstream.

The "end" pointer is either NULL or it points to the next byte to parse.
If there isn't a next byte then dereferencing "end" is an off-by-one out
of bounds error.  And, of course, if it's NULL that leads to an Oops.
Printing "*end" doesn't seem very useful so let's delete this code.

Also for the last debug statement, I noticed that it should be printing
"sequence_end" instead of "end" so fix that as well.

Reported-by: Dominik Maier <dmaier@sect.tu-berlin.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/asn1.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -541,8 +541,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
 		   || (tag != ASN1_EOC)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 0\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 0\n",
+			 cls, con, tag, end);
 		return 0;
 	}
 
@@ -552,8 +552,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
 		   || (tag != ASN1_SEQ)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 1\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 1\n",
+			 cls, con, tag, end);
 		return 0;
 	}
 
@@ -563,8 +563,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_CTX) || (con != ASN1_CON)
 		   || (tag != ASN1_EOC)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 0\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p exit 0\n",
+			 cls, con, tag, end);
 		return 0;
 	}
 
@@ -575,8 +575,8 @@ decode_negTokenInit(unsigned char *secur
 		return 0;
 	} else if ((cls != ASN1_UNI) || (con != ASN1_CON)
 		   || (tag != ASN1_SEQ)) {
-		cifs_dbg(FYI, "cls = %d con = %d tag = %d end = %p (%d) exit 1\n",
-			 cls, con, tag, end, *end);
+		cifs_dbg(FYI, "cls = %d con = %d tag = %d sequence_end = %p exit 1\n",
+			 cls, con, tag, sequence_end);
 		return 0;
 	}
 

[PATCH 4.14 017/191] cifs: Return the error from crypt_message when enc/dec key not found.

[Greg Kroah-Hartman]

From: Shyam Prasad N <sprasad@microsoft.com>

commit 0bd294b55a5de442370c29fa53bab17aef3ff318 upstream.

In crypt_message, when smb2_get_enc_key returns error, we need to
return the error back to the caller. If not, we end up processing
the message further, causing a kernel oops due to unwarranted access
of memory.

Call Trace:
smb3_receive_transform+0x120/0x870 [cifs]
cifs_demultiplex_thread+0xb53/0xc20 [cifs]
? cifs_handle_standard+0x190/0x190 [cifs]
kthread+0x116/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2ops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -2305,7 +2305,7 @@ crypt_message(struct TCP_Server_Info *se
 	if (rc) {
 		cifs_dbg(VFS, "%s: Could not get %scryption key\n", __func__,
 			 enc ? "en" : "de");
-		return 0;
+		return rc;
 	}
 
 	rc = smb3_crypto_aead_allocate(server);

[PATCH 4.14 018/191] KVM: x86/mmu: Commit zap of remaining invalid pages when recovering lpages

[Greg Kroah-Hartman]

From: Sean Christopherson <sean.j.christopherson@intel.com>

commit e89505698c9f70125651060547da4ff5046124fc upstream.

Call kvm_mmu_commit_zap_page() after exiting the "prepare zap" loop in
kvm_recover_nx_lpages() to finish zapping pages in the unlikely event
that the loop exited due to lpage_disallowed_mmu_pages being empty.
Because the recovery thread drops mmu_lock() when rescheduling, it's
possible that lpage_disallowed_mmu_pages could be emptied by a different
thread without to_zap reaching zero despite to_zap being derived from
the number of disallowed lpages.

Fixes: 1aa9b9572b105 ("kvm: x86: mmu: Recovery of shattered NX large pages")
Cc: Junaid Shahid <junaids@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923183735.584-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/mmu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -5846,6 +5846,7 @@ static void kvm_recover_nx_lpages(struct
 				cond_resched_lock(&kvm->mmu_lock);
 		}
 	}
+	kvm_mmu_commit_zap_page(kvm, &invalid_list);
 
 	spin_unlock(&kvm->mmu_lock);
 	srcu_read_unlock(&kvm->srcu, rcu_idx);

[PATCH 4.14 019/191] KVM: SVM: Initialize prev_ga_tag before use

[Greg Kroah-Hartman]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

commit f6426ab9c957e97418ac5b0466538792767b1738 upstream.

The function amd_ir_set_vcpu_affinity makes use of the parameter struct
amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct
amd_iommu_pi_data from a list when not running in AVIC mode.

However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero
uninitialized value can cause unintended code path, which ends up making
use of the struct vcpu_svm.ir_list and ir_list_lock without being
initialized (since they are intended only for the AVIC case).

This triggers NULL pointer dereference bug in the function vm_ir_list_del
with the following call trace:

    svm_update_pi_irte+0x3c2/0x550 [kvm_amd]
    ? proc_create_single_data+0x41/0x50
    kvm_arch_irq_bypass_add_producer+0x40/0x60 [kvm]
    __connect+0x5f/0xb0 [irqbypass]
    irq_bypass_register_producer+0xf8/0x120 [irqbypass]
    vfio_msi_set_vector_signal+0x1de/0x2d0 [vfio_pci]
    vfio_msi_set_block+0x77/0xe0 [vfio_pci]
    vfio_pci_set_msi_trigger+0x25c/0x2f0 [vfio_pci]
    vfio_pci_set_irqs_ioctl+0x88/0xb0 [vfio_pci]
    vfio_pci_ioctl+0x2ea/0xed0 [vfio_pci]
    ? alloc_file_pseudo+0xa5/0x100
    vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    ? vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
    __x64_sys_ioctl+0x96/0xd0
    do_syscall_64+0x37/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Therefore, initialize prev_ga_tag to zero before use. This should be safe
because ga_tag value 0 is invalid (see function avic_vm_init).

Fixes: dfa20099e26e ("KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20201003232707.4662-1-suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/svm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -4862,6 +4862,7 @@ static int svm_update_pi_irte(struct kvm
 			 * - Tell IOMMU to use legacy mode for this interrupt.
 			 * - Retrieve ga_tag of prior interrupt remapping data.
 			 */
+			pi.prev_ga_tag = 0;
 			pi.is_guest_mode = false;
 			ret = irq_set_vcpu_affinity(host_irq, &pi);
 

[PATCH 4.14 020/191] ima: Dont ignore errors from crypto_shash_update()

[Greg Kroah-Hartman]

From: Roberto Sassu <roberto.sassu@huawei.com>

commit 60386b854008adc951c470067f90a2d85b5d520f upstream.

Errors returned by crypto_shash_update() are not checked in
ima_calc_boot_aggregate_tfm() and thus can be overwritten at the next
iteration of the loop. This patch adds a check after calling
crypto_shash_update() and returns immediately if the result is not zero.

Cc: stable@vger.kernel.org
Fixes: 3323eec921efd ("integrity: IMA as an integrity service provider")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/integrity/ima/ima_crypto.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -699,6 +699,8 @@ static int __init ima_calc_boot_aggregat
 		ima_pcrread(i, pcr_i);
 		/* now accumulate with current aggregate */
 		rc = crypto_shash_update(shash, pcr_i, TPM_DIGEST_SIZE);
+		if (rc != 0)
+			return rc;
 	}
 	if (!rc)
 		crypto_shash_final(shash, digest);

[PATCH 4.14 021/191] crypto: algif_aead - Do not set MAY_BACKLOG on the async path

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

commit cbdad1f246dd98e6c9c32a6e5212337f542aa7e0 upstream.

The async path cannot use MAY_BACKLOG because it is not meant to
block, which is what MAY_BACKLOG does.  On the other hand, both
the sync and async paths can make use of MAY_SLEEP.

Fixes: 83094e5e9e49 ("crypto: af_alg - add async support to...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/algif_aead.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/crypto/algif_aead.c
+++ b/crypto/algif_aead.c
@@ -83,7 +83,7 @@ static int crypto_aead_copy_sgl(struct c
 	SKCIPHER_REQUEST_ON_STACK(skreq, null_tfm);
 
 	skcipher_request_set_tfm(skreq, null_tfm);
-	skcipher_request_set_callback(skreq, CRYPTO_TFM_REQ_MAY_BACKLOG,
+	skcipher_request_set_callback(skreq, CRYPTO_TFM_REQ_MAY_SLEEP,
 				      NULL, NULL);
 	skcipher_request_set_crypt(skreq, src, dst, len, NULL);
 
@@ -296,19 +296,20 @@ static int _aead_recvmsg(struct socket *
 		areq->outlen = outlen;
 
 		aead_request_set_callback(&areq->cra_u.aead_req,
-					  CRYPTO_TFM_REQ_MAY_BACKLOG,
+					  CRYPTO_TFM_REQ_MAY_SLEEP,
 					  af_alg_async_cb, areq);
 		err = ctx->enc ? crypto_aead_encrypt(&areq->cra_u.aead_req) :
 				 crypto_aead_decrypt(&areq->cra_u.aead_req);
 
 		/* AIO operation in progress */
-		if (err == -EINPROGRESS || err == -EBUSY)
+		if (err == -EINPROGRESS)
 			return -EIOCBQUEUED;
 
 		sock_put(sk);
 	} else {
 		/* Synchronous operation */
 		aead_request_set_callback(&areq->cra_u.aead_req,
+					  CRYPTO_TFM_REQ_MAY_SLEEP |
 					  CRYPTO_TFM_REQ_MAY_BACKLOG,
 					  af_alg_complete, &ctx->completion);
 		err = af_alg_wait_for_completion(ctx->enc ?

[PATCH 4.14 022/191] EDAC/i5100: Fix error handling order in i5100_init_one()

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 857a3139bd8be4f702c030c8ca06f3fd69c1741a ]

When pci_get_device_func() fails, the driver doesn't need to execute
pci_dev_put(). mci should still be freed, though, to prevent a memory
leak. When pci_enable_device() fails, the error injection PCI device
"einj" doesn't need to be disabled either.

 [ bp: Massage commit message, rename label to "bail_mc_free". ]

Fixes: 52608ba205461 ("i5100_edac: probe for device 19 function 0")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200826121437.31606-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/i5100_edac.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index b506eef6b146d..858ef4e15180b 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -1072,16 +1072,15 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 				    PCI_DEVICE_ID_INTEL_5100_19, 0);
 	if (!einj) {
 		ret = -ENODEV;
-		goto bail_einj;
+		goto bail_mc_free;
 	}
 
 	rc = pci_enable_device(einj);
 	if (rc < 0) {
 		ret = rc;
-		goto bail_disable_einj;
+		goto bail_einj;
 	}
 
-
 	mci->pdev = &pdev->dev;
 
 	priv = mci->pvt_info;
@@ -1147,14 +1146,14 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 bail_scrub:
 	priv->scrub_enable = 0;
 	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
-	edac_mc_free(mci);
-
-bail_disable_einj:
 	pci_disable_device(einj);
 
 bail_einj:
 	pci_dev_put(einj);
 
+bail_mc_free:
+	edac_mc_free(mci);
+
 bail_disable_ch1:
 	pci_disable_device(ch1mm);
 
-- 
2.25.1

[PATCH 4.14 023/191] x86/fpu: Allow multiple bits in clearcpuid= parameter

[Greg Kroah-Hartman]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 0a4bb5e5507a585532cc413125b921c8546fc39f ]

Commit

  0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")

changed clearcpuid parsing from __setup() to cmdline_find_option().
While the __setup() function would have been called for each clearcpuid=
parameter on the command line, cmdline_find_option() will only return
the last one, so the change effectively made it impossible to disable
more than one bit.

Allow a comma-separated list of bit numbers as the argument for
clearcpuid to allow multiple bits to be disabled again. Log the bits
being disabled for informational purposes.

Also fix the check on the return value of cmdline_find_option(). It
returns -1 when the option is not found, so testing as a boolean is
incorrect.

Fixes: 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907213919.2423441-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         |  2 +-
 arch/x86/kernel/fpu/init.c                    | 30 ++++++++++++++-----
 2 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index dc96e7f10ebcd..0a59fcf934f43 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -552,7 +552,7 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clearcpuid=BITNUM [X86]
+	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 6abd83572b016..9692ccc583bb3 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -249,9 +249,9 @@ static void __init fpu__init_system_ctx_switch(void)
  */
 static void __init fpu__init_parse_early_param(void)
 {
-	char arg[32];
+	char arg[128];
 	char *argptr = arg;
-	int bit;
+	int arglen, res, bit;
 
 	if (cmdline_find_option_bool(boot_command_line, "no387"))
 		setup_clear_cpu_cap(X86_FEATURE_FPU);
@@ -271,12 +271,26 @@ static void __init fpu__init_parse_early_param(void)
 	if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
 		setup_clear_cpu_cap(X86_FEATURE_XSAVES);
 
-	if (cmdline_find_option(boot_command_line, "clearcpuid", arg,
-				sizeof(arg)) &&
-	    get_option(&argptr, &bit) &&
-	    bit >= 0 &&
-	    bit < NCAPINTS * 32)
-		setup_clear_cpu_cap(bit);
+	arglen = cmdline_find_option(boot_command_line, "clearcpuid", arg, sizeof(arg));
+	if (arglen <= 0)
+		return;
+
+	pr_info("Clearing CPUID bits:");
+	do {
+		res = get_option(&argptr, &bit);
+		if (res == 0 || res == 3)
+			break;
+
+		/* If the argument was too long, the last bit may be cut off */
+		if (res == 1 && arglen >= sizeof(arg))
+			break;
+
+		if (bit >= 0 && bit < NCAPINTS * 32) {
+			pr_cont(" " X86_CAP_FMT, x86_cap_flag(bit));
+			setup_clear_cpu_cap(bit);
+		}
+	} while (res == 2);
+	pr_cont("\n");
 }
 
 /*
-- 
2.25.1

[PATCH 4.14 024/191] drivers/perf: xgene_pmu: Fix uninitialized resource struct

[Greg Kroah-Hartman]

From: Mark Salter <msalter@redhat.com>

[ Upstream commit a76b8236edcf5b785d044b930f9e14ad02b4a484 ]

This splat was reported on newer Fedora kernels booting on certain
X-gene based machines:

 xgene-pmu APMC0D83:00: X-Gene PMU version 3
 Unable to handle kernel read from unreadable memory at virtual \
 address 0000000000004006
 ...
 Call trace:
  string+0x50/0x100
  vsnprintf+0x160/0x750
  devm_kvasprintf+0x5c/0xb4
  devm_kasprintf+0x54/0x60
  __devm_ioremap_resource+0xdc/0x1a0
  devm_ioremap_resource+0x14/0x20
  acpi_get_pmu_hw_inf.isra.0+0x84/0x15c
  acpi_pmu_dev_add+0xbc/0x21c
  acpi_ns_walk_namespace+0x16c/0x1e4
  acpi_walk_namespace+0xb4/0xfc
  xgene_pmu_probe_pmu_dev+0x7c/0xe0
  xgene_pmu_probe.part.0+0x2c0/0x310
  xgene_pmu_probe+0x54/0x64
  platform_drv_probe+0x60/0xb4
  really_probe+0xe8/0x4a0
  driver_probe_device+0xe4/0x100
  device_driver_attach+0xcc/0xd4
  __driver_attach+0xb0/0x17c
  bus_for_each_dev+0x6c/0xb0
  driver_attach+0x30/0x40
  bus_add_driver+0x154/0x250
  driver_register+0x84/0x140
  __platform_driver_register+0x54/0x60
  xgene_pmu_driver_init+0x28/0x34
  do_one_initcall+0x40/0x204
  do_initcalls+0x104/0x144
  kernel_init_freeable+0x198/0x210
  kernel_init+0x20/0x12c
  ret_from_fork+0x10/0x18
 Code: 91000400 110004e1 eb08009f 540000c0 (38646846)
 ---[ end trace f08c10566496a703 ]---

This is due to use of an uninitialized local resource struct in the xgene
pmu driver. The thunderx2_pmu driver avoids this by using the resource list
constructed by acpi_dev_get_resources() rather than using a callback from
that function. The callback in the xgene driver didn't fully initialize
the resource. So get rid of the callback and search the resource list as
done by thunderx2.

Fixes: 832c927d119b ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-1-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/xgene_pmu.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c
index 8b79c2f7931f1..806fb1f415c29 100644
--- a/drivers/perf/xgene_pmu.c
+++ b/drivers/perf/xgene_pmu.c
@@ -1474,17 +1474,6 @@ static char *xgene_pmu_dev_name(struct device *dev, u32 type, int id)
 }
 
 #if defined(CONFIG_ACPI)
-static int acpi_pmu_dev_add_resource(struct acpi_resource *ares, void *data)
-{
-	struct resource *res = data;
-
-	if (ares->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32)
-		acpi_dev_resource_memory(ares, res);
-
-	/* Always tell the ACPI core to skip this resource */
-	return 1;
-}
-
 static struct
 xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
 				       struct acpi_device *adev, u32 type)
@@ -1496,6 +1485,7 @@ xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
 	struct hw_pmu_info *inf;
 	void __iomem *dev_csr;
 	struct resource res;
+	struct resource_entry *rentry;
 	int enable_bit;
 	int rc;
 
@@ -1504,11 +1494,23 @@ xgene_pmu_dev_ctx *acpi_get_pmu_hw_inf(struct xgene_pmu *xgene_pmu,
 		return NULL;
 
 	INIT_LIST_HEAD(&resource_list);
-	rc = acpi_dev_get_resources(adev, &resource_list,
-				    acpi_pmu_dev_add_resource, &res);
+	rc = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (rc <= 0) {
+		dev_err(dev, "PMU type %d: No resources found\n", type);
+		return NULL;
+	}
+
+	list_for_each_entry(rentry, &resource_list, node) {
+		if (resource_type(rentry->res) == IORESOURCE_MEM) {
+			res = *rentry->res;
+			rentry = NULL;
+			break;
+		}
+	}
 	acpi_dev_free_resource_list(&resource_list);
-	if (rc < 0) {
-		dev_err(dev, "PMU type %d: No resource address found\n", type);
+
+	if (rentry) {
+		dev_err(dev, "PMU type %d: No memory resource found\n", type);
 		return NULL;
 	}
 
-- 
2.25.1

[PATCH 4.14 025/191] crypto: algif_skcipher - EBUSY on aio should be an error

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 2a05b029c1ee045b886ebf9efef9985ca23450de ]

I removed the MAY_BACKLOG flag on the aio path a while ago but
the error check still incorrectly interpreted EBUSY as success.
This may cause the submitter to wait for a request that will never
complete.

Fixes: dad419970637 ("crypto: algif_skcipher - Do not set...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/algif_skcipher.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/crypto/algif_skcipher.c b/crypto/algif_skcipher.c
index d9ec5dca86729..a9dc4eeddcd53 100644
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -133,7 +133,7 @@ static int _skcipher_recvmsg(struct socket *sock, struct msghdr *msg,
 			crypto_skcipher_decrypt(&areq->cra_u.skcipher_req);
 
 		/* AIO operation in progress */
-		if (err == -EINPROGRESS || err == -EBUSY)
+		if (err == -EINPROGRESS)
 			return -EIOCBQUEUED;
 
 		sock_put(sk);
-- 
2.25.1

[PATCH 4.14 026/191] crypto: mediatek - Fix wrong return value in mtk_desc_ring_alloc()

[Greg Kroah-Hartman]

From: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>

[ Upstream commit 8cbde6c6a6d2b1599ff90f932304aab7e32fce89 ]

In case of memory allocation failure, a negative error code should
be returned.

Fixes: 785e5c616c849 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mediatek/mtk-platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/mediatek/mtk-platform.c b/drivers/crypto/mediatek/mtk-platform.c
index b182e941b0cd8..c58e708d30395 100644
--- a/drivers/crypto/mediatek/mtk-platform.c
+++ b/drivers/crypto/mediatek/mtk-platform.c
@@ -445,7 +445,7 @@ static void mtk_desc_dma_free(struct mtk_cryp *cryp)
 static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
 {
 	struct mtk_ring **ring = cryp->ring;
-	int i, err = ENOMEM;
+	int i;
 
 	for (i = 0; i < MTK_RING_MAX; i++) {
 		ring[i] = kzalloc(sizeof(**ring), GFP_KERNEL);
@@ -479,7 +479,7 @@ static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
 				  ring[i]->cmd_base, ring[i]->cmd_dma);
 		kfree(ring[i]);
 	}
-	return err;
+	return -ENOMEM;
 }
 
 static int mtk_crypto_probe(struct platform_device *pdev)
-- 
2.25.1

[PATCH 4.14 027/191] crypto: ixp4xx - Fix the size used in a dma_free_coherent() call

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit f7ade9aaf66bd5599690acf0597df2c0f6cd825a ]

Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()', in 'setup_crypt_desc()'.

Fixes: 81bef0150074 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ixp4xx_crypto.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index dadc4a808df5a..4b6773c345ab7 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -531,7 +531,7 @@ static void release_ixp_crypto(struct device *dev)
 
 	if (crypt_virt) {
 		dma_free_coherent(dev,
-			NPE_QLEN_TOTAL * sizeof( struct crypt_ctl),
+			NPE_QLEN * sizeof(struct crypt_ctl),
 			crypt_virt, crypt_phys);
 	}
 	return;
-- 
2.25.1

[PATCH 4.14 028/191] media: tuner-simple: fix regression in simple_set_radio_freq

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 505bfc2a142f12ce7bc7a878b44abc3496f2e747 ]

clang static analysis reports this problem

tuner-simple.c:714:13: warning: Assigned value is
  garbage or undefined
        buffer[1] = buffer[3];
                  ^ ~~~~~~~~~
In simple_set_radio_freq buffer[3] used to be done
in-function with a switch of tuner type, now done
by a call to simple_radio_bandswitch which has this case

	case TUNER_TENA_9533_DI:
	case TUNER_YMEC_TVF_5533MF:
		tuner_dbg("This tuner doesn't ...
		return 0;

which does not set buffer[3].  In the old logic, this case
would have returned 0 from simple_set_radio_freq.

Recover this old behavior by returning an error for this
codition. Since the old simple_set_radio_freq behavior
returned a 0, do the same.

Fixes: c7a9f3aa1e1b ("V4L/DVB (7129): tuner-simple: move device-specific code into three separate functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/tuners/tuner-simple.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/tuners/tuner-simple.c b/drivers/media/tuners/tuner-simple.c
index cf44d3657f555..9b2501046bd14 100644
--- a/drivers/media/tuners/tuner-simple.c
+++ b/drivers/media/tuners/tuner-simple.c
@@ -499,7 +499,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
 	case TUNER_TENA_9533_DI:
 	case TUNER_YMEC_TVF_5533MF:
 		tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n");
-		return 0;
+		return -EINVAL;
 	case TUNER_PHILIPS_FM1216ME_MK3:
 	case TUNER_PHILIPS_FM1236_MK3:
 	case TUNER_PHILIPS_FMD1216ME_MK3:
@@ -700,7 +700,8 @@ static int simple_set_radio_freq(struct dvb_frontend *fe,
 		    TUNER_RATIO_SELECT_50; /* 50 kHz step */
 
 	/* Bandswitch byte */
-	simple_radio_bandswitch(fe, &buffer[0]);
+	if (simple_radio_bandswitch(fe, &buffer[0]))
+		return 0;
 
 	/* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
 	   freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
-- 
2.25.1

[PATCH 4.14 029/191] media: Revert "media: exynos4-is: Add missed check for pinctrl_lookup_state()"

[Greg Kroah-Hartman]

From: Sylwester Nawrocki <s.nawrocki@samsung.com>

[ Upstream commit 00d21f325d58567d81d9172096692d0a9ea7f725 ]

The "idle" pinctrl state is optional as documented in the DT binding.
The change introduced by the commit being reverted makes that pinctrl state
mandatory and breaks initialization of the whole media driver, since the
"idle" state is not specified in any mainline dts.

This reverts commit 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
to fix the regression.

Fixes: 18ffec750578 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/media-dev.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index f772c9b92d9ba..d313f9078e714 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1256,11 +1256,9 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd)
 	if (IS_ERR(pctl->state_default))
 		return PTR_ERR(pctl->state_default);
 
+	/* PINCTRL_STATE_IDLE is optional */
 	pctl->state_idle = pinctrl_lookup_state(pctl->pinctrl,
 					PINCTRL_STATE_IDLE);
-	if (IS_ERR(pctl->state_idle))
-		return PTR_ERR(pctl->state_idle);
-
 	return 0;
 }
 
-- 
2.25.1

[PATCH 4.14 030/191] media: m5mols: Check function pointer in m5mols_sensor_power

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 52438c4463ac904d14bf3496765e67750766f3a6 ]

clang static analysis reports this error

m5mols_core.c:767:4: warning: Called function pointer
  is null (null dereference) [core.CallAndMessage]
    info->set_power(&client->dev, 0);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In other places, the set_power ptr is checked.
So add a check.

Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/m5mols/m5mols_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/m5mols/m5mols_core.c b/drivers/media/i2c/m5mols/m5mols_core.c
index 463534d44756e..9015ebc843b4e 100644
--- a/drivers/media/i2c/m5mols/m5mols_core.c
+++ b/drivers/media/i2c/m5mols/m5mols_core.c
@@ -755,7 +755,8 @@ static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
 
 		ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
 		if (ret) {
-			info->set_power(&client->dev, 0);
+			if (info->set_power)
+				info->set_power(&client->dev, 0);
 			return ret;
 		}
 
-- 
2.25.1

[PATCH 4.14 031/191] media: uvcvideo: Set media controller entity functions

[Greg Kroah-Hartman]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit d6834b4b58d110814aaf3469e7fd87d34ae5ae81 ]

The media controller core prints a warning when an entity is registered
without a function being set. This affects the uvcvideo driver, as the
warning was added without first addressing the issue in existing
drivers. The problem is harmless, but unnecessarily worries users. Fix
it by mapping UVC entity types to MC entity functions as accurately as
possible using the existing functions.

Fixes: b50bde4e476d ("[media] v4l2-subdev: use MEDIA_ENT_T_UNKNOWN for new subdevs")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_entity.c | 35 ++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/media/usb/uvc/uvc_entity.c b/drivers/media/usb/uvc/uvc_entity.c
index 554063c07d7a2..f2457953f27c6 100644
--- a/drivers/media/usb/uvc/uvc_entity.c
+++ b/drivers/media/usb/uvc/uvc_entity.c
@@ -78,10 +78,45 @@ static int uvc_mc_init_entity(struct uvc_video_chain *chain,
 	int ret;
 
 	if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) {
+		u32 function;
+
 		v4l2_subdev_init(&entity->subdev, &uvc_subdev_ops);
 		strlcpy(entity->subdev.name, entity->name,
 			sizeof(entity->subdev.name));
 
+		switch (UVC_ENTITY_TYPE(entity)) {
+		case UVC_VC_SELECTOR_UNIT:
+			function = MEDIA_ENT_F_VID_MUX;
+			break;
+		case UVC_VC_PROCESSING_UNIT:
+		case UVC_VC_EXTENSION_UNIT:
+			/* For lack of a better option. */
+			function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+			break;
+		case UVC_COMPOSITE_CONNECTOR:
+		case UVC_COMPONENT_CONNECTOR:
+			function = MEDIA_ENT_F_CONN_COMPOSITE;
+			break;
+		case UVC_SVIDEO_CONNECTOR:
+			function = MEDIA_ENT_F_CONN_SVIDEO;
+			break;
+		case UVC_ITT_CAMERA:
+			function = MEDIA_ENT_F_CAM_SENSOR;
+			break;
+		case UVC_TT_VENDOR_SPECIFIC:
+		case UVC_ITT_VENDOR_SPECIFIC:
+		case UVC_ITT_MEDIA_TRANSPORT_INPUT:
+		case UVC_OTT_VENDOR_SPECIFIC:
+		case UVC_OTT_DISPLAY:
+		case UVC_OTT_MEDIA_TRANSPORT_OUTPUT:
+		case UVC_EXTERNAL_VENDOR_SPECIFIC:
+		default:
+			function = MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN;
+			break;
+		}
+
+		entity->subdev.entity.function = function;
+
 		ret = media_entity_pads_init(&entity->subdev.entity,
 					entity->num_pads, entity->pads);
 
-- 
2.25.1

[PATCH 4.14 032/191] media: omap3isp: Fix memleak in isp_probe

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit d8fc21c17099635e8ebd986d042be65a6c6b5bd0 ]

When devm_ioremap_resource() fails, isp should be
freed just like other error paths in isp_probe.

Fixes: 8644cdf972dd6 ("[media] omap3isp: Replace many MMIO regions by two")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/omap3isp/isp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index b34b6a604f92f..c46402f3e88c1 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2304,8 +2304,10 @@ static int isp_probe(struct platform_device *pdev)
 		mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
 		isp->mmio_base[map_idx] =
 			devm_ioremap_resource(isp->dev, mem);
-		if (IS_ERR(isp->mmio_base[map_idx]))
-			return PTR_ERR(isp->mmio_base[map_idx]);
+		if (IS_ERR(isp->mmio_base[map_idx])) {
+			ret = PTR_ERR(isp->mmio_base[map_idx]);
+			goto error;
+		}
 	}
 
 	ret = isp_get_clocks(isp);
-- 
2.25.1

[PATCH 4.14 033/191] crypto: omap-sham - fix digcnt register handling with export/import

[Greg Kroah-Hartman]

From: Tero Kristo <t-kristo@ti.com>

[ Upstream commit 3faf757bad75f3fc1b2736f0431e295a073a7423 ]

Running export/import for hashes in peculiar order (mostly done by
openssl) can mess up the internal book keeping of the OMAP SHA core.
Fix by forcibly writing the correct DIGCNT back to hardware. This issue
was noticed while transitioning to openssl 1.1 support.

Fixes: 0d373d603202 ("crypto: omap-sham - Add OMAP4/AM33XX SHAM Support")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/omap-sham.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index 4e38b87c32284..e34e9561e77d6 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -455,6 +455,9 @@ static void omap_sham_write_ctrl_omap4(struct omap_sham_dev *dd, size_t length,
 	struct omap_sham_reqctx *ctx = ahash_request_ctx(dd->req);
 	u32 val, mask;
 
+	if (likely(ctx->digcnt))
+		omap_sham_write(dd, SHA_REG_DIGCNT(dd), ctx->digcnt);
+
 	/*
 	 * Setting ALGO_CONST only for the first iteration and
 	 * CLOSE_HASH only for the last one. Note that flags mode bits
-- 
2.25.1

[PATCH 4.14 034/191] cypto: mediatek - fix leaks in mtk_desc_ring_alloc

[Greg Kroah-Hartman]

From: Xiaoliang Pang <dawning.pang@gmail.com>

[ Upstream commit 228d284aac61283cde508a925d666f854b57af63 ]

In the init loop, if an error occurs in function 'dma_alloc_coherent',
then goto the err_cleanup section, after run i--,
in the array ring, the struct mtk_ring with index i will not be released,
causing memory leaks

Fixes: 785e5c616c849 ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Xiaoliang Pang <dawning.pang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mediatek/mtk-platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/mediatek/mtk-platform.c b/drivers/crypto/mediatek/mtk-platform.c
index c58e708d30395..b2b1e90a3079d 100644
--- a/drivers/crypto/mediatek/mtk-platform.c
+++ b/drivers/crypto/mediatek/mtk-platform.c
@@ -472,13 +472,13 @@ static int mtk_desc_ring_alloc(struct mtk_cryp *cryp)
 	return 0;
 
 err_cleanup:
-	for (; i--; ) {
+	do {
 		dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ,
 				  ring[i]->res_base, ring[i]->res_dma);
 		dma_free_coherent(cryp->dev, MTK_DESC_RING_SZ,
 				  ring[i]->cmd_base, ring[i]->cmd_dma);
 		kfree(ring[i]);
-	}
+	} while (i--);
 	return -ENOMEM;
 }
 
-- 
2.25.1

[PATCH 4.14 035/191] media: mx2_emmaprp: Fix memleak in emmaprp_probe

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 21d387b8d372f859d9e87fdcc7c3b4a432737f4d ]

When platform_get_irq() fails, we should release
vfd and unregister pcdev->v4l2_dev just like the
subsequent error paths.

Fixes: d4e192cc44914 ("media: mx2_emmaprp: Check for platform_get_irq() error")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mx2_emmaprp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c
index 951f2fd415b0d..163e825bf1aac 100644
--- a/drivers/media/platform/mx2_emmaprp.c
+++ b/drivers/media/platform/mx2_emmaprp.c
@@ -942,8 +942,11 @@ static int emmaprp_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pcdev);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
+	if (irq < 0) {
+		ret = irq;
+		goto rel_vdev;
+	}
+
 	ret = devm_request_irq(&pdev->dev, irq, emmaprp_irq, 0,
 			       dev_name(&pdev->dev), pcdev);
 	if (ret)
-- 
2.25.1

[PATCH 4.14 036/191] media: tc358743: initialize variable

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 274cf92d5dff5c2fec1a518078542ffe70d07646 ]

clang static analysis flags this error

tc358743.c:1468:9: warning: Branch condition evaluates
  to a garbage value
        return handled ? IRQ_HANDLED : IRQ_NONE;
               ^~~~~~~
handled should be initialized to false.

Fixes: d747b806abf4 ("[media] tc358743: add direct interrupt handling")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/tc358743.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index c9647e24a4a3a..f74c4f6814ebb 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1318,7 +1318,7 @@ static int tc358743_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 static irqreturn_t tc358743_irq_handler(int irq, void *dev_id)
 {
 	struct tc358743_state *state = dev_id;
-	bool handled;
+	bool handled = false;
 
 	tc358743_isr(&state->sd, 0, &handled);
 
-- 
2.25.1

[PATCH 4.14 037/191] media: platform: fcp: Fix a reference count leak.

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 63e36a381d92a9cded97e90d481ee22566557dd1 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

Fixes: 6eaafbdb668b ("[media] v4l: rcar-fcp: Keep the coding style consistent")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar-fcp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c
index 0047d144c9326..19502a1860cf5 100644
--- a/drivers/media/platform/rcar-fcp.c
+++ b/drivers/media/platform/rcar-fcp.c
@@ -106,8 +106,10 @@ int rcar_fcp_enable(struct rcar_fcp_device *fcp)
 		return 0;
 
 	ret = pm_runtime_get_sync(fcp->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(fcp->dev);
 		return ret;
+	}
 
 	return 0;
 }
-- 
2.25.1

[PATCH 4.14 038/191] media: s5p-mfc: Fix a reference count leak

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 78741ce98c2e36188e2343434406b0e0bc50b0e7 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

Fixes: c5086f130a77 ("[media] s5p-mfc: Use clock gating only on MFC v5 hardware")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 5e080f32b0e82..95abf2bd7ebae 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -83,8 +83,10 @@ int s5p_mfc_power_on(void)
 	int i, ret = 0;
 
 	ret = pm_runtime_get_sync(pm->device);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(pm->device);
 		return ret;
+	}
 
 	/* clock control */
 	for (i = 0; i < pm->num_clocks; i++) {
-- 
2.25.1

[PATCH 4.14 039/191] media: ti-vpe: Fix a missing check and reference count leak

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 7dae2aaaf432767ca7aa11fa84643a7c2600dbdd ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
And also, when the call of function vpe_runtime_get() failed,
we won't call vpe_runtime_put().
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails
inside vpe_runtime_get().

Fixes: 4571912743ac ("[media] v4l: ti-vpe: Add VPE mem to mem driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/vpe.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 2e8970c7e22da..bbd8bb611915c 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -2470,6 +2470,8 @@ static int vpe_runtime_get(struct platform_device *pdev)
 
 	r = pm_runtime_get_sync(&pdev->dev);
 	WARN_ON(r < 0);
+	if (r)
+		pm_runtime_put_noidle(&pdev->dev);
 	return r < 0 ? r : 0;
 }
 
-- 
2.25.1

[PATCH 4.14 040/191] regulator: resolve supply after creating regulator

[Greg Kroah-Hartman]

From: Michał Mirosław <mirq-linux@rere.qmqm.pl>

[ Upstream commit aea6cb99703e17019e025aa71643b4d3e0a24413 ]

When creating a new regulator its supply cannot create the sysfs link
because the device is not yet published. Remove early supply resolving
since it will be done later anyway. This makes the following error
disappear and the symlinks get created instead.

  DCDC_REG1: supplied by VSYS
  VSYS: could not add device link regulator.3 err -2

Note: It doesn't fix the problem for bypassed regulators, though.

Fixes: 45389c47526d ("regulator: core: Add early supply resolution for regulators")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ba09e0a8617ffeeb25cb4affffe6f3149319cef8.1601155770.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/core.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index bd6991a99593d..a3c265177855d 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4090,15 +4090,20 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	else if (regulator_desc->supply_name)
 		rdev->supply_name = regulator_desc->supply_name;
 
-	/*
-	 * Attempt to resolve the regulator supply, if specified,
-	 * but don't return an error if we fail because we will try
-	 * to resolve it again later as more regulators are added.
-	 */
-	if (regulator_resolve_supply(rdev))
-		rdev_dbg(rdev, "unable to resolve supply\n");
-
 	ret = set_machine_constraints(rdev, constraints);
+	if (ret == -EPROBE_DEFER) {
+		/* Regulator might be in bypass mode and so needs its supply
+		 * to set the constraints */
+		/* FIXME: this currently triggers a chicken-and-egg problem
+		 * when creating -SUPPLY symlink in sysfs to a regulator
+		 * that is just being created */
+		ret = regulator_resolve_supply(rdev);
+		if (!ret)
+			ret = set_machine_constraints(rdev, constraints);
+		else
+			rdev_dbg(rdev, "unable to resolve supply early: %pe\n",
+				 ERR_PTR(ret));
+	}
 	if (ret < 0)
 		goto wash;
 
-- 
2.25.1

[PATCH 4.14 041/191] ath10k: provide survey info as accumulated data

[Greg Kroah-Hartman]

From: Venkateswara Naralasetty <vnaralas@codeaurora.org>

[ Upstream commit 720e5c03e5cb26d33d97f55192b791bb48478aa5 ]

It is expected that the returned counters by .get_survey are monotonic
increasing. But the data from ath10k gets reset to zero regularly. Channel
active/busy time are then showing incorrect values (less than previous or
sometimes zero) for the currently active channel during successive survey
dump commands.

example:

  $ iw dev wlan0 survey dump
  Survey data from wlan0
  	frequency:                      5180 MHz [in use]
  	channel active time:            54995 ms
  	channel busy time:              432 ms
  	channel receive time:           0 ms
  	channel transmit time:          59 ms
  ...

  $ iw dev wlan0 survey dump
  Survey data from wlan0
  	frequency:                      5180 MHz [in use]
  	channel active time:            32592 ms
  	channel busy time:              254 ms
  	channel receive time:           0 ms
  	channel transmit time:          0 ms
  ...

The correct way to handle this is to use the non-clearing
WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will
then accumulate the survey data and handle wrap arounds.

Tested-on: QCA9984 hw1.0 10.4-3.5.3-00057
Tested-on: QCA988X hw2.0 10.2.4-1.0-00047
Tested-on: QCA9888 hw2.0 10.4-3.9.0.2-00024
Tested-on: QCA4019 hw1.0 10.4-3.6-00140

Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information")
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Tested-by: Markus Theil <markus.theil@tu-ilmenau.de>
Tested-by: John Deere <24601deerej@gmail.com>
[sven@narfation.org: adjust commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1592232686-28712-1-git-send-email-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ea47ad4b2343b..be4420ff52b8a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6718,7 +6718,7 @@ ath10k_mac_update_bss_chan_survey(struct ath10k *ar,
 				  struct ieee80211_channel *channel)
 {
 	int ret;
-	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR;
+	enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
-- 
2.25.1

[PATCH 4.14 042/191] Bluetooth: hci_uart: Cancel init work before unregistering

[Greg Kroah-Hartman]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit 3b799254cf6f481460719023d7a18f46651e5e7f ]

If hci_uart_tty_close() or hci_uart_unregister_device() is called while
hu->init_ready is scheduled, hci_register_dev() could be called after
the hci_uart is torn down. Avoid this by ensuring the work is complete
or canceled before checking the HCI_UART_REGISTERED flag.

Fixes: 9f2aee848fe6 ("Bluetooth: Add delayed init sequence support for UART controllers")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_ldisc.c  | 1 +
 drivers/bluetooth/hci_serdev.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 43221def1d29f..f19606019eb01 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -541,6 +541,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
 		percpu_up_write(&hu->proto_lock);
 
+		cancel_work_sync(&hu->init_ready);
 		cancel_work_sync(&hu->write_work);
 
 		if (hdev) {
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index 72cf2d97b682c..196b046658ff4 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -361,6 +361,8 @@ void hci_uart_unregister_device(struct hci_uart *hu)
 	struct hci_dev *hdev = hu->hdev;
 
 	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+
+	cancel_work_sync(&hu->init_ready);
 	if (test_bit(HCI_UART_REGISTERED, &hu->flags))
 		hci_unregister_dev(hdev);
 	hci_free_dev(hdev);
-- 
2.25.1

[PATCH 4.14 043/191] ath6kl: prevent potential array overflow in ath6kl_add_new_sta()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 54f9ab7b870934b70e5a21786d951fbcf663970f ]

The value for "aid" comes from skb->data so Smatch marks it as
untrusted.  If it's invalid then it can result in an out of bounds array
access in ath6kl_add_new_sta().

Fixes: 572e27c00c9d ("ath6kl: Fix AP mode connect event parsing and TIM updates")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200813141315.GB457408@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index b90c77ef792ef..1c542cf0fd058 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -430,6 +430,9 @@ void ath6kl_connect_ap_mode_sta(struct ath6kl_vif *vif, u16 aid, u8 *mac_addr,
 
 	ath6kl_dbg(ATH6KL_DBG_TRC, "new station %pM aid=%d\n", mac_addr, aid);
 
+	if (aid < 1 || aid > AP_MAX_NUM_STA)
+		return;
+
 	if (assoc_req_len > sizeof(struct ieee80211_hdr_3addr)) {
 		struct ieee80211_mgmt *mgmt =
 			(struct ieee80211_mgmt *) assoc_info;
-- 
2.25.1

[PATCH 4.14 044/191] ath9k: Fix potential out of bounds in ath9k_htc_txcompletion_cb()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 2705cd7558e718a7240c64eb0afb2edad5f8c190 ]

The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks
it as untrusted so we have to check it before using it as an array
offset.

This is similar to a bug that syzkaller found in commit e4ff08a4d727
("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is
probably a real issue.

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200813141253.GA457408@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index f705f0e1cb5be..05fca38b38ed4 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -342,6 +342,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle,
 
 	if (skb) {
 		htc_hdr = (struct htc_frame_hdr *) skb->data;
+		if (htc_hdr->endpoint_id >= ARRAY_SIZE(htc_handle->endpoint))
+			goto ret;
 		endpoint = &htc_handle->endpoint[htc_hdr->endpoint_id];
 		skb_pull(skb, sizeof(struct htc_frame_hdr));
 
-- 
2.25.1

[PATCH 4.14 045/191] wcn36xx: Fix reported 802.11n rx_highest rate wcn3660/wcn3680

[Greg Kroah-Hartman]

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[ Upstream commit 3b9fb6791e7113679b1eb472e6ce1659e80f5797 ]

Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for
the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here.

This patch fixes the data-rate declared in the 5GHz table.

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680
hardware")

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802004824.1307124-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 688152bcfc15c..2450f5f7f79f3 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -162,7 +162,7 @@ static struct ieee80211_supported_band wcn_band_5ghz = {
 		.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
 		.mcs = {
 			.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
-			.rx_highest = cpu_to_le16(72),
+			.rx_highest = cpu_to_le16(150),
 			.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
 		}
 	}
-- 
2.25.1

[PATCH 4.14 046/191] ASoC: qcom: lpass-platform: fix memory leak

[Greg Kroah-Hartman]

From: Rohit kumar <rohitkr@codeaurora.org>

[ Upstream commit 5fd188215d4eb52703600d8986b22311099a5940 ]

lpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.

Fixes: 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-5-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/lpass-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index e1945e1772cda..b8f8cb906d805 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -67,7 +67,7 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream)
 	int ret, dma_ch, dir = substream->stream;
 	struct lpass_pcm_data *data;
 
-	data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL);
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
@@ -127,6 +127,7 @@ static int lpass_platform_pcmops_close(struct snd_pcm_substream *substream)
 	if (v->free_dma_channel)
 		v->free_dma_channel(drvdata, data->dma_ch);
 
+	kfree(data);
 	return 0;
 }
 
-- 
2.25.1

[PATCH 4.14 047/191] ASoC: qcom: lpass-cpu: fix concurrency issue

[Greg Kroah-Hartman]

From: Rohit kumar <rohitkr@codeaurora.org>

[ Upstream commit 753a6e17942f6f425ca622e1610625998312ad89 ]

i2sctl register value is set to 0 during hw_free(). This
impacts any ongoing concurrent session on the same i2s
port. As trigger() stop already resets enable bit to 0,
there is no need of explicit hw_free. Removing it to
fix the issue.

Fixes: 80beab8e1d86 ("ASoC: qcom: Add LPASS CPU DAI driver")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-7-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/lpass-cpu.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 292b103abada9..475579a9830a3 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -182,21 +182,6 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int lpass_cpu_daiops_hw_free(struct snd_pcm_substream *substream,
-		struct snd_soc_dai *dai)
-{
-	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
-	int ret;
-
-	ret = regmap_write(drvdata->lpaif_map,
-			   LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
-			   0);
-	if (ret)
-		dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
-
-	return ret;
-}
-
 static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
@@ -277,7 +262,6 @@ const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = {
 	.startup	= lpass_cpu_daiops_startup,
 	.shutdown	= lpass_cpu_daiops_shutdown,
 	.hw_params	= lpass_cpu_daiops_hw_params,
-	.hw_free	= lpass_cpu_daiops_hw_free,
 	.prepare	= lpass_cpu_daiops_prepare,
 	.trigger	= lpass_cpu_daiops_trigger,
 };
-- 
2.25.1

[PATCH 4.14 048/191] brcmfmac: check ndev pointer

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 9c9f015bc9f8839831c7ba0a6d731a3853c464e2 ]

Clang static analysis reports this error

brcmfmac/core.c:490:4: warning: Dereference of null pointer
        (*ifp)->ndev->stats.rx_errors++;
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In this block of code

	if (ret || !(*ifp) || !(*ifp)->ndev) {
		if (ret != -ENODATA && *ifp)
			(*ifp)->ndev->stats.rx_errors++;
		brcmu_pkt_buf_free_skb(skb);
		return -ENODATA;
	}

(*ifp)->ndev being NULL is caught as an error
But then it is used to report the error.

So add a check before using it.

Fixes: 91b632803ee4 ("brcmfmac: Use net_device_stats from struct net_device")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802161804.6126-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index bfc0e37b7f344..590bef2defb94 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -318,7 +318,7 @@ static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb,
 	ret = brcmf_proto_hdrpull(drvr, true, skb, ifp);
 
 	if (ret || !(*ifp) || !(*ifp)->ndev) {
-		if (ret != -ENODATA && *ifp)
+		if (ret != -ENODATA && *ifp && (*ifp)->ndev)
 			(*ifp)->ndev->stats.rx_errors++;
 		brcmu_pkt_buf_free_skb(skb);
 		return -ENODATA;
-- 
2.25.1

[PATCH 4.14 049/191] mwifiex: Do not use GFP_KERNEL in atomic context

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit d2ab7f00f4321370a8ee14e5630d4349fdacc42e ]

A possible call chain is as follow:
  mwifiex_sdio_interrupt                            (sdio.c)
    --> mwifiex_main_process                        (main.c)
      --> mwifiex_process_cmdresp                   (cmdevt.c)
        --> mwifiex_process_sta_cmdresp             (sta_cmdresp.c)
          --> mwifiex_ret_802_11_scan               (scan.c)
            --> mwifiex_parse_single_response_buf   (scan.c)

'mwifiex_sdio_interrupt()' is an interrupt function.

Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC.

So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in
'mwifiex_parse_single_response_buf()'.

Fixes: 7c6fa2a843c5 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API")
or
Fixes: 601216e12c65e ("mwifiex: process RX packets in SDIO IRQ thread directly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200809092906.744621-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index 0071c40afe81b..a95b1368dad71 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -1890,7 +1890,7 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 					    chan, CFG80211_BSS_FTYPE_UNKNOWN,
 					    bssid, timestamp,
 					    cap_info_bitmap, beacon_period,
-					    ie_buf, ie_len, rssi, GFP_KERNEL);
+					    ie_buf, ie_len, rssi, GFP_ATOMIC);
 			if (bss) {
 				bss_priv = (struct mwifiex_bss_priv *)bss->priv;
 				bss_priv->band = band;
-- 
2.25.1

[PATCH 4.14 050/191] drm/gma500: fix error check

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit cdd296cdae1af2d27dae3fcfbdf12c5252ab78cf ]

Reviewing this block of code in cdv_intel_dp_init()

ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ...

cdv_intel_edp_panel_vdd_off(gma_encoder);
if (ret == 0) {
	/* if this fails, presume the device is a ghost */
	DRM_INFO("failed to retrieve link info, disabling eDP\n");
	drm_encoder_cleanup(encoder);
	cdv_intel_dp_destroy(connector);
	goto err_priv;
} else {

The (ret == 0) is not strict enough.
cdv_intel_dp_aux_native_read() returns > 0 on success
otherwise it is failure.

So change to <=

Fixes: d112a8163f83 ("gma500/cdv: Add eDP support")

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/gma500/cdv_intel_dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
index c52f9adf5e04c..7ec4e3fbafd8c 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -2121,7 +2121,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev
 					       intel_dp->dpcd,
 					       sizeof(intel_dp->dpcd));
 		cdv_intel_edp_panel_vdd_off(gma_encoder);
-		if (ret == 0) {
+		if (ret <= 0) {
 			/* if this fails, presume the device is a ghost */
 			DRM_INFO("failed to retrieve link info, disabling eDP\n");
 			cdv_intel_dp_encoder_destroy(encoder);
-- 
2.25.1

[PATCH 4.14 051/191] scsi: qla4xxx: Fix an error handling path in qla4xxx_get_host_stats()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 574918e69720fe62ab3eb42ec3750230c8d16b06 ]

Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.

Link: https://lore.kernel.org/r/20200802101527.676054-1-christophe.jaillet@wanadoo.fr
Fixes: 4161cee52df8 ("[SCSI] qla4xxx: Add host statistics support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla4xxx/ql4_os.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index fb3abaf817a35..62022a66e9ee2 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1223,7 +1223,7 @@ static int qla4xxx_get_host_stats(struct Scsi_Host *shost, char *buf, int len)
 			le64_to_cpu(ql_iscsi_stats->iscsi_sequence_error);
 exit_host_stats:
 	if (ql_iscsi_stats)
-		dma_free_coherent(&ha->pdev->dev, host_stats_size,
+		dma_free_coherent(&ha->pdev->dev, stats_size,
 				  ql_iscsi_stats, iscsi_stats_dma);
 
 	ql4_printk(KERN_INFO, ha, "%s: Get host stats done\n",
-- 
2.25.1

[PATCH 4.14 052/191] scsi: csiostor: Fix wrong return value in csio_hw_prep_fw()

[Greg Kroah-Hartman]

From: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>

[ Upstream commit 44f4daf8678ae5f08c93bbe70792f90cd88e4649 ]

On an error exit path, a negative error code should be returned instead of
a positive return value.

Link: https://lore.kernel.org/r/20200802111531.5065-1-tianjia.zhang@linux.alibaba.com
Fixes: f40e74ffa3de ("csiostor:firmware upgrade fix")
Cc: Praveen Madhavan <praveenm@chelsio.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/csiostor/csio_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index ab30db8c36c6f..bbcba3d08d495 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -1997,7 +1997,7 @@ static int csio_hw_prep_fw(struct csio_hw *hw, struct fw_info *fw_info,
 			FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
 			FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
 			FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
-		ret = EINVAL;
+		ret = -EINVAL;
 		goto bye;
 	}
 
-- 
2.25.1

[PATCH 4.14 053/191] backlight: sky81452-backlight: Fix refcount imbalance on error

[Greg Kroah-Hartman]

From: dinghao.liu@zju.edu.cn <dinghao.liu@zju.edu.cn>

[ Upstream commit b7a4f80bc316a56d6ec8750e93e66f42431ed960 ]

When of_property_read_u32_array() returns an error code, a
pairing refcount decrement is needed to keep np's refcount
balanced.

Fixes: f705806c9f355 ("backlight: Add support Skyworks SKY81452 backlight driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/backlight/sky81452-backlight.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
index d414c7a3acf5a..a2f77625b7170 100644
--- a/drivers/video/backlight/sky81452-backlight.c
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -207,6 +207,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 					num_entry);
 		if (ret < 0) {
 			dev_err(dev, "led-sources node is invalid.\n");
+			of_node_put(np);
 			return ERR_PTR(-EINVAL);
 		}
 
-- 
2.25.1

[PATCH 4.14 054/191] VMCI: check return value of get_user_pages_fast() for errors

[Greg Kroah-Hartman]

From: Alex Dewar <alex.dewar90@gmail.com>

[ Upstream commit 90ca6333fd65f318c47bff425e1ea36c0a5539f6 ]

In a couple of places in qp_host_get_user_memory(),
get_user_pages_fast() is called without properly checking for errors. If
e.g. -EFAULT is returned, this negative value will then be passed on to
qp_release_pages(), which expects a u64 as input.

Fix this by only calling qp_release_pages() when we have a positive
number returned.

Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Link: https://lore.kernel.org/r/20200825164522.412392-1-alex.dewar90@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/vmw_vmci/vmci_queue_pair.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c
index b4570d5c1fe7d..d6210bf92c1f2 100644
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -758,8 +758,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
 	if (retval < (int)produce_q->kernel_if->num_pages) {
 		pr_debug("get_user_pages_fast(produce) failed (retval=%d)",
 			retval);
-		qp_release_pages(produce_q->kernel_if->u.h.header_page,
-				 retval, false);
+		if (retval > 0)
+			qp_release_pages(produce_q->kernel_if->u.h.header_page,
+					retval, false);
 		err = VMCI_ERROR_NO_MEM;
 		goto out;
 	}
@@ -770,8 +771,9 @@ static int qp_host_get_user_memory(u64 produce_uva,
 	if (retval < (int)consume_q->kernel_if->num_pages) {
 		pr_debug("get_user_pages_fast(consume) failed (retval=%d)",
 			retval);
-		qp_release_pages(consume_q->kernel_if->u.h.header_page,
-				 retval, false);
+		if (retval > 0)
+			qp_release_pages(consume_q->kernel_if->u.h.header_page,
+					retval, false);
 		qp_release_pages(produce_q->kernel_if->u.h.header_page,
 				 produce_q->kernel_if->num_pages, false);
 		err = VMCI_ERROR_NO_MEM;
-- 
2.25.1

[PATCH 4.14 055/191] tty: serial: earlycon dependency

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 0fb9342d06b0f667b915ba58bfefc030e534a218 ]

parse_options() in drivers/tty/serial/earlycon.c calls uart_parse_earlycon
in drivers/tty/serial/serial_core.c therefore selecting SERIAL_EARLYCON
should automatically select SERIAL_CORE, otherwise will result in symbol
not found error during linking if SERIAL_CORE is not configured as builtin

Fixes: 9aac5887595b ("tty/serial: add generic serial earlycon")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20200828123949.2642-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b788fee54249d..3628d37773034 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -9,6 +9,7 @@ menu "Serial drivers"
 
 config SERIAL_EARLYCON
 	bool
+	depends on SERIAL_CORE
 	help
 	  Support for early consoles with the earlycon parameter. This enables
 	  the console before standard serial driver is probed. The console is
-- 
2.25.1

[PATCH 4.14 056/191] tty: hvcs: Dont NULL tty->driver_data until hvcs_cleanup()

[Greg Kroah-Hartman]

From: Tyrel Datwyler <tyreld@linux.ibm.com>

[ Upstream commit 63ffcbdad738e3d1c857027789a2273df3337624 ]

The code currently NULLs tty->driver_data in hvcs_close() with the
intent of informing the next call to hvcs_open() that device needs to be
reconfigured. However, when hvcs_cleanup() is called we copy hvcsd from
tty->driver_data which was previoulsy NULLed by hvcs_close() and our
call to tty_port_put(&hvcsd->port) doesn't actually do anything since
&hvcsd->port ends up translating to NULL by chance. This has the side
effect that when hvcs_remove() is called we have one too many port
references preventing hvcs_destuct_port() from ever being called. This
also prevents us from reusing the /dev/hvcsX node in a future
hvcs_probe() and we can eventually run out of /dev/hvcsX devices.

Fix this by waiting to NULL tty->driver_data in hvcs_cleanup().

Fixes: 27bf7c43a19c ("TTY: hvcs, add tty install")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20200820234643.70412-1-tyreld@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/hvc/hvcs.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 63c29fe9d21f1..f77d7f39c113c 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1231,13 +1231,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 
 		tty_wait_until_sent(tty, HVCS_CLOSE_WAIT);
 
-		/*
-		 * This line is important because it tells hvcs_open that this
-		 * device needs to be re-configured the next time hvcs_open is
-		 * called.
-		 */
-		tty->driver_data = NULL;
-
 		free_irq(irq, hvcsd);
 		return;
 	} else if (hvcsd->port.count < 0) {
@@ -1252,6 +1245,13 @@ static void hvcs_cleanup(struct tty_struct * tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 
+	/*
+	 * This line is important because it tells hvcs_open that this
+	 * device needs to be re-configured the next time hvcs_open is
+	 * called.
+	 */
+	tty->driver_data = NULL;
+
 	tty_port_put(&hvcsd->port);
 }
 
-- 
2.25.1

[PATCH 4.14 057/191] pty: do tty_flip_buffer_push without port->lock in pty_write

[Greg Kroah-Hartman]

From: Artem Savkov <asavkov@redhat.com>

[ Upstream commit 71a174b39f10b4b93223d374722aa894b5d8a82e ]

b6da31b2c07c "tty: Fix data race in tty_insert_flip_string_fixed_flag"
puts tty_flip_buffer_push under port->lock introducing the following
possible circular locking dependency:

[30129.876566] ======================================================
[30129.876566] WARNING: possible circular locking dependency detected
[30129.876567] 5.9.0-rc2+ #3 Tainted: G S      W
[30129.876568] ------------------------------------------------------
[30129.876568] sysrq.sh/1222 is trying to acquire lock:
[30129.876569] ffffffff92c39480 (console_owner){....}-{0:0}, at: console_unlock+0x3fe/0xa90

[30129.876572] but task is already holding lock:
[30129.876572] ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca

[30129.876576] which lock already depends on the new lock.

[30129.876577] the existing dependency chain (in reverse order) is:

[30129.876578] -> #3 (&pool->lock/1){-.-.}-{2:2}:
[30129.876581]        _raw_spin_lock+0x30/0x70
[30129.876581]        __queue_work+0x1a3/0x10f0
[30129.876582]        queue_work_on+0x78/0x80
[30129.876582]        pty_write+0x165/0x1e0
[30129.876583]        n_tty_write+0x47f/0xf00
[30129.876583]        tty_write+0x3d6/0x8d0
[30129.876584]        vfs_write+0x1a8/0x650

[30129.876588] -> #2 (&port->lock#2){-.-.}-{2:2}:
[30129.876590]        _raw_spin_lock_irqsave+0x3b/0x80
[30129.876591]        tty_port_tty_get+0x1d/0xb0
[30129.876592]        tty_port_default_wakeup+0xb/0x30
[30129.876592]        serial8250_tx_chars+0x3d6/0x970
[30129.876593]        serial8250_handle_irq.part.12+0x216/0x380
[30129.876593]        serial8250_default_handle_irq+0x82/0xe0
[30129.876594]        serial8250_interrupt+0xdd/0x1b0
[30129.876595]        __handle_irq_event_percpu+0xfc/0x850

[30129.876602] -> #1 (&port->lock){-.-.}-{2:2}:
[30129.876605]        _raw_spin_lock_irqsave+0x3b/0x80
[30129.876605]        serial8250_console_write+0x12d/0x900
[30129.876606]        console_unlock+0x679/0xa90
[30129.876606]        register_console+0x371/0x6e0
[30129.876607]        univ8250_console_init+0x24/0x27
[30129.876607]        console_init+0x2f9/0x45e

[30129.876609] -> #0 (console_owner){....}-{0:0}:
[30129.876611]        __lock_acquire+0x2f70/0x4e90
[30129.876612]        lock_acquire+0x1ac/0xad0
[30129.876612]        console_unlock+0x460/0xa90
[30129.876613]        vprintk_emit+0x130/0x420
[30129.876613]        printk+0x9f/0xc5
[30129.876614]        show_pwq+0x154/0x618
[30129.876615]        show_workqueue_state.cold.55+0x193/0x6ca
[30129.876615]        __handle_sysrq+0x244/0x460
[30129.876616]        write_sysrq_trigger+0x48/0x4a
[30129.876616]        proc_reg_write+0x1a6/0x240
[30129.876617]        vfs_write+0x1a8/0x650

[30129.876619] other info that might help us debug this:

[30129.876620] Chain exists of:
[30129.876621]   console_owner --> &port->lock#2 --> &pool->lock/1

[30129.876625]  Possible unsafe locking scenario:

[30129.876626]        CPU0                    CPU1
[30129.876626]        ----                    ----
[30129.876627]   lock(&pool->lock/1);
[30129.876628]                                lock(&port->lock#2);
[30129.876630]                                lock(&pool->lock/1);
[30129.876631]   lock(console_owner);

[30129.876633]  *** DEADLOCK ***

[30129.876634] 5 locks held by sysrq.sh/1222:
[30129.876634]  #0: ffff8881d3ce0470 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x359/0x650
[30129.876637]  #1: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: __handle_sysrq+0x4d/0x460
[30129.876640]  #2: ffffffff92c612c0 (rcu_read_lock){....}-{1:2}, at: show_workqueue_state+0x5/0xf0
[30129.876642]  #3: ffff888107cb9018 (&pool->lock/1){-.-.}-{2:2}, at: show_workqueue_state.cold.55+0x15b/0x6ca
[30129.876645]  #4: ffffffff92c39980 (console_lock){+.+.}-{0:0}, at: vprintk_emit+0x123/0x420

[30129.876648] stack backtrace:
[30129.876649] CPU: 3 PID: 1222 Comm: sysrq.sh Tainted: G S      W         5.9.0-rc2+ #3
[30129.876649] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012
[30129.876650] Call Trace:
[30129.876650]  dump_stack+0x9d/0xe0
[30129.876651]  check_noncircular+0x34f/0x410
[30129.876653]  __lock_acquire+0x2f70/0x4e90
[30129.876656]  lock_acquire+0x1ac/0xad0
[30129.876658]  console_unlock+0x460/0xa90
[30129.876660]  vprintk_emit+0x130/0x420
[30129.876660]  printk+0x9f/0xc5
[30129.876661]  show_pwq+0x154/0x618
[30129.876662]  show_workqueue_state.cold.55+0x193/0x6ca
[30129.876664]  __handle_sysrq+0x244/0x460
[30129.876665]  write_sysrq_trigger+0x48/0x4a
[30129.876665]  proc_reg_write+0x1a6/0x240
[30129.876666]  vfs_write+0x1a8/0x650

It looks like the commit was aimed to protect tty_insert_flip_string and
there is no need for tty_flip_buffer_push to be under this lock.

Fixes: b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20200902120045.3693075-1-asavkov@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/pty.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index b3208b1b1028d..bca47176db4c2 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -120,10 +120,10 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 		spin_lock_irqsave(&to->port->lock, flags);
 		/* Stuff the data into the input queue of the other end */
 		c = tty_insert_flip_string(to->port, buf, c);
+		spin_unlock_irqrestore(&to->port->lock, flags);
 		/* And shovel */
 		if (c)
 			tty_flip_buffer_push(to->port);
-		spin_unlock_irqrestore(&to->port->lock, flags);
 	}
 	return c;
 }
-- 
2.25.1

[PATCH 4.14 058/191] pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare()

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 181f4d2f44463fe09fe4df02e03095cb87151c29 ]

According to the data-sheet the way the PWM controller works is that
each input clock-cycle the base_unit gets added to a N bit counter and
that counter overflowing determines the PWM output frequency.

So assuming e.g. a 16 bit counter this means that if base_unit is set to 1,
after 65535 input clock-cycles the counter has been increased from 0 to
65535 and it will overflow on the next cycle, so it will overflow after
every 65536 clock cycles and thus the calculations done in
pwm_lpss_prepare() should use 65536 and not 65535.

This commit fixes this. Note this also aligns the calculations in
pwm_lpss_prepare() with those in pwm_lpss_get_state().

Note this effectively reverts commit 684309e5043e ("pwm: lpss: Avoid
potential overflow of base_unit"). The next patch in this series really
fixes the potential overflow of the base_unit value.

Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-4-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-lpss.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 7a4a6406cf69a..da63c029aa286 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -105,7 +105,7 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 	 * The equation is:
 	 * base_unit = round(base_unit_range * freq / c)
 	 */
-	base_unit_range = BIT(lpwm->info->base_unit_bits) - 1;
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
 	freq *= base_unit_range;
 
 	base_unit = DIV_ROUND_CLOSEST_ULL(freq, c);
@@ -116,8 +116,8 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 
 	orig_ctrl = ctrl = pwm_lpss_read(pwm);
 	ctrl &= ~PWM_ON_TIME_DIV_MASK;
-	ctrl &= ~(base_unit_range << PWM_BASE_UNIT_SHIFT);
-	base_unit &= base_unit_range;
+	ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
+	base_unit &= (base_unit_range - 1);
 	ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
 	ctrl |= on_time_div;
 
-- 
2.25.1

[PATCH 4.14 059/191] pwm: lpss: Add range limit check for the base_unit register value

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit ef9f60daab309558c8bb3e086a9a11ee40bd6061 ]

When the user requests a high enough period ns value, then the
calculations in pwm_lpss_prepare() might result in a base_unit value of 0.

But according to the data-sheet the way the PWM controller works is that
each input clock-cycle the base_unit gets added to a N bit counter and
that counter overflowing determines the PWM output frequency. Adding 0
to the counter is a no-op. The data-sheet even explicitly states that
writing 0 to the base_unit bits will result in the PWM outputting a
continuous 0 signal.

When the user requestes a low enough period ns value, then the
calculations in pwm_lpss_prepare() might result in a base_unit value
which is bigger then base_unit_range - 1. Currently the codes for this
deals with this by applying a mask:

	base_unit &= (base_unit_range - 1);

But this means that we let the value overflow the range, we throw away the
higher bits and store whatever value is left in the lower bits into the
register leading to a random output frequency, rather then clamping the
output frequency to the highest frequency which the hardware can do.

This commit fixes both issues by clamping the base_unit value to be
between 1 and (base_unit_range - 1).

Fixes: 684309e5043e ("pwm: lpss: Avoid potential overflow of base_unit")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-lpss.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index da63c029aa286..69f8be065919e 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -109,6 +109,8 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 	freq *= base_unit_range;
 
 	base_unit = DIV_ROUND_CLOSEST_ULL(freq, c);
+	/* base_unit must not be 0 and we also want to avoid overflowing it */
+	base_unit = clamp_val(base_unit, 1, base_unit_range - 1);
 
 	on_time_div = 255ULL * duty_ns;
 	do_div(on_time_div, period_ns);
@@ -117,7 +119,6 @@ static void pwm_lpss_prepare(struct pwm_lpss_chip *lpwm, struct pwm_device *pwm,
 	orig_ctrl = ctrl = pwm_lpss_read(pwm);
 	ctrl &= ~PWM_ON_TIME_DIV_MASK;
 	ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
-	base_unit &= (base_unit_range - 1);
 	ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
 	ctrl |= on_time_div;
 
-- 
2.25.1

[PATCH 4.14 060/191] drivers/virt/fsl_hypervisor: Fix error handling path

[Greg Kroah-Hartman]

From: Souptick Joarder <jrdr.linux@gmail.com>

[ Upstream commit 7f360bec37857bfd5a48cef21d86f58a09a3df63 ]

First, when memory allocation for sg_list_unaligned failed, there
is a bug of calling put_pages() as we haven't pinned any pages.

Second, if get_user_pages_fast() failed we should unpin num_pinned
pages.

This will address both.

As part of these changes, minor update in documentation.

Fixes: 6db7199407ca ("drivers/virt: introduce Freescale hypervisor management driver")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/1598995271-6755-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virt/fsl_hypervisor.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/virt/fsl_hypervisor.c b/drivers/virt/fsl_hypervisor.c
index 2e1678d22f6ff..1799bfb382e50 100644
--- a/drivers/virt/fsl_hypervisor.c
+++ b/drivers/virt/fsl_hypervisor.c
@@ -157,7 +157,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 
 	unsigned int i;
 	long ret = 0;
-	int num_pinned; /* return value from get_user_pages() */
+	int num_pinned = 0; /* return value from get_user_pages_fast() */
 	phys_addr_t remote_paddr; /* The next address in the remote buffer */
 	uint32_t count; /* The number of bytes left to copy */
 
@@ -174,7 +174,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		return -EINVAL;
 
 	/*
-	 * The array of pages returned by get_user_pages() covers only
+	 * The array of pages returned by get_user_pages_fast() covers only
 	 * page-aligned memory.  Since the user buffer is probably not
 	 * page-aligned, we need to handle the discrepancy.
 	 *
@@ -224,7 +224,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 
 	/*
 	 * 'pages' is an array of struct page pointers that's initialized by
-	 * get_user_pages().
+	 * get_user_pages_fast().
 	 */
 	pages = kzalloc(num_pages * sizeof(struct page *), GFP_KERNEL);
 	if (!pages) {
@@ -241,7 +241,7 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 	if (!sg_list_unaligned) {
 		pr_debug("fsl-hv: could not allocate S/G list\n");
 		ret = -ENOMEM;
-		goto exit;
+		goto free_pages;
 	}
 	sg_list = PTR_ALIGN(sg_list_unaligned, sizeof(struct fh_sg_list));
 
@@ -250,7 +250,6 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		num_pages, pages, (param.source == -1) ? 0 : FOLL_WRITE);
 
 	if (num_pinned != num_pages) {
-		/* get_user_pages() failed */
 		pr_debug("fsl-hv: could not lock source buffer\n");
 		ret = (num_pinned < 0) ? num_pinned : -EFAULT;
 		goto exit;
@@ -292,13 +291,13 @@ static long ioctl_memcpy(struct fsl_hv_ioctl_memcpy __user *p)
 		virt_to_phys(sg_list), num_pages);
 
 exit:
-	if (pages) {
-		for (i = 0; i < num_pages; i++)
-			if (pages[i])
-				put_page(pages[i]);
+	if (pages && (num_pinned > 0)) {
+		for (i = 0; i < num_pinned; i++)
+			put_page(pages[i]);
 	}
 
 	kfree(sg_list_unaligned);
+free_pages:
 	kfree(pages);
 
 	if (!ret)
-- 
2.25.1

[PATCH 4.14 061/191] video: fbdev: vga16fb: fix setting of pixclock because a pass-by-value error

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit c72fab81ceaa54408b827a2f0486d9a0f4be34cf ]

The pixclock is being set locally because it is being passed as a
pass-by-value argument rather than pass-by-reference, so the computed
pixclock is never being set in var->pixclock. Fix this by passing
by reference.

[This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git ]

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
[b.zolnierkie: minor patch summary fixup]
[b.zolnierkie: removed "Fixes:" tag (not in upstream tree)]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723170227.996229-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/vga16fb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/video/fbdev/vga16fb.c b/drivers/video/fbdev/vga16fb.c
index ee6957a799bb6..aea8fd85cbf70 100644
--- a/drivers/video/fbdev/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
@@ -243,7 +243,7 @@ static void vga16fb_update_fix(struct fb_info *info)
 }
 
 static void vga16fb_clock_chip(struct vga16fb_par *par,
-			       unsigned int pixclock,
+			       unsigned int *pixclock,
 			       const struct fb_info *info,
 			       int mul, int div)
 {
@@ -259,14 +259,14 @@ static void vga16fb_clock_chip(struct vga16fb_par *par,
 		{     0 /* bad */,    0x00, 0x00}};
 	int err;
 
-	pixclock = (pixclock * mul) / div;
+	*pixclock = (*pixclock * mul) / div;
 	best = vgaclocks;
-	err = pixclock - best->pixclock;
+	err = *pixclock - best->pixclock;
 	if (err < 0) err = -err;
 	for (ptr = vgaclocks + 1; ptr->pixclock; ptr++) {
 		int tmp;
 
-		tmp = pixclock - ptr->pixclock;
+		tmp = *pixclock - ptr->pixclock;
 		if (tmp < 0) tmp = -tmp;
 		if (tmp < err) {
 			err = tmp;
@@ -275,7 +275,7 @@ static void vga16fb_clock_chip(struct vga16fb_par *par,
 	}
 	par->misc |= best->misc;
 	par->clkdiv = best->seq_clock_mode;
-	pixclock = (best->pixclock * div) / mul;		
+	*pixclock = (best->pixclock * div) / mul;
 }
 			       
 #define FAIL(X) return -EINVAL
@@ -497,10 +497,10 @@ static int vga16fb_check_var(struct fb_var_screeninfo *var,
 
 	if (mode & MODE_8BPP)
 		/* pixel clock == vga clock / 2 */
-		vga16fb_clock_chip(par, var->pixclock, info, 1, 2);
+		vga16fb_clock_chip(par, &var->pixclock, info, 1, 2);
 	else
 		/* pixel clock == vga clock */
-		vga16fb_clock_chip(par, var->pixclock, info, 1, 1);
+		vga16fb_clock_chip(par, &var->pixclock, info, 1, 1);
 	
 	var->red.offset = var->green.offset = var->blue.offset = 
 	var->transp.offset = 0;
-- 
2.25.1

[PATCH 4.14 062/191] video: fbdev: sis: fix null ptr dereference

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit ad6f93e9cd56f0b10e9b22e3e137d17a1a035242 ]

Clang static analysis reports this representative error

init.c:2501:18: warning: Array access (from variable 'queuedata') results
  in a null pointer dereference
      templ |= ((queuedata[i] & 0xc0) << 3);

This is the problem block of code

   if(ModeNo > 0x13) {
      ...
      if(SiS_Pr->ChipType == SIS_730) {
	 queuedata = &FQBQData730[0];
      } else {
	 queuedata = &FQBQData[0];
      }
   } else {

   }

queuedata is not set in the else block

Reviewing the old code, the arrays FQBQData730 and FQBQData were
used directly.

So hoist the setting of queuedata out of the if-else block.

Fixes: 544393fe584d ("[PATCH] sisfb update")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805145208.17727-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/sis/init.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/sis/init.c b/drivers/video/fbdev/sis/init.c
index dfe3eb769638b..fde27feae5d0c 100644
--- a/drivers/video/fbdev/sis/init.c
+++ b/drivers/video/fbdev/sis/init.c
@@ -2428,6 +2428,11 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    i = 0;
 
+	if (SiS_Pr->ChipType == SIS_730)
+		queuedata = &FQBQData730[0];
+	else
+		queuedata = &FQBQData[0];
+
    if(ModeNo > 0x13) {
 
       /* Get VCLK  */
@@ -2445,12 +2450,6 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       /* Get half colordepth */
       colorth = colortharray[(SiS_Pr->SiS_ModeType - ModeEGA)];
 
-      if(SiS_Pr->ChipType == SIS_730) {
-	 queuedata = &FQBQData730[0];
-      } else {
-	 queuedata = &FQBQData[0];
-      }
-
       do {
 	 templ = SiS_CalcDelay2(SiS_Pr, queuedata[i]) * VCLK * colorth;
 
-- 
2.25.1

[PATCH 4.14 063/191] HID: roccat: add bounds checking in kone_sysfs_write_settings()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d4f98dbfe717490e771b6e701904bfcf4b4557f0 ]

This code doesn't check if "settings->startup_profile" is within bounds
and that could result in an out of bounds array access.  What the code
does do is it checks if the settings can be written to the firmware, so
it's possible that the firmware has a bounds check?  It's safer and
easier to verify when the bounds checking is done in the kernel.

Fixes: 14bf62cde794 ("HID: add driver for Roccat Kone gaming mouse")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-roccat-kone.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c
index bf4675a273965..9be8c31f613fd 100644
--- a/drivers/hid/hid-roccat-kone.c
+++ b/drivers/hid/hid-roccat-kone.c
@@ -297,31 +297,40 @@ static ssize_t kone_sysfs_write_settings(struct file *fp, struct kobject *kobj,
 	struct kone_device *kone = hid_get_drvdata(dev_get_drvdata(dev));
 	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
 	int retval = 0, difference, old_profile;
+	struct kone_settings *settings = (struct kone_settings *)buf;
 
 	/* I need to get my data in one piece */
 	if (off != 0 || count != sizeof(struct kone_settings))
 		return -EINVAL;
 
 	mutex_lock(&kone->kone_lock);
-	difference = memcmp(buf, &kone->settings, sizeof(struct kone_settings));
+	difference = memcmp(settings, &kone->settings,
+			    sizeof(struct kone_settings));
 	if (difference) {
-		retval = kone_set_settings(usb_dev,
-				(struct kone_settings const *)buf);
-		if (retval) {
-			mutex_unlock(&kone->kone_lock);
-			return retval;
+		if (settings->startup_profile < 1 ||
+		    settings->startup_profile > 5) {
+			retval = -EINVAL;
+			goto unlock;
 		}
 
+		retval = kone_set_settings(usb_dev, settings);
+		if (retval)
+			goto unlock;
+
 		old_profile = kone->settings.startup_profile;
-		memcpy(&kone->settings, buf, sizeof(struct kone_settings));
+		memcpy(&kone->settings, settings, sizeof(struct kone_settings));
 
 		kone_profile_activated(kone, kone->settings.startup_profile);
 
 		if (kone->settings.startup_profile != old_profile)
 			kone_profile_report(kone, kone->settings.startup_profile);
 	}
+unlock:
 	mutex_unlock(&kone->kone_lock);
 
+	if (retval)
+		return retval;
+
 	return sizeof(struct kone_settings);
 }
 static BIN_ATTR(settings, 0660, kone_sysfs_read_settings,
-- 
2.25.1

[PATCH 4.14 064/191] pinctrl: mcp23s08: Fix mcp23x17_regmap initialiser

[Greg Kroah-Hartman]

From: Thomas Preston <thomas.preston@codethink.co.uk>

[ Upstream commit b445f6237744df5e8d4f56f8733b2108c611220a ]

The mcp23x17_regmap is initialised with structs named "mcp23x16".
However, the mcp23s08 driver doesn't support the MCP23016 device yet, so
this appears to be a typo.

Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200828213226.1734264-2-thomas.preston@codethink.co.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-mcp23s08.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 22558bf294246..12e7f7c54ffaa 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -119,7 +119,7 @@ static const struct regmap_config mcp23x08_regmap = {
 	.max_register = MCP_OLAT,
 };
 
-static const struct reg_default mcp23x16_defaults[] = {
+static const struct reg_default mcp23x17_defaults[] = {
 	{.reg = MCP_IODIR << 1,		.def = 0xffff},
 	{.reg = MCP_IPOL << 1,		.def = 0x0000},
 	{.reg = MCP_GPINTEN << 1,	.def = 0x0000},
@@ -130,23 +130,23 @@ static const struct reg_default mcp23x16_defaults[] = {
 	{.reg = MCP_OLAT << 1,		.def = 0x0000},
 };
 
-static const struct regmap_range mcp23x16_volatile_range = {
+static const struct regmap_range mcp23x17_volatile_range = {
 	.range_min = MCP_INTF << 1,
 	.range_max = MCP_GPIO << 1,
 };
 
-static const struct regmap_access_table mcp23x16_volatile_table = {
-	.yes_ranges = &mcp23x16_volatile_range,
+static const struct regmap_access_table mcp23x17_volatile_table = {
+	.yes_ranges = &mcp23x17_volatile_range,
 	.n_yes_ranges = 1,
 };
 
-static const struct regmap_range mcp23x16_precious_range = {
+static const struct regmap_range mcp23x17_precious_range = {
 	.range_min = MCP_GPIO << 1,
 	.range_max = MCP_GPIO << 1,
 };
 
-static const struct regmap_access_table mcp23x16_precious_table = {
-	.yes_ranges = &mcp23x16_precious_range,
+static const struct regmap_access_table mcp23x17_precious_table = {
+	.yes_ranges = &mcp23x17_precious_range,
 	.n_yes_ranges = 1,
 };
 
@@ -156,10 +156,10 @@ static const struct regmap_config mcp23x17_regmap = {
 
 	.reg_stride = 2,
 	.max_register = MCP_OLAT << 1,
-	.volatile_table = &mcp23x16_volatile_table,
-	.precious_table = &mcp23x16_precious_table,
-	.reg_defaults = mcp23x16_defaults,
-	.num_reg_defaults = ARRAY_SIZE(mcp23x16_defaults),
+	.volatile_table = &mcp23x17_volatile_table,
+	.precious_table = &mcp23x17_precious_table,
+	.reg_defaults = mcp23x17_defaults,
+	.num_reg_defaults = ARRAY_SIZE(mcp23x17_defaults),
 	.cache_type = REGCACHE_FLAT,
 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
-- 
2.25.1

[PATCH 4.14 065/191] pinctrl: mcp23s08: Fix mcp23x17 precious range

[Greg Kroah-Hartman]

From: Thomas Preston <thomas.preston@codethink.co.uk>

[ Upstream commit b9b7fb29433b906635231d0a111224efa009198c ]

On page 23 of the datasheet [0] it says "The register remains unchanged
until the interrupt is cleared via a read of INTCAP or GPIO." Include
INTCAPA and INTCAPB registers in precious range, so that they aren't
accidentally cleared when we read via debugfs.

[0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf

Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200828213226.1734264-3-thomas.preston@codethink.co.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-mcp23s08.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c
index 12e7f7c54ffaa..5971338c87572 100644
--- a/drivers/pinctrl/pinctrl-mcp23s08.c
+++ b/drivers/pinctrl/pinctrl-mcp23s08.c
@@ -141,7 +141,7 @@ static const struct regmap_access_table mcp23x17_volatile_table = {
 };
 
 static const struct regmap_range mcp23x17_precious_range = {
-	.range_min = MCP_GPIO << 1,
+	.range_min = MCP_INTCAP << 1,
 	.range_max = MCP_GPIO << 1,
 };
 
-- 
2.25.1

[PATCH 4.14 066/191] ath6kl: wmi: prevent a shift wrapping bug in ath6kl_wmi_delete_pstream_cmd()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 6a950755cec1a90ddaaff3e4acb5333617441c32 ]

The "tsid" is a user controlled u8 which comes from debugfs.  Values
more than 15 are invalid because "active_tsids" is a 16 bit variable.
If the value of "tsid" is more than 31 then that leads to a shift
wrapping bug.

Fixes: 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918142732.GA909725@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/wmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index d79c2bccf5822..f80f1757b58fc 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2648,6 +2648,11 @@ int ath6kl_wmi_delete_pstream_cmd(struct wmi *wmi, u8 if_idx, u8 traffic_class,
 		return -EINVAL;
 	}
 
+	if (tsid >= 16) {
+		ath6kl_err("invalid tsid: %d\n", tsid);
+		return -EINVAL;
+	}
+
 	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
 	if (!skb)
 		return -ENOMEM;
-- 
2.25.1

[PATCH 4.14 067/191] misc: mic: scif: Fix error handling path

[Greg Kroah-Hartman]

From: Souptick Joarder <jrdr.linux@gmail.com>

[ Upstream commit a81072a9c0ae734b7889929b0bc070fe3f353f0e ]

Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.

The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.

Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.

Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/mic/scif/scif_rma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/mic/scif/scif_rma.c b/drivers/misc/mic/scif/scif_rma.c
index 95745dc4e0ecf..f282c2eaab29b 100644
--- a/drivers/misc/mic/scif/scif_rma.c
+++ b/drivers/misc/mic/scif/scif_rma.c
@@ -1404,6 +1404,8 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 				NULL);
 		up_write(&mm->mmap_sem);
 		if (nr_pages != pinned_pages->nr_pages) {
+			if (pinned_pages->nr_pages < 0)
+				pinned_pages->nr_pages = 0;
 			if (try_upgrade) {
 				if (ulimit)
 					__scif_dec_pinned_vm_lock(mm,
@@ -1424,7 +1426,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 
 	if (pinned_pages->nr_pages < nr_pages) {
 		err = -EFAULT;
-		pinned_pages->nr_pages = nr_pages;
 		goto dec_pinned;
 	}
 
@@ -1437,7 +1438,6 @@ int __scif_pin_pages(void *addr, size_t len, int *out_prot,
 		__scif_dec_pinned_vm_lock(mm, nr_pages, 0);
 	/* Something went wrong! Rollback */
 error_unmap:
-	pinned_pages->nr_pages = nr_pages;
 	scif_destroy_pinned_pages(pinned_pages);
 	*pages = NULL;
 	dev_dbg(scif_info.mdev.this_device,
-- 
2.25.1

[PATCH 4.14 068/191] ALSA: seq: oss: Avoid mutex lock for a long-time ioctl

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 2759caad2600d503c3b0ed800e7e03d2cd7a4c05 ]

Recently we applied a fix to cover the whole OSS sequencer ioctls with
the mutex for dealing with the possible races.  This works fine in
general, but in theory, this may lead to unexpectedly long stall if an
ioctl like SNDCTL_SEQ_SYNC is issued and an event with the far future
timestamp was queued.

For fixing such a potential stall, this patch changes the mutex lock
applied conditionally excluding such an ioctl command.  Also, change
the mutex_lock() with the interruptible version for user to allow
escaping from the big-hammer mutex.

Fixes: 80982c7e834e ("ALSA: seq: oss: Serialize ioctls")
Suggested-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20200922083856.28572-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/oss/seq_oss.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/core/seq/oss/seq_oss.c b/sound/core/seq/oss/seq_oss.c
index 4b78979599131..ade880fe24a41 100644
--- a/sound/core/seq/oss/seq_oss.c
+++ b/sound/core/seq/oss/seq_oss.c
@@ -187,9 +187,12 @@ odev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (snd_BUG_ON(!dp))
 		return -ENXIO;
 
-	mutex_lock(&register_mutex);
+	if (cmd != SNDCTL_SEQ_SYNC &&
+	    mutex_lock_interruptible(&register_mutex))
+		return -ERESTARTSYS;
 	rc = snd_seq_oss_ioctl(dp, cmd, arg);
-	mutex_unlock(&register_mutex);
+	if (cmd != SNDCTL_SEQ_SYNC)
+		mutex_unlock(&register_mutex);
 	return rc;
 }
 
-- 
2.25.1

[PATCH 4.14 069/191] usb: dwc2: Fix parameter type in function pointer prototype

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 362b9398c962c9ec563653444e15ef9032ef3a90 ]

When booting up on a Raspberry Pi 4 with Control Flow Integrity checking
enabled, the following warning/panic happens:

[    1.626435] CFI failure (target: dwc2_set_bcm_params+0x0/0x4):
[    1.632408] WARNING: CPU: 0 PID: 32 at kernel/cfi.c:30 __cfi_check_fail+0x54/0x5c
[    1.640021] Modules linked in:
[    1.643137] CPU: 0 PID: 32 Comm: kworker/0:1 Not tainted 5.8.0-rc6-next-20200724-00051-g89ba619726de #1
[    1.652693] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT)
[    1.658637] Workqueue: events deferred_probe_work_func
[    1.663870] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[    1.669542] pc : __cfi_check_fail+0x54/0x5c
[    1.673798] lr : __cfi_check_fail+0x54/0x5c
[    1.678050] sp : ffff8000102bbaa0
[    1.681419] x29: ffff8000102bbaa0 x28: ffffab09e21c7000
[    1.686829] x27: 0000000000000402 x26: ffff0000f6e7c228
[    1.692238] x25: 00000000fb7cdb0d x24: 0000000000000005
[    1.697647] x23: ffffab09e2515000 x22: ffffab09e069a000
[    1.703055] x21: 4c550309df1cf4c1 x20: ffffab09e2433c60
[    1.708462] x19: ffffab09e160dc50 x18: ffff0000f6e8cc78
[    1.713870] x17: 0000000000000041 x16: ffffab09e0bce6f8
[    1.719278] x15: ffffab09e1c819b7 x14: 0000000000000003
[    1.724686] x13: 00000000ffffefff x12: 0000000000000000
[    1.730094] x11: 0000000000000000 x10: 00000000ffffffff
[    1.735501] x9 : c932f7abfc4bc600 x8 : c932f7abfc4bc600
[    1.740910] x7 : 077207610770075f x6 : ffff0000f6c38f00
[    1.746317] x5 : 0000000000000000 x4 : 0000000000000000
[    1.751723] x3 : 0000000000000000 x2 : 0000000000000000
[    1.757129] x1 : ffff8000102bb7d8 x0 : 0000000000000032
[    1.762539] Call trace:
[    1.765030]  __cfi_check_fail+0x54/0x5c
[    1.768938]  __cfi_check+0x5fa6c/0x66afc
[    1.772932]  dwc2_init_params+0xd74/0xd78
[    1.777012]  dwc2_driver_probe+0x484/0x6ec
[    1.781180]  platform_drv_probe+0xb4/0x100
[    1.785350]  really_probe+0x228/0x63c
[    1.789076]  driver_probe_device+0x80/0xc0
[    1.793247]  __device_attach_driver+0x114/0x160
[    1.797857]  bus_for_each_drv+0xa8/0x128
[    1.801851]  __device_attach.llvm.14901095709067289134+0xc0/0x170
[    1.808050]  bus_probe_device+0x44/0x100
[    1.812044]  deferred_probe_work_func+0x78/0xb8
[    1.816656]  process_one_work+0x204/0x3c4
[    1.820736]  worker_thread+0x2f0/0x4c4
[    1.824552]  kthread+0x174/0x184
[    1.827837]  ret_from_fork+0x10/0x18

CFI validates that all indirect calls go to a function with the same
exact function pointer prototype. In this case, dwc2_set_bcm_params
is the target, which has a parameter of type 'struct dwc2_hsotg *',
but it is being implicitly cast to have a parameter of type 'void *'
because that is the set_params function pointer prototype. Make the
function pointer protoype match the definitions so that there is no
more violation.

Fixes: 7de1debcd2de ("usb: dwc2: Remove platform static params")
Link: https://github.com/ClangBuiltLinux/linux/issues/1107
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/params.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index a3ffe97170ffd..cf6ff8bfd7f61 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -711,7 +711,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 int dwc2_init_params(struct dwc2_hsotg *hsotg)
 {
 	const struct of_device_id *match;
-	void (*set_params)(void *data);
+	void (*set_params)(struct dwc2_hsotg *data);
 
 	dwc2_set_default_params(hsotg);
 	dwc2_get_device_properties(hsotg);
-- 
2.25.1

[PATCH 4.14 070/191] quota: clear padding in v2r1_mem2diskdqb()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3d3dc274ce736227e3197868ff749cff2f175f63 ]

Freshly allocated memory contains garbage, better make sure
to init all struct v2r1_disk_dqblk fields to avoid KMSAN report:

BUG: KMSAN: uninit-value in qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
CPU: 0 PID: 23373 Comm: syz-executor.1 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219
 qtree_entry_unused+0x137/0x1b0 fs/quota/quota_tree.c:218
 v2r1_mem2diskdqb+0x43d/0x710 fs/quota/quota_v2.c:285
 qtree_write_dquot+0x226/0x870 fs/quota/quota_tree.c:394
 v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
 dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
 ext4_write_dquot fs/ext4/super.c:5934 [inline]
 ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
 mark_dquot_dirty fs/quota/dquot.c:347 [inline]
 mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
 dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
 __ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
 ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
 vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
 do_tmpfile fs/namei.c:3316 [inline]
 path_openat+0x4035/0x6a90 fs/namei.c:3359
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
RIP: 0023:0xf7ff4549
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000f55cd0cc EFLAGS: 00000296 ORIG_RAX: 0000000000000127
RAX: ffffffffffffffda RBX: 00000000ffffff9c RCX: 0000000020000000
RDX: 0000000000410481 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:143 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:126
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:80
 slab_alloc_node mm/slub.c:2907 [inline]
 slab_alloc mm/slub.c:2916 [inline]
 __kmalloc+0x2bb/0x4b0 mm/slub.c:3982
 kmalloc include/linux/slab.h:559 [inline]
 getdqbuf+0x56/0x150 fs/quota/quota_tree.c:52
 qtree_write_dquot+0xf2/0x870 fs/quota/quota_tree.c:378
 v2_write_dquot+0x1ad/0x280 fs/quota/quota_v2.c:333
 dquot_commit+0x4af/0x600 fs/quota/dquot.c:482
 ext4_write_dquot fs/ext4/super.c:5934 [inline]
 ext4_mark_dquot_dirty+0x4d8/0x6a0 fs/ext4/super.c:5985
 mark_dquot_dirty fs/quota/dquot.c:347 [inline]
 mark_all_dquot_dirty fs/quota/dquot.c:385 [inline]
 dquot_alloc_inode+0xc05/0x12b0 fs/quota/dquot.c:1755
 __ext4_new_inode+0x8204/0x9d70 fs/ext4/ialloc.c:1155
 ext4_tmpfile+0x41a/0x850 fs/ext4/namei.c:2686
 vfs_tmpfile+0x2a2/0x570 fs/namei.c:3283
 do_tmpfile fs/namei.c:3316 [inline]
 path_openat+0x4035/0x6a90 fs/namei.c:3359
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Fixes: 498c60153ebb ("quota: Implement quota format with 64-bit space and inode limits")
Link: https://lore.kernel.org/r/20200924183619.4176790-1-edumazet@google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/quota_v2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c
index a73e5b34db418..5d4dc0f84f202 100644
--- a/fs/quota/quota_v2.c
+++ b/fs/quota/quota_v2.c
@@ -283,6 +283,7 @@ static void v2r1_mem2diskdqb(void *dp, struct dquot *dquot)
 	d->dqb_curspace = cpu_to_le64(m->dqb_curspace);
 	d->dqb_btime = cpu_to_le64(m->dqb_btime);
 	d->dqb_id = cpu_to_le32(from_kqid(&init_user_ns, dquot->dq_id));
+	d->dqb_pad = 0;
 	if (qtree_entry_unused(info, dp))
 		d->dqb_itime = cpu_to_le64(1);
 }
-- 
2.25.1

[PATCH 4.14 071/191] HID: hid-input: fix stylus battery reporting

[Greg Kroah-Hartman]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 505f394fa239cecb76d916aa858f87ed7ea7fde4 ]

With commit 4f3882177240 hid-input started clearing of "ignored" usages
to avoid using garbage that might have been left in them. However
"battery strength" usages should not be ignored, as we do want to
use them.

Fixes: 4f3882177240 ("HID: hid-input: clear unmapped usages")
Reported-by: Kenneth Albanowski <kenalba@google.com>
Tested-by: Kenneth Albanowski <kenalba@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-input.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 3624d6e3384ff..07a043ae69f12 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -796,7 +796,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x3b: /* Battery Strength */
 			hidinput_setup_battery(device, HID_INPUT_REPORT, field);
 			usage->type = EV_PWR;
-			goto ignore;
+			return;
 
 		case 0x3c: /* Invert */
 			map_key_clear(BTN_TOOL_RUBBER);
@@ -1043,7 +1043,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case HID_DC_BATTERYSTRENGTH:
 			hidinput_setup_battery(device, HID_INPUT_REPORT, field);
 			usage->type = EV_PWR;
-			goto ignore;
+			return;
 		}
 		goto unknown;
 
-- 
2.25.1

[PATCH 4.14 072/191] qtnfmac: fix resource leaks on unsupported iftype error return path

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 63f6982075d890d7563e2469643f05a37d193f01 ]

Currently if an unsupported iftype is detected the error return path
does not free the cmd_skb leading to a resource leak. Fix this by
free'ing cmd_skb.

Addresses-Coverity: ("Resource leak")
Fixes: 805b28c05c8e ("qtnfmac: prepare for AP_VLAN interface type support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200925132224.21638-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/quantenna/qtnfmac/commands.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/quantenna/qtnfmac/commands.c b/drivers/net/wireless/quantenna/qtnfmac/commands.c
index ed087bbc6f631..f37fda2238acc 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/commands.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/commands.c
@@ -796,6 +796,7 @@ int qtnf_cmd_send_del_intf(struct qtnf_vif *vif)
 	default:
 		pr_warn("VIF%u.%u: unsupported iftype %d\n", vif->mac->macid,
 			vif->vifid, vif->wdev.iftype);
+		dev_kfree_skb(cmd_skb);
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1882,6 +1883,7 @@ int qtnf_cmd_send_change_sta(struct qtnf_vif *vif, const u8 *mac,
 		break;
 	default:
 		pr_err("unsupported iftype %d\n", vif->wdev.iftype);
+		dev_kfree_skb(cmd_skb);
 		ret = -EINVAL;
 		goto out;
 	}
-- 
2.25.1

[PATCH 4.14 073/191] net: enic: Cure the enic api locking trainwreck

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit a53b59ece86c86d16d12ccdaa1ad0c78250a9d96 ]

enic_dev_wait() has a BUG_ON(in_interrupt()).

Chasing the callers of enic_dev_wait() revealed the gems of enic_reset()
and enic_tx_hang_reset() which are both invoked through work queues in
order to be able to call rtnl_lock(). So far so good.

After locking rtnl both functions acquire enic::enic_api_lock which
serializes against the (ab)use from infiniband. This is where the
trainwreck starts.

enic::enic_api_lock is a spin_lock() which implicitly disables preemption,
but both functions invoke a ton of functions under that lock which can
sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it
can't detect the preempt disabled condition.

This clearly has never been tested with any of the mandatory debug options
for 7+ years, which would have caught that for sure.

Cure it by adding a enic_api_busy member to struct enic, which is modified
and evaluated with enic::enic_api_lock held.

If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true,
it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to
become false.

It would be smarter to wait for a completion of that busy period, but
enic_api_devcmd_proxy_by_index() is called with other spin locks held which
obviously can't sleep.

Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and
with proper debugging enabled the problem would have been caught from the
debug checks in schedule_timeout().

Fixes: 0b038566c0ea ("drivers/net: enic: Add an interface for USNIC to interact with firmware")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cisco/enic/enic.h      |  1 +
 drivers/net/ethernet/cisco/enic/enic_api.c  |  6 +++++
 drivers/net/ethernet/cisco/enic/enic_main.c | 27 ++++++++++++++++-----
 3 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h
index ba032ac9ae86c..893c51a94abbd 100644
--- a/drivers/net/ethernet/cisco/enic/enic.h
+++ b/drivers/net/ethernet/cisco/enic/enic.h
@@ -168,6 +168,7 @@ struct enic {
 	u16 num_vfs;
 #endif
 	spinlock_t enic_api_lock;
+	bool enic_api_busy;
 	struct enic_port_profile *pp;
 
 	/* work queue cache line section */
diff --git a/drivers/net/ethernet/cisco/enic/enic_api.c b/drivers/net/ethernet/cisco/enic/enic_api.c
index b161f24522b87..b028ea2dec2b9 100644
--- a/drivers/net/ethernet/cisco/enic/enic_api.c
+++ b/drivers/net/ethernet/cisco/enic/enic_api.c
@@ -34,6 +34,12 @@ int enic_api_devcmd_proxy_by_index(struct net_device *netdev, int vf,
 	struct vnic_dev *vdev = enic->vdev;
 
 	spin_lock(&enic->enic_api_lock);
+	while (enic->enic_api_busy) {
+		spin_unlock(&enic->enic_api_lock);
+		cpu_relax();
+		spin_lock(&enic->enic_api_lock);
+	}
+
 	spin_lock_bh(&enic->devcmd_lock);
 
 	vnic_dev_cmd_proxy_by_index_start(vdev, vf);
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 52a3b32390a9c..f0bbc0fdeddcb 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2101,8 +2101,6 @@ static int enic_dev_wait(struct vnic_dev *vdev,
 	int done;
 	int err;
 
-	BUG_ON(in_interrupt());
-
 	err = start(vdev, arg);
 	if (err)
 		return err;
@@ -2279,6 +2277,13 @@ static int enic_set_rss_nic_cfg(struct enic *enic)
 		rss_hash_bits, rss_base_cpu, rss_enable);
 }
 
+static void enic_set_api_busy(struct enic *enic, bool busy)
+{
+	spin_lock(&enic->enic_api_lock);
+	enic->enic_api_busy = busy;
+	spin_unlock(&enic->enic_api_lock);
+}
+
 static void enic_reset(struct work_struct *work)
 {
 	struct enic *enic = container_of(work, struct enic, reset);
@@ -2288,7 +2293,9 @@ static void enic_reset(struct work_struct *work)
 
 	rtnl_lock();
 
-	spin_lock(&enic->enic_api_lock);
+	/* Stop any activity from infiniband */
+	enic_set_api_busy(enic, true);
+
 	enic_stop(enic->netdev);
 	enic_dev_soft_reset(enic);
 	enic_reset_addr_lists(enic);
@@ -2296,7 +2303,10 @@ static void enic_reset(struct work_struct *work)
 	enic_set_rss_nic_cfg(enic);
 	enic_dev_set_ig_vlan_rewrite_mode(enic);
 	enic_open(enic->netdev);
-	spin_unlock(&enic->enic_api_lock);
+
+	/* Allow infiniband to fiddle with the device again */
+	enic_set_api_busy(enic, false);
+
 	call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
 
 	rtnl_unlock();
@@ -2308,7 +2318,9 @@ static void enic_tx_hang_reset(struct work_struct *work)
 
 	rtnl_lock();
 
-	spin_lock(&enic->enic_api_lock);
+	/* Stop any activity from infiniband */
+	enic_set_api_busy(enic, true);
+
 	enic_dev_hang_notify(enic);
 	enic_stop(enic->netdev);
 	enic_dev_hang_reset(enic);
@@ -2317,7 +2329,10 @@ static void enic_tx_hang_reset(struct work_struct *work)
 	enic_set_rss_nic_cfg(enic);
 	enic_dev_set_ig_vlan_rewrite_mode(enic);
 	enic_open(enic->netdev);
-	spin_unlock(&enic->enic_api_lock);
+
+	/* Allow infiniband to fiddle with the device again */
+	enic_set_api_busy(enic, false);
+
 	call_netdevice_notifiers(NETDEV_REBOOT, enic->netdev);
 
 	rtnl_unlock();
-- 
2.25.1

[PATCH 4.14 074/191] mfd: sm501: Fix leaks in probe()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8ce24f8967df2836b4557a23e74dc4bb098249f1 ]

This code should clean up if sm501_init_dev() fails.

Fixes: b6d6454fdb66 ("[PATCH] mfd: SM501 core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/sm501.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 3270b8dbc9498..4ca245518a199 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1425,8 +1425,14 @@ static int sm501_plat_probe(struct platform_device *dev)
 		goto err_claim;
 	}
 
-	return sm501_init_dev(sm);
+	ret = sm501_init_dev(sm);
+	if (ret)
+		goto err_unmap;
+
+	return 0;
 
+ err_unmap:
+	iounmap(sm->regs);
  err_claim:
 	release_resource(sm->regs_claim);
 	kfree(sm->regs_claim);
-- 
2.25.1

[PATCH 4.14 075/191] iwlwifi: mvm: split a print to avoid a WARNING in ROC

[Greg Kroah-Hartman]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ]

A print in the remain on channel code was too long and caused
a WARNING, split it.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index b86c7a36d3f17..ec2ecdd1cc4ec 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3198,9 +3198,12 @@ static int iwl_mvm_send_aux_roc_cmd(struct iwl_mvm *mvm,
 	aux_roc_req.apply_time_max_delay = cpu_to_le32(delay);
 
 	IWL_DEBUG_TE(mvm,
-		     "ROC: Requesting to remain on channel %u for %ums (requested = %ums, max_delay = %ums, dtim_interval = %ums)\n",
-		     channel->hw_value, req_dur, duration, delay,
-		     dtim_interval);
+		     "ROC: Requesting to remain on channel %u for %ums\n",
+		     channel->hw_value, req_dur);
+	IWL_DEBUG_TE(mvm,
+		     "\t(requested = %ums, max_delay = %ums, dtim_interval = %ums)\n",
+		     duration, delay, dtim_interval);
+
 	/* Set the node address */
 	memcpy(aux_roc_req.node_addr, vif->addr, ETH_ALEN);
 
-- 
2.25.1

[PATCH 4.14 076/191] usb: gadget: f_ncm: fix ncm_bitrate for SuperSpeed and above.

[Greg Kroah-Hartman]

From: Lorenzo Colitti <lorenzo@google.com>

[ Upstream commit 986499b1569af980a819817f17238015b27793f6 ]

Currently, SuperSpeed NCM gadgets report a speed of 851 Mbps
in USB_CDC_NOTIFY_SPEED_CHANGE. But the calculation appears to
assume 16 packets per microframe, and USB 3 and above no longer
use microframes.

Maximum speed is actually much higher. On a direct connection,
theoretical throughput is at most 3.86 Gbps for gen1x1 and
9.36 Gbps for gen2x1, and I have seen gadget->host iperf
throughput of >2 Gbps for gen1x1 and >4 Gbps for gen2x1.

Unfortunately the ConnectionSpeedChange defined in the CDC spec
only uses 32-bit values, so we can't report accurate numbers for
10Gbps and above. So, report 3.75Gbps for SuperSpeed (which is
roughly maximum theoretical performance) and 4.25Gbps for
SuperSpeed Plus (which is close to the maximum that we can report
in a 32-bit unsigned integer).

This results in:

[50879.191272] cdc_ncm 2-2:1.0 enx228b127e050c: renamed from usb0
[50879.234778] cdc_ncm 2-2:1.0 enx228b127e050c: 3750 mbit/s downlink 3750 mbit/s uplink

on SuperSpeed and:

[50798.434527] cdc_ncm 8-2:1.0 enx228b127e050c: renamed from usb0
[50798.524278] cdc_ncm 8-2:1.0 enx228b127e050c: 4250 mbit/s downlink 4250 mbit/s uplink

on SuperSpeed Plus.

Fixes: 1650113888fe ("usb: gadget: f_ncm: add SuperSpeed descriptors for CDC NCM")
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_ncm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index f62cdf1238d77..fbf15ab700f49 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -92,8 +92,10 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
 /* peak (theoretical) bulk transfer rate in bits-per-second */
 static inline unsigned ncm_bitrate(struct usb_gadget *g)
 {
-	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
-		return 13 * 1024 * 8 * 1000 * 8;
+	if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
+		return 4250000000U;
+	else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 3750000000U;
 	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
 		return 13 * 512 * 8 * 1000 * 8;
 	else
-- 
2.25.1

[PATCH 4.14 077/191] usb: gadget: u_ether: enable qmult on SuperSpeed Plus as well

[Greg Kroah-Hartman]

From: Lorenzo Colitti <lorenzo@google.com>

[ Upstream commit 4eea21dc67b0c6ba15ae41b1defa113a680a858e ]

The u_ether driver has a qmult setting that multiplies the
transmit queue length (which by default is 2).

The intent is that it should be enabled at high/super speed, but
because the code does not explicitly check for USB_SUPER_PLUS,
it is disabled at that speed.

Fix this by ensuring that the queue multiplier is enabled for any
wired link at high speed or above. Using >= for USB_SPEED_*
constants seems correct because it is what the gadget_is_xxxspeed
functions do.

The queue multiplier substantially helps performance at higher
speeds. On a direct SuperSpeed Plus link to a Linux laptop,
iperf3 single TCP stream:

Before (qmult=1): 1.3 Gbps
After  (qmult=5): 3.2 Gbps

Fixes: 04617db7aa68 ("usb: gadget: add SS descriptors to Ethernet gadget")
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/u_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 81d84e0c3c6cd..716edd593a994 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -97,7 +97,7 @@ struct eth_dev {
 static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
 {
 	if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
-					    gadget->speed == USB_SPEED_SUPER))
+					    gadget->speed >= USB_SPEED_SUPER))
 		return qmult * DEFAULT_QLEN;
 	else
 		return DEFAULT_QLEN;
-- 
2.25.1

[PATCH 4.14 078/191] nl80211: fix non-split wiphy information

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ab10c22bc3b2024f0c9eafa463899a071eac8d97 ]

When dumping wiphy information, we try to split the data into
many submessages, but for old userspace we still support the
old mode where this doesn't happen.

However, in this case we were not resetting our state correctly
and dumping multiple messages for each wiphy, which would have
broken such older userspace.

This was broken pretty much immediately afterwards because it
only worked in the original commit where non-split dumps didn't
have any more data than split dumps...

Fixes: fe1abafd942f ("nl80211: re-add channel width and extended capa advertising")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200928130717.3e6d9c6bada2.Ie0f151a8d0d00a8e1e18f6a8c9244dd02496af67@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index bf3caa376f9fe..6bd4f6c8fc2ef 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1784,7 +1784,10 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		 * case we'll continue with more data in the next round,
 		 * but break unconditionally so unsplit data stops here.
 		 */
-		state->split_start++;
+		if (state->split)
+			state->split_start++;
+		else
+			state->split_start = 0;
 		break;
 	case 9:
 		if (rdev->wiphy.extended_capabilities &&
-- 
2.25.1

[PATCH 4.14 079/191] usb: dwc2: Fix INTR OUT transfers in DDMA mode.

[Greg Kroah-Hartman]

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>

[ Upstream commit b2c586eb07efab982419f32b7c3bd96829bc8bcd ]

In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet
corresponds to single descriptor.

Descriptor limit set to mps and desc chain limit set to mps *
MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate
transfer size should be considered correction value for each descriptor.

In start request function, if "continue" is true then dma buffer address
should be incremmented by offset for all type of transfers, not only for
Control DATA_OUT transfers.

Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA")
Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming")
Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete")

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/gadget.c | 40 ++++++++++++++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 03bc479d04e0d..d2d4067a1a5f4 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -704,8 +704,11 @@ static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
  */
 static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
 {
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
 	int is_isoc = hs_ep->isochronous;
 	unsigned int maxsize;
+	u32 mps = hs_ep->ep.maxpacket;
+	int dir_in = hs_ep->dir_in;
 
 	if (is_isoc)
 		maxsize = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
@@ -716,6 +719,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
 	/* Above size of one descriptor was chosen, multiple it */
 	maxsize *= MAX_DMA_DESC_NUM_GENERIC;
 
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+			maxsize = mps * MAX_DMA_DESC_NUM_GENERIC;
+
 	return maxsize;
 }
 
@@ -731,11 +739,14 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
  * Isochronous - descriptor rx/tx bytes bitfield limit,
  * Control In/Bulk/Interrupt - multiple of mps. This will allow to not
  * have concatenations from various descriptors within one packet.
+ * Interrupt OUT - if mps not multiple of 4 then a single packet corresponds
+ * to a single descriptor.
  *
  * Selects corresponding mask for RX/TX bytes as well.
  */
 static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
 {
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
 	u32 mps = hs_ep->ep.maxpacket;
 	int dir_in = hs_ep->dir_in;
 	u32 desc_size = 0;
@@ -759,6 +770,13 @@ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
 		desc_size -= desc_size % mps;
 	}
 
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) {
+			desc_size = mps;
+			*mask = DEV_DMA_NBYTES_MASK;
+		}
+
 	return desc_size;
 }
 
@@ -1094,13 +1112,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
 				length += (mps - (length % mps));
 		}
 
-		/*
-		 * If more data to send, adjust DMA for EP0 out data stage.
-		 * ureq->dma stays unchanged, hence increment it by already
-		 * passed passed data count before starting new transaction.
-		 */
-		if (!index && hsotg->ep0_state == DWC2_EP0_DATA_OUT &&
-		    continuing)
+		if (continuing)
 			offset = ureq->actual;
 
 		/* Fill DDMA chain entries */
@@ -2260,22 +2272,36 @@ static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
  */
 static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep)
 {
+	const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
 	unsigned int bytes_rem = 0;
+	unsigned int bytes_rem_correction = 0;
 	struct dwc2_dma_desc *desc = hs_ep->desc_list;
 	int i;
 	u32 status;
+	u32 mps = hs_ep->ep.maxpacket;
+	int dir_in = hs_ep->dir_in;
 
 	if (!desc)
 		return -EINVAL;
 
+	/* Interrupt OUT EP with mps not multiple of 4 */
+	if (hs_ep->index)
+		if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+			bytes_rem_correction = 4 - (mps % 4);
+
 	for (i = 0; i < hs_ep->desc_count; ++i) {
 		status = desc->status;
 		bytes_rem += status & DEV_DMA_NBYTES_MASK;
+		bytes_rem -= bytes_rem_correction;
 
 		if (status & DEV_DMA_STS_MASK)
 			dev_err(hsotg->dev, "descriptor %d closed with %x\n",
 				i, status & DEV_DMA_STS_MASK);
+
+		if (status & DEV_DMA_L)
+			break;
+
 		desc++;
 	}
 
-- 
2.25.1

[PATCH 4.14 080/191] scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 38b2db564d9ab7797192ef15d7aade30633ceeae ]

The be_fill_queue() function can only fail when "eq_vaddress" is NULL and
since it's non-NULL here that means the function call can't fail.  But
imagine if it could, then in that situation we would want to store the
"paddr" so that dma memory can be released.

Link: https://lore.kernel.org/r/20200928091300.GD377727@mwanda
Fixes: bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/be2iscsi/be_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index b4542e7e2ad5b..86e1eac3a4703 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -3013,6 +3013,7 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 			goto create_eq_error;
 		}
 
+		mem->dma = paddr;
 		mem->va = eq_vaddress;
 		ret = be_fill_queue(eq, phba->params.num_eq_entries,
 				    sizeof(struct be_eq_entry), eq_vaddress);
@@ -3022,7 +3023,6 @@ static int beiscsi_create_eqs(struct beiscsi_hba *phba,
 			goto create_eq_error;
 		}
 
-		mem->dma = paddr;
 		ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
 					    phwi_context->cur_eqd);
 		if (ret) {
@@ -3079,6 +3079,7 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 			goto create_cq_error;
 		}
 
+		mem->dma = paddr;
 		ret = be_fill_queue(cq, phba->params.num_cq_entries,
 				    sizeof(struct sol_cqe), cq_vaddress);
 		if (ret) {
@@ -3088,7 +3089,6 @@ static int beiscsi_create_cqs(struct beiscsi_hba *phba,
 			goto create_cq_error;
 		}
 
-		mem->dma = paddr;
 		ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false,
 					    false, 0);
 		if (ret) {
-- 
2.25.1

[PATCH 4.14 081/191] mwifiex: fix double free

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 53708f4fd9cfe389beab5c8daa763bcd0e0b4aef ]

clang static analysis reports this problem:

sdio.c:2403:3: warning: Attempt to free released memory
        kfree(card->mpa_rx.buf);
        ^~~~~~~~~~~~~~~~~~~~~~~

When mwifiex_init_sdio() fails in its first call to
mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it
again.  If the second alloc of mpa_tx.buf fails, the error
handler will try to free the old, previously freed mpa_rx.buf.
Reviewing the code, it looks like a second double free would
happen with mwifiex_cleanup_sdio().

So set both pointers to NULL when they are freed.

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201004131931.29782-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/sdio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index fd5183c10c4ed..0e858621eef32 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -1973,6 +1973,8 @@ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter,
 		kfree(card->mpa_rx.buf);
 		card->mpa_tx.buf_size = 0;
 		card->mpa_rx.buf_size = 0;
+		card->mpa_tx.buf = NULL;
+		card->mpa_rx.buf = NULL;
 	}
 
 	return ret;
-- 
2.25.1

[PATCH 4.14 082/191] net: korina: fix kfree of rx/tx descriptor array

[Greg Kroah-Hartman]

From: Valentin Vidic <vvidic@valentin-vidic.from.hr>

[ Upstream commit 3af5f0f5c74ecbaf757ef06c3f80d56751277637 ]

kmalloc returns KSEG0 addresses so convert back from KSEG1
in kfree. Also make sure array is freed when the driver is
unloaded from the kernel.

Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC")
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/korina.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index 3c0a6451273df..1357d464e8c43 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -1188,7 +1188,7 @@ static int korina_probe(struct platform_device *pdev)
 	return rc;
 
 probe_err_register:
-	kfree(lp->td_ring);
+	kfree(KSEG0ADDR(lp->td_ring));
 probe_err_td_ring:
 	iounmap(lp->tx_dma_regs);
 probe_err_dma_tx:
@@ -1208,6 +1208,7 @@ static int korina_remove(struct platform_device *pdev)
 	iounmap(lp->eth_regs);
 	iounmap(lp->rx_dma_regs);
 	iounmap(lp->tx_dma_regs);
+	kfree(KSEG0ADDR(lp->td_ring));
 
 	unregister_netdev(bif->dev);
 	free_netdev(bif->dev);
-- 
2.25.1

[PATCH 4.14 083/191] mm/memcg: fix device private memcg accounting

[Greg Kroah-Hartman]

From: Ralph Campbell <rcampbell@nvidia.com>

[ Upstream commit 9a137153fc8798a89d8fce895cd0a06ea5b8e37c ]

The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages are
never handled.  Fix this by checking for non_swap_entry() after handling
device private swap PTEs.

I assume the memory cgroup accounting would be off somehow when moving
a process to another memory cgroup.  Currently, the device private page
is charged like a normal anonymous page when allocated and is uncharged
when the page is freed so I think that path is OK.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lkml.kernel.org/r/20201009215952.2726-1-rcampbell@nvidia.com
xFixes: c733a82874a7 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/memcontrol.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 5cbcd4b81bf8f..70707d44a6903 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4514,7 +4514,7 @@ static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
 	struct page *page = NULL;
 	swp_entry_t ent = pte_to_swp_entry(ptent);
 
-	if (!(mc.flags & MOVE_ANON) || non_swap_entry(ent))
+	if (!(mc.flags & MOVE_ANON))
 		return NULL;
 
 	/*
@@ -4533,6 +4533,9 @@ static struct page *mc_handle_swap_pte(struct vm_area_struct *vma,
 		return page;
 	}
 
+	if (non_swap_entry(ent))
+		return NULL;
+
 	/*
 	 * Because lookup_swap_cache() updates some statistics counter,
 	 * we call find_get_page() with swapper_space directly.
-- 
2.25.1

[PATCH 4.14 084/191] mm, oom_adj: dont loop through tasks in __set_oom_adj when not necessary

[Greg Kroah-Hartman]

From: Suren Baghdasaryan <surenb@google.com>

[ Upstream commit 67197a4f28d28d0b073ab0427b03cb2ee5382578 ]

Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm.  This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.

Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important.  Such operation can happen frequently.  We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression.  Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us.  Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.

Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK).  Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes.  To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex.  Its scope is changed to global.

The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork().  To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified.  Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare.  Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.

With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.

[surenb@google.com: v3]
  Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com

Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj")
Reported-by: Tim Murray <timmurray@google.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Christian Kellner <christian@kellner.me>
Cc: Adrian Reber <areber@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com
Debugged-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/base.c                 |  3 +--
 include/linux/oom.h            |  1 +
 include/linux/sched/coredump.h |  1 +
 kernel/fork.c                  | 21 +++++++++++++++++++++
 mm/oom_kill.c                  |  2 ++
 5 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index 64695dcf89f3b..eeb81d9648c67 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1041,7 +1041,6 @@ static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count,
 
 static int __set_oom_adj(struct file *file, int oom_adj, bool legacy)
 {
-	static DEFINE_MUTEX(oom_adj_mutex);
 	struct mm_struct *mm = NULL;
 	struct task_struct *task;
 	int err = 0;
@@ -1081,7 +1080,7 @@ static int __set_oom_adj(struct file *file, int oom_adj, bool legacy)
 		struct task_struct *p = find_lock_task_mm(task);
 
 		if (p) {
-			if (atomic_read(&p->mm->mm_users) > 1) {
+			if (test_bit(MMF_MULTIPROCESS, &p->mm->flags)) {
 				mm = p->mm;
 				mmgrab(mm);
 			}
diff --git a/include/linux/oom.h b/include/linux/oom.h
index 6adac113e96d2..c84597595cb41 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -45,6 +45,7 @@ struct oom_control {
 };
 
 extern struct mutex oom_lock;
+extern struct mutex oom_adj_mutex;
 
 static inline void set_current_oom_origin(void)
 {
diff --git a/include/linux/sched/coredump.h b/include/linux/sched/coredump.h
index ecdc6542070f1..dfd82eab29025 100644
--- a/include/linux/sched/coredump.h
+++ b/include/linux/sched/coredump.h
@@ -72,6 +72,7 @@ static inline int get_dumpable(struct mm_struct *mm)
 #define MMF_DISABLE_THP		24	/* disable THP for all VMAs */
 #define MMF_OOM_VICTIM		25	/* mm is the oom victim */
 #define MMF_OOM_REAP_QUEUED	26	/* mm was queued for oom_reaper */
+#define MMF_MULTIPROCESS	27	/* mm is shared between processes */
 #define MMF_DISABLE_THP_MASK	(1 << MMF_DISABLE_THP)
 
 #define MMF_INIT_MASK		(MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK |\
diff --git a/kernel/fork.c b/kernel/fork.c
index 0a328cf0cb136..535aeb7ca145c 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1544,6 +1544,25 @@ static __always_inline void delayed_free_task(struct task_struct *tsk)
 		free_task(tsk);
 }
 
+static void copy_oom_score_adj(u64 clone_flags, struct task_struct *tsk)
+{
+	/* Skip if kernel thread */
+	if (!tsk->mm)
+		return;
+
+	/* Skip if spawning a thread or using vfork */
+	if ((clone_flags & (CLONE_VM | CLONE_THREAD | CLONE_VFORK)) != CLONE_VM)
+		return;
+
+	/* We need to synchronize with __set_oom_adj */
+	mutex_lock(&oom_adj_mutex);
+	set_bit(MMF_MULTIPROCESS, &tsk->mm->flags);
+	/* Update the values in case they were changed after copy_signal */
+	tsk->signal->oom_score_adj = current->signal->oom_score_adj;
+	tsk->signal->oom_score_adj_min = current->signal->oom_score_adj_min;
+	mutex_unlock(&oom_adj_mutex);
+}
+
 /*
  * This creates a new process as a copy of the old one,
  * but does not actually start it yet.
@@ -1952,6 +1971,8 @@ static __latent_entropy struct task_struct *copy_process(
 	trace_task_newtask(p, clone_flags);
 	uprobe_copy_process(p, clone_flags);
 
+	copy_oom_score_adj(clone_flags, p);
+
 	return p;
 
 bad_fork_cancel_cgroup:
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 7a5c0b229c6ae..6482d743c5c88 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -53,6 +53,8 @@ int sysctl_oom_kill_allocating_task;
 int sysctl_oom_dump_tasks = 1;
 
 DEFINE_MUTEX(oom_lock);
+/* Serializes oom_score_adj and oom_score_adj_min updates */
+DEFINE_MUTEX(oom_adj_mutex);
 
 #ifdef CONFIG_NUMA
 /**
-- 
2.25.1

[PATCH 4.14 085/191] IB/mlx4: Fix starvation in paravirt mux/demux

[Greg Kroah-Hartman]

From: Håkon Bugge <haakon.bugge@oracle.com>

[ Upstream commit 7fd1507df7cee9c533f38152fcd1dd769fcac6ce ]

The mlx4 driver will proxy MAD packets through the PF driver. A VM or an
instantiated VF will send its MAD packets to the PF driver using
loop-back. The PF driver will be informed by an interrupt, but defer the
handling and polling of CQEs to a worker thread running on an ordered
work-queue.

Consider the following scenario: the VMs will in short proximity in time,
for example due to a network event, send many MAD packets to the PF
driver. Lets say there are K VMs, each sending N packets.

The interrupt from the first VM will start the worker thread, which will
poll N CQEs. A common case here is where the PF driver will multiplex the
packets received from the VMs out on the wire QP.

But before the wire QP has returned a send CQE and associated interrupt,
the other K - 1 VMs have sent their N packets as well.

The PF driver has to multiplex K * N packets out on the wire QP. But the
send-queue on the wire QP has a finite capacity.

So, in this scenario, if K * N is larger than the send-queue capacity of
the wire QP, we will get MAD packets dropped on the floor with this
dynamic debug message:

mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)

and this despite the fact that the wire send-queue could have capacity,
but the PF driver isn't aware, because the wire send CQEs have not yet
been polled.

We can also have a similar scenario inbound, with a wire recv-queue larger
than the tunnel QP's send-queue. If many remote peers send MAD packets to
the very same VM, the tunnel send-queue destined to the VM could allegedly
be construed to be full by the PF driver.

This starvation is fixed by introducing separate work queues for the wire
QPs vs. the tunnel QPs.

With this fix, using a dual ported HCA, 8 VFs instantiated, we could run
cmtime on each of the 18 interfaces towards a similar configured peer,
each cmtime instance with 800 QPs (all in all 14400 QPs) without a single
CM packet getting lost.

Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-5-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx4/mad.c     | 34 +++++++++++++++++++++++++---
 drivers/infiniband/hw/mlx4/mlx4_ib.h |  2 ++
 2 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index c69158ccab822..60d4f2c9c24d8 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -1305,6 +1305,18 @@ static void mlx4_ib_tunnel_comp_handler(struct ib_cq *cq, void *arg)
 	spin_unlock_irqrestore(&dev->sriov.going_down_lock, flags);
 }
 
+static void mlx4_ib_wire_comp_handler(struct ib_cq *cq, void *arg)
+{
+	unsigned long flags;
+	struct mlx4_ib_demux_pv_ctx *ctx = cq->cq_context;
+	struct mlx4_ib_dev *dev = to_mdev(ctx->ib_dev);
+
+	spin_lock_irqsave(&dev->sriov.going_down_lock, flags);
+	if (!dev->sriov.is_going_down && ctx->state == DEMUX_PV_STATE_ACTIVE)
+		queue_work(ctx->wi_wq, &ctx->work);
+	spin_unlock_irqrestore(&dev->sriov.going_down_lock, flags);
+}
+
 static int mlx4_ib_post_pv_qp_buf(struct mlx4_ib_demux_pv_ctx *ctx,
 				  struct mlx4_ib_demux_pv_qp *tun_qp,
 				  int index)
@@ -2012,7 +2024,8 @@ static int create_pv_resources(struct ib_device *ibdev, int slave, int port,
 		cq_size *= 2;
 
 	cq_attr.cqe = cq_size;
-	ctx->cq = ib_create_cq(ctx->ib_dev, mlx4_ib_tunnel_comp_handler,
+	ctx->cq = ib_create_cq(ctx->ib_dev,
+			       create_tun ? mlx4_ib_tunnel_comp_handler : mlx4_ib_wire_comp_handler,
 			       NULL, ctx, &cq_attr);
 	if (IS_ERR(ctx->cq)) {
 		ret = PTR_ERR(ctx->cq);
@@ -2049,6 +2062,7 @@ static int create_pv_resources(struct ib_device *ibdev, int slave, int port,
 		INIT_WORK(&ctx->work, mlx4_ib_sqp_comp_worker);
 
 	ctx->wq = to_mdev(ibdev)->sriov.demux[port - 1].wq;
+	ctx->wi_wq = to_mdev(ibdev)->sriov.demux[port - 1].wi_wq;
 
 	ret = ib_req_notify_cq(ctx->cq, IB_CQ_NEXT_COMP);
 	if (ret) {
@@ -2192,7 +2206,7 @@ static int mlx4_ib_alloc_demux_ctx(struct mlx4_ib_dev *dev,
 		goto err_mcg;
 	}
 
-	snprintf(name, sizeof name, "mlx4_ibt%d", port);
+	snprintf(name, sizeof(name), "mlx4_ibt%d", port);
 	ctx->wq = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
 	if (!ctx->wq) {
 		pr_err("Failed to create tunnelling WQ for port %d\n", port);
@@ -2200,7 +2214,15 @@ static int mlx4_ib_alloc_demux_ctx(struct mlx4_ib_dev *dev,
 		goto err_wq;
 	}
 
-	snprintf(name, sizeof name, "mlx4_ibud%d", port);
+	snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
+	ctx->wi_wq = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
+	if (!ctx->wi_wq) {
+		pr_err("Failed to create wire WQ for port %d\n", port);
+		ret = -ENOMEM;
+		goto err_wiwq;
+	}
+
+	snprintf(name, sizeof(name), "mlx4_ibud%d", port);
 	ctx->ud_wq = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
 	if (!ctx->ud_wq) {
 		pr_err("Failed to create up/down WQ for port %d\n", port);
@@ -2211,6 +2233,10 @@ static int mlx4_ib_alloc_demux_ctx(struct mlx4_ib_dev *dev,
 	return 0;
 
 err_udwq:
+	destroy_workqueue(ctx->wi_wq);
+	ctx->wi_wq = NULL;
+
+err_wiwq:
 	destroy_workqueue(ctx->wq);
 	ctx->wq = NULL;
 
@@ -2258,12 +2284,14 @@ static void mlx4_ib_free_demux_ctx(struct mlx4_ib_demux_ctx *ctx)
 				ctx->tun[i]->state = DEMUX_PV_STATE_DOWNING;
 		}
 		flush_workqueue(ctx->wq);
+		flush_workqueue(ctx->wi_wq);
 		for (i = 0; i < dev->dev->caps.sqp_demux; i++) {
 			destroy_pv_resources(dev, i, ctx->port, ctx->tun[i], 0);
 			free_pv_object(dev, i, ctx->port);
 		}
 		kfree(ctx->tun);
 		destroy_workqueue(ctx->ud_wq);
+		destroy_workqueue(ctx->wi_wq);
 		destroy_workqueue(ctx->wq);
 	}
 }
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 1fa19820355af..ed72c09080c1d 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -463,6 +463,7 @@ struct mlx4_ib_demux_pv_ctx {
 	struct ib_pd *pd;
 	struct work_struct work;
 	struct workqueue_struct *wq;
+	struct workqueue_struct *wi_wq;
 	struct mlx4_ib_demux_pv_qp qp[2];
 };
 
@@ -470,6 +471,7 @@ struct mlx4_ib_demux_ctx {
 	struct ib_device *ib_dev;
 	int port;
 	struct workqueue_struct *wq;
+	struct workqueue_struct *wi_wq;
 	struct workqueue_struct *ud_wq;
 	spinlock_t ud_lock;
 	atomic64_t subnet_prefix;
-- 
2.25.1

[PATCH 4.14 086/191] IB/mlx4: Adjust delayed work when a dup is observed

[Greg Kroah-Hartman]

From: Håkon Bugge <haakon.bugge@oracle.com>

[ Upstream commit 785167a114855c5aa75efca97000e405c2cc85bf ]

When scheduling delayed work to clean up the cache, if the entry already
has been scheduled for deletion, we adjust the delay.

Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-7-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx4/cm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index 8c79a480f2b76..d3e11503e67ca 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -307,6 +307,9 @@ static void schedule_delayed(struct ib_device *ibdev, struct id_map_entry *id)
 	if (!sriov->is_going_down) {
 		id->scheduled_delete = 1;
 		schedule_delayed_work(&id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
+	} else if (id->scheduled_delete) {
+		/* Adjust timeout if already scheduled */
+		mod_delayed_work(system_wq, &id->timeout, CM_CLEANUP_CACHE_TIMEOUT);
 	}
 	spin_unlock_irqrestore(&sriov->going_down_lock, flags);
 	spin_unlock(&sriov->id_map_lock);
-- 
2.25.1

[PATCH 4.14 087/191] powerpc/pseries: Fix missing of_node_put() in rng_init()

[Greg Kroah-Hartman]

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit 67c3e59443f5fc77be39e2ce0db75fbfa78c7965 ]

The call to of_find_compatible_node() returns a node pointer with
refcount incremented thus it must be explicitly decremented here
before returning.

Fixes: a489043f4626 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530522496-14816-1-git-send-email-hofrat@osadl.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/rng.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/pseries/rng.c b/arch/powerpc/platforms/pseries/rng.c
index 31ca557af60bc..262b8c5e1b9d0 100644
--- a/arch/powerpc/platforms/pseries/rng.c
+++ b/arch/powerpc/platforms/pseries/rng.c
@@ -40,6 +40,7 @@ static __init int rng_init(void)
 
 	ppc_md.get_random_seed = pseries_get_random_long;
 
+	of_node_put(dn);
 	return 0;
 }
 machine_subsys_initcall(pseries, rng_init);
-- 
2.25.1

[PATCH 4.14 088/191] powerpc/icp-hv: Fix missing of_node_put() in success path

[Greg Kroah-Hartman]

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit d3e669f31ec35856f5e85df9224ede5bdbf1bc7b ]

Both of_find_compatible_node() and of_find_node_by_type() will return
a refcounted node on success - thus for the success path the node must
be explicitly released with a of_node_put().

Fixes: 0b05ac6e2480 ("powerpc/xics: Rewrite XICS driver")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1530691407-3991-1-git-send-email-hofrat@osadl.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/xics/icp-hv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index bbc839a98c414..003deaabb5680 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -179,6 +179,7 @@ int icp_hv_init(void)
 
 	icp_ops = &icp_hv_ops;
 
+	of_node_put(np);
 	return 0;
 }
 
-- 
2.25.1

[PATCH 4.14 089/191] mtd: lpddr: fix excessive stack usage with clang

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 3e1b6469f8324bee5927b063e2aca30d3e56b907 ]

Building lpddr2_nvm with clang can result in a giant stack usage
in one function:

drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]

The problem is that clang decides to build a copy of the mtd_info
structure on the stack and then do a memcpy() into the actual version. It
shouldn't really do it that way, but it's not strictly a bug either.

As a workaround, use a static const version of the structure to assign
most of the members upfront and then only set the few members that
require runtime knowledge at probe time.

Fixes: 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200505140136.263461-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/lpddr/lpddr2_nvm.c | 35 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c
index 2342277c9bcb0..5e36366d9b36d 100644
--- a/drivers/mtd/lpddr/lpddr2_nvm.c
+++ b/drivers/mtd/lpddr/lpddr2_nvm.c
@@ -408,6 +408,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
 	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
 }
 
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+	.type		= MTD_RAM,
+	.writesize	= 1,
+	.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+	._read		= lpddr2_nvm_read,
+	._write		= lpddr2_nvm_write,
+	._erase		= lpddr2_nvm_erase,
+	._unlock	= lpddr2_nvm_unlock,
+	._lock		= lpddr2_nvm_lock,
+};
+
 /*
  * lpddr2_nvm driver probe method
  */
@@ -448,6 +459,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		.pfow_base	= OW_BASE_ADDRESS,
 		.fldrv_priv	= pcm_data,
 	};
+
 	if (IS_ERR(map->virt))
 		return PTR_ERR(map->virt);
 
@@ -459,22 +471,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		return PTR_ERR(pcm_data->ctl_regs);
 
 	/* Populate mtd_info data structure */
-	*mtd = (struct mtd_info) {
-		.dev		= { .parent = &pdev->dev },
-		.name		= pdev->dev.init_name,
-		.type		= MTD_RAM,
-		.priv		= map,
-		.size		= resource_size(add_range),
-		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
-		.writesize	= 1,
-		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
-		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
-		._read		= lpddr2_nvm_read,
-		._write		= lpddr2_nvm_write,
-		._erase		= lpddr2_nvm_erase,
-		._unlock	= lpddr2_nvm_unlock,
-		._lock		= lpddr2_nvm_lock,
-	};
+	*mtd = lpddr2_nvm_mtd_info;
+	mtd->dev.parent		= &pdev->dev;
+	mtd->name		= pdev->dev.init_name;
+	mtd->priv		= map;
+	mtd->size		= resource_size(add_range);
+	mtd->erasesize		= ERASE_BLOCKSIZE * pcm_data->bus_width;
+	mtd->writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width;
 
 	/* Verify the presence of the device looking for PFOW string */
 	if (!lpddr2_nvm_pfow_present(map)) {
-- 
2.25.1

[PATCH 4.14 090/191] mtd: mtdoops: Dont write panic data twice

[Greg Kroah-Hartman]

From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>

[ Upstream commit c1cf1d57d1492235309111ea6a900940213a9166 ]

If calling mtdoops_write, don't also schedule work to be done later.

Although this appears to not be causing an issue, possibly because the
scheduled work will never get done, it is confusing.

Fixes: 016c1291ce70 ("mtd: mtdoops: do not use mtd->panic_write directly")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200903034217.23079-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/mtdoops.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 97bb8f6304d4f..09165eaac7a15 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -313,12 +313,13 @@ static void mtdoops_do_dump(struct kmsg_dumper *dumper,
 	kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
 			     record_size - MTDOOPS_HEADER_SIZE, NULL);
 
-	/* Panics must be written immediately */
-	if (reason != KMSG_DUMP_OOPS)
+	if (reason != KMSG_DUMP_OOPS) {
+		/* Panics must be written immediately */
 		mtdoops_write(cxt, 1);
-
-	/* For other cases, schedule work to write it "nicely" */
-	schedule_work(&cxt->work_write);
+	} else {
+		/* For other cases, schedule work to write it "nicely" */
+		schedule_work(&cxt->work_write);
+	}
 }
 
 static void mtdoops_notify_add(struct mtd_info *mtd)
-- 
2.25.1

[PATCH 4.14 091/191] ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values

[Greg Kroah-Hartman]

From: Guillaume Tucker <guillaume.tucker@collabora.com>

[ Upstream commit 8e007b367a59bcdf484c81f6df9bd5a4cc179ca6 ]

The L310_PREFETCH_CTRL register bits 28 and 29 to enable data and
instruction prefetch respectively can also be accessed via the
L2X0_AUX_CTRL register.  They appear to be actually wired together in
hardware between the registers.  Changing them in the prefetch
register only will get undone when restoring the aux control register
later on.  For this reason, set these bits in both registers during
initialisation according to the devicetree property values.

Link: https://lore.kernel.org/lkml/76f2f3ad5e77e356e0a5b99ceee1e774a2842c25.1597061474.git.guillaume.tucker@collabora.com/

Fixes: ec3bd0e68a67 ("ARM: 8391/1: l2c: add options to overwrite prefetching behavior")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/cache-l2x0.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 808efbb89b88c..02f613def40dc 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -1261,20 +1261,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
 	ret = of_property_read_u32(np, "prefetch-data", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-data property value is missing\n");
 	}
 
 	ret = of_property_read_u32(np, "prefetch-instr", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-instr property value is missing\n");
 	}
-- 
2.25.1

[PATCH 4.14 092/191] arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER

[Greg Kroah-Hartman]

From: Necip Fazil Yildiran <fazilyildiran@gmail.com>

[ Upstream commit 63bcf87cb1c57956e1179f1a78dde625c7e3cba7 ]

When ARC_SOC_HSDK is enabled and RESET_CONTROLLER is disabled, it results
in the following Kbuild warning:

WARNING: unmet direct dependencies detected for RESET_HSDK
  Depends on [n]: RESET_CONTROLLER [=n] && HAS_IOMEM [=y] && (ARC_SOC_HSDK [=y] || COMPILE_TEST [=n])
  Selected by [y]:
  - ARC_SOC_HSDK [=y] && ISA_ARCV2 [=y]

The reason is that ARC_SOC_HSDK selects RESET_HSDK without depending on or
selecting RESET_CONTROLLER while RESET_HSDK is subordinate to
RESET_CONTROLLER.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes: a528629dfd3b ("ARC: [plat-hsdk] select CONFIG_RESET_HSDK from Kconfig")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/plat-hsdk/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index 8fb1600b29b76..e5f65a044c7b9 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -11,4 +11,5 @@ menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
+	select RESET_CONTROLLER
 	select RESET_HSDK
-- 
2.25.1

[PATCH 4.14 093/191] xfs: limit entries returned when counting fsmap records

[Greg Kroah-Hartman]

From: Darrick J. Wong <darrick.wong@oracle.com>

[ Upstream commit acd1ac3aa22fd58803a12d26b1ab7f70232f8d8d ]

If userspace asked fsmap to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.

Fixes: e89c041338ed ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_fsmap.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c
index 43cfc07996a43..e7622e0841868 100644
--- a/fs/xfs/xfs_fsmap.c
+++ b/fs/xfs/xfs_fsmap.c
@@ -273,6 +273,9 @@ xfs_getfsmap_helper(
 
 	/* Are we just counting mappings? */
 	if (info->head->fmh_count == 0) {
+		if (info->head->fmh_entries == UINT_MAX)
+			return -ECANCELED;
+
 		if (rec_daddr > info->next_daddr)
 			info->head->fmh_entries++;
 
-- 
2.25.1

[PATCH 4.14 094/191] RDMA/qedr: Fix use of uninitialized field

[Greg Kroah-Hartman]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit a379ad54e55a12618cae7f6333fd1b3071de9606 ]

dev->attr.page_size_caps was used uninitialized when setting device
attributes

Fixes: ec72fce401c6 ("qedr: Add support for RoCE HW init")
Link: https://lore.kernel.org/r/20200902165741.8355-4-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/qedr/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c
index 3e48ed64760b7..8c9e23d1f434e 100644
--- a/drivers/infiniband/hw/qedr/main.c
+++ b/drivers/infiniband/hw/qedr/main.c
@@ -548,7 +548,7 @@ static int qedr_set_device_attr(struct qedr_dev *dev)
 	qed_attr = dev->ops->rdma_query_device(dev->rdma_ctx);
 
 	/* Part 2 - check capabilities */
-	page_size = ~dev->attr.page_size_caps + 1;
+	page_size = ~qed_attr->page_size_caps + 1;
 	if (page_size > PAGE_SIZE) {
 		DP_ERR(dev,
 		       "Kernel PAGE_SIZE is %ld which is smaller than minimum page size (%d) required by qedr\n",
-- 
2.25.1

[PATCH 4.14 095/191] powerpc/tau: Use appropriate temperature sample interval

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 66943005cc41f48e4d05614e8f76c0ca1812f0fd ]

According to the MPC750 Users Manual, the SITV value in Thermal
Management Register 3 is 13 bits long. The present code calculates the
SITV value as 60 * 500 cycles. This would overflow to give 10 us on
a 500 MHz CPU rather than the intended 60 us. (But according to the
Microprocessor Datasheet, there is also a factor of 266 that has to be
applied to this value on certain parts i.e. speed sort above 266 MHz.)
Always use the maximum cycle count, as recommended by the Datasheet.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/896f542e5f0f1d6cf8218524c2b67d79f3d69b3c.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/reg.h |  2 +-
 arch/powerpc/kernel/tau_6xx.c  | 12 ++++--------
 2 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 05f3c2b3aa0ec..d6be5781a97ce 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -753,7 +753,7 @@
 #define THRM1_TIN	(1 << 31)
 #define THRM1_TIV	(1 << 30)
 #define THRM1_THRES(x)	((x&0x7f)<<23)
-#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM3_SITV(x)	((x & 0x1fff) << 1)
 #define THRM1_TID	(1<<2)
 #define THRM1_TIE	(1<<1)
 #define THRM1_V		(1<<0)
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index a3374e8a258c6..64a27b20cf55e 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -175,15 +175,11 @@ static void tau_timeout(void * info)
 	 * complex sleep code needs to be added. One mtspr every time
 	 * tau_timeout is called is probably not a big deal.
 	 *
-	 * Enable thermal sensor and set up sample interval timer
-	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
-	 * call is implemented, just assume a 500 mhz clock. It doesn't really
-	 * matter if we take too long for a compare since it's all interrupt
-	 * driven anyway.
-	 *
-	 * use a extra long time.. (60 us @ 500 mhz)
+	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
+	 * recommends that "the maximum value be set in THRM3 under all
+	 * conditions."
 	 */
-	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
+	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
 
 	local_irq_restore(flags);
 }
-- 
2.25.1

[PATCH 4.14 096/191] powerpc/tau: Remove duplicated set_thresholds() call

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 420ab2bc7544d978a5d0762ee736412fe9c796ab ]

The commentary at the call site seems to disagree with the code. The
conditional prevents calling set_thresholds() via the exception handler,
which appears to crash. Perhaps that's because it immediately triggers
another TAU exception. Anyway, calling set_thresholds() from TAUupdate()
is redundant because tau_timeout() does so.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7c7ee33232cf72a6a6bbb6ef05838b2e2b113c0.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/tau_6xx.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index 64a27b20cf55e..9e8b709a2aae4 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -108,11 +108,6 @@ void TAUupdate(int cpu)
 #ifdef DEBUG
 	printk("grew = %d\n", tau[cpu].grew);
 #endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
-	set_thresholds(cpu);
-#endif
-
 }
 
 #ifdef CONFIG_TAU_INT
-- 
2.25.1

[PATCH 4.14 097/191] powerpc/tau: Disable TAU between measurements

[Greg Kroah-Hartman]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit e63d6fb5637e92725cf143559672a34b706bca4f ]

Enabling CONFIG_TAU_INT causes random crashes:

Unrecoverable exception 1700 at c0009414 (msr=1000)
Oops: Unrecoverable exception, sig: 6 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-pmac-00043-gd5f545e1a8593 #5
NIP:  c0009414 LR: c0009414 CTR: c00116fc
REGS: c0799eb8 TRAP: 1700   Not tainted  (5.7.0-pmac-00043-gd5f545e1a8593)
MSR:  00001000 <ME>  CR: 22000228  XER: 00000100

GPR00: 00000000 c0799f70 c076e300 00800000 0291c0ac 00e00000 c076e300 00049032
GPR08: 00000001 c00116fc 00000000 dfbd3200 ffffffff 007f80a8 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c075ce04
GPR24: c075ce04 dfff8880 c07b0000 c075ce04 00080000 00000001 c079ef98 c079ef5c
NIP [c0009414] arch_cpu_idle+0x24/0x6c
LR [c0009414] arch_cpu_idle+0x24/0x6c
Call Trace:
[c0799f70] [00000001] 0x1 (unreliable)
[c0799f80] [c0060990] do_idle+0xd8/0x17c
[c0799fa0] [c0060ba4] cpu_startup_entry+0x20/0x28
[c0799fb0] [c072d220] start_kernel+0x434/0x44c
[c0799ff0] [00003860] 0x3860
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX 3d20c07b XXXXXXXX XXXXXXXX XXXXXXXX 7c0802a6
XXXXXXXX XXXXXXXX XXXXXXXX 4e800421 XXXXXXXX XXXXXXXX XXXXXXXX 7d2000a6
---[ end trace 3a0c9b5cb216db6b ]---

Resolve this problem by disabling each THRMn comparator when handling
the associated THRMn interrupt and by disabling the TAU entirely when
updating THRMn thresholds.

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5a0ba3dc5612c7aac596727331284a3676c08472.1599260540.git.fthain@telegraphics.com.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/tau_6xx.c  | 65 +++++++++++++---------------------
 arch/powerpc/platforms/Kconfig |  9 ++---
 2 files changed, 26 insertions(+), 48 deletions(-)

diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index 9e8b709a2aae4..2615cd66dad84 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -38,8 +38,6 @@ static struct tau_temp
 
 struct timer_list tau_timer;
 
-#undef DEBUG
-
 /* TODO: put these in a /proc interface, with some sanity checks, and maybe
  * dynamic adjustment to minimize # of interrupts */
 /* configurable values for step size and how much to expand the window when
@@ -72,42 +70,33 @@ void set_thresholds(unsigned long cpu)
 
 void TAUupdate(int cpu)
 {
-	unsigned thrm;
-
-#ifdef DEBUG
-	printk("TAUupdate ");
-#endif
+	u32 thrm;
+	u32 bits = THRM1_TIV | THRM1_TIN | THRM1_V;
 
 	/* if both thresholds are crossed, the step_sizes cancel out
 	 * and the window winds up getting expanded twice. */
-	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed low threshold */
-			if (tau[cpu].low >= step_size){
-				tau[cpu].low -= step_size;
-				tau[cpu].high -= (step_size - window_expand);
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("low threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM1);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM1, 0);
+
+		if (tau[cpu].low >= step_size) {
+			tau[cpu].low -= step_size;
+			tau[cpu].high -= (step_size - window_expand);
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: low threshold crossed\n", __func__);
 	}
-	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed high threshold */
-			if (tau[cpu].high <= 127-step_size){
-				tau[cpu].low += (step_size - window_expand);
-				tau[cpu].high += step_size;
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("high threshold crossed ");
-#endif
+	thrm = mfspr(SPRN_THRM2);
+	if ((thrm & bits) == bits) {
+		mtspr(SPRN_THRM2, 0);
+
+		if (tau[cpu].high <= 127 - step_size) {
+			tau[cpu].low += (step_size - window_expand);
+			tau[cpu].high += step_size;
 		}
+		tau[cpu].grew = 1;
+		pr_debug("%s: high threshold crossed\n", __func__);
 	}
-
-#ifdef DEBUG
-	printk("grew = %d\n", tau[cpu].grew);
-#endif
 }
 
 #ifdef CONFIG_TAU_INT
@@ -132,18 +121,18 @@ void TAUException(struct pt_regs * regs)
 static void tau_timeout(void * info)
 {
 	int cpu;
-	unsigned long flags;
 	int size;
 	int shrink;
 
-	/* disabling interrupts *should* be okay */
-	local_irq_save(flags);
 	cpu = smp_processor_id();
 
 #ifndef CONFIG_TAU_INT
 	TAUupdate(cpu);
 #endif
 
+	/* Stop thermal sensor comparisons and interrupts */
+	mtspr(SPRN_THRM3, 0);
+
 	size = tau[cpu].high - tau[cpu].low;
 	if (size > min_window && ! tau[cpu].grew) {
 		/* do an exponential shrink of half the amount currently over size */
@@ -165,18 +154,12 @@ static void tau_timeout(void * info)
 
 	set_thresholds(cpu);
 
-	/*
-	 * Do the enable every time, since otherwise a bunch of (relatively)
-	 * complex sleep code needs to be added. One mtspr every time
-	 * tau_timeout is called is probably not a big deal.
-	 *
+	/* Restart thermal sensor comparisons and interrupts.
 	 * The "PowerPC 740 and PowerPC 750 Microprocessor Datasheet"
 	 * recommends that "the maximum value be set in THRM3 under all
 	 * conditions."
 	 */
 	mtspr(SPRN_THRM3, THRM3_SITV(0x1fff) | THRM3_E);
-
-	local_irq_restore(flags);
 }
 
 static void tau_timeout_smp(unsigned long unused)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index d5e34ce5fd5d9..e06ccba351330 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -243,7 +243,7 @@ config TAU
 	  temp is actually what /proc/cpuinfo says it is.
 
 config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
+	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
 	depends on TAU
 	---help---
 	  The TAU supports an interrupt driven mode which causes an interrupt
@@ -251,12 +251,7 @@ config TAU_INT
 	  to get notified the temp has exceeded a range. With this option off,
 	  a timer is used to re-check the temperature periodically.
 
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
+	  If in doubt, say N here.
 
 config TAU_AVERAGE
 	bool "Average high and low temp"
-- 
2.25.1

[PATCH 4.14 098/191] perf intel-pt: Fix "context_switch event has no tid" error

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 7d537a8d2e76bc4fc71e34545ceaa463ac2cd928 ]

A context_switch event can have no tid because pids can be detached from
a task while the task is still running (in do_exit()). Note this won't
happen with per-task contexts because then tracing stops at
perf_event_exit_task()

If a task with no tid gets preempted, or a dying task gets preempted and
its parent releases it, when it subsequently gets switched back in,
Intel PT will not be able to determine what task is running and prints
an error "context_switch event has no tid". However, it is not really an
error because the task is in kernel space and the decoder can continue
to decode successfully. Fix by changing the error to be only a logged
message, and make allowance for tid == -1.

Example:

  Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g.
  $ uname -r
  5.9.0-rc4
  $ grep PREEMPT .config
  # CONFIG_PREEMPT_NONE is not set
  # CONFIG_PREEMPT_VOLUNTARY is not set
  CONFIG_PREEMPT=y
  CONFIG_PREEMPT_COUNT=y
  CONFIG_PREEMPTION=y
  CONFIG_PREEMPT_RCU=y
  CONFIG_PREEMPT_NOTIFIERS=y
  CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
  CONFIG_DEBUG_PREEMPT=y
  # CONFIG_PREEMPT_TRACER is not set
  # CONFIG_PREEMPTIRQ_DELAY_TEST is not set

Before:

  $ cat forkit.c

  #include <sys/types.h>
  #include <unistd.h>
  #include <sys/wait.h>

  int main()
  {
          pid_t child;
          int status = 0;

          child = fork();
          if (child == 0)
                  return 123;
          wait(&status);
          return 0;
  }

  $ gcc -o forkit forkit.c
  $ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k &
  [1] 11016
  $ taskset 2 ./forkit
  $ sudo pkill perf
  $ [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 17.262 MB perf.data ]

  [1]+  Terminated              sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k
  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
  context_switch event has no tid
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)

After:

  $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit
           taskset 11019 [001] 66663.270045029:          1 instructions:k:  ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms])
           taskset 11019 [001] 66663.270201816:          1 instructions:k:  ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019
            forkit 11019 [001] 66663.270420028:          1 instructions:k:  ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270648704:          1 instructions:k:  ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms])
            forkit 11019 [001] 66663.270833163:          1 instructions:k:  ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271092359:          1 instructions:k:  ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms])
            forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019)
            forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid: 11020/11020
            forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
            forkit 11020 [001] 66663.271312066:          1 instructions:k:  ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms])
            forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019)
            forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt  next pid/tid: 11019/11019
            forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11020/11020
            forkit 11019 [001] 66663.271517241:          1 instructions:k:  ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms])
            forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386)
            forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT          next pid/tid:    -1/-1
               :-1    -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN           prev pid/tid: 11019/11019
                :-1    -1 [001] 66663.271707466:          1 instructions:k:  ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms])

Fixes: 86c2786994bd7c ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lore.kernel.org/lkml/20200909084923.9096-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/intel-pt.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/perf/util/intel-pt.c b/tools/perf/util/intel-pt.c
index e8e05e7838b26..66591e8e26470 100644
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -906,6 +906,8 @@ static void intel_pt_set_pid_tid_cpu(struct intel_pt *pt,
 
 	if (queue->tid == -1 || pt->have_sched_switch) {
 		ptq->tid = machine__get_current_tid(pt->machine, ptq->cpu);
+		if (ptq->tid == -1)
+			ptq->pid = -1;
 		thread__zput(ptq->thread);
 	}
 
@@ -1948,10 +1950,8 @@ static int intel_pt_context_switch(struct intel_pt *pt, union perf_event *event,
 		tid = sample->tid;
 	}
 
-	if (tid == -1) {
-		pr_err("context_switch event has no tid\n");
-		return -EINVAL;
-	}
+	if (tid == -1)
+		intel_pt_log("context_switch event has no tid\n");
 
 	intel_pt_log("context_switch: cpu %d pid %d tid %d time %"PRIu64" tsc %#"PRIx64"\n",
 		     cpu, pid, tid, sample->time, perf_time_to_tsc(sample->time,
-- 
2.25.1

[PATCH 4.14 099/191] RDMA/hns: Set the unsupported wr opcode

[Greg Kroah-Hartman]

From: Lijun Ou <oulijun@huawei.com>

[ Upstream commit 22d3e1ed2cc837af87f76c3c8a4ccf4455e225c5 ]

hip06 does not support IB_WR_LOCAL_INV, so the ps_opcode should be set to
an invalid value instead of being left uninitialized.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Fixes: a2f3d4479fe9 ("RDMA/hns: Avoid unncessary initialization")
Link: https://lore.kernel.org/r/1600350615-115217-1-git-send-email-oulijun@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
index 8208c30f03c5a..bdfef9abe8f33 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -243,7 +243,6 @@ int hns_roce_v1_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 				ps_opcode = HNS_ROCE_WQE_OPCODE_SEND;
 				break;
 			case IB_WR_LOCAL_INV:
-				break;
 			case IB_WR_ATOMIC_CMP_AND_SWP:
 			case IB_WR_ATOMIC_FETCH_AND_ADD:
 			case IB_WR_LSO:
-- 
2.25.1

[PATCH 4.14 100/191] kdb: Fix pager search for multi-line strings

[Greg Kroah-Hartman]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit d081a6e353168f15e63eb9e9334757f20343319f ]

Currently using forward search doesn't handle multi-line strings correctly.
The search routine replaces line breaks with \0 during the search and, for
regular searches ("help | grep Common\n"), there is code after the line
has been discarded or printed to replace the break character.

However during a pager search ("help\n" followed by "/Common\n") when the
string is matched we will immediately return to normal output and the code
that should restore the \n becomes unreachable. Fix this by restoring the
replaced character when we disable the search mode and update the comment
accordingly.

Fixes: fb6daa7520f9d ("kdb: Provide forward search at more prompt")
Link: https://lore.kernel.org/r/20200909141708.338273-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/debug/kdb/kdb_io.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 6a4b41484afe6..b45576ca3b0da 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -679,12 +679,16 @@ int vkdb_printf(enum kdb_msgsrc src, const char *fmt, va_list ap)
 			size_avail = sizeof(kdb_buffer) - len;
 			goto kdb_print_out;
 		}
-		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH)
+		if (kdb_grepping_flag >= KDB_GREPPING_FLAG_SEARCH) {
 			/*
 			 * This was a interactive search (using '/' at more
-			 * prompt) and it has completed. Clear the flag.
+			 * prompt) and it has completed. Replace the \0 with
+			 * its original value to ensure multi-line strings
+			 * are handled properly, and return to normal mode.
 			 */
+			*cphold = replaced_byte;
 			kdb_grepping_flag = 0;
+		}
 		/*
 		 * at this point the string is a full line and
 		 * should be printed, up to the null.
-- 
2.25.1

[PATCH 4.14 101/191] overflow: Include header file with SIZE_MAX declaration

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit a4947e84f23474803b62a2759b5808147e4e15f9 ]

The various array_size functions use SIZE_MAX define, but missed limits.h
causes to failure to compile code that needs overflow.h.

 In file included from drivers/infiniband/core/uverbs_std_types_device.c:6:
 ./include/linux/overflow.h: In function 'array_size':
 ./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function)
   258 |   return SIZE_MAX;
       |          ^~~~~~~~

Fixes: 610b15c50e86 ("overflow.h: Add allocation size calculation helpers")
Link: https://lore.kernel.org/r/20200913102928.134985-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/overflow.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/overflow.h b/include/linux/overflow.h
index 40b48e2133cb8..38a47cc62cf3a 100644
--- a/include/linux/overflow.h
+++ b/include/linux/overflow.h
@@ -3,6 +3,7 @@
 #define __LINUX_OVERFLOW_H
 
 #include <linux/compiler.h>
+#include <linux/limits.h>
 
 /*
  * In the fallback code below, we need to compute the minimum and
-- 
2.25.1

[PATCH 4.14 102/191] powerpc/perf: Exclude pmc5/6 from the irrelevant PMU group constraints

[Greg Kroah-Hartman]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit 3b6c3adbb2fa42749c3d38cfc4d4d0b7e096bb7b ]

PMU counter support functions enforces event constraints for group of
events to check if all events in a group can be monitored. Incase of
event codes using PMC5 and PMC6 ( 500fa and 600f4 respectively ), not
all constraints are applicable, say the threshold or sample bits. But
current code includes pmc5 and pmc6 in some group constraints (like
IC_DC Qualifier bits) which is actually not applicable and hence
results in those events not getting counted when scheduled along with
group of other events. Patch fixes this by excluding PMC5/6 from
constraints which are not relevant for it.

Fixes: 7ffd948 ("powerpc/perf: factor out power8 pmu functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1600672204-1610-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/isa207-common.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 7ecea7143e587..dd9f88fed63ce 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -275,6 +275,15 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 
 		mask  |= CNST_PMC_MASK(pmc);
 		value |= CNST_PMC_VAL(pmc);
+
+		/*
+		 * PMC5 and PMC6 are used to count cycles and instructions and
+		 * they do not support most of the constraint bits. Add a check
+		 * to exclude PMC5/6 from most of the constraints except for
+		 * EBB/BHRB.
+		 */
+		if (pmc >= 5)
+			goto ebb_bhrb;
 	}
 
 	if (pmc <= 4) {
@@ -333,6 +342,7 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp)
 		}
 	}
 
+ebb_bhrb:
 	if (!pmc && ebb)
 		/* EBB events must specify the PMC */
 		return -1;
-- 
2.25.1

[PATCH 4.14 103/191] powerpc/perf/hv-gpci: Fix starting index value

[Greg Kroah-Hartman]

From: Kajol Jain <kjain@linux.ibm.com>

[ Upstream commit 0f9866f7e85765bbda86666df56c92f377c3bc10 ]

Commit 9e9f60108423f ("powerpc/perf/{hv-gpci, hv-common}: generate
requests with counters annotated") adds a framework for defining
gpci counters.
In this patch, they adds starting_index value as '0xffffffffffffffff'.
which is wrong as starting_index is of size 32 bits.

Because of this, incase we try to run hv-gpci event we get error.

In power9 machine:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
          -C 0 -I 1000
event syntax error: '..bie_count_and_time_tlbie_instructions_issued/'
                                  \___ value too big for format, maximum is 4294967295

This patch fix this issue and changes starting_index value to '0xffffffff'

After this patch:

command#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/ -C 0 -I 1000
     1.000085786              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.000287818              1,024      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
     2.439113909             17,408      hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/

Fixes: 9e9f60108423 ("powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201003074943.338618-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/hv-gpci-requests.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/perf/hv-gpci-requests.h b/arch/powerpc/perf/hv-gpci-requests.h
index e608f9db12ddc..8965b4463d433 100644
--- a/arch/powerpc/perf/hv-gpci-requests.h
+++ b/arch/powerpc/perf/hv-gpci-requests.h
@@ -95,7 +95,7 @@ REQUEST(__field(0,	8,	partition_id)
 
 #define REQUEST_NAME system_performance_capabilities
 #define REQUEST_NUM 0x40
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__field(0,	1,	perf_collect_privileged)
 	__field(0x1,	1,	capability_mask)
@@ -223,7 +223,7 @@ REQUEST(__field(0,	2, partition_id)
 
 #define REQUEST_NAME system_hypervisor_times
 #define REQUEST_NUM 0xF0
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 	__count(0x8,	8,	time_spent_processing_virtual_processor_timers)
@@ -234,7 +234,7 @@ REQUEST(__count(0,	8,	time_spent_to_dispatch_virtual_processors)
 
 #define REQUEST_NAME system_tlbie_count_and_time
 #define REQUEST_NUM 0xF4
-#define REQUEST_IDX_KIND "starting_index=0xffffffffffffffff"
+#define REQUEST_IDX_KIND "starting_index=0xffffffff"
 #include I(REQUEST_BEGIN)
 REQUEST(__count(0,	8,	tlbie_instructions_issued)
 	/*
-- 
2.25.1

[PATCH 4.14 104/191] cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier

[Greg Kroah-Hartman]

From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

[ Upstream commit a2d0230b91f7e23ceb5d8fb6a9799f30517ec33a ]

The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_reboot_notifier':

  drivers/cpufreq/powernv-cpufreq.c: In function powernv_cpufreq_reboot_notifier:
  drivers/cpufreq/powernv-cpufreq.c:906:1: error: the frame size of 2064 bytes is larger than 2048 bytes

Fixes: cf30af76 ("cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200922080254.41497-1-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/powernv-cpufreq.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index dc81fc2bf8015..56c3d86e5b9de 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -846,12 +846,15 @@ static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
 				unsigned long action, void *unused)
 {
 	int cpu;
-	struct cpufreq_policy cpu_policy;
+	struct cpufreq_policy *cpu_policy;
 
 	rebooting = true;
 	for_each_online_cpu(cpu) {
-		cpufreq_get_policy(&cpu_policy, cpu);
-		powernv_cpufreq_target_index(&cpu_policy, get_nominal_index());
+		cpu_policy = cpufreq_cpu_get(cpu);
+		if (!cpu_policy)
+			continue;
+		powernv_cpufreq_target_index(cpu_policy, get_nominal_index());
+		cpufreq_cpu_put(cpu_policy);
 	}
 
 	return NOTIFY_DONE;
-- 
2.25.1

[PATCH 4.14 105/191] IB/rdmavt: Fix sizeof mismatch

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 8e71f694e0c819db39af2336f16eb9689f1ae53f ]

An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it
should be struct rvt_ibport *. Note that since ** is the same size as
* this is not causing any issues.  Improve this fix by using
sizeof(*rdi->ports) as this allows us to not even reference the type
of the pointer.  Also remove line breaks as the entire statement can
fit on one line.

Link: https://lore.kernel.org/r/20201008095204.82683-1-colin.king@canonical.com
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: ff6acd69518e ("IB/rdmavt: Add device structure allocation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rdmavt/vt.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/infiniband/sw/rdmavt/vt.c b/drivers/infiniband/sw/rdmavt/vt.c
index 64bdd442078a1..03a367db38e6d 100644
--- a/drivers/infiniband/sw/rdmavt/vt.c
+++ b/drivers/infiniband/sw/rdmavt/vt.c
@@ -97,9 +97,7 @@ struct rvt_dev_info *rvt_alloc_device(size_t size, int nports)
 	if (!rdi)
 		return rdi;
 
-	rdi->ports = kcalloc(nports,
-			     sizeof(struct rvt_ibport **),
-			     GFP_KERNEL);
+	rdi->ports = kcalloc(nports, sizeof(*rdi->ports), GFP_KERNEL);
 	if (!rdi->ports)
 		ib_dealloc_device(&rdi->ibdev);
 
-- 
2.25.1

[PATCH 4.14 106/191] f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info

[Greg Kroah-Hartman]

From: Jamie Iles <jamie@nuviainc.com>

[ Upstream commit ae284d87abade58c8db7760c808f311ef1ce693c ]

syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, unmounting an
f2fs filesystem could result in the following splat:

  kobject: 'loop5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 250)
  kobject: 'f2fs_xattr_entry-7:5' ((____ptrval____)): kobject_release, parent 0000000000000000 (delayed 750)
  ------------[ cut here ]------------
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98
  WARNING: CPU: 0 PID: 699 at lib/debugobjects.c:485 debug_print_object+0x180/0x240
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 0 PID: 699 Comm: syz-executor.5 Tainted: G S                5.9.0-rc8+ #101
  Hardware name: linux,dummy-virt (DT)
  Call trace:
   dump_backtrace+0x0/0x4d8
   show_stack+0x34/0x48
   dump_stack+0x174/0x1f8
   panic+0x360/0x7a0
   __warn+0x244/0x2ec
   report_bug+0x240/0x398
   bug_handler+0x50/0xc0
   call_break_hook+0x160/0x1d8
   brk_handler+0x30/0xc0
   do_debug_exception+0x184/0x340
   el1_dbg+0x48/0xb0
   el1_sync_handler+0x170/0x1c8
   el1_sync+0x80/0x100
   debug_print_object+0x180/0x240
   debug_check_no_obj_freed+0x200/0x430
   slab_free_freelist_hook+0x190/0x210
   kfree+0x13c/0x460
   f2fs_put_super+0x624/0xa58
   generic_shutdown_super+0x120/0x300
   kill_block_super+0x94/0xf8
   kill_f2fs_super+0x244/0x308
   deactivate_locked_super+0x104/0x150
   deactivate_super+0x118/0x148
   cleanup_mnt+0x27c/0x3c0
   __cleanup_mnt+0x28/0x38
   task_work_run+0x10c/0x248
   do_notify_resume+0x9d4/0x1188
   work_pending+0x8/0x34c

Like the error handling for f2fs_register_sysfs(), we need to wait for
the kobject to be destroyed before returning to prevent a potential
use-after-free.

Fixes: bf9e697ecd42 ("f2fs: expose features to sysfs entry")
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/sysfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index a55919eec0351..6a13099b3c823 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -563,4 +563,5 @@ void f2fs_unregister_sysfs(struct f2fs_sb_info *sbi)
 	}
 	kobject_del(&sbi->s_kobj);
 	kobject_put(&sbi->s_kobj);
+	wait_for_completion(&sbi->s_kobj_unregister);
 }
-- 
2.25.1

[PATCH 4.14 107/191] lib/crc32.c: fix trivial typo in preprocessor condition

[Greg Kroah-Hartman]

From: Tobias Jordan <kernel@cdqe.de>

[ Upstream commit 904542dc56524f921a6bab0639ff6249c01e775f ]

Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS.
Obviously, the _be function should be governed by the _BE_ define.

This probably never pops up as it's hard to come up with a configuration
where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using
bitwise CRC anyway.

Fixes: 46c5801eaf86 ("crc32: bolt on crc32c")
Signed-off-by: Tobias Jordan <kernel@cdqe.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lkml.kernel.org/r/20200923182122.GA3338@agrajag.zerfleddert.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/crc32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/crc32.c b/lib/crc32.c
index 6ddc92bc14609..a1ccb4a8a9950 100644
--- a/lib/crc32.c
+++ b/lib/crc32.c
@@ -327,7 +327,7 @@ static inline u32 __pure crc32_be_generic(u32 crc, unsigned char const *p,
 	return crc;
 }
 
-#if CRC_LE_BITS == 1
+#if CRC_BE_BITS == 1
 u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len)
 {
 	return crc32_be_generic(crc, p, len, NULL, CRCPOLY_BE);
-- 
2.25.1

[PATCH 4.14 108/191] ramfs: fix nommu mmap with gaps in the page cache

[Greg Kroah-Hartman]

From: Matthew Wilcox (Oracle) <willy@infradead.org>

[ Upstream commit 50b7d85680086126d7bd91dae81d57d4cb1ab6b7 ]

ramfs needs to check that pages are both physically contiguous and
contiguous in the file.  If the page cache happens to have, eg, page A for
index 0 of the file, no page for index 1, and page A+1 for index 2, then
an mmap of the first two pages of the file will succeed when it should
fail.

Fixes: 642fb4d1f1dd ("[PATCH] NOMMU: Provide shared-writable mmap support on ramfs")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Howells <dhowells@redhat.com>
Link: https://lkml.kernel.org/r/20200914122239.GO6583@casper.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ramfs/file-nommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 3ac1f23870837..5e1ebbe639ebf 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -228,7 +228,7 @@ static unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
 	if (!pages)
 		goto out_free;
 
-	nr = find_get_pages(inode->i_mapping, &pgoff, lpages, pages);
+	nr = find_get_pages_contig(inode->i_mapping, pgoff, lpages, pages);
 	if (nr != lpages)
 		goto out_free_pages; /* leave if some pages were missing */
 
-- 
2.25.1

[PATCH 4.14 109/191] rapidio: fix error handling path

[Greg Kroah-Hartman]

From: Souptick Joarder <jrdr.linux@gmail.com>

[ Upstream commit fa63f083b3492b5ed5332b8d7c90b03b5ef24a1d ]

rio_dma_transfer() attempts to clamp the return value of
pin_user_pages_fast() to be >= 0.  However, the attempt fails because
nr_pages is overridden a few lines later, and restored to the undesirable
-ERRNO value.

The return value is ultimately stored in nr_pages, which in turn is passed
to unpin_user_pages(), which expects nr_pages >= 0, else, disaster.

Fix this by fixing the nesting of the assignment to nr_pages: nr_pages
should be clamped to zero if pin_user_pages_fast() returns -ERRNO, or set
to the return value of pin_user_pages_fast(), otherwise.

[jhubbard@nvidia.com: new changelog]

Fixes: e8de370188d09 ("rapidio: add mport char device driver")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lkml.kernel.org/r/1600227737-20785-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rapidio/devices/rio_mport_cdev.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index f207f8725993c..171d6bcad5bc5 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -900,15 +900,16 @@ rio_dma_transfer(struct file *filp, u32 transfer_mode,
 				rmcd_error("get_user_pages_unlocked err=%ld",
 					   pinned);
 				nr_pages = 0;
-			} else
+			} else {
 				rmcd_error("pinned %ld out of %ld pages",
 					   pinned, nr_pages);
+				/*
+				 * Set nr_pages up to mean "how many pages to unpin, in
+				 * the error handler:
+				 */
+				nr_pages = pinned;
+			}
 			ret = -EFAULT;
-			/*
-			 * Set nr_pages up to mean "how many pages to unpin, in
-			 * the error handler:
-			 */
-			nr_pages = pinned;
 			goto err_pg;
 		}
 
-- 
2.25.1

[PATCH 4.14 110/191] rapidio: fix the missed put_device() for rio_mport_add_riodev

[Greg Kroah-Hartman]

From: Jing Xiangfeng <jingxiangfeng@huawei.com>

[ Upstream commit 85094c05eeb47d195a74a25366a2db066f1c9d47 ]

rio_mport_add_riodev() misses to call put_device() when the device already
exists.  Add the missed function call to fix it.

Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lkml.kernel.org/r/20200922072525.42330-1-jingxiangfeng@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rapidio/devices/rio_mport_cdev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index 171d6bcad5bc5..a87c024d56700 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -1739,6 +1739,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 	struct rio_dev *rdev;
 	struct rio_switch *rswitch = NULL;
 	struct rio_mport *mport;
+	struct device *dev;
 	size_t size;
 	u32 rval;
 	u32 swpinfo = 0;
@@ -1753,8 +1754,10 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 	rmcd_debug(RDEV, "name:%s ct:0x%x did:0x%x hc:0x%x", dev_info.name,
 		   dev_info.comptag, dev_info.destid, dev_info.hopcount);
 
-	if (bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name)) {
+	dev = bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name);
+	if (dev) {
 		rmcd_debug(RDEV, "device %s already exists", dev_info.name);
+		put_device(dev);
 		return -EEXIST;
 	}
 
-- 
2.25.1

[PATCH 4.14 111/191] mailbox: avoid timer start from callback

[Greg Kroah-Hartman]

From: Jassi Brar <jaswinder.singh@linaro.org>

[ Upstream commit c7dacf5b0f32957b24ef29df1207dc2cd8307743 ]

If the txdone is done by polling, it is possible for msg_submit() to start
the timer while txdone_hrtimer() callback is running. If the timer needs
recheduling, it could already be enqueued by the time hrtimer_forward_now()
is called, leading hrtimer to loudly complain.

WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110
CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5
Hardware name: Libre Computer AML-S805X-AC (DT)
Workqueue: events_freezable_power_ thermal_zone_device_check
pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
pc : hrtimer_forward+0xc4/0x110
lr : txdone_hrtimer+0xf8/0x118
[...]

This can be fixed by not starting the timer from the callback path. Which
requires the timer reloading as long as any message is queued on the
channel, and not just when current tx is not done yet.

Fixes: 0cc67945ea59 ("mailbox: switch to hrtimer for tx_complete polling")
Reported-by: Da Xue <da@libre.computer>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mailbox/mailbox.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c
index 055c90b8253cb..10a559cfb7ea3 100644
--- a/drivers/mailbox/mailbox.c
+++ b/drivers/mailbox/mailbox.c
@@ -85,9 +85,12 @@ static void msg_submit(struct mbox_chan *chan)
 exit:
 	spin_unlock_irqrestore(&chan->lock, flags);
 
-	if (!err && (chan->txdone_method & TXDONE_BY_POLL))
-		/* kick start the timer immediately to avoid delays */
-		hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	/* kick start the timer immediately to avoid delays */
+	if (!err && (chan->txdone_method & TXDONE_BY_POLL)) {
+		/* but only if not already active */
+		if (!hrtimer_active(&chan->mbox->poll_hrt))
+			hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	}
 }
 
 static void tx_tick(struct mbox_chan *chan, int r)
@@ -125,11 +128,10 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
 		struct mbox_chan *chan = &mbox->chans[i];
 
 		if (chan->active_req && chan->cl) {
+			resched = true;
 			txdone = chan->mbox->ops->last_tx_done(chan);
 			if (txdone)
 				tx_tick(chan, 0);
-			else
-				resched = true;
 		}
 	}
 
-- 
2.25.1

[PATCH 4.14 112/191] i2c: rcar: Auto select RESET_CONTROLLER

[Greg Kroah-Hartman]

From: Dirk Behme <dirk.behme@de.bosch.com>

[ Upstream commit 5b9bacf28a973a6b16510493416baeefa2c06289 ]

The i2c-rcar driver utilizes the Generic Reset Controller kernel
feature, so select the RESET_CONTROLLER option when the I2C_RCAR
option is selected with a Gen3 SoC.

Fixes: 2b16fd63059ab9 ("i2c: rcar: handle RXDMA HW behaviour on Gen3")
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Andy Lowe <andy_lowe@mentor.com>
[erosca: Add "if ARCH_RCAR_GEN3" per Wolfram's request]
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b72a25585d52b..c457f65136f83 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1095,6 +1095,7 @@ config I2C_RCAR
 	depends on HAS_DMA
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select I2C_SLAVE
+	select RESET_CONTROLLER if ARCH_RCAR_GEN3
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
-- 
2.25.1

[PATCH 4.14 113/191] PCI: iproc: Set affinity mask on MSI interrupts

[Greg Kroah-Hartman]

From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>

[ Upstream commit eb7eacaa5b9e4f665bd08d416c8f88e63d2f123c ]

The core interrupt code expects the irq_set_affinity call to update the
effective affinity for the interrupt. This was not being done, so update
iproc_msi_irq_set_affinity() to do so.

Link: https://lore.kernel.org/r/20200803035241.7737-1-mark.tomlinson@alliedtelesis.co.nz
Fixes: 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pcie-iproc-msi.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/host/pcie-iproc-msi.c b/drivers/pci/host/pcie-iproc-msi.c
index 2d0f535a2f69a..7e6f7b8504d2f 100644
--- a/drivers/pci/host/pcie-iproc-msi.c
+++ b/drivers/pci/host/pcie-iproc-msi.c
@@ -217,15 +217,20 @@ static int iproc_msi_irq_set_affinity(struct irq_data *data,
 	struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
 	int target_cpu = cpumask_first(mask);
 	int curr_cpu;
+	int ret;
 
 	curr_cpu = hwirq_to_cpu(msi, data->hwirq);
 	if (curr_cpu == target_cpu)
-		return IRQ_SET_MASK_OK_DONE;
+		ret = IRQ_SET_MASK_OK_DONE;
+	else {
+		/* steer MSI to the target CPU */
+		data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+		ret = IRQ_SET_MASK_OK;
+	}
 
-	/* steer MSI to the target CPU */
-	data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
+	irq_data_update_effective_affinity(data, cpumask_of(target_cpu));
 
-	return IRQ_SET_MASK_OK;
+	return ret;
 }
 
 static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
-- 
2.25.1

[PATCH 4.14 114/191] clk: at91: clk-main: update key before writing AT91_CKGR_MOR

[Greg Kroah-Hartman]

From: Claudiu Beznea <claudiu.beznea@microchip.com>

[ Upstream commit 85d071e7f19a6a9abf30476b90b3819642568756 ]

SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator
Main Oscillator Register) that writing any value other than
0x37 on KEY field aborts the write operation. Use the key when
selecting main clock parent.

Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1598338751-20607-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-main.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 90988e7a5b47f..2e7da9b379d48 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -517,12 +517,17 @@ static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index)
 		return -EINVAL;
 
 	regmap_read(regmap, AT91_CKGR_MOR, &tmp);
-	tmp &= ~MOR_KEY_MASK;
 
 	if (index && !(tmp & AT91_PMC_MOSCSEL))
-		regmap_write(regmap, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL);
+		tmp = AT91_PMC_MOSCSEL;
 	else if (!index && (tmp & AT91_PMC_MOSCSEL))
-		regmap_write(regmap, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL);
+		tmp = 0;
+	else
+		return 0;
+
+	regmap_update_bits(regmap, AT91_CKGR_MOR,
+			   AT91_PMC_MOSCSEL | MOR_KEY_MASK,
+			   tmp | AT91_PMC_KEY);
 
 	while (!clk_sam9x5_main_ready(regmap))
 		cpu_relax();
-- 
2.25.1

[PATCH 4.14 115/191] clk: bcm2835: add missing release if devm_clk_hw_register fails

[Greg Kroah-Hartman]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit f6c992ca7dd4f49042eec61f3fb426c94d901675 ]

In the implementation of bcm2835_register_pll(), the allocated pll is
leaked if devm_clk_hw_register() fails to register hw. Release pll if
devm_clk_hw_register() fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/bcm/clk-bcm2835.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 6db4204e5d5d5..98295b9703178 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1354,8 +1354,10 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 	pll->hw.init = &init;
 
 	ret = devm_clk_hw_register(cprman->dev, &pll->hw);
-	if (ret)
+	if (ret) {
+		kfree(pll);
 		return NULL;
+	}
 	return &pll->hw;
 }
 
-- 
2.25.1

[PATCH 4.14 116/191] ext4: limit entries returned when counting fsmap records

[Greg Kroah-Hartman]

From: Darrick J. Wong <darrick.wong@oracle.com>

[ Upstream commit af8c53c8bc087459b1aadd4c94805d8272358d79 ]

If userspace asked fsmap to try to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.

Fixes: 0c9ec4beecac ("ext4: support GETFSMAP ioctls")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201001222148.GA49520@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/fsmap.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext4/fsmap.c b/fs/ext4/fsmap.c
index 7ec3408985980..1a4d42a1b161d 100644
--- a/fs/ext4/fsmap.c
+++ b/fs/ext4/fsmap.c
@@ -121,6 +121,9 @@ static int ext4_getfsmap_helper(struct super_block *sb,
 
 	/* Are we just counting mappings? */
 	if (info->gfi_head->fmh_count == 0) {
+		if (info->gfi_head->fmh_entries == UINT_MAX)
+			return EXT4_QUERY_RANGE_ABORT;
+
 		if (rec_fsblk > info->gfi_next_fsblk)
 			info->gfi_head->fmh_entries++;
 
-- 
2.25.1

[PATCH 4.14 117/191] vfio/pci: Clear token on bypass registration failure

[Greg Kroah-Hartman]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 852b1beecb6ff9326f7ca4bc0fe69ae860ebdb9e ]

The eventfd context is used as our irqbypass token, therefore if an
eventfd is re-used, our token is the same.  The irqbypass code will
return an -EBUSY in this case, but we'll still attempt to unregister
the producer, where if that duplicate token still exists, results in
removing the wrong object.  Clear the token of failed producers so
that they harmlessly fall out when unregistered.

Fixes: 6d7425f109d2 ("vfio: Register/unregister irq_bypass_producer")
Reported-by: guomin chen <guomin_chen@sina.com>
Tested-by: guomin chen <guomin_chen@sina.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci_intrs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index bdfdd506bc588..c989f777bf771 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -355,11 +355,13 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
 	vdev->ctx[vector].producer.token = trigger;
 	vdev->ctx[vector].producer.irq = irq;
 	ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
-	if (unlikely(ret))
+	if (unlikely(ret)) {
 		dev_info(&pdev->dev,
 		"irq bypass producer (token %p) registration fails: %d\n",
 		vdev->ctx[vector].producer.token, ret);
 
+		vdev->ctx[vector].producer.token = NULL;
+	}
 	vdev->ctx[vector].trigger = trigger;
 
 	return 0;
-- 
2.25.1

[PATCH 4.14 118/191] vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pages

[Greg Kroah-Hartman]

From: Xiaoyang Xu <xuxiaoyang2@huawei.com>

[ Upstream commit 2e6cfd496f5b57034cf2aec738799571b5a52124 ]

pfn is not added to pfn_list when vfio_add_to_pfn_list fails.
vfio_unpin_page_external will exit directly without calling
vfio_iova_put_vfio_pfn.  This will lead to a memory leak.

Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Xiaoyang Xu <xuxiaoyang2@huawei.com>
[aw: simplified logic, add Fixes]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_type1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index 9c8ed9d7f9aa5..bfbe5236239bd 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -629,7 +629,8 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
 
 		ret = vfio_add_to_pfn_list(dma, iova, phys_pfn[i]);
 		if (ret) {
-			vfio_unpin_page_external(dma, iova, do_accounting);
+			if (put_pfn(phys_pfn[i], dma->prot) && do_accounting)
+				vfio_lock_acct(dma, -1, true);
 			goto pin_unwind;
 		}
 	}
-- 
2.25.1

[PATCH 4.14 119/191] Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ]

If imx6ul_tsc_init() fails then we need to clean up the clocks.

I reversed the "if (input_dev->users) {" condition to make the code a
bit simpler.

Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/imx6ul_tsc.c | 27 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c
index ee82a975bfd29..5759c1592a456 100644
--- a/drivers/input/touchscreen/imx6ul_tsc.c
+++ b/drivers/input/touchscreen/imx6ul_tsc.c
@@ -542,20 +542,25 @@ static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
 
 	mutex_lock(&input_dev->mutex);
 
-	if (input_dev->users) {
-		retval = clk_prepare_enable(tsc->adc_clk);
-		if (retval)
-			goto out;
-
-		retval = clk_prepare_enable(tsc->tsc_clk);
-		if (retval) {
-			clk_disable_unprepare(tsc->adc_clk);
-			goto out;
-		}
+	if (!input_dev->users)
+		goto out;
 
-		retval = imx6ul_tsc_init(tsc);
+	retval = clk_prepare_enable(tsc->adc_clk);
+	if (retval)
+		goto out;
+
+	retval = clk_prepare_enable(tsc->tsc_clk);
+	if (retval) {
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
 	}
 
+	retval = imx6ul_tsc_init(tsc);
+	if (retval) {
+		clk_disable_unprepare(tsc->tsc_clk);
+		clk_disable_unprepare(tsc->adc_clk);
+		goto out;
+	}
 out:
 	mutex_unlock(&input_dev->mutex);
 	return retval;
-- 
2.25.1

[PATCH 4.14 120/191] Input: stmfts - fix a & vs && typo

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ]

In stmfts_sysfs_hover_enable_write(), we should check value and
sdata->hover_enabled is all true.

Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200916141941.16684-1-yuehaibing@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/stmfts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index c72662c979e79..d9e93dabbca21 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -484,7 +484,7 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
 
 	mutex_lock(&sdata->mutex);
 
-	if (value & sdata->hover_enabled)
+	if (value && sdata->hover_enabled)
 		goto out;
 
 	if (sdata->running)
-- 
2.25.1

[PATCH 4.14 121/191] Input: ep93xx_keypad - fix handling of platform_get_irq() error

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 7d50f6656dacf085a00beeedbc48b19a37d17881 ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828145744.3636-1-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/ep93xx_keypad.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index f77b295e0123e..01788a78041b3 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -257,8 +257,8 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	}
 
 	keypad->irq = platform_get_irq(pdev, 0);
-	if (!keypad->irq) {
-		err = -ENXIO;
+	if (keypad->irq < 0) {
+		err = keypad->irq;
 		goto failed_free;
 	}
 
-- 
2.25.1

[PATCH 4.14 122/191] Input: omap4-keypad - fix handling of platform_get_irq() error

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828145744.3636-2-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/omap4-keypad.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 616fdd94b0694..5480f1a5658ee 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -253,10 +253,8 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (irq < 0)
+		return irq;
 
 	keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
 	if (!keypad_data) {
-- 
2.25.1

[PATCH 4.14 123/191] Input: twl4030_keypad - fix handling of platform_get_irq() error

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit c277e1f0dc3c7d7b5b028e20dd414df241642036 ]

platform_get_irq() returns -ERRNO on error.  In such case casting to
unsigned and comparing to 0 would pass the check.

Fixes: 7abf38d6d13c ("Input: twl4030-keypad - add device tree support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200828145744.3636-3-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/twl4030_keypad.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index f9f98ef1d98e3..8677dbe0fd209 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -63,7 +63,7 @@ struct twl4030_keypad {
 	bool		autorepeat;
 	unsigned int	n_rows;
 	unsigned int	n_cols;
-	unsigned int	irq;
+	int		irq;
 
 	struct device *dbg_dev;
 	struct input_dev *input;
@@ -389,10 +389,8 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 	}
 
 	kp->irq = platform_get_irq(pdev, 0);
-	if (!kp->irq) {
-		dev_err(&pdev->dev, "no keyboard irq assigned\n");
-		return -EINVAL;
-	}
+	if (kp->irq < 0)
+		return kp->irq;
 
 	error = matrix_keypad_build_keymap(keymap_data, NULL,
 					   TWL4030_MAX_ROWS,
-- 
2.25.1

[PATCH 4.14 124/191] Input: sun4i-ps2 - fix handling of platform_get_irq() error

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200828145744.3636-4-krzk@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/sun4i-ps2.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
index 04b96fe393397..46512b4d686a8 100644
--- a/drivers/input/serio/sun4i-ps2.c
+++ b/drivers/input/serio/sun4i-ps2.c
@@ -210,7 +210,6 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	struct sun4i_ps2data *drvdata;
 	struct serio *serio;
 	struct device *dev = &pdev->dev;
-	unsigned int irq;
 	int error;
 
 	drvdata = kzalloc(sizeof(struct sun4i_ps2data), GFP_KERNEL);
@@ -263,14 +262,12 @@ static int sun4i_ps2_probe(struct platform_device *pdev)
 	writel(0, drvdata->reg_base + PS2_REG_GCTL);
 
 	/* Get IRQ for the device */
-	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(dev, "no IRQ found\n");
-		error = -ENXIO;
+	drvdata->irq = platform_get_irq(pdev, 0);
+	if (drvdata->irq < 0) {
+		error = drvdata->irq;
 		goto err_disable_clk;
 	}
 
-	drvdata->irq = irq;
 	drvdata->serio = serio;
 	drvdata->dev = dev;
 
-- 
2.25.1

[PATCH 4.14 125/191] KVM: x86: emulating RDPID failure shall return #UD rather than #GP

[Greg Kroah-Hartman]

From: Robert Hoo <robert.hu@linux.intel.com>

[ Upstream commit a9e2e0ae686094571378c72d8146b5a1a92d0652 ]

Per Intel's SDM, RDPID takes a #UD if it is unsupported, which is more or
less what KVM is emulating when MSR_TSC_AUX is not available.  In fact,
there are no scenarios in which RDPID is supposed to #GP.

Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1598581422-76264-1-git-send-email-robert.hu@linux.intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 4cc8a4a6f1d00..46559812da24e 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3544,7 +3544,7 @@ static int em_rdpid(struct x86_emulate_ctxt *ctxt)
 	u64 tsc_aux = 0;
 
 	if (ctxt->ops->get_msr(ctxt, MSR_TSC_AUX, &tsc_aux))
-		return emulate_gp(ctxt, 0);
+		return emulate_ud(ctxt);
 	ctxt->dst.val = tsc_aux;
 	return X86EMUL_CONTINUE;
 }
-- 
2.25.1

[PATCH 4.14 126/191] memory: omap-gpmc: Fix a couple off by ones

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 4c54228ac8fd55044195825873c50a524131fa53 ]

These comparisons should be >= instead of > to prevent reading one
element beyond the end of the gpmc_cs[] array.

Fixes: cdd6928c589a ("ARM: OMAP2+: Add device-tree support for NOR flash")
Fixes: f37e4580c409 ("ARM: OMAP2: Dynamic allocator for GPMC memory space")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200825104707.GB278587@mwanda
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memory/omap-gpmc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 7059bbda2faca..cc0da96d07cae 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -951,7 +951,7 @@ static int gpmc_cs_remap(int cs, u32 base)
 	int ret;
 	u32 old_base, size;
 
-	if (cs > gpmc_cs_num) {
+	if (cs >= gpmc_cs_num) {
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}
@@ -986,7 +986,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	struct resource *res = &gpmc->mem;
 	int r = -1;
 
-	if (cs > gpmc_cs_num) {
+	if (cs >= gpmc_cs_num) {
 		pr_err("%s: requested chip-select is disabled\n", __func__);
 		return -ENODEV;
 	}
-- 
2.25.1

[PATCH 4.14 127/191] memory: fsl-corenet-cf: Fix handling of platform_get_irq() error

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit dd85345abca60a8916617e8d75c0f9ce334336dd ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: 54afbec0d57f ("memory: Freescale CoreNet Coherency Fabric error reporting driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200827073315.29351-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memory/fsl-corenet-cf.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/memory/fsl-corenet-cf.c b/drivers/memory/fsl-corenet-cf.c
index 662d050243bec..2fbf8d09af36b 100644
--- a/drivers/memory/fsl-corenet-cf.c
+++ b/drivers/memory/fsl-corenet-cf.c
@@ -215,10 +215,8 @@ static int ccf_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, ccf);
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq) {
-		dev_err(&pdev->dev, "%s: no irq\n", __func__);
-		return -ENXIO;
-	}
+	if (irq < 0)
+		return irq;
 
 	ret = devm_request_irq(&pdev->dev, irq, ccf_irq, 0, pdev->name, ccf);
 	if (ret) {
-- 
2.25.1

[PATCH 4.14 128/191] arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 027cca9eb5b450c3f6bb916ba999144c2ec23cb7 ]

The mdss node sets #interrupt-cells = <1>, so its interrupts
should be referenced using a single cell (in this case: only the
interrupt number).

However, right now the mdp/dsi node both have two interrupt cells
set, e.g. interrupts = <4 0>. The 0 is probably meant to say
IRQ_TYPE_NONE (= 0), but with #interrupt-cells = <1> this is
actually interpreted as a second interrupt line.

Remove the IRQ flags from both interrupts to fix this.

Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-5-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 3cc449425a038..02b7a44f790b5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -818,7 +818,7 @@ mdp: mdp@1a01000 {
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>,
 					 <&gcc GCC_MDSS_AXI_CLK>,
@@ -850,7 +850,7 @@ dsi0: dsi@1a98000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
+				interrupts = <4>;
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-- 
2.25.1

[PATCH 4.14 129/191] ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers

[Greg Kroah-Hartman]

From: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

[ Upstream commit 55f6c9931f7c32f19cf221211f099dfd8dab3af9 ]

The PPI interrupts for cortex-a9 were incorrectly specified, fix them.

Fixes: fdfe7f4f9d85 ("ARM: dts: Add Actions Semi S500 and LeMaker Guitar")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/owl-s500.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 51a48741d4c01..2557ce026add2 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -82,21 +82,21 @@ scu: scu@b0020000 {
 		global_timer: timer@b0020200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xb0020200 0x100>;
-			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_timer: timer@b0020600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xb0020600 0x20>;
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_wdt: wdt@b0020620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xb0020620 0xe0>;
-			interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
-- 
2.25.1

[PATCH 4.14 130/191] arm64: dts: zynqmp: Remove additional compatible string for i2c IPs

[Greg Kroah-Hartman]

From: Michal Simek <michal.simek@xilinx.com>

[ Upstream commit 35292518cb0a626fcdcabf739aed75060a018ab5 ]

DT binding permits only one compatible string which was decribed in past by
commit 63cab195bf49 ("i2c: removed work arounds in i2c driver for Zynq
Ultrascale+ MPSoC").
The commit aea37006e183 ("dt-bindings: i2c: cadence: Migrate i2c-cadence
documentation to YAML") has converted binding to yaml and the following
issues is reported:
...: i2c@ff030000: compatible: Additional items are not allowed
('cdns,i2c-r1p10' was unexpected)
	From schema:
.../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds
...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too
long

The commit c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string")
has added the second compatible string but without removing origin one.
The patch is only keeping one compatible string "cdns,i2c-r1p14".

Fixes: c415f9e8304a ("ARM64: zynqmp: Fix i2c node's compatible string")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 7665fbddff280..0531843117f46 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -410,7 +410,7 @@ gpio: gpio@ff0a0000 {
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -420,7 +420,7 @@ i2c0: i2c@ff020000 {
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
-- 
2.25.1

[PATCH 4.14 131/191] powerpc/powernv/dump: Fix race while processing OPAL dump

[Greg Kroah-Hartman]

From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>

[ Upstream commit 0a43ae3e2beb77e3481d812834d33abe270768ab ]

Every dump reported by OPAL is exported to userspace through a sysfs
interface and notified using kobject_uevent(). The userspace daemon
(opal_errd) then reads the dump and acknowledges that the dump is
saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.

However it's possible the userspace daemon may already be scanning
dump entries when a new sysfs dump entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
dump_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash.

This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().

The function create_dump_obj() returns the dump object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_dump_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.

Fixes: c7e64b9ce04a ("powerpc/powernv Platform dump interface")
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201017164210.264619-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-dump.c | 41 +++++++++++++++-------
 1 file changed, 29 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-dump.c b/arch/powerpc/platforms/powernv/opal-dump.c
index 4c827826c05eb..e21e2c0af69d2 100644
--- a/arch/powerpc/platforms/powernv/opal-dump.c
+++ b/arch/powerpc/platforms/powernv/opal-dump.c
@@ -319,15 +319,14 @@ static ssize_t dump_attr_read(struct file *filep, struct kobject *kobj,
 	return count;
 }
 
-static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
-					uint32_t type)
+static void create_dump_obj(uint32_t id, size_t size, uint32_t type)
 {
 	struct dump_obj *dump;
 	int rc;
 
 	dump = kzalloc(sizeof(*dump), GFP_KERNEL);
 	if (!dump)
-		return NULL;
+		return;
 
 	dump->kobj.kset = dump_kset;
 
@@ -347,21 +346,39 @@ static struct dump_obj *create_dump_obj(uint32_t id, size_t size,
 	rc = kobject_add(&dump->kobj, NULL, "0x%x-0x%x", type, id);
 	if (rc) {
 		kobject_put(&dump->kobj);
-		return NULL;
+		return;
 	}
 
+	/*
+	 * As soon as the sysfs file for this dump is created/activated there is
+	 * a chance the opal_errd daemon (or any userspace) might read and
+	 * acknowledge the dump before kobject_uevent() is called. If that
+	 * happens then there is a potential race between
+	 * dump_ack_store->kobject_put() and kobject_uevent() which leads to a
+	 * use-after-free of a kernfs object resulting in a kernel crash.
+	 *
+	 * To avoid that, we need to take a reference on behalf of the bin file,
+	 * so that our reference remains valid while we call kobject_uevent().
+	 * We then drop our reference before exiting the function, leaving the
+	 * bin file to drop the last reference (if it hasn't already).
+	 */
+
+	/* Take a reference for the bin file */
+	kobject_get(&dump->kobj);
 	rc = sysfs_create_bin_file(&dump->kobj, &dump->dump_attr);
-	if (rc) {
+	if (rc == 0) {
+		kobject_uevent(&dump->kobj, KOBJ_ADD);
+
+		pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
+			__func__, dump->id, dump->size);
+	} else {
+		/* Drop reference count taken for bin file */
 		kobject_put(&dump->kobj);
-		return NULL;
 	}
 
-	pr_info("%s: New platform dump. ID = 0x%x Size %u\n",
-		__func__, dump->id, dump->size);
-
-	kobject_uevent(&dump->kobj, KOBJ_ADD);
-
-	return dump;
+	/* Drop our reference */
+	kobject_put(&dump->kobj);
+	return;
 }
 
 static irqreturn_t process_dump(int irq, void *data)
-- 
2.25.1

[PATCH 4.14 132/191] nvmet: fix uninitialized work for zero kato

[Greg Kroah-Hartman]

From: zhenwei pi <pizhenwei@bytedance.com>

[ Upstream commit 85bd23f3dc09a2ae9e56885420e52c54bf983713 ]

When connecting a controller with a zero kato value using the following
command line

   nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0

the warning below can be reproduced:

WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
  mod_delayed_work_on+0x59/0x90
  nvmet_update_cc+0xee/0x100 [nvmet]
  nvmet_execute_prop_set+0x72/0x80 [nvmet]
  nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
  nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
  ...

This is caused by queuing up an uninitialized work.  Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d213a), ka_work still has a chance to run (called by
nvmet_start_ctrl).

Fixes: 0d3b6a8d213a ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index d0be85d0c289a..7d6d30a2d7719 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -611,7 +611,8 @@ static void nvmet_start_ctrl(struct nvmet_ctrl *ctrl)
 	 * in case a host died before it enabled the controller.  Hence, simply
 	 * reset the keep alive timer when the controller is enabled.
 	 */
-	mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
+	if (ctrl->kato)
+		mod_delayed_work(system_wq, &ctrl->ka_work, ctrl->kato * HZ);
 }
 
 static void nvmet_clear_ctrl(struct nvmet_ctrl *ctrl)
-- 
2.25.1

[PATCH 4.14 133/191] NTB: hw: amd: fix an issue about leak system resources

[Greg Kroah-Hartman]

From: Kaige Li <likaige@loongson.cn>

[ Upstream commit 44a0a3c17919db1498cebb02ecf3cf4abc1ade7b ]

The related system resources were not released when pci_set_dma_mask(),
pci_set_consistent_dma_mask(), or pci_iomap() return error in the
amd_ntb_init_pci() function. Add pci_release_regions() to fix it.

Fixes: a1b3695820aa ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")
Signed-off-by: Kaige Li <likaige@loongson.cn>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/hw/amd/ntb_hw_amd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.c b/drivers/ntb/hw/amd/ntb_hw_amd.c
index f0788aae05c9c..72a7981ef73fb 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.c
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.c
@@ -1032,6 +1032,7 @@ static int amd_ntb_init_pci(struct amd_ntb_dev *ndev,
 
 err_dma_mask:
 	pci_clear_master(pdev);
+	pci_release_regions(pdev);
 err_pci_regions:
 	pci_disable_device(pdev);
 err_pci_enable:
-- 
2.25.1

[PATCH 4.14 134/191] perf: correct SNOOPX field offset

[Greg Kroah-Hartman]

From: Al Grant <al.grant@foss.arm.com>

[ Upstream commit f3d301c1f2f5676465cdf3259737ea19cc82731f ]

perf_event.h has macros that define the field offsets in the
data_src bitmask in perf records. The SNOOPX and REMOTE offsets
were both 37. These are distinct fields, and the bitfield layout
in perf_mem_data_src confirms that SNOOPX should be at offset 38.

Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings")
Signed-off-by: Al Grant <al.grant@foss.arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/4ac9f5cc-4388-b34a-9999-418a4099415d@foss.arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/perf_event.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 362493a2f950b..fc72a3839c9dc 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -1033,7 +1033,7 @@ union perf_mem_data_src {
 
 #define PERF_MEM_SNOOPX_FWD	0x01 /* forward */
 /* 1 free */
-#define PERF_MEM_SNOOPX_SHIFT	37
+#define PERF_MEM_SNOOPX_SHIFT  38
 
 /* locked instruction */
 #define PERF_MEM_LOCK_NA	0x01 /* not available */
-- 
2.25.1

[PATCH 4.14 135/191] i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8058d69905058ec8f467a120b5ec5bb831ea67f3 ]

Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().

But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().

Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.

This fixes the Microsoft Surface Go 2 hanging at boot.

Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627
Reported-by: Rainer Finke <rainer@finke.cc>
Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/i2c-core-acpi.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index 0d4d5dcf94f39..52ae674ebf5bf 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -219,6 +219,7 @@ static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
 void i2c_acpi_register_devices(struct i2c_adapter *adap)
 {
 	acpi_status status;
+	acpi_handle handle;
 
 	if (!has_acpi_companion(&adap->dev))
 		return;
@@ -229,6 +230,15 @@ void i2c_acpi_register_devices(struct i2c_adapter *adap)
 				     adap, NULL);
 	if (ACPI_FAILURE(status))
 		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+
+	if (!adap->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adap->dev.parent);
+	if (!handle)
+		return;
+
+	acpi_walk_dep_device_list(handle);
 }
 
 const struct acpi_device_id *
@@ -684,7 +694,6 @@ int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
 		return -ENOMEM;
 	}
 
-	acpi_walk_dep_device_list(handle);
 	return 0;
 }
 
-- 
2.25.1

[PATCH 4.14 136/191] crypto: ccp - fix error handling

[Greg Kroah-Hartman]

From: Pavel Machek <pavel@denx.de>

[ Upstream commit e356c49c6cf0db3f00e1558749170bd56e47652d ]

Fix resource leak in error handling.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccp/ccp-ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c
index 626b643d610eb..20ca9c9e109e0 100644
--- a/drivers/crypto/ccp/ccp-ops.c
+++ b/drivers/crypto/ccp/ccp-ops.c
@@ -1752,7 +1752,7 @@ ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
 			break;
 		default:
 			ret = -EINVAL;
-			goto e_ctx;
+			goto e_data;
 		}
 	} else {
 		/* Stash the context */
-- 
2.25.1

[PATCH 4.14 137/191] media: firewire: fix memory leak

[Greg Kroah-Hartman]

From: Pavel Machek <pavel@ucw.cz>

[ Upstream commit b28e32798c78a346788d412f1958f36bb760ec03 ]

Fix memory leak in node_probe.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/firewire/firedtv-fw.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/firewire/firedtv-fw.c b/drivers/media/firewire/firedtv-fw.c
index 5d634706a7eaa..382f290c3f4d5 100644
--- a/drivers/media/firewire/firedtv-fw.c
+++ b/drivers/media/firewire/firedtv-fw.c
@@ -271,8 +271,10 @@ static int node_probe(struct fw_unit *unit, const struct ieee1394_device_id *id)
 
 	name_len = fw_csr_string(unit->directory, CSR_MODEL,
 				 name, sizeof(name));
-	if (name_len < 0)
-		return name_len;
+	if (name_len < 0) {
+		err = name_len;
+		goto fail_free;
+	}
 	for (i = ARRAY_SIZE(model_names); --i; )
 		if (strlen(model_names[i]) <= name_len &&
 		    strncmp(name, model_names[i], name_len) == 0)
-- 
2.25.1

[PATCH 4.14 138/191] media: ati_remote: sanity check for both endpoints

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ]

If you do sanity checks, you should do them for both endpoints.
Hence introduce checking for endpoint type for the output
endpoint, too.

Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/ati_remote.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index d0871d60a7231..8e3af398a6c4e 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -845,6 +845,10 @@ static int ati_remote_probe(struct usb_interface *interface,
 		err("%s: endpoint_in message size==0? \n", __func__);
 		return -ENODEV;
 	}
+	if (!usb_endpoint_is_int_out(endpoint_out)) {
+		err("%s: Unexpected endpoint_out\n", __func__);
+		return -ENODEV;
+	}
 
 	ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
 	rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
-- 
2.25.1

[PATCH 4.14 139/191] media: st-delta: Fix reference count leak in delta_run_work

[Greg Kroah-Hartman]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 57cc666d36adc7b45e37ba4cd7bc4e44ec4c43d7 ]

delta_run_work() calls delta_get_sync() that increments
the reference counter. In case of failure, decrement the reference
count by calling delta_put_autosuspend().

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/delta/delta-v4l2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/sti/delta/delta-v4l2.c b/drivers/media/platform/sti/delta/delta-v4l2.c
index b2dc3d223a9c9..7c925f309158d 100644
--- a/drivers/media/platform/sti/delta/delta-v4l2.c
+++ b/drivers/media/platform/sti/delta/delta-v4l2.c
@@ -970,8 +970,10 @@ static void delta_run_work(struct work_struct *work)
 	/* enable the hardware */
 	if (!dec->pm) {
 		ret = delta_get_sync(ctx);
-		if (ret)
+		if (ret) {
+			delta_put_autosuspend(ctx);
 			goto err;
+		}
 	}
 
 	/* decode this access unit */
-- 
2.25.1

[PATCH 4.14 140/191] media: sti: Fix reference count leaks

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 6f4432bae9f2d12fc1815b5e26cc07e69bcad0df ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/hva/hva-hw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index ec25bdcfa3d1e..8dce2ccc551cb 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -272,6 +272,7 @@ static unsigned long int hva_hw_get_ip_version(struct hva_dev *hva)
 
 	if (pm_runtime_get_sync(dev) < 0) {
 		dev_err(dev, "%s     failed to get pm_runtime\n", HVA_PREFIX);
+		pm_runtime_put_noidle(dev);
 		mutex_unlock(&hva->protect_mutex);
 		return -EFAULT;
 	}
@@ -557,6 +558,7 @@ void hva_hw_dump_regs(struct hva_dev *hva, struct seq_file *s)
 
 	if (pm_runtime_get_sync(dev) < 0) {
 		seq_puts(s, "Cannot wake up IP\n");
+		pm_runtime_put_noidle(dev);
 		mutex_unlock(&hva->protect_mutex);
 		return;
 	}
-- 
2.25.1

[PATCH 4.14 141/191] media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_sync

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 7ef64ceea0008c17e94a8a2c60c5d6d46f481996 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-isp.c  | 4 +++-
 drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index fd793d3ac0725..89989b2961599 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -311,8 +311,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 
 	if (on) {
 		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put(&is->pdev->dev);
 			return ret;
+		}
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index 4a3c9948ca547..1cdca5ce48439 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -480,7 +480,7 @@ static int fimc_lite_open(struct file *file)
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
 	ret = pm_runtime_get_sync(&fimc->pdev->dev);
 	if (ret < 0)
-		goto unlock;
+		goto err_pm;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
-- 
2.25.1

[PATCH 4.14 142/191] media: exynos4-is: Fix a reference count leak due to pm_runtime_get_sync

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/media-dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index d313f9078e714..24fb0f4b95e18 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -479,8 +479,10 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 		return -ENXIO;
 
 	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put(fmd->pmf);
 		return ret;
+	}
 
 	fmd->num_sensors = 0;
 
-- 
2.25.1

[PATCH 4.14 143/191] media: exynos4-is: Fix a reference count leak

[Greg Kroah-Hartman]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 64157b2cb1940449e7df2670e85781c690266588 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/exynos4-is/mipi-csis.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 560aadabcb111..040d10df17c97 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -513,8 +513,10 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 	if (enable) {
 		s5pcsis_clear_counters(state);
 		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1)
+		if (ret && ret != 1) {
+			pm_runtime_put_noidle(&state->pdev->dev);
 			return ret;
+		}
 	}
 
 	mutex_lock(&state->lock);
-- 
2.25.1

[PATCH 4.14 144/191] media: vsp1: Fix runtime PM imbalance on error

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 98fae901c8883640202802174a4bd70a1b9118bd ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vsp1/vsp1_drv.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index eed9516e25e1d..5836fb298de27 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -549,7 +549,12 @@ int vsp1_device_get(struct vsp1_device *vsp1)
 	int ret;
 
 	ret = pm_runtime_get_sync(vsp1->dev);
-	return ret < 0 ? ret : 0;
+	if (ret < 0) {
+		pm_runtime_put_noidle(vsp1->dev);
+		return ret;
+	}
+
+	return 0;
 }
 
 /*
@@ -829,12 +834,12 @@ static int vsp1_probe(struct platform_device *pdev)
 	/* Configure device parameters based on the version register. */
 	pm_runtime_enable(&pdev->dev);
 
-	ret = pm_runtime_get_sync(&pdev->dev);
+	ret = vsp1_device_get(vsp1);
 	if (ret < 0)
 		goto done;
 
 	vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION);
-	pm_runtime_put_sync(&pdev->dev);
+	vsp1_device_put(vsp1);
 
 	for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) {
 		if ((vsp1->version & VI6_IP_VERSION_MODEL_MASK) ==
-- 
2.25.1

[PATCH 4.14 145/191] media: platform: s3c-camif: Fix runtime PM imbalance on error

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit dafa3605fe60d5a61239d670919b2a36e712481e ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Also, call pm_runtime_disable() when pm_runtime_get_sync() returns
an error code.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s3c-camif/camif-core.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/s3c-camif/camif-core.c b/drivers/media/platform/s3c-camif/camif-core.c
index c4ab63986c8f0..95b11f69555c3 100644
--- a/drivers/media/platform/s3c-camif/camif-core.c
+++ b/drivers/media/platform/s3c-camif/camif-core.c
@@ -475,7 +475,7 @@ static int s3c_camif_probe(struct platform_device *pdev)
 
 	ret = camif_media_dev_init(camif);
 	if (ret < 0)
-		goto err_alloc;
+		goto err_pm;
 
 	ret = camif_register_sensor(camif);
 	if (ret < 0)
@@ -509,10 +509,9 @@ static int s3c_camif_probe(struct platform_device *pdev)
 	media_device_unregister(&camif->media_dev);
 	media_device_cleanup(&camif->media_dev);
 	camif_unregister_media_entities(camif);
-err_alloc:
+err_pm:
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
-err_pm:
 	camif_clk_put(camif);
 err_clk:
 	s3c_camif_unregister_subdev(camif);
-- 
2.25.1

[PATCH 4.14 146/191] media: platform: sti: hva: Fix runtime PM imbalance on error

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit d912a1d9e9afe69c6066c1ceb6bfc09063074075 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/hva/hva-hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c
index 8dce2ccc551cb..1185f6b6721e9 100644
--- a/drivers/media/platform/sti/hva/hva-hw.c
+++ b/drivers/media/platform/sti/hva/hva-hw.c
@@ -393,7 +393,7 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva)
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
 		dev_err(dev, "%s     failed to set PM\n", HVA_PREFIX);
-		goto err_clk;
+		goto err_pm;
 	}
 
 	/* check IP hardware version */
-- 
2.25.1

[PATCH 4.14 147/191] media: bdisp: Fix runtime PM imbalance on error

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
index 601ca2b2ecd34..79de7d413cf5e 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c
@@ -1367,7 +1367,7 @@ static int bdisp_probe(struct platform_device *pdev)
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
 		dev_err(dev, "failed to set PM\n");
-		goto err_dbg;
+		goto err_pm;
 	}
 
 	/* Filters */
@@ -1395,7 +1395,6 @@ static int bdisp_probe(struct platform_device *pdev)
 	bdisp_hw_free_filters(bdisp->dev);
 err_pm:
 	pm_runtime_put(dev);
-err_dbg:
 	bdisp_debugfs_remove(bdisp);
 err_v4l2:
 	v4l2_device_unregister(&bdisp->v4l2_dev);
-- 
2.25.1

[PATCH 4.14 148/191] media: media/pci: prevent memory leak in bttv_probe

[Greg Kroah-Hartman]

From: Xiaolong Huang <butterflyhuangxx@gmail.com>

[ Upstream commit 7b817585b730665126b45df5508dd69526448bc8 ]

In bttv_probe if some functions such as pci_enable_device,
pci_set_dma_mask and request_mem_region fails the allocated
 memory for btv should be released.

Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/bt8xx/bttv-driver.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c
index 227086a2e99c8..9e38c8b3ea762 100644
--- a/drivers/media/pci/bt8xx/bttv-driver.c
+++ b/drivers/media/pci/bt8xx/bttv-driver.c
@@ -4055,11 +4055,13 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	btv->id  = dev->device;
 	if (pci_enable_device(dev)) {
 		pr_warn("%d: Can't enable device\n", btv->c.nr);
-		return -EIO;
+		result = -EIO;
+		goto free_mem;
 	}
 	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
 		pr_warn("%d: No suitable DMA available\n", btv->c.nr);
-		return -EIO;
+		result = -EIO;
+		goto free_mem;
 	}
 	if (!request_mem_region(pci_resource_start(dev,0),
 				pci_resource_len(dev,0),
@@ -4067,7 +4069,8 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 		pr_warn("%d: can't request iomem (0x%llx)\n",
 			btv->c.nr,
 			(unsigned long long)pci_resource_start(dev, 0));
-		return -EBUSY;
+		result = -EBUSY;
+		goto free_mem;
 	}
 	pci_set_master(dev);
 	pci_set_command(dev);
@@ -4253,6 +4256,10 @@ static int bttv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id)
 	release_mem_region(pci_resource_start(btv->c.pci,0),
 			   pci_resource_len(btv->c.pci,0));
 	pci_disable_device(btv->c.pci);
+
+free_mem:
+	bttvs[btv->c.nr] = NULL;
+	kfree(btv);
 	return result;
 }
 
-- 
2.25.1

[PATCH 4.14 149/191] media: uvcvideo: Ensure all probed info is returned to v4l2

[Greg Kroah-Hartman]

From: Adam Goode <agoode@google.com>

[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ]

bFrameIndex and bFormatIndex can be negotiated by the camera during
probing, resulting in the camera choosing a different format than
expected. v4l2 can already accommodate such changes, but the code was
not updating the proper fields.

Without such a change, v4l2 would potentially interpret the payload
incorrectly, causing corrupted output. This was happening on the
Elgato HD60 S+, which currently always renegotiates to format 1.

As an aside, the Elgato firmware is buggy and should not be renegotating,
but it is still a valid thing for the camera to do. Both macOS and Windows
will properly probe and read uncorrupted images from this camera.

With this change, both qv4l2 and chromium can now read uncorrupted video
from the Elgato HD60 S+.

[Add blank lines, remove periods at the of messages]

Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_v4l2.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index 3e7e283a44a8e..644afd55c0f0f 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -252,11 +252,41 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream,
 	if (ret < 0)
 		goto done;
 
+	/* After the probe, update fmt with the values returned from
+	 * negotiation with the device.
+	 */
+	for (i = 0; i < stream->nformats; ++i) {
+		if (probe->bFormatIndex == stream->format[i].index) {
+			format = &stream->format[i];
+			break;
+		}
+	}
+
+	if (i == stream->nformats) {
+		uvc_trace(UVC_TRACE_FORMAT, "Unknown bFormatIndex %u\n",
+			  probe->bFormatIndex);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < format->nframes; ++i) {
+		if (probe->bFrameIndex == format->frame[i].bFrameIndex) {
+			frame = &format->frame[i];
+			break;
+		}
+	}
+
+	if (i == format->nframes) {
+		uvc_trace(UVC_TRACE_FORMAT, "Unknown bFrameIndex %u\n",
+			  probe->bFrameIndex);
+		return -EINVAL;
+	}
+
 	fmt->fmt.pix.width = frame->wWidth;
 	fmt->fmt.pix.height = frame->wHeight;
 	fmt->fmt.pix.field = V4L2_FIELD_NONE;
 	fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(format, frame);
 	fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize;
+	fmt->fmt.pix.pixelformat = format->fcc;
 	fmt->fmt.pix.colorspace = format->colorspace;
 	fmt->fmt.pix.priv = 0;
 
-- 
2.25.1

[PATCH 4.14 150/191] mmc: sdio: Check for CISTPL_VERS_1 buffer size

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 8ebe2607965d3e2dc02029e8c7dd35fbe508ffd0 ]

Before parsing CISTPL_VERS_1 structure check that its size is at least two
bytes to prevent buffer overflow.

Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200727133837.19086-2-pali@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/sdio_cis.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index f8c372839d244..2ca5cd79018b4 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -30,6 +30,9 @@ static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func,
 	unsigned i, nr_strings;
 	char **buffer, *string;
 
+	if (size < 2)
+		return 0;
+
 	/* Find all null-terminated (including zero length) strings in
 	   the TPLLV1_INFO field. Trailing garbage is ignored. */
 	buf += 2;
-- 
2.25.1

[PATCH 4.14 151/191] media: saa7134: avoid a shift overflow

[Greg Kroah-Hartman]

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ]

As reported by smatch:
	drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?

On a 64-bits Kernel, the shift might be bigger than 32 bits.

In real, this should never happen, but let's shut up the warning.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7134/saa7134-tvaudio.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/saa7134/saa7134-tvaudio.c b/drivers/media/pci/saa7134/saa7134-tvaudio.c
index 68d400e1e240e..8c3da6f7a60f1 100644
--- a/drivers/media/pci/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/pci/saa7134/saa7134-tvaudio.c
@@ -693,7 +693,8 @@ int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value)
 {
 	int err;
 
-	audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n", reg << 2, value);
+	audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n",
+		  (reg << 2) & 0xffffffff, value);
 	err = saa_dsp_wait_bit(dev,SAA7135_DSP_RWSTATE_WRR);
 	if (err < 0)
 		return err;
-- 
2.25.1

[PATCH 4.14 152/191] fs: dlm: fix configfs memory leak

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 3d2825c8c6105b0f36f3ff72760799fa2e71420e ]

This patch fixes the following memory detected by kmemleak and umount
gfs2 filesystem which removed the last lockspace:

unreferenced object 0xffff9264f482f600 (size 192):
  comm "dlm_controld", pid 325, jiffies 4294690276 (age 48.136s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 6e 6f 64 65 73 00 00 00  ........nodes...
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000060481d7>] make_space+0x41/0x130
    [<000000008d905d46>] configfs_mkdir+0x1a2/0x5f0
    [<00000000729502cf>] vfs_mkdir+0x155/0x210
    [<000000000369bcf1>] do_mkdirat+0x6d/0x110
    [<00000000cc478a33>] do_syscall_64+0x33/0x40
    [<00000000ce9ccf01>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

The patch just remembers the "nodes" entry pointer in space as I think
it's created as subdirectory when parent "spaces" is created. In
function drop_space() we will lost the pointer reference to nds because
configfs_remove_default_groups(). However as this subdirectory is always
available when "spaces" exists it will just be freed when "spaces" will be
freed.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/config.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/dlm/config.c b/fs/dlm/config.c
index 7211e826d90df..472f4f835d3e1 100644
--- a/fs/dlm/config.c
+++ b/fs/dlm/config.c
@@ -218,6 +218,7 @@ struct dlm_space {
 	struct list_head members;
 	struct mutex members_lock;
 	int members_count;
+	struct dlm_nodes *nds;
 };
 
 struct dlm_comms {
@@ -426,6 +427,7 @@ static struct config_group *make_space(struct config_group *g, const char *name)
 	INIT_LIST_HEAD(&sp->members);
 	mutex_init(&sp->members_lock);
 	sp->members_count = 0;
+	sp->nds = nds;
 	return &sp->group;
 
  fail:
@@ -447,6 +449,7 @@ static void drop_space(struct config_group *g, struct config_item *i)
 static void release_space(struct config_item *i)
 {
 	struct dlm_space *sp = config_item_to_space(i);
+	kfree(sp->nds);
 	kfree(sp);
 }
 
-- 
2.25.1

[PATCH 4.14 153/191] media: venus: core: Fix runtime PM imbalance in venus_probe

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit bbe516e976fce538db96bd2b7287df942faa14a3 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced. For other error
paths after this call, things are the same.

Fix this by adding pm_runtime_put_noidle() after 'err_runtime_disable'
label. But in this case, the error path after pm_runtime_put_sync()
will decrease PM usage counter twice. Thus add an extra
pm_runtime_get_noresume() in this path to balance PM counter.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 9360b36b82cd8..0a011b117a6db 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -236,8 +236,10 @@ static int venus_probe(struct platform_device *pdev)
 		goto err_dev_unregister;
 
 	ret = pm_runtime_put_sync(dev);
-	if (ret)
+	if (ret) {
+		pm_runtime_get_noresume(dev);
 		goto err_dev_unregister;
+	}
 
 	return 0;
 
@@ -248,6 +250,7 @@ static int venus_probe(struct platform_device *pdev)
 err_venus_shutdown:
 	venus_shutdown(dev);
 err_runtime_disable:
+	pm_runtime_put_noidle(dev);
 	pm_runtime_set_suspended(dev);
 	pm_runtime_disable(dev);
 	hfi_destroy(core);
-- 
2.25.1

[PATCH 4.14 154/191] ntfs: add check for mft record size in superblock

[Greg Kroah-Hartman]

From: Rustam Kovhaev <rkovhaev@gmail.com>

[ Upstream commit 4f8c94022f0bc3babd0a124c0a7dcdd7547bd94e ]

Number of bytes allocated for mft record should be equal to the mft record
size stored in ntfs superblock as reported by syzbot, userspace might
trigger out-of-bounds read by dereferencing ctx->attr in ntfs_attr_find()

Reported-by: syzbot+aed06913f36eff9b544e@syzkaller.appspotmail.com
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: syzbot+aed06913f36eff9b544e@syzkaller.appspotmail.com
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Link: https://syzkaller.appspot.com/bug?extid=aed06913f36eff9b544e
Link: https://lkml.kernel.org/r/20200824022804.226242-1-rkovhaev@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ntfs/inode.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 7c410f8794124..2aa073b82d30f 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -1844,6 +1844,12 @@ int ntfs_read_inode_mount(struct inode *vi)
 		brelse(bh);
 	}
 
+	if (le32_to_cpu(m->bytes_allocated) != vol->mft_record_size) {
+		ntfs_error(sb, "Incorrect mft record size %u in superblock, should be %u.",
+				le32_to_cpu(m->bytes_allocated), vol->mft_record_size);
+		goto err_out;
+	}
+
 	/* Apply the mst fixups. */
 	if (post_read_mst_fixup((NTFS_RECORD*)m, vol->mft_record_size)) {
 		/* FIXME: Try to use the $MFTMirr now. */
-- 
2.25.1

[PATCH 4.14 155/191] mac80211: handle lack of sband->bitrates in rates

[Greg Kroah-Hartman]

From: Thomas Pedersen <thomas@adapt-ip.com>

[ Upstream commit 8b783d104e7f40684333d2ec155fac39219beb2f ]

Even though a driver or mac80211 shouldn't produce a
legacy bitrate if sband->bitrates doesn't exist, don't
crash if that is the case either.

This fixes a kernel panic if station dump is run before
last_rate can be updated with a data frame when
sband->bitrates is missing (eg. in S1G bands).

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
Link: https://lore.kernel.org/r/20201005164522.18069-1-thomas@adapt-ip.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/cfg.c      | 3 ++-
 net/mac80211/sta_info.c | 4 ++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index c883cb67b7311..0b82d8da4ab0a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -661,7 +661,8 @@ void sta_set_rate_info_tx(struct sta_info *sta,
 		u16 brate;
 
 		sband = ieee80211_get_sband(sta->sdata);
-		if (sband) {
+		WARN_ON_ONCE(sband && !sband->bitrates);
+		if (sband && sband->bitrates) {
 			brate = sband->bitrates[rate->idx].bitrate;
 			rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
 		}
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 6af5fda6461ce..2a18687019003 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -2004,6 +2004,10 @@ static void sta_stats_decode_rate(struct ieee80211_local *local, u16 rate,
 
 		rinfo->flags = 0;
 		sband = local->hw.wiphy->bands[band];
+
+		if (WARN_ON_ONCE(!sband->bitrates))
+			break;
+
 		brate = sband->bitrates[rate_idx].bitrate;
 		if (rinfo->bw == RATE_INFO_BW_5)
 			shift = 2;
-- 
2.25.1

[PATCH 4.14 156/191] PM: hibernate: remove the bogus call to get_gendisk() in software_resume()

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 428805c0c5e76ef643b1fbc893edfb636b3d8aef ]

get_gendisk grabs a reference on the disk and file operation, so this
code will leak both of them while having absolutely no use for the
gendisk itself.

This effectively reverts commit 2df83fa4bce421f ("PM / Hibernate: Use
get_gendisk to verify partition if resume_file is integer format")

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/power/hibernate.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 2e65aacfa1162..02df69a8ee3c0 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -833,17 +833,6 @@ static int software_resume(void)
 
 	/* Check if the device is there */
 	swsusp_resume_device = name_to_dev_t(resume_file);
-
-	/*
-	 * name_to_dev_t is ineffective to verify parition if resume_file is in
-	 * integer format. (e.g. major:minor)
-	 */
-	if (isdigit(resume_file[0]) && resume_wait) {
-		int partno;
-		while (!get_gendisk(swsusp_resume_device, &partno))
-			msleep(10);
-	}
-
 	if (!swsusp_resume_device) {
 		/*
 		 * Some device discovery might still be in progress; we need
-- 
2.25.1

[PATCH 4.14 157/191] scsi: mvumi: Fix error return in mvumi_io_attach()

[Greg Kroah-Hartman]

From: Jing Xiangfeng <jingxiangfeng@huawei.com>

[ Upstream commit 055f15ab2cb4a5cbc4c0a775ef3d0066e0fa9b34 ]

Return PTR_ERR() from the error handling case instead of 0.

Link: https://lore.kernel.org/r/20200910123848.93649-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mvumi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
index fe97401ad1927..1fffa301c1b9f 100644
--- a/drivers/scsi/mvumi.c
+++ b/drivers/scsi/mvumi.c
@@ -2439,6 +2439,7 @@ static int mvumi_io_attach(struct mvumi_hba *mhba)
 	if (IS_ERR(mhba->dm_thread)) {
 		dev_err(&mhba->pdev->dev,
 			"failed to create device scan thread\n");
+		ret = PTR_ERR(mhba->dm_thread);
 		mutex_unlock(&mhba->sas_discovery_mutex);
 		goto fail_create_thread;
 	}
-- 
2.25.1

[PATCH 4.14 158/191] scsi: target: core: Add CONTROL field for trace events

[Greg Kroah-Hartman]

From: Roman Bolshakov <r.bolshakov@yadro.com>

[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ]

trace-cmd report doesn't show events from target subsystem because
scsi_command_size() leaks through event format string:

  [target:target_sequencer_start] function scsi_command_size not defined
  [target:target_cmd_complete] function scsi_command_size not defined

Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't
help because an expression is used inside TP_printk(). trace-cmd event
parser doesn't understand minus sign inside [ ]:

  Error: expected ']' but read '-'

Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated
field for CONTROL byte.

Link: https://lore.kernel.org/r/20200929125957.83069-1-r.bolshakov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/scsi/scsi_common.h    |  7 +++++++
 include/trace/events/target.h | 12 ++++++------
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/include/scsi/scsi_common.h b/include/scsi/scsi_common.h
index 731ac09ed2313..5b567b43e1b16 100644
--- a/include/scsi/scsi_common.h
+++ b/include/scsi/scsi_common.h
@@ -25,6 +25,13 @@ scsi_command_size(const unsigned char *cmnd)
 		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
 }
 
+static inline unsigned char
+scsi_command_control(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		cmnd[1] : cmnd[COMMAND_SIZE(cmnd[0]) - 1];
+}
+
 /* Returns a human-readable name for the device */
 extern const char *scsi_device_type(unsigned type);
 
diff --git a/include/trace/events/target.h b/include/trace/events/target.h
index 914a872dd3435..e87a3716b0ac9 100644
--- a/include/trace/events/target.h
+++ b/include/trace/events/target.h
@@ -140,6 +140,7 @@ TRACE_EVENT(target_sequencer_start,
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
+		__field( unsigned char,	control		)
 		__array( unsigned char,	cdb, TCM_MAX_COMMAND_SIZE	)
 		__string( initiator,	cmd->se_sess->se_node_acl->initiatorname	)
 	),
@@ -149,6 +150,7 @@ TRACE_EVENT(target_sequencer_start,
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
+		__entry->control	= scsi_command_control(cmd->t_task_cdb);
 		memcpy(__entry->cdb, cmd->t_task_cdb, TCM_MAX_COMMAND_SIZE);
 		__assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname);
 	),
@@ -158,9 +160,7 @@ TRACE_EVENT(target_sequencer_start,
 		  show_opcode_name(__entry->opcode),
 		  __entry->data_length, __print_hex(__entry->cdb, 16),
 		  show_task_attribute_name(__entry->task_attribute),
-		  scsi_command_size(__entry->cdb) <= 16 ?
-			__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
-			__entry->cdb[1]
+		  __entry->control
 	)
 );
 
@@ -175,6 +175,7 @@ TRACE_EVENT(target_cmd_complete,
 		__field( unsigned int,	opcode		)
 		__field( unsigned int,	data_length	)
 		__field( unsigned int,	task_attribute  )
+		__field( unsigned char,	control		)
 		__field( unsigned char,	scsi_status	)
 		__field( unsigned char,	sense_length	)
 		__array( unsigned char,	cdb, TCM_MAX_COMMAND_SIZE	)
@@ -187,6 +188,7 @@ TRACE_EVENT(target_cmd_complete,
 		__entry->opcode		= cmd->t_task_cdb[0];
 		__entry->data_length	= cmd->data_length;
 		__entry->task_attribute	= cmd->sam_task_attr;
+		__entry->control	= scsi_command_control(cmd->t_task_cdb);
 		__entry->scsi_status	= cmd->scsi_status;
 		__entry->sense_length	= cmd->scsi_status == SAM_STAT_CHECK_CONDITION ?
 			min(18, ((u8 *) cmd->sense_buffer)[SPC_ADD_SENSE_LEN_OFFSET] + 8) : 0;
@@ -203,9 +205,7 @@ TRACE_EVENT(target_cmd_complete,
 		  show_opcode_name(__entry->opcode),
 		  __entry->data_length, __print_hex(__entry->cdb, 16),
 		  show_task_attribute_name(__entry->task_attribute),
-		  scsi_command_size(__entry->cdb) <= 16 ?
-			__entry->cdb[scsi_command_size(__entry->cdb) - 1] :
-			__entry->cdb[1]
+		  __entry->control
 	)
 );
 
-- 
2.25.1

[PATCH 4.14 159/191] mic: vop: copy data to kernel space then write to io memory

[Greg Kroah-Hartman]

From: Sherry Sun <sherry.sun@nxp.com>

[ Upstream commit 675f0ad4046946e80412896436164d172cd92238 ]

Read and write io memory should address align on ARCH ARM. Change to use
memcpy_toio to avoid kernel panic caused by the address un-align issue.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929091106.24624-5-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/mic/vop/vop_vringh.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c
index fed992e2c2583..99bde52a3a256 100644
--- a/drivers/misc/mic/vop/vop_vringh.c
+++ b/drivers/misc/mic/vop/vop_vringh.c
@@ -611,6 +611,7 @@ static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf,
 	size_t partlen;
 	bool dma = VOP_USE_DMA;
 	int err = 0;
+	size_t offset = 0;
 
 	if (daddr & (dma_alignment - 1)) {
 		vdev->tx_dst_unaligned += len;
@@ -659,13 +660,20 @@ static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf,
 	 * We are copying to IO below and should ideally use something
 	 * like copy_from_user_toio(..) if it existed.
 	 */
-	if (copy_from_user((void __force *)dbuf, ubuf, len)) {
-		err = -EFAULT;
-		dev_err(vop_dev(vdev), "%s %d err %d\n",
-			__func__, __LINE__, err);
-		goto err;
+	while (len) {
+		partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE);
+
+		if (copy_from_user(vvr->buf, ubuf + offset, partlen)) {
+			err = -EFAULT;
+			dev_err(vop_dev(vdev), "%s %d err %d\n",
+				__func__, __LINE__, err);
+			goto err;
+		}
+		memcpy_toio(dbuf + offset, vvr->buf, partlen);
+		offset += partlen;
+		vdev->out_bytes += partlen;
+		len -= partlen;
 	}
-	vdev->out_bytes += len;
 	err = 0;
 err:
 	vpdev->hw_ops->iounmap(vpdev, dbuf);
-- 
2.25.1

[PATCH 4.14 160/191] misc: vop: add round_up(x,4) for vring_size to avoid kernel panic

[Greg Kroah-Hartman]

From: Sherry Sun <sherry.sun@nxp.com>

[ Upstream commit cc1a2679865a94b83804822996eed010a50a7c1d ]

Since struct _mic_vring_info and vring are allocated together and follow
vring, if the vring_size() is not four bytes aligned, which will cause
the start address of struct _mic_vring_info is not four byte aligned.
For example, when vring entries is 128, the vring_size() will be 5126
bytes. The _mic_vring_info struct layout in ddr looks like:
0x90002400:  00000000 00390000 EE010000 0000C0FF
Here 0x39 is the avail_idx member, and 0xC0FFEE01 is the magic member.

When EP use ioread32(magic) to reads the magic in RC's share memory, it
will cause kernel panic on ARM64 platform due to the cross-byte io read.
Here read magic in user space use le32toh(vr0->info->magic) will meet
the same issue.
So add round_up(x,4) for vring_size, then the struct _mic_vring_info
will store in this way:
0x90002400:  00000000 00000000 00000039 C0FFEE01
Which will avoid kernel panic when read magic in struct _mic_vring_info.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Link: https://lore.kernel.org/r/20200929091106.24624-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/mic/vop/vop_main.c   | 2 +-
 drivers/misc/mic/vop/vop_vringh.c | 4 ++--
 samples/mic/mpssd/mpssd.c         | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/misc/mic/vop/vop_main.c b/drivers/misc/mic/vop/vop_main.c
index a341938c7e2c6..e7cb57f8ddfe2 100644
--- a/drivers/misc/mic/vop/vop_main.c
+++ b/drivers/misc/mic/vop/vop_main.c
@@ -301,7 +301,7 @@ static struct virtqueue *vop_find_vq(struct virtio_device *dev,
 	/* First assign the vring's allocated in host memory */
 	vqconfig = _vop_vq_config(vdev->desc) + index;
 	memcpy_fromio(&config, vqconfig, sizeof(config));
-	_vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN);
+	_vr_size = round_up(vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN), 4);
 	vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info));
 	va = vpdev->hw_ops->ioremap(vpdev, le64_to_cpu(config.address),
 			vr_size);
diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c
index 99bde52a3a256..49e7a7240469c 100644
--- a/drivers/misc/mic/vop/vop_vringh.c
+++ b/drivers/misc/mic/vop/vop_vringh.c
@@ -308,7 +308,7 @@ static int vop_virtio_add_device(struct vop_vdev *vdev,
 
 		num = le16_to_cpu(vqconfig[i].num);
 		mutex_init(&vvr->vr_mutex);
-		vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) +
+		vr_size = PAGE_ALIGN(round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4) +
 			sizeof(struct _mic_vring_info));
 		vr->va = (void *)
 			__get_free_pages(GFP_KERNEL | __GFP_ZERO,
@@ -320,7 +320,7 @@ static int vop_virtio_add_device(struct vop_vdev *vdev,
 			goto err;
 		}
 		vr->len = vr_size;
-		vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN);
+		vr->info = vr->va + round_up(vring_size(num, MIC_VIRTIO_RING_ALIGN), 4);
 		vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i);
 		vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size,
 					 DMA_BIDIRECTIONAL);
diff --git a/samples/mic/mpssd/mpssd.c b/samples/mic/mpssd/mpssd.c
index 49db1def1721c..84e583ab8fd0c 100644
--- a/samples/mic/mpssd/mpssd.c
+++ b/samples/mic/mpssd/mpssd.c
@@ -414,9 +414,9 @@ mic_virtio_copy(struct mic_info *mic, int fd,
 
 static inline unsigned _vring_size(unsigned int num, unsigned long align)
 {
-	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+	return _ALIGN_UP(((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
 				+ align - 1) & ~(align - 1))
-		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num, 4);
 }
 
 /*
-- 
2.25.1

[PATCH 4.14 161/191] usb: gadget: function: printer: fix use-after-free in __lock_acquire

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit e8d5f92b8d30bb4ade76494490c3c065e12411b1 ]

Fix this by increase object reference count.

BUG: KASAN: use-after-free in __lock_acquire+0x3fd4/0x4180
kernel/locking/lockdep.c:3831
Read of size 8 at addr ffff8880683b0018 by task syz-executor.0/3377

CPU: 1 PID: 3377 Comm: syz-executor.0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:641
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
 __lock_acquire+0x3fd4/0x4180 kernel/locking/lockdep.c:3831
 lock_acquire+0x127/0x350 kernel/locking/lockdep.c:4488
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
 printer_ioctl+0x4a/0x110 drivers/usb/gadget/function/f_printer.c:723
 vfs_ioctl fs/ioctl.c:47 [inline]
 ksys_ioctl+0xfb/0x130 fs/ioctl.c:763
 __do_sys_ioctl fs/ioctl.c:772 [inline]
 __se_sys_ioctl fs/ioctl.c:770 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4531a9
Code: ed 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 0f 83 bb 60 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fd14ad72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 00000000004531a9
RDX: fffffffffffffff9 RSI: 000000000000009e RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004bbd61
R13: 00000000004d0a98 R14: 00007fd14ad736d4 R15: 00000000ffffffff

Allocated by task 2393:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc.constprop.3+0xa7/0xd0 mm/kasan/common.c:515
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529
 kmem_cache_alloc_trace+0xfa/0x2d0 mm/slub.c:2813
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 gprinter_alloc+0xa1/0x870 drivers/usb/gadget/function/f_printer.c:1416
 usb_get_function+0x58/0xc0 drivers/usb/gadget/functions.c:61
 config_usb_cfg_link+0x1ed/0x3e0 drivers/usb/gadget/configfs.c:444
 configfs_symlink+0x527/0x11d0 fs/configfs/symlink.c:202
 vfs_symlink+0x33d/0x5b0 fs/namei.c:4201
 do_symlinkat+0x11b/0x1d0 fs/namei.c:4228
 __do_sys_symlinkat fs/namei.c:4242 [inline]
 __se_sys_symlinkat fs/namei.c:4239 [inline]
 __x64_sys_symlinkat+0x73/0xb0 fs/namei.c:4239
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3368:
 save_stack+0x21/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:337 [inline]
 __kasan_slab_free+0x135/0x190 mm/kasan/common.c:476
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485
 slab_free_hook mm/slub.c:1444 [inline]
 slab_free_freelist_hook mm/slub.c:1477 [inline]
 slab_free mm/slub.c:3034 [inline]
 kfree+0xf7/0x410 mm/slub.c:3995
 gprinter_free+0x49/0xd0 drivers/usb/gadget/function/f_printer.c:1353
 usb_put_function+0x38/0x50 drivers/usb/gadget/functions.c:87
 config_usb_cfg_unlink+0x2db/0x3b0 drivers/usb/gadget/configfs.c:485
 configfs_unlink+0x3b9/0x7f0 fs/configfs/symlink.c:250
 vfs_unlink+0x287/0x570 fs/namei.c:4073
 do_unlinkat+0x4f9/0x620 fs/namei.c:4137
 __do_sys_unlink fs/namei.c:4184 [inline]
 __se_sys_unlink fs/namei.c:4182 [inline]
 __x64_sys_unlink+0x42/0x50 fs/namei.c:4182
 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880683b0000
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 24 bytes inside of
 1024-byte region [ffff8880683b0000, ffff8880683b0400)
The buggy address belongs to the page:
page:ffffea0001a0ec00 refcount:1 mapcount:0 mapping:ffff88806c00e300
index:0xffff8880683b1800 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 0000000000000000 0000000600000001 ffff88806c00e300
raw: ffff8880683b1800 000000008010000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Reported-by: Kyungtae Kim <kt0755@gmail.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_printer.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index e6d4fa5eeff10..b2b43a5518786 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -35,6 +35,7 @@
 #include <linux/types.h>
 #include <linux/ctype.h>
 #include <linux/cdev.h>
+#include <linux/kref.h>
 
 #include <asm/byteorder.h>
 #include <linux/io.h>
@@ -68,7 +69,7 @@ struct printer_dev {
 	struct usb_gadget	*gadget;
 	s8			interface;
 	struct usb_ep		*in_ep, *out_ep;
-
+	struct kref             kref;
 	struct list_head	rx_reqs;	/* List of free RX structs */
 	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
 	struct list_head	rx_buffers;	/* List of completed xfers */
@@ -222,6 +223,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
 
 /*-------------------------------------------------------------------------*/
 
+static void printer_dev_free(struct kref *kref)
+{
+	struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
+
+	kfree(dev);
+}
+
 static struct usb_request *
 printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
 {
@@ -352,6 +360,7 @@ printer_open(struct inode *inode, struct file *fd)
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_get(&dev->kref);
 	DBG(dev, "printer_open returned %x\n", ret);
 	return ret;
 }
@@ -369,6 +378,7 @@ printer_close(struct inode *inode, struct file *fd)
 	dev->printer_status &= ~PRINTER_SELECTED;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
+	kref_put(&dev->kref, printer_dev_free);
 	DBG(dev, "printer_close\n");
 
 	return 0;
@@ -1354,7 +1364,8 @@ static void gprinter_free(struct usb_function *f)
 	struct f_printer_opts *opts;
 
 	opts = container_of(f->fi, struct f_printer_opts, func_inst);
-	kfree(dev);
+
+	kref_put(&dev->kref, printer_dev_free);
 	mutex_lock(&opts->lock);
 	--opts->refcnt;
 	mutex_unlock(&opts->lock);
@@ -1423,6 +1434,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
 		return ERR_PTR(-ENOMEM);
 	}
 
+	kref_init(&dev->kref);
 	++opts->refcnt;
 	dev->minor = opts->minor;
 	dev->pnp_string = opts->pnp_string;
-- 
2.25.1

[PATCH 4.14 162/191] udf: Limit sparing table size

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 44ac6b829c4e173fdf6df18e6dd86aecf9a3dc99 ]

Although UDF standard allows it, we don't support sparing table larger
than a single block. Check it during mount so that we don't try to
access memory beyond end of buffer.

Reported-by: syzbot+9991561e714f597095da@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/udf/super.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/udf/super.c b/fs/udf/super.c
index 51de27685e185..2b8147ecd97fb 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1385,6 +1385,12 @@ static int udf_load_sparable_map(struct super_block *sb,
 			(int)spm->numSparingTables);
 		return -EIO;
 	}
+	if (le32_to_cpu(spm->sizeSparingTable) > sb->s_blocksize) {
+		udf_err(sb, "error loading logical volume descriptor: "
+			"Too big sparing table size (%u)\n",
+			le32_to_cpu(spm->sizeSparingTable));
+		return -EIO;
+	}
 
 	for (i = 0; i < spm->numSparingTables; i++) {
 		loc = le32_to_cpu(spm->locSparingTable[i]);
-- 
2.25.1

[PATCH 4.14 163/191] udf: Avoid accessing uninitialized data on failed inode read

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit 044e2e26f214e5ab26af85faffd8d1e4ec066931 ]

When we fail to read inode, some data accessed in udf_evict_inode() may
be uninitialized. Move the accesses to !is_bad_inode() branch.

Reported-by: syzbot+91f02b28f9bb5f5f1341@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/udf/inode.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 3c1b54091d6cc..dd57bd446340c 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -132,21 +132,24 @@ void udf_evict_inode(struct inode *inode)
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	int want_delete = 0;
 
-	if (!inode->i_nlink && !is_bad_inode(inode)) {
-		want_delete = 1;
-		udf_setsize(inode, 0);
-		udf_update_inode(inode, IS_SYNC(inode));
+	if (!is_bad_inode(inode)) {
+		if (!inode->i_nlink) {
+			want_delete = 1;
+			udf_setsize(inode, 0);
+			udf_update_inode(inode, IS_SYNC(inode));
+		}
+		if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
+		    inode->i_size != iinfo->i_lenExtents) {
+			udf_warn(inode->i_sb,
+				 "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
+				 inode->i_ino, inode->i_mode,
+				 (unsigned long long)inode->i_size,
+				 (unsigned long long)iinfo->i_lenExtents);
+		}
 	}
 	truncate_inode_pages_final(&inode->i_data);
 	invalidate_inode_buffers(inode);
 	clear_inode(inode);
-	if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
-	    inode->i_size != iinfo->i_lenExtents) {
-		udf_warn(inode->i_sb, "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
-			 inode->i_ino, inode->i_mode,
-			 (unsigned long long)inode->i_size,
-			 (unsigned long long)iinfo->i_lenExtents);
-	}
 	kfree(iinfo->i_ext.i_data);
 	iinfo->i_ext.i_data = NULL;
 	udf_clear_extent_cache(inode);
-- 
2.25.1

[PATCH 4.14 164/191] USB: cdc-acm: handle broken union descriptors

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 960c7339de27c6d6fec13b54880501c3576bb08d ]

Handle broken union functional descriptors where the master-interface
doesn't exist or where its class is of neither Communication or Data
type (as required by the specification) by falling back to
"combined-interface" probing.

Note that this still allows for handling union descriptors with switched
interfaces.

This specifically makes the Whistler radio scanners TRX series devices
work with the driver without adding further quirks to the device-id
table.

Reported-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Tested-by: Daniel Caujolle-Bert <f1rmb.daniel@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200921135951.24045-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/class/cdc-acm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b3e4b014a1cc0..dff9860213624 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1287,9 +1287,21 @@ static int acm_probe(struct usb_interface *intf,
 			}
 		}
 	} else {
+		int class = -1;
+
 		data_intf_num = union_header->bSlaveInterface0;
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+		if (control_interface)
+			class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+		if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+			dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+			combined_interfaces = 1;
+			control_interface = data_interface = intf;
+			goto look_for_collapsed_interface;
+		}
 	}
 
 	if (!control_interface || !data_interface) {
-- 
2.25.1

[PATCH 4.14 165/191] can: flexcan: flexcan_chip_stop(): add error handling and propagate error value

[Greg Kroah-Hartman]

From: Joakim Zhang <qiangqing.zhang@nxp.com>

[ Upstream commit 9ad02c7f4f279504bdd38ab706fdc97d5f2b2a9c ]

This patch implements error handling and propagates the error value of
flexcan_chip_stop(). This function will be called from flexcan_suspend()
in an upcoming patch in some SoCs which support LPSR mode.

Add a new function flexcan_chip_stop_disable_on_error() that tries to
disable the chip even in case of errors.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[mkl: introduce flexcan_chip_stop_disable_on_error() and use it in flexcan_close()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200922144429.2613631-11-mkl@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/flexcan.c | 34 ++++++++++++++++++++++++++++------
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 84dd79041285a..94468a883f369 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1055,18 +1055,23 @@ static int flexcan_chip_start(struct net_device *dev)
 	return err;
 }
 
-/* flexcan_chip_stop
+/* __flexcan_chip_stop
  *
- * this functions is entered with clocks enabled
+ * this function is entered with clocks enabled
  */
-static void flexcan_chip_stop(struct net_device *dev)
+static int __flexcan_chip_stop(struct net_device *dev, bool disable_on_error)
 {
 	struct flexcan_priv *priv = netdev_priv(dev);
 	struct flexcan_regs __iomem *regs = priv->regs;
+	int err;
 
 	/* freeze + disable module */
-	flexcan_chip_freeze(priv);
-	flexcan_chip_disable(priv);
+	err = flexcan_chip_freeze(priv);
+	if (err && !disable_on_error)
+		return err;
+	err = flexcan_chip_disable(priv);
+	if (err && !disable_on_error)
+		goto out_chip_unfreeze;
 
 	/* Disable all interrupts */
 	flexcan_write(0, &regs->imask2);
@@ -1076,6 +1081,23 @@ static void flexcan_chip_stop(struct net_device *dev)
 
 	flexcan_transceiver_disable(priv);
 	priv->can.state = CAN_STATE_STOPPED;
+
+	return 0;
+
+ out_chip_unfreeze:
+	flexcan_chip_unfreeze(priv);
+
+	return err;
+}
+
+static inline int flexcan_chip_stop_disable_on_error(struct net_device *dev)
+{
+	return __flexcan_chip_stop(dev, true);
+}
+
+static inline int flexcan_chip_stop(struct net_device *dev)
+{
+	return __flexcan_chip_stop(dev, false);
 }
 
 static int flexcan_open(struct net_device *dev)
@@ -1129,7 +1151,7 @@ static int flexcan_close(struct net_device *dev)
 
 	netif_stop_queue(dev);
 	can_rx_offload_disable(&priv->offload);
-	flexcan_chip_stop(dev);
+	flexcan_chip_stop_disable_on_error(dev);
 
 	free_irq(dev->irq, dev);
 	clk_disable_unprepare(priv->clk_per);
-- 
2.25.1

[PATCH 4.14 166/191] ath9k: hif_usb: fix race condition between usb_get_urb() and usb_kill_anchored_urbs()

[Greg Kroah-Hartman]

From: Brooke Basile <brookebasile@gmail.com>

[ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ]

Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor
systems create a race condition in which usb_kill_anchored_urbs() deallocates
the URB before the completer callback is called in usb_kill_urb(), resulting
in a use-after-free.
To fix this, add proper lock protection to usb_kill_urb() calls that can
possibly run concurrently with usb_kill_anchored_urbs().

Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index e80d509bc5415..ce3a785212740 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -447,10 +447,19 @@ static void hif_usb_stop(void *hif_handle)
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	/* The pending URBs have to be canceled. */
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
+		list_del(&tx_buf->list);
+		usb_free_urb(tx_buf->urb);
+		kfree(tx_buf->buf);
+		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
 }
@@ -760,27 +769,37 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 	struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
 	unsigned long flags;
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_buf, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
 		list_del(&tx_buf->list);
 		usb_free_urb(tx_buf->urb);
 		kfree(tx_buf->buf);
 		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	hif_dev->tx.flags |= HIF_USB_TX_FLUSH;
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
+		usb_get_urb(tx_buf->urb);
+		spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 		usb_kill_urb(tx_buf->urb);
 		list_del(&tx_buf->list);
 		usb_free_urb(tx_buf->urb);
 		kfree(tx_buf->buf);
 		kfree(tx_buf);
+		spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
 
 	usb_kill_anchored_urbs(&hif_dev->mgmt_submitted);
 }
-- 
2.25.1

[PATCH 4.14 167/191] misc: rtsx: Fix memory leak in rtsx_pci_probe

[Greg Kroah-Hartman]

From: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>

[ Upstream commit bc28369c6189009b66d9619dd9f09bd8c684bb98 ]

When mfd_add_devices() fail, pcr->slots should also be freed. However,
the current implementation does not free the member, leading to a memory
leak.

Fix this by adding a new goto label that frees pcr->slots.

Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Link: https://lore.kernel.org/r/20200909071853.4053-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/rtsx_pcr.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 3cf69e5c57035..c9e45b6befacf 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -1268,12 +1268,14 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 	ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
 			ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
 	if (ret < 0)
-		goto disable_irq;
+		goto free_slots;
 
 	schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
 
 	return 0;
 
+free_slots:
+	kfree(pcr->slots);
 disable_irq:
 	free_irq(pcr->irq, (void *)pcr);
 disable_msi:
-- 
2.25.1

[PATCH 4.14 168/191] reiserfs: only call unlock_new_inode() if I_NEW

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit 8859bf2b1278d064a139e3031451524a49a56bd0 ]

unlock_new_inode() is only meant to be called after a new inode has
already been inserted into the hash table.  But reiserfs_new_inode() can
call it even before it has inserted the inode, triggering the WARNING in
unlock_new_inode().  Fix this by only calling unlock_new_inode() if the
inode has the I_NEW flag set, indicating that it's in the table.

This addresses the syzbot report "WARNING in unlock_new_inode"
(https://syzkaller.appspot.com/bug?extid=187510916eb6a14598f7).

Link: https://lore.kernel.org/r/20200628070057.820213-1-ebiggers@kernel.org
Reported-by: syzbot+187510916eb6a14598f7@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/inode.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 4b0fed69e0330..06c4d376b0e39 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -2160,7 +2160,8 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th,
 out_inserted_sd:
 	clear_nlink(inode);
 	th->t_trans_id = 0;	/* so the caller can't use this handle later */
-	unlock_new_inode(inode); /* OK to do even if we hadn't locked it */
+	if (inode->i_state & I_NEW)
+		unlock_new_inode(inode);
 	iput(inode);
 	return err;
 }
-- 
2.25.1

[PATCH 4.14 169/191] xfs: make sure the rt allocator doesnt run off the end

[Greg Kroah-Hartman]

From: Darrick J. Wong <darrick.wong@oracle.com>

[ Upstream commit 2a6ca4baed620303d414934aa1b7b0a8e7bab05f ]

There's an overflow bug in the realtime allocator.  If the rt volume is
large enough to handle a single allocation request that is larger than
the maximum bmap extent length and the rt bitmap ends exactly on a
bitmap block boundary, it's possible that the near allocator will try to
check the freeness of a range that extends past the end of the bitmap.
This fails with a corruption error and shuts down the fs.

Therefore, constrain maxlen so that the range scan cannot run off the
end of the rt bitmap.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_rtalloc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index cdcb7235e41ae..7d3b56872e563 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -257,6 +257,9 @@ xfs_rtallocate_extent_block(
 		end = XFS_BLOCKTOBIT(mp, bbno + 1) - 1;
 	     i <= end;
 	     i++) {
+		/* Make sure we don't scan off the end of the rt volume. */
+		maxlen = min(mp->m_sb.sb_rextents, i + maxlen) - i;
+
 		/*
 		 * See if there's a free extent of maxlen starting at i.
 		 * If it's not so then next will contain the first non-free.
@@ -448,6 +451,14 @@ xfs_rtallocate_extent_near(
 	 */
 	if (bno >= mp->m_sb.sb_rextents)
 		bno = mp->m_sb.sb_rextents - 1;
+
+	/* Make sure we don't run off the end of the rt volume. */
+	maxlen = min(mp->m_sb.sb_rextents, bno + maxlen) - bno;
+	if (maxlen < minlen) {
+		*rtblock = NULLRTBLOCK;
+		return 0;
+	}
+
 	/*
 	 * Try the exact allocation first.
 	 */
-- 
2.25.1

[PATCH 4.14 170/191] usb: ohci: Default to per-port over-current protection

[Greg Kroah-Hartman]

From: Hamish Martin <hamish.martin@alliedtelesis.co.nz>

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ]

Some integrated OHCI controller hubs do not expose all ports of the hub
to pins on the SoC. In some cases the unconnected ports generate
spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC
contains a nominally 3 port hub but only the first port is wired.

Default behaviour for ohci-platform driver is to use global over-current
protection mode (AKA "ganged"). This leads to the spurious over-current
events affecting all ports in the hub.

We now alter the default to use per-port over-current protection.

This patch results in the following configuration changes depending
on quirks:
- For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up
  for ganged power switching and no over-current protection.
- For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching
  remains at none, while over-current protection is now guaranteed to be
  set to per-port rather than the previous behaviour where it was either
  none or global over-current protection depending on the value at
  function entry.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ohci-hcd.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 4ea1530257e27..dfc24be376002 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -665,20 +665,24 @@ static int ohci_run (struct ohci_hcd *ohci)
 
 	/* handle root hub init quirks ... */
 	val = roothub_a (ohci);
-	val &= ~(RH_A_PSM | RH_A_OCPM);
+	/* Configure for per-port over-current protection by default */
+	val &= ~RH_A_NOCP;
+	val |= RH_A_OCPM;
 	if (ohci->flags & OHCI_QUIRK_SUPERIO) {
-		/* NSC 87560 and maybe others */
+		/* NSC 87560 and maybe others.
+		 * Ganged power switching, no over-current protection.
+		 */
 		val |= RH_A_NOCP;
-		val &= ~(RH_A_POTPGT | RH_A_NPS);
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
+		val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
 	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
 			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
-		 * Mac platforms.  ganged overcurrent reporting, if any.
+		 * Mac platforms.
 		 */
 		val |= RH_A_NPS;
-		ohci_writel (ohci, val, &ohci->regs->roothub.a);
 	}
+	ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
 	ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
 	ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
 						&ohci->regs->roothub.b);
-- 
2.25.1

[PATCH 4.14 171/191] Bluetooth: Only mark socket zapped after unlocking

[Greg Kroah-Hartman]

From: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>

[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ]

Since l2cap_sock_teardown_cb doesn't acquire the channel lock before
setting the socket as zapped, it could potentially race with
l2cap_sock_release which frees the socket. Thus, wait until the cleanup
is complete before marking the socket as zapped.

This race was reproduced on a JBL GO speaker after the remote device
rejected L2CAP connection due to resource unavailability.

Here is a dmesg log with debug logs from a repro of this bug:
[ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002
[ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0
[ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2
[ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001
[ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952
[ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c
[ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00
[ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4
[ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT
[ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT
[ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3
[ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6
[ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159
[ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053
[ 3465.430330]  lock: 0xffffff804410aac0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 3465.430332] Causing a watchdog bite!

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_sock.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 7ff82f97e42cc..f94b14beba2bc 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1342,8 +1342,6 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
 
 	parent = bt_sk(sk)->parent;
 
-	sock_set_flag(sk, SOCK_ZAPPED);
-
 	switch (chan->state) {
 	case BT_OPEN:
 	case BT_BOUND:
@@ -1370,8 +1368,11 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
 
 		break;
 	}
-
 	release_sock(sk);
+
+	/* Only zap after cleanup to avoid use after free race */
+	sock_set_flag(sk, SOCK_ZAPPED);
+
 }
 
 static void l2cap_sock_state_change_cb(struct l2cap_chan *chan, int state,
-- 
2.25.1

[PATCH 4.14 172/191] scsi: ibmvfc: Fix error return in ibmvfc_probe()

[Greg Kroah-Hartman]

From: Jing Xiangfeng <jingxiangfeng@huawei.com>

[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ]

Fix to return error code PTR_ERR() from the error handling case instead of
0.

Link: https://lore.kernel.org/r/20200907083949.154251-1-jingxiangfeng@huawei.com
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 34612add3829f..dbacd9830d3df 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4797,6 +4797,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	if (IS_ERR(vhost->work_thread)) {
 		dev_err(dev, "Couldn't create kernel thread: %ld\n",
 			PTR_ERR(vhost->work_thread));
+		rc = PTR_ERR(vhost->work_thread);
 		goto free_host_mem;
 	}
 
-- 
2.25.1

[PATCH 4.14 173/191] brcmsmac: fix memory leak in wlc_phy_attach_lcnphy

[Greg Kroah-Hartman]

From: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>

[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ]

When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy,
the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be
freed in the caller function.

Fix this by calling wlc_phy_detach_lcnphy in the error handler of
wlc_phy_txpwr_srom_read_lcnphy before returning.

Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200908121743.23108-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
index 93d4cde0eb313..c9f48ec46f4a1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -5090,8 +5090,10 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi)
 	pi->pi_fptr.radioloftget = wlc_lcnphy_get_radio_loft;
 	pi->pi_fptr.detach = wlc_phy_detach_lcnphy;
 
-	if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
+	if (!wlc_phy_txpwr_srom_read_lcnphy(pi)) {
+		kfree(pi->u.pi_lcnphy);
 		return false;
+	}
 
 	if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
 		if (pi_lcn->lcnphy_tempsense_option == 3) {
-- 
2.25.1

[PATCH 4.14 174/191] rtl8xxxu: prevent potential memory leak

[Greg Kroah-Hartman]

From: Chris Chiu <chiu@endlessm.com>

[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ]

Free the skb if usb_submit_urb fails on rx_urb. And free the urb
no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 63f37fa72e4ba..5cf61710ae2f1 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5453,7 +5453,6 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret) {
 		usb_unanchor_urb(urb);
-		usb_free_urb(urb);
 		goto error;
 	}
 
@@ -5462,6 +5461,7 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
 	rtl8xxxu_write32(priv, REG_USB_HIMR, val32);
 
 error:
+	usb_free_urb(urb);
 	return ret;
 }
 
@@ -5787,6 +5787,7 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw)
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct rtl8xxxu_rx_urb *rx_urb;
 	struct rtl8xxxu_tx_urb *tx_urb;
+	struct sk_buff *skb;
 	unsigned long flags;
 	int ret, i;
 
@@ -5837,6 +5838,13 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw)
 		rx_urb->hw = hw;
 
 		ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
+		if (ret) {
+			if (ret != -ENOMEM) {
+				skb = (struct sk_buff *)rx_urb->urb.context;
+				dev_kfree_skb(skb);
+			}
+			rtl8xxxu_queue_rx_urb(priv, rx_urb);
+		}
 	}
 exit:
 	/*
-- 
2.25.1

[PATCH 4.14 175/191] Fix use after free in get_capset_info callback.

[Greg Kroah-Hartman]

From: Doug Horn <doughorn@google.com>

[ Upstream commit e219688fc5c3d0d9136f8d29d7e0498388f01440 ]

If a response to virtio_gpu_cmd_get_capset_info takes longer than
five seconds to return, the callback will access freed kernel memory
in vg->capsets.

Signed-off-by: Doug Horn <doughorn@google.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200902210847.2689-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_kms.c |  2 ++
 drivers/gpu/drm/virtio/virtgpu_vq.c  | 10 +++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c
index 6400506a06b07..bed450fbb2168 100644
--- a/drivers/gpu/drm/virtio/virtgpu_kms.c
+++ b/drivers/gpu/drm/virtio/virtgpu_kms.c
@@ -113,8 +113,10 @@ static void virtio_gpu_get_capsets(struct virtio_gpu_device *vgdev,
 					 vgdev->capsets[i].id > 0, 5 * HZ);
 		if (ret == 0) {
 			DRM_ERROR("timed out waiting for cap set %d\n", i);
+			spin_lock(&vgdev->display_info_lock);
 			kfree(vgdev->capsets);
 			vgdev->capsets = NULL;
+			spin_unlock(&vgdev->display_info_lock);
 			return;
 		}
 		DRM_INFO("cap set %d: id %d, max-version %d, max-size %d\n",
diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c
index a3be65e689fd2..a956c73ea85e5 100644
--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -563,9 +563,13 @@ static void virtio_gpu_cmd_get_capset_info_cb(struct virtio_gpu_device *vgdev,
 	int i = le32_to_cpu(cmd->capset_index);
 
 	spin_lock(&vgdev->display_info_lock);
-	vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
-	vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
-	vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+	if (vgdev->capsets) {
+		vgdev->capsets[i].id = le32_to_cpu(resp->capset_id);
+		vgdev->capsets[i].max_version = le32_to_cpu(resp->capset_max_version);
+		vgdev->capsets[i].max_size = le32_to_cpu(resp->capset_max_size);
+	} else {
+		DRM_ERROR("invalid capset memory.");
+	}
 	spin_unlock(&vgdev->display_info_lock);
 	wake_up(&vgdev->resp_wq);
 }
-- 
2.25.1

[PATCH 4.14 176/191] scsi: qedi: Protect active command list to avoid list corruption

[Greg Kroah-Hartman]

From: Nilesh Javali <njavali@marvell.com>

[ Upstream commit c0650e28448d606c84f76c34333dba30f61de993 ]

Protect active command list for non-I/O commands like login response,
logout response, text response, and recovery cleanup of active list to
avoid list corruption.

Link: https://lore.kernel.org/r/20200908095657.26821-5-mrangankar@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedi/qedi_fw.c    | 8 ++++++++
 drivers/scsi/qedi/qedi_iscsi.c | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index 2e5e04a7623fa..e688300faeefd 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -62,6 +62,7 @@ static void qedi_process_logout_resp(struct qedi_ctx *qedi,
 		  "Freeing tid=0x%x for cid=0x%x\n",
 		  cmd->task_id, qedi_conn->iscsi_conn_id);
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(cmd->io_cmd_in_list)) {
 		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);
@@ -72,6 +73,7 @@ static void qedi_process_logout_resp(struct qedi_ctx *qedi,
 			  cmd->task_id, qedi_conn->iscsi_conn_id,
 			  &cmd->io_cmd);
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	cmd->state = RESPONSE_RECEIVED;
 	qedi_clear_task_idx(qedi, cmd->task_id);
@@ -127,6 +129,7 @@ static void qedi_process_text_resp(struct qedi_ctx *qedi,
 		  "Freeing tid=0x%x for cid=0x%x\n",
 		  cmd->task_id, qedi_conn->iscsi_conn_id);
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(cmd->io_cmd_in_list)) {
 		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);
@@ -137,6 +140,7 @@ static void qedi_process_text_resp(struct qedi_ctx *qedi,
 			  cmd->task_id, qedi_conn->iscsi_conn_id,
 			  &cmd->io_cmd);
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	cmd->state = RESPONSE_RECEIVED;
 	qedi_clear_task_idx(qedi, cmd->task_id);
@@ -231,11 +235,13 @@ static void qedi_process_tmf_resp(struct qedi_ctx *qedi,
 
 	tmf_hdr = (struct iscsi_tm *)qedi_cmd->task->hdr;
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(qedi_cmd->io_cmd_in_list)) {
 		qedi_cmd->io_cmd_in_list = false;
 		list_del_init(&qedi_cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	if (((tmf_hdr->flags & ISCSI_FLAG_TM_FUNC_MASK) ==
 	      ISCSI_TM_FUNC_LOGICAL_UNIT_RESET) ||
@@ -299,11 +305,13 @@ static void qedi_process_login_resp(struct qedi_ctx *qedi,
 		  ISCSI_LOGIN_RESPONSE_HDR_DATA_SEG_LEN_MASK;
 	qedi_conn->gen_pdu.resp_wr_ptr = qedi_conn->gen_pdu.resp_buf + pld_len;
 
+	spin_lock(&qedi_conn->list_lock);
 	if (likely(cmd->io_cmd_in_list)) {
 		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 	}
+	spin_unlock(&qedi_conn->list_lock);
 
 	memset(task_ctx, '\0', sizeof(*task_ctx));
 
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 4d7971c3f339b..c55fb411c8a55 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -983,11 +983,13 @@ static void qedi_cleanup_active_cmd_list(struct qedi_conn *qedi_conn)
 {
 	struct qedi_cmd *cmd, *cmd_tmp;
 
+	spin_lock(&qedi_conn->list_lock);
 	list_for_each_entry_safe(cmd, cmd_tmp, &qedi_conn->active_cmd_list,
 				 io_cmd) {
 		list_del_init(&cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 	}
+	spin_unlock(&qedi_conn->list_lock);
 }
 
 static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
-- 
2.25.1

[PATCH 4.14 177/191] scsi: qedi: Fix list_del corruption while removing active I/O

[Greg Kroah-Hartman]

From: Nilesh Javali <njavali@marvell.com>

[ Upstream commit 28b35d17f9f8573d4646dd8df08917a4076a6b63 ]

While aborting the I/O, the firmware cleanup task timed out and driver
deleted the I/O from active command list. Some time later the firmware
sent the cleanup task response and driver again deleted the I/O from
active command list causing firmware to send completion for non-existent
I/O and list_del corruption of active command list.

Add fix to check if I/O is present before deleting it from the active
command list to ensure firmware sends valid I/O completion and protect
against list_del corruption.

Link: https://lore.kernel.org/r/20200908095657.26821-4-mrangankar@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedi/qedi_fw.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qedi/qedi_fw.c b/drivers/scsi/qedi/qedi_fw.c
index e688300faeefd..e8f2c662471e0 100644
--- a/drivers/scsi/qedi/qedi_fw.c
+++ b/drivers/scsi/qedi/qedi_fw.c
@@ -844,8 +844,11 @@ static void qedi_process_cmd_cleanup_resp(struct qedi_ctx *qedi,
 			qedi_clear_task_idx(qedi_conn->qedi, rtid);
 
 			spin_lock(&qedi_conn->list_lock);
-			list_del_init(&dbg_cmd->io_cmd);
-			qedi_conn->active_cmd_count--;
+			if (likely(dbg_cmd->io_cmd_in_list)) {
+				dbg_cmd->io_cmd_in_list = false;
+				list_del_init(&dbg_cmd->io_cmd);
+				qedi_conn->active_cmd_count--;
+			}
 			spin_unlock(&qedi_conn->list_lock);
 			qedi_cmd->state = CLEANUP_RECV;
 			wake_up_interruptible(&qedi_conn->wait_queue);
@@ -1265,6 +1268,7 @@ int qedi_cleanup_all_io(struct qedi_ctx *qedi, struct qedi_conn *qedi_conn,
 		qedi_conn->cmd_cleanup_req++;
 		qedi_iscsi_cleanup_task(ctask, true);
 
+		cmd->io_cmd_in_list = false;
 		list_del_init(&cmd->io_cmd);
 		qedi_conn->active_cmd_count--;
 		QEDI_WARN(&qedi->dbg_ctx,
@@ -1478,8 +1482,11 @@ static void qedi_tmf_work(struct work_struct *work)
 	spin_unlock_bh(&qedi_conn->tmf_work_lock);
 
 	spin_lock(&qedi_conn->list_lock);
-	list_del_init(&cmd->io_cmd);
-	qedi_conn->active_cmd_count--;
+	if (likely(cmd->io_cmd_in_list)) {
+		cmd->io_cmd_in_list = false;
+		list_del_init(&cmd->io_cmd);
+		qedi_conn->active_cmd_count--;
+	}
 	spin_unlock(&qedi_conn->list_lock);
 
 	clear_bit(QEDI_CONN_FW_CLEANUP, &qedi_conn->flags);
-- 
2.25.1

[PATCH 4.14 178/191] tty: ipwireless: fix error handling

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit db332356222d9429731ab9395c89cca403828460 ]

ipwireless_send_packet() can only return 0 on success and -ENOMEM on
error, the caller should check non zero for error condition

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20200821161942.36589-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/ipwireless/network.c | 4 ++--
 drivers/tty/ipwireless/tty.c     | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index 695439c031474..abc737ae81d1c 100644
--- a/drivers/tty/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
@@ -117,7 +117,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 					       skb->len,
 					       notify_packet_sent,
 					       network);
-			if (ret == -1) {
+			if (ret < 0) {
 				skb_pull(skb, 2);
 				return 0;
 			}
@@ -134,7 +134,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel,
 					       notify_packet_sent,
 					       network);
 			kfree(buf);
-			if (ret == -1)
+			if (ret < 0)
 				return 0;
 		}
 		kfree_skb(skb);
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index 1ef751c27ac6d..cb04971843306 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -218,7 +218,7 @@ static int ipw_write(struct tty_struct *linux_tty,
 	ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS,
 			       buf, count,
 			       ipw_write_packet_sent_callback, tty);
-	if (ret == -1) {
+	if (ret < 0) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return 0;
 	}
-- 
2.25.1

[PATCH 4.14 179/191] ipvs: Fix uninit-value in do_ip_vs_set_ctl()

[Greg Kroah-Hartman]

From: Peilin Ye <yepeilin.cs@gmail.com>

[ Upstream commit c5a8a8498eed1c164afc94f50a939c1a10abf8ad ]

do_ip_vs_set_ctl() is referencing uninitialized stack value when `len` is
zero. Fix it.

Reported-by: syzbot+23b5f9e7caf61d9a3898@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=46ebfb92a8a812621a001ef04d90dfa459520fe2
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 5ec80818ace2c..c1672ff009637 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2425,6 +2425,10 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 		/* Set timeout values for (tcp tcpfin udp) */
 		ret = ip_vs_set_timeout(ipvs, (struct ip_vs_timeout_user *)arg);
 		goto out_unlock;
+	} else if (!len) {
+		/* No more commands with len == 0 below */
+		ret = -EINVAL;
+		goto out_unlock;
 	}
 
 	usvc_compat = (struct ip_vs_service_user *)arg;
@@ -2501,9 +2505,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 		break;
 	case IP_VS_SO_SET_DELDEST:
 		ret = ip_vs_del_dest(svc, &udest);
-		break;
-	default:
-		ret = -EINVAL;
 	}
 
   out_unlock:
-- 
2.25.1

[PATCH 4.14 180/191] reiserfs: Fix memory leak in reiserfs_parse_options()

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit e9d4709fcc26353df12070566970f080e651f0c9 ]

When a usrjquota or grpjquota mount option is used multiple times, we
will leak memory allocated for the file name. Make sure the last setting
is used and all the previous ones are properly freed.

Reported-by: syzbot+c9e294bbe0333a6b7640@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/reiserfs/super.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 9caf3948417c0..fbae5f4eea09c 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1264,6 +1264,10 @@ static int reiserfs_parse_options(struct super_block *s,
 						 "turned on.");
 				return 0;
 			}
+			if (qf_names[qtype] !=
+			    REISERFS_SB(s)->s_qf_names[qtype])
+				kfree(qf_names[qtype]);
+			qf_names[qtype] = NULL;
 			if (*arg) {	/* Some filename specified? */
 				if (REISERFS_SB(s)->s_qf_names[qtype]
 				    && strcmp(REISERFS_SB(s)->s_qf_names[qtype],
@@ -1293,10 +1297,6 @@ static int reiserfs_parse_options(struct super_block *s,
 				else
 					*mount_options |= 1 << REISERFS_GRPQUOTA;
 			} else {
-				if (qf_names[qtype] !=
-				    REISERFS_SB(s)->s_qf_names[qtype])
-					kfree(qf_names[qtype]);
-				qf_names[qtype] = NULL;
 				if (qtype == USRQUOTA)
 					*mount_options &= ~(1 << REISERFS_USRQUOTA);
 				else
-- 
2.25.1

[PATCH 4.14 181/191] mwifiex: dont call del_timer_sync() on uninitialized timer

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 621a3a8b1c0ecf16e1e5667ea5756a76a082b738 ]

syzbot is reporting that del_timer_sync() is called from
mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without
checking timer_setup() from mwifiex_usb_tx_init() was called [1].

Ganapathi Bhat proposed a possibly cleaner fix, but it seems that
that fix was forgotten [2].

"grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that
currently there are 28 locations which call del_timer[_sync]() only if
that timer's function field was initialized (because timer_setup() sets
that timer's function field). Therefore, let's use same approach here.

[1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959
[2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com

Reported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/usb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 50890cab8807b..44d5005188c93 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -1335,7 +1335,8 @@ static void mwifiex_usb_cleanup_tx_aggr(struct mwifiex_adapter *adapter)
 				skb_dequeue(&port->tx_aggr.aggr_list)))
 				mwifiex_write_data_complete(adapter, skb_tmp,
 							    0, -1);
-		del_timer_sync(&port->tx_aggr.timer_cnxt.hold_timer);
+		if (port->tx_aggr.timer_cnxt.hold_timer.function)
+			del_timer_sync(&port->tx_aggr.timer_cnxt.hold_timer);
 		port->tx_aggr.timer_cnxt.is_hold_timer_set = false;
 		port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0;
 	}
-- 
2.25.1

[PATCH 4.14 182/191] brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach

[Greg Kroah-Hartman]

From: Wang Yufen <wangyufen@huawei.com>

[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ]

When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL,
we should destroy the workqueue.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
index 65e16e3646ecf..5f0af5fac343d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -1538,6 +1538,8 @@ int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
 					  BRCMF_TX_IOCTL_MAX_MSG_SIZE,
 					  msgbuf->ioctbuf,
 					  msgbuf->ioctbuf_handle);
+		if (msgbuf->txflow_wq)
+			destroy_workqueue(msgbuf->txflow_wq);
 		kfree(msgbuf);
 	}
 	return -ENOMEM;
-- 
2.25.1

[PATCH 4.14 183/191] usb: core: Solve race condition in anchor cleanup functions

[Greg Kroah-Hartman]

From: Eli Billauer <eli.billauer@gmail.com>

[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ]

usb_kill_anchored_urbs() is commonly used to cancel all URBs on an
anchor just before releasing resources which the URBs rely on. By doing
so, users of this function rely on that no completer callbacks will take
place from any URB on the anchor after it returns.

However if this function is called in parallel with __usb_hcd_giveback_urb
processing a URB on the anchor, the latter may call the completer
callback after usb_kill_anchored_urbs() returns. This can lead to a
kernel panic due to use after release of memory in interrupt context.

The race condition is that __usb_hcd_giveback_urb() first unanchors the URB
and then makes the completer callback. Such URB is hence invisible to
usb_kill_anchored_urbs(), allowing it to return before the completer has
been called, since the anchor's urb_list is empty.

Even worse, if the racing completer callback resubmits the URB, it may
remain in the system long after usb_kill_anchored_urbs() returns.

Hence list_empty(&anchor->urb_list), which is used in the existing
while-loop, doesn't reliably ensure that all URBs of the anchor are gone.

A similar problem exists with usb_poison_anchored_urbs() and
usb_scuttle_anchored_urbs().

This patch adds an external do-while loop, which ensures that all URBs
are indeed handled before these three functions return. This change has
no effect at all unless the race condition occurs, in which case the
loop will busy-wait until the racing completer callback has finished.
This is a rare condition, so the CPU waste of this spinning is
negligible.

The additional do-while loop relies on usb_anchor_check_wakeup(), which
returns true iff the anchor list is empty, and there is no
__usb_hcd_giveback_urb() in the system that is in the middle of the
unanchor-before-complete phase. The @suspend_wakeups member of
struct usb_anchor is used for this purpose, which was introduced to solve
another problem which the same race condition causes, in commit
6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up
till completion is done").

The surely_empty variable is necessary, because usb_anchor_check_wakeup()
must be called with the lock held to prevent races. However the spinlock
must be released and reacquired if the outer loop spins with an empty
URB list while waiting for the unanchor-before-complete passage to finish:
The completer callback may very well attempt to take the very same lock.

To summarize, using usb_anchor_check_wakeup() means that the patched
functions can return only when the anchor's list is empty, and there is
no invisible URB being processed. Since the inner while loop finishes on
the empty list condition, the new do-while loop will terminate as well,
except for when the said race condition occurs.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200731054650.30644-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/urb.c | 89 +++++++++++++++++++++++++-----------------
 1 file changed, 54 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 83bd48734af58..bd6ebc9d17c8c 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -767,11 +767,12 @@ void usb_block_urb(struct urb *urb)
 EXPORT_SYMBOL_GPL(usb_block_urb);
 
 /**
- * usb_kill_anchored_urbs - cancel transfer requests en masse
+ * usb_kill_anchored_urbs - kill all URBs associated with an anchor
  * @anchor: anchor the requests are bound to
  *
- * this allows all outstanding URBs to be killed starting
- * from the back of the queue
+ * This kills all outstanding URBs starting from the back of the queue,
+ * with guarantee that no completer callbacks will take place from the
+ * anchor after this function returns.
  *
  * This routine should not be called by a driver after its disconnect
  * method has returned.
@@ -779,20 +780,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb);
 void usb_kill_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	int surely_empty;
 
-	spin_lock_irq(&anchor->lock);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		/* we must make sure the URB isn't freed before we kill it*/
-		usb_get_urb(victim);
-		spin_unlock_irq(&anchor->lock);
-		/* this will unanchor the URB */
-		usb_kill_urb(victim);
-		usb_put_urb(victim);
+	do {
 		spin_lock_irq(&anchor->lock);
-	}
-	spin_unlock_irq(&anchor->lock);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_kill_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
 }
 EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 
@@ -811,21 +818,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 void usb_poison_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	int surely_empty;
 
-	spin_lock_irq(&anchor->lock);
-	anchor->poisoned = 1;
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		/* we must make sure the URB isn't freed before we kill it*/
-		usb_get_urb(victim);
-		spin_unlock_irq(&anchor->lock);
-		/* this will unanchor the URB */
-		usb_poison_urb(victim);
-		usb_put_urb(victim);
+	do {
 		spin_lock_irq(&anchor->lock);
-	}
-	spin_unlock_irq(&anchor->lock);
+		anchor->poisoned = 1;
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			/* make sure the URB isn't freed before we kill it */
+			usb_get_urb(victim);
+			spin_unlock_irq(&anchor->lock);
+			/* this will unanchor the URB */
+			usb_poison_urb(victim);
+			usb_put_urb(victim);
+			spin_lock_irq(&anchor->lock);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
+
+		spin_unlock_irq(&anchor->lock);
+		cpu_relax();
+	} while (!surely_empty);
 }
 EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
 
@@ -965,14 +978,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
 	unsigned long flags;
+	int surely_empty;
+
+	do {
+		spin_lock_irqsave(&anchor->lock, flags);
+		while (!list_empty(&anchor->urb_list)) {
+			victim = list_entry(anchor->urb_list.prev,
+					    struct urb, anchor_list);
+			__usb_unanchor_urb(victim, anchor);
+		}
+		surely_empty = usb_anchor_check_wakeup(anchor);
 
-	spin_lock_irqsave(&anchor->lock, flags);
-	while (!list_empty(&anchor->urb_list)) {
-		victim = list_entry(anchor->urb_list.prev, struct urb,
-				    anchor_list);
-		__usb_unanchor_urb(victim, anchor);
-	}
-	spin_unlock_irqrestore(&anchor->lock, flags);
+		spin_unlock_irqrestore(&anchor->lock, flags);
+		cpu_relax();
+	} while (!surely_empty);
 }
 
 EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
-- 
2.25.1

[PATCH 4.14 184/191] scsi: ufs: ufs-qcom: Fix race conditions caused by ufs_qcom_testbus_config()

[Greg Kroah-Hartman]

From: Can Guo <cang@codeaurora.org>

[ Upstream commit 89dd87acd40a44de8ff3358138aedf8f73f4efc6 ]

If ufs_qcom_dump_dbg_regs() calls ufs_qcom_testbus_config() from
ufshcd_suspend/resume and/or clk gate/ungate context, pm_runtime_get_sync()
and ufshcd_hold() will cause a race condition. Fix this by removing the
unnecessary calls of pm_runtime_get_sync() and ufshcd_hold().

Link: https://lore.kernel.org/r/1596975355-39813-3-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-qcom.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index ee3589ac64abf..6b6b8bf2ec929 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1595,9 +1595,6 @@ int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
 	 */
 	}
 	mask <<= offset;
-
-	pm_runtime_get_sync(host->hba->dev);
-	ufshcd_hold(host->hba, false);
 	ufshcd_rmwl(host->hba, TEST_BUS_SEL,
 		    (u32)host->testbus.select_major << 19,
 		    REG_UFS_CFG1);
@@ -1610,8 +1607,6 @@ int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
 	 * committed before returning.
 	 */
 	mb();
-	ufshcd_release(host->hba);
-	pm_runtime_put_sync(host->hba->dev);
 
 	return 0;
 }
-- 
2.25.1

[PATCH 4.14 185/191] ath10k: check idx validity in __ath10k_htt_rx_ring_fill_n()

[Greg Kroah-Hartman]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ]

The idx in __ath10k_htt_rx_ring_fill_n function lives in
consistent dma region writable by the device. Malfunctional
or malicious device could manipulate such idx to have a OOB
write. Either by
    htt->rx_ring.netbufs_ring[idx] = skb;
or by
    ath10k_htt_set_paddrs_ring(htt, paddr, idx);

The idx can also be negative as it's signed, giving a large
memory space to write to.

It's possibly exploitable by corruptting a legit pointer with
a skb pointer. And then fill skb with payload as rougue object.

Part of the log here. Sometimes it appears as UAF when writing
to a freed memory by chance.

 [   15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0
 [   15.595483] #PF: supervisor write access in kernel mode
 [   15.596250] #PF: error_code(0x0002) - not-present page
 [   15.597013] PGD 0 P4D 0
 [   15.597395] Oops: 0002 [#1] SMP KASAN PTI
 [   15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69
 [   15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
 BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 [   15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
 [   15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n
 (linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 21642bab485a1..fd276e54bb7c2 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -100,6 +100,14 @@ static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
 	BUILD_BUG_ON(HTT_RX_RING_FILL_LEVEL >= HTT_RX_RING_SIZE / 2);
 
 	idx = __le32_to_cpu(*htt->rx_ring.alloc_idx.vaddr);
+
+	if (idx < 0 || idx >= htt->rx_ring.size) {
+		ath10k_err(htt->ar, "rx ring index is not valid, firmware malfunctioning?\n");
+		idx &= htt->rx_ring.size_mask;
+		ret = -ENOMEM;
+		goto fail;
+	}
+
 	while (num > 0) {
 		skb = dev_alloc_skb(HTT_RX_BUF_SIZE + HTT_RX_DESC_ALIGN);
 		if (!skb) {
-- 
2.25.1

[PATCH 4.14 186/191] net: korina: cast KSEG0 address to pointer in kfree

[Greg Kroah-Hartman]

From: Valentin Vidic <vvidic@valentin-vidic.from.hr>

[ Upstream commit 3bd57b90554b4bb82dce638e0668ef9dc95d3e96 ]

Fixes gcc warning:

passing argument 1 of 'kfree' makes pointer from integer without a cast

Fixes: 3af5f0f5c74e ("net: korina: fix kfree of rx/tx descriptor array")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Link: https://lore.kernel.org/r/20201018184255.28989-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/korina.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index 1357d464e8c43..1eccdbaa9a515 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -1188,7 +1188,7 @@ static int korina_probe(struct platform_device *pdev)
 	return rc;
 
 probe_err_register:
-	kfree(KSEG0ADDR(lp->td_ring));
+	kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
 probe_err_td_ring:
 	iounmap(lp->tx_dma_regs);
 probe_err_dma_tx:
@@ -1208,7 +1208,7 @@ static int korina_remove(struct platform_device *pdev)
 	iounmap(lp->eth_regs);
 	iounmap(lp->rx_dma_regs);
 	iounmap(lp->tx_dma_regs);
-	kfree(KSEG0ADDR(lp->td_ring));
+	kfree((struct dma_desc *)KSEG0ADDR(lp->td_ring));
 
 	unregister_netdev(bif->dev);
 	free_netdev(bif->dev);
-- 
2.25.1

[PATCH 4.14 187/191] tty: serial: fsl_lpuart: fix lpuart32_poll_get_char

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

commit 29788ab1d2bf26c130de8f44f9553ee78a27e8d5 upstream.

The watermark is set to 1, so we need to input two chars to trigger RDRF
using the original logic. With the new logic, we could always get the
char when there is data in FIFO.

Suggested-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20200929095509.21680-1-peng.fan@nxp.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/fsl_lpuart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -567,7 +567,7 @@ static void lpuart32_poll_put_char(struc
 
 static int lpuart32_poll_get_char(struct uart_port *port)
 {
-	if (!(lpuart32_read(port, UARTSTAT) & UARTSTAT_RDRF))
+	if (!(lpuart32_read(port, UARTWATER) >> UARTWATER_RXCNT_OFF))
 		return NO_POLL_CHAR;
 
 	return lpuart32_read(port, UARTDATA);

[PATCH 4.14 188/191] usb: cdc-acm: add quirk to blacklist ETAS ES58X devices

[Greg Kroah-Hartman]

From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>

commit a4f88430af896bf34ec25a7a5f0e053fb3d928e0 upstream.

The ES58X devices has a CDC ACM interface (used for debug
purpose). During probing, the device is thus recognized as USB Modem
(CDC ACM), preventing the etas-es58x module to load:
  usbcore: registered new interface driver etas_es58x
  usb 1-1.1: new full-speed USB device number 14 using xhci_hcd
  usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00
  usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  usb 1-1.1: Product: ES581.4
  usb 1-1.1: Manufacturer: ETAS GmbH
  usb 1-1.1: SerialNumber: 2204355
  cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device
  cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device

Thus, these have been added to the ignore list in
drivers/usb/class/cdc-acm.c

N.B. Future firmware release of the ES58X will remove the CDC-ACM
interface.

`lsusb -v` of the three devices variant (ES581.4, ES582.1 and
ES584.1):

  Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               1.10
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x108c Robert Bosch GmbH
    idProduct          0x0159
    bcdDevice            1.00
    iManufacturer           1 ETAS GmbH
    iProduct                2 ES581.4
    iSerial                 3 2204355
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength       0x0035
      bNumInterfaces          1
      bConfigurationValue     1
      iConfiguration          5 Bus Powered Configuration
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              100mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           3
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      0
        iInterface              4 ACM Control Interface
        CDC Header:
          bcdCDC               1.10
        CDC Call Management:
          bmCapabilities       0x01
            call management
          bDataInterface          0
        CDC ACM:
          bmCapabilities       0x06
            sends break
            line coding and serial state
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0010  1x 16 bytes
          bInterval              10
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x82  EP 2 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x03  EP 3 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
  Device Status:     0x0000
    (Bus Powered)

  Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x108c Robert Bosch GmbH
    idProduct          0x0168
    bcdDevice            1.00
    iManufacturer           1 ETAS GmbH
    iProduct                2 ES582
    iSerial                 3 0108933
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength       0x0043
      bNumInterfaces          2
      bConfigurationValue     1
      iConfiguration          0
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              500mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           1
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      1 AT-commands (v.25ter)
        iInterface              0
        CDC Header:
          bcdCDC               1.10
        CDC ACM:
          bmCapabilities       0x02
            line coding and serial state
        CDC Union:
          bMasterInterface        0
          bSlaveInterface         1
        CDC Call Management:
          bmCapabilities       0x03
            call management
            use DataInterface
          bDataInterface          1
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x83  EP 3 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval              16
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        1
        bAlternateSetting       0
        bNumEndpoints           2
        bInterfaceClass        10 CDC Data
        bInterfaceSubClass      0
        bInterfaceProtocol      0
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x02  EP 2 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
  Device Qualifier (for other device speed):
    bLength                10
    bDescriptorType         6
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    bNumConfigurations      1
  Device Status:     0x0000
    (Bus Powered)

  Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x108c Robert Bosch GmbH
    idProduct          0x0169
    bcdDevice            1.00
    iManufacturer           1 ETAS GmbH
    iProduct                2 ES584.1
    iSerial                 3 0100320
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength       0x0043
      bNumInterfaces          2
      bConfigurationValue     1
      iConfiguration          0
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              500mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           1
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      1 AT-commands (v.25ter)
        iInterface              0
        CDC Header:
          bcdCDC               1.10
        CDC ACM:
          bmCapabilities       0x02
            line coding and serial state
        CDC Union:
          bMasterInterface        0
          bSlaveInterface         1
        CDC Call Management:
          bmCapabilities       0x03
            call management
            use DataInterface
          bDataInterface          1
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x83  EP 3 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval              16
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        1
        bAlternateSetting       0
        bNumEndpoints           2
        bInterfaceClass        10 CDC Data
        bInterfaceSubClass      0
        bInterfaceProtocol      0
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x02  EP 2 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0200  1x 512 bytes
          bInterval               0
  Device Qualifier (for other device speed):
    bLength                10
    bDescriptorType         6
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    bNumConfigurations      1
  Device Status:     0x0000
    (Bus Powered)

Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201002154219.4887-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1957,6 +1957,17 @@ static const struct usb_device_id acm_id
 	.driver_info = IGNORE_DEVICE,
 	},
 
+	/* Exclude ETAS ES58x */
+	{ USB_DEVICE(0x108c, 0x0159), /* ES581.4 */
+	.driver_info = IGNORE_DEVICE,
+	},
+	{ USB_DEVICE(0x108c, 0x0168), /* ES582.1 */
+	.driver_info = IGNORE_DEVICE,
+	},
+	{ USB_DEVICE(0x108c, 0x0169), /* ES584.1 */
+	.driver_info = IGNORE_DEVICE,
+	},
+
 	{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
 	.driver_info = SEND_ZERO_PACKET,
 	},

[PATCH 4.14 189/191] USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 37d2a36394d954413a495da61da1b2a51ecd28ab upstream.

syzbot is reporting hung task at wdm_flush() [1], for there is a circular
dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever
waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget
cannot be called unless close() for /dev/cdc-wdm0 completes.

Tetsuo Handa considered that such circular dependency is an usage error [2]
which corresponds to an unresponding broken hardware [3]. But Alan Stern
responded that we should be prepared for such hardware [4]. Therefore,
this patch changes wdm_flush() to use wait_event_interruptible_timeout()
which gives up after 30 seconds, for hardware that remains silent must be
ignored. The 30 seconds are coming out of thin air.

Changing wait_event() to wait_event_interruptible_timeout() makes error
reporting from close() syscall less reliable. To compensate it, this patch
also implements wdm_fsync() which does not use timeout. Those who want to
be very sure that data has gone out to the device are now advised to call
fsync(), with a caveat that fsync() can return -EINVAL when running on
older kernels which do not implement wdm_fsync().

This patch also fixes three more problems (listed below) found during
exhaustive discussion and testing.

  Since multiple threads can concurrently call wdm_write()/wdm_flush(),
  we need to use wake_up_all() whenever clearing WDM_IN_USE in order to
  make sure that all waiters are woken up. Also, error reporting needs
  to use fetch-and-clear approach in order not to report same error for
  multiple times.

  Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well
  check WDM_DISCONNECTING.

  In wdm_flush(), since locks are not held, it is not safe to dereference
  desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus,
  remove dev_err() from wdm_flush().

[1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186
[2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp
[3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp
[4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu
[5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp

Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com>
Cc: stable <stable@vger.kernel.org>
Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-wdm.c |   70 +++++++++++++++++++++++++++++++++-----------
 1 file changed, 54 insertions(+), 16 deletions(-)

--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -57,6 +57,9 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 
 #define WDM_MAX			16
 
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT	(30 * HZ)
+
 /* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
 #define WDM_DEFAULT_BUFSIZE	256
 
@@ -147,7 +150,7 @@ static void wdm_out_callback(struct urb
 	kfree(desc->outbuf);
 	desc->outbuf = NULL;
 	clear_bit(WDM_IN_USE, &desc->flags);
-	wake_up(&desc->wait);
+	wake_up_all(&desc->wait);
 }
 
 /* forward declaration */
@@ -390,6 +393,9 @@ static ssize_t wdm_write
 	if (test_bit(WDM_RESETTING, &desc->flags))
 		r = -EIO;
 
+	if (test_bit(WDM_DISCONNECTING, &desc->flags))
+		r = -ENODEV;
+
 	if (r < 0) {
 		rv = r;
 		goto out_free_mem_pm;
@@ -421,6 +427,7 @@ static ssize_t wdm_write
 	if (rv < 0) {
 		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
+		wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
 		rv = usb_translate_errors(rv);
 		goto out_free_mem_pm;
@@ -580,28 +587,58 @@ err:
 	return rv;
 }
 
-static int wdm_flush(struct file *file, fl_owner_t id)
+static int wdm_wait_for_response(struct file *file, long timeout)
 {
 	struct wdm_device *desc = file->private_data;
+	long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
 
-	wait_event(desc->wait,
-			/*
-			 * needs both flags. We cannot do with one
-			 * because resetting it would cause a race
-			 * with write() yet we need to signal
-			 * a disconnect
-			 */
-			!test_bit(WDM_IN_USE, &desc->flags) ||
-			test_bit(WDM_DISCONNECTING, &desc->flags));
+	/*
+	 * Needs both flags. We cannot do with one because resetting it would
+	 * cause a race with write() yet we need to signal a disconnect.
+	 */
+	rv = wait_event_interruptible_timeout(desc->wait,
+			      !test_bit(WDM_IN_USE, &desc->flags) ||
+			      test_bit(WDM_DISCONNECTING, &desc->flags),
+			      timeout);
 
-	/* cannot dereference desc->intf if WDM_DISCONNECTING */
+	/*
+	 * To report the correct error. This is best effort.
+	 * We are inevitably racing with the hardware.
+	 */
 	if (test_bit(WDM_DISCONNECTING, &desc->flags))
 		return -ENODEV;
-	if (desc->werr < 0)
-		dev_err(&desc->intf->dev, "Error in flush path: %d\n",
-			desc->werr);
+	if (!rv)
+		return -EIO;
+	if (rv < 0)
+		return -EINTR;
+
+	spin_lock_irq(&desc->iuspin);
+	rv = desc->werr;
+	desc->werr = 0;
+	spin_unlock_irq(&desc->iuspin);
+
+	return usb_translate_errors(rv);
+
+}
 
-	return usb_translate_errors(desc->werr);
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+	return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
+
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+	return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
 }
 
 static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)
@@ -726,6 +763,7 @@ static const struct file_operations wdm_
 	.owner =	THIS_MODULE,
 	.read =		wdm_read,
 	.write =	wdm_write,
+	.fsync =	wdm_fsync,
 	.open =		wdm_open,
 	.flush =	wdm_flush,
 	.release =	wdm_release,

[PATCH 4.14 190/191] eeprom: at25: set minimum read/write access stride to 1

[Greg Kroah-Hartman]

From: Christian Eggers <ceggers@arri.de>

commit 284f52ac1c6cfa1b2e5c11b84653dd90e4e91de7 upstream.

SPI eeproms are addressed by byte.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728092959.24600-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/eeprom/at25.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -355,7 +355,7 @@ static int at25_probe(struct spi_device
 	at25->nvmem_config.reg_read = at25_ee_read;
 	at25->nvmem_config.reg_write = at25_ee_write;
 	at25->nvmem_config.priv = at25;
-	at25->nvmem_config.stride = 4;
+	at25->nvmem_config.stride = 1;
 	at25->nvmem_config.word_size = 1;
 	at25->nvmem_config.size = chip.byte_len;
 

[PATCH 4.14 191/191] usb: gadget: f_ncm: allow using NCM in SuperSpeed Plus gadgets.

[Greg Kroah-Hartman]

From: Lorenzo Colitti <lorenzo@google.com>

[ Upstream commit 7974ecd7d3c0f42a98566f281e44ea8573a2ad88 ]

Currently, enabling f_ncm at SuperSpeed Plus speeds results in an
oops in config_ep_by_speed because ncm_set_alt passes in NULL
ssp_descriptors. Fix this by re-using the SuperSpeed descriptors.
This is safe because usb_assign_descriptors calls
usb_copy_descriptors.

Tested: enabled f_ncm on a dwc3 gadget and 10Gbps link, ran iperf
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_ncm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index fbf15ab700f49..61c0bc7c985f4 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1541,7 +1541,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
 		fs_ncm_notify_desc.bEndpointAddress;
 
 	status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
-			ncm_ss_function, NULL);
+			ncm_ss_function, ncm_ss_function);
 	if (status)
 		goto fail;
 
-- 
2.25.1

Re: [PATCH 4.14 000/191] 4.14.203-rc1 review

[Guenter Roeck]

On 10/27/20 6:47 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.203 release.
> There are 191 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000.
> Anything received after that time might be too late.
> 


Build reference: v4.14.202-192-ga42f5f48c6ae
gcc version: powerpc64-linux-gcc (GCC) 10.2.0

Building powerpc:defconfig ... failed
--------------
Error log:
arch/powerpc/platforms/powernv/opal-dump.c: In function 'process_dump':
arch/powerpc/platforms/powernv/opal-dump.c:409:7: error: void value not ignored as it ought to be
  409 |  dump = create_dump_obj(dump_id, dump_size, dump_type);

Full results will follow later.

Guenter

Re: [PATCH 4.14 000/191] 4.14.203-rc1 review

[Naresh Kamboju]

On Tue, 27 Oct 2020 at 19:40, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.203 release.
> There are 191 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.203-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.14.203-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: a42f5f48c6ae133fc827daac1a64c70c300e32bb
git describe: v4.14.202-192-ga42f5f48c6ae
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.202-192-ga42f5f48c6ae


No regressions (compared to build v4.14.202)

No fixes (compared to build v4.14.202)


Ran 21826 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-tracing-tests
* perf
* ltp-dio-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-syscalls-tests
* network-basic-tests
* v4l2-compliance
* libhugetlbfs
* ltp-containers-tests
* ltp-fs-tests

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 000/191] 4.14.203-rc1 review

[Jon Hunter]

On Tue, 27 Oct 2020 14:47:35 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.203 release.
> There are 191 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.203-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    30 tests:	30 pass, 0 fail

Linux version:	4.14.203-rc1-ga42f5f48c6ae
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 4.14 000/191] 4.14.203-rc1 review

[Guenter Roeck]

Retry.

On Wed, Oct 28, 2020 at 10:08:53AM -0700, Guenter Roeck wrote:
> On Tue, Oct 27, 2020 at 02:47:35PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.203 release.
> > There are 191 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 168 pass: 166 fail: 2
> Failed builds:
> 	powerpc:defconfig
> 	powerpc:allmodconfig
> Qemu test results:
> 	total: 404 pass: 385 fail: 19
> Failed tests:
> 	<various powerpc64>
> 
> Error log:
> arch/powerpc/platforms/powernv/opal-dump.c: In function 'process_dump':
> arch/powerpc/platforms/powernv/opal-dump.c:409:7: error: void value not ignored as it ought to be
> 
> Tested-by: Guenter Roeck <linux@roeck-us.net>
> 
> Guenter

Re: [PATCH 4.14 000/191] 4.14.203-rc1 review

[Sasha Levin]

On Wed, Oct 28, 2020 at 12:56:10PM -0700, Guenter Roeck wrote:
>Retry.
>
>On Wed, Oct 28, 2020 at 10:08:53AM -0700, Guenter Roeck wrote:
>> On Tue, Oct 27, 2020 at 02:47:35PM +0100, Greg Kroah-Hartman wrote:
>> > This is the start of the stable review cycle for the 4.14.203 release.
>> > There are 191 patches in this series, all will be posted as a response
>> > to this one.  If anyone has any issues with these being applied, please
>> > let me know.
>> >
>> > Responses should be made by Thu, 29 Oct 2020 13:48:36 +0000.
>> > Anything received after that time might be too late.
>> >
>>
>> Build results:
>> 	total: 168 pass: 166 fail: 2
>> Failed builds:
>> 	powerpc:defconfig
>> 	powerpc:allmodconfig
>> Qemu test results:
>> 	total: 404 pass: 385 fail: 19
>> Failed tests:
>> 	<various powerpc64>
>>
>> Error log:
>> arch/powerpc/platforms/powernv/opal-dump.c: In function 'process_dump':
>> arch/powerpc/platforms/powernv/opal-dump.c:409:7: error: void value not ignored as it ought to be

I'll grab b29336c0e178 ("powerpc/powernv/opal-dump : Use IRQ_HANDLED
instead of numbers in interrupt handler") to fix that, thanks!

-- 
Thanks,
Sasha

Re: [PATCH 4.14 000/191] 4.14.203-rc1 review

[Jeffrin Thalakkottoor]

hello ,

compiled and booted 4.14.203-rc1+ .
dmesg atleast throws issue or issues.

-----x----------------------x------------------------------------------x-------------------------------x-
[    1.822459] ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup
failure, AE_NOT_FOUND (20170728/dswload2-191)
[    1.822502] ACPI Exception: AE_NOT_FOUND, During name
lookup/catalog (20170728/psobject-251)
[    1.822524] ACPI Error: Method parse/execution failed
\_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170728/psparse-548)
[    1.852894] ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup
failure, AE_NOT_FOUND (20170728/dswload2-191)
[    1.852938] ACPI Exception: AE_NOT_FOUND, During name
lookup/catalog (20170728/psobject-251)
[    1.852959] ACPI Error: Method parse/execution failed
\_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170728/psparse-548)
[   19.924198] systemd[1]: Failed to find module 'autofs4'
------------------------------x--------------------------------------x----------------------------------x

Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>

-- 
software engineer
rajagiri school of engineering and technology -  autonomous

Re: [PATCH 4.14 000/191] 4.14.203-rc1 review

[Jeffrin Thalakkottoor]

hello ,

compiled and booted 4.14.203-rc1+ .
dmesg atleast throws issue or issues.

-----x----------------------x------------------------------------------x-------------------------------x-
[    1.822459] ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup
failure, AE_NOT_FOUND (20170728/dswload2-191)
[    1.822502] ACPI Exception: AE_NOT_FOUND, During name
lookup/catalog (20170728/psobject-251)
[    1.822524] ACPI Error: Method parse/execution failed
\_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170728/psparse-548)
[    1.852894] ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup
failure, AE_NOT_FOUND (20170728/dswload2-191)
[    1.852938] ACPI Exception: AE_NOT_FOUND, During name
lookup/catalog (20170728/psobject-251)
[    1.852959] ACPI Error: Method parse/execution failed
\_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170728/psparse-548)
[   19.924198] systemd[1]: Failed to find module 'autofs4'
------------------------------x--------------------------------------x----------------------------------x

Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>


-- 
software engineer
rajagiri school of engineering and technology  -  autonomous