All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Wu <michael.wu@vatics.com>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Wolfram Sang <wsa@kernel.org>, <linux-i2c@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: Morgan Chang <morgan.chang@vatics.com>,
	Michael Wu <michael.wu@vatics.com>
Subject: [PATCH 1/2] i2c: designware: call i2c_dw_read_clear_intrbits_slave() once
Date: Fri, 30 Oct 2020 16:04:19 +0800	[thread overview]
Message-ID: <20201030080420.28016-2-michael.wu@vatics.com> (raw)
In-Reply-To: <20201030080420.28016-1-michael.wu@vatics.com>

If some bits were cleared by i2c_dw_read_clear_intrbits_slave() in
i2c_dw_isr_slave() and not handled immediately, those cleared bits would
not be shown again by later i2c_dw_read_clear_intrbits_slave(). They
therefore were forgotten to be handled.

i2c_dw_read_clear_intrbits_slave() should be called once in an ISR and take
its returned state for all later handlings.

Signed-off-by: Michael Wu <michael.wu@vatics.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-slave.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 44974b53a626..13de01a0f75f 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -159,7 +159,6 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	u32 raw_stat, stat, enabled, tmp;
 	u8 val = 0, slave_activity;
 
-	regmap_read(dev->map, DW_IC_INTR_STAT, &stat);
 	regmap_read(dev->map, DW_IC_ENABLE, &enabled);
 	regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_stat);
 	regmap_read(dev->map, DW_IC_STATUS, &tmp);
@@ -168,6 +167,7 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
 		return 0;
 
+	stat = i2c_dw_read_clear_intrbits_slave(dev);
 	dev_dbg(dev->dev,
 		"%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
 		enabled, slave_activity, raw_stat, stat);
@@ -188,11 +188,9 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 						 val);
 				}
 				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
-				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			} else {
 				regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp);
 				regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &tmp);
-				stat = i2c_dw_read_clear_intrbits_slave(dev);
 			}
 			if (!i2c_slave_event(dev->slave,
 					     I2C_SLAVE_READ_REQUESTED,
@@ -207,7 +205,6 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 			regmap_read(dev->map, DW_IC_CLR_RX_DONE, &tmp);
 
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
-		stat = i2c_dw_read_clear_intrbits_slave(dev);
 		return 1;
 	}
 
@@ -219,7 +216,6 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 			dev_vdbg(dev->dev, "Byte %X acked!", val);
 	} else {
 		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
-		stat = i2c_dw_read_clear_intrbits_slave(dev);
 	}
 
 	return 1;
@@ -230,7 +226,6 @@ static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
 	struct dw_i2c_dev *dev = dev_id;
 	int ret;
 
-	i2c_dw_read_clear_intrbits_slave(dev);
 	ret = i2c_dw_irq_handler_slave(dev);
 	if (ret > 0)
 		complete(&dev->cmd_complete);
-- 
2.17.1


  reply	other threads:[~2020-10-30  8:05 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-30  8:04 [PATCH 0/2] Designware I2C slave confusing IC_INTR_STOP_DET handle Michael Wu
2020-10-30  8:04 ` Michael Wu [this message]
2020-10-30  8:04 ` [PATCH 2/2] i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED Michael Wu
2020-10-30 14:46   ` Jarkko Nikula
2020-11-03 21:03   ` Wolfram Sang
2020-11-04 10:17     ` Michael.Wu
2020-11-04 10:35       ` Wolfram Sang
2020-11-04 10:51         ` Michael.Wu
2020-11-05  9:13       ` Jarkko Nikula
  -- strict thread matches above, loose matches on Subject: below --
2020-10-16  6:04 [PATCH 1/2] i2c: designware: call i2c_dw_read_clear_intrbits_slave() once Michael Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201030080420.28016-2-michael.wu@vatics.com \
    --to=michael.wu@vatics.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=morgan.chang@vatics.com \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.