* [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
This is a resend of the combined cleanups for CONFIG_ARCH_GETTIMEOFFSET,
which gets removed, and CONFIG_LEGACY_TIMER_TICK, which replaces
CONFIG_GENERIC_CLOCKEVENTS, with the reverse meaning.
CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
platforms, with only ARM EBSA110 recently. As this has no more
known users, the first three patches remove EBSA110 along with
one platform specific driver and the ARCH_GETTIMEOFFSET
infrastructure.
When I created the patch removing CONFIG_ARCH_GETTIMEOFFSET, I also
had a look at CONFIG_GENERIC_CLOCKEVENTS, which is selected by most,
but not all, platforms today, each of the ones that lack it doing the
timer tick slightly differently.
The cleanups here make the old platforms a bit more consistent, in
multiple ways:
- rather than selecting GENERIC_CLOCKEVENTS on modern
platforms, select LEGACY_TIMER_TICK on the old ones.
- Hide some more of the internal implementation and only
provide a single common entry point for the timer tick,
which also makes the behavior more consistent.
- Remove the m68k and arm specific infrastructure pieces
and call the common helper directly from each timer
interrupt function.
I tested the series on m68k with the qemu q800 target platform, both
with the legacy_timer_tick() implementation and after converting that
to a periodic clockevent driver (not included in v2).
Since the patches touch a lot of architecture specific code, I've created
a branch in my asm-generic tree[1] and plan to send it for the v5.11 merge
window. If any maintainer has conflicting changes or wants to build on
top of my work, feel free to merge that into additional subsystem trees.
Arnd
[1] git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git \
asm-generic-timers
Arnd Bergmann (15):
ARM: remove ebsa110 platform
net: remove am79c961a driver
timekeeping: remove arch_gettimeoffset
timekeeping: add CONFIG_LEGACY_TIMER_TICK
ia64: convert to legacy_timer_tick
ARM: rpc: use legacy_timer_tick
parisc: use legacy_timer_tick
m68k: coldfire: use legacy_timer_tick()
m68k: split heartbeat out of timer function
m68k: sun3/sun3c: use legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: change remaining timers to legacy_timer_tick
m68k: remove timer_interrupt() function
timekeeping: remove xtime_update
timekeeping: default GENERIC_CLOCKEVENTS to enabled
.../time/clockevents/arch-support.txt | 8 +-
.../time/modern-timekeeping/arch-support.txt | 33 -
MAINTAINERS | 8 -
arch/alpha/Kconfig | 1 -
arch/arc/Kconfig | 1 -
arch/arm/Kconfig | 37 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 8 -
arch/arm/configs/ebsa110_defconfig | 74 --
arch/arm/include/asm/mach/time.h | 2 -
arch/arm/kernel/Makefile | 6 +-
arch/arm/kernel/time.c | 14 -
arch/arm/mach-ebsa110/Makefile | 8 -
arch/arm/mach-ebsa110/Makefile.boot | 5 -
arch/arm/mach-ebsa110/core.c | 323 --------
arch/arm/mach-ebsa110/core.h | 38 -
.../mach-ebsa110/include/mach/entry-macro.S | 33 -
arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -
arch/arm/mach-ebsa110/include/mach/io.h | 89 --
arch/arm/mach-ebsa110/include/mach/irqs.h | 17 -
arch/arm/mach-ebsa110/include/mach/memory.h | 22 -
.../mach-ebsa110/include/mach/uncompress.h | 41 -
arch/arm/mach-ebsa110/io.c | 440 ----------
arch/arm/mach-ebsa110/leds.c | 71 --
arch/arm/mach-rpc/time.c | 2 +-
arch/arm64/Kconfig | 1 -
arch/arm64/Kconfig.platforms | 1 -
arch/c6x/Kconfig | 1 -
arch/csky/Kconfig | 1 -
arch/h8300/Kconfig | 1 -
arch/hexagon/Kconfig | 1 -
arch/ia64/Kconfig | 1 +
arch/ia64/kernel/time.c | 36 +-
arch/m68k/68000/timers.c | 7 +-
arch/m68k/Kconfig.cpu | 37 +-
arch/m68k/Kconfig.machine | 11 +
arch/m68k/amiga/config.c | 11 +-
arch/m68k/apollo/config.c | 11 +-
arch/m68k/atari/config.c | 2 +-
arch/m68k/atari/time.c | 9 +-
arch/m68k/bvme6000/config.c | 9 +-
arch/m68k/coldfire/Makefile | 32 +-
arch/m68k/coldfire/pit.c | 2 +-
arch/m68k/coldfire/sltimers.c | 8 +-
arch/m68k/coldfire/timers.c | 8 +-
arch/m68k/hp300/time.c | 8 +-
arch/m68k/hp300/time.h | 2 +-
arch/m68k/include/asm/machdep.h | 12 +-
arch/m68k/kernel/setup_mm.c | 2 +-
arch/m68k/kernel/setup_no.c | 2 +-
arch/m68k/kernel/time.c | 18 +-
arch/m68k/mac/config.c | 6 +-
arch/m68k/mac/via.c | 8 +-
arch/m68k/mvme147/config.c | 9 +-
arch/m68k/mvme16x/config.c | 9 +-
arch/m68k/q40/config.c | 2 +-
arch/m68k/q40/q40ints.c | 10 +-
arch/m68k/sun3/config.c | 4 +-
arch/m68k/sun3/sun3ints.c | 3 +-
arch/m68k/sun3x/time.c | 5 +-
arch/m68k/sun3x/time.h | 2 +-
arch/microblaze/Kconfig | 1 -
arch/mips/Kconfig | 1 -
arch/nds32/Kconfig | 1 -
arch/nios2/Kconfig | 1 -
arch/openrisc/Kconfig | 1 -
arch/parisc/Kconfig | 2 +-
arch/parisc/kernel/time.c | 9 +-
arch/powerpc/Kconfig | 1 -
arch/riscv/Kconfig | 1 -
arch/s390/Kconfig | 1 -
arch/sh/Kconfig | 1 -
arch/sparc/Kconfig | 1 -
arch/um/Kconfig | 1 -
arch/x86/Kconfig | 1 -
arch/xtensa/Kconfig | 1 -
drivers/Makefile | 2 -
drivers/clocksource/Kconfig | 2 +-
drivers/net/ethernet/amd/Kconfig | 10 +-
drivers/net/ethernet/amd/Makefile | 1 -
drivers/net/ethernet/amd/am79c961a.c | 763 ------------------
drivers/net/ethernet/amd/am79c961a.h | 143 ----
drivers/watchdog/Kconfig | 2 +-
include/linux/time.h | 13 -
include/linux/timekeeping.h | 3 +-
kernel/time/Kconfig | 18 +-
kernel/time/Makefile | 1 +
kernel/time/clocksource.c | 8 -
kernel/time/tick-legacy.c | 37 +
kernel/time/timekeeping.c | 41 +-
kernel/time/timekeeping.h | 1 +
kernel/trace/Kconfig | 2 -
92 files changed, 218 insertions(+), 2453 deletions(-)
delete mode 100644 Documentation/features/time/modern-timekeeping/arch-support.txt
delete mode 100644 arch/arm/configs/ebsa110_defconfig
delete mode 100644 arch/arm/mach-ebsa110/Makefile
delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot
delete mode 100644 arch/arm/mach-ebsa110/core.c
delete mode 100644 arch/arm/mach-ebsa110/core.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-ebsa110/io.c
delete mode 100644 arch/arm/mach-ebsa110/leds.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.h
create mode 100644 kernel/time/tick-legacy.c
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Philip Blundell <philb@gnu.org>
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Sam Creasey <sammy@sammy.net>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: <linux-ia64@vger.kernel.org>
Cc: Parisc List <linux-parisc@vger.kernel.org>
Cc: linux-m68k <linux-m68k@lists.linux-m68k.org>
Cc: Linux ARM <linux-arm-kernel@lists.infradead.org>
--
2.27.0
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
This is a resend of the combined cleanups for CONFIG_ARCH_GETTIMEOFFSET,
which gets removed, and CONFIG_LEGACY_TIMER_TICK, which replaces
CONFIG_GENERIC_CLOCKEVENTS, with the reverse meaning.
CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
platforms, with only ARM EBSA110 recently. As this has no more
known users, the first three patches remove EBSA110 along with
one platform specific driver and the ARCH_GETTIMEOFFSET
infrastructure.
When I created the patch removing CONFIG_ARCH_GETTIMEOFFSET, I also
had a look at CONFIG_GENERIC_CLOCKEVENTS, which is selected by most,
but not all, platforms today, each of the ones that lack it doing the
timer tick slightly differently.
The cleanups here make the old platforms a bit more consistent, in
multiple ways:
- rather than selecting GENERIC_CLOCKEVENTS on modern
platforms, select LEGACY_TIMER_TICK on the old ones.
- Hide some more of the internal implementation and only
provide a single common entry point for the timer tick,
which also makes the behavior more consistent.
- Remove the m68k and arm specific infrastructure pieces
and call the common helper directly from each timer
interrupt function.
I tested the series on m68k with the qemu q800 target platform, both
with the legacy_timer_tick() implementation and after converting that
to a periodic clockevent driver (not included in v2).
Since the patches touch a lot of architecture specific code, I've created
a branch in my asm-generic tree[1] and plan to send it for the v5.11 merge
window. If any maintainer has conflicting changes or wants to build on
top of my work, feel free to merge that into additional subsystem trees.
Arnd
[1] git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git \
asm-generic-timers
Arnd Bergmann (15):
ARM: remove ebsa110 platform
net: remove am79c961a driver
timekeeping: remove arch_gettimeoffset
timekeeping: add CONFIG_LEGACY_TIMER_TICK
ia64: convert to legacy_timer_tick
ARM: rpc: use legacy_timer_tick
parisc: use legacy_timer_tick
m68k: coldfire: use legacy_timer_tick()
m68k: split heartbeat out of timer function
m68k: sun3/sun3c: use legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: change remaining timers to legacy_timer_tick
m68k: remove timer_interrupt() function
timekeeping: remove xtime_update
timekeeping: default GENERIC_CLOCKEVENTS to enabled
.../time/clockevents/arch-support.txt | 8 +-
.../time/modern-timekeeping/arch-support.txt | 33 -
MAINTAINERS | 8 -
arch/alpha/Kconfig | 1 -
arch/arc/Kconfig | 1 -
arch/arm/Kconfig | 37 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 8 -
arch/arm/configs/ebsa110_defconfig | 74 --
arch/arm/include/asm/mach/time.h | 2 -
arch/arm/kernel/Makefile | 6 +-
arch/arm/kernel/time.c | 14 -
arch/arm/mach-ebsa110/Makefile | 8 -
arch/arm/mach-ebsa110/Makefile.boot | 5 -
arch/arm/mach-ebsa110/core.c | 323 --------
arch/arm/mach-ebsa110/core.h | 38 -
.../mach-ebsa110/include/mach/entry-macro.S | 33 -
arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -
arch/arm/mach-ebsa110/include/mach/io.h | 89 --
arch/arm/mach-ebsa110/include/mach/irqs.h | 17 -
arch/arm/mach-ebsa110/include/mach/memory.h | 22 -
.../mach-ebsa110/include/mach/uncompress.h | 41 -
arch/arm/mach-ebsa110/io.c | 440 ----------
arch/arm/mach-ebsa110/leds.c | 71 --
arch/arm/mach-rpc/time.c | 2 +-
arch/arm64/Kconfig | 1 -
arch/arm64/Kconfig.platforms | 1 -
arch/c6x/Kconfig | 1 -
arch/csky/Kconfig | 1 -
arch/h8300/Kconfig | 1 -
arch/hexagon/Kconfig | 1 -
arch/ia64/Kconfig | 1 +
arch/ia64/kernel/time.c | 36 +-
arch/m68k/68000/timers.c | 7 +-
arch/m68k/Kconfig.cpu | 37 +-
arch/m68k/Kconfig.machine | 11 +
arch/m68k/amiga/config.c | 11 +-
arch/m68k/apollo/config.c | 11 +-
arch/m68k/atari/config.c | 2 +-
arch/m68k/atari/time.c | 9 +-
arch/m68k/bvme6000/config.c | 9 +-
arch/m68k/coldfire/Makefile | 32 +-
arch/m68k/coldfire/pit.c | 2 +-
arch/m68k/coldfire/sltimers.c | 8 +-
arch/m68k/coldfire/timers.c | 8 +-
arch/m68k/hp300/time.c | 8 +-
arch/m68k/hp300/time.h | 2 +-
arch/m68k/include/asm/machdep.h | 12 +-
arch/m68k/kernel/setup_mm.c | 2 +-
arch/m68k/kernel/setup_no.c | 2 +-
arch/m68k/kernel/time.c | 18 +-
arch/m68k/mac/config.c | 6 +-
arch/m68k/mac/via.c | 8 +-
arch/m68k/mvme147/config.c | 9 +-
arch/m68k/mvme16x/config.c | 9 +-
arch/m68k/q40/config.c | 2 +-
arch/m68k/q40/q40ints.c | 10 +-
arch/m68k/sun3/config.c | 4 +-
arch/m68k/sun3/sun3ints.c | 3 +-
arch/m68k/sun3x/time.c | 5 +-
arch/m68k/sun3x/time.h | 2 +-
arch/microblaze/Kconfig | 1 -
arch/mips/Kconfig | 1 -
arch/nds32/Kconfig | 1 -
arch/nios2/Kconfig | 1 -
arch/openrisc/Kconfig | 1 -
arch/parisc/Kconfig | 2 +-
arch/parisc/kernel/time.c | 9 +-
arch/powerpc/Kconfig | 1 -
arch/riscv/Kconfig | 1 -
arch/s390/Kconfig | 1 -
arch/sh/Kconfig | 1 -
arch/sparc/Kconfig | 1 -
arch/um/Kconfig | 1 -
arch/x86/Kconfig | 1 -
arch/xtensa/Kconfig | 1 -
drivers/Makefile | 2 -
drivers/clocksource/Kconfig | 2 +-
drivers/net/ethernet/amd/Kconfig | 10 +-
drivers/net/ethernet/amd/Makefile | 1 -
drivers/net/ethernet/amd/am79c961a.c | 763 ------------------
drivers/net/ethernet/amd/am79c961a.h | 143 ----
drivers/watchdog/Kconfig | 2 +-
include/linux/time.h | 13 -
include/linux/timekeeping.h | 3 +-
kernel/time/Kconfig | 18 +-
kernel/time/Makefile | 1 +
kernel/time/clocksource.c | 8 -
kernel/time/tick-legacy.c | 37 +
kernel/time/timekeeping.c | 41 +-
kernel/time/timekeeping.h | 1 +
kernel/trace/Kconfig | 2 -
92 files changed, 218 insertions(+), 2453 deletions(-)
delete mode 100644 Documentation/features/time/modern-timekeeping/arch-support.txt
delete mode 100644 arch/arm/configs/ebsa110_defconfig
delete mode 100644 arch/arm/mach-ebsa110/Makefile
delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot
delete mode 100644 arch/arm/mach-ebsa110/core.c
delete mode 100644 arch/arm/mach-ebsa110/core.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-ebsa110/io.c
delete mode 100644 arch/arm/mach-ebsa110/leds.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.h
create mode 100644 kernel/time/tick-legacy.c
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Philip Blundell <philb@gnu.org>
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Sam Creasey <sammy@sammy.net>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: <linux-ia64@vger.kernel.org>
Cc: Parisc List <linux-parisc@vger.kernel.org>
Cc: linux-m68k <linux-m68k@lists.linux-m68k.org>
Cc: Linux ARM <linux-arm-kernel@lists.infradead.org>
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH v2 01/15] ARM: remove ebsa110 platform
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Russell King
From: Arnd Bergmann <arnd@arndb.de>
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 8 -
arch/arm/Kconfig | 24 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 8 -
arch/arm/configs/ebsa110_defconfig | 74 ---
arch/arm/kernel/Makefile | 6 +-
arch/arm/mach-ebsa110/Makefile | 8 -
arch/arm/mach-ebsa110/Makefile.boot | 5 -
arch/arm/mach-ebsa110/core.c | 323 -------------
arch/arm/mach-ebsa110/core.h | 38 --
.../mach-ebsa110/include/mach/entry-macro.S | 33 --
arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -
arch/arm/mach-ebsa110/include/mach/io.h | 89 ----
arch/arm/mach-ebsa110/include/mach/irqs.h | 17 -
arch/arm/mach-ebsa110/include/mach/memory.h | 22 -
.../mach-ebsa110/include/mach/uncompress.h | 41 --
arch/arm/mach-ebsa110/io.c | 440 ------------------
arch/arm/mach-ebsa110/leds.c | 71 ---
drivers/watchdog/Kconfig | 2 +-
19 files changed, 7 insertions(+), 1229 deletions(-)
delete mode 100644 arch/arm/configs/ebsa110_defconfig
delete mode 100644 arch/arm/mach-ebsa110/Makefile
delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot
delete mode 100644 arch/arm/mach-ebsa110/core.c
delete mode 100644 arch/arm/mach-ebsa110/core.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-ebsa110/io.c
delete mode 100644 arch/arm/mach-ebsa110/leds.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e73636b75f29..12c6a9028ed2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1789,14 +1789,6 @@ F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
F: include/linux/moxtet.h
-ARM/EBSA110 MACHINE SUPPORT
-M: Russell King <linux@armlinux.org.uk>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-W: http://www.armlinux.org.uk/
-F: arch/arm/mach-ebsa110/
-F: drivers/net/ethernet/amd/am79c961a.*
-
ARM/ENERGY MICRO (SILICON LABS) EFM32 SUPPORT
M: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
R: Pengutronix Kernel Team <kernel@pengutronix.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe2f17eb2b50..1b9fda08b92f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -267,8 +267,7 @@ config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
- default 0x00000000 if ARCH_EBSA110 || \
- ARCH_FOOTBRIDGE
+ default 0x00000000 ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0xc0000000 if ARCH_SA1100
@@ -342,20 +341,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ
select USE_OF
-config ARCH_EBSA110
- bool "EBSA-110"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_SA110
- select ISA
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- select NO_IOPORT_MAP
- help
- This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an
- Ethernet interface, two PCMCIA sockets, two serial ports and a
- parallel port.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_SPARSEMEM_ENABLE
@@ -1371,7 +1356,6 @@ config ARCH_NR_GPIO
config HZ_FIXED
int
- default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0
@@ -1587,9 +1571,7 @@ config FORCE_MAX_ZONEORDER
a value of 11 means that the largest free memory block is 2^10 pages.
config ALIGNMENT_TRAP
- bool
- depends on CPU_CP15_MMU
- default y if !ARCH_EBSA110
+ def_bool CPU_CP15_MMU
select HAVE_PROC_CPU if PROC_FS
help
ARM processors cannot fetch/store information which is not
@@ -1784,7 +1766,7 @@ config CMDLINE
string "Default kernel command string"
default ""
help
- On some architectures (EBSA110 and CATS), there is currently no way
+ On some architectures (e.g. CATS), there is currently no way
for the boot loader to pass arguments to the kernel. For these
architectures, you should supply some command-line options at build
time by entering them here. As a minimum, you should specify the
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8986a91a6f31..4ff04201a8cc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1567,7 +1567,7 @@ config DEBUG_SIRFSOC_UART
config DEBUG_UART_FLOW_CONTROL
bool "Enable flow control (CTS) for the debug UART"
depends on DEBUG_LL
- default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+ default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
help
Some UART ports are connected to terminals that will use modem
control signals to indicate whether they are ready to receive text.
@@ -1639,7 +1639,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1743,7 +1743,6 @@ config DEBUG_UART_PHYS
default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
default 0xe8009000 if DEBUG_R7S9210_SCIF4
default 0xf0000000 if DEBUG_DIGICOLOR_UA0
- default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1790,7 +1789,6 @@ config DEBUG_UART_VIRT
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
default 0xe0010fe0 if ARCH_RPC
- default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4d76eab2b22d..64999d94ed1b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -172,7 +172,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
@@ -239,13 +238,6 @@ plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_VERSATILE) += versatile
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
-
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := $(textofs-y)
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
deleted file mode 100644
index 731a22a55f4e..000000000000
--- a/arch/arm/configs/ebsa110_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_ARCH_EBSA110=y
-CONFIG_PCCARD=m
-CONFIG_I82365=m
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_FASTFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_FW_LOADER=m
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AM79C961A=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_PRINTER=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 89e5d864e923..09e67cb02b20 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,7 +17,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-common.o irq.o opcodes.o \
- process.o ptrace.o reboot.o \
+ process.o ptrace.o reboot.o io.o \
setup.o signal.o sigreturn_codes.o \
stacktrace.o sys_arm.o time.o traps.o
@@ -83,10 +83,6 @@ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_VDSO) += vdso.o
obj-$(CONFIG_EFI) += efi.o
-
-ifneq ($(CONFIG_ARCH_EBSA110),y)
- obj-y += io.o
-endif
obj-$(CONFIG_PARAVIRT) += paravirt.o
head-y := head$(MMUEXT).o
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
deleted file mode 100644
index 296541315d25..000000000000
--- a/arch/arm/mach-ebsa110/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o io.o leds.o
diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot
deleted file mode 100644
index e7e98937c71b..000000000000
--- a/arch/arm/mach-ebsa110/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000400
-initrd_phys-y := 0x00800000
-
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
deleted file mode 100644
index 5960e3dfd2bf..000000000000
--- a/arch/arm/mach-ebsa110/core.c
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-ebsa110/core.c
- *
- * Copyright (C) 1998-2001 Russell King
- *
- * Extra MM routines for the EBSA-110 architecture
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/serial_8250.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-static void ebsa110_mask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MCLR);
-}
-
-static void ebsa110_unmask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MSET);
-}
-
-static struct irq_chip ebsa110_irq_chip = {
- .irq_ack = ebsa110_mask_irq,
- .irq_mask = ebsa110_mask_irq,
- .irq_unmask = ebsa110_unmask_irq,
-};
-
-static void __init ebsa110_init_irq(void)
-{
- unsigned long flags;
- unsigned int irq;
-
- local_irq_save(flags);
- __raw_writeb(0xff, IRQ_MCLR);
- __raw_writeb(0x55, IRQ_MSET);
- __raw_writeb(0x00, IRQ_MSET);
- if (__raw_readb(IRQ_MASK) != 0x55)
- while (1);
- __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */
- local_irq_restore(flags);
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
- handle_level_irq);
- irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
-
-static struct map_desc ebsa110_io_desc[] __initdata = {
- /*
- * sparse external-decode ISAIO space
- */
- { /* IRQ_STAT/IRQ_MCLR */
- .virtual = (unsigned long)IRQ_STAT,
- .pfn = __phys_to_pfn(TRICK4_PHYS),
- .length = TRICK4_SIZE,
- .type = MT_DEVICE
- }, { /* IRQ_MASK/IRQ_MSET */
- .virtual = (unsigned long)IRQ_MASK,
- .pfn = __phys_to_pfn(TRICK3_PHYS),
- .length = TRICK3_SIZE,
- .type = MT_DEVICE
- }, { /* SOFT_BASE */
- .virtual = (unsigned long)SOFT_BASE,
- .pfn = __phys_to_pfn(TRICK1_PHYS),
- .length = TRICK1_SIZE,
- .type = MT_DEVICE
- }, { /* PIT_BASE */
- .virtual = (unsigned long)PIT_BASE,
- .pfn = __phys_to_pfn(TRICK0_PHYS),
- .length = TRICK0_SIZE,
- .type = MT_DEVICE
- },
-
- /*
- * self-decode ISAIO space
- */
- {
- .virtual = ISAIO_BASE,
- .pfn = __phys_to_pfn(ISAIO_PHYS),
- .length = ISAIO_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = ISAMEM_BASE,
- .pfn = __phys_to_pfn(ISAMEM_PHYS),
- .length = ISAMEM_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init ebsa110_map_io(void)
-{
- iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
-}
-
-static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
- unsigned int flags, void *caller)
-{
- return (void __iomem *)cookie;
-}
-
-static void ebsa110_iounmap(volatile void __iomem *io_addr)
-{}
-
-static void __init ebsa110_init_early(void)
-{
- arch_ioremap_caller = ebsa110_ioremap_caller;
- arch_iounmap = ebsa110_iounmap;
-}
-
-#define PIT_CTRL (PIT_BASE + 0x0d)
-#define PIT_T2 (PIT_BASE + 0x09)
-#define PIT_T1 (PIT_BASE + 0x05)
-#define PIT_T0 (PIT_BASE + 0x01)
-
-/*
- * This is the rate at which your MCLK signal toggles (in Hz)
- * This was measured on a 10 digit frequency counter sampling
- * over 1 second.
- */
-#define MCLK 47894000
-
-/*
- * This is the rate at which the PIT timers get clocked
- */
-#define CLKBY7 (MCLK / 7)
-
-/*
- * This is the counter value. We tick at 200Hz on this platform.
- */
-#define COUNT ((CLKBY7 + (HZ / 2)) / HZ)
-
-/*
- * Get the time offset from the system PIT. Note that if we have missed an
- * interrupt, then the PIT counter will roll over (ie, be negative).
- * This actually works out to be convenient.
- */
-static u32 ebsa110_gettimeoffset(void)
-{
- unsigned long offset, count;
-
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- /*
- * If count > COUNT, make the number negative.
- */
- if (count > COUNT)
- count |= 0xffff0000;
-
- offset = COUNT;
- offset -= count;
-
- /*
- * `offset' is in units of timer counts. Convert
- * offset to units of microseconds.
- */
- offset = offset * (1000000 / HZ) / COUNT;
-
- return offset * 1000;
-}
-
-static irqreturn_t
-ebsa110_timer_interrupt(int irq, void *dev_id)
-{
- u32 count;
-
- /* latch and read timer 1 */
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- count += COUNT;
-
- __raw_writeb(count & 0xff, PIT_T1);
- __raw_writeb(count >> 8, PIT_T1);
-
- timer_tick();
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init ebsa110_timer_init(void)
-{
- int irq = IRQ_EBSA110_TIMER0;
-
- arch_gettimeoffset = ebsa110_gettimeoffset;
-
- /*
- * Timer 1, mode 2, LSB/MSB
- */
- __raw_writeb(0x70, PIT_CTRL);
- __raw_writeb(COUNT & 0xff, PIT_T1);
- __raw_writeb(COUNT >> 8, PIT_T1);
-
- if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "EBSA110 Timer Tick", NULL))
- pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .iobase = 0x3f8,
- .irq = 1,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = 0x2f8,
- .irq = 2,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource am79c961_resources[] = {
- {
- .start = 0x220,
- .end = 0x238,
- .flags = IORESOURCE_IO,
- }, {
- .start = IRQ_EBSA110_ETHERNET,
- .end = IRQ_EBSA110_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device am79c961_device = {
- .name = "am79c961",
- .id = -1,
- .num_resources = ARRAY_SIZE(am79c961_resources),
- .resource = am79c961_resources,
-};
-
-static struct platform_device *ebsa110_devices[] = {
- &serial_device,
- &am79c961_device,
-};
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static void ebsa110_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-static int __init ebsa110_init(void)
-{
- arm_pm_idle = ebsa110_idle;
- return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
-}
-
-arch_initcall(ebsa110_init);
-
-static void ebsa110_restart(enum reboot_mode mode, const char *cmd)
-{
- soft_restart(0x80000000);
-}
-
-MACHINE_START(EBSA110, "EBSA110")
- /* Maintainer: Russell King */
- .atag_offset = 0x400,
- .reserve_lp0 = 1,
- .reserve_lp2 = 1,
- .map_io = ebsa110_map_io,
- .init_early = ebsa110_init_early,
- .init_irq = ebsa110_init_irq,
- .init_time = ebsa110_timer_init,
- .restart = ebsa110_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
deleted file mode 100644
index 47acc610b6b4..000000000000
--- a/arch/arm/mach-ebsa110/core.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the core hardware definitions of the EBSA-110.
- */
-#ifndef CORE_H
-#define CORE_H
-
-/* Physical addresses/sizes */
-#define ISAMEM_PHYS 0xe0000000
-#define ISAMEM_SIZE 0x10000000
-
-#define ISAIO_PHYS 0xf0000000
-#define ISAIO_SIZE PGDIR_SIZE
-
-#define TRICK0_PHYS 0xf2000000
-#define TRICK0_SIZE PGDIR_SIZE
-#define TRICK1_PHYS 0xf2400000
-#define TRICK1_SIZE PGDIR_SIZE
-#define TRICK2_PHYS 0xf2800000
-#define TRICK3_PHYS 0xf2c00000
-#define TRICK3_SIZE PGDIR_SIZE
-#define TRICK4_PHYS 0xf3000000
-#define TRICK4_SIZE PGDIR_SIZE
-#define TRICK5_PHYS 0xf3400000
-#define TRICK6_PHYS 0xf3800000
-#define TRICK7_PHYS 0xf3c00000
-
-/* Virtual addresses */
-#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */
-#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */
-#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */
-#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */
-#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */
-#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
deleted file mode 100644
index 14b110de78a9..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT 0xff000000 /* read */
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #IRQ_STAT
- .endm
-
- .macro get_irqnr_and_base, irqnr, stat, base, tmp
- ldrb \stat, [\base] @ get interrupts
- mov \irqnr, #0
- tst \stat, #15
- addeq \irqnr, \irqnr, #4
- moveq \stat, \stat, lsr #4
- tst \stat, #3
- addeq \irqnr, \irqnr, #2
- moveq \stat, \stat, lsr #2
- tst \stat, #1
- addeq \irqnr, \irqnr, #1
- moveq \stat, \stat, lsr #1
- tst \stat, #1 @ bit 0 should be set
- .endm
-
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
deleted file mode 100644
index 81f6967683f6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define ISAMEM_BASE 0xe0000000
-#define ISAIO_BASE 0xf0000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */
-
-#endif
-
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
deleted file mode 100644
index ad170886c9aa..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/io.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/io.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-u8 __inb8(unsigned int port);
-void __outb8(u8 val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8 val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8 __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8 val, volatile void __iomem *addr);
-void __writew(u16 val, volatile void __iomem *addr);
-void __writel(u32 val, volatile void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line. We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) __inb16(p)
-#define outb(v,p) __outb16(v,p)
-#else
-#define inb(p) __inb8(p)
-#define outb(v,p) __outb8(v,p)
-#endif
-
-#define inw(p) __inw(p)
-#define outw(v,p) __outw(v,p)
-
-#define inl(p) __inl(p)
-#define outl(v,p) __outl(v,p)
-
-#define readb(b) __readb(b)
-#define readw(b) __readw(b)
-#define readl(b) __readl(b)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(v,b) __writeb(v,b)
-#define writew(v,b) __writew(v,b)
-#define writel(v,b) __writel(v,b)
-
-#define insb insb
-extern void insb(unsigned int port, void *buf, int sz);
-#define insw insw
-extern void insw(unsigned int port, void *buf, int sz);
-#define insl insl
-extern void insl(unsigned int port, void *buf, int sz);
-
-#define outsb outsb
-extern void outsb(unsigned int port, const void *buf, int sz);
-#define outsw outsw
-extern void outsw(unsigned int port, const void *buf, int sz);
-#define outsl outsl
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-#define writesw writesw
-extern void writesw(volatile void __iomem *addr, const void *data, int wordlen);
-#define writesl writesl
-extern void writesl(volatile void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-#define readsw readsw
-extern void readsw(const volatile void __iomem *addr, void *data, int wordlen);
-
-#define readsl readsl
-extern void readsl(const volatile void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
deleted file mode 100644
index 29a8671fe849..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/irqs.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/irqs.h
- *
- * Copyright (C) 1996 Russell King
- */
-
-#define NR_IRQS 8
-
-#define IRQ_EBSA110_PRINTER 0
-#define IRQ_EBSA110_COM1 1
-#define IRQ_EBSA110_COM2 2
-#define IRQ_EBSA110_ETHERNET 3
-#define IRQ_EBSA110_TIMER0 4
-#define IRQ_EBSA110_TIMER1 5
-#define IRQ_EBSA110_PCMCIA 6
-#define IRQ_EBSA110_IMMEDIATE 7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
deleted file mode 100644
index f025f405de50..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/memory.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
deleted file mode 100644
index 3ec12efe98a6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/uncompress.h
- *
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE ((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while (!(v & UART_LSR_THRE));
-
- base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
- (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
deleted file mode 100644
index 3c44dd3596ea..000000000000
--- a/arch/arm/mach-ebsa110/io.c
+++ /dev/null
@@ -1,440 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-ebsa110/isamem.c
- *
- * Copyright (C) 2001 Russell King
- *
- * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities"
- * in the way it handles accesses to odd IO ports on 16-bit devices. These
- * devices have their D0-D15 lines connected to the processors D0-D15 lines.
- * Since they expect all byte IO operations to be performed on D0-D7, and the
- * StrongARM expects to transfer the byte to these odd addresses on D8-D15,
- * we must use a trick to get the required behaviour.
- *
- * The trick employed here is to use long word stores to odd address -1. The
- * glue logic picks this up as a "trick" access, and asserts the LSB of the
- * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the
- * StrongARM transfers its data on D0-D7 as expected.
- *
- * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller
- * wiring was screwed in such a way that it had limited memory space access.
- * Luckily, the work-around for this is not too horrible. See
- * __isamem_convert_addr for the details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
-{
- u32 ret, a = (u32 __force) addr;
-
- /*
- * The PCMCIA controller is wired up as follows:
- * +---------+---------+---------+---------+---------+---------+
- * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | |
- * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 |
- * +---------+---------+---------+---------+---------+---------+
- * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | |
- * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x |
- * +---------+---------+---------+---------+---------+---------+
- *
- * This means that we can access PCMCIA regions as follows:
- * 0x*10000 -> 0x*1ffff
- * 0x*70000 -> 0x*7ffff
- * 0x*90000 -> 0x*9ffff
- * 0x*f0000 -> 0x*fffff
- */
- ret = (a & 0xf803fe) << 1;
- ret |= (a & 0x03fc00) << 2;
-
- ret += 0xe8000000;
-
- if ((a & 0x20000) == (a & 0x40000) >> 1)
- return (void __iomem *)ret;
-
- BUG();
- return NULL;
-}
-
-/*
- * read[bwl] and write[bwl]
- */
-u8 __readb(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- return ret;
-}
-
-u16 __readw(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- return __raw_readw(a);
-}
-
-u32 __readl(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 3)
- BUG();
-
- ret = __raw_readw(a);
- ret |= __raw_readw(a + 4) << 16;
- return ret;
-}
-
-EXPORT_SYMBOL(__readb);
-EXPORT_SYMBOL(__readw);
-EXPORT_SYMBOL(__readl);
-
-void readsw(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_readsw(a, data, len);
-}
-EXPORT_SYMBOL(readsw);
-
-void readsl(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_readsl(a, data, len);
-}
-EXPORT_SYMBOL(readsl);
-
-void __writeb(u8 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
-}
-
-void __writew(u16 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- __raw_writew(val, a);
-}
-
-void __writel(u32 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 3)
- BUG();
-
- __raw_writew(val, a);
- __raw_writew(val >> 16, a + 4);
-}
-
-EXPORT_SYMBOL(__writeb);
-EXPORT_SYMBOL(__writew);
-EXPORT_SYMBOL(__writel);
-
-void writesw(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_writesw(a, data, len);
-}
-EXPORT_SYMBOL(writesw);
-
-void writesl(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_writesl(a, data, len);
-}
-EXPORT_SYMBOL(writesl);
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region IO region
- * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
- * f0000e60 - f0000e64 398 - 399
- * f0000de0 - f0000dfc 378 - 37f lp0
- * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region IO region
- * f00014f1 a79 pnp write data
- * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
- * f00004f1 279 pnp address
- * f0000440 - f000046c 220 - 236 eth0
- * f0000405 203 pnp read data
- */
-#define SUPERIO_PORT(p) \
- (((p) >> 3) == (0x3f8 >> 3) || \
- ((p) >> 3) == (0x2f8 >> 3) || \
- ((p) >> 3) == (0x378 >> 3))
-
-/*
- * We're addressing an 8 or 16-bit peripheral which tranfers
- * odd addresses on the low ISA byte lane.
- */
-u8 __inb8(unsigned int port)
-{
- u32 ret;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- }
- return ret;
-}
-
-/*
- * We're addressing a 16-bit peripheral which transfers odd
- * addresses on the high ISA byte lane.
- */
-u8 __inb16(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- return __raw_readb((void __iomem *)ISAIO_BASE + offset);
-}
-
-u16 __inw(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- return __raw_readw((void __iomem *)ISAIO_BASE + offset);
-}
-
-/*
- * Fake a 32-bit read with two 16-bit reads. Needed for 3c589.
- */
-u32 __inl(unsigned int port)
-{
- void __iomem *a;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- return __raw_readw(a) | __raw_readw(a + 4) << 16;
-}
-
-EXPORT_SYMBOL(__inb8);
-EXPORT_SYMBOL(__inb16);
-EXPORT_SYMBOL(__inw);
-EXPORT_SYMBOL(__inl);
-
-void __outb8(u8 val, unsigned int port)
-{
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
- }
-}
-
-void __outb16(u8 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outw(u16 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- __raw_writew(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outl(u32 val, unsigned int port)
-{
- BUG();
-}
-
-EXPORT_SYMBOL(__outb8);
-EXPORT_SYMBOL(__outb16);
-EXPORT_SYMBOL(__outw);
-EXPORT_SYMBOL(__outl);
-
-void outsb(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insb(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insb);
-
-void outsw(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insw(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(insw);
-
-/*
- * We implement these as 16-bit insw/outsw, mainly for
- * 3c589 cards.
- */
-void outsl(unsigned int port, const void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-void insl(unsigned int port, void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insl);
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
deleted file mode 100644
index fd1474b66d31..000000000000
--- a/arch/arm/mach-ebsa110/leds.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for the LED found on the EBSA110 machine
- * Based on Versatile and RealView machine LED code
- *
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#include "core.h"
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-static void ebsa110_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- if (b != LED_OFF)
- reg |= 0x80;
- else
- reg &= ~0x80;
-
- __raw_writeb(reg, SOFT_BASE);
-}
-
-static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- return (reg & 0x80) ? LED_FULL : LED_OFF;
-}
-
-static int __init ebsa110_leds_init(void)
-{
-
- struct led_classdev *cdev;
- int ret;
-
- if (!machine_is_ebsa110())
- return -ENODEV;
-
- cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
- if (!cdev)
- return -ENOMEM;
-
- cdev->name = "ebsa110:0";
- cdev->brightness_set = ebsa110_led_set;
- cdev->brightness_get = ebsa110_led_get;
- cdev->default_trigger = "heartbeat";
-
- ret = led_classdev_register(NULL, cdev);
- if (ret < 0) {
- kfree(cdev);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(ebsa110_leds_init);
-#endif
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fd7968635e6d..f22e37337030 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -599,7 +599,7 @@ config K3_RTI_WATCHDOG
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
+ depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST
depends on ARM
select WATCHDOG_CORE
help
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 01/15] ARM: remove ebsa110 platform
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Russell King
From: Arnd Bergmann <arnd@arndb.de>
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 8 -
arch/arm/Kconfig | 24 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 8 -
arch/arm/configs/ebsa110_defconfig | 74 ---
arch/arm/kernel/Makefile | 6 +-
arch/arm/mach-ebsa110/Makefile | 8 -
arch/arm/mach-ebsa110/Makefile.boot | 5 -
arch/arm/mach-ebsa110/core.c | 323 -------------
arch/arm/mach-ebsa110/core.h | 38 --
.../mach-ebsa110/include/mach/entry-macro.S | 33 --
arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -
arch/arm/mach-ebsa110/include/mach/io.h | 89 ----
arch/arm/mach-ebsa110/include/mach/irqs.h | 17 -
arch/arm/mach-ebsa110/include/mach/memory.h | 22 -
.../mach-ebsa110/include/mach/uncompress.h | 41 --
arch/arm/mach-ebsa110/io.c | 440 ------------------
arch/arm/mach-ebsa110/leds.c | 71 ---
drivers/watchdog/Kconfig | 2 +-
19 files changed, 7 insertions(+), 1229 deletions(-)
delete mode 100644 arch/arm/configs/ebsa110_defconfig
delete mode 100644 arch/arm/mach-ebsa110/Makefile
delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot
delete mode 100644 arch/arm/mach-ebsa110/core.c
delete mode 100644 arch/arm/mach-ebsa110/core.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-ebsa110/io.c
delete mode 100644 arch/arm/mach-ebsa110/leds.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e73636b75f29..12c6a9028ed2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1789,14 +1789,6 @@ F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
F: include/linux/moxtet.h
-ARM/EBSA110 MACHINE SUPPORT
-M: Russell King <linux@armlinux.org.uk>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-W: http://www.armlinux.org.uk/
-F: arch/arm/mach-ebsa110/
-F: drivers/net/ethernet/amd/am79c961a.*
-
ARM/ENERGY MICRO (SILICON LABS) EFM32 SUPPORT
M: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
R: Pengutronix Kernel Team <kernel@pengutronix.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe2f17eb2b50..1b9fda08b92f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -267,8 +267,7 @@ config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
- default 0x00000000 if ARCH_EBSA110 || \
- ARCH_FOOTBRIDGE
+ default 0x00000000 ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0xc0000000 if ARCH_SA1100
@@ -342,20 +341,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ
select USE_OF
-config ARCH_EBSA110
- bool "EBSA-110"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_SA110
- select ISA
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- select NO_IOPORT_MAP
- help
- This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an
- Ethernet interface, two PCMCIA sockets, two serial ports and a
- parallel port.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_SPARSEMEM_ENABLE
@@ -1371,7 +1356,6 @@ config ARCH_NR_GPIO
config HZ_FIXED
int
- default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0
@@ -1587,9 +1571,7 @@ config FORCE_MAX_ZONEORDER
a value of 11 means that the largest free memory block is 2^10 pages.
config ALIGNMENT_TRAP
- bool
- depends on CPU_CP15_MMU
- default y if !ARCH_EBSA110
+ def_bool CPU_CP15_MMU
select HAVE_PROC_CPU if PROC_FS
help
ARM processors cannot fetch/store information which is not
@@ -1784,7 +1766,7 @@ config CMDLINE
string "Default kernel command string"
default ""
help
- On some architectures (EBSA110 and CATS), there is currently no way
+ On some architectures (e.g. CATS), there is currently no way
for the boot loader to pass arguments to the kernel. For these
architectures, you should supply some command-line options at build
time by entering them here. As a minimum, you should specify the
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8986a91a6f31..4ff04201a8cc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1567,7 +1567,7 @@ config DEBUG_SIRFSOC_UART
config DEBUG_UART_FLOW_CONTROL
bool "Enable flow control (CTS) for the debug UART"
depends on DEBUG_LL
- default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+ default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
help
Some UART ports are connected to terminals that will use modem
control signals to indicate whether they are ready to receive text.
@@ -1639,7 +1639,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1743,7 +1743,6 @@ config DEBUG_UART_PHYS
default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
default 0xe8009000 if DEBUG_R7S9210_SCIF4
default 0xf0000000 if DEBUG_DIGICOLOR_UA0
- default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1790,7 +1789,6 @@ config DEBUG_UART_VIRT
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
default 0xe0010fe0 if ARCH_RPC
- default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4d76eab2b22d..64999d94ed1b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -172,7 +172,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
@@ -239,13 +238,6 @@ plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_VERSATILE) += versatile
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
-
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := $(textofs-y)
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
deleted file mode 100644
index 731a22a55f4e..000000000000
--- a/arch/arm/configs/ebsa110_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT\x14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_ARCH_EBSA110=y
-CONFIG_PCCARD=m
-CONFIG_I82365=m
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rw mem\x16M console=ttyS1,38400n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_FASTFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_FW_LOADER=m
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AM79C961A=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_PRINTER=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 89e5d864e923..09e67cb02b20 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,7 +17,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-common.o irq.o opcodes.o \
- process.o ptrace.o reboot.o \
+ process.o ptrace.o reboot.o io.o \
setup.o signal.o sigreturn_codes.o \
stacktrace.o sys_arm.o time.o traps.o
@@ -83,10 +83,6 @@ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_VDSO) += vdso.o
obj-$(CONFIG_EFI) += efi.o
-
-ifneq ($(CONFIG_ARCH_EBSA110),y)
- obj-y += io.o
-endif
obj-$(CONFIG_PARAVIRT) += paravirt.o
head-y := head$(MMUEXT).o
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
deleted file mode 100644
index 296541315d25..000000000000
--- a/arch/arm/mach-ebsa110/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o io.o leds.o
diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot
deleted file mode 100644
index e7e98937c71b..000000000000
--- a/arch/arm/mach-ebsa110/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000400
-initrd_phys-y := 0x00800000
-
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
deleted file mode 100644
index 5960e3dfd2bf..000000000000
--- a/arch/arm/mach-ebsa110/core.c
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-ebsa110/core.c
- *
- * Copyright (C) 1998-2001 Russell King
- *
- * Extra MM routines for the EBSA-110 architecture
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/serial_8250.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-static void ebsa110_mask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MCLR);
-}
-
-static void ebsa110_unmask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MSET);
-}
-
-static struct irq_chip ebsa110_irq_chip = {
- .irq_ack = ebsa110_mask_irq,
- .irq_mask = ebsa110_mask_irq,
- .irq_unmask = ebsa110_unmask_irq,
-};
-
-static void __init ebsa110_init_irq(void)
-{
- unsigned long flags;
- unsigned int irq;
-
- local_irq_save(flags);
- __raw_writeb(0xff, IRQ_MCLR);
- __raw_writeb(0x55, IRQ_MSET);
- __raw_writeb(0x00, IRQ_MSET);
- if (__raw_readb(IRQ_MASK) != 0x55)
- while (1);
- __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */
- local_irq_restore(flags);
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
- handle_level_irq);
- irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
-
-static struct map_desc ebsa110_io_desc[] __initdata = {
- /*
- * sparse external-decode ISAIO space
- */
- { /* IRQ_STAT/IRQ_MCLR */
- .virtual = (unsigned long)IRQ_STAT,
- .pfn = __phys_to_pfn(TRICK4_PHYS),
- .length = TRICK4_SIZE,
- .type = MT_DEVICE
- }, { /* IRQ_MASK/IRQ_MSET */
- .virtual = (unsigned long)IRQ_MASK,
- .pfn = __phys_to_pfn(TRICK3_PHYS),
- .length = TRICK3_SIZE,
- .type = MT_DEVICE
- }, { /* SOFT_BASE */
- .virtual = (unsigned long)SOFT_BASE,
- .pfn = __phys_to_pfn(TRICK1_PHYS),
- .length = TRICK1_SIZE,
- .type = MT_DEVICE
- }, { /* PIT_BASE */
- .virtual = (unsigned long)PIT_BASE,
- .pfn = __phys_to_pfn(TRICK0_PHYS),
- .length = TRICK0_SIZE,
- .type = MT_DEVICE
- },
-
- /*
- * self-decode ISAIO space
- */
- {
- .virtual = ISAIO_BASE,
- .pfn = __phys_to_pfn(ISAIO_PHYS),
- .length = ISAIO_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = ISAMEM_BASE,
- .pfn = __phys_to_pfn(ISAMEM_PHYS),
- .length = ISAMEM_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init ebsa110_map_io(void)
-{
- iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
-}
-
-static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
- unsigned int flags, void *caller)
-{
- return (void __iomem *)cookie;
-}
-
-static void ebsa110_iounmap(volatile void __iomem *io_addr)
-{}
-
-static void __init ebsa110_init_early(void)
-{
- arch_ioremap_caller = ebsa110_ioremap_caller;
- arch_iounmap = ebsa110_iounmap;
-}
-
-#define PIT_CTRL (PIT_BASE + 0x0d)
-#define PIT_T2 (PIT_BASE + 0x09)
-#define PIT_T1 (PIT_BASE + 0x05)
-#define PIT_T0 (PIT_BASE + 0x01)
-
-/*
- * This is the rate at which your MCLK signal toggles (in Hz)
- * This was measured on a 10 digit frequency counter sampling
- * over 1 second.
- */
-#define MCLK 47894000
-
-/*
- * This is the rate at which the PIT timers get clocked
- */
-#define CLKBY7 (MCLK / 7)
-
-/*
- * This is the counter value. We tick at 200Hz on this platform.
- */
-#define COUNT ((CLKBY7 + (HZ / 2)) / HZ)
-
-/*
- * Get the time offset from the system PIT. Note that if we have missed an
- * interrupt, then the PIT counter will roll over (ie, be negative).
- * This actually works out to be convenient.
- */
-static u32 ebsa110_gettimeoffset(void)
-{
- unsigned long offset, count;
-
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- /*
- * If count > COUNT, make the number negative.
- */
- if (count > COUNT)
- count |= 0xffff0000;
-
- offset = COUNT;
- offset -= count;
-
- /*
- * `offset' is in units of timer counts. Convert
- * offset to units of microseconds.
- */
- offset = offset * (1000000 / HZ) / COUNT;
-
- return offset * 1000;
-}
-
-static irqreturn_t
-ebsa110_timer_interrupt(int irq, void *dev_id)
-{
- u32 count;
-
- /* latch and read timer 1 */
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- count += COUNT;
-
- __raw_writeb(count & 0xff, PIT_T1);
- __raw_writeb(count >> 8, PIT_T1);
-
- timer_tick();
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init ebsa110_timer_init(void)
-{
- int irq = IRQ_EBSA110_TIMER0;
-
- arch_gettimeoffset = ebsa110_gettimeoffset;
-
- /*
- * Timer 1, mode 2, LSB/MSB
- */
- __raw_writeb(0x70, PIT_CTRL);
- __raw_writeb(COUNT & 0xff, PIT_T1);
- __raw_writeb(COUNT >> 8, PIT_T1);
-
- if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "EBSA110 Timer Tick", NULL))
- pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .iobase = 0x3f8,
- .irq = 1,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = 0x2f8,
- .irq = 2,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource am79c961_resources[] = {
- {
- .start = 0x220,
- .end = 0x238,
- .flags = IORESOURCE_IO,
- }, {
- .start = IRQ_EBSA110_ETHERNET,
- .end = IRQ_EBSA110_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device am79c961_device = {
- .name = "am79c961",
- .id = -1,
- .num_resources = ARRAY_SIZE(am79c961_resources),
- .resource = am79c961_resources,
-};
-
-static struct platform_device *ebsa110_devices[] = {
- &serial_device,
- &am79c961_device,
-};
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static void ebsa110_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-static int __init ebsa110_init(void)
-{
- arm_pm_idle = ebsa110_idle;
- return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
-}
-
-arch_initcall(ebsa110_init);
-
-static void ebsa110_restart(enum reboot_mode mode, const char *cmd)
-{
- soft_restart(0x80000000);
-}
-
-MACHINE_START(EBSA110, "EBSA110")
- /* Maintainer: Russell King */
- .atag_offset = 0x400,
- .reserve_lp0 = 1,
- .reserve_lp2 = 1,
- .map_io = ebsa110_map_io,
- .init_early = ebsa110_init_early,
- .init_irq = ebsa110_init_irq,
- .init_time = ebsa110_timer_init,
- .restart = ebsa110_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
deleted file mode 100644
index 47acc610b6b4..000000000000
--- a/arch/arm/mach-ebsa110/core.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the core hardware definitions of the EBSA-110.
- */
-#ifndef CORE_H
-#define CORE_H
-
-/* Physical addresses/sizes */
-#define ISAMEM_PHYS 0xe0000000
-#define ISAMEM_SIZE 0x10000000
-
-#define ISAIO_PHYS 0xf0000000
-#define ISAIO_SIZE PGDIR_SIZE
-
-#define TRICK0_PHYS 0xf2000000
-#define TRICK0_SIZE PGDIR_SIZE
-#define TRICK1_PHYS 0xf2400000
-#define TRICK1_SIZE PGDIR_SIZE
-#define TRICK2_PHYS 0xf2800000
-#define TRICK3_PHYS 0xf2c00000
-#define TRICK3_SIZE PGDIR_SIZE
-#define TRICK4_PHYS 0xf3000000
-#define TRICK4_SIZE PGDIR_SIZE
-#define TRICK5_PHYS 0xf3400000
-#define TRICK6_PHYS 0xf3800000
-#define TRICK7_PHYS 0xf3c00000
-
-/* Virtual addresses */
-#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */
-#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */
-#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */
-#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */
-#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */
-#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
deleted file mode 100644
index 14b110de78a9..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT 0xff000000 /* read */
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #IRQ_STAT
- .endm
-
- .macro get_irqnr_and_base, irqnr, stat, base, tmp
- ldrb \stat, [\base] @ get interrupts
- mov \irqnr, #0
- tst \stat, #15
- addeq \irqnr, \irqnr, #4
- moveq \stat, \stat, lsr #4
- tst \stat, #3
- addeq \irqnr, \irqnr, #2
- moveq \stat, \stat, lsr #2
- tst \stat, #1
- addeq \irqnr, \irqnr, #1
- moveq \stat, \stat, lsr #1
- tst \stat, #1 @ bit 0 should be set
- .endm
-
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
deleted file mode 100644
index 81f6967683f6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define ISAMEM_BASE 0xe0000000
-#define ISAIO_BASE 0xf0000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */
-
-#endif
-
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
deleted file mode 100644
index ad170886c9aa..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/io.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/io.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-u8 __inb8(unsigned int port);
-void __outb8(u8 val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8 val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8 __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8 val, volatile void __iomem *addr);
-void __writew(u16 val, volatile void __iomem *addr);
-void __writel(u32 val, volatile void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line. We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) __inb16(p)
-#define outb(v,p) __outb16(v,p)
-#else
-#define inb(p) __inb8(p)
-#define outb(v,p) __outb8(v,p)
-#endif
-
-#define inw(p) __inw(p)
-#define outw(v,p) __outw(v,p)
-
-#define inl(p) __inl(p)
-#define outl(v,p) __outl(v,p)
-
-#define readb(b) __readb(b)
-#define readw(b) __readw(b)
-#define readl(b) __readl(b)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(v,b) __writeb(v,b)
-#define writew(v,b) __writew(v,b)
-#define writel(v,b) __writel(v,b)
-
-#define insb insb
-extern void insb(unsigned int port, void *buf, int sz);
-#define insw insw
-extern void insw(unsigned int port, void *buf, int sz);
-#define insl insl
-extern void insl(unsigned int port, void *buf, int sz);
-
-#define outsb outsb
-extern void outsb(unsigned int port, const void *buf, int sz);
-#define outsw outsw
-extern void outsw(unsigned int port, const void *buf, int sz);
-#define outsl outsl
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-#define writesw writesw
-extern void writesw(volatile void __iomem *addr, const void *data, int wordlen);
-#define writesl writesl
-extern void writesl(volatile void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-#define readsw readsw
-extern void readsw(const volatile void __iomem *addr, void *data, int wordlen);
-
-#define readsl readsl
-extern void readsl(const volatile void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
deleted file mode 100644
index 29a8671fe849..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/irqs.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/irqs.h
- *
- * Copyright (C) 1996 Russell King
- */
-
-#define NR_IRQS 8
-
-#define IRQ_EBSA110_PRINTER 0
-#define IRQ_EBSA110_COM1 1
-#define IRQ_EBSA110_COM2 2
-#define IRQ_EBSA110_ETHERNET 3
-#define IRQ_EBSA110_TIMER0 4
-#define IRQ_EBSA110_TIMER1 5
-#define IRQ_EBSA110_PCMCIA 6
-#define IRQ_EBSA110_IMMEDIATE 7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
deleted file mode 100644
index f025f405de50..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/memory.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
deleted file mode 100644
index 3ec12efe98a6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/uncompress.h
- *
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE ((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while (!(v & UART_LSR_THRE));
-
- base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !- (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
deleted file mode 100644
index 3c44dd3596ea..000000000000
--- a/arch/arm/mach-ebsa110/io.c
+++ /dev/null
@@ -1,440 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-ebsa110/isamem.c
- *
- * Copyright (C) 2001 Russell King
- *
- * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities"
- * in the way it handles accesses to odd IO ports on 16-bit devices. These
- * devices have their D0-D15 lines connected to the processors D0-D15 lines.
- * Since they expect all byte IO operations to be performed on D0-D7, and the
- * StrongARM expects to transfer the byte to these odd addresses on D8-D15,
- * we must use a trick to get the required behaviour.
- *
- * The trick employed here is to use long word stores to odd address -1. The
- * glue logic picks this up as a "trick" access, and asserts the LSB of the
- * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the
- * StrongARM transfers its data on D0-D7 as expected.
- *
- * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller
- * wiring was screwed in such a way that it had limited memory space access.
- * Luckily, the work-around for this is not too horrible. See
- * __isamem_convert_addr for the details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
-{
- u32 ret, a = (u32 __force) addr;
-
- /*
- * The PCMCIA controller is wired up as follows:
- * +---------+---------+---------+---------+---------+---------+
- * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | |
- * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 |
- * +---------+---------+---------+---------+---------+---------+
- * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | |
- * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x |
- * +---------+---------+---------+---------+---------+---------+
- *
- * This means that we can access PCMCIA regions as follows:
- * 0x*10000 -> 0x*1ffff
- * 0x*70000 -> 0x*7ffff
- * 0x*90000 -> 0x*9ffff
- * 0x*f0000 -> 0x*fffff
- */
- ret = (a & 0xf803fe) << 1;
- ret |= (a & 0x03fc00) << 2;
-
- ret += 0xe8000000;
-
- if ((a & 0x20000) = (a & 0x40000) >> 1)
- return (void __iomem *)ret;
-
- BUG();
- return NULL;
-}
-
-/*
- * read[bwl] and write[bwl]
- */
-u8 __readb(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- return ret;
-}
-
-u16 __readw(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- return __raw_readw(a);
-}
-
-u32 __readl(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 3)
- BUG();
-
- ret = __raw_readw(a);
- ret |= __raw_readw(a + 4) << 16;
- return ret;
-}
-
-EXPORT_SYMBOL(__readb);
-EXPORT_SYMBOL(__readw);
-EXPORT_SYMBOL(__readl);
-
-void readsw(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_readsw(a, data, len);
-}
-EXPORT_SYMBOL(readsw);
-
-void readsl(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_readsl(a, data, len);
-}
-EXPORT_SYMBOL(readsl);
-
-void __writeb(u8 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
-}
-
-void __writew(u16 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- __raw_writew(val, a);
-}
-
-void __writel(u32 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 3)
- BUG();
-
- __raw_writew(val, a);
- __raw_writew(val >> 16, a + 4);
-}
-
-EXPORT_SYMBOL(__writeb);
-EXPORT_SYMBOL(__writew);
-EXPORT_SYMBOL(__writel);
-
-void writesw(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_writesw(a, data, len);
-}
-EXPORT_SYMBOL(writesw);
-
-void writesl(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_writesl(a, data, len);
-}
-EXPORT_SYMBOL(writesl);
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region IO region
- * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
- * f0000e60 - f0000e64 398 - 399
- * f0000de0 - f0000dfc 378 - 37f lp0
- * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region IO region
- * f00014f1 a79 pnp write data
- * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
- * f00004f1 279 pnp address
- * f0000440 - f000046c 220 - 236 eth0
- * f0000405 203 pnp read data
- */
-#define SUPERIO_PORT(p) \
- (((p) >> 3) = (0x3f8 >> 3) || \
- ((p) >> 3) = (0x2f8 >> 3) || \
- ((p) >> 3) = (0x378 >> 3))
-
-/*
- * We're addressing an 8 or 16-bit peripheral which tranfers
- * odd addresses on the low ISA byte lane.
- */
-u8 __inb8(unsigned int port)
-{
- u32 ret;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- }
- return ret;
-}
-
-/*
- * We're addressing a 16-bit peripheral which transfers odd
- * addresses on the high ISA byte lane.
- */
-u8 __inb16(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- return __raw_readb((void __iomem *)ISAIO_BASE + offset);
-}
-
-u16 __inw(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- return __raw_readw((void __iomem *)ISAIO_BASE + offset);
-}
-
-/*
- * Fake a 32-bit read with two 16-bit reads. Needed for 3c589.
- */
-u32 __inl(unsigned int port)
-{
- void __iomem *a;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- return __raw_readw(a) | __raw_readw(a + 4) << 16;
-}
-
-EXPORT_SYMBOL(__inb8);
-EXPORT_SYMBOL(__inb16);
-EXPORT_SYMBOL(__inw);
-EXPORT_SYMBOL(__inl);
-
-void __outb8(u8 val, unsigned int port)
-{
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
- }
-}
-
-void __outb16(u8 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outw(u16 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- __raw_writew(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outl(u32 val, unsigned int port)
-{
- BUG();
-}
-
-EXPORT_SYMBOL(__outb8);
-EXPORT_SYMBOL(__outb16);
-EXPORT_SYMBOL(__outw);
-EXPORT_SYMBOL(__outl);
-
-void outsb(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insb(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insb);
-
-void outsw(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insw(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(insw);
-
-/*
- * We implement these as 16-bit insw/outsw, mainly for
- * 3c589 cards.
- */
-void outsl(unsigned int port, const void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-void insl(unsigned int port, void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insl);
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
deleted file mode 100644
index fd1474b66d31..000000000000
--- a/arch/arm/mach-ebsa110/leds.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for the LED found on the EBSA110 machine
- * Based on Versatile and RealView machine LED code
- *
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#include "core.h"
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-static void ebsa110_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- if (b != LED_OFF)
- reg |= 0x80;
- else
- reg &= ~0x80;
-
- __raw_writeb(reg, SOFT_BASE);
-}
-
-static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- return (reg & 0x80) ? LED_FULL : LED_OFF;
-}
-
-static int __init ebsa110_leds_init(void)
-{
-
- struct led_classdev *cdev;
- int ret;
-
- if (!machine_is_ebsa110())
- return -ENODEV;
-
- cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
- if (!cdev)
- return -ENOMEM;
-
- cdev->name = "ebsa110:0";
- cdev->brightness_set = ebsa110_led_set;
- cdev->brightness_get = ebsa110_led_get;
- cdev->default_trigger = "heartbeat";
-
- ret = led_classdev_register(NULL, cdev);
- if (ret < 0) {
- kfree(cdev);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(ebsa110_leds_init);
-#endif
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fd7968635e6d..f22e37337030 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -599,7 +599,7 @@ config K3_RTI_WATCHDOG
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
+ depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST
depends on ARM
select WATCHDOG_CORE
help
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 01/15] ARM: remove ebsa110 platform
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Russell King, Greg Ungerer, Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 8 -
arch/arm/Kconfig | 24 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 8 -
arch/arm/configs/ebsa110_defconfig | 74 ---
arch/arm/kernel/Makefile | 6 +-
arch/arm/mach-ebsa110/Makefile | 8 -
arch/arm/mach-ebsa110/Makefile.boot | 5 -
arch/arm/mach-ebsa110/core.c | 323 -------------
arch/arm/mach-ebsa110/core.h | 38 --
.../mach-ebsa110/include/mach/entry-macro.S | 33 --
arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -
arch/arm/mach-ebsa110/include/mach/io.h | 89 ----
arch/arm/mach-ebsa110/include/mach/irqs.h | 17 -
arch/arm/mach-ebsa110/include/mach/memory.h | 22 -
.../mach-ebsa110/include/mach/uncompress.h | 41 --
arch/arm/mach-ebsa110/io.c | 440 ------------------
arch/arm/mach-ebsa110/leds.c | 71 ---
drivers/watchdog/Kconfig | 2 +-
19 files changed, 7 insertions(+), 1229 deletions(-)
delete mode 100644 arch/arm/configs/ebsa110_defconfig
delete mode 100644 arch/arm/mach-ebsa110/Makefile
delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot
delete mode 100644 arch/arm/mach-ebsa110/core.c
delete mode 100644 arch/arm/mach-ebsa110/core.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-ebsa110/io.c
delete mode 100644 arch/arm/mach-ebsa110/leds.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e73636b75f29..12c6a9028ed2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1789,14 +1789,6 @@ F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
F: include/linux/moxtet.h
-ARM/EBSA110 MACHINE SUPPORT
-M: Russell King <linux@armlinux.org.uk>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-W: http://www.armlinux.org.uk/
-F: arch/arm/mach-ebsa110/
-F: drivers/net/ethernet/amd/am79c961a.*
-
ARM/ENERGY MICRO (SILICON LABS) EFM32 SUPPORT
M: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
R: Pengutronix Kernel Team <kernel@pengutronix.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fe2f17eb2b50..1b9fda08b92f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -267,8 +267,7 @@ config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
- default 0x00000000 if ARCH_EBSA110 || \
- ARCH_FOOTBRIDGE
+ default 0x00000000 ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0xc0000000 if ARCH_SA1100
@@ -342,20 +341,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ
select USE_OF
-config ARCH_EBSA110
- bool "EBSA-110"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_SA110
- select ISA
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- select NO_IOPORT_MAP
- help
- This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an
- Ethernet interface, two PCMCIA sockets, two serial ports and a
- parallel port.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_SPARSEMEM_ENABLE
@@ -1371,7 +1356,6 @@ config ARCH_NR_GPIO
config HZ_FIXED
int
- default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0
@@ -1587,9 +1571,7 @@ config FORCE_MAX_ZONEORDER
a value of 11 means that the largest free memory block is 2^10 pages.
config ALIGNMENT_TRAP
- bool
- depends on CPU_CP15_MMU
- default y if !ARCH_EBSA110
+ def_bool CPU_CP15_MMU
select HAVE_PROC_CPU if PROC_FS
help
ARM processors cannot fetch/store information which is not
@@ -1784,7 +1766,7 @@ config CMDLINE
string "Default kernel command string"
default ""
help
- On some architectures (EBSA110 and CATS), there is currently no way
+ On some architectures (e.g. CATS), there is currently no way
for the boot loader to pass arguments to the kernel. For these
architectures, you should supply some command-line options at build
time by entering them here. As a minimum, you should specify the
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8986a91a6f31..4ff04201a8cc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1567,7 +1567,7 @@ config DEBUG_SIRFSOC_UART
config DEBUG_UART_FLOW_CONTROL
bool "Enable flow control (CTS) for the debug UART"
depends on DEBUG_LL
- default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+ default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
help
Some UART ports are connected to terminals that will use modem
control signals to indicate whether they are ready to receive text.
@@ -1639,7 +1639,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1743,7 +1743,6 @@ config DEBUG_UART_PHYS
default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
default 0xe8009000 if DEBUG_R7S9210_SCIF4
default 0xf0000000 if DEBUG_DIGICOLOR_UA0
- default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1790,7 +1789,6 @@ config DEBUG_UART_VIRT
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
default 0xe0010fe0 if ARCH_RPC
- default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4d76eab2b22d..64999d94ed1b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -172,7 +172,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
@@ -239,13 +238,6 @@ plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_VERSATILE) += versatile
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
-
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := $(textofs-y)
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
deleted file mode 100644
index 731a22a55f4e..000000000000
--- a/arch/arm/configs/ebsa110_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_ARCH_EBSA110=y
-CONFIG_PCCARD=m
-CONFIG_I82365=m
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_FASTFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_FW_LOADER=m
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AM79C961A=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_PRINTER=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 89e5d864e923..09e67cb02b20 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,7 +17,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-common.o irq.o opcodes.o \
- process.o ptrace.o reboot.o \
+ process.o ptrace.o reboot.o io.o \
setup.o signal.o sigreturn_codes.o \
stacktrace.o sys_arm.o time.o traps.o
@@ -83,10 +83,6 @@ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_VDSO) += vdso.o
obj-$(CONFIG_EFI) += efi.o
-
-ifneq ($(CONFIG_ARCH_EBSA110),y)
- obj-y += io.o
-endif
obj-$(CONFIG_PARAVIRT) += paravirt.o
head-y := head$(MMUEXT).o
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
deleted file mode 100644
index 296541315d25..000000000000
--- a/arch/arm/mach-ebsa110/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o io.o leds.o
diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot
deleted file mode 100644
index e7e98937c71b..000000000000
--- a/arch/arm/mach-ebsa110/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000400
-initrd_phys-y := 0x00800000
-
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
deleted file mode 100644
index 5960e3dfd2bf..000000000000
--- a/arch/arm/mach-ebsa110/core.c
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-ebsa110/core.c
- *
- * Copyright (C) 1998-2001 Russell King
- *
- * Extra MM routines for the EBSA-110 architecture
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/serial_8250.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-static void ebsa110_mask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MCLR);
-}
-
-static void ebsa110_unmask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MSET);
-}
-
-static struct irq_chip ebsa110_irq_chip = {
- .irq_ack = ebsa110_mask_irq,
- .irq_mask = ebsa110_mask_irq,
- .irq_unmask = ebsa110_unmask_irq,
-};
-
-static void __init ebsa110_init_irq(void)
-{
- unsigned long flags;
- unsigned int irq;
-
- local_irq_save(flags);
- __raw_writeb(0xff, IRQ_MCLR);
- __raw_writeb(0x55, IRQ_MSET);
- __raw_writeb(0x00, IRQ_MSET);
- if (__raw_readb(IRQ_MASK) != 0x55)
- while (1);
- __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */
- local_irq_restore(flags);
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
- handle_level_irq);
- irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
-
-static struct map_desc ebsa110_io_desc[] __initdata = {
- /*
- * sparse external-decode ISAIO space
- */
- { /* IRQ_STAT/IRQ_MCLR */
- .virtual = (unsigned long)IRQ_STAT,
- .pfn = __phys_to_pfn(TRICK4_PHYS),
- .length = TRICK4_SIZE,
- .type = MT_DEVICE
- }, { /* IRQ_MASK/IRQ_MSET */
- .virtual = (unsigned long)IRQ_MASK,
- .pfn = __phys_to_pfn(TRICK3_PHYS),
- .length = TRICK3_SIZE,
- .type = MT_DEVICE
- }, { /* SOFT_BASE */
- .virtual = (unsigned long)SOFT_BASE,
- .pfn = __phys_to_pfn(TRICK1_PHYS),
- .length = TRICK1_SIZE,
- .type = MT_DEVICE
- }, { /* PIT_BASE */
- .virtual = (unsigned long)PIT_BASE,
- .pfn = __phys_to_pfn(TRICK0_PHYS),
- .length = TRICK0_SIZE,
- .type = MT_DEVICE
- },
-
- /*
- * self-decode ISAIO space
- */
- {
- .virtual = ISAIO_BASE,
- .pfn = __phys_to_pfn(ISAIO_PHYS),
- .length = ISAIO_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = ISAMEM_BASE,
- .pfn = __phys_to_pfn(ISAMEM_PHYS),
- .length = ISAMEM_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init ebsa110_map_io(void)
-{
- iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
-}
-
-static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
- unsigned int flags, void *caller)
-{
- return (void __iomem *)cookie;
-}
-
-static void ebsa110_iounmap(volatile void __iomem *io_addr)
-{}
-
-static void __init ebsa110_init_early(void)
-{
- arch_ioremap_caller = ebsa110_ioremap_caller;
- arch_iounmap = ebsa110_iounmap;
-}
-
-#define PIT_CTRL (PIT_BASE + 0x0d)
-#define PIT_T2 (PIT_BASE + 0x09)
-#define PIT_T1 (PIT_BASE + 0x05)
-#define PIT_T0 (PIT_BASE + 0x01)
-
-/*
- * This is the rate at which your MCLK signal toggles (in Hz)
- * This was measured on a 10 digit frequency counter sampling
- * over 1 second.
- */
-#define MCLK 47894000
-
-/*
- * This is the rate at which the PIT timers get clocked
- */
-#define CLKBY7 (MCLK / 7)
-
-/*
- * This is the counter value. We tick at 200Hz on this platform.
- */
-#define COUNT ((CLKBY7 + (HZ / 2)) / HZ)
-
-/*
- * Get the time offset from the system PIT. Note that if we have missed an
- * interrupt, then the PIT counter will roll over (ie, be negative).
- * This actually works out to be convenient.
- */
-static u32 ebsa110_gettimeoffset(void)
-{
- unsigned long offset, count;
-
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- /*
- * If count > COUNT, make the number negative.
- */
- if (count > COUNT)
- count |= 0xffff0000;
-
- offset = COUNT;
- offset -= count;
-
- /*
- * `offset' is in units of timer counts. Convert
- * offset to units of microseconds.
- */
- offset = offset * (1000000 / HZ) / COUNT;
-
- return offset * 1000;
-}
-
-static irqreturn_t
-ebsa110_timer_interrupt(int irq, void *dev_id)
-{
- u32 count;
-
- /* latch and read timer 1 */
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- count += COUNT;
-
- __raw_writeb(count & 0xff, PIT_T1);
- __raw_writeb(count >> 8, PIT_T1);
-
- timer_tick();
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init ebsa110_timer_init(void)
-{
- int irq = IRQ_EBSA110_TIMER0;
-
- arch_gettimeoffset = ebsa110_gettimeoffset;
-
- /*
- * Timer 1, mode 2, LSB/MSB
- */
- __raw_writeb(0x70, PIT_CTRL);
- __raw_writeb(COUNT & 0xff, PIT_T1);
- __raw_writeb(COUNT >> 8, PIT_T1);
-
- if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "EBSA110 Timer Tick", NULL))
- pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .iobase = 0x3f8,
- .irq = 1,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = 0x2f8,
- .irq = 2,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource am79c961_resources[] = {
- {
- .start = 0x220,
- .end = 0x238,
- .flags = IORESOURCE_IO,
- }, {
- .start = IRQ_EBSA110_ETHERNET,
- .end = IRQ_EBSA110_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device am79c961_device = {
- .name = "am79c961",
- .id = -1,
- .num_resources = ARRAY_SIZE(am79c961_resources),
- .resource = am79c961_resources,
-};
-
-static struct platform_device *ebsa110_devices[] = {
- &serial_device,
- &am79c961_device,
-};
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static void ebsa110_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-static int __init ebsa110_init(void)
-{
- arm_pm_idle = ebsa110_idle;
- return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
-}
-
-arch_initcall(ebsa110_init);
-
-static void ebsa110_restart(enum reboot_mode mode, const char *cmd)
-{
- soft_restart(0x80000000);
-}
-
-MACHINE_START(EBSA110, "EBSA110")
- /* Maintainer: Russell King */
- .atag_offset = 0x400,
- .reserve_lp0 = 1,
- .reserve_lp2 = 1,
- .map_io = ebsa110_map_io,
- .init_early = ebsa110_init_early,
- .init_irq = ebsa110_init_irq,
- .init_time = ebsa110_timer_init,
- .restart = ebsa110_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
deleted file mode 100644
index 47acc610b6b4..000000000000
--- a/arch/arm/mach-ebsa110/core.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the core hardware definitions of the EBSA-110.
- */
-#ifndef CORE_H
-#define CORE_H
-
-/* Physical addresses/sizes */
-#define ISAMEM_PHYS 0xe0000000
-#define ISAMEM_SIZE 0x10000000
-
-#define ISAIO_PHYS 0xf0000000
-#define ISAIO_SIZE PGDIR_SIZE
-
-#define TRICK0_PHYS 0xf2000000
-#define TRICK0_SIZE PGDIR_SIZE
-#define TRICK1_PHYS 0xf2400000
-#define TRICK1_SIZE PGDIR_SIZE
-#define TRICK2_PHYS 0xf2800000
-#define TRICK3_PHYS 0xf2c00000
-#define TRICK3_SIZE PGDIR_SIZE
-#define TRICK4_PHYS 0xf3000000
-#define TRICK4_SIZE PGDIR_SIZE
-#define TRICK5_PHYS 0xf3400000
-#define TRICK6_PHYS 0xf3800000
-#define TRICK7_PHYS 0xf3c00000
-
-/* Virtual addresses */
-#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */
-#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */
-#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */
-#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */
-#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */
-#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
deleted file mode 100644
index 14b110de78a9..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT 0xff000000 /* read */
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #IRQ_STAT
- .endm
-
- .macro get_irqnr_and_base, irqnr, stat, base, tmp
- ldrb \stat, [\base] @ get interrupts
- mov \irqnr, #0
- tst \stat, #15
- addeq \irqnr, \irqnr, #4
- moveq \stat, \stat, lsr #4
- tst \stat, #3
- addeq \irqnr, \irqnr, #2
- moveq \stat, \stat, lsr #2
- tst \stat, #1
- addeq \irqnr, \irqnr, #1
- moveq \stat, \stat, lsr #1
- tst \stat, #1 @ bit 0 should be set
- .endm
-
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
deleted file mode 100644
index 81f6967683f6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define ISAMEM_BASE 0xe0000000
-#define ISAIO_BASE 0xf0000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */
-
-#endif
-
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
deleted file mode 100644
index ad170886c9aa..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/io.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/io.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-u8 __inb8(unsigned int port);
-void __outb8(u8 val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8 val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8 __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8 val, volatile void __iomem *addr);
-void __writew(u16 val, volatile void __iomem *addr);
-void __writel(u32 val, volatile void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line. We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) __inb16(p)
-#define outb(v,p) __outb16(v,p)
-#else
-#define inb(p) __inb8(p)
-#define outb(v,p) __outb8(v,p)
-#endif
-
-#define inw(p) __inw(p)
-#define outw(v,p) __outw(v,p)
-
-#define inl(p) __inl(p)
-#define outl(v,p) __outl(v,p)
-
-#define readb(b) __readb(b)
-#define readw(b) __readw(b)
-#define readl(b) __readl(b)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(v,b) __writeb(v,b)
-#define writew(v,b) __writew(v,b)
-#define writel(v,b) __writel(v,b)
-
-#define insb insb
-extern void insb(unsigned int port, void *buf, int sz);
-#define insw insw
-extern void insw(unsigned int port, void *buf, int sz);
-#define insl insl
-extern void insl(unsigned int port, void *buf, int sz);
-
-#define outsb outsb
-extern void outsb(unsigned int port, const void *buf, int sz);
-#define outsw outsw
-extern void outsw(unsigned int port, const void *buf, int sz);
-#define outsl outsl
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-#define writesw writesw
-extern void writesw(volatile void __iomem *addr, const void *data, int wordlen);
-#define writesl writesl
-extern void writesl(volatile void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-#define readsw readsw
-extern void readsw(const volatile void __iomem *addr, void *data, int wordlen);
-
-#define readsl readsl
-extern void readsl(const volatile void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
deleted file mode 100644
index 29a8671fe849..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/irqs.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/irqs.h
- *
- * Copyright (C) 1996 Russell King
- */
-
-#define NR_IRQS 8
-
-#define IRQ_EBSA110_PRINTER 0
-#define IRQ_EBSA110_COM1 1
-#define IRQ_EBSA110_COM2 2
-#define IRQ_EBSA110_ETHERNET 3
-#define IRQ_EBSA110_TIMER0 4
-#define IRQ_EBSA110_TIMER1 5
-#define IRQ_EBSA110_PCMCIA 6
-#define IRQ_EBSA110_IMMEDIATE 7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
deleted file mode 100644
index f025f405de50..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/memory.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
deleted file mode 100644
index 3ec12efe98a6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/uncompress.h
- *
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE ((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while (!(v & UART_LSR_THRE));
-
- base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
- (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
deleted file mode 100644
index 3c44dd3596ea..000000000000
--- a/arch/arm/mach-ebsa110/io.c
+++ /dev/null
@@ -1,440 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-ebsa110/isamem.c
- *
- * Copyright (C) 2001 Russell King
- *
- * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities"
- * in the way it handles accesses to odd IO ports on 16-bit devices. These
- * devices have their D0-D15 lines connected to the processors D0-D15 lines.
- * Since they expect all byte IO operations to be performed on D0-D7, and the
- * StrongARM expects to transfer the byte to these odd addresses on D8-D15,
- * we must use a trick to get the required behaviour.
- *
- * The trick employed here is to use long word stores to odd address -1. The
- * glue logic picks this up as a "trick" access, and asserts the LSB of the
- * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the
- * StrongARM transfers its data on D0-D7 as expected.
- *
- * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller
- * wiring was screwed in such a way that it had limited memory space access.
- * Luckily, the work-around for this is not too horrible. See
- * __isamem_convert_addr for the details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
-{
- u32 ret, a = (u32 __force) addr;
-
- /*
- * The PCMCIA controller is wired up as follows:
- * +---------+---------+---------+---------+---------+---------+
- * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | |
- * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 |
- * +---------+---------+---------+---------+---------+---------+
- * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | |
- * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x |
- * +---------+---------+---------+---------+---------+---------+
- *
- * This means that we can access PCMCIA regions as follows:
- * 0x*10000 -> 0x*1ffff
- * 0x*70000 -> 0x*7ffff
- * 0x*90000 -> 0x*9ffff
- * 0x*f0000 -> 0x*fffff
- */
- ret = (a & 0xf803fe) << 1;
- ret |= (a & 0x03fc00) << 2;
-
- ret += 0xe8000000;
-
- if ((a & 0x20000) == (a & 0x40000) >> 1)
- return (void __iomem *)ret;
-
- BUG();
- return NULL;
-}
-
-/*
- * read[bwl] and write[bwl]
- */
-u8 __readb(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- return ret;
-}
-
-u16 __readw(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- return __raw_readw(a);
-}
-
-u32 __readl(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 3)
- BUG();
-
- ret = __raw_readw(a);
- ret |= __raw_readw(a + 4) << 16;
- return ret;
-}
-
-EXPORT_SYMBOL(__readb);
-EXPORT_SYMBOL(__readw);
-EXPORT_SYMBOL(__readl);
-
-void readsw(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_readsw(a, data, len);
-}
-EXPORT_SYMBOL(readsw);
-
-void readsl(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_readsl(a, data, len);
-}
-EXPORT_SYMBOL(readsl);
-
-void __writeb(u8 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
-}
-
-void __writew(u16 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- __raw_writew(val, a);
-}
-
-void __writel(u32 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 3)
- BUG();
-
- __raw_writew(val, a);
- __raw_writew(val >> 16, a + 4);
-}
-
-EXPORT_SYMBOL(__writeb);
-EXPORT_SYMBOL(__writew);
-EXPORT_SYMBOL(__writel);
-
-void writesw(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_writesw(a, data, len);
-}
-EXPORT_SYMBOL(writesw);
-
-void writesl(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_writesl(a, data, len);
-}
-EXPORT_SYMBOL(writesl);
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region IO region
- * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
- * f0000e60 - f0000e64 398 - 399
- * f0000de0 - f0000dfc 378 - 37f lp0
- * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region IO region
- * f00014f1 a79 pnp write data
- * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
- * f00004f1 279 pnp address
- * f0000440 - f000046c 220 - 236 eth0
- * f0000405 203 pnp read data
- */
-#define SUPERIO_PORT(p) \
- (((p) >> 3) == (0x3f8 >> 3) || \
- ((p) >> 3) == (0x2f8 >> 3) || \
- ((p) >> 3) == (0x378 >> 3))
-
-/*
- * We're addressing an 8 or 16-bit peripheral which tranfers
- * odd addresses on the low ISA byte lane.
- */
-u8 __inb8(unsigned int port)
-{
- u32 ret;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- }
- return ret;
-}
-
-/*
- * We're addressing a 16-bit peripheral which transfers odd
- * addresses on the high ISA byte lane.
- */
-u8 __inb16(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- return __raw_readb((void __iomem *)ISAIO_BASE + offset);
-}
-
-u16 __inw(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- return __raw_readw((void __iomem *)ISAIO_BASE + offset);
-}
-
-/*
- * Fake a 32-bit read with two 16-bit reads. Needed for 3c589.
- */
-u32 __inl(unsigned int port)
-{
- void __iomem *a;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- return __raw_readw(a) | __raw_readw(a + 4) << 16;
-}
-
-EXPORT_SYMBOL(__inb8);
-EXPORT_SYMBOL(__inb16);
-EXPORT_SYMBOL(__inw);
-EXPORT_SYMBOL(__inl);
-
-void __outb8(u8 val, unsigned int port)
-{
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
- }
-}
-
-void __outb16(u8 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outw(u16 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- __raw_writew(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outl(u32 val, unsigned int port)
-{
- BUG();
-}
-
-EXPORT_SYMBOL(__outb8);
-EXPORT_SYMBOL(__outb16);
-EXPORT_SYMBOL(__outw);
-EXPORT_SYMBOL(__outl);
-
-void outsb(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insb(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insb);
-
-void outsw(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insw(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(insw);
-
-/*
- * We implement these as 16-bit insw/outsw, mainly for
- * 3c589 cards.
- */
-void outsl(unsigned int port, const void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-void insl(unsigned int port, void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insl);
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
deleted file mode 100644
index fd1474b66d31..000000000000
--- a/arch/arm/mach-ebsa110/leds.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for the LED found on the EBSA110 machine
- * Based on Versatile and RealView machine LED code
- *
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#include "core.h"
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-static void ebsa110_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- if (b != LED_OFF)
- reg |= 0x80;
- else
- reg &= ~0x80;
-
- __raw_writeb(reg, SOFT_BASE);
-}
-
-static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- return (reg & 0x80) ? LED_FULL : LED_OFF;
-}
-
-static int __init ebsa110_leds_init(void)
-{
-
- struct led_classdev *cdev;
- int ret;
-
- if (!machine_is_ebsa110())
- return -ENODEV;
-
- cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
- if (!cdev)
- return -ENOMEM;
-
- cdev->name = "ebsa110:0";
- cdev->brightness_set = ebsa110_led_set;
- cdev->brightness_get = ebsa110_led_get;
- cdev->default_trigger = "heartbeat";
-
- ret = led_classdev_register(NULL, cdev);
- if (ret < 0) {
- kfree(cdev);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(ebsa110_leds_init);
-#endif
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fd7968635e6d..f22e37337030 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -599,7 +599,7 @@ config K3_RTI_WATCHDOG
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
+ depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST
depends on ARM
select WATCHDOG_CORE
help
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH v2 01/15] ARM: remove ebsa110 platform
2020-10-30 15:17 ` Arnd Bergmann
(?)
(?)
@ 2020-11-01 17:28 ` kernel test robot
-1 siblings, 0 replies; 79+ messages in thread
From: kernel test robot @ 2020-11-01 17:28 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 11740 bytes --]
Hi Arnd,
I love your patch! Yet something to improve:
[auto build test ERROR on arm/for-next]
[also build test ERROR on m68knommu/for-next linus/master v5.10-rc1 next-20201030]
[cannot apply to m68k/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Arnd-Bergmann/timers-clean-up-ARCH_GETTIMEOFFSET-LEGACY_TIMER_TICK/20201031-222238
base: git://git.armlinux.org.uk/~rmk/linux-arm.git for-next
config: arm-h3600_defconfig
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/932488e866e4dfed64c8d2876d2f8881cfbcde6c
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Arnd-Bergmann/timers-clean-up-ARCH_GETTIMEOFFSET-LEGACY_TIMER_TICK/20201031-222238
git checkout 932488e866e4dfed64c8d2876d2f8881cfbcde6c
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm h3600_defconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> arch/arm/Kconfig:272: syntax error
arch/arm/Kconfig:271: invalid statement
arch/arm/Kconfig:272: invalid statement
arch/arm/Kconfig:273: invalid statement
arch/arm/Kconfig:274: invalid statement
arch/arm/Kconfig:275: invalid statement
arch/arm/Kconfig:276: unknown statement "Please"
arch/arm/Kconfig:277:warning: ignoring unsupported character '.'
arch/arm/Kconfig:277: unknown statement "location"
make[2]: *** [scripts/kconfig/Makefile:88: h3600_defconfig] Error 1
make[1]: *** [Makefile:604: h3600_defconfig] Error 2
make: *** [Makefile:185: __sub-make] Error 2
make: Target 'h3600_defconfig' not remade because of errors.
--
>> arch/arm/Kconfig:272: syntax error
arch/arm/Kconfig:271: invalid statement
arch/arm/Kconfig:272: invalid statement
arch/arm/Kconfig:273: invalid statement
arch/arm/Kconfig:274: invalid statement
arch/arm/Kconfig:275: invalid statement
arch/arm/Kconfig:276: unknown statement "Please"
arch/arm/Kconfig:277:warning: ignoring unsupported character '.'
arch/arm/Kconfig:277: unknown statement "location"
make[2]: *** [scripts/kconfig/Makefile:71: oldconfig] Error 1
make[1]: *** [Makefile:604: oldconfig] Error 2
make: *** [Makefile:185: __sub-make] Error 2
make: Target 'oldconfig' not remade because of errors.
--
>> arch/arm/Kconfig:272: syntax error
arch/arm/Kconfig:271: invalid statement
arch/arm/Kconfig:272: invalid statement
arch/arm/Kconfig:273: invalid statement
arch/arm/Kconfig:274: invalid statement
arch/arm/Kconfig:275: invalid statement
arch/arm/Kconfig:276: unknown statement "Please"
arch/arm/Kconfig:277:warning: ignoring unsupported character '.'
arch/arm/Kconfig:277: unknown statement "location"
make[2]: *** [scripts/kconfig/Makefile:71: olddefconfig] Error 1
make[1]: *** [Makefile:604: olddefconfig] Error 2
make: *** [Makefile:185: __sub-make] Error 2
make: Target 'olddefconfig' not remade because of errors.
vim +272 arch/arm/Kconfig
60460abffc7152 Seung-Woo Kim 2013-02-06 164
75e7153abd220f Ralf Baechle 2007-02-09 165 config SYS_SUPPORTS_APM_EMULATION
75e7153abd220f Ralf Baechle 2007-02-09 166 bool
75e7153abd220f Ralf Baechle 2007-02-09 167
bc581770cfdd8c Linus Walleij 2009-09-15 168 config HAVE_TCM
bc581770cfdd8c Linus Walleij 2009-09-15 169 bool
bc581770cfdd8c Linus Walleij 2009-09-15 170 select GENERIC_ALLOCATOR
bc581770cfdd8c Linus Walleij 2009-09-15 171
e119bfff1f102f Russell King 2010-01-10 172 config HAVE_PROC_CPU
e119bfff1f102f Russell King 2010-01-10 173 bool
e119bfff1f102f Russell King 2010-01-10 174
ce816fa88cca08 Uwe Kleine-König 2014-04-07 175 config NO_IOPORT_MAP
5ea81769940034 Al Viro 2007-02-11 176 bool
5ea81769940034 Al Viro 2007-02-11 177
^1da177e4c3f41 Linus Torvalds 2005-04-16 178 config SBUS
^1da177e4c3f41 Linus Torvalds 2005-04-16 179 bool
^1da177e4c3f41 Linus Torvalds 2005-04-16 180
f16fb1ecc5a1cb Russell King 2007-04-28 181 config STACKTRACE_SUPPORT
f16fb1ecc5a1cb Russell King 2007-04-28 182 bool
f16fb1ecc5a1cb Russell King 2007-04-28 183 default y
f16fb1ecc5a1cb Russell King 2007-04-28 184
f16fb1ecc5a1cb Russell King 2007-04-28 185 config LOCKDEP_SUPPORT
f16fb1ecc5a1cb Russell King 2007-04-28 186 bool
f16fb1ecc5a1cb Russell King 2007-04-28 187 default y
f16fb1ecc5a1cb Russell King 2007-04-28 188
7ad1bcb25c5623 Russell King 2006-08-27 189 config TRACE_IRQFLAGS_SUPPORT
7ad1bcb25c5623 Russell King 2006-08-27 190 bool
cb1293e2f59455 Arnd Bergmann 2015-05-26 191 default !CPU_V7M
7ad1bcb25c5623 Russell King 2006-08-27 192
f0d1b0b30d250a David Howells 2006-12-08 193 config ARCH_HAS_ILOG2_U32
f0d1b0b30d250a David Howells 2006-12-08 194 bool
f0d1b0b30d250a David Howells 2006-12-08 195
f0d1b0b30d250a David Howells 2006-12-08 196 config ARCH_HAS_ILOG2_U64
f0d1b0b30d250a David Howells 2006-12-08 197 bool
f0d1b0b30d250a David Howells 2006-12-08 198
4a1b573346ee0d Eduardo Valentin 2013-06-13 199 config ARCH_HAS_BANDGAP
4a1b573346ee0d Eduardo Valentin 2013-06-13 200 bool
4a1b573346ee0d Eduardo Valentin 2013-06-13 201
a5f4c561b3b19a Stefan Agner 2015-08-13 202 config FIX_EARLYCON_MEM
a5f4c561b3b19a Stefan Agner 2015-08-13 203 def_bool y if MMU
a5f4c561b3b19a Stefan Agner 2015-08-13 204
b89c3b165fbec6 Akinobu Mita 2006-03-26 205 config GENERIC_HWEIGHT
b89c3b165fbec6 Akinobu Mita 2006-03-26 206 bool
b89c3b165fbec6 Akinobu Mita 2006-03-26 207 default y
b89c3b165fbec6 Akinobu Mita 2006-03-26 208
^1da177e4c3f41 Linus Torvalds 2005-04-16 209 config GENERIC_CALIBRATE_DELAY
^1da177e4c3f41 Linus Torvalds 2005-04-16 210 bool
^1da177e4c3f41 Linus Torvalds 2005-04-16 211 default y
^1da177e4c3f41 Linus Torvalds 2005-04-16 212
a08b6b7968e7a6 Al Viro 2005-09-06 213 config ARCH_MAY_HAVE_PC_FDC
a08b6b7968e7a6 Al Viro 2005-09-06 214 bool
a08b6b7968e7a6 Al Viro 2005-09-06 215
5ac6da669e2476 Christoph Lameter 2007-02-10 216 config ZONE_DMA
5ac6da669e2476 Christoph Lameter 2007-02-10 217 bool
5ac6da669e2476 Christoph Lameter 2007-02-10 218
c7edc9e326d53c David A. Long 2014-03-07 219 config ARCH_SUPPORTS_UPROBES
c7edc9e326d53c David A. Long 2014-03-07 220 def_bool y
c7edc9e326d53c David A. Long 2014-03-07 221
58af4a244fa9f7 Rob Herring 2012-03-20 222 config ARCH_HAS_DMA_SET_COHERENT_MASK
58af4a244fa9f7 Rob Herring 2012-03-20 223 bool
58af4a244fa9f7 Rob Herring 2012-03-20 224
^1da177e4c3f41 Linus Torvalds 2005-04-16 225 config GENERIC_ISA_DMA
^1da177e4c3f41 Linus Torvalds 2005-04-16 226 bool
^1da177e4c3f41 Linus Torvalds 2005-04-16 227
^1da177e4c3f41 Linus Torvalds 2005-04-16 228 config FIQ
^1da177e4c3f41 Linus Torvalds 2005-04-16 229 bool
^1da177e4c3f41 Linus Torvalds 2005-04-16 230
13a5045d4ee5a2 Rob Herring 2012-02-07 231 config NEED_RET_TO_USER
13a5045d4ee5a2 Rob Herring 2012-02-07 232 bool
13a5045d4ee5a2 Rob Herring 2012-02-07 233
034d2f5af1b976 Al Viro 2005-12-19 234 config ARCH_MTD_XIP
034d2f5af1b976 Al Viro 2005-12-19 235 bool
034d2f5af1b976 Al Viro 2005-12-19 236
dc21af99fadcfa Russell King 2011-01-04 237 config ARM_PATCH_PHYS_VIRT
c1becedc887164 Russell King 2011-08-10 238 bool "Patch physical to virtual translations at runtime" if EMBEDDED
c1becedc887164 Russell King 2011-08-10 239 default y
b511d75d615089 Nicolas Pitre 2011-02-21 240 depends on !XIP_KERNEL && MMU
dc21af99fadcfa Russell King 2011-01-04 241 help
111e9a5ce66e64 Russell King 2011-05-12 242 Patch phys-to-virt and virt-to-phys translation functions at
111e9a5ce66e64 Russell King 2011-05-12 243 boot and module load time according to the position of the
111e9a5ce66e64 Russell King 2011-05-12 244 kernel in system memory.
dc21af99fadcfa Russell King 2011-01-04 245
111e9a5ce66e64 Russell King 2011-05-12 246 This can only be used with non-XIP MMU kernels where the base
daece59689e76e Nicolas Pitre 2011-08-12 247 of physical memory is at a 16MB boundary.
dc21af99fadcfa Russell King 2011-01-04 248
c1becedc887164 Russell King 2011-08-10 249 Only disable this option if you know that you do not require
c1becedc887164 Russell King 2011-08-10 250 this feature (eg, building a kernel for a single machine) and
c1becedc887164 Russell King 2011-08-10 251 you need to shrink the kernel to the minimal size.
dc21af99fadcfa Russell King 2011-01-04 252
c334bc150524f8 Rob Herring 2012-03-04 253 config NEED_MACH_IO_H
c334bc150524f8 Rob Herring 2012-03-04 254 bool
c334bc150524f8 Rob Herring 2012-03-04 255 help
c334bc150524f8 Rob Herring 2012-03-04 256 Select this when mach/io.h is required to provide special
c334bc150524f8 Rob Herring 2012-03-04 257 definitions for this platform. The need for mach/io.h should
c334bc150524f8 Rob Herring 2012-03-04 258 be avoided when possible.
c334bc150524f8 Rob Herring 2012-03-04 259
0cdc8b921d6881 Nicolas Pitre 2011-09-02 260 config NEED_MACH_MEMORY_H
1b9f95f8ade9ef Nicolas Pitre 2011-07-05 261 bool
1b9f95f8ade9ef Nicolas Pitre 2011-07-05 262 help
0cdc8b921d6881 Nicolas Pitre 2011-09-02 263 Select this when mach/memory.h is required to provide special
0cdc8b921d6881 Nicolas Pitre 2011-09-02 264 definitions for this platform. The need for mach/memory.h should
0cdc8b921d6881 Nicolas Pitre 2011-09-02 265 be avoided when possible.
1b9f95f8ade9ef Nicolas Pitre 2011-07-05 266
1b9f95f8ade9ef Nicolas Pitre 2011-07-05 267 config PHYS_OFFSET
974c07249b06d9 Nicolas Pitre 2011-12-02 268 hex "Physical address of main memory" if MMU
c6f54a9b396260 Uwe Kleine-König 2014-07-23 269 depends on !ARM_PATCH_PHYS_VIRT
974c07249b06d9 Nicolas Pitre 2011-12-02 270 default DRAM_BASE if !MMU
932488e866e4df Arnd Bergmann 2020-10-30 271 default 0x00000000 ARCH_FOOTBRIDGE
c6f54a9b396260 Uwe Kleine-König 2014-07-23 @272 default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
c6f54a9b396260 Uwe Kleine-König 2014-07-23 273 default 0x20000000 if ARCH_S5PV210
b8824c9a54bb38 H Hartley Sweeten 2015-06-15 274 default 0xc0000000 if ARCH_SA1100
111e9a5ce66e64 Russell King 2011-05-12 275 help
1b9f95f8ade9ef Nicolas Pitre 2011-07-05 276 Please provide the physical address corresponding to the
1b9f95f8ade9ef Nicolas Pitre 2011-07-05 277 location of main memory in your system.
cada3c0841e1de Russell King 2011-01-04 278
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH v2 02/15] net: remove am79c961a driver
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Russell King,
Jakub Kicinski
From: Arnd Bergmann <arnd@arndb.de>
This driver was only used on the EBSA110 platform, which is now
getting removed, so the driver is no longer needed either.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/ethernet/amd/Kconfig | 10 +-
drivers/net/ethernet/amd/Makefile | 1 -
drivers/net/ethernet/amd/am79c961a.c | 763 ---------------------------
drivers/net/ethernet/amd/am79c961a.h | 143 -----
4 files changed, 1 insertion(+), 916 deletions(-)
delete mode 100644 drivers/net/ethernet/amd/am79c961a.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.h
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index db7d956a9c9b..d0b0609bbe23 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_AMD
default y
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
- (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
+ ISA || EISA || PCMCIA || ARM64
help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -75,14 +75,6 @@ config ARIADNE
To compile this driver as a module, choose M here: the module
will be called ariadne.
-config ARM_AM79C961A
- bool "ARM EBSA110 AM79C961A support"
- depends on ARM && ARCH_EBSA110
- select CRC32
- help
- If you wish to compile a kernel for the EBSA-110, then you should
- always answer Y to this.
-
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile
index 45f86822a5f7..0d2f478b49a5 100644
--- a/drivers/net/ethernet/amd/Makefile
+++ b/drivers/net/ethernet/amd/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
-obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_DECLANCE) += declance.o
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
deleted file mode 100644
index 1c53408f5d47..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ /dev/null
@@ -1,763 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.c
- *
- * by Russell King <rmk@arm.linux.org.uk> 1995-2001.
- *
- * Derived from various things including skeleton.c
- *
- * This is a special driver for the am79c961A Lance chip used in the
- * Intel (formally Digital Equipment Corp) EBSA110 platform. Please
- * note that this can not be built as a module (it doesn't make sense).
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/bitops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define TX_BUFFERS 15
-#define RX_BUFFERS 25
-
-#include "am79c961a.h"
-
-static irqreturn_t
-am79c961_interrupt (int irq, void *dev_id);
-
-static unsigned int net_debug = NET_DEBUG;
-
-static const char version[] =
- "am79c961 ethernet driver (C) 1995-2001 Russell King v0.04\n";
-
-/* --------------------------------------------------------------------------- */
-
-#ifdef __arm__
-static void write_rreg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #-4] @ NET_RDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_rreg(u_long base_addr, u_int reg)
-{
- unsigned short v;
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "ldrh %0, [%2, #-4] @ NET_RDP"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-static inline void write_ireg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #8] @ NET_IDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_ireg(u_long base_addr, u_int reg)
-{
- u_short v;
- asm volatile(
- "strh %1, [%2] @ NAT_RAP\n\t"
- "ldrh %0, [%2, #8] @ NET_IDP\n\t"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
-#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
-
-static void
-am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3");
- asm volatile(
- "ldmia %0!, {%1, %2}"
- : "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
- length -= 8;
- asm volatile(
- "strh %1, [%0], #4\n\t"
- "mov %1, %1, lsr #16\n\t"
- "strh %1, [%0], #4\n\t"
- "strh %2, [%0], #4\n\t"
- "mov %2, %2, lsr #16\n\t"
- "strh %2, [%0], #4"
- : "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
- }
- while (length > 0) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
-}
-
-static void
-am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "ldrh %4, [%0], #4\n\t"
- "ldrh %3, [%0], #4\n\t"
- "orr %2, %2, %4, lsl #16\n\t"
- "ldrh %4, [%0], #4\n\t"
- "orr %3, %3, %4, lsl #16\n\t"
- "stmia %1!, {%2, %3}"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
- : "0" (offset), "1" (buf));
- length -= 8;
- }
- while (length > 0) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
- length -= 2;
- }
-}
-#else
-#error Not compatible
-#endif
-
-static int
-am79c961_ramtest(struct net_device *dev, unsigned int val)
-{
- unsigned char *buffer = kmalloc (65536, GFP_KERNEL);
- int i, error = 0, errorcount = 0;
-
- if (!buffer)
- return 0;
- memset (buffer, val, 65536);
- am_writebuffer(dev, 0, buffer, 65536);
- memset (buffer, val ^ 255, 65536);
- am_readbuffer(dev, 0, buffer, 65536);
- for (i = 0; i < 65536; i++) {
- if (buffer[i] != val && !error) {
- printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i);
- error = 1;
- errorcount ++;
- } else if (error && buffer[i] == val) {
- printk ("%05X\n", i);
- error = 0;
- }
- }
- if (error)
- printk ("10000\n");
- kfree (buffer);
- return errorcount;
-}
-
-static void am79c961_mc_hash(char *addr, u16 *hash)
-{
- int idx, bit;
- u32 crc;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- idx = crc >> 30;
- bit = (crc >> 26) & 15;
-
- hash[idx] |= 1 << bit;
-}
-
-static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash)
-{
- unsigned int mode = MODE_PORT_10BT;
-
- if (dev->flags & IFF_PROMISC) {
- mode |= MODE_PROMISC;
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else if (dev->flags & IFF_ALLMULTI) {
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else {
- struct netdev_hw_addr *ha;
-
- memset(hash, 0, 4 * sizeof(*hash));
-
- netdev_for_each_mc_addr(ha, dev)
- am79c961_mc_hash(ha->addr, hash);
- }
-
- return mode;
-}
-
-static void
-am79c961_init_for_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- unsigned char *p;
- u_int hdr_addr, first_free_addr;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i;
-
- /*
- * Stop the chip.
- */
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
- write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
- write_ireg (dev->base_addr, 7, 0x0090); /* XMIT LED */
- write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
-
- for (i = LADRL; i <= LADRH; i++)
- write_rreg (dev->base_addr, i, multi_hash[i - LADRL]);
-
- for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
- write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
-
- write_rreg (dev->base_addr, MODE, mode);
- write_rreg (dev->base_addr, POLLINT, 0);
- write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
- write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
-
- first_free_addr = RX_BUFFERS * 8 + TX_BUFFERS * 8 + 16;
- hdr_addr = 0;
-
- priv->rxhead = 0;
- priv->rxtail = 0;
- priv->rxhdr = hdr_addr;
-
- for (i = 0; i < RX_BUFFERS; i++) {
- priv->rxbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, RMD_OWN);
- am_writeword (dev, hdr_addr + 4, (-1600));
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
- priv->txhead = 0;
- priv->txtail = 0;
- priv->txhdr = hdr_addr;
- for (i = 0; i < TX_BUFFERS; i++) {
- priv->txbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, TMD_STP|TMD_ENP);
- am_writeword (dev, hdr_addr + 4, 0xf000);
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
-
- write_rreg (dev->base_addr, BASERXL, priv->rxhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, BASETXL, priv->txhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_IDONM|CSR3_BABLM|CSR3_DXSUFLO);
- write_rreg (dev->base_addr, CSR4, CSR4_APAD_XMIT|CSR4_MFCOM|CSR4_RCVCCOM|CSR4_TXSTRTM|CSR4_JABM);
- write_rreg (dev->base_addr, CSR0, CSR0_IENA|CSR0_STRT);
-}
-
-static void am79c961_timer(struct timer_list *t)
-{
- struct dev_priv *priv = from_timer(priv, t, timer);
- struct net_device *dev = priv->dev;
- unsigned int lnkstat, carrier;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- carrier = netif_carrier_ok(dev);
-
- if (lnkstat && !carrier) {
- netif_carrier_on(dev);
- printk("%s: link up\n", dev->name);
- } else if (!lnkstat && carrier) {
- netif_carrier_off(dev);
- printk("%s: link down\n", dev->name);
- }
-
- mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500));
-}
-
-/*
- * Open/initialize the board.
- */
-static int
-am79c961_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- int ret;
-
- ret = request_irq(dev->irq, am79c961_interrupt, 0, dev->name, dev);
- if (ret)
- return ret;
-
- am79c961_init_for_open(dev);
-
- netif_carrier_off(dev);
-
- priv->timer.expires = jiffies;
- add_timer(&priv->timer);
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-/*
- * The inverse routine to am79c961_open().
- */
-static int
-am79c961_close(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
-
- del_timer_sync(&priv->timer);
-
- netif_stop_queue(dev);
- netif_carrier_off(dev);
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- free_irq (dev->irq, dev);
-
- return 0;
-}
-
-/*
- * Set or clear promiscuous/multicast mode filter for this adapter.
- */
-static void am79c961_setmulticastlist (struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i, stopped;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
-
- stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
-
- if (!stopped) {
- /*
- * Put the chip into suspend mode
- */
- write_rreg(dev->base_addr, CTRL1, CTRL1_SPND);
-
- /*
- * Spin waiting for chip to report suspend mode
- */
- while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- nop();
- spin_lock_irqsave(&priv->chip_lock, flags);
- }
- }
-
- /*
- * Update the multicast hash table
- */
- for (i = 0; i < ARRAY_SIZE(multi_hash); i++)
- write_rreg(dev->base_addr, i + LADRL, multi_hash[i]);
-
- /*
- * Write the mode register
- */
- write_rreg(dev->base_addr, MODE, mode);
-
- if (!stopped) {
- /*
- * Put the chip back into running mode
- */
- write_rreg(dev->base_addr, CTRL1, 0);
- }
-
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-}
-
-static void am79c961_timeout(struct net_device *dev, unsigned int txqueue)
-{
- printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n",
- dev->name);
-
- /*
- * ought to do some setup of the tx side here
- */
-
- netif_wake_queue(dev);
-}
-
-/*
- * Transmit a packet
- */
-static netdev_tx_t
-am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned int hdraddr, bufaddr;
- unsigned int head;
- unsigned long flags;
-
- head = priv->txhead;
- hdraddr = priv->txhdr + (head << 3);
- bufaddr = priv->txbuffer[head];
- head += 1;
- if (head >= TX_BUFFERS)
- head = 0;
-
- am_writebuffer (dev, bufaddr, skb->data, skb->len);
- am_writeword (dev, hdraddr + 4, -skb->len);
- am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
- priv->txhead = head;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- /*
- * If the next packet is owned by the ethernet device,
- * then the tx ring is full and we can't add another
- * packet.
- */
- if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN)
- netif_stop_queue(dev);
-
- dev_consume_skb_any(skb);
-
- return NETDEV_TX_OK;
-}
-
-/*
- * If we have a good packet(s), get it/them out of the buffers.
- */
-static void
-am79c961_rx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- struct sk_buff *skb;
- u_int hdraddr;
- u_int pktaddr;
- u_int status;
- int len;
-
- hdraddr = priv->rxhdr + (priv->rxtail << 3);
- pktaddr = priv->rxbuffer[priv->rxtail];
-
- status = am_readword (dev, hdraddr + 2);
- if (status & RMD_OWN) /* do we own it? */
- break;
-
- priv->rxtail ++;
- if (priv->rxtail >= RX_BUFFERS)
- priv->rxtail = 0;
-
- if ((status & (RMD_ERR|RMD_STP|RMD_ENP)) != (RMD_STP|RMD_ENP)) {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_errors++;
- if (status & RMD_ERR) {
- if (status & RMD_FRAM)
- dev->stats.rx_frame_errors++;
- if (status & RMD_CRC)
- dev->stats.rx_crc_errors++;
- } else if (status & RMD_STP)
- dev->stats.rx_length_errors++;
- continue;
- }
-
- len = am_readword(dev, hdraddr + 6);
- skb = netdev_alloc_skb(dev, len + 2);
-
- if (skb) {
- skb_reserve(skb, 2);
-
- am_readbuffer(dev, pktaddr, skb_put(skb, len), len);
- am_writeword(dev, hdraddr + 2, RMD_OWN);
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_bytes += len;
- dev->stats.rx_packets++;
- } else {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_dropped++;
- break;
- }
- } while (1);
-}
-
-/*
- * Update stats for the transmitted packet
- */
-static void
-am79c961_tx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- short len;
- u_int hdraddr;
- u_int status;
-
- hdraddr = priv->txhdr + (priv->txtail << 3);
- status = am_readword (dev, hdraddr + 2);
- if (status & TMD_OWN)
- break;
-
- priv->txtail ++;
- if (priv->txtail >= TX_BUFFERS)
- priv->txtail = 0;
-
- if (status & TMD_ERR) {
- u_int status2;
-
- dev->stats.tx_errors++;
-
- status2 = am_readword (dev, hdraddr + 6);
-
- /*
- * Clear the error byte
- */
- am_writeword (dev, hdraddr + 6, 0);
-
- if (status2 & TST_RTRY)
- dev->stats.collisions += 16;
- if (status2 & TST_LCOL)
- dev->stats.tx_window_errors++;
- if (status2 & TST_LCAR)
- dev->stats.tx_carrier_errors++;
- if (status2 & TST_UFLO)
- dev->stats.tx_fifo_errors++;
- continue;
- }
- dev->stats.tx_packets++;
- len = am_readword (dev, hdraddr + 4);
- dev->stats.tx_bytes += -len;
- } while (priv->txtail != priv->txhead);
-
- netif_wake_queue(dev);
-}
-
-static irqreturn_t
-am79c961_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct dev_priv *priv = netdev_priv(dev);
- u_int status, n = 100;
- int handled = 0;
-
- do {
- status = read_rreg(dev->base_addr, CSR0);
- write_rreg(dev->base_addr, CSR0, status &
- (CSR0_IENA|CSR0_TINT|CSR0_RINT|
- CSR0_MERR|CSR0_MISS|CSR0_CERR|CSR0_BABL));
-
- if (status & CSR0_RINT) {
- handled = 1;
- am79c961_rx(dev, priv);
- }
- if (status & CSR0_TINT) {
- handled = 1;
- am79c961_tx(dev, priv);
- }
- if (status & CSR0_MISS) {
- handled = 1;
- dev->stats.rx_dropped++;
- }
- if (status & CSR0_CERR) {
- handled = 1;
- mod_timer(&priv->timer, jiffies);
- }
- } while (--n && status & (CSR0_RINT | CSR0_TINT));
-
- return IRQ_RETVAL(handled);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void am79c961_poll_controller(struct net_device *dev)
-{
- unsigned long flags;
- local_irq_save(flags);
- am79c961_interrupt(dev->irq, dev);
- local_irq_restore(flags);
-}
-#endif
-
-/*
- * Initialise the chip. Note that we always expect
- * to be entered with interrupts enabled.
- */
-static int
-am79c961_hw_init(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
-
- spin_lock_irq(&priv->chip_lock);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irq(&priv->chip_lock);
-
- am79c961_ramtest(dev, 0x66);
- am79c961_ramtest(dev, 0x99);
-
- return 0;
-}
-
-static void __init am79c961_banner(void)
-{
- static unsigned version_printed;
-
- if (net_debug && version_printed++ == 0)
- printk(KERN_INFO "%s", version);
-}
-static const struct net_device_ops am79c961_netdev_ops = {
- .ndo_open = am79c961_open,
- .ndo_stop = am79c961_close,
- .ndo_start_xmit = am79c961_sendpacket,
- .ndo_set_rx_mode = am79c961_setmulticastlist,
- .ndo_tx_timeout = am79c961_timeout,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = am79c961_poll_controller,
-#endif
-};
-
-static int am79c961_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct net_device *dev;
- struct dev_priv *priv;
- int i, ret;
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!res)
- return -ENODEV;
-
- dev = alloc_etherdev(sizeof(struct dev_priv));
- ret = -ENOMEM;
- if (!dev)
- goto out;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- priv = netdev_priv(dev);
-
- /*
- * Fixed address and IRQ lines here.
- * The PNP initialisation should have been
- * done by the ether bootp loader.
- */
- dev->base_addr = res->start;
- ret = platform_get_irq(pdev, 0);
-
- if (ret < 0) {
- ret = -ENODEV;
- goto nodev;
- }
- dev->irq = ret;
-
- ret = -ENODEV;
- if (!request_region(dev->base_addr, 0x18, dev->name))
- goto nodev;
-
- /*
- * Reset the device.
- */
- inb(dev->base_addr + NET_RESET);
- udelay(5);
-
- /*
- * Check the manufacturer part of the
- * ether address.
- */
- if (inb(dev->base_addr) != 0x08 ||
- inb(dev->base_addr + 2) != 0x00 ||
- inb(dev->base_addr + 4) != 0x2b)
- goto release;
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
-
- am79c961_banner();
-
- spin_lock_init(&priv->chip_lock);
- priv->dev = dev;
- timer_setup(&priv->timer, am79c961_timer, 0);
-
- if (am79c961_hw_init(dev))
- goto release;
-
- dev->netdev_ops = &am79c961_netdev_ops;
-
- ret = register_netdev(dev);
- if (ret == 0) {
- printk(KERN_INFO "%s: ether address %pM\n",
- dev->name, dev->dev_addr);
- return 0;
- }
-
-release:
- release_region(dev->base_addr, 0x18);
-nodev:
- free_netdev(dev);
-out:
- return ret;
-}
-
-static struct platform_driver am79c961_driver = {
- .probe = am79c961_probe,
- .driver = {
- .name = "am79c961",
- },
-};
-
-static int __init am79c961_init(void)
-{
- return platform_driver_register(&am79c961_driver);
-}
-
-__initcall(am79c961_init);
diff --git a/drivers/net/ethernet/amd/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h
deleted file mode 100644
index 73679e053ceb..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.h
- */
-
-#ifndef _LINUX_am79c961a_H
-#define _LINUX_am79c961a_H
-
-/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
-#define DEBUG_TX 2
-#define DEBUG_RX 4
-#define DEBUG_INT 8
-#define DEBUG_IC 16
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-
-#define NET_UID 0
-#define NET_RDP 0x10
-#define NET_RAP 0x12
-#define NET_RESET 0x14
-#define NET_IDP 0x16
-
-/*
- * RAP registers
- */
-#define CSR0 0
-#define CSR0_INIT 0x0001
-#define CSR0_STRT 0x0002
-#define CSR0_STOP 0x0004
-#define CSR0_TDMD 0x0008
-#define CSR0_TXON 0x0010
-#define CSR0_RXON 0x0020
-#define CSR0_IENA 0x0040
-#define CSR0_INTR 0x0080
-#define CSR0_IDON 0x0100
-#define CSR0_TINT 0x0200
-#define CSR0_RINT 0x0400
-#define CSR0_MERR 0x0800
-#define CSR0_MISS 0x1000
-#define CSR0_CERR 0x2000
-#define CSR0_BABL 0x4000
-#define CSR0_ERR 0x8000
-
-#define CSR3 3
-#define CSR3_EMBA 0x0008
-#define CSR3_DXMT2PD 0x0010
-#define CSR3_LAPPEN 0x0020
-#define CSR3_DXSUFLO 0x0040
-#define CSR3_IDONM 0x0100
-#define CSR3_TINTM 0x0200
-#define CSR3_RINTM 0x0400
-#define CSR3_MERRM 0x0800
-#define CSR3_MISSM 0x1000
-#define CSR3_BABLM 0x4000
-#define CSR3_MASKALL 0x5F00
-
-#define CSR4 4
-#define CSR4_JABM 0x0001
-#define CSR4_JAB 0x0002
-#define CSR4_TXSTRTM 0x0004
-#define CSR4_TXSTRT 0x0008
-#define CSR4_RCVCCOM 0x0010
-#define CSR4_RCVCCO 0x0020
-#define CSR4_MFCOM 0x0100
-#define CSR4_MFCO 0x0200
-#define CSR4_ASTRP_RCV 0x0400
-#define CSR4_APAD_XMIT 0x0800
-
-#define CTRL1 5
-#define CTRL1_SPND 0x0001
-
-#define LADRL 8
-#define LADRM1 9
-#define LADRM2 10
-#define LADRH 11
-#define PADRL 12
-#define PADRM 13
-#define PADRH 14
-
-#define MODE 15
-#define MODE_DISRX 0x0001
-#define MODE_DISTX 0x0002
-#define MODE_LOOP 0x0004
-#define MODE_DTCRC 0x0008
-#define MODE_COLL 0x0010
-#define MODE_DRETRY 0x0020
-#define MODE_INTLOOP 0x0040
-#define MODE_PORT_AUI 0x0000
-#define MODE_PORT_10BT 0x0080
-#define MODE_DRXPA 0x2000
-#define MODE_DRXBA 0x4000
-#define MODE_PROMISC 0x8000
-
-#define BASERXL 24
-#define BASERXH 25
-#define BASETXL 30
-#define BASETXH 31
-
-#define POLLINT 47
-
-#define SIZERXR 76
-#define SIZETXR 78
-
-#define CSR_MFC 112
-
-#define RMD_ENP 0x0100
-#define RMD_STP 0x0200
-#define RMD_CRC 0x0800
-#define RMD_FRAM 0x2000
-#define RMD_ERR 0x4000
-#define RMD_OWN 0x8000
-
-#define TMD_ENP 0x0100
-#define TMD_STP 0x0200
-#define TMD_MORE 0x1000
-#define TMD_ERR 0x4000
-#define TMD_OWN 0x8000
-
-#define TST_RTRY 0x0400
-#define TST_LCAR 0x0800
-#define TST_LCOL 0x1000
-#define TST_UFLO 0x4000
-#define TST_BUFF 0x8000
-
-#define ISALED0 0x0004
-#define ISALED0_LNKST 0x8000
-
-struct dev_priv {
- unsigned long rxbuffer[RX_BUFFERS];
- unsigned long txbuffer[TX_BUFFERS];
- unsigned char txhead;
- unsigned char txtail;
- unsigned char rxhead;
- unsigned char rxtail;
- unsigned long rxhdr;
- unsigned long txhdr;
- spinlock_t chip_lock;
- struct timer_list timer;
- struct net_device *dev;
-};
-
-#endif
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 02/15] net: remove am79c961a driver
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Russell King,
Jakub Kicinski
From: Arnd Bergmann <arnd@arndb.de>
This driver was only used on the EBSA110 platform, which is now
getting removed, so the driver is no longer needed either.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/ethernet/amd/Kconfig | 10 +-
drivers/net/ethernet/amd/Makefile | 1 -
drivers/net/ethernet/amd/am79c961a.c | 763 ---------------------------
drivers/net/ethernet/amd/am79c961a.h | 143 -----
4 files changed, 1 insertion(+), 916 deletions(-)
delete mode 100644 drivers/net/ethernet/amd/am79c961a.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.h
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index db7d956a9c9b..d0b0609bbe23 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_AMD
default y
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
- (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
+ ISA || EISA || PCMCIA || ARM64
help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -75,14 +75,6 @@ config ARIADNE
To compile this driver as a module, choose M here: the module
will be called ariadne.
-config ARM_AM79C961A
- bool "ARM EBSA110 AM79C961A support"
- depends on ARM && ARCH_EBSA110
- select CRC32
- help
- If you wish to compile a kernel for the EBSA-110, then you should
- always answer Y to this.
-
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile
index 45f86822a5f7..0d2f478b49a5 100644
--- a/drivers/net/ethernet/amd/Makefile
+++ b/drivers/net/ethernet/amd/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
-obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_DECLANCE) += declance.o
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
deleted file mode 100644
index 1c53408f5d47..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ /dev/null
@@ -1,763 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.c
- *
- * by Russell King <rmk@arm.linux.org.uk> 1995-2001.
- *
- * Derived from various things including skeleton.c
- *
- * This is a special driver for the am79c961A Lance chip used in the
- * Intel (formally Digital Equipment Corp) EBSA110 platform. Please
- * note that this can not be built as a module (it doesn't make sense).
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/bitops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define TX_BUFFERS 15
-#define RX_BUFFERS 25
-
-#include "am79c961a.h"
-
-static irqreturn_t
-am79c961_interrupt (int irq, void *dev_id);
-
-static unsigned int net_debug = NET_DEBUG;
-
-static const char version[] - "am79c961 ethernet driver (C) 1995-2001 Russell King v0.04\n";
-
-/* --------------------------------------------------------------------------- */
-
-#ifdef __arm__
-static void write_rreg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #-4] @ NET_RDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_rreg(u_long base_addr, u_int reg)
-{
- unsigned short v;
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "ldrh %0, [%2, #-4] @ NET_RDP"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-static inline void write_ireg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #8] @ NET_IDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_ireg(u_long base_addr, u_int reg)
-{
- u_short v;
- asm volatile(
- "strh %1, [%2] @ NAT_RAP\n\t"
- "ldrh %0, [%2, #8] @ NET_IDP\n\t"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
-#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
-
-static void
-am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3");
- asm volatile(
- "ldmia %0!, {%1, %2}"
- : "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
- length -= 8;
- asm volatile(
- "strh %1, [%0], #4\n\t"
- "mov %1, %1, lsr #16\n\t"
- "strh %1, [%0], #4\n\t"
- "strh %2, [%0], #4\n\t"
- "mov %2, %2, lsr #16\n\t"
- "strh %2, [%0], #4"
- : "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
- }
- while (length > 0) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
-}
-
-static void
-am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "ldrh %4, [%0], #4\n\t"
- "ldrh %3, [%0], #4\n\t"
- "orr %2, %2, %4, lsl #16\n\t"
- "ldrh %4, [%0], #4\n\t"
- "orr %3, %3, %4, lsl #16\n\t"
- "stmia %1!, {%2, %3}"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
- : "0" (offset), "1" (buf));
- length -= 8;
- }
- while (length > 0) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
- length -= 2;
- }
-}
-#else
-#error Not compatible
-#endif
-
-static int
-am79c961_ramtest(struct net_device *dev, unsigned int val)
-{
- unsigned char *buffer = kmalloc (65536, GFP_KERNEL);
- int i, error = 0, errorcount = 0;
-
- if (!buffer)
- return 0;
- memset (buffer, val, 65536);
- am_writebuffer(dev, 0, buffer, 65536);
- memset (buffer, val ^ 255, 65536);
- am_readbuffer(dev, 0, buffer, 65536);
- for (i = 0; i < 65536; i++) {
- if (buffer[i] != val && !error) {
- printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i);
- error = 1;
- errorcount ++;
- } else if (error && buffer[i] = val) {
- printk ("%05X\n", i);
- error = 0;
- }
- }
- if (error)
- printk ("10000\n");
- kfree (buffer);
- return errorcount;
-}
-
-static void am79c961_mc_hash(char *addr, u16 *hash)
-{
- int idx, bit;
- u32 crc;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- idx = crc >> 30;
- bit = (crc >> 26) & 15;
-
- hash[idx] |= 1 << bit;
-}
-
-static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash)
-{
- unsigned int mode = MODE_PORT_10BT;
-
- if (dev->flags & IFF_PROMISC) {
- mode |= MODE_PROMISC;
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else if (dev->flags & IFF_ALLMULTI) {
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else {
- struct netdev_hw_addr *ha;
-
- memset(hash, 0, 4 * sizeof(*hash));
-
- netdev_for_each_mc_addr(ha, dev)
- am79c961_mc_hash(ha->addr, hash);
- }
-
- return mode;
-}
-
-static void
-am79c961_init_for_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- unsigned char *p;
- u_int hdr_addr, first_free_addr;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i;
-
- /*
- * Stop the chip.
- */
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
- write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
- write_ireg (dev->base_addr, 7, 0x0090); /* XMIT LED */
- write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
-
- for (i = LADRL; i <= LADRH; i++)
- write_rreg (dev->base_addr, i, multi_hash[i - LADRL]);
-
- for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
- write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
-
- write_rreg (dev->base_addr, MODE, mode);
- write_rreg (dev->base_addr, POLLINT, 0);
- write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
- write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
-
- first_free_addr = RX_BUFFERS * 8 + TX_BUFFERS * 8 + 16;
- hdr_addr = 0;
-
- priv->rxhead = 0;
- priv->rxtail = 0;
- priv->rxhdr = hdr_addr;
-
- for (i = 0; i < RX_BUFFERS; i++) {
- priv->rxbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, RMD_OWN);
- am_writeword (dev, hdr_addr + 4, (-1600));
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
- priv->txhead = 0;
- priv->txtail = 0;
- priv->txhdr = hdr_addr;
- for (i = 0; i < TX_BUFFERS; i++) {
- priv->txbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, TMD_STP|TMD_ENP);
- am_writeword (dev, hdr_addr + 4, 0xf000);
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
-
- write_rreg (dev->base_addr, BASERXL, priv->rxhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, BASETXL, priv->txhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_IDONM|CSR3_BABLM|CSR3_DXSUFLO);
- write_rreg (dev->base_addr, CSR4, CSR4_APAD_XMIT|CSR4_MFCOM|CSR4_RCVCCOM|CSR4_TXSTRTM|CSR4_JABM);
- write_rreg (dev->base_addr, CSR0, CSR0_IENA|CSR0_STRT);
-}
-
-static void am79c961_timer(struct timer_list *t)
-{
- struct dev_priv *priv = from_timer(priv, t, timer);
- struct net_device *dev = priv->dev;
- unsigned int lnkstat, carrier;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- carrier = netif_carrier_ok(dev);
-
- if (lnkstat && !carrier) {
- netif_carrier_on(dev);
- printk("%s: link up\n", dev->name);
- } else if (!lnkstat && carrier) {
- netif_carrier_off(dev);
- printk("%s: link down\n", dev->name);
- }
-
- mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500));
-}
-
-/*
- * Open/initialize the board.
- */
-static int
-am79c961_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- int ret;
-
- ret = request_irq(dev->irq, am79c961_interrupt, 0, dev->name, dev);
- if (ret)
- return ret;
-
- am79c961_init_for_open(dev);
-
- netif_carrier_off(dev);
-
- priv->timer.expires = jiffies;
- add_timer(&priv->timer);
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-/*
- * The inverse routine to am79c961_open().
- */
-static int
-am79c961_close(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
-
- del_timer_sync(&priv->timer);
-
- netif_stop_queue(dev);
- netif_carrier_off(dev);
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- free_irq (dev->irq, dev);
-
- return 0;
-}
-
-/*
- * Set or clear promiscuous/multicast mode filter for this adapter.
- */
-static void am79c961_setmulticastlist (struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i, stopped;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
-
- stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
-
- if (!stopped) {
- /*
- * Put the chip into suspend mode
- */
- write_rreg(dev->base_addr, CTRL1, CTRL1_SPND);
-
- /*
- * Spin waiting for chip to report suspend mode
- */
- while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) = 0) {
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- nop();
- spin_lock_irqsave(&priv->chip_lock, flags);
- }
- }
-
- /*
- * Update the multicast hash table
- */
- for (i = 0; i < ARRAY_SIZE(multi_hash); i++)
- write_rreg(dev->base_addr, i + LADRL, multi_hash[i]);
-
- /*
- * Write the mode register
- */
- write_rreg(dev->base_addr, MODE, mode);
-
- if (!stopped) {
- /*
- * Put the chip back into running mode
- */
- write_rreg(dev->base_addr, CTRL1, 0);
- }
-
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-}
-
-static void am79c961_timeout(struct net_device *dev, unsigned int txqueue)
-{
- printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n",
- dev->name);
-
- /*
- * ought to do some setup of the tx side here
- */
-
- netif_wake_queue(dev);
-}
-
-/*
- * Transmit a packet
- */
-static netdev_tx_t
-am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned int hdraddr, bufaddr;
- unsigned int head;
- unsigned long flags;
-
- head = priv->txhead;
- hdraddr = priv->txhdr + (head << 3);
- bufaddr = priv->txbuffer[head];
- head += 1;
- if (head >= TX_BUFFERS)
- head = 0;
-
- am_writebuffer (dev, bufaddr, skb->data, skb->len);
- am_writeword (dev, hdraddr + 4, -skb->len);
- am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
- priv->txhead = head;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- /*
- * If the next packet is owned by the ethernet device,
- * then the tx ring is full and we can't add another
- * packet.
- */
- if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN)
- netif_stop_queue(dev);
-
- dev_consume_skb_any(skb);
-
- return NETDEV_TX_OK;
-}
-
-/*
- * If we have a good packet(s), get it/them out of the buffers.
- */
-static void
-am79c961_rx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- struct sk_buff *skb;
- u_int hdraddr;
- u_int pktaddr;
- u_int status;
- int len;
-
- hdraddr = priv->rxhdr + (priv->rxtail << 3);
- pktaddr = priv->rxbuffer[priv->rxtail];
-
- status = am_readword (dev, hdraddr + 2);
- if (status & RMD_OWN) /* do we own it? */
- break;
-
- priv->rxtail ++;
- if (priv->rxtail >= RX_BUFFERS)
- priv->rxtail = 0;
-
- if ((status & (RMD_ERR|RMD_STP|RMD_ENP)) != (RMD_STP|RMD_ENP)) {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_errors++;
- if (status & RMD_ERR) {
- if (status & RMD_FRAM)
- dev->stats.rx_frame_errors++;
- if (status & RMD_CRC)
- dev->stats.rx_crc_errors++;
- } else if (status & RMD_STP)
- dev->stats.rx_length_errors++;
- continue;
- }
-
- len = am_readword(dev, hdraddr + 6);
- skb = netdev_alloc_skb(dev, len + 2);
-
- if (skb) {
- skb_reserve(skb, 2);
-
- am_readbuffer(dev, pktaddr, skb_put(skb, len), len);
- am_writeword(dev, hdraddr + 2, RMD_OWN);
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_bytes += len;
- dev->stats.rx_packets++;
- } else {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_dropped++;
- break;
- }
- } while (1);
-}
-
-/*
- * Update stats for the transmitted packet
- */
-static void
-am79c961_tx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- short len;
- u_int hdraddr;
- u_int status;
-
- hdraddr = priv->txhdr + (priv->txtail << 3);
- status = am_readword (dev, hdraddr + 2);
- if (status & TMD_OWN)
- break;
-
- priv->txtail ++;
- if (priv->txtail >= TX_BUFFERS)
- priv->txtail = 0;
-
- if (status & TMD_ERR) {
- u_int status2;
-
- dev->stats.tx_errors++;
-
- status2 = am_readword (dev, hdraddr + 6);
-
- /*
- * Clear the error byte
- */
- am_writeword (dev, hdraddr + 6, 0);
-
- if (status2 & TST_RTRY)
- dev->stats.collisions += 16;
- if (status2 & TST_LCOL)
- dev->stats.tx_window_errors++;
- if (status2 & TST_LCAR)
- dev->stats.tx_carrier_errors++;
- if (status2 & TST_UFLO)
- dev->stats.tx_fifo_errors++;
- continue;
- }
- dev->stats.tx_packets++;
- len = am_readword (dev, hdraddr + 4);
- dev->stats.tx_bytes += -len;
- } while (priv->txtail != priv->txhead);
-
- netif_wake_queue(dev);
-}
-
-static irqreturn_t
-am79c961_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct dev_priv *priv = netdev_priv(dev);
- u_int status, n = 100;
- int handled = 0;
-
- do {
- status = read_rreg(dev->base_addr, CSR0);
- write_rreg(dev->base_addr, CSR0, status &
- (CSR0_IENA|CSR0_TINT|CSR0_RINT|
- CSR0_MERR|CSR0_MISS|CSR0_CERR|CSR0_BABL));
-
- if (status & CSR0_RINT) {
- handled = 1;
- am79c961_rx(dev, priv);
- }
- if (status & CSR0_TINT) {
- handled = 1;
- am79c961_tx(dev, priv);
- }
- if (status & CSR0_MISS) {
- handled = 1;
- dev->stats.rx_dropped++;
- }
- if (status & CSR0_CERR) {
- handled = 1;
- mod_timer(&priv->timer, jiffies);
- }
- } while (--n && status & (CSR0_RINT | CSR0_TINT));
-
- return IRQ_RETVAL(handled);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void am79c961_poll_controller(struct net_device *dev)
-{
- unsigned long flags;
- local_irq_save(flags);
- am79c961_interrupt(dev->irq, dev);
- local_irq_restore(flags);
-}
-#endif
-
-/*
- * Initialise the chip. Note that we always expect
- * to be entered with interrupts enabled.
- */
-static int
-am79c961_hw_init(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
-
- spin_lock_irq(&priv->chip_lock);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irq(&priv->chip_lock);
-
- am79c961_ramtest(dev, 0x66);
- am79c961_ramtest(dev, 0x99);
-
- return 0;
-}
-
-static void __init am79c961_banner(void)
-{
- static unsigned version_printed;
-
- if (net_debug && version_printed++ = 0)
- printk(KERN_INFO "%s", version);
-}
-static const struct net_device_ops am79c961_netdev_ops = {
- .ndo_open = am79c961_open,
- .ndo_stop = am79c961_close,
- .ndo_start_xmit = am79c961_sendpacket,
- .ndo_set_rx_mode = am79c961_setmulticastlist,
- .ndo_tx_timeout = am79c961_timeout,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = am79c961_poll_controller,
-#endif
-};
-
-static int am79c961_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct net_device *dev;
- struct dev_priv *priv;
- int i, ret;
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!res)
- return -ENODEV;
-
- dev = alloc_etherdev(sizeof(struct dev_priv));
- ret = -ENOMEM;
- if (!dev)
- goto out;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- priv = netdev_priv(dev);
-
- /*
- * Fixed address and IRQ lines here.
- * The PNP initialisation should have been
- * done by the ether bootp loader.
- */
- dev->base_addr = res->start;
- ret = platform_get_irq(pdev, 0);
-
- if (ret < 0) {
- ret = -ENODEV;
- goto nodev;
- }
- dev->irq = ret;
-
- ret = -ENODEV;
- if (!request_region(dev->base_addr, 0x18, dev->name))
- goto nodev;
-
- /*
- * Reset the device.
- */
- inb(dev->base_addr + NET_RESET);
- udelay(5);
-
- /*
- * Check the manufacturer part of the
- * ether address.
- */
- if (inb(dev->base_addr) != 0x08 ||
- inb(dev->base_addr + 2) != 0x00 ||
- inb(dev->base_addr + 4) != 0x2b)
- goto release;
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
-
- am79c961_banner();
-
- spin_lock_init(&priv->chip_lock);
- priv->dev = dev;
- timer_setup(&priv->timer, am79c961_timer, 0);
-
- if (am79c961_hw_init(dev))
- goto release;
-
- dev->netdev_ops = &am79c961_netdev_ops;
-
- ret = register_netdev(dev);
- if (ret = 0) {
- printk(KERN_INFO "%s: ether address %pM\n",
- dev->name, dev->dev_addr);
- return 0;
- }
-
-release:
- release_region(dev->base_addr, 0x18);
-nodev:
- free_netdev(dev);
-out:
- return ret;
-}
-
-static struct platform_driver am79c961_driver = {
- .probe = am79c961_probe,
- .driver = {
- .name = "am79c961",
- },
-};
-
-static int __init am79c961_init(void)
-{
- return platform_driver_register(&am79c961_driver);
-}
-
-__initcall(am79c961_init);
diff --git a/drivers/net/ethernet/amd/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h
deleted file mode 100644
index 73679e053ceb..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.h
- */
-
-#ifndef _LINUX_am79c961a_H
-#define _LINUX_am79c961a_H
-
-/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
-#define DEBUG_TX 2
-#define DEBUG_RX 4
-#define DEBUG_INT 8
-#define DEBUG_IC 16
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-
-#define NET_UID 0
-#define NET_RDP 0x10
-#define NET_RAP 0x12
-#define NET_RESET 0x14
-#define NET_IDP 0x16
-
-/*
- * RAP registers
- */
-#define CSR0 0
-#define CSR0_INIT 0x0001
-#define CSR0_STRT 0x0002
-#define CSR0_STOP 0x0004
-#define CSR0_TDMD 0x0008
-#define CSR0_TXON 0x0010
-#define CSR0_RXON 0x0020
-#define CSR0_IENA 0x0040
-#define CSR0_INTR 0x0080
-#define CSR0_IDON 0x0100
-#define CSR0_TINT 0x0200
-#define CSR0_RINT 0x0400
-#define CSR0_MERR 0x0800
-#define CSR0_MISS 0x1000
-#define CSR0_CERR 0x2000
-#define CSR0_BABL 0x4000
-#define CSR0_ERR 0x8000
-
-#define CSR3 3
-#define CSR3_EMBA 0x0008
-#define CSR3_DXMT2PD 0x0010
-#define CSR3_LAPPEN 0x0020
-#define CSR3_DXSUFLO 0x0040
-#define CSR3_IDONM 0x0100
-#define CSR3_TINTM 0x0200
-#define CSR3_RINTM 0x0400
-#define CSR3_MERRM 0x0800
-#define CSR3_MISSM 0x1000
-#define CSR3_BABLM 0x4000
-#define CSR3_MASKALL 0x5F00
-
-#define CSR4 4
-#define CSR4_JABM 0x0001
-#define CSR4_JAB 0x0002
-#define CSR4_TXSTRTM 0x0004
-#define CSR4_TXSTRT 0x0008
-#define CSR4_RCVCCOM 0x0010
-#define CSR4_RCVCCO 0x0020
-#define CSR4_MFCOM 0x0100
-#define CSR4_MFCO 0x0200
-#define CSR4_ASTRP_RCV 0x0400
-#define CSR4_APAD_XMIT 0x0800
-
-#define CTRL1 5
-#define CTRL1_SPND 0x0001
-
-#define LADRL 8
-#define LADRM1 9
-#define LADRM2 10
-#define LADRH 11
-#define PADRL 12
-#define PADRM 13
-#define PADRH 14
-
-#define MODE 15
-#define MODE_DISRX 0x0001
-#define MODE_DISTX 0x0002
-#define MODE_LOOP 0x0004
-#define MODE_DTCRC 0x0008
-#define MODE_COLL 0x0010
-#define MODE_DRETRY 0x0020
-#define MODE_INTLOOP 0x0040
-#define MODE_PORT_AUI 0x0000
-#define MODE_PORT_10BT 0x0080
-#define MODE_DRXPA 0x2000
-#define MODE_DRXBA 0x4000
-#define MODE_PROMISC 0x8000
-
-#define BASERXL 24
-#define BASERXH 25
-#define BASETXL 30
-#define BASETXH 31
-
-#define POLLINT 47
-
-#define SIZERXR 76
-#define SIZETXR 78
-
-#define CSR_MFC 112
-
-#define RMD_ENP 0x0100
-#define RMD_STP 0x0200
-#define RMD_CRC 0x0800
-#define RMD_FRAM 0x2000
-#define RMD_ERR 0x4000
-#define RMD_OWN 0x8000
-
-#define TMD_ENP 0x0100
-#define TMD_STP 0x0200
-#define TMD_MORE 0x1000
-#define TMD_ERR 0x4000
-#define TMD_OWN 0x8000
-
-#define TST_RTRY 0x0400
-#define TST_LCAR 0x0800
-#define TST_LCOL 0x1000
-#define TST_UFLO 0x4000
-#define TST_BUFF 0x8000
-
-#define ISALED0 0x0004
-#define ISALED0_LNKST 0x8000
-
-struct dev_priv {
- unsigned long rxbuffer[RX_BUFFERS];
- unsigned long txbuffer[TX_BUFFERS];
- unsigned char txhead;
- unsigned char txtail;
- unsigned char rxhead;
- unsigned char rxtail;
- unsigned long rxhdr;
- unsigned long txhdr;
- spinlock_t chip_lock;
- struct timer_list timer;
- struct net_device *dev;
-};
-
-#endif
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 02/15] net: remove am79c961a driver
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ia64, Linus Walleij, James E.J. Bottomley, Greg Ungerer,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
Jakub Kicinski, Sam Creasey, Fenghua Yu, Arnd Bergmann,
linux-m68k, John Stultz, Thomas Gleixner, Linux ARM, Tony Luck,
Parisc List, Stephen Boyd, Russell King, Philip Blundell,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
This driver was only used on the EBSA110 platform, which is now
getting removed, so the driver is no longer needed either.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/ethernet/amd/Kconfig | 10 +-
drivers/net/ethernet/amd/Makefile | 1 -
drivers/net/ethernet/amd/am79c961a.c | 763 ---------------------------
drivers/net/ethernet/amd/am79c961a.h | 143 -----
4 files changed, 1 insertion(+), 916 deletions(-)
delete mode 100644 drivers/net/ethernet/amd/am79c961a.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.h
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index db7d956a9c9b..d0b0609bbe23 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_AMD
default y
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
- (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
+ ISA || EISA || PCMCIA || ARM64
help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -75,14 +75,6 @@ config ARIADNE
To compile this driver as a module, choose M here: the module
will be called ariadne.
-config ARM_AM79C961A
- bool "ARM EBSA110 AM79C961A support"
- depends on ARM && ARCH_EBSA110
- select CRC32
- help
- If you wish to compile a kernel for the EBSA-110, then you should
- always answer Y to this.
-
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile
index 45f86822a5f7..0d2f478b49a5 100644
--- a/drivers/net/ethernet/amd/Makefile
+++ b/drivers/net/ethernet/amd/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
-obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_DECLANCE) += declance.o
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
deleted file mode 100644
index 1c53408f5d47..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ /dev/null
@@ -1,763 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.c
- *
- * by Russell King <rmk@arm.linux.org.uk> 1995-2001.
- *
- * Derived from various things including skeleton.c
- *
- * This is a special driver for the am79c961A Lance chip used in the
- * Intel (formally Digital Equipment Corp) EBSA110 platform. Please
- * note that this can not be built as a module (it doesn't make sense).
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/bitops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define TX_BUFFERS 15
-#define RX_BUFFERS 25
-
-#include "am79c961a.h"
-
-static irqreturn_t
-am79c961_interrupt (int irq, void *dev_id);
-
-static unsigned int net_debug = NET_DEBUG;
-
-static const char version[] =
- "am79c961 ethernet driver (C) 1995-2001 Russell King v0.04\n";
-
-/* --------------------------------------------------------------------------- */
-
-#ifdef __arm__
-static void write_rreg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #-4] @ NET_RDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_rreg(u_long base_addr, u_int reg)
-{
- unsigned short v;
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "ldrh %0, [%2, #-4] @ NET_RDP"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-static inline void write_ireg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #8] @ NET_IDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_ireg(u_long base_addr, u_int reg)
-{
- u_short v;
- asm volatile(
- "strh %1, [%2] @ NAT_RAP\n\t"
- "ldrh %0, [%2, #8] @ NET_IDP\n\t"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
-#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
-
-static void
-am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3");
- asm volatile(
- "ldmia %0!, {%1, %2}"
- : "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
- length -= 8;
- asm volatile(
- "strh %1, [%0], #4\n\t"
- "mov %1, %1, lsr #16\n\t"
- "strh %1, [%0], #4\n\t"
- "strh %2, [%0], #4\n\t"
- "mov %2, %2, lsr #16\n\t"
- "strh %2, [%0], #4"
- : "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
- }
- while (length > 0) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
-}
-
-static void
-am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "ldrh %4, [%0], #4\n\t"
- "ldrh %3, [%0], #4\n\t"
- "orr %2, %2, %4, lsl #16\n\t"
- "ldrh %4, [%0], #4\n\t"
- "orr %3, %3, %4, lsl #16\n\t"
- "stmia %1!, {%2, %3}"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
- : "0" (offset), "1" (buf));
- length -= 8;
- }
- while (length > 0) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
- length -= 2;
- }
-}
-#else
-#error Not compatible
-#endif
-
-static int
-am79c961_ramtest(struct net_device *dev, unsigned int val)
-{
- unsigned char *buffer = kmalloc (65536, GFP_KERNEL);
- int i, error = 0, errorcount = 0;
-
- if (!buffer)
- return 0;
- memset (buffer, val, 65536);
- am_writebuffer(dev, 0, buffer, 65536);
- memset (buffer, val ^ 255, 65536);
- am_readbuffer(dev, 0, buffer, 65536);
- for (i = 0; i < 65536; i++) {
- if (buffer[i] != val && !error) {
- printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i);
- error = 1;
- errorcount ++;
- } else if (error && buffer[i] == val) {
- printk ("%05X\n", i);
- error = 0;
- }
- }
- if (error)
- printk ("10000\n");
- kfree (buffer);
- return errorcount;
-}
-
-static void am79c961_mc_hash(char *addr, u16 *hash)
-{
- int idx, bit;
- u32 crc;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- idx = crc >> 30;
- bit = (crc >> 26) & 15;
-
- hash[idx] |= 1 << bit;
-}
-
-static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash)
-{
- unsigned int mode = MODE_PORT_10BT;
-
- if (dev->flags & IFF_PROMISC) {
- mode |= MODE_PROMISC;
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else if (dev->flags & IFF_ALLMULTI) {
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else {
- struct netdev_hw_addr *ha;
-
- memset(hash, 0, 4 * sizeof(*hash));
-
- netdev_for_each_mc_addr(ha, dev)
- am79c961_mc_hash(ha->addr, hash);
- }
-
- return mode;
-}
-
-static void
-am79c961_init_for_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- unsigned char *p;
- u_int hdr_addr, first_free_addr;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i;
-
- /*
- * Stop the chip.
- */
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
- write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
- write_ireg (dev->base_addr, 7, 0x0090); /* XMIT LED */
- write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
-
- for (i = LADRL; i <= LADRH; i++)
- write_rreg (dev->base_addr, i, multi_hash[i - LADRL]);
-
- for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
- write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
-
- write_rreg (dev->base_addr, MODE, mode);
- write_rreg (dev->base_addr, POLLINT, 0);
- write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
- write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
-
- first_free_addr = RX_BUFFERS * 8 + TX_BUFFERS * 8 + 16;
- hdr_addr = 0;
-
- priv->rxhead = 0;
- priv->rxtail = 0;
- priv->rxhdr = hdr_addr;
-
- for (i = 0; i < RX_BUFFERS; i++) {
- priv->rxbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, RMD_OWN);
- am_writeword (dev, hdr_addr + 4, (-1600));
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
- priv->txhead = 0;
- priv->txtail = 0;
- priv->txhdr = hdr_addr;
- for (i = 0; i < TX_BUFFERS; i++) {
- priv->txbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, TMD_STP|TMD_ENP);
- am_writeword (dev, hdr_addr + 4, 0xf000);
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
-
- write_rreg (dev->base_addr, BASERXL, priv->rxhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, BASETXL, priv->txhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_IDONM|CSR3_BABLM|CSR3_DXSUFLO);
- write_rreg (dev->base_addr, CSR4, CSR4_APAD_XMIT|CSR4_MFCOM|CSR4_RCVCCOM|CSR4_TXSTRTM|CSR4_JABM);
- write_rreg (dev->base_addr, CSR0, CSR0_IENA|CSR0_STRT);
-}
-
-static void am79c961_timer(struct timer_list *t)
-{
- struct dev_priv *priv = from_timer(priv, t, timer);
- struct net_device *dev = priv->dev;
- unsigned int lnkstat, carrier;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- carrier = netif_carrier_ok(dev);
-
- if (lnkstat && !carrier) {
- netif_carrier_on(dev);
- printk("%s: link up\n", dev->name);
- } else if (!lnkstat && carrier) {
- netif_carrier_off(dev);
- printk("%s: link down\n", dev->name);
- }
-
- mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500));
-}
-
-/*
- * Open/initialize the board.
- */
-static int
-am79c961_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- int ret;
-
- ret = request_irq(dev->irq, am79c961_interrupt, 0, dev->name, dev);
- if (ret)
- return ret;
-
- am79c961_init_for_open(dev);
-
- netif_carrier_off(dev);
-
- priv->timer.expires = jiffies;
- add_timer(&priv->timer);
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-/*
- * The inverse routine to am79c961_open().
- */
-static int
-am79c961_close(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
-
- del_timer_sync(&priv->timer);
-
- netif_stop_queue(dev);
- netif_carrier_off(dev);
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- free_irq (dev->irq, dev);
-
- return 0;
-}
-
-/*
- * Set or clear promiscuous/multicast mode filter for this adapter.
- */
-static void am79c961_setmulticastlist (struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i, stopped;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
-
- stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
-
- if (!stopped) {
- /*
- * Put the chip into suspend mode
- */
- write_rreg(dev->base_addr, CTRL1, CTRL1_SPND);
-
- /*
- * Spin waiting for chip to report suspend mode
- */
- while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- nop();
- spin_lock_irqsave(&priv->chip_lock, flags);
- }
- }
-
- /*
- * Update the multicast hash table
- */
- for (i = 0; i < ARRAY_SIZE(multi_hash); i++)
- write_rreg(dev->base_addr, i + LADRL, multi_hash[i]);
-
- /*
- * Write the mode register
- */
- write_rreg(dev->base_addr, MODE, mode);
-
- if (!stopped) {
- /*
- * Put the chip back into running mode
- */
- write_rreg(dev->base_addr, CTRL1, 0);
- }
-
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-}
-
-static void am79c961_timeout(struct net_device *dev, unsigned int txqueue)
-{
- printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n",
- dev->name);
-
- /*
- * ought to do some setup of the tx side here
- */
-
- netif_wake_queue(dev);
-}
-
-/*
- * Transmit a packet
- */
-static netdev_tx_t
-am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned int hdraddr, bufaddr;
- unsigned int head;
- unsigned long flags;
-
- head = priv->txhead;
- hdraddr = priv->txhdr + (head << 3);
- bufaddr = priv->txbuffer[head];
- head += 1;
- if (head >= TX_BUFFERS)
- head = 0;
-
- am_writebuffer (dev, bufaddr, skb->data, skb->len);
- am_writeword (dev, hdraddr + 4, -skb->len);
- am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
- priv->txhead = head;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- /*
- * If the next packet is owned by the ethernet device,
- * then the tx ring is full and we can't add another
- * packet.
- */
- if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN)
- netif_stop_queue(dev);
-
- dev_consume_skb_any(skb);
-
- return NETDEV_TX_OK;
-}
-
-/*
- * If we have a good packet(s), get it/them out of the buffers.
- */
-static void
-am79c961_rx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- struct sk_buff *skb;
- u_int hdraddr;
- u_int pktaddr;
- u_int status;
- int len;
-
- hdraddr = priv->rxhdr + (priv->rxtail << 3);
- pktaddr = priv->rxbuffer[priv->rxtail];
-
- status = am_readword (dev, hdraddr + 2);
- if (status & RMD_OWN) /* do we own it? */
- break;
-
- priv->rxtail ++;
- if (priv->rxtail >= RX_BUFFERS)
- priv->rxtail = 0;
-
- if ((status & (RMD_ERR|RMD_STP|RMD_ENP)) != (RMD_STP|RMD_ENP)) {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_errors++;
- if (status & RMD_ERR) {
- if (status & RMD_FRAM)
- dev->stats.rx_frame_errors++;
- if (status & RMD_CRC)
- dev->stats.rx_crc_errors++;
- } else if (status & RMD_STP)
- dev->stats.rx_length_errors++;
- continue;
- }
-
- len = am_readword(dev, hdraddr + 6);
- skb = netdev_alloc_skb(dev, len + 2);
-
- if (skb) {
- skb_reserve(skb, 2);
-
- am_readbuffer(dev, pktaddr, skb_put(skb, len), len);
- am_writeword(dev, hdraddr + 2, RMD_OWN);
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_bytes += len;
- dev->stats.rx_packets++;
- } else {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_dropped++;
- break;
- }
- } while (1);
-}
-
-/*
- * Update stats for the transmitted packet
- */
-static void
-am79c961_tx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- short len;
- u_int hdraddr;
- u_int status;
-
- hdraddr = priv->txhdr + (priv->txtail << 3);
- status = am_readword (dev, hdraddr + 2);
- if (status & TMD_OWN)
- break;
-
- priv->txtail ++;
- if (priv->txtail >= TX_BUFFERS)
- priv->txtail = 0;
-
- if (status & TMD_ERR) {
- u_int status2;
-
- dev->stats.tx_errors++;
-
- status2 = am_readword (dev, hdraddr + 6);
-
- /*
- * Clear the error byte
- */
- am_writeword (dev, hdraddr + 6, 0);
-
- if (status2 & TST_RTRY)
- dev->stats.collisions += 16;
- if (status2 & TST_LCOL)
- dev->stats.tx_window_errors++;
- if (status2 & TST_LCAR)
- dev->stats.tx_carrier_errors++;
- if (status2 & TST_UFLO)
- dev->stats.tx_fifo_errors++;
- continue;
- }
- dev->stats.tx_packets++;
- len = am_readword (dev, hdraddr + 4);
- dev->stats.tx_bytes += -len;
- } while (priv->txtail != priv->txhead);
-
- netif_wake_queue(dev);
-}
-
-static irqreturn_t
-am79c961_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct dev_priv *priv = netdev_priv(dev);
- u_int status, n = 100;
- int handled = 0;
-
- do {
- status = read_rreg(dev->base_addr, CSR0);
- write_rreg(dev->base_addr, CSR0, status &
- (CSR0_IENA|CSR0_TINT|CSR0_RINT|
- CSR0_MERR|CSR0_MISS|CSR0_CERR|CSR0_BABL));
-
- if (status & CSR0_RINT) {
- handled = 1;
- am79c961_rx(dev, priv);
- }
- if (status & CSR0_TINT) {
- handled = 1;
- am79c961_tx(dev, priv);
- }
- if (status & CSR0_MISS) {
- handled = 1;
- dev->stats.rx_dropped++;
- }
- if (status & CSR0_CERR) {
- handled = 1;
- mod_timer(&priv->timer, jiffies);
- }
- } while (--n && status & (CSR0_RINT | CSR0_TINT));
-
- return IRQ_RETVAL(handled);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void am79c961_poll_controller(struct net_device *dev)
-{
- unsigned long flags;
- local_irq_save(flags);
- am79c961_interrupt(dev->irq, dev);
- local_irq_restore(flags);
-}
-#endif
-
-/*
- * Initialise the chip. Note that we always expect
- * to be entered with interrupts enabled.
- */
-static int
-am79c961_hw_init(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
-
- spin_lock_irq(&priv->chip_lock);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irq(&priv->chip_lock);
-
- am79c961_ramtest(dev, 0x66);
- am79c961_ramtest(dev, 0x99);
-
- return 0;
-}
-
-static void __init am79c961_banner(void)
-{
- static unsigned version_printed;
-
- if (net_debug && version_printed++ == 0)
- printk(KERN_INFO "%s", version);
-}
-static const struct net_device_ops am79c961_netdev_ops = {
- .ndo_open = am79c961_open,
- .ndo_stop = am79c961_close,
- .ndo_start_xmit = am79c961_sendpacket,
- .ndo_set_rx_mode = am79c961_setmulticastlist,
- .ndo_tx_timeout = am79c961_timeout,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = am79c961_poll_controller,
-#endif
-};
-
-static int am79c961_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct net_device *dev;
- struct dev_priv *priv;
- int i, ret;
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!res)
- return -ENODEV;
-
- dev = alloc_etherdev(sizeof(struct dev_priv));
- ret = -ENOMEM;
- if (!dev)
- goto out;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- priv = netdev_priv(dev);
-
- /*
- * Fixed address and IRQ lines here.
- * The PNP initialisation should have been
- * done by the ether bootp loader.
- */
- dev->base_addr = res->start;
- ret = platform_get_irq(pdev, 0);
-
- if (ret < 0) {
- ret = -ENODEV;
- goto nodev;
- }
- dev->irq = ret;
-
- ret = -ENODEV;
- if (!request_region(dev->base_addr, 0x18, dev->name))
- goto nodev;
-
- /*
- * Reset the device.
- */
- inb(dev->base_addr + NET_RESET);
- udelay(5);
-
- /*
- * Check the manufacturer part of the
- * ether address.
- */
- if (inb(dev->base_addr) != 0x08 ||
- inb(dev->base_addr + 2) != 0x00 ||
- inb(dev->base_addr + 4) != 0x2b)
- goto release;
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
-
- am79c961_banner();
-
- spin_lock_init(&priv->chip_lock);
- priv->dev = dev;
- timer_setup(&priv->timer, am79c961_timer, 0);
-
- if (am79c961_hw_init(dev))
- goto release;
-
- dev->netdev_ops = &am79c961_netdev_ops;
-
- ret = register_netdev(dev);
- if (ret == 0) {
- printk(KERN_INFO "%s: ether address %pM\n",
- dev->name, dev->dev_addr);
- return 0;
- }
-
-release:
- release_region(dev->base_addr, 0x18);
-nodev:
- free_netdev(dev);
-out:
- return ret;
-}
-
-static struct platform_driver am79c961_driver = {
- .probe = am79c961_probe,
- .driver = {
- .name = "am79c961",
- },
-};
-
-static int __init am79c961_init(void)
-{
- return platform_driver_register(&am79c961_driver);
-}
-
-__initcall(am79c961_init);
diff --git a/drivers/net/ethernet/amd/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h
deleted file mode 100644
index 73679e053ceb..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.h
- */
-
-#ifndef _LINUX_am79c961a_H
-#define _LINUX_am79c961a_H
-
-/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
-#define DEBUG_TX 2
-#define DEBUG_RX 4
-#define DEBUG_INT 8
-#define DEBUG_IC 16
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-
-#define NET_UID 0
-#define NET_RDP 0x10
-#define NET_RAP 0x12
-#define NET_RESET 0x14
-#define NET_IDP 0x16
-
-/*
- * RAP registers
- */
-#define CSR0 0
-#define CSR0_INIT 0x0001
-#define CSR0_STRT 0x0002
-#define CSR0_STOP 0x0004
-#define CSR0_TDMD 0x0008
-#define CSR0_TXON 0x0010
-#define CSR0_RXON 0x0020
-#define CSR0_IENA 0x0040
-#define CSR0_INTR 0x0080
-#define CSR0_IDON 0x0100
-#define CSR0_TINT 0x0200
-#define CSR0_RINT 0x0400
-#define CSR0_MERR 0x0800
-#define CSR0_MISS 0x1000
-#define CSR0_CERR 0x2000
-#define CSR0_BABL 0x4000
-#define CSR0_ERR 0x8000
-
-#define CSR3 3
-#define CSR3_EMBA 0x0008
-#define CSR3_DXMT2PD 0x0010
-#define CSR3_LAPPEN 0x0020
-#define CSR3_DXSUFLO 0x0040
-#define CSR3_IDONM 0x0100
-#define CSR3_TINTM 0x0200
-#define CSR3_RINTM 0x0400
-#define CSR3_MERRM 0x0800
-#define CSR3_MISSM 0x1000
-#define CSR3_BABLM 0x4000
-#define CSR3_MASKALL 0x5F00
-
-#define CSR4 4
-#define CSR4_JABM 0x0001
-#define CSR4_JAB 0x0002
-#define CSR4_TXSTRTM 0x0004
-#define CSR4_TXSTRT 0x0008
-#define CSR4_RCVCCOM 0x0010
-#define CSR4_RCVCCO 0x0020
-#define CSR4_MFCOM 0x0100
-#define CSR4_MFCO 0x0200
-#define CSR4_ASTRP_RCV 0x0400
-#define CSR4_APAD_XMIT 0x0800
-
-#define CTRL1 5
-#define CTRL1_SPND 0x0001
-
-#define LADRL 8
-#define LADRM1 9
-#define LADRM2 10
-#define LADRH 11
-#define PADRL 12
-#define PADRM 13
-#define PADRH 14
-
-#define MODE 15
-#define MODE_DISRX 0x0001
-#define MODE_DISTX 0x0002
-#define MODE_LOOP 0x0004
-#define MODE_DTCRC 0x0008
-#define MODE_COLL 0x0010
-#define MODE_DRETRY 0x0020
-#define MODE_INTLOOP 0x0040
-#define MODE_PORT_AUI 0x0000
-#define MODE_PORT_10BT 0x0080
-#define MODE_DRXPA 0x2000
-#define MODE_DRXBA 0x4000
-#define MODE_PROMISC 0x8000
-
-#define BASERXL 24
-#define BASERXH 25
-#define BASETXL 30
-#define BASETXH 31
-
-#define POLLINT 47
-
-#define SIZERXR 76
-#define SIZETXR 78
-
-#define CSR_MFC 112
-
-#define RMD_ENP 0x0100
-#define RMD_STP 0x0200
-#define RMD_CRC 0x0800
-#define RMD_FRAM 0x2000
-#define RMD_ERR 0x4000
-#define RMD_OWN 0x8000
-
-#define TMD_ENP 0x0100
-#define TMD_STP 0x0200
-#define TMD_MORE 0x1000
-#define TMD_ERR 0x4000
-#define TMD_OWN 0x8000
-
-#define TST_RTRY 0x0400
-#define TST_LCAR 0x0800
-#define TST_LCOL 0x1000
-#define TST_UFLO 0x4000
-#define TST_BUFF 0x8000
-
-#define ISALED0 0x0004
-#define ISALED0_LNKST 0x8000
-
-struct dev_priv {
- unsigned long rxbuffer[RX_BUFFERS];
- unsigned long txbuffer[TX_BUFFERS];
- unsigned char txhead;
- unsigned char txtail;
- unsigned char rxhead;
- unsigned char rxtail;
- unsigned long rxhdr;
- unsigned long txhdr;
- spinlock_t chip_lock;
- struct timer_list timer;
- struct net_device *dev;
-};
-
-#endif
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 03/15] timekeeping: remove arch_gettimeoffset
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../time/modern-timekeeping/arch-support.txt | 33 -------------------
drivers/Makefile | 2 --
drivers/clocksource/Kconfig | 2 +-
include/linux/time.h | 13 --------
kernel/time/Kconfig | 9 -----
kernel/time/clocksource.c | 8 -----
kernel/time/timekeeping.c | 25 +-------------
kernel/trace/Kconfig | 2 --
8 files changed, 2 insertions(+), 92 deletions(-)
delete mode 100644 Documentation/features/time/modern-timekeeping/arch-support.txt
diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt
deleted file mode 100644
index a84c3b9d9a94..000000000000
--- a/Documentation/features/time/modern-timekeeping/arch-support.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# Feature name: modern-timekeeping
-# Kconfig: !ARCH_USES_GETTIMEOFFSET
-# description: arch does not use arch_gettimeoffset() anymore
-#
- -----------------------
- | arch |status|
- -----------------------
- | alpha: | ok |
- | arc: | ok |
- | arm: | TODO |
- | arm64: | ok |
- | c6x: | ok |
- | csky: | ok |
- | h8300: | ok |
- | hexagon: | ok |
- | ia64: | ok |
- | m68k: | ok |
- | microblaze: | ok |
- | mips: | ok |
- | nds32: | ok |
- | nios2: | ok |
- | openrisc: | ok |
- | parisc: | ok |
- | powerpc: | ok |
- | riscv: | ok |
- | s390: | ok |
- | sh: | ok |
- | sparc: | ok |
- | um: | ok |
- | x86: | ok |
- | xtensa: | ok |
- -----------------------
diff --git a/drivers/Makefile b/drivers/Makefile
index c0cd1b9075e3..4ff1e4459512 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -135,9 +135,7 @@ obj-$(CONFIG_INFINIBAND) += infiniband/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
-ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
obj-y += clocksource/
-endif
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 68b087bff59c..764936bfcb2c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -563,7 +563,7 @@ config CLKSRC_QCOM
config CLKSRC_VERSATILE
bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
- depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
+ depends on GENERIC_SCHED_CLOCK
select TIMER_OF
default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM
help
diff --git a/include/linux/time.h b/include/linux/time.h
index b142cb5f5a53..16cf4522d6f3 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -21,19 +21,6 @@ extern time64_t mktime64(const unsigned int year, const unsigned int mon,
const unsigned int day, const unsigned int hour,
const unsigned int min, const unsigned int sec);
-/* Some architectures do not supply their own clocksource.
- * This is mainly the case in architectures that get their
- * inter-tick times by reading the counter on their interval
- * timer. Since these timers wrap every tick, they're not really
- * useful as clocksources. Wrapping them to act like one is possible
- * but not very efficient. So we provide a callout these arches
- * can implement for use with the jiffies clocksource to provide
- * finer then tick granular time.
- */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 (*arch_gettimeoffset)(void);
-#endif
-
#ifdef CONFIG_POSIX_TIMERS
extern void clear_itimer(void);
#else
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index a09b1d61df6a..51d298ccbe05 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -26,10 +26,6 @@ config CLOCKSOURCE_VALIDATE_LAST_CYCLE
config GENERIC_TIME_VSYSCALL
bool
-# Old style timekeeping
-config ARCH_USES_GETTIMEOFFSET
- bool
-
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
bool
@@ -72,7 +68,6 @@ config TICK_ONESHOT
config NO_HZ_COMMON
bool
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
choice
@@ -87,7 +82,6 @@ config HZ_PERIODIC
config NO_HZ_IDLE
bool "Idle dynticks system (tickless idle)"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select NO_HZ_COMMON
help
This option enables a tickless idle system: timer interrupts
@@ -99,7 +93,6 @@ config NO_HZ_IDLE
config NO_HZ_FULL
bool "Full dynticks system (tickless)"
# NO_HZ_COMMON dependency
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
# We need at least one periodic CPU for timekeeping
depends on SMP
depends on HAVE_CONTEXT_TRACKING
@@ -158,7 +151,6 @@ config CONTEXT_TRACKING_FORCE
config NO_HZ
bool "Old Idle dynticks config"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
help
This is the old config entry that enables dynticks idle.
We keep it around for a little while to enforce backward
@@ -166,7 +158,6 @@ config NO_HZ
config HIGH_RES_TIMERS
bool "High Resolution Timer Support"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
help
This option enables high resolution timer support. If your
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 02441ead3c3b..cce484a2cc7c 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -705,8 +705,6 @@ static inline void clocksource_update_max_deferment(struct clocksource *cs)
&cs->max_cycles);
}
-#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
-
static struct clocksource *clocksource_find_best(bool oneshot, bool skipcur)
{
struct clocksource *cs;
@@ -798,12 +796,6 @@ static void clocksource_select_fallback(void)
__clocksource_select(true);
}
-#else /* !CONFIG_ARCH_USES_GETTIMEOFFSET */
-static inline void clocksource_select(void) { }
-static inline void clocksource_select_fallback(void) { }
-
-#endif
-
/*
* clocksource_done_booting - Called near the end of core bootup
*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 6858a31364b6..52fff7e9edcd 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -369,13 +369,6 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
/* Timekeeper helper functions. */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-static u32 default_arch_gettimeoffset(void) { return 0; }
-u32 (*arch_gettimeoffset)(void) = default_arch_gettimeoffset;
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
-#endif
-
static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 delta)
{
u64 nsec;
@@ -383,8 +376,7 @@ static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 de
nsec = delta * tkr->mult + tkr->xtime_nsec;
nsec >>= tkr->shift;
- /* If arch requires, add in get_arch_timeoffset() */
- return nsec + arch_gettimeoffset();
+ return nsec;
}
static inline u64 timekeeping_get_ns(const struct tk_read_base *tkr)
@@ -778,16 +770,8 @@ static void timekeeping_forward_now(struct timekeeper *tk)
tk->tkr_raw.cycle_last = cycle_now;
tk->tkr_mono.xtime_nsec += delta * tk->tkr_mono.mult;
-
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_mono.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_mono.shift;
-
-
tk->tkr_raw.xtime_nsec += delta * tk->tkr_raw.mult;
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_raw.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_raw.shift;
-
tk_normalize_xtime(tk);
}
@@ -2133,19 +2117,12 @@ static void timekeeping_advance(enum timekeeping_adv_mode mode)
if (unlikely(timekeeping_suspended))
goto out;
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
- offset = real_tk->cycle_interval;
-
- if (mode != TK_ADV_TICK)
- goto out;
-#else
offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
/* Check if there's really nothing to do */
if (offset < real_tk->cycle_interval && mode == TK_ADV_TICK)
goto out;
-#endif
/* Do some additional sanity checking */
timekeeping_check_update(tk, offset);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a4020c0b4508..b74099f990bf 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -253,7 +253,6 @@ config IRQSOFF_TRACER
bool "Interrupts-off Latency Tracer"
default n
depends on TRACE_IRQFLAGS_SUPPORT
- depends on !ARCH_USES_GETTIMEOFFSET
select TRACE_IRQFLAGS
select GENERIC_TRACER
select TRACER_MAX_TRACE
@@ -277,7 +276,6 @@ config IRQSOFF_TRACER
config PREEMPT_TRACER
bool "Preemption-off Latency Tracer"
default n
- depends on !ARCH_USES_GETTIMEOFFSET
depends on PREEMPTION
select GENERIC_TRACER
select TRACER_MAX_TRACE
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 03/15] timekeeping: remove arch_gettimeoffset
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../time/modern-timekeeping/arch-support.txt | 33 -------------------
drivers/Makefile | 2 --
drivers/clocksource/Kconfig | 2 +-
include/linux/time.h | 13 --------
kernel/time/Kconfig | 9 -----
kernel/time/clocksource.c | 8 -----
kernel/time/timekeeping.c | 25 +-------------
kernel/trace/Kconfig | 2 --
8 files changed, 2 insertions(+), 92 deletions(-)
delete mode 100644 Documentation/features/time/modern-timekeeping/arch-support.txt
diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt
deleted file mode 100644
index a84c3b9d9a94..000000000000
--- a/Documentation/features/time/modern-timekeeping/arch-support.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# Feature name: modern-timekeeping
-# Kconfig: !ARCH_USES_GETTIMEOFFSET
-# description: arch does not use arch_gettimeoffset() anymore
-#
- -----------------------
- | arch |status|
- -----------------------
- | alpha: | ok |
- | arc: | ok |
- | arm: | TODO |
- | arm64: | ok |
- | c6x: | ok |
- | csky: | ok |
- | h8300: | ok |
- | hexagon: | ok |
- | ia64: | ok |
- | m68k: | ok |
- | microblaze: | ok |
- | mips: | ok |
- | nds32: | ok |
- | nios2: | ok |
- | openrisc: | ok |
- | parisc: | ok |
- | powerpc: | ok |
- | riscv: | ok |
- | s390: | ok |
- | sh: | ok |
- | sparc: | ok |
- | um: | ok |
- | x86: | ok |
- | xtensa: | ok |
- -----------------------
diff --git a/drivers/Makefile b/drivers/Makefile
index c0cd1b9075e3..4ff1e4459512 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -135,9 +135,7 @@ obj-$(CONFIG_INFINIBAND) += infiniband/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
-ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
obj-y += clocksource/
-endif
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 68b087bff59c..764936bfcb2c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -563,7 +563,7 @@ config CLKSRC_QCOM
config CLKSRC_VERSATILE
bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
- depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
+ depends on GENERIC_SCHED_CLOCK
select TIMER_OF
default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM
help
diff --git a/include/linux/time.h b/include/linux/time.h
index b142cb5f5a53..16cf4522d6f3 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -21,19 +21,6 @@ extern time64_t mktime64(const unsigned int year, const unsigned int mon,
const unsigned int day, const unsigned int hour,
const unsigned int min, const unsigned int sec);
-/* Some architectures do not supply their own clocksource.
- * This is mainly the case in architectures that get their
- * inter-tick times by reading the counter on their interval
- * timer. Since these timers wrap every tick, they're not really
- * useful as clocksources. Wrapping them to act like one is possible
- * but not very efficient. So we provide a callout these arches
- * can implement for use with the jiffies clocksource to provide
- * finer then tick granular time.
- */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 (*arch_gettimeoffset)(void);
-#endif
-
#ifdef CONFIG_POSIX_TIMERS
extern void clear_itimer(void);
#else
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index a09b1d61df6a..51d298ccbe05 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -26,10 +26,6 @@ config CLOCKSOURCE_VALIDATE_LAST_CYCLE
config GENERIC_TIME_VSYSCALL
bool
-# Old style timekeeping
-config ARCH_USES_GETTIMEOFFSET
- bool
-
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
bool
@@ -72,7 +68,6 @@ config TICK_ONESHOT
config NO_HZ_COMMON
bool
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
choice
@@ -87,7 +82,6 @@ config HZ_PERIODIC
config NO_HZ_IDLE
bool "Idle dynticks system (tickless idle)"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select NO_HZ_COMMON
help
This option enables a tickless idle system: timer interrupts
@@ -99,7 +93,6 @@ config NO_HZ_IDLE
config NO_HZ_FULL
bool "Full dynticks system (tickless)"
# NO_HZ_COMMON dependency
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
# We need at least one periodic CPU for timekeeping
depends on SMP
depends on HAVE_CONTEXT_TRACKING
@@ -158,7 +151,6 @@ config CONTEXT_TRACKING_FORCE
config NO_HZ
bool "Old Idle dynticks config"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
help
This is the old config entry that enables dynticks idle.
We keep it around for a little while to enforce backward
@@ -166,7 +158,6 @@ config NO_HZ
config HIGH_RES_TIMERS
bool "High Resolution Timer Support"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
help
This option enables high resolution timer support. If your
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 02441ead3c3b..cce484a2cc7c 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -705,8 +705,6 @@ static inline void clocksource_update_max_deferment(struct clocksource *cs)
&cs->max_cycles);
}
-#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
-
static struct clocksource *clocksource_find_best(bool oneshot, bool skipcur)
{
struct clocksource *cs;
@@ -798,12 +796,6 @@ static void clocksource_select_fallback(void)
__clocksource_select(true);
}
-#else /* !CONFIG_ARCH_USES_GETTIMEOFFSET */
-static inline void clocksource_select(void) { }
-static inline void clocksource_select_fallback(void) { }
-
-#endif
-
/*
* clocksource_done_booting - Called near the end of core bootup
*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 6858a31364b6..52fff7e9edcd 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -369,13 +369,6 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
/* Timekeeper helper functions. */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-static u32 default_arch_gettimeoffset(void) { return 0; }
-u32 (*arch_gettimeoffset)(void) = default_arch_gettimeoffset;
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
-#endif
-
static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 delta)
{
u64 nsec;
@@ -383,8 +376,7 @@ static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 de
nsec = delta * tkr->mult + tkr->xtime_nsec;
nsec >>= tkr->shift;
- /* If arch requires, add in get_arch_timeoffset() */
- return nsec + arch_gettimeoffset();
+ return nsec;
}
static inline u64 timekeeping_get_ns(const struct tk_read_base *tkr)
@@ -778,16 +770,8 @@ static void timekeeping_forward_now(struct timekeeper *tk)
tk->tkr_raw.cycle_last = cycle_now;
tk->tkr_mono.xtime_nsec += delta * tk->tkr_mono.mult;
-
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_mono.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_mono.shift;
-
-
tk->tkr_raw.xtime_nsec += delta * tk->tkr_raw.mult;
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_raw.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_raw.shift;
-
tk_normalize_xtime(tk);
}
@@ -2133,19 +2117,12 @@ static void timekeeping_advance(enum timekeeping_adv_mode mode)
if (unlikely(timekeeping_suspended))
goto out;
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
- offset = real_tk->cycle_interval;
-
- if (mode != TK_ADV_TICK)
- goto out;
-#else
offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
/* Check if there's really nothing to do */
if (offset < real_tk->cycle_interval && mode = TK_ADV_TICK)
goto out;
-#endif
/* Do some additional sanity checking */
timekeeping_check_update(tk, offset);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a4020c0b4508..b74099f990bf 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -253,7 +253,6 @@ config IRQSOFF_TRACER
bool "Interrupts-off Latency Tracer"
default n
depends on TRACE_IRQFLAGS_SUPPORT
- depends on !ARCH_USES_GETTIMEOFFSET
select TRACE_IRQFLAGS
select GENERIC_TRACER
select TRACER_MAX_TRACE
@@ -277,7 +276,6 @@ config IRQSOFF_TRACER
config PREEMPT_TRACER
bool "Preemption-off Latency Tracer"
default n
- depends on !ARCH_USES_GETTIMEOFFSET
depends on PREEMPTION
select GENERIC_TRACER
select TRACER_MAX_TRACE
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 03/15] timekeeping: remove arch_gettimeoffset
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../time/modern-timekeeping/arch-support.txt | 33 -------------------
drivers/Makefile | 2 --
drivers/clocksource/Kconfig | 2 +-
include/linux/time.h | 13 --------
kernel/time/Kconfig | 9 -----
kernel/time/clocksource.c | 8 -----
kernel/time/timekeeping.c | 25 +-------------
kernel/trace/Kconfig | 2 --
8 files changed, 2 insertions(+), 92 deletions(-)
delete mode 100644 Documentation/features/time/modern-timekeeping/arch-support.txt
diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt
deleted file mode 100644
index a84c3b9d9a94..000000000000
--- a/Documentation/features/time/modern-timekeeping/arch-support.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# Feature name: modern-timekeeping
-# Kconfig: !ARCH_USES_GETTIMEOFFSET
-# description: arch does not use arch_gettimeoffset() anymore
-#
- -----------------------
- | arch |status|
- -----------------------
- | alpha: | ok |
- | arc: | ok |
- | arm: | TODO |
- | arm64: | ok |
- | c6x: | ok |
- | csky: | ok |
- | h8300: | ok |
- | hexagon: | ok |
- | ia64: | ok |
- | m68k: | ok |
- | microblaze: | ok |
- | mips: | ok |
- | nds32: | ok |
- | nios2: | ok |
- | openrisc: | ok |
- | parisc: | ok |
- | powerpc: | ok |
- | riscv: | ok |
- | s390: | ok |
- | sh: | ok |
- | sparc: | ok |
- | um: | ok |
- | x86: | ok |
- | xtensa: | ok |
- -----------------------
diff --git a/drivers/Makefile b/drivers/Makefile
index c0cd1b9075e3..4ff1e4459512 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -135,9 +135,7 @@ obj-$(CONFIG_INFINIBAND) += infiniband/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
-ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
obj-y += clocksource/
-endif
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 68b087bff59c..764936bfcb2c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -563,7 +563,7 @@ config CLKSRC_QCOM
config CLKSRC_VERSATILE
bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
- depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
+ depends on GENERIC_SCHED_CLOCK
select TIMER_OF
default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM
help
diff --git a/include/linux/time.h b/include/linux/time.h
index b142cb5f5a53..16cf4522d6f3 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -21,19 +21,6 @@ extern time64_t mktime64(const unsigned int year, const unsigned int mon,
const unsigned int day, const unsigned int hour,
const unsigned int min, const unsigned int sec);
-/* Some architectures do not supply their own clocksource.
- * This is mainly the case in architectures that get their
- * inter-tick times by reading the counter on their interval
- * timer. Since these timers wrap every tick, they're not really
- * useful as clocksources. Wrapping them to act like one is possible
- * but not very efficient. So we provide a callout these arches
- * can implement for use with the jiffies clocksource to provide
- * finer then tick granular time.
- */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 (*arch_gettimeoffset)(void);
-#endif
-
#ifdef CONFIG_POSIX_TIMERS
extern void clear_itimer(void);
#else
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index a09b1d61df6a..51d298ccbe05 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -26,10 +26,6 @@ config CLOCKSOURCE_VALIDATE_LAST_CYCLE
config GENERIC_TIME_VSYSCALL
bool
-# Old style timekeeping
-config ARCH_USES_GETTIMEOFFSET
- bool
-
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
bool
@@ -72,7 +68,6 @@ config TICK_ONESHOT
config NO_HZ_COMMON
bool
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
choice
@@ -87,7 +82,6 @@ config HZ_PERIODIC
config NO_HZ_IDLE
bool "Idle dynticks system (tickless idle)"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select NO_HZ_COMMON
help
This option enables a tickless idle system: timer interrupts
@@ -99,7 +93,6 @@ config NO_HZ_IDLE
config NO_HZ_FULL
bool "Full dynticks system (tickless)"
# NO_HZ_COMMON dependency
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
# We need at least one periodic CPU for timekeeping
depends on SMP
depends on HAVE_CONTEXT_TRACKING
@@ -158,7 +151,6 @@ config CONTEXT_TRACKING_FORCE
config NO_HZ
bool "Old Idle dynticks config"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
help
This is the old config entry that enables dynticks idle.
We keep it around for a little while to enforce backward
@@ -166,7 +158,6 @@ config NO_HZ
config HIGH_RES_TIMERS
bool "High Resolution Timer Support"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
help
This option enables high resolution timer support. If your
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 02441ead3c3b..cce484a2cc7c 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -705,8 +705,6 @@ static inline void clocksource_update_max_deferment(struct clocksource *cs)
&cs->max_cycles);
}
-#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
-
static struct clocksource *clocksource_find_best(bool oneshot, bool skipcur)
{
struct clocksource *cs;
@@ -798,12 +796,6 @@ static void clocksource_select_fallback(void)
__clocksource_select(true);
}
-#else /* !CONFIG_ARCH_USES_GETTIMEOFFSET */
-static inline void clocksource_select(void) { }
-static inline void clocksource_select_fallback(void) { }
-
-#endif
-
/*
* clocksource_done_booting - Called near the end of core bootup
*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 6858a31364b6..52fff7e9edcd 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -369,13 +369,6 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
/* Timekeeper helper functions. */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-static u32 default_arch_gettimeoffset(void) { return 0; }
-u32 (*arch_gettimeoffset)(void) = default_arch_gettimeoffset;
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
-#endif
-
static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 delta)
{
u64 nsec;
@@ -383,8 +376,7 @@ static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 de
nsec = delta * tkr->mult + tkr->xtime_nsec;
nsec >>= tkr->shift;
- /* If arch requires, add in get_arch_timeoffset() */
- return nsec + arch_gettimeoffset();
+ return nsec;
}
static inline u64 timekeeping_get_ns(const struct tk_read_base *tkr)
@@ -778,16 +770,8 @@ static void timekeeping_forward_now(struct timekeeper *tk)
tk->tkr_raw.cycle_last = cycle_now;
tk->tkr_mono.xtime_nsec += delta * tk->tkr_mono.mult;
-
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_mono.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_mono.shift;
-
-
tk->tkr_raw.xtime_nsec += delta * tk->tkr_raw.mult;
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_raw.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_raw.shift;
-
tk_normalize_xtime(tk);
}
@@ -2133,19 +2117,12 @@ static void timekeeping_advance(enum timekeeping_adv_mode mode)
if (unlikely(timekeeping_suspended))
goto out;
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
- offset = real_tk->cycle_interval;
-
- if (mode != TK_ADV_TICK)
- goto out;
-#else
offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
/* Check if there's really nothing to do */
if (offset < real_tk->cycle_interval && mode == TK_ADV_TICK)
goto out;
-#endif
/* Do some additional sanity checking */
timekeeping_check_update(tk, offset);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a4020c0b4508..b74099f990bf 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -253,7 +253,6 @@ config IRQSOFF_TRACER
bool "Interrupts-off Latency Tracer"
default n
depends on TRACE_IRQFLAGS_SUPPORT
- depends on !ARCH_USES_GETTIMEOFFSET
select TRACE_IRQFLAGS
select GENERIC_TRACER
select TRACER_MAX_TRACE
@@ -277,7 +276,6 @@ config IRQSOFF_TRACER
config PREEMPT_TRACER
bool "Preemption-off Latency Tracer"
default n
- depends on !ARCH_USES_GETTIMEOFFSET
depends on PREEMPTION
select GENERIC_TRACER
select TRACER_MAX_TRACE
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 04/15] timekeeping: add CONFIG_LEGACY_TIMER_TICK
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
All platforms that currently do not use generic clockevents roughly call
the same set of functions in their timer interrupts: xtime_update(),
update_process_times() and profile_tick(), sometimes in a different
sequence.
Add a helper function that performs all three of them, to make the
callers more uniform and simplify the interface.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
include/linux/timekeeping.h | 1 +
kernel/time/Kconfig | 7 +++++++
kernel/time/Makefile | 1 +
kernel/time/tick-legacy.c | 19 +++++++++++++++++++
4 files changed, 28 insertions(+)
create mode 100644 kernel/time/tick-legacy.c
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 7f7e4a3f4394..3670cb1670ff 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -12,6 +12,7 @@ extern int timekeeping_suspended;
/* Architecture timer tick functions: */
extern void update_process_times(int user);
extern void xtime_update(unsigned long ticks);
+extern void legacy_timer_tick(unsigned long ticks);
/*
* Get and set timeofday
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 51d298ccbe05..c6867f29d279 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -57,6 +57,13 @@ config POSIX_CPU_TIMERS_TASK_WORK
bool
default y if POSIX_TIMERS && HAVE_POSIX_CPU_TIMERS_TASK_WORK
+config LEGACY_TIMER_TICK
+ bool
+ help
+ The legacy timer tick helper is used by platforms that
+ lack support for the generic clockevent framework.
+ New platforms should use generic clockevents instead.
+
if GENERIC_CLOCKEVENTS
menu "Timers subsystem"
diff --git a/kernel/time/Makefile b/kernel/time/Makefile
index c8f00168afe8..1fb1c1ef6a19 100644
--- a/kernel/time/Makefile
+++ b/kernel/time/Makefile
@@ -16,6 +16,7 @@ ifeq ($(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST),y)
endif
obj-$(CONFIG_GENERIC_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_TICK_ONESHOT) += tick-oneshot.o tick-sched.o
+obj-$(CONFIG_LEGACY_TIMER_TICK) += tick-legacy.o
obj-$(CONFIG_HAVE_GENERIC_VDSO) += vsyscall.o
obj-$(CONFIG_DEBUG_FS) += timekeeping_debug.o
obj-$(CONFIG_TEST_UDELAY) += test_udelay.o
diff --git a/kernel/time/tick-legacy.c b/kernel/time/tick-legacy.c
new file mode 100644
index 000000000000..73c5a0af4743
--- /dev/null
+++ b/kernel/time/tick-legacy.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Timer tick function for architectures that lack generic clockevents,
+ * consolidated here from m68k/ia64/parisc/arm.
+ */
+
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/timekeeper_internal.h>
+
+#include "tick-internal.h"
+
+void legacy_timer_tick(unsigned long ticks)
+{
+ if (ticks)
+ xtime_update(ticks);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
+}
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 04/15] timekeeping: add CONFIG_LEGACY_TIMER_TICK
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
All platforms that currently do not use generic clockevents roughly call
the same set of functions in their timer interrupts: xtime_update(),
update_process_times() and profile_tick(), sometimes in a different
sequence.
Add a helper function that performs all three of them, to make the
callers more uniform and simplify the interface.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
include/linux/timekeeping.h | 1 +
kernel/time/Kconfig | 7 +++++++
kernel/time/Makefile | 1 +
kernel/time/tick-legacy.c | 19 +++++++++++++++++++
4 files changed, 28 insertions(+)
create mode 100644 kernel/time/tick-legacy.c
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 7f7e4a3f4394..3670cb1670ff 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -12,6 +12,7 @@ extern int timekeeping_suspended;
/* Architecture timer tick functions: */
extern void update_process_times(int user);
extern void xtime_update(unsigned long ticks);
+extern void legacy_timer_tick(unsigned long ticks);
/*
* Get and set timeofday
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 51d298ccbe05..c6867f29d279 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -57,6 +57,13 @@ config POSIX_CPU_TIMERS_TASK_WORK
bool
default y if POSIX_TIMERS && HAVE_POSIX_CPU_TIMERS_TASK_WORK
+config LEGACY_TIMER_TICK
+ bool
+ help
+ The legacy timer tick helper is used by platforms that
+ lack support for the generic clockevent framework.
+ New platforms should use generic clockevents instead.
+
if GENERIC_CLOCKEVENTS
menu "Timers subsystem"
diff --git a/kernel/time/Makefile b/kernel/time/Makefile
index c8f00168afe8..1fb1c1ef6a19 100644
--- a/kernel/time/Makefile
+++ b/kernel/time/Makefile
@@ -16,6 +16,7 @@ ifeq ($(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST),y)
endif
obj-$(CONFIG_GENERIC_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_TICK_ONESHOT) += tick-oneshot.o tick-sched.o
+obj-$(CONFIG_LEGACY_TIMER_TICK) += tick-legacy.o
obj-$(CONFIG_HAVE_GENERIC_VDSO) += vsyscall.o
obj-$(CONFIG_DEBUG_FS) += timekeeping_debug.o
obj-$(CONFIG_TEST_UDELAY) += test_udelay.o
diff --git a/kernel/time/tick-legacy.c b/kernel/time/tick-legacy.c
new file mode 100644
index 000000000000..73c5a0af4743
--- /dev/null
+++ b/kernel/time/tick-legacy.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Timer tick function for architectures that lack generic clockevents,
+ * consolidated here from m68k/ia64/parisc/arm.
+ */
+
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/timekeeper_internal.h>
+
+#include "tick-internal.h"
+
+void legacy_timer_tick(unsigned long ticks)
+{
+ if (ticks)
+ xtime_update(ticks);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
+}
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 04/15] timekeeping: add CONFIG_LEGACY_TIMER_TICK
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
All platforms that currently do not use generic clockevents roughly call
the same set of functions in their timer interrupts: xtime_update(),
update_process_times() and profile_tick(), sometimes in a different
sequence.
Add a helper function that performs all three of them, to make the
callers more uniform and simplify the interface.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
include/linux/timekeeping.h | 1 +
kernel/time/Kconfig | 7 +++++++
kernel/time/Makefile | 1 +
kernel/time/tick-legacy.c | 19 +++++++++++++++++++
4 files changed, 28 insertions(+)
create mode 100644 kernel/time/tick-legacy.c
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 7f7e4a3f4394..3670cb1670ff 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -12,6 +12,7 @@ extern int timekeeping_suspended;
/* Architecture timer tick functions: */
extern void update_process_times(int user);
extern void xtime_update(unsigned long ticks);
+extern void legacy_timer_tick(unsigned long ticks);
/*
* Get and set timeofday
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 51d298ccbe05..c6867f29d279 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -57,6 +57,13 @@ config POSIX_CPU_TIMERS_TASK_WORK
bool
default y if POSIX_TIMERS && HAVE_POSIX_CPU_TIMERS_TASK_WORK
+config LEGACY_TIMER_TICK
+ bool
+ help
+ The legacy timer tick helper is used by platforms that
+ lack support for the generic clockevent framework.
+ New platforms should use generic clockevents instead.
+
if GENERIC_CLOCKEVENTS
menu "Timers subsystem"
diff --git a/kernel/time/Makefile b/kernel/time/Makefile
index c8f00168afe8..1fb1c1ef6a19 100644
--- a/kernel/time/Makefile
+++ b/kernel/time/Makefile
@@ -16,6 +16,7 @@ ifeq ($(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST),y)
endif
obj-$(CONFIG_GENERIC_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_TICK_ONESHOT) += tick-oneshot.o tick-sched.o
+obj-$(CONFIG_LEGACY_TIMER_TICK) += tick-legacy.o
obj-$(CONFIG_HAVE_GENERIC_VDSO) += vsyscall.o
obj-$(CONFIG_DEBUG_FS) += timekeeping_debug.o
obj-$(CONFIG_TEST_UDELAY) += test_udelay.o
diff --git a/kernel/time/tick-legacy.c b/kernel/time/tick-legacy.c
new file mode 100644
index 000000000000..73c5a0af4743
--- /dev/null
+++ b/kernel/time/tick-legacy.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Timer tick function for architectures that lack generic clockevents,
+ * consolidated here from m68k/ia64/parisc/arm.
+ */
+
+#include <linux/irq.h>
+#include <linux/profile.h>
+#include <linux/timekeeper_internal.h>
+
+#include "tick-internal.h"
+
+void legacy_timer_tick(unsigned long ticks)
+{
+ if (ticks)
+ xtime_update(ticks);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
+}
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 05/15] ia64: convert to legacy_timer_tick
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
ia64 is the only architecture that calls xtime_update() in a loop,
once for each jiffie that has passed since the last event.
Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
this any differently, but now it seems simpler to just pass the number
of jiffies that passed in the meantime.
While this loses the ability process interrupts in the middle of
the timer tick by calling local_irq_enable(), doing so is fairly
peculiar anyway and it seems better to just do what everyone
else does here.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/ia64/Kconfig | 1 +
arch/ia64/kernel/time.c | 36 +++++++++++++-----------------------
2 files changed, 14 insertions(+), 23 deletions(-)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 39b25a5a591b..db8c2a365b70 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -46,6 +46,7 @@ config IA64
select ARCH_THREAD_STACK_ALLOCATOR
select ARCH_CLOCKSOURCE_DATA
select GENERIC_TIME_VSYSCALL
+ select LEGACY_TIMER_TICK
select SWIOTLB
select SYSCTL_ARCH_UNALIGN_NO_WARN
select HAVE_MOD_ARCH_SPECIFIC
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 7abc5f37bfaf..9431edb08508 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -161,39 +161,29 @@ void vtime_account_idle(struct task_struct *tsk)
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
- unsigned long new_itm;
+ unsigned long cur_itm, new_itm, ticks;
if (cpu_is_offline(smp_processor_id())) {
return IRQ_HANDLED;
}
new_itm = local_cpu_data->itm_next;
+ cur_itm = ia64_get_itc();
- if (!time_after(ia64_get_itc(), new_itm))
+ if (!time_after(cur_itm, new_itm)) {
printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n",
- ia64_get_itc(), new_itm);
-
- profile_tick(CPU_PROFILING);
-
- while (1) {
- update_process_times(user_mode(get_irq_regs()));
-
- new_itm += local_cpu_data->itm_delta;
-
- if (smp_processor_id() == time_keeper_id)
- xtime_update(1);
-
- local_cpu_data->itm_next = new_itm;
+ cur_itm, new_itm);
+ ticks = 1;
+ } else {
+ ticks = DIV_ROUND_UP(cur_itm - new_itm,
+ local_cpu_data->itm_delta);
+ new_itm += ticks * local_cpu_data->itm_delta;
+ }
- if (time_after(new_itm, ia64_get_itc()))
- break;
+ if (smp_processor_id() != time_keeper_id)
+ ticks = 0;
- /*
- * Allow IPIs to interrupt the timer loop.
- */
- local_irq_enable();
- local_irq_disable();
- }
+ legacy_timer_tick(ticks);
do {
/*
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
ia64 is the only architecture that calls xtime_update() in a loop,
once for each jiffie that has passed since the last event.
Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
this any differently, but now it seems simpler to just pass the number
of jiffies that passed in the meantime.
While this loses the ability process interrupts in the middle of
the timer tick by calling local_irq_enable(), doing so is fairly
peculiar anyway and it seems better to just do what everyone
else does here.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/ia64/Kconfig | 1 +
arch/ia64/kernel/time.c | 36 +++++++++++++-----------------------
2 files changed, 14 insertions(+), 23 deletions(-)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 39b25a5a591b..db8c2a365b70 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -46,6 +46,7 @@ config IA64
select ARCH_THREAD_STACK_ALLOCATOR
select ARCH_CLOCKSOURCE_DATA
select GENERIC_TIME_VSYSCALL
+ select LEGACY_TIMER_TICK
select SWIOTLB
select SYSCTL_ARCH_UNALIGN_NO_WARN
select HAVE_MOD_ARCH_SPECIFIC
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 7abc5f37bfaf..9431edb08508 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -161,39 +161,29 @@ void vtime_account_idle(struct task_struct *tsk)
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
- unsigned long new_itm;
+ unsigned long cur_itm, new_itm, ticks;
if (cpu_is_offline(smp_processor_id())) {
return IRQ_HANDLED;
}
new_itm = local_cpu_data->itm_next;
+ cur_itm = ia64_get_itc();
- if (!time_after(ia64_get_itc(), new_itm))
+ if (!time_after(cur_itm, new_itm)) {
printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n",
- ia64_get_itc(), new_itm);
-
- profile_tick(CPU_PROFILING);
-
- while (1) {
- update_process_times(user_mode(get_irq_regs()));
-
- new_itm += local_cpu_data->itm_delta;
-
- if (smp_processor_id() = time_keeper_id)
- xtime_update(1);
-
- local_cpu_data->itm_next = new_itm;
+ cur_itm, new_itm);
+ ticks = 1;
+ } else {
+ ticks = DIV_ROUND_UP(cur_itm - new_itm,
+ local_cpu_data->itm_delta);
+ new_itm += ticks * local_cpu_data->itm_delta;
+ }
- if (time_after(new_itm, ia64_get_itc()))
- break;
+ if (smp_processor_id() != time_keeper_id)
+ ticks = 0;
- /*
- * Allow IPIs to interrupt the timer loop.
- */
- local_irq_enable();
- local_irq_disable();
- }
+ legacy_timer_tick(ticks);
do {
/*
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
ia64 is the only architecture that calls xtime_update() in a loop,
once for each jiffie that has passed since the last event.
Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
this any differently, but now it seems simpler to just pass the number
of jiffies that passed in the meantime.
While this loses the ability process interrupts in the middle of
the timer tick by calling local_irq_enable(), doing so is fairly
peculiar anyway and it seems better to just do what everyone
else does here.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/ia64/Kconfig | 1 +
arch/ia64/kernel/time.c | 36 +++++++++++++-----------------------
2 files changed, 14 insertions(+), 23 deletions(-)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 39b25a5a591b..db8c2a365b70 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -46,6 +46,7 @@ config IA64
select ARCH_THREAD_STACK_ALLOCATOR
select ARCH_CLOCKSOURCE_DATA
select GENERIC_TIME_VSYSCALL
+ select LEGACY_TIMER_TICK
select SWIOTLB
select SYSCTL_ARCH_UNALIGN_NO_WARN
select HAVE_MOD_ARCH_SPECIFIC
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 7abc5f37bfaf..9431edb08508 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -161,39 +161,29 @@ void vtime_account_idle(struct task_struct *tsk)
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
- unsigned long new_itm;
+ unsigned long cur_itm, new_itm, ticks;
if (cpu_is_offline(smp_processor_id())) {
return IRQ_HANDLED;
}
new_itm = local_cpu_data->itm_next;
+ cur_itm = ia64_get_itc();
- if (!time_after(ia64_get_itc(), new_itm))
+ if (!time_after(cur_itm, new_itm)) {
printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n",
- ia64_get_itc(), new_itm);
-
- profile_tick(CPU_PROFILING);
-
- while (1) {
- update_process_times(user_mode(get_irq_regs()));
-
- new_itm += local_cpu_data->itm_delta;
-
- if (smp_processor_id() == time_keeper_id)
- xtime_update(1);
-
- local_cpu_data->itm_next = new_itm;
+ cur_itm, new_itm);
+ ticks = 1;
+ } else {
+ ticks = DIV_ROUND_UP(cur_itm - new_itm,
+ local_cpu_data->itm_delta);
+ new_itm += ticks * local_cpu_data->itm_delta;
+ }
- if (time_after(new_itm, ia64_get_itc()))
- break;
+ if (smp_processor_id() != time_keeper_id)
+ ticks = 0;
- /*
- * Allow IPIs to interrupt the timer loop.
- */
- local_irq_enable();
- local_irq_disable();
- }
+ legacy_timer_tick(ticks);
do {
/*
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-12-18 21:29 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 21:29 UTC (permalink / raw)
To: Arnd Bergmann, linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
Hi Arnd!
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> ia64 is the only architecture that calls xtime_update() in a loop,
> once for each jiffie that has passed since the last event.
>
> Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> this any differently, but now it seems simpler to just pass the number
> of jiffies that passed in the meantime.
>
> While this loses the ability process interrupts in the middle of
> the timer tick by calling local_irq_enable(), doing so is fairly
> peculiar anyway and it seems better to just do what everyone
> else does here.
This broke the hpsa block device driver on my HP RX2600.
I'm seeing this backtrace now:
[ 905.883273] usb 1-2: SerialNumber: A60020000001
[ 905.918170] sda: sda1 sda2 sda3
[ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
[ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 905.944102] scsi host1: usb-storage 1-2:1.0
[ 905.944102] usbcore: registered new interface driver usb-storage
[ 905.944117] usbcore: registered new interface driver uas
[ 905.948117] scsi 1:0:0:0: CD-ROM TEAC DV-W28EAW H.0C PQ: 0 ANSI: 0
[ 905.952013] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 905.956102] sr 1:0:0:0: Power-on or device reset occurred
[ 905.968107] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 905.968107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 906.028013] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 906.028110] tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:09
[ 906.026167] usb 2-1: New USB device found, idVendor=03f0, idProduct=1126, bcdDevice= 0.01
[ 906.028110] tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.028110] tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.030214] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=63
[ 906.032240] tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.036102] GSI 30 (level, low) -> CPU 2 (0x0200) vector 67
[ 906.034186] usb 2-1: Product: Virtual Management Device
[ 906.038235] usb 2-1: Manufacturer: HP
[ 906.040017] usb 2-1: SerialNumber: 0017a499dd1c
[ 906.056108] hid: raw HID events driver (C) Jiri Kosina
[ 906.080013] usbcore: registered new interface driver usbhid
[ 906.080013] usbhid: USB HID core driver
[ 906.080107] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
[ 906.088110] hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
[ 906.088110] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
[ 906.092110] hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
[ 906.104104] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.108288] hpsa 0000:05:00.0: device is ready.
[ 906.108288] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.152107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.170926] hpsa 0000:05:00.0: device is ready.
[ 906.170926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.218925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.222925] hpsa 0000:05:00.0: device is ready.
[ 906.222925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.266926] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272016] hpsa 0000:05:00.0: device is ready.
[ 906.272016] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272107] scsi host2: ioc0: LSISAS1068 B0, FwRev=010f0000h, Ports=1, MaxQ=511, IRQ=62
[ 906.324110] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.330925] hpsa 0000:05:00.0: device is ready.
[ 906.330925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.378925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.382926] hpsa 0000:05:00.0: device is ready.
[ 906.382926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.386926] tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:08
[ 906.386926] tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.388016] tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.388016] tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.396108] tg3 0000:01:02.1 enp1s2f1: renamed from eth1
[ 906.408107] tg3 0000:01:02.0 enp1s2f0: renamed from eth0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36
[/sbin/fsck.ext4 (1) -- /dev/sda2] fsck.ext4 -a -C0 /dev/sda2
/dev/sda2: clean, 317994/2068416 files, 6480495/8257536 blocks
[ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.670923] hpsa 0000:05:00.0: device is ready.
[ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
done.
[ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
[ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
[ 906.722166] Task dump for CPU 2:
[ 906.722166] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.722166]
[ 906.722166] Call Trace:
[ 906.722166] [<0000000000000fd6>] 0xfd6
[ 906.722166] sp=e000010046d27c70 bsp=e000010046d20e80
[ 906.782168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.782168] rcu: 2-....: (18 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=18
[ 906.782168] (detected by 0, t=22157 jiffies, g=465, q=80)
[ 906.782168] Task dump for CPU 2:
[ 906.782168] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.782168]
[ 906.782168] Call Trace:
[ 906.782168] [<0000001d00000065>] 0x1d00000065
[ 906.782168] sp=e000010046d27c70 bsp=e000010046d20d48
[ 906.844107] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 906.978917] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 907.726923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.734923] hpsa 0000:05:00.0: device is ready.
[ 907.734923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.790923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.802923] hpsa 0000:05:00.0: device is ready.
[ 907.802923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.860014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.886923] hpsa 0000:05:00.0: device is ready.
[ 907.886923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.930923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.942923] hpsa 0000:05:00.0: device is ready.
[ 907.942923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.976107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.982923] hpsa 0000:05:00.0: device is ready.
[ 907.982923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.106923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.110923] hpsa 0000:05:00.0: device is ready.
[ 908.110923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.256014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.258922] hpsa 0000:05:00.0: device is ready.
[ 908.258922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.428014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.434923] hpsa 0000:05:00.0: device is ready.
[ 908.434923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.710922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.714922] hpsa 0000:05:00.0: device is ready.
[ 908.714922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.754922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.758922] hpsa 0000:05:00.0: device is ready.
[ 908.758922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.788106] systemd[1]: Inserted module 'autofs4'
[ 908.972107] systemd[1]: systemd 246.6-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 908.976013] systemd[1]: Detected architecture ia64.
Welcome to Debian GNU/Linux bullseye/sid!
[ 909.020014] systemd[1]: Set hostname to <glendronach>.
[ 909.178923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.182922] hpsa 0000:05:00.0: device is ready.
[ 909.182922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.242922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.254922] hpsa 0000:05:00.0: device is ready.
[ 909.254922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.322922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.334922] hpsa 0000:05:00.0: device is ready.
[ 909.334922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
[ 909.360108] Not tainted 5.10.0+ #130
[ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
[ 909.364108]
[ 909.364108] Call Trace:
[ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
[ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
[ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
[ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
[ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
[ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
[ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
[ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
[ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
[ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
[ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
[ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
[ 909.374168] Task dump for CPU 3:
[ 909.374168] task:khungtaskd state:R running task
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 21:29 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 21:29 UTC (permalink / raw)
To: Arnd Bergmann, linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
Hi Arnd!
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> ia64 is the only architecture that calls xtime_update() in a loop,
> once for each jiffie that has passed since the last event.
>
> Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> this any differently, but now it seems simpler to just pass the number
> of jiffies that passed in the meantime.
>
> While this loses the ability process interrupts in the middle of
> the timer tick by calling local_irq_enable(), doing so is fairly
> peculiar anyway and it seems better to just do what everyone
> else does here.
This broke the hpsa block device driver on my HP RX2600.
I'm seeing this backtrace now:
[ 905.883273] usb 1-2: SerialNumber: A60020000001
[ 905.918170] sda: sda1 sda2 sda3
[ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
[ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 905.944102] scsi host1: usb-storage 1-2:1.0
[ 905.944102] usbcore: registered new interface driver usb-storage
[ 905.944117] usbcore: registered new interface driver uas
[ 905.948117] scsi 1:0:0:0: CD-ROM TEAC DV-W28EAW H.0C PQ: 0 ANSI: 0
[ 905.952013] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 905.956102] sr 1:0:0:0: Power-on or device reset occurred
[ 905.968107] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 905.968107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 906.028013] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 906.028110] tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:09
[ 906.026167] usb 2-1: New USB device found, idVendor\x03f0, idProduct\x1126, bcdDevice= 0.01
[ 906.028110] tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.028110] tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.030214] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumberc
[ 906.032240] tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.036102] GSI 30 (level, low) -> CPU 2 (0x0200) vector 67
[ 906.034186] usb 2-1: Product: Virtual Management Device
[ 906.038235] usb 2-1: Manufacturer: HP
[ 906.040017] usb 2-1: SerialNumber: 0017a499dd1c
[ 906.056108] hid: raw HID events driver (C) Jiri Kosina
[ 906.080013] usbcore: registered new interface driver usbhid
[ 906.080013] usbhid: USB HID core driver
[ 906.080107] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
[ 906.088110] hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
[ 906.088110] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
[ 906.092110] hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
[ 906.104104] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.108288] hpsa 0000:05:00.0: device is ready.
[ 906.108288] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.152107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.170926] hpsa 0000:05:00.0: device is ready.
[ 906.170926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.218925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.222925] hpsa 0000:05:00.0: device is ready.
[ 906.222925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.266926] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272016] hpsa 0000:05:00.0: device is ready.
[ 906.272016] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272107] scsi host2: ioc0: LSISAS1068 B0, FwRev\x010f0000h, Ports=1, MaxQQ1, IRQb
[ 906.324110] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.330925] hpsa 0000:05:00.0: device is ready.
[ 906.330925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.378925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.382926] hpsa 0000:05:00.0: device is ready.
[ 906.382926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.386926] tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:08
[ 906.386926] tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.388016] tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.388016] tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.396108] tg3 0000:01:02.1 enp1s2f1: renamed from eth1
[ 906.408107] tg3 0000:01:02.0 enp1s2f0: renamed from eth0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36
[/sbin/fsck.ext4 (1) -- /dev/sda2] fsck.ext4 -a -C0 /dev/sda2
/dev/sda2: clean, 317994/2068416 files, 6480495/8257536 blocks
[ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.670923] hpsa 0000:05:00.0: device is ready.
[ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
done.
[ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.722166] rcu: 2-....: (3 ticks this GP) idleþ6/1/0x4000000000000000 softirqi3/698 fqs=4
[ 906.722166] (detected by 0, ta15 jiffies, gF5, q€)
[ 906.722166] Task dump for CPU 2:
[ 906.722166] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.722166]
[ 906.722166] Call Trace:
[ 906.722166] [<0000000000000fd6>] 0xfd6
[ 906.722166] spà00010046d27c70 bspà00010046d20e80
[ 906.782168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.782168] rcu: 2-....: (18 ticks this GP) idleþ6/1/0x4000000000000000 softirqi3/698 fqs\x18
[ 906.782168] (detected by 0, t"157 jiffies, gF5, q€)
[ 906.782168] Task dump for CPU 2:
[ 906.782168] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.782168]
[ 906.782168] Call Trace:
[ 906.782168] [<0000001d00000065>] 0x1d00000065
[ 906.782168] spà00010046d27c70 bspà00010046d20d48
[ 906.844107] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 906.978917] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 907.726923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.734923] hpsa 0000:05:00.0: device is ready.
[ 907.734923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.790923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.802923] hpsa 0000:05:00.0: device is ready.
[ 907.802923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.860014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.886923] hpsa 0000:05:00.0: device is ready.
[ 907.886923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.930923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.942923] hpsa 0000:05:00.0: device is ready.
[ 907.942923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.976107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.982923] hpsa 0000:05:00.0: device is ready.
[ 907.982923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.106923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.110923] hpsa 0000:05:00.0: device is ready.
[ 908.110923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.256014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.258922] hpsa 0000:05:00.0: device is ready.
[ 908.258922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.428014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.434923] hpsa 0000:05:00.0: device is ready.
[ 908.434923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.710922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.714922] hpsa 0000:05:00.0: device is ready.
[ 908.714922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.754922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.758922] hpsa 0000:05:00.0: device is ready.
[ 908.758922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.788106] systemd[1]: Inserted module 'autofs4'
[ 908.972107] systemd[1]: systemd 246.6-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 908.976013] systemd[1]: Detected architecture ia64.
Welcome to Debian GNU/Linux bullseye/sid!
[ 909.020014] systemd[1]: Set hostname to <glendronach>.
[ 909.178923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.182922] hpsa 0000:05:00.0: device is ready.
[ 909.182922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.242922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.254922] hpsa 0000:05:00.0: device is ready.
[ 909.254922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.322922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.334922] hpsa 0000:05:00.0: device is ready.
[ 909.334922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
[ 909.360108] Not tainted 5.10.0+ #130
[ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
[ 909.364108]
[ 909.364108] Call Trace:
[ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
[ 909.364423] spà000100487d7b70 bspà000100487d1748
[ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
[ 909.368423] spà000100487d7b90 bspà000100487d16e0
[ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
[ 909.368558] spà000100487d7b90 bspà000100487d16c0
[ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
[ 909.372290] spà000100487d7b90 bspà000100487d1698
[ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
[ 909.376290] spà000100487d7b90 bspà000100487d1648
[ 909.374168] rcu: 3-....: (2 ticks this GP) idle\x19e/1/0x4000000000000002 softirq\x1581/1581 fqs=2
[ 909.374168] (detected by 0, tV61 jiffies, g\x1089, q=3)
[ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
[ 909.376290] spà000100487d7b90 bspà000100487d1610
[ 909.374168] Task dump for CPU 3:
[ 909.374168] task:khungtaskd state:R running task
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 21:29 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 21:29 UTC (permalink / raw)
To: Arnd Bergmann, linux-kernel
Cc: linux-ia64, Linus Walleij, James E.J. Bottomley, Greg Ungerer,
Helge Deller, Daniel Lezcano, Anatoly Pugachev, Russell King,
Finn Thain, Mike Rapoport, Sam Creasey, Fenghua Yu,
Arnd Bergmann, linux-m68k, John Stultz, Thomas Gleixner,
Linux ARM, Tony Luck, Parisc List, Stephen Boyd, Philip Blundell,
Joshua Thompson
Hi Arnd!
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> ia64 is the only architecture that calls xtime_update() in a loop,
> once for each jiffie that has passed since the last event.
>
> Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> this any differently, but now it seems simpler to just pass the number
> of jiffies that passed in the meantime.
>
> While this loses the ability process interrupts in the middle of
> the timer tick by calling local_irq_enable(), doing so is fairly
> peculiar anyway and it seems better to just do what everyone
> else does here.
This broke the hpsa block device driver on my HP RX2600.
I'm seeing this backtrace now:
[ 905.883273] usb 1-2: SerialNumber: A60020000001
[ 905.918170] sda: sda1 sda2 sda3
[ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
[ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 905.944102] scsi host1: usb-storage 1-2:1.0
[ 905.944102] usbcore: registered new interface driver usb-storage
[ 905.944117] usbcore: registered new interface driver uas
[ 905.948117] scsi 1:0:0:0: CD-ROM TEAC DV-W28EAW H.0C PQ: 0 ANSI: 0
[ 905.952013] usb 2-1: new full-speed USB device number 2 using ohci-pci
[ 905.956102] sr 1:0:0:0: Power-on or device reset occurred
[ 905.968107] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 905.968107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 906.028013] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 906.028110] tg3 0000:01:02.0 eth0: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:09
[ 906.026167] usb 2-1: New USB device found, idVendor=03f0, idProduct=1126, bcdDevice= 0.01
[ 906.028110] tg3 0000:01:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.028110] tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.030214] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=63
[ 906.032240] tg3 0000:01:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.036102] GSI 30 (level, low) -> CPU 2 (0x0200) vector 67
[ 906.034186] usb 2-1: Product: Virtual Management Device
[ 906.038235] usb 2-1: Manufacturer: HP
[ 906.040017] usb 2-1: SerialNumber: 0017a499dd1c
[ 906.056108] hid: raw HID events driver (C) Jiri Kosina
[ 906.080013] usbcore: registered new interface driver usbhid
[ 906.080013] usbhid: USB HID core driver
[ 906.080107] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:03F0:1126.0001/input/input2
[ 906.088110] hid-generic 0003:03F0:1126.0001: input,hidraw0: USB HID v1.11 Keyboard [HP Virtual Management Device] on usb-0000:00:02.0-1/input0
[ 906.088110] input: HP Virtual Management Device as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:03F0:1126.0002/input/input3
[ 906.092110] hid-generic 0003:03F0:1126.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Management Device] on usb-0000:00:02.0-1/input1
[ 906.104104] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.108288] hpsa 0000:05:00.0: device is ready.
[ 906.108288] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.152107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.170926] hpsa 0000:05:00.0: device is ready.
[ 906.170926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.218925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.222925] hpsa 0000:05:00.0: device is ready.
[ 906.222925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.266926] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272016] hpsa 0000:05:00.0: device is ready.
[ 906.272016] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.272107] scsi host2: ioc0: LSISAS1068 B0, FwRev=010f0000h, Ports=1, MaxQ=511, IRQ=62
[ 906.324110] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.330925] hpsa 0000:05:00.0: device is ready.
[ 906.330925] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.378925] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.382926] hpsa 0000:05:00.0: device is ready.
[ 906.382926] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.386926] tg3 0000:01:02.1 eth1: Tigon3 [partno(BCM95700A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:17:a4:99:2d:08
[ 906.386926] tg3 0000:01:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 906.388016] tg3 0000:01:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 906.388016] tg3 0000:01:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 906.396108] tg3 0000:01:02.1 enp1s2f1: renamed from eth1
[ 906.408107] tg3 0000:01:02.0 enp1s2f0: renamed from eth0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36
[/sbin/fsck.ext4 (1) -- /dev/sda2] fsck.ext4 -a -C0 /dev/sda2
/dev/sda2: clean, 317994/2068416 files, 6480495/8257536 blocks
[ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 906.670923] hpsa 0000:05:00.0: device is ready.
[ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
done.
[ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
[ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
[ 906.722166] Task dump for CPU 2:
[ 906.722166] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.722166]
[ 906.722166] Call Trace:
[ 906.722166] [<0000000000000fd6>] 0xfd6
[ 906.722166] sp=e000010046d27c70 bsp=e000010046d20e80
[ 906.782168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 906.782168] rcu: 2-....: (18 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=18
[ 906.782168] (detected by 0, t=22157 jiffies, g=465, q=80)
[ 906.782168] Task dump for CPU 2:
[ 906.782168] task:modprobe state:R running task stack: 0 pid: 162 ppid: 146 flags:0x00000002
[ 906.782168]
[ 906.782168] Call Trace:
[ 906.782168] [<0000001d00000065>] 0x1d00000065
[ 906.782168] sp=e000010046d27c70 bsp=e000010046d20d48
[ 906.844107] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 906.978917] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 907.726923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.734923] hpsa 0000:05:00.0: device is ready.
[ 907.734923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.790923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.802923] hpsa 0000:05:00.0: device is ready.
[ 907.802923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.860014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.886923] hpsa 0000:05:00.0: device is ready.
[ 907.886923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.930923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.942923] hpsa 0000:05:00.0: device is ready.
[ 907.942923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.976107] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 907.982923] hpsa 0000:05:00.0: device is ready.
[ 907.982923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.106923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.110923] hpsa 0000:05:00.0: device is ready.
[ 908.110923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.256014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.258922] hpsa 0000:05:00.0: device is ready.
[ 908.258922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.428014] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.434923] hpsa 0000:05:00.0: device is ready.
[ 908.434923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.710922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.714922] hpsa 0000:05:00.0: device is ready.
[ 908.714922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.754922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.758922] hpsa 0000:05:00.0: device is ready.
[ 908.758922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 908.788106] systemd[1]: Inserted module 'autofs4'
[ 908.972107] systemd[1]: systemd 246.6-5 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD -SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 908.976013] systemd[1]: Detected architecture ia64.
Welcome to Debian GNU/Linux bullseye/sid!
[ 909.020014] systemd[1]: Set hostname to <glendronach>.
[ 909.178923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.182922] hpsa 0000:05:00.0: device is ready.
[ 909.182922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.242922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.254922] hpsa 0000:05:00.0: device is ready.
[ 909.254922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.322922] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.334922] hpsa 0000:05:00.0: device is ready.
[ 909.334922] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
[ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
[ 909.360108] Not tainted 5.10.0+ #130
[ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
[ 909.364108]
[ 909.364108] Call Trace:
[ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
[ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
[ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
[ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
[ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
[ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
[ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
[ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
[ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
[ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
[ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
[ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
[ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
[ 909.374168] Task dump for CPU 3:
[ 909.374168] task:khungtaskd state:R running task
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
2020-12-18 21:29 ` John Paul Adrian Glaubitz
(?)
@ 2020-12-18 22:07 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-12-18 22:07 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
[-- Attachment #1: Type: text/plain, Size: 5354 bytes --]
On Fri, Dec 18, 2020 at 10:29 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
>
> Hi Arnd!
>
> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> > ia64 is the only architecture that calls xtime_update() in a loop,
> > once for each jiffie that has passed since the last event.
> >
> > Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> > jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> > this any differently, but now it seems simpler to just pass the number
> > of jiffies that passed in the meantime.
> >
> > While this loses the ability process interrupts in the middle of
> > the timer tick by calling local_irq_enable(), doing so is fairly
> > peculiar anyway and it seems better to just do what everyone
> > else does here.
>
> This broke the hpsa block device driver on my HP RX2600.
Hi Adrian,
Sorry for causing this bug, and thank you for bisecting it
down to my patch.
Do you see any other strange behavior with that patch, or is
this the only symptom you are aware of?
>
> I'm seeing this backtrace now:
>
> [ 905.883273] usb 1-2: SerialNumber: A60020000001
> [ 905.918170] sda: sda1 sda2 sda3
> [ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
> [ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
> [ 905.944102] scsi host1: usb-storage 1-2:1.0
> [ 905.944102] usbcore: registered new interface driver usb-storage
> [ 905.944117] usbcore: registered new interface driver uas
The timestamps show that time is moving forward, which is at least
something. Do you have a feeling for whether the timestamps are
counting in (roughly) the correct speed, or is it going much faster
or slower than it should?
To clarify: the [905.944117] numbers are seconds/microseconds
since boot, so message would be 906 seconds after the kernel
started.
> Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Ok, so it gets into user space. Is this initramfs or the actual read-only root?
> [ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
> [ 906.670923] hpsa 0000:05:00.0: device is ready.
> [ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
> done.
> [ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
> [ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
This appears to be an 'rcu stall' warning, from print_cpu_stall_info(),
indicating that timer ticks are missing.
> [ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
> [ 909.360108] Not tainted 5.10.0+ #130
> [ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
> [ 909.364108]
> [ 909.364108] Call Trace:
> [ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
> [ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
> [ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
> [ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
> [ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
> [ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
> [ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
> [ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
> [ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
> [ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
> [ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
> [ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
> [ 909.374168] Task dump for CPU 3:
> [ 909.374168] task:khungtaskd state:R running task
and this seems to be another instance of the same. I would assume that this
is completely unrelated to the block driver and just happened to trigger during
the same time the driver was doing something.
Can you see in your full logs if the "Oops: timer tick before it's due" warning
triggered at any point?
I've attached a patch for a partial revert of my original change, this
should still work with the final cleanup on top, but restore the loop
plus the local_irq_enable()/local_irq_disable() that I dropped from
the original code. Does this make a difference?
Arnd
[-- Attachment #2: ia64-timer-partial-revert.diff --]
[-- Type: text/x-patch, Size: 1319 bytes --]
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 9431edb08508..e3d9c8088d56 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -161,29 +161,34 @@ void vtime_account_idle(struct task_struct *tsk)
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
- unsigned long cur_itm, new_itm, ticks;
+ unsigned long new_itm;
if (cpu_is_offline(smp_processor_id())) {
return IRQ_HANDLED;
}
new_itm = local_cpu_data->itm_next;
- cur_itm = ia64_get_itc();
- if (!time_after(cur_itm, new_itm)) {
+ if (!time_after(ia64_get_itc(), new_itm))
printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n",
- cur_itm, new_itm);
- ticks = 1;
- } else {
- ticks = DIV_ROUND_UP(cur_itm - new_itm,
- local_cpu_data->itm_delta);
- new_itm += ticks * local_cpu_data->itm_delta;
- }
+ ia64_get_itc(), new_itm);
+
+ while (1) {
+ new_itm += local_cpu_data->itm_delta;
+
+ legacy_timer_tick(smp_processor_id() == time_keeper_id);
- if (smp_processor_id() != time_keeper_id)
- ticks = 0;
+ local_cpu_data->itm_next = new_itm;
- legacy_timer_tick(ticks);
+ if (time_after(new_itm, ia64_get_itc()))
+ break;
+
+ /*
+ * Allow IPIs to interrupt the timer loop.
+ */
+ local_irq_enable();
+ local_irq_disable();
+ }
do {
/*
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 22:07 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-12-18 22:07 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
[-- Attachment #1: Type: text/plain, Size: 5354 bytes --]
On Fri, Dec 18, 2020 at 10:29 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
>
> Hi Arnd!
>
> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> > ia64 is the only architecture that calls xtime_update() in a loop,
> > once for each jiffie that has passed since the last event.
> >
> > Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> > jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> > this any differently, but now it seems simpler to just pass the number
> > of jiffies that passed in the meantime.
> >
> > While this loses the ability process interrupts in the middle of
> > the timer tick by calling local_irq_enable(), doing so is fairly
> > peculiar anyway and it seems better to just do what everyone
> > else does here.
>
> This broke the hpsa block device driver on my HP RX2600.
Hi Adrian,
Sorry for causing this bug, and thank you for bisecting it
down to my patch.
Do you see any other strange behavior with that patch, or is
this the only symptom you are aware of?
>
> I'm seeing this backtrace now:
>
> [ 905.883273] usb 1-2: SerialNumber: A60020000001
> [ 905.918170] sda: sda1 sda2 sda3
> [ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
> [ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
> [ 905.944102] scsi host1: usb-storage 1-2:1.0
> [ 905.944102] usbcore: registered new interface driver usb-storage
> [ 905.944117] usbcore: registered new interface driver uas
The timestamps show that time is moving forward, which is at least
something. Do you have a feeling for whether the timestamps are
counting in (roughly) the correct speed, or is it going much faster
or slower than it should?
To clarify: the [905.944117] numbers are seconds/microseconds
since boot, so message would be 906 seconds after the kernel
started.
> Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Ok, so it gets into user space. Is this initramfs or the actual read-only root?
> [ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
> [ 906.670923] hpsa 0000:05:00.0: device is ready.
> [ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
> done.
> [ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
> [ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
This appears to be an 'rcu stall' warning, from print_cpu_stall_info(),
indicating that timer ticks are missing.
> [ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
> [ 909.360108] Not tainted 5.10.0+ #130
> [ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
> [ 909.364108]
> [ 909.364108] Call Trace:
> [ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
> [ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
> [ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
> [ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
> [ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
> [ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
> [ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
> [ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
> [ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
> [ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
> [ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
> [ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
> [ 909.374168] Task dump for CPU 3:
> [ 909.374168] task:khungtaskd state:R running task
and this seems to be another instance of the same. I would assume that this
is completely unrelated to the block driver and just happened to trigger during
the same time the driver was doing something.
Can you see in your full logs if the "Oops: timer tick before it's due" warning
triggered at any point?
I've attached a patch for a partial revert of my original change, this
should still work with the final cleanup on top, but restore the loop
plus the local_irq_enable()/local_irq_disable() that I dropped from
the original code. Does this make a difference?
Arnd
[-- Attachment #2: ia64-timer-partial-revert.diff --]
[-- Type: text/x-patch, Size: 1319 bytes --]
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 9431edb08508..e3d9c8088d56 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -161,29 +161,34 @@ void vtime_account_idle(struct task_struct *tsk)
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
- unsigned long cur_itm, new_itm, ticks;
+ unsigned long new_itm;
if (cpu_is_offline(smp_processor_id())) {
return IRQ_HANDLED;
}
new_itm = local_cpu_data->itm_next;
- cur_itm = ia64_get_itc();
- if (!time_after(cur_itm, new_itm)) {
+ if (!time_after(ia64_get_itc(), new_itm))
printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n",
- cur_itm, new_itm);
- ticks = 1;
- } else {
- ticks = DIV_ROUND_UP(cur_itm - new_itm,
- local_cpu_data->itm_delta);
- new_itm += ticks * local_cpu_data->itm_delta;
- }
+ ia64_get_itc(), new_itm);
+
+ while (1) {
+ new_itm += local_cpu_data->itm_delta;
+
+ legacy_timer_tick(smp_processor_id() == time_keeper_id);
- if (smp_processor_id() != time_keeper_id)
- ticks = 0;
+ local_cpu_data->itm_next = new_itm;
- legacy_timer_tick(ticks);
+ if (time_after(new_itm, ia64_get_itc()))
+ break;
+
+ /*
+ * Allow IPIs to interrupt the timer loop.
+ */
+ local_irq_enable();
+ local_irq_disable();
+ }
do {
/*
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 22:07 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-12-18 22:07 UTC (permalink / raw)
To: John Paul Adrian Glaubitz
Cc: linux-ia64, Linus Walleij, James E.J. Bottomley, Greg Ungerer,
Helge Deller, Daniel Lezcano, Anatoly Pugachev, Russell King,
Finn Thain, Mike Rapoport, Sam Creasey, Fenghua Yu,
Arnd Bergmann, linux-m68k, John Stultz, Thomas Gleixner,
Linux ARM, Tony Luck, Parisc List, Stephen Boyd, linux-kernel,
Philip Blundell, Joshua Thompson
[-- Attachment #1: Type: text/plain, Size: 5354 bytes --]
On Fri, Dec 18, 2020 at 10:29 PM John Paul Adrian Glaubitz
<glaubitz@physik.fu-berlin.de> wrote:
>
> Hi Arnd!
>
> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> > ia64 is the only architecture that calls xtime_update() in a loop,
> > once for each jiffie that has passed since the last event.
> >
> > Before commit 3171a0305d62 ("[PATCH] simplify update_times (avoid
> > jiffies/jiffies_64 aliasing problem)") in 2006, it could not actually do
> > this any differently, but now it seems simpler to just pass the number
> > of jiffies that passed in the meantime.
> >
> > While this loses the ability process interrupts in the middle of
> > the timer tick by calling local_irq_enable(), doing so is fairly
> > peculiar anyway and it seems better to just do what everyone
> > else does here.
>
> This broke the hpsa block device driver on my HP RX2600.
Hi Adrian,
Sorry for causing this bug, and thank you for bisecting it
down to my patch.
Do you see any other strange behavior with that patch, or is
this the only symptom you are aware of?
>
> I'm seeing this backtrace now:
>
> [ 905.883273] usb 1-2: SerialNumber: A60020000001
> [ 905.918170] sda: sda1 sda2 sda3
> [ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
> [ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
> [ 905.944102] scsi host1: usb-storage 1-2:1.0
> [ 905.944102] usbcore: registered new interface driver usb-storage
> [ 905.944117] usbcore: registered new interface driver uas
The timestamps show that time is moving forward, which is at least
something. Do you have a feeling for whether the timestamps are
counting in (roughly) the correct speed, or is it going much faster
or slower than it should?
To clarify: the [905.944117] numbers are seconds/microseconds
since boot, so message would be 906 seconds after the kernel
started.
> Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Ok, so it gets into user space. Is this initramfs or the actual read-only root?
> [ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
> [ 906.670923] hpsa 0000:05:00.0: device is ready.
> [ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
> done.
> [ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
> [ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
This appears to be an 'rcu stall' warning, from print_cpu_stall_info(),
indicating that timer ticks are missing.
> [ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
> [ 909.360108] Not tainted 5.10.0+ #130
> [ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
> [ 909.364108]
> [ 909.364108] Call Trace:
> [ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
> [ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
> [ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
> [ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
> [ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
> [ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
> [ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
> [ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
> [ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
> [ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
> [ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
> [ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
> [ 909.374168] Task dump for CPU 3:
> [ 909.374168] task:khungtaskd state:R running task
and this seems to be another instance of the same. I would assume that this
is completely unrelated to the block driver and just happened to trigger during
the same time the driver was doing something.
Can you see in your full logs if the "Oops: timer tick before it's due" warning
triggered at any point?
I've attached a patch for a partial revert of my original change, this
should still work with the final cleanup on top, but restore the loop
plus the local_irq_enable()/local_irq_disable() that I dropped from
the original code. Does this make a difference?
Arnd
[-- Attachment #2: ia64-timer-partial-revert.diff --]
[-- Type: text/x-patch, Size: 1319 bytes --]
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 9431edb08508..e3d9c8088d56 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -161,29 +161,34 @@ void vtime_account_idle(struct task_struct *tsk)
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
- unsigned long cur_itm, new_itm, ticks;
+ unsigned long new_itm;
if (cpu_is_offline(smp_processor_id())) {
return IRQ_HANDLED;
}
new_itm = local_cpu_data->itm_next;
- cur_itm = ia64_get_itc();
- if (!time_after(cur_itm, new_itm)) {
+ if (!time_after(ia64_get_itc(), new_itm))
printk(KERN_ERR "Oops: timer tick before it's due (itc=%lx,itm=%lx)\n",
- cur_itm, new_itm);
- ticks = 1;
- } else {
- ticks = DIV_ROUND_UP(cur_itm - new_itm,
- local_cpu_data->itm_delta);
- new_itm += ticks * local_cpu_data->itm_delta;
- }
+ ia64_get_itc(), new_itm);
+
+ while (1) {
+ new_itm += local_cpu_data->itm_delta;
+
+ legacy_timer_tick(smp_processor_id() == time_keeper_id);
- if (smp_processor_id() != time_keeper_id)
- ticks = 0;
+ local_cpu_data->itm_next = new_itm;
- legacy_timer_tick(ticks);
+ if (time_after(new_itm, ia64_get_itc()))
+ break;
+
+ /*
+ * Allow IPIs to interrupt the timer loop.
+ */
+ local_irq_enable();
+ local_irq_disable();
+ }
do {
/*
[-- Attachment #3: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
2020-12-18 22:07 ` Arnd Bergmann
(?)
@ 2020-12-18 22:13 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 22:13 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
Hi Arnd!
On 12/18/20 11:07 PM, Arnd Bergmann wrote:
> Sorry for causing this bug, and thank you for bisecting it
> down to my patch.
>
> Do you see any other strange behavior with that patch, or is
> this the only symptom you are aware of?
This seems to be the only issue I'm seeing so far. However, as I'm not
able to fully boot the system, I'm not able to be certain that there
might be other fallouts once the system is running.
>> I'm seeing this backtrace now:
>>
>> [ 905.883273] usb 1-2: SerialNumber: A60020000001
>> [ 905.918170] sda: sda1 sda2 sda3
>> [ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
>> [ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
>> [ 905.944102] scsi host1: usb-storage 1-2:1.0
>> [ 905.944102] usbcore: registered new interface driver usb-storage
>> [ 905.944117] usbcore: registered new interface driver uas
>
> The timestamps show that time is moving forward, which is at least
> something. Do you have a feeling for whether the timestamps are
> counting in (roughly) the correct speed, or is it going much faster
> or slower than it should?
>
> To clarify: the [905.944117] numbers are seconds/microseconds
> since boot, so message would be 906 seconds after the kernel
> started.
No, that would be definitely off. I hadn't had the machine up and running
for 15 minutes. This issue showed right after boot.
>> Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
>
> Ok, so it gets into user space. Is this initramfs or the actual read-only root?
This is using an initramfs.
>> [ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
>> [ 906.670923] hpsa 0000:05:00.0: device is ready.
>> [ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
>> done.
>> [ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
>> [ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
>> [ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
> This appears to be an 'rcu stall' warning, from print_cpu_stall_info(),
> indicating that timer ticks are missing.
OK.
>> [ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
>> [ 909.360108] Not tainted 5.10.0+ #130
>> [ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> [ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
>> [ 909.364108]
>> [ 909.364108] Call Trace:
>> [ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
>> [ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
>> [ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
>> [ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
>> [ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
>> [ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
>> [ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
>> [ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
>> [ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
>> [ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
>> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
>> [ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
>> [ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
>> [ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
>> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
>> [ 909.374168] Task dump for CPU 3:
>> [ 909.374168] task:khungtaskd state:R running task
>
> and this seems to be another instance of the same. I would assume that this
> is completely unrelated to the block driver and just happened to trigger during
> the same time the driver was doing something.
>
> Can you see in your full logs if the "Oops: timer tick before it's due" warning
> triggered at any point?
It's difficult, to be honest. The problem is that the above message spams the whole
kernel buffer to the point that the buffer of the built-in serial console is filled
up. So I'm not sure if I've seen this message.
> I've attached a patch for a partial revert of my original change, this
> should still work with the final cleanup on top, but restore the loop
> plus the local_irq_enable()/local_irq_disable() that I dropped from
> the original code. Does this make a difference?
I'll give it a try and report back.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 22:13 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 22:13 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
Hi Arnd!
On 12/18/20 11:07 PM, Arnd Bergmann wrote:
> Sorry for causing this bug, and thank you for bisecting it
> down to my patch.
>
> Do you see any other strange behavior with that patch, or is
> this the only symptom you are aware of?
This seems to be the only issue I'm seeing so far. However, as I'm not
able to fully boot the system, I'm not able to be certain that there
might be other fallouts once the system is running.
>> I'm seeing this backtrace now:
>>
>> [ 905.883273] usb 1-2: SerialNumber: A60020000001
>> [ 905.918170] sda: sda1 sda2 sda3
>> [ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
>> [ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
>> [ 905.944102] scsi host1: usb-storage 1-2:1.0
>> [ 905.944102] usbcore: registered new interface driver usb-storage
>> [ 905.944117] usbcore: registered new interface driver uas
>
> The timestamps show that time is moving forward, which is at least
> something. Do you have a feeling for whether the timestamps are
> counting in (roughly) the correct speed, or is it going much faster
> or slower than it should?
>
> To clarify: the [905.944117] numbers are seconds/microseconds
> since boot, so message would be 906 seconds after the kernel
> started.
No, that would be definitely off. I hadn't had the machine up and running
for 15 minutes. This issue showed right after boot.
>> Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
>
> Ok, so it gets into user space. Is this initramfs or the actual read-only root?
This is using an initramfs.
>> [ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
>> [ 906.670923] hpsa 0000:05:00.0: device is ready.
>> [ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
>> done.
>> [ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
>> [ 906.722166] rcu: 2-....: (3 ticks this GP) idleþ6/1/0x4000000000000000 softirqi3/698 fqs=4
>> [ 906.722166] (detected by 0, ta15 jiffies, gF5, q€)
> This appears to be an 'rcu stall' warning, from print_cpu_stall_info(),
> indicating that timer ticks are missing.
OK.
>> [ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
>> [ 909.360108] Not tainted 5.10.0+ #130
>> [ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> [ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
>> [ 909.364108]
>> [ 909.364108] Call Trace:
>> [ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
>> [ 909.364423] spà000100487d7b70 bspà000100487d1748
>> [ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
>> [ 909.368423] spà000100487d7b90 bspà000100487d16e0
>> [ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
>> [ 909.368558] spà000100487d7b90 bspà000100487d16c0
>> [ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
>> [ 909.372290] spà000100487d7b90 bspà000100487d1698
>> [ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
>> [ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
>> [ 909.376290] spà000100487d7b90 bspà000100487d1648
>> [ 909.374168] rcu: 3-....: (2 ticks this GP) idle\x19e/1/0x4000000000000002 softirq\x1581/1581 fqs=2
>> [ 909.374168] (detected by 0, tV61 jiffies, g\x1089, q=3)
>> [ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
>> [ 909.376290] spà000100487d7b90 bspà000100487d1610
>> [ 909.374168] Task dump for CPU 3:
>> [ 909.374168] task:khungtaskd state:R running task
>
> and this seems to be another instance of the same. I would assume that this
> is completely unrelated to the block driver and just happened to trigger during
> the same time the driver was doing something.
>
> Can you see in your full logs if the "Oops: timer tick before it's due" warning
> triggered at any point?
It's difficult, to be honest. The problem is that the above message spams the whole
kernel buffer to the point that the buffer of the built-in serial console is filled
up. So I'm not sure if I've seen this message.
> I've attached a patch for a partial revert of my original change, this
> should still work with the final cleanup on top, but restore the loop
> plus the local_irq_enable()/local_irq_disable() that I dropped from
> the original code. Does this make a difference?
I'll give it a try and report back.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 22:13 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 22:13 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-ia64, Linus Walleij, James E.J. Bottomley, Greg Ungerer,
Helge Deller, Daniel Lezcano, Anatoly Pugachev, Russell King,
Finn Thain, Mike Rapoport, Sam Creasey, Fenghua Yu,
Arnd Bergmann, linux-m68k, John Stultz, Thomas Gleixner,
Linux ARM, Tony Luck, Parisc List, Stephen Boyd, linux-kernel,
Philip Blundell, Joshua Thompson
Hi Arnd!
On 12/18/20 11:07 PM, Arnd Bergmann wrote:
> Sorry for causing this bug, and thank you for bisecting it
> down to my patch.
>
> Do you see any other strange behavior with that patch, or is
> this the only symptom you are aware of?
This seems to be the only issue I'm seeing so far. However, as I'm not
able to fully boot the system, I'm not able to be certain that there
might be other fallouts once the system is running.
>> I'm seeing this backtrace now:
>>
>> [ 905.883273] usb 1-2: SerialNumber: A60020000001
>> [ 905.918170] sda: sda1 sda2 sda3
>> [ 905.920107] sd 0:1:0:0: [sda] Attached SCSI disk
>> [ 905.944102] usb-storage 1-2:1.0: USB Mass Storage device detected
>> [ 905.944102] scsi host1: usb-storage 1-2:1.0
>> [ 905.944102] usbcore: registered new interface driver usb-storage
>> [ 905.944117] usbcore: registered new interface driver uas
>
> The timestamps show that time is moving forward, which is at least
> something. Do you have a feeling for whether the timestamps are
> counting in (roughly) the correct speed, or is it going much faster
> or slower than it should?
>
> To clarify: the [905.944117] numbers are seconds/microseconds
> since boot, so message would be 906 seconds after the kernel
> started.
No, that would be definitely off. I hadn't had the machine up and running
for 15 minutes. This issue showed right after boot.
>> Begin: Loading essential drivers ... done. > Begin: Running /scripts/init-premount ... done. > Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
>
> Ok, so it gets into user space. Is this initramfs or the actual read-only root?
This is using an initramfs.
>> [ 906.666923] hpsa 0000:05:00.0: scsi 0:1:0:0: resetting logical Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
>> [ 906.670923] hpsa 0000:05:00.0: device is ready.
>> [ 906.670923] hpsa 0000:05:00.0: scsi 0:1:0:0: reset logical completed successfully Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
>> done.
>> [ 906.722166] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
>> [ 906.722166] rcu: 2-....: (3 ticks this GP) idle=fe6/1/0x4000000000000000 softirq=693/698 fqs=4
>> [ 906.722166] (detected by 0, t=6115 jiffies, g=465, q=80)
> This appears to be an 'rcu stall' warning, from print_cpu_stall_info(),
> indicating that timer ticks are missing.
OK.
>> [ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds.
>> [ 909.360108] Not tainted 5.10.0+ #130
>> [ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> [ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000
>> [ 909.364108]
>> [ 909.364108] Call Trace:
>> [ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0
>> [ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748
>> [ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240
>> [ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0
>> [ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0
>> [ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0
>> [ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0
>> [ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698
>> [ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
>> [ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0
>> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648
>> [ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2
>> [ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3)
>> [ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140
>> [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610
>> [ 909.374168] Task dump for CPU 3:
>> [ 909.374168] task:khungtaskd state:R running task
>
> and this seems to be another instance of the same. I would assume that this
> is completely unrelated to the block driver and just happened to trigger during
> the same time the driver was doing something.
>
> Can you see in your full logs if the "Oops: timer tick before it's due" warning
> triggered at any point?
It's difficult, to be honest. The problem is that the above message spams the whole
kernel buffer to the point that the buffer of the built-in serial console is filled
up. So I'm not sure if I've seen this message.
> I've attached a patch for a partial revert of my original change, this
> should still work with the final cleanup on top, but restore the loop
> plus the local_irq_enable()/local_irq_disable() that I dropped from
> the original code. Does this make a difference?
I'll give it a try and report back.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
2020-12-18 22:13 ` John Paul Adrian Glaubitz
(?)
@ 2020-12-18 22:32 ` John Paul Adrian Glaubitz
-1 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 22:32 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
Hi Arnd!
On 12/18/20 11:13 PM, John Paul Adrian Glaubitz wrote:
>> I've attached a patch for a partial revert of my original change, this
>> should still work with the final cleanup on top, but restore the loop
>> plus the local_irq_enable()/local_irq_disable() that I dropped from
>> the original code. Does this make a difference?
>
> I'll give it a try and report back.
Yes. That solves the timer issues. Now there is unfortunately still a
second, unrelated regression with the hpsa driver that was introduced
by one of the ia64 patches in the mm tree from Andrew which makes the
hpsa driver not load at all.
Haven't figured out yet what the problem is.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 22:32 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 22:32 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM, Mike Rapoport,
Anatoly Pugachev
Hi Arnd!
On 12/18/20 11:13 PM, John Paul Adrian Glaubitz wrote:
>> I've attached a patch for a partial revert of my original change, this
>> should still work with the final cleanup on top, but restore the loop
>> plus the local_irq_enable()/local_irq_disable() that I dropped from
>> the original code. Does this make a difference?
>
> I'll give it a try and report back.
Yes. That solves the timer issues. Now there is unfortunately still a
second, unrelated regression with the hpsa driver that was introduced
by one of the ia64 patches in the mm tree from Andrew which makes the
hpsa driver not load at all.
Haven't figured out yet what the problem is.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 05/15] ia64: convert to legacy_timer_tick
@ 2020-12-18 22:32 ` John Paul Adrian Glaubitz
0 siblings, 0 replies; 79+ messages in thread
From: John Paul Adrian Glaubitz @ 2020-12-18 22:32 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-ia64, Linus Walleij, James E.J. Bottomley, Greg Ungerer,
Helge Deller, Daniel Lezcano, Anatoly Pugachev, Russell King,
Finn Thain, Mike Rapoport, Sam Creasey, Fenghua Yu,
Arnd Bergmann, linux-m68k, John Stultz, Thomas Gleixner,
Linux ARM, Tony Luck, Parisc List, Stephen Boyd, linux-kernel,
Philip Blundell, Joshua Thompson
Hi Arnd!
On 12/18/20 11:13 PM, John Paul Adrian Glaubitz wrote:
>> I've attached a patch for a partial revert of my original change, this
>> should still work with the final cleanup on top, but restore the loop
>> plus the local_irq_enable()/local_irq_disable() that I dropped from
>> the original code. Does this make a difference?
>
> I'll give it a try and report back.
Yes. That solves the timer issues. Now there is unfortunately still a
second, unrelated regression with the hpsa driver that was introduced
by one of the ia64 patches in the mm tree from Andrew which makes the
hpsa driver not load at all.
Haven't figured out yet what the problem is.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@debian.org
`. `' Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH v2 06/15] ARM: rpc: use legacy_timer_tick
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
rpc is the only user of the timer_tick() function now, and can
just call the newly added generic version instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 1 +
arch/arm/include/asm/mach/time.h | 2 --
arch/arm/kernel/time.c | 14 --------------
arch/arm/mach-rpc/time.c | 2 +-
4 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1b9fda08b92f..dbadfa186f72 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -452,6 +452,7 @@ config ARCH_RPC
select HAVE_IDE
select HAVE_PATA_PLATFORM
select ISA_DMA_API
+ select LEGACY_TIMER_TICK
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT_MAP
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index d75d39280db7..5f522916ec99 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -7,8 +7,6 @@
#ifndef __ASM_ARM_MACH_TIME_H
#define __ASM_ARM_MACH_TIME_H
-extern void timer_tick(void);
-
typedef void (*clock_access_fn)(struct timespec64 *);
extern int register_persistent_clock(clock_access_fn read_persistent);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09b149b09c43..b3836c94dc74 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -60,20 +60,6 @@ unsigned long profile_pc(struct pt_regs *regs)
EXPORT_SYMBOL(profile_pc);
#endif
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-/*
- * Kernel system timer support.
- */
-void timer_tick(void)
-{
- profile_tick(CPU_PROFILING);
- xtime_update(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-#endif
-
static void dummy_clock_access(struct timespec64 *ts)
{
ts->tv_sec = 0;
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index da85cac761ba..9f8edcfe9357 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -81,7 +81,7 @@ static irqreturn_t
ioc_timer_interrupt(int irq, void *dev_id)
{
ioc_time += RPC_LATCH;
- timer_tick();
+ legacy_timer_tick(1);
return IRQ_HANDLED;
}
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 06/15] ARM: rpc: use legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
rpc is the only user of the timer_tick() function now, and can
just call the newly added generic version instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 1 +
arch/arm/include/asm/mach/time.h | 2 --
arch/arm/kernel/time.c | 14 --------------
arch/arm/mach-rpc/time.c | 2 +-
4 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1b9fda08b92f..dbadfa186f72 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -452,6 +452,7 @@ config ARCH_RPC
select HAVE_IDE
select HAVE_PATA_PLATFORM
select ISA_DMA_API
+ select LEGACY_TIMER_TICK
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT_MAP
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index d75d39280db7..5f522916ec99 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -7,8 +7,6 @@
#ifndef __ASM_ARM_MACH_TIME_H
#define __ASM_ARM_MACH_TIME_H
-extern void timer_tick(void);
-
typedef void (*clock_access_fn)(struct timespec64 *);
extern int register_persistent_clock(clock_access_fn read_persistent);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09b149b09c43..b3836c94dc74 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -60,20 +60,6 @@ unsigned long profile_pc(struct pt_regs *regs)
EXPORT_SYMBOL(profile_pc);
#endif
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-/*
- * Kernel system timer support.
- */
-void timer_tick(void)
-{
- profile_tick(CPU_PROFILING);
- xtime_update(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-#endif
-
static void dummy_clock_access(struct timespec64 *ts)
{
ts->tv_sec = 0;
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index da85cac761ba..9f8edcfe9357 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -81,7 +81,7 @@ static irqreturn_t
ioc_timer_interrupt(int irq, void *dev_id)
{
ioc_time += RPC_LATCH;
- timer_tick();
+ legacy_timer_tick(1);
return IRQ_HANDLED;
}
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 06/15] ARM: rpc: use legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
rpc is the only user of the timer_tick() function now, and can
just call the newly added generic version instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 1 +
arch/arm/include/asm/mach/time.h | 2 --
arch/arm/kernel/time.c | 14 --------------
arch/arm/mach-rpc/time.c | 2 +-
4 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1b9fda08b92f..dbadfa186f72 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -452,6 +452,7 @@ config ARCH_RPC
select HAVE_IDE
select HAVE_PATA_PLATFORM
select ISA_DMA_API
+ select LEGACY_TIMER_TICK
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT_MAP
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index d75d39280db7..5f522916ec99 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -7,8 +7,6 @@
#ifndef __ASM_ARM_MACH_TIME_H
#define __ASM_ARM_MACH_TIME_H
-extern void timer_tick(void);
-
typedef void (*clock_access_fn)(struct timespec64 *);
extern int register_persistent_clock(clock_access_fn read_persistent);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09b149b09c43..b3836c94dc74 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -60,20 +60,6 @@ unsigned long profile_pc(struct pt_regs *regs)
EXPORT_SYMBOL(profile_pc);
#endif
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-/*
- * Kernel system timer support.
- */
-void timer_tick(void)
-{
- profile_tick(CPU_PROFILING);
- xtime_update(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-#endif
-
static void dummy_clock_access(struct timespec64 *ts)
{
ts->tv_sec = 0;
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index da85cac761ba..9f8edcfe9357 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -81,7 +81,7 @@ static irqreturn_t
ioc_timer_interrupt(int irq, void *dev_id)
{
ioc_time += RPC_LATCH;
- timer_tick();
+ legacy_timer_tick(1);
return IRQ_HANDLED;
}
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 07/15] parisc: use legacy_timer_tick
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
("parisc: Switch to generic sched_clock implementation"), but does not
appear to actually be using it, and instead calls the low-level
timekeeping functions directly.
Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
the newly added legacy_timer_tick() helper.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
Documentation/features/time/clockevents/arch-support.txt | 2 +-
arch/parisc/Kconfig | 2 +-
arch/parisc/kernel/time.c | 9 +++------
3 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index 8287b6aa522e..61a5c9d68c15 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -21,7 +21,7 @@
| nds32: | ok |
| nios2: | ok |
| openrisc: | ok |
- | parisc: | ok |
+ | parisc: | TODO |
| powerpc: | ok |
| riscv: | ok |
| s390: | ok |
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b234e8154cbd..78b17621ee4a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -52,7 +52,7 @@ config PARISC
select HAVE_REGS_AND_STACK_ACCESS_API
select GENERIC_SCHED_CLOCK
select HAVE_UNSTABLE_SCHED_CLOCK if SMP
- select GENERIC_CLOCKEVENTS
+ select LEGACY_TIMER_TICK
select CPU_NO_EFFICIENT_FFS
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 13d94f0f94a0..08e4d480abe1 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -70,8 +70,6 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
/* gcc can optimize for "read-only" case with a local clocktick */
unsigned long cpt = clocktick;
- profile_tick(CPU_PROFILING);
-
/* Initialize next_tick to the old expected tick time. */
next_tick = cpuinfo->it_value;
@@ -86,10 +84,9 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
cpuinfo->it_value = next_tick;
/* Go do system house keeping. */
- if (cpu == 0)
- xtime_update(ticks_elapsed);
-
- update_process_times(user_mode(get_irq_regs()));
+ if (cpu != 0)
+ ticks_elapsed = 0;
+ legacy_timer_tick(ticks_elapsed);
/* Skip clockticks on purpose if we know we would miss those.
* The new CR16 must be "later" than current CR16 otherwise
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
("parisc: Switch to generic sched_clock implementation"), but does not
appear to actually be using it, and instead calls the low-level
timekeeping functions directly.
Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
the newly added legacy_timer_tick() helper.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
Documentation/features/time/clockevents/arch-support.txt | 2 +-
arch/parisc/Kconfig | 2 +-
arch/parisc/kernel/time.c | 9 +++------
3 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index 8287b6aa522e..61a5c9d68c15 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -21,7 +21,7 @@
| nds32: | ok |
| nios2: | ok |
| openrisc: | ok |
- | parisc: | ok |
+ | parisc: | TODO |
| powerpc: | ok |
| riscv: | ok |
| s390: | ok |
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b234e8154cbd..78b17621ee4a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -52,7 +52,7 @@ config PARISC
select HAVE_REGS_AND_STACK_ACCESS_API
select GENERIC_SCHED_CLOCK
select HAVE_UNSTABLE_SCHED_CLOCK if SMP
- select GENERIC_CLOCKEVENTS
+ select LEGACY_TIMER_TICK
select CPU_NO_EFFICIENT_FFS
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 13d94f0f94a0..08e4d480abe1 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -70,8 +70,6 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
/* gcc can optimize for "read-only" case with a local clocktick */
unsigned long cpt = clocktick;
- profile_tick(CPU_PROFILING);
-
/* Initialize next_tick to the old expected tick time. */
next_tick = cpuinfo->it_value;
@@ -86,10 +84,9 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
cpuinfo->it_value = next_tick;
/* Go do system house keeping. */
- if (cpu = 0)
- xtime_update(ticks_elapsed);
-
- update_process_times(user_mode(get_irq_regs()));
+ if (cpu != 0)
+ ticks_elapsed = 0;
+ legacy_timer_tick(ticks_elapsed);
/* Skip clockticks on purpose if we know we would miss those.
* The new CR16 must be "later" than current CR16 otherwise
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
("parisc: Switch to generic sched_clock implementation"), but does not
appear to actually be using it, and instead calls the low-level
timekeeping functions directly.
Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
the newly added legacy_timer_tick() helper.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
Documentation/features/time/clockevents/arch-support.txt | 2 +-
arch/parisc/Kconfig | 2 +-
arch/parisc/kernel/time.c | 9 +++------
3 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index 8287b6aa522e..61a5c9d68c15 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -21,7 +21,7 @@
| nds32: | ok |
| nios2: | ok |
| openrisc: | ok |
- | parisc: | ok |
+ | parisc: | TODO |
| powerpc: | ok |
| riscv: | ok |
| s390: | ok |
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index b234e8154cbd..78b17621ee4a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -52,7 +52,7 @@ config PARISC
select HAVE_REGS_AND_STACK_ACCESS_API
select GENERIC_SCHED_CLOCK
select HAVE_UNSTABLE_SCHED_CLOCK if SMP
- select GENERIC_CLOCKEVENTS
+ select LEGACY_TIMER_TICK
select CPU_NO_EFFICIENT_FFS
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 13d94f0f94a0..08e4d480abe1 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -70,8 +70,6 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
/* gcc can optimize for "read-only" case with a local clocktick */
unsigned long cpt = clocktick;
- profile_tick(CPU_PROFILING);
-
/* Initialize next_tick to the old expected tick time. */
next_tick = cpuinfo->it_value;
@@ -86,10 +84,9 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
cpuinfo->it_value = next_tick;
/* Go do system house keeping. */
- if (cpu == 0)
- xtime_update(ticks_elapsed);
-
- update_process_times(user_mode(get_irq_regs()));
+ if (cpu != 0)
+ ticks_elapsed = 0;
+ legacy_timer_tick(ticks_elapsed);
/* Skip clockticks on purpose if we know we would miss those.
* The new CR16 must be "later" than current CR16 otherwise
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 17:13 ` Helge Deller
-1 siblings, 0 replies; 79+ messages in thread
From: Helge Deller @ 2020-10-30 17:13 UTC (permalink / raw)
To: Arnd Bergmann, linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> ("parisc: Switch to generic sched_clock implementation"), but does not
> appear to actually be using it, and instead calls the low-level
> timekeeping functions directly.
Arnd, thank you for this patch!
It reminded me that I really missed to fully implement the clockevents on parisc!
Your other patch ("RFC: m68k: mac: convert to generic clockevent")
was a big help too, as it showed how it might work on parisc as well.
Here is now a current version of the clockevents-enabling-patch for parisc:
https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> the newly added legacy_timer_tick() helper.
My patch still needs more testing, but if it turns to work
out right, would you mind to drop your patch for parisc?
Helge
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> Documentation/features/time/clockevents/arch-support.txt | 2 +-
> arch/parisc/Kconfig | 2 +-
> arch/parisc/kernel/time.c | 9 +++------
> 3 files changed, 5 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
> index 8287b6aa522e..61a5c9d68c15 100644
> --- a/Documentation/features/time/clockevents/arch-support.txt
> +++ b/Documentation/features/time/clockevents/arch-support.txt
> @@ -21,7 +21,7 @@
> | nds32: | ok |
> | nios2: | ok |
> | openrisc: | ok |
> - | parisc: | ok |
> + | parisc: | TODO |
> | powerpc: | ok |
> | riscv: | ok |
> | s390: | ok |
> diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
> index b234e8154cbd..78b17621ee4a 100644
> --- a/arch/parisc/Kconfig
> +++ b/arch/parisc/Kconfig
> @@ -52,7 +52,7 @@ config PARISC
> select HAVE_REGS_AND_STACK_ACCESS_API
> select GENERIC_SCHED_CLOCK
> select HAVE_UNSTABLE_SCHED_CLOCK if SMP
> - select GENERIC_CLOCKEVENTS
> + select LEGACY_TIMER_TICK
> select CPU_NO_EFFICIENT_FFS
> select NEED_DMA_MAP_STATE
> select NEED_SG_DMA_LENGTH
> diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
> index 13d94f0f94a0..08e4d480abe1 100644
> --- a/arch/parisc/kernel/time.c
> +++ b/arch/parisc/kernel/time.c
> @@ -70,8 +70,6 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
> /* gcc can optimize for "read-only" case with a local clocktick */
> unsigned long cpt = clocktick;
>
> - profile_tick(CPU_PROFILING);
> -
> /* Initialize next_tick to the old expected tick time. */
> next_tick = cpuinfo->it_value;
>
> @@ -86,10 +84,9 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
> cpuinfo->it_value = next_tick;
>
> /* Go do system house keeping. */
> - if (cpu == 0)
> - xtime_update(ticks_elapsed);
> -
> - update_process_times(user_mode(get_irq_regs()));
> + if (cpu != 0)
> + ticks_elapsed = 0;
> + legacy_timer_tick(ticks_elapsed);
>
> /* Skip clockticks on purpose if we know we would miss those.
> * The new CR16 must be "later" than current CR16 otherwise
>
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 17:13 ` Helge Deller
0 siblings, 0 replies; 79+ messages in thread
From: Helge Deller @ 2020-10-30 17:13 UTC (permalink / raw)
To: Arnd Bergmann, linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> ("parisc: Switch to generic sched_clock implementation"), but does not
> appear to actually be using it, and instead calls the low-level
> timekeeping functions directly.
Arnd, thank you for this patch!
It reminded me that I really missed to fully implement the clockevents on parisc!
Your other patch ("RFC: m68k: mac: convert to generic clockevent")
was a big help too, as it showed how it might work on parisc as well.
Here is now a current version of the clockevents-enabling-patch for parisc:
https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> the newly added legacy_timer_tick() helper.
My patch still needs more testing, but if it turns to work
out right, would you mind to drop your patch for parisc?
Helge
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> Documentation/features/time/clockevents/arch-support.txt | 2 +-
> arch/parisc/Kconfig | 2 +-
> arch/parisc/kernel/time.c | 9 +++------
> 3 files changed, 5 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
> index 8287b6aa522e..61a5c9d68c15 100644
> --- a/Documentation/features/time/clockevents/arch-support.txt
> +++ b/Documentation/features/time/clockevents/arch-support.txt
> @@ -21,7 +21,7 @@
> | nds32: | ok |
> | nios2: | ok |
> | openrisc: | ok |
> - | parisc: | ok |
> + | parisc: | TODO |
> | powerpc: | ok |
> | riscv: | ok |
> | s390: | ok |
> diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
> index b234e8154cbd..78b17621ee4a 100644
> --- a/arch/parisc/Kconfig
> +++ b/arch/parisc/Kconfig
> @@ -52,7 +52,7 @@ config PARISC
> select HAVE_REGS_AND_STACK_ACCESS_API
> select GENERIC_SCHED_CLOCK
> select HAVE_UNSTABLE_SCHED_CLOCK if SMP
> - select GENERIC_CLOCKEVENTS
> + select LEGACY_TIMER_TICK
> select CPU_NO_EFFICIENT_FFS
> select NEED_DMA_MAP_STATE
> select NEED_SG_DMA_LENGTH
> diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
> index 13d94f0f94a0..08e4d480abe1 100644
> --- a/arch/parisc/kernel/time.c
> +++ b/arch/parisc/kernel/time.c
> @@ -70,8 +70,6 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
> /* gcc can optimize for "read-only" case with a local clocktick */
> unsigned long cpt = clocktick;
>
> - profile_tick(CPU_PROFILING);
> -
> /* Initialize next_tick to the old expected tick time. */
> next_tick = cpuinfo->it_value;
>
> @@ -86,10 +84,9 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
> cpuinfo->it_value = next_tick;
>
> /* Go do system house keeping. */
> - if (cpu == 0)
> - xtime_update(ticks_elapsed);
> -
> - update_process_times(user_mode(get_irq_regs()));
> + if (cpu != 0)
> + ticks_elapsed = 0;
> + legacy_timer_tick(ticks_elapsed);
>
> /* Skip clockticks on purpose if we know we would miss those.
> * The new CR16 must be "later" than current CR16 otherwise
>
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 17:13 ` Helge Deller
0 siblings, 0 replies; 79+ messages in thread
From: Helge Deller @ 2020-10-30 17:13 UTC (permalink / raw)
To: Arnd Bergmann, linux-kernel
Cc: Sam Creasey, Fenghua Yu, Tony Luck, linux-ia64, Parisc List,
Arnd Bergmann, Stephen Boyd, Philip Blundell, Linus Walleij,
Daniel Lezcano, Russell King, Finn Thain, James E.J. Bottomley,
linux-m68k, John Stultz, Linux ARM, Thomas Gleixner,
Greg Ungerer, Joshua Thompson
On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> ("parisc: Switch to generic sched_clock implementation"), but does not
> appear to actually be using it, and instead calls the low-level
> timekeeping functions directly.
Arnd, thank you for this patch!
It reminded me that I really missed to fully implement the clockevents on parisc!
Your other patch ("RFC: m68k: mac: convert to generic clockevent")
was a big help too, as it showed how it might work on parisc as well.
Here is now a current version of the clockevents-enabling-patch for parisc:
https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> the newly added legacy_timer_tick() helper.
My patch still needs more testing, but if it turns to work
out right, would you mind to drop your patch for parisc?
Helge
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> Documentation/features/time/clockevents/arch-support.txt | 2 +-
> arch/parisc/Kconfig | 2 +-
> arch/parisc/kernel/time.c | 9 +++------
> 3 files changed, 5 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
> index 8287b6aa522e..61a5c9d68c15 100644
> --- a/Documentation/features/time/clockevents/arch-support.txt
> +++ b/Documentation/features/time/clockevents/arch-support.txt
> @@ -21,7 +21,7 @@
> | nds32: | ok |
> | nios2: | ok |
> | openrisc: | ok |
> - | parisc: | ok |
> + | parisc: | TODO |
> | powerpc: | ok |
> | riscv: | ok |
> | s390: | ok |
> diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
> index b234e8154cbd..78b17621ee4a 100644
> --- a/arch/parisc/Kconfig
> +++ b/arch/parisc/Kconfig
> @@ -52,7 +52,7 @@ config PARISC
> select HAVE_REGS_AND_STACK_ACCESS_API
> select GENERIC_SCHED_CLOCK
> select HAVE_UNSTABLE_SCHED_CLOCK if SMP
> - select GENERIC_CLOCKEVENTS
> + select LEGACY_TIMER_TICK
> select CPU_NO_EFFICIENT_FFS
> select NEED_DMA_MAP_STATE
> select NEED_SG_DMA_LENGTH
> diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
> index 13d94f0f94a0..08e4d480abe1 100644
> --- a/arch/parisc/kernel/time.c
> +++ b/arch/parisc/kernel/time.c
> @@ -70,8 +70,6 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
> /* gcc can optimize for "read-only" case with a local clocktick */
> unsigned long cpt = clocktick;
>
> - profile_tick(CPU_PROFILING);
> -
> /* Initialize next_tick to the old expected tick time. */
> next_tick = cpuinfo->it_value;
>
> @@ -86,10 +84,9 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
> cpuinfo->it_value = next_tick;
>
> /* Go do system house keeping. */
> - if (cpu == 0)
> - xtime_update(ticks_elapsed);
> -
> - update_process_times(user_mode(get_irq_regs()));
> + if (cpu != 0)
> + ticks_elapsed = 0;
> + legacy_timer_tick(ticks_elapsed);
>
> /* Skip clockticks on purpose if we know we would miss those.
> * The new CR16 must be "later" than current CR16 otherwise
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
2020-10-30 17:13 ` Helge Deller
(?)
@ 2020-10-30 19:33 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 19:33 UTC (permalink / raw)
To: Helge Deller
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
>
> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> > From: Arnd Bergmann <arnd@arndb.de>
> >
> > parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> > ("parisc: Switch to generic sched_clock implementation"), but does not
> > appear to actually be using it, and instead calls the low-level
> > timekeeping functions directly.
>
> Arnd, thank you for this patch!
> It reminded me that I really missed to fully implement the clockevents on parisc!
>
> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
> was a big help too, as it showed how it might work on parisc as well.
>
> Here is now a current version of the clockevents-enabling-patch for parisc:
> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
Ah, nice!
> > Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> > the newly added legacy_timer_tick() helper.
>
> My patch still needs more testing, but if it turns to work
> out right, would you mind to drop your patch for parisc?
I think it would be easier if you could base your patch on top of
my series, as they would otherwise inevitably conflict. I could either
add it to my tree, or you could merge my branch into your tree.
Arnd
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 19:33 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 19:33 UTC (permalink / raw)
To: Helge Deller
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
>
> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> > From: Arnd Bergmann <arnd@arndb.de>
> >
> > parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> > ("parisc: Switch to generic sched_clock implementation"), but does not
> > appear to actually be using it, and instead calls the low-level
> > timekeeping functions directly.
>
> Arnd, thank you for this patch!
> It reminded me that I really missed to fully implement the clockevents on parisc!
>
> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
> was a big help too, as it showed how it might work on parisc as well.
>
> Here is now a current version of the clockevents-enabling-patch for parisc:
> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id;7ab4a74a2d1972dbeb33285d85f1500b2ff96a
Ah, nice!
> > Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> > the newly added legacy_timer_tick() helper.
>
> My patch still needs more testing, but if it turns to work
> out right, would you mind to drop your patch for parisc?
I think it would be easier if you could base your patch on top of
my series, as they would otherwise inevitably conflict. I could either
add it to my tree, or you could merge my branch into your tree.
Arnd
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 19:33 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 19:33 UTC (permalink / raw)
To: Helge Deller
Cc: Sam Creasey, Fenghua Yu, Tony Luck, linux-ia64, Parisc List,
Arnd Bergmann, Stephen Boyd, Philip Blundell, Linus Walleij,
Daniel Lezcano, linux-kernel, Finn Thain, Russell King,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
>
> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> > From: Arnd Bergmann <arnd@arndb.de>
> >
> > parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> > ("parisc: Switch to generic sched_clock implementation"), but does not
> > appear to actually be using it, and instead calls the low-level
> > timekeeping functions directly.
>
> Arnd, thank you for this patch!
> It reminded me that I really missed to fully implement the clockevents on parisc!
>
> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
> was a big help too, as it showed how it might work on parisc as well.
>
> Here is now a current version of the clockevents-enabling-patch for parisc:
> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
Ah, nice!
> > Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> > the newly added legacy_timer_tick() helper.
>
> My patch still needs more testing, but if it turns to work
> out right, would you mind to drop your patch for parisc?
I think it would be easier if you could base your patch on top of
my series, as they would otherwise inevitably conflict. I could either
add it to my tree, or you could merge my branch into your tree.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
2020-10-30 19:33 ` Arnd Bergmann
(?)
@ 2020-10-30 19:48 ` Helge Deller
-1 siblings, 0 replies; 79+ messages in thread
From: Helge Deller @ 2020-10-30 19:48 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On 10/30/20 8:33 PM, Arnd Bergmann wrote:
> On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
>>
>> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
>>> From: Arnd Bergmann <arnd@arndb.de>
>>>
>>> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
>>> ("parisc: Switch to generic sched_clock implementation"), but does not
>>> appear to actually be using it, and instead calls the low-level
>>> timekeeping functions directly.
>>
>> Arnd, thank you for this patch!
>> It reminded me that I really missed to fully implement the clockevents on parisc!
>>
>> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
>> was a big help too, as it showed how it might work on parisc as well.
>>
>> Here is now a current version of the clockevents-enabling-patch for parisc:
>> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
>
> Ah, nice!
>
>>> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
>>> the newly added legacy_timer_tick() helper.
>>
>> My patch still needs more testing, but if it turns to work
>> out right, would you mind to drop your patch for parisc?
>
> I think it would be easier if you could base your patch on top of
> my series, as they would otherwise inevitably conflict. I could either
> add it to my tree, or you could merge my branch into your tree.
Couldn't you drop your patch and include mine in your tree instead?
That way nothing conflicts, and they get merged together?
Helge
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 19:48 ` Helge Deller
0 siblings, 0 replies; 79+ messages in thread
From: Helge Deller @ 2020-10-30 19:48 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On 10/30/20 8:33 PM, Arnd Bergmann wrote:
> On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
>>
>> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
>>> From: Arnd Bergmann <arnd@arndb.de>
>>>
>>> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
>>> ("parisc: Switch to generic sched_clock implementation"), but does not
>>> appear to actually be using it, and instead calls the low-level
>>> timekeeping functions directly.
>>
>> Arnd, thank you for this patch!
>> It reminded me that I really missed to fully implement the clockevents on parisc!
>>
>> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
>> was a big help too, as it showed how it might work on parisc as well.
>>
>> Here is now a current version of the clockevents-enabling-patch for parisc:
>> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
>
> Ah, nice!
>
>>> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
>>> the newly added legacy_timer_tick() helper.
>>
>> My patch still needs more testing, but if it turns to work
>> out right, would you mind to drop your patch for parisc?
>
> I think it would be easier if you could base your patch on top of
> my series, as they would otherwise inevitably conflict. I could either
> add it to my tree, or you could merge my branch into your tree.
Couldn't you drop your patch and include mine in your tree instead?
That way nothing conflicts, and they get merged together?
Helge
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 19:48 ` Helge Deller
0 siblings, 0 replies; 79+ messages in thread
From: Helge Deller @ 2020-10-30 19:48 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Sam Creasey, Fenghua Yu, Tony Luck, linux-ia64, Parisc List,
Arnd Bergmann, Stephen Boyd, Philip Blundell, Linus Walleij,
Daniel Lezcano, linux-kernel, Finn Thain, Russell King,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
On 10/30/20 8:33 PM, Arnd Bergmann wrote:
> On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
>>
>> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
>>> From: Arnd Bergmann <arnd@arndb.de>
>>>
>>> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
>>> ("parisc: Switch to generic sched_clock implementation"), but does not
>>> appear to actually be using it, and instead calls the low-level
>>> timekeeping functions directly.
>>
>> Arnd, thank you for this patch!
>> It reminded me that I really missed to fully implement the clockevents on parisc!
>>
>> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
>> was a big help too, as it showed how it might work on parisc as well.
>>
>> Here is now a current version of the clockevents-enabling-patch for parisc:
>> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
>
> Ah, nice!
>
>>> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
>>> the newly added legacy_timer_tick() helper.
>>
>> My patch still needs more testing, but if it turns to work
>> out right, would you mind to drop your patch for parisc?
>
> I think it would be easier if you could base your patch on top of
> my series, as they would otherwise inevitably conflict. I could either
> add it to my tree, or you could merge my branch into your tree.
Couldn't you drop your patch and include mine in your tree instead?
That way nothing conflicts, and they get merged together?
Helge
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
2020-10-30 19:48 ` Helge Deller
(?)
@ 2020-10-30 20:37 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 20:37 UTC (permalink / raw)
To: Helge Deller
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Fri, Oct 30, 2020 at 8:48 PM Helge Deller <deller@gmx.de> wrote:
> On 10/30/20 8:33 PM, Arnd Bergmann wrote:
> > On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
> >>
> >> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> >>> From: Arnd Bergmann <arnd@arndb.de>
> >>>
> >>> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> >>> ("parisc: Switch to generic sched_clock implementation"), but does not
> >>> appear to actually be using it, and instead calls the low-level
> >>> timekeeping functions directly.
> >>
> >> Arnd, thank you for this patch!
> >> It reminded me that I really missed to fully implement the clockevents on parisc!
> >>
> >> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
> >> was a big help too, as it showed how it might work on parisc as well.
> >>
> >> Here is now a current version of the clockevents-enabling-patch for parisc:
> >> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
> >
> > Ah, nice!
> >
> >>> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> >>> the newly added legacy_timer_tick() helper.
> >>
> >> My patch still needs more testing, but if it turns to work
> >> out right, would you mind to drop your patch for parisc?
> >
> > I think it would be easier if you could base your patch on top of
> > my series, as they would otherwise inevitably conflict. I could either
> > add it to my tree, or you could merge my branch into your tree.
>
> Couldn't you drop your patch and include mine in your tree instead?
> That way nothing conflicts, and they get merged together?
That only works if nobody merges this branch into another one,
otherwise we end up with multiple copies of the later commits.
Arnd
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 20:37 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 20:37 UTC (permalink / raw)
To: Helge Deller
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Fri, Oct 30, 2020 at 8:48 PM Helge Deller <deller@gmx.de> wrote:
> On 10/30/20 8:33 PM, Arnd Bergmann wrote:
> > On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
> >>
> >> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> >>> From: Arnd Bergmann <arnd@arndb.de>
> >>>
> >>> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> >>> ("parisc: Switch to generic sched_clock implementation"), but does not
> >>> appear to actually be using it, and instead calls the low-level
> >>> timekeeping functions directly.
> >>
> >> Arnd, thank you for this patch!
> >> It reminded me that I really missed to fully implement the clockevents on parisc!
> >>
> >> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
> >> was a big help too, as it showed how it might work on parisc as well.
> >>
> >> Here is now a current version of the clockevents-enabling-patch for parisc:
> >> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id;7ab4a74a2d1972dbeb33285d85f1500b2ff96a
> >
> > Ah, nice!
> >
> >>> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> >>> the newly added legacy_timer_tick() helper.
> >>
> >> My patch still needs more testing, but if it turns to work
> >> out right, would you mind to drop your patch for parisc?
> >
> > I think it would be easier if you could base your patch on top of
> > my series, as they would otherwise inevitably conflict. I could either
> > add it to my tree, or you could merge my branch into your tree.
>
> Couldn't you drop your patch and include mine in your tree instead?
> That way nothing conflicts, and they get merged together?
That only works if nobody merges this branch into another one,
otherwise we end up with multiple copies of the later commits.
Arnd
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 07/15] parisc: use legacy_timer_tick
@ 2020-10-30 20:37 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 20:37 UTC (permalink / raw)
To: Helge Deller
Cc: Sam Creasey, Fenghua Yu, Tony Luck, linux-ia64, Parisc List,
Arnd Bergmann, Stephen Boyd, Philip Blundell, Linus Walleij,
Daniel Lezcano, linux-kernel, Finn Thain, Russell King,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
On Fri, Oct 30, 2020 at 8:48 PM Helge Deller <deller@gmx.de> wrote:
> On 10/30/20 8:33 PM, Arnd Bergmann wrote:
> > On Fri, Oct 30, 2020 at 6:13 PM Helge Deller <deller@gmx.de> wrote:
> >>
> >> On 10/30/20 4:17 PM, Arnd Bergmann wrote:
> >>> From: Arnd Bergmann <arnd@arndb.de>
> >>>
> >>> parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
> >>> ("parisc: Switch to generic sched_clock implementation"), but does not
> >>> appear to actually be using it, and instead calls the low-level
> >>> timekeeping functions directly.
> >>
> >> Arnd, thank you for this patch!
> >> It reminded me that I really missed to fully implement the clockevents on parisc!
> >>
> >> Your other patch ("RFC: m68k: mac: convert to generic clockevent")
> >> was a big help too, as it showed how it might work on parisc as well.
> >>
> >> Here is now a current version of the clockevents-enabling-patch for parisc:
> >> https://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git/commit/?h=for-next&id=3b7ab4a74a2d1972dbeb33285d85f1500b2ff96a
> >
> > Ah, nice!
> >
> >>> Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
> >>> the newly added legacy_timer_tick() helper.
> >>
> >> My patch still needs more testing, but if it turns to work
> >> out right, would you mind to drop your patch for parisc?
> >
> > I think it would be easier if you could base your patch on top of
> > my series, as they would otherwise inevitably conflict. I could either
> > add it to my tree, or you could merge my branch into your tree.
>
> Couldn't you drop your patch and include mine in your tree instead?
> That way nothing conflicts, and they get merged together?
That only works if nobody merges this branch into another one,
otherwise we end up with multiple copies of the later commits.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread
* [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick()
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
Replace the indirect function calls in the timer code
with direct calls to the newly added legacy_timer_tick()
helper for those that have not yet been converted to
generic clockevents.
This makes the timer code a little more self-contained.
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------
arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++--------------
arch/m68k/coldfire/sltimers.c | 6 ++----
arch/m68k/coldfire/timers.c | 6 ++----
4 files changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 694c4fca9f5d..322a35ef14c6 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -137,6 +137,7 @@ config M5206
bool "MCF5206"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -146,6 +147,7 @@ config M5206e
bool "MCF5206e"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -154,7 +156,7 @@ config M5206e
config M520x
bool "MCF520x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5207/5208 processor support.
@@ -162,7 +164,7 @@ config M520x
config M523x
bool "MCF523x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -172,6 +174,7 @@ config M5249
bool "MCF5249"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -181,6 +184,7 @@ config M525x
bool "MCF525x"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -189,10 +193,10 @@ config M525x
config M5271
bool "MCF5271"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
@@ -200,6 +204,7 @@ config M5272
bool "MCF5272"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -208,17 +213,17 @@ config M5272
config M5275
bool "MCF5275"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x
bool "MCF528x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -227,6 +232,7 @@ config M528x
config M5307
bool "MCF5307"
depends on !MMU
+ select COLDFIRE_TIMERS
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -237,6 +243,7 @@ config M5307
config M532x
bool "MCF532x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -245,6 +252,7 @@ config M532x
config M537x
bool "MCF537x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -254,6 +262,7 @@ config M5407
bool "MCF5407"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_CACHE_CB
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
@@ -263,6 +272,7 @@ config M5407
config M547x
bool "MCF547x"
select M54xx
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select HAVE_CACHE_CB
@@ -273,6 +283,7 @@ config M547x
config M548x
bool "MCF548x"
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select M54xx
@@ -284,8 +295,8 @@ config M548x
config M5441x
bool "MCF5441x"
+ select COLDFIRE_PIT_TIMER
select MMU_COLDFIRE if MMU
- select GENERIC_CLOCKEVENTS
select HAVE_CACHE_CB
help
Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
@@ -302,6 +313,18 @@ config M54xx
select HAVE_PCI
bool
+config COLDFIRE_PIT_TIMER
+ bool
+ select GENERIC_CLOCKEVENTS
+
+config COLDFIRE_TIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
+config COLDFIRE_SLTIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
endif # COLDFIRE
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index 573eabca1a3a..a3e18d73d8b8 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -16,20 +16,24 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
-obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
-obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
-obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
-obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M5206) += m5206.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o
+obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o intc.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o
+
+obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o
+obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o
+obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o
obj-$(CONFIG_NETtel) += nettel.o
obj-$(CONFIG_CLEOPATRA) += nettel.o
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 5ab81c9c552d..25a1319f3cb8 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -83,14 +83,13 @@ void mcfslt_profile_init(void)
static u32 mcfslt_cycles_per_jiffy;
static u32 mcfslt_cnt;
-static irq_handler_t timer_interrupt;
-
static irqreturn_t mcfslt_tick(int irq, void *dummy)
{
/* Reset Slice Timer 0 */
__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
mcfslt_cnt += mcfslt_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
static u64 mcfslt_read_clk(struct clocksource *cs)
@@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler)
/* initialize mcfslt_cnt knowing that slice timers count down */
mcfslt_cnt = mcfslt_cycles_per_jiffy;
- timer_interrupt = handler;
r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL);
if (r) {
pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index b8301fddf901..24b5e2d1b00b 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -48,8 +48,6 @@ void coldfire_profile_init(void);
static u32 mcftmr_cycles_per_jiffy;
static u32 mcftmr_cnt;
-static irq_handler_t timer_interrupt;
-
/***************************************************************************/
static void init_timer_irq(void)
@@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
mcftmr_cnt += mcftmr_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler)
clocksource_register_hz(&mcftmr_clk, FREQ);
- timer_interrupt = handler;
init_timer_irq();
r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
if (r) {
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick()
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
From: Arnd Bergmann <arnd@arndb.de>
Replace the indirect function calls in the timer code
with direct calls to the newly added legacy_timer_tick()
helper for those that have not yet been converted to
generic clockevents.
This makes the timer code a little more self-contained.
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------
arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++--------------
arch/m68k/coldfire/sltimers.c | 6 ++----
arch/m68k/coldfire/timers.c | 6 ++----
4 files changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 694c4fca9f5d..322a35ef14c6 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -137,6 +137,7 @@ config M5206
bool "MCF5206"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -146,6 +147,7 @@ config M5206e
bool "MCF5206e"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -154,7 +156,7 @@ config M5206e
config M520x
bool "MCF520x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5207/5208 processor support.
@@ -162,7 +164,7 @@ config M520x
config M523x
bool "MCF523x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -172,6 +174,7 @@ config M5249
bool "MCF5249"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -181,6 +184,7 @@ config M525x
bool "MCF525x"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -189,10 +193,10 @@ config M525x
config M5271
bool "MCF5271"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
@@ -200,6 +204,7 @@ config M5272
bool "MCF5272"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -208,17 +213,17 @@ config M5272
config M5275
bool "MCF5275"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x
bool "MCF528x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -227,6 +232,7 @@ config M528x
config M5307
bool "MCF5307"
depends on !MMU
+ select COLDFIRE_TIMERS
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -237,6 +243,7 @@ config M5307
config M532x
bool "MCF532x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -245,6 +252,7 @@ config M532x
config M537x
bool "MCF537x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -254,6 +262,7 @@ config M5407
bool "MCF5407"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_CACHE_CB
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
@@ -263,6 +272,7 @@ config M5407
config M547x
bool "MCF547x"
select M54xx
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select HAVE_CACHE_CB
@@ -273,6 +283,7 @@ config M547x
config M548x
bool "MCF548x"
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select M54xx
@@ -284,8 +295,8 @@ config M548x
config M5441x
bool "MCF5441x"
+ select COLDFIRE_PIT_TIMER
select MMU_COLDFIRE if MMU
- select GENERIC_CLOCKEVENTS
select HAVE_CACHE_CB
help
Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
@@ -302,6 +313,18 @@ config M54xx
select HAVE_PCI
bool
+config COLDFIRE_PIT_TIMER
+ bool
+ select GENERIC_CLOCKEVENTS
+
+config COLDFIRE_TIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
+config COLDFIRE_SLTIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
endif # COLDFIRE
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index 573eabca1a3a..a3e18d73d8b8 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -16,20 +16,24 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
-obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
-obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
-obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
-obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M5206) += m5206.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o
+obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o intc.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o
+
+obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o
+obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o
+obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o
obj-$(CONFIG_NETtel) += nettel.o
obj-$(CONFIG_CLEOPATRA) += nettel.o
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 5ab81c9c552d..25a1319f3cb8 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -83,14 +83,13 @@ void mcfslt_profile_init(void)
static u32 mcfslt_cycles_per_jiffy;
static u32 mcfslt_cnt;
-static irq_handler_t timer_interrupt;
-
static irqreturn_t mcfslt_tick(int irq, void *dummy)
{
/* Reset Slice Timer 0 */
__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
mcfslt_cnt += mcfslt_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
static u64 mcfslt_read_clk(struct clocksource *cs)
@@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler)
/* initialize mcfslt_cnt knowing that slice timers count down */
mcfslt_cnt = mcfslt_cycles_per_jiffy;
- timer_interrupt = handler;
r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL);
if (r) {
pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index b8301fddf901..24b5e2d1b00b 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -48,8 +48,6 @@ void coldfire_profile_init(void);
static u32 mcftmr_cycles_per_jiffy;
static u32 mcftmr_cnt;
-static irq_handler_t timer_interrupt;
-
/***************************************************************************/
static void init_timer_irq(void)
@@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
mcftmr_cnt += mcftmr_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler)
clocksource_register_hz(&mcftmr_clk, FREQ);
- timer_interrupt = handler;
init_timer_irq();
r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
if (r) {
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 08/15] m68k: coldfire: use legacy_timer_tick()
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
Replace the indirect function calls in the timer code
with direct calls to the newly added legacy_timer_tick()
helper for those that have not yet been converted to
generic clockevents.
This makes the timer code a little more self-contained.
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.cpu | 35 +++++++++++++++++++++++++++++------
arch/m68k/coldfire/Makefile | 32 ++++++++++++++++++--------------
arch/m68k/coldfire/sltimers.c | 6 ++----
arch/m68k/coldfire/timers.c | 6 ++----
4 files changed, 51 insertions(+), 28 deletions(-)
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 694c4fca9f5d..322a35ef14c6 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -137,6 +137,7 @@ config M5206
bool "MCF5206"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -146,6 +147,7 @@ config M5206e
bool "MCF5206e"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -154,7 +156,7 @@ config M5206e
config M520x
bool "MCF520x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
help
Freescale Coldfire 5207/5208 processor support.
@@ -162,7 +164,7 @@ config M520x
config M523x
bool "MCF523x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -172,6 +174,7 @@ config M5249
bool "MCF5249"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -181,6 +184,7 @@ config M525x
bool "MCF525x"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -189,10 +193,10 @@ config M525x
config M5271
bool "MCF5271"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5270/5271 processor support.
@@ -200,6 +204,7 @@ config M5272
bool "MCF5272"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
help
@@ -208,17 +213,17 @@ config M5272
config M5275
bool "MCF5275"
depends on !MMU
+ select COLDFIRE_PIT_TIMER
select M527x
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
- select GENERIC_CLOCKEVENTS
help
Freescale (Motorola) ColdFire 5274/5275 processor support.
config M528x
bool "MCF528x"
depends on !MMU
- select GENERIC_CLOCKEVENTS
+ select COLDFIRE_PIT_TIMER
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -227,6 +232,7 @@ config M528x
config M5307
bool "MCF5307"
depends on !MMU
+ select COLDFIRE_TIMERS
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -237,6 +243,7 @@ config M5307
config M532x
bool "MCF532x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -245,6 +252,7 @@ config M532x
config M537x
bool "MCF537x"
depends on !MMU
+ select COLDFIRE_TIMERS
select M53xx
select HAVE_CACHE_CB
help
@@ -254,6 +262,7 @@ config M5407
bool "MCF5407"
depends on !MMU
select COLDFIRE_SW_A7
+ select COLDFIRE_TIMERS
select HAVE_CACHE_CB
select HAVE_MBAR
select CPU_NO_EFFICIENT_FFS
@@ -263,6 +272,7 @@ config M5407
config M547x
bool "MCF547x"
select M54xx
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select HAVE_CACHE_CB
@@ -273,6 +283,7 @@ config M547x
config M548x
bool "MCF548x"
+ select COLDFIRE_SLTIMERS
select MMU_COLDFIRE if MMU
select FPU if MMU
select M54xx
@@ -284,8 +295,8 @@ config M548x
config M5441x
bool "MCF5441x"
+ select COLDFIRE_PIT_TIMER
select MMU_COLDFIRE if MMU
- select GENERIC_CLOCKEVENTS
select HAVE_CACHE_CB
help
Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
@@ -302,6 +313,18 @@ config M54xx
select HAVE_PCI
bool
+config COLDFIRE_PIT_TIMER
+ bool
+ select GENERIC_CLOCKEVENTS
+
+config COLDFIRE_TIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
+config COLDFIRE_SLTIMERS
+ bool
+ select LEGACY_TIMER_TICK
+
endif # COLDFIRE
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index 573eabca1a3a..a3e18d73d8b8 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -16,20 +16,24 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
-obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
-obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
-obj-$(CONFIG_M53xx) += m53xx.o timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
-obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
-obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M5206) += m5206.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o intc.o intc-525x.o reset.o
+obj-$(CONFIG_M527x) += m527x.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o
+obj-$(CONFIG_M528x) += m528x.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o intc.o reset.o
+obj-$(CONFIG_M53xx) += m53xx.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o intc-simr.o reset.o
+
+obj-$(CONFIG_COLDFIRE_PIT_TIMER) += pit.o
+obj-$(CONFIG_COLDFIRE_TIMERS) += timers.o
+obj-$(CONFIG_COLDFIRE_SLTIMERS) += sltimers.o
obj-$(CONFIG_NETtel) += nettel.o
obj-$(CONFIG_CLEOPATRA) += nettel.o
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 5ab81c9c552d..25a1319f3cb8 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -83,14 +83,13 @@ void mcfslt_profile_init(void)
static u32 mcfslt_cycles_per_jiffy;
static u32 mcfslt_cnt;
-static irq_handler_t timer_interrupt;
-
static irqreturn_t mcfslt_tick(int irq, void *dummy)
{
/* Reset Slice Timer 0 */
__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
mcfslt_cnt += mcfslt_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
static u64 mcfslt_read_clk(struct clocksource *cs)
@@ -136,7 +135,6 @@ void hw_timer_init(irq_handler_t handler)
/* initialize mcfslt_cnt knowing that slice timers count down */
mcfslt_cnt = mcfslt_cycles_per_jiffy;
- timer_interrupt = handler;
r = request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL);
if (r) {
pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index b8301fddf901..24b5e2d1b00b 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -48,8 +48,6 @@ void coldfire_profile_init(void);
static u32 mcftmr_cycles_per_jiffy;
static u32 mcftmr_cnt;
-static irq_handler_t timer_interrupt;
-
/***************************************************************************/
static void init_timer_irq(void)
@@ -77,7 +75,8 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
mcftmr_cnt += mcftmr_cycles_per_jiffy;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -126,7 +125,6 @@ void hw_timer_init(irq_handler_t handler)
clocksource_register_hz(&mcftmr_clk, FREQ);
- timer_interrupt = handler;
init_timer_irq();
r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
if (r) {
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 09/15] m68k: split heartbeat out of timer function
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
The heartbeat functionality is mostly separate from the
actual timer interrupt handling, and it is only used on
five platforms.
Split it out into a separate function and call that directly
from the timer irq on those platforms.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/amiga/config.c | 1 +
arch/m68k/apollo/config.c | 1 +
arch/m68k/atari/time.c | 2 ++
arch/m68k/hp300/time.c | 1 +
arch/m68k/include/asm/machdep.h | 7 +++++++
arch/m68k/kernel/time.c | 7 +++++--
arch/m68k/q40/q40ints.c | 2 ++
7 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index bee9f240f35d..29f92333119e 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -480,6 +480,7 @@ static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
clk_total += jiffy_ticks;
clk_offset = 0;
timer_routine(0, NULL);
+ timer_heartbeat();
return IRQ_HANDLED;
}
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 762da5d7a415..30915f1a8760 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -173,6 +173,7 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
volatile unsigned char x;
timer_handler(irq, dev_id);
+ timer_heartbeat();
x = *(volatile unsigned char *)(apollo_timer + 3);
x = *(volatile unsigned char *)(apollo_timer + 5);
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index ce923a523695..ce4a5961ca93 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -21,6 +21,7 @@
#include <linux/export.h>
#include <asm/atariints.h>
+#include <asm/machdep.h>
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL_GPL(rtc_lock);
@@ -49,6 +50,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
} while (last_timer_count == 1);
clk_total += INT_TICKS;
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
return IRQ_HANDLED;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index bfee13e1d0fe..e3cd938de0f9 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -65,6 +65,7 @@ static irqreturn_t hp300_tick(int irq, void *dev_id)
clk_total += INTVAL;
clk_offset = 0;
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
/* Turn off the network and SCSI leds */
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 49bd3266b4b1..e62a39d01ae4 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -35,6 +35,13 @@ extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */
extern void hw_timer_init(irq_handler_t handler);
extern unsigned long hw_timer_offset(void);
+#ifdef CONFIG_HEARTBEAT
+extern void timer_heartbeat(void);
+#else
+static inline void timer_heartbeat(void)
+{
+}
+#endif
extern void config_BSP(char *command, int len);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index c2697a4d4ddd..c05cec21b05f 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -45,8 +45,12 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
+ return IRQ_HANDLED;
+}
#ifdef CONFIG_HEARTBEAT
+void timer_heartbeat(void)
+{
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
@@ -68,9 +72,8 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
dist = period / 4;
}
}
-#endif /* CONFIG_HEARTBEAT */
- return IRQ_HANDLED;
}
+#endif /* CONFIG_HEARTBEAT */
#ifdef CONFIG_M68KCLASSIC
#if !IS_BUILTIN(CONFIG_RTC_DRV_GENERIC)
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 1c696906c159..b01b545a2db0 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/machdep.h>
#include <asm/ptrace.h>
#include <asm/traps.h>
@@ -144,6 +145,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
local_irq_save(flags);
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
}
return IRQ_HANDLED;
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 09/15] m68k: split heartbeat out of timer function
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
The heartbeat functionality is mostly separate from the
actual timer interrupt handling, and it is only used on
five platforms.
Split it out into a separate function and call that directly
from the timer irq on those platforms.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/amiga/config.c | 1 +
arch/m68k/apollo/config.c | 1 +
arch/m68k/atari/time.c | 2 ++
arch/m68k/hp300/time.c | 1 +
arch/m68k/include/asm/machdep.h | 7 +++++++
arch/m68k/kernel/time.c | 7 +++++--
arch/m68k/q40/q40ints.c | 2 ++
7 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index bee9f240f35d..29f92333119e 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -480,6 +480,7 @@ static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
clk_total += jiffy_ticks;
clk_offset = 0;
timer_routine(0, NULL);
+ timer_heartbeat();
return IRQ_HANDLED;
}
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 762da5d7a415..30915f1a8760 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -173,6 +173,7 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
volatile unsigned char x;
timer_handler(irq, dev_id);
+ timer_heartbeat();
x = *(volatile unsigned char *)(apollo_timer + 3);
x = *(volatile unsigned char *)(apollo_timer + 5);
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index ce923a523695..ce4a5961ca93 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -21,6 +21,7 @@
#include <linux/export.h>
#include <asm/atariints.h>
+#include <asm/machdep.h>
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL_GPL(rtc_lock);
@@ -49,6 +50,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
} while (last_timer_count = 1);
clk_total += INT_TICKS;
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
return IRQ_HANDLED;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index bfee13e1d0fe..e3cd938de0f9 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -65,6 +65,7 @@ static irqreturn_t hp300_tick(int irq, void *dev_id)
clk_total += INTVAL;
clk_offset = 0;
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
/* Turn off the network and SCSI leds */
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 49bd3266b4b1..e62a39d01ae4 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -35,6 +35,13 @@ extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */
extern void hw_timer_init(irq_handler_t handler);
extern unsigned long hw_timer_offset(void);
+#ifdef CONFIG_HEARTBEAT
+extern void timer_heartbeat(void);
+#else
+static inline void timer_heartbeat(void)
+{
+}
+#endif
extern void config_BSP(char *command, int len);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index c2697a4d4ddd..c05cec21b05f 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -45,8 +45,12 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
+ return IRQ_HANDLED;
+}
#ifdef CONFIG_HEARTBEAT
+void timer_heartbeat(void)
+{
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
@@ -68,9 +72,8 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
dist = period / 4;
}
}
-#endif /* CONFIG_HEARTBEAT */
- return IRQ_HANDLED;
}
+#endif /* CONFIG_HEARTBEAT */
#ifdef CONFIG_M68KCLASSIC
#if !IS_BUILTIN(CONFIG_RTC_DRV_GENERIC)
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 1c696906c159..b01b545a2db0 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/machdep.h>
#include <asm/ptrace.h>
#include <asm/traps.h>
@@ -144,6 +145,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
local_irq_save(flags);
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
}
return IRQ_HANDLED;
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 09/15] m68k: split heartbeat out of timer function
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
The heartbeat functionality is mostly separate from the
actual timer interrupt handling, and it is only used on
five platforms.
Split it out into a separate function and call that directly
from the timer irq on those platforms.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/amiga/config.c | 1 +
arch/m68k/apollo/config.c | 1 +
arch/m68k/atari/time.c | 2 ++
arch/m68k/hp300/time.c | 1 +
arch/m68k/include/asm/machdep.h | 7 +++++++
arch/m68k/kernel/time.c | 7 +++++--
arch/m68k/q40/q40ints.c | 2 ++
7 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index bee9f240f35d..29f92333119e 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -480,6 +480,7 @@ static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
clk_total += jiffy_ticks;
clk_offset = 0;
timer_routine(0, NULL);
+ timer_heartbeat();
return IRQ_HANDLED;
}
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 762da5d7a415..30915f1a8760 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -173,6 +173,7 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
volatile unsigned char x;
timer_handler(irq, dev_id);
+ timer_heartbeat();
x = *(volatile unsigned char *)(apollo_timer + 3);
x = *(volatile unsigned char *)(apollo_timer + 5);
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index ce923a523695..ce4a5961ca93 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -21,6 +21,7 @@
#include <linux/export.h>
#include <asm/atariints.h>
+#include <asm/machdep.h>
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL_GPL(rtc_lock);
@@ -49,6 +50,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
} while (last_timer_count == 1);
clk_total += INT_TICKS;
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
return IRQ_HANDLED;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index bfee13e1d0fe..e3cd938de0f9 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -65,6 +65,7 @@ static irqreturn_t hp300_tick(int irq, void *dev_id)
clk_total += INTVAL;
clk_offset = 0;
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
/* Turn off the network and SCSI leds */
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 49bd3266b4b1..e62a39d01ae4 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -35,6 +35,13 @@ extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */
extern void hw_timer_init(irq_handler_t handler);
extern unsigned long hw_timer_offset(void);
+#ifdef CONFIG_HEARTBEAT
+extern void timer_heartbeat(void);
+#else
+static inline void timer_heartbeat(void)
+{
+}
+#endif
extern void config_BSP(char *command, int len);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index c2697a4d4ddd..c05cec21b05f 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -45,8 +45,12 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
+ return IRQ_HANDLED;
+}
#ifdef CONFIG_HEARTBEAT
+void timer_heartbeat(void)
+{
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
@@ -68,9 +72,8 @@ static irqreturn_t timer_interrupt(int irq, void *dummy)
dist = period / 4;
}
}
-#endif /* CONFIG_HEARTBEAT */
- return IRQ_HANDLED;
}
+#endif /* CONFIG_HEARTBEAT */
#ifdef CONFIG_M68KCLASSIC
#if !IS_BUILTIN(CONFIG_RTC_DRV_GENERIC)
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 1c696906c159..b01b545a2db0 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/machdep.h>
#include <asm/ptrace.h>
#include <asm/traps.h>
@@ -144,6 +145,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
local_irq_save(flags);
timer_routine(0, NULL);
+ timer_heartbeat();
local_irq_restore(flags);
}
return IRQ_HANDLED;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 10/15] m68k: sun3/sun3c: use legacy_timer_tick
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
These two are different from all other machines:
* sun3 does not call timer_routine() but open-codes it
except for the profile_tick() call that appears to
be unintentionally missing.
* sun3x has a commented-out timer irq handler but no
functional timer tick I could find.
Change both to calling the new legacy_timer_tick here,
which includes the call to profile_tick() but does not
fix sun3x as that is still commented out.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.machine | 2 ++
arch/m68k/sun3/sun3ints.c | 3 +--
arch/m68k/sun3x/time.c | 3 +--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 17e8c3a292d7..e3c835440d9a 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -99,6 +99,7 @@ config HP300
config SUN3X
bool "Sun3x support"
depends on MMU
+ select LEGACY_TIMER_TICK
select MMU_MOTOROLA if MMU
select M68030
help
@@ -126,6 +127,7 @@ config SUN3
depends on MMU
depends on !MMU_MOTOROLA
select MMU_SUN3 if MMU
+ select LEGACY_TIMER_TICK
select NO_DMA
select M68020
help
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index a5824abb4a39..41ae422119d3 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -73,8 +73,7 @@ static irqreturn_t sun3_int5(int irq, void *dev_id)
#ifdef CONFIG_SUN3
intersil_clear();
#endif
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
+ legacy_timer_tick(1);
cnt = kstat_irqs_cpu(irq, 0);
if (!(cnt % 20))
sun3_leds(led_pattern[cnt % 160 / 20]);
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index 9163294b0fb6..f6e25fdc008c 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -77,14 +77,13 @@ int sun3x_hwclk(int set, struct rtc_time *t)
#if 0
static irqreturn_t sun3x_timer_tick(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
/* Clear the pending interrupt - pulse the enable line low */
disable_irq(5);
enable_irq(5);
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 10/15] m68k: sun3/sun3c: use legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
These two are different from all other machines:
* sun3 does not call timer_routine() but open-codes it
except for the profile_tick() call that appears to
be unintentionally missing.
* sun3x has a commented-out timer irq handler but no
functional timer tick I could find.
Change both to calling the new legacy_timer_tick here,
which includes the call to profile_tick() but does not
fix sun3x as that is still commented out.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.machine | 2 ++
arch/m68k/sun3/sun3ints.c | 3 +--
arch/m68k/sun3x/time.c | 3 +--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 17e8c3a292d7..e3c835440d9a 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -99,6 +99,7 @@ config HP300
config SUN3X
bool "Sun3x support"
depends on MMU
+ select LEGACY_TIMER_TICK
select MMU_MOTOROLA if MMU
select M68030
help
@@ -126,6 +127,7 @@ config SUN3
depends on MMU
depends on !MMU_MOTOROLA
select MMU_SUN3 if MMU
+ select LEGACY_TIMER_TICK
select NO_DMA
select M68020
help
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index a5824abb4a39..41ae422119d3 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -73,8 +73,7 @@ static irqreturn_t sun3_int5(int irq, void *dev_id)
#ifdef CONFIG_SUN3
intersil_clear();
#endif
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
+ legacy_timer_tick(1);
cnt = kstat_irqs_cpu(irq, 0);
if (!(cnt % 20))
sun3_leds(led_pattern[cnt % 160 / 20]);
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index 9163294b0fb6..f6e25fdc008c 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -77,14 +77,13 @@ int sun3x_hwclk(int set, struct rtc_time *t)
#if 0
static irqreturn_t sun3x_timer_tick(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
/* Clear the pending interrupt - pulse the enable line low */
disable_irq(5);
enable_irq(5);
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 10/15] m68k: sun3/sun3c: use legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
These two are different from all other machines:
* sun3 does not call timer_routine() but open-codes it
except for the profile_tick() call that appears to
be unintentionally missing.
* sun3x has a commented-out timer irq handler but no
functional timer tick I could find.
Change both to calling the new legacy_timer_tick here,
which includes the call to profile_tick() but does not
fix sun3x as that is still commented out.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.machine | 2 ++
arch/m68k/sun3/sun3ints.c | 3 +--
arch/m68k/sun3x/time.c | 3 +--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 17e8c3a292d7..e3c835440d9a 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -99,6 +99,7 @@ config HP300
config SUN3X
bool "Sun3x support"
depends on MMU
+ select LEGACY_TIMER_TICK
select MMU_MOTOROLA if MMU
select M68030
help
@@ -126,6 +127,7 @@ config SUN3
depends on MMU
depends on !MMU_MOTOROLA
select MMU_SUN3 if MMU
+ select LEGACY_TIMER_TICK
select NO_DMA
select M68020
help
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index a5824abb4a39..41ae422119d3 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -73,8 +73,7 @@ static irqreturn_t sun3_int5(int irq, void *dev_id)
#ifdef CONFIG_SUN3
intersil_clear();
#endif
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
+ legacy_timer_tick(1);
cnt = kstat_irqs_cpu(irq, 0);
if (!(cnt % 20))
sun3_leds(led_pattern[cnt % 160 / 20]);
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index 9163294b0fb6..f6e25fdc008c 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -77,14 +77,13 @@ int sun3x_hwclk(int set, struct rtc_time *t)
#if 0
static irqreturn_t sun3x_timer_tick(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
/* Clear the pending interrupt - pulse the enable line low */
disable_irq(5);
enable_irq(5);
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 11/15] m68k: m68328: use legacy_timer_tick()
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
A couple of machines share the m68328 timer code that
is based on calling timer_interrupt(). Change these
to the new and slightly more generic legacy_timer_tick()
helper.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/68000/timers.c | 5 ++---
arch/m68k/Kconfig.cpu | 3 +++
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
index e8dfdd2556a5..3aa006f8e7ea 100644
--- a/arch/m68k/68000/timers.c
+++ b/arch/m68k/68000/timers.c
@@ -52,7 +52,6 @@
#endif
static u32 m68328_tick_cnt;
-static irq_handler_t timer_interrupt;
/***************************************************************************/
@@ -62,7 +61,8 @@ static irqreturn_t hw_tick(int irq, void *dummy)
TSTAT &= 0;
m68328_tick_cnt += TICKS_PER_JIFFY;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -113,7 +113,6 @@ void hw_timer_init(irq_handler_t handler)
/* Enable timer 1 */
TCTL |= TCTL_TEN;
clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
- timer_interrupt = handler;
}
/***************************************************************************/
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 322a35ef14c6..648054d4f860 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -104,6 +104,7 @@ config M68060
config M68328
bool "MC68328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68328 processor support.
@@ -111,6 +112,7 @@ config M68328
config M68EZ328
bool "MC68EZ328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68EX328 processor support.
@@ -118,6 +120,7 @@ config M68EZ328
config M68VZ328
bool "MC68VZ328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68VZ328 processor support.
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 11/15] m68k: m68328: use legacy_timer_tick()
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
A couple of machines share the m68328 timer code that
is based on calling timer_interrupt(). Change these
to the new and slightly more generic legacy_timer_tick()
helper.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/68000/timers.c | 5 ++---
arch/m68k/Kconfig.cpu | 3 +++
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
index e8dfdd2556a5..3aa006f8e7ea 100644
--- a/arch/m68k/68000/timers.c
+++ b/arch/m68k/68000/timers.c
@@ -52,7 +52,6 @@
#endif
static u32 m68328_tick_cnt;
-static irq_handler_t timer_interrupt;
/***************************************************************************/
@@ -62,7 +61,8 @@ static irqreturn_t hw_tick(int irq, void *dummy)
TSTAT &= 0;
m68328_tick_cnt += TICKS_PER_JIFFY;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -113,7 +113,6 @@ void hw_timer_init(irq_handler_t handler)
/* Enable timer 1 */
TCTL |= TCTL_TEN;
clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
- timer_interrupt = handler;
}
/***************************************************************************/
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 322a35ef14c6..648054d4f860 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -104,6 +104,7 @@ config M68060
config M68328
bool "MC68328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68328 processor support.
@@ -111,6 +112,7 @@ config M68328
config M68EZ328
bool "MC68EZ328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68EX328 processor support.
@@ -118,6 +120,7 @@ config M68EZ328
config M68VZ328
bool "MC68VZ328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68VZ328 processor support.
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 11/15] m68k: m68328: use legacy_timer_tick()
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
A couple of machines share the m68328 timer code that
is based on calling timer_interrupt(). Change these
to the new and slightly more generic legacy_timer_tick()
helper.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/68000/timers.c | 5 ++---
arch/m68k/Kconfig.cpu | 3 +++
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
index e8dfdd2556a5..3aa006f8e7ea 100644
--- a/arch/m68k/68000/timers.c
+++ b/arch/m68k/68000/timers.c
@@ -52,7 +52,6 @@
#endif
static u32 m68328_tick_cnt;
-static irq_handler_t timer_interrupt;
/***************************************************************************/
@@ -62,7 +61,8 @@ static irqreturn_t hw_tick(int irq, void *dummy)
TSTAT &= 0;
m68328_tick_cnt += TICKS_PER_JIFFY;
- return timer_interrupt(irq, dummy);
+ legacy_timer_tick(1);
+ return IRQ_HANDLED;
}
/***************************************************************************/
@@ -113,7 +113,6 @@ void hw_timer_init(irq_handler_t handler)
/* Enable timer 1 */
TCTL |= TCTL_TEN;
clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
- timer_interrupt = handler;
}
/***************************************************************************/
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 322a35ef14c6..648054d4f860 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -104,6 +104,7 @@ config M68060
config M68328
bool "MC68328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68328 processor support.
@@ -111,6 +112,7 @@ config M68328
config M68EZ328
bool "MC68EZ328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68EX328 processor support.
@@ -118,6 +120,7 @@ config M68EZ328
config M68VZ328
bool "MC68VZ328"
depends on !MMU
+ select LEGACY_TIMER_TICK
select M68000
help
Motorola 68VZ328 processor support.
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 12/15] m68k: change remaining timers to legacy_timer_tick
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
There are nine more machines that each have their own timer interrupt
calling the m68k timer_interrupt() function through an indirect pointer.
This function is now the same as legacy_timer_tick, so just call that
directly and select the corresponding Kconfig symbol.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.machine | 9 +++++++++
arch/m68k/amiga/config.c | 6 ++----
arch/m68k/apollo/config.c | 6 ++----
arch/m68k/atari/time.c | 5 ++---
arch/m68k/bvme6000/config.c | 5 ++---
arch/m68k/hp300/time.c | 5 ++---
arch/m68k/mac/via.c | 6 ++----
arch/m68k/mvme147/config.c | 5 ++---
arch/m68k/mvme16x/config.c | 5 ++---
arch/m68k/q40/q40ints.c | 6 ++----
10 files changed, 27 insertions(+), 31 deletions(-)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index e3c835440d9a..b47ac37484fa 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -7,6 +7,7 @@ config AMIGA
bool "Amiga support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
This option enables support for the Amiga series of computers. If
you plan to use this kernel on an Amiga, say Y here and browse the
@@ -17,6 +18,7 @@ config ATARI
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
+ select LEGACY_TIMER_TICK
help
This option enables support for the 68000-based Atari series of
computers (including the TT, Falcon and Medusa). If you plan to use
@@ -28,6 +30,7 @@ config MAC
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
+ select LEGACY_TIMER_TICK
help
This option enables support for the Apple Macintosh series of
computers (yes, there is experimental support now, at least for part
@@ -40,6 +43,7 @@ config APOLLO
bool "Apollo support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
Say Y here if you want to run Linux on an MC680x0-based Apollo
Domain workstation such as the DN3500.
@@ -58,6 +62,7 @@ config MVME147
bool "MVME147 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for early Motorola VME boards. This will
build a kernel which can run on MVME147 single-board computers. If
@@ -68,6 +73,7 @@ config MVME16x
bool "MVME162, 166 and 167 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for Motorola VME boards. This will build a
kernel which can run on MVME162, MVME166, MVME167, MVME172, and
@@ -79,6 +85,7 @@ config BVME6000
bool "BVME4000 and BVME6000 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for VME boards from BVM Ltd. This will
build a kernel which can run on BVME4000 and BVME6000 boards. If
@@ -89,6 +96,7 @@ config HP300
bool "HP9000/300 and HP9000/400 support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
This option enables support for the HP9000/300 and HP9000/400 series
of workstations. Support for these machines is still somewhat
@@ -115,6 +123,7 @@ config Q40
bool "Q40/Q60 support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
The Q40 is a Motorola 68040-based successor to the Sinclair QL
manufactured in Germany. There is an official Q40 home page at
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 29f92333119e..91dc87b86411 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -475,11 +475,9 @@ static u32 clk_total, clk_offset;
static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
clk_total += jiffy_ticks;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
return IRQ_HANDLED;
@@ -504,7 +502,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
* SCSI code. We'll have to take a look at this later
*/
if (request_irq(IRQ_AMIGA_CIAB_TA, ciab_timer_handler, IRQF_TIMER,
- "timer", timer_routine))
+ "timer", NULL))
pr_err("Couldn't register timer interrupt\n");
/* start timer */
ciab.cra |= 0x11;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 30915f1a8760..17d59fa6b25b 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -168,11 +168,9 @@ void __init config_apollo(void)
irqreturn_t dn_timer_int(int irq, void *dev_id)
{
- irq_handler_t timer_handler = dev_id;
-
volatile unsigned char x;
- timer_handler(irq, dev_id);
+ legacy_timer_tick(1);
timer_heartbeat();
x = *(volatile unsigned char *)(apollo_timer + 3);
@@ -199,7 +197,7 @@ void dn_sched_init(irq_handler_t timer_routine)
*(volatile unsigned char *)(apollo_timer + 0x3));
#endif
- if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
+ if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", NULL))
pr_err("Couldn't register timer interrupt\n");
}
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index ce4a5961ca93..36d811ae09ee 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -41,7 +41,6 @@ static u8 last_timer_count;
static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
@@ -49,7 +48,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
last_timer_count = st_mfp.tim_dt_c;
} while (last_timer_count == 1);
clk_total += INT_TICKS;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
@@ -65,7 +64,7 @@ atari_sched_init(irq_handler_t timer_routine)
st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
/* install interrupt service routine for MFP Timer C */
if (request_irq(IRQ_MFP_TIMC, mfp_timer_c_handler, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
pr_err("Couldn't register timer interrupt\n");
clocksource_register_hz(&atari_clk, INT_CLK);
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 50f4d01363df..d3f5963021d3 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -165,7 +165,6 @@ static u32 clk_total, clk_offset;
static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
unsigned char msr;
@@ -175,7 +174,7 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
rtc->msr = msr | 0x20; /* Ack the interrupt */
clk_total += RTC_TIMER_CYCLES;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -198,7 +197,7 @@ void bvme6000_sched_init (irq_handler_t timer_routine)
rtc->msr = 0; /* Ensure timer registers accessible */
if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
panic ("Couldn't register timer int");
rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index e3cd938de0f9..011fc2e5a68a 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -55,7 +55,6 @@ static u32 clk_total, clk_offset;
static irqreturn_t hp300_tick(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
unsigned long tmp;
@@ -64,7 +63,7 @@ static irqreturn_t hp300_tick(int irq, void *dev_id)
asm volatile ("movpw %1@(5),%0" : "=d" (tmp) : "a" (CLOCKBASE));
clk_total += INTVAL;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
@@ -106,7 +105,7 @@ void __init hp300_sched_init(irq_handler_t vector)
asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
- if (request_irq(IRQ_AUTO_6, hp300_tick, IRQF_TIMER, "timer tick", vector))
+ if (request_irq(IRQ_AUTO_6, hp300_tick, IRQF_TIMER, "timer tick", NULL))
pr_err("Couldn't register timer interrupt\n");
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index ac77d73af19a..ba444e1774b8 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -602,11 +602,9 @@ static u32 clk_total, clk_offset;
static irqreturn_t via_timer_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
clk_total += VIA_TIMER_CYCLES;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
return IRQ_HANDLED;
}
@@ -614,7 +612,7 @@ static irqreturn_t via_timer_handler(int irq, void *dev_id)
void __init via_init_clock(irq_handler_t timer_routine)
{
if (request_irq(IRQ_MAC_TIMER_1, via_timer_handler, IRQF_TIMER, "timer",
- timer_routine)) {
+ NULL)) {
pr_err("Couldn't register %s interrupt\n", "timer");
return;
}
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 490700aa2212..5dabbc915b8d 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -112,14 +112,13 @@ static u32 clk_total;
static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;
m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF;
clk_total += PCC_TIMER_CYCLES;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -129,7 +128,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
void mvme147_sched_init (irq_handler_t timer_routine)
{
if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQF_TIMER,
- "timer 1", timer_routine))
+ "timer 1", NULL))
pr_err("Couldn't register timer interrupt\n");
/* Init the clock with a value */
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 5b86d10e0f84..ae9bb7fda161 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -372,14 +372,13 @@ static u32 clk_total;
static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
out_8(PCCTIC1, in_8(PCCTIC1) | PCCTIC1_INT_CLR);
out_8(PCCTOVR1, PCCTOVR1_OVR_CLR);
clk_total += PCC_TIMER_CYCLES;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -396,7 +395,7 @@ void mvme16x_sched_init (irq_handler_t timer_routine)
out_8(PCCTOVR1, in_8(PCCTOVR1) | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
out_8(PCCTIC1, PCCTIC1_INT_EN | 6);
if (request_irq(MVME16x_IRQ_TIMER, mvme16x_timer_int, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
panic ("Couldn't register timer int");
clocksource_register_hz(&mvme16x_clk, PCC_TIMER_CLOCK_FREQ);
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index b01b545a2db0..4c6c409053fd 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -130,8 +130,6 @@ void q40_mksound(unsigned int hz, unsigned int ticks)
static irqreturn_t q40_timer_int(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
ql_ticks = ql_ticks ? 0 : 1;
if (sound_ticks) {
unsigned char sval=(sound_ticks & 1) ? 128-SVOL : 128+SVOL;
@@ -144,7 +142,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
unsigned long flags;
local_irq_save(flags);
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
}
@@ -157,7 +155,7 @@ void q40_sched_init (irq_handler_t timer_routine)
timer_irq = Q40_IRQ_FRAME;
- if (request_irq(timer_irq, q40_timer_int, 0, "timer", timer_routine))
+ if (request_irq(timer_irq, q40_timer_int, 0, "timer", NULL))
panic("Couldn't register timer int");
master_outb(-1, FRAME_CLEAR_REG);
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 12/15] m68k: change remaining timers to legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
There are nine more machines that each have their own timer interrupt
calling the m68k timer_interrupt() function through an indirect pointer.
This function is now the same as legacy_timer_tick, so just call that
directly and select the corresponding Kconfig symbol.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.machine | 9 +++++++++
arch/m68k/amiga/config.c | 6 ++----
arch/m68k/apollo/config.c | 6 ++----
arch/m68k/atari/time.c | 5 ++---
arch/m68k/bvme6000/config.c | 5 ++---
arch/m68k/hp300/time.c | 5 ++---
arch/m68k/mac/via.c | 6 ++----
arch/m68k/mvme147/config.c | 5 ++---
arch/m68k/mvme16x/config.c | 5 ++---
arch/m68k/q40/q40ints.c | 6 ++----
10 files changed, 27 insertions(+), 31 deletions(-)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index e3c835440d9a..b47ac37484fa 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -7,6 +7,7 @@ config AMIGA
bool "Amiga support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
This option enables support for the Amiga series of computers. If
you plan to use this kernel on an Amiga, say Y here and browse the
@@ -17,6 +18,7 @@ config ATARI
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
+ select LEGACY_TIMER_TICK
help
This option enables support for the 68000-based Atari series of
computers (including the TT, Falcon and Medusa). If you plan to use
@@ -28,6 +30,7 @@ config MAC
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
+ select LEGACY_TIMER_TICK
help
This option enables support for the Apple Macintosh series of
computers (yes, there is experimental support now, at least for part
@@ -40,6 +43,7 @@ config APOLLO
bool "Apollo support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
Say Y here if you want to run Linux on an MC680x0-based Apollo
Domain workstation such as the DN3500.
@@ -58,6 +62,7 @@ config MVME147
bool "MVME147 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for early Motorola VME boards. This will
build a kernel which can run on MVME147 single-board computers. If
@@ -68,6 +73,7 @@ config MVME16x
bool "MVME162, 166 and 167 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for Motorola VME boards. This will build a
kernel which can run on MVME162, MVME166, MVME167, MVME172, and
@@ -79,6 +85,7 @@ config BVME6000
bool "BVME4000 and BVME6000 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for VME boards from BVM Ltd. This will
build a kernel which can run on BVME4000 and BVME6000 boards. If
@@ -89,6 +96,7 @@ config HP300
bool "HP9000/300 and HP9000/400 support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
This option enables support for the HP9000/300 and HP9000/400 series
of workstations. Support for these machines is still somewhat
@@ -115,6 +123,7 @@ config Q40
bool "Q40/Q60 support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
The Q40 is a Motorola 68040-based successor to the Sinclair QL
manufactured in Germany. There is an official Q40 home page at
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 29f92333119e..91dc87b86411 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -475,11 +475,9 @@ static u32 clk_total, clk_offset;
static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
clk_total += jiffy_ticks;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
return IRQ_HANDLED;
@@ -504,7 +502,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
* SCSI code. We'll have to take a look at this later
*/
if (request_irq(IRQ_AMIGA_CIAB_TA, ciab_timer_handler, IRQF_TIMER,
- "timer", timer_routine))
+ "timer", NULL))
pr_err("Couldn't register timer interrupt\n");
/* start timer */
ciab.cra |= 0x11;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 30915f1a8760..17d59fa6b25b 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -168,11 +168,9 @@ void __init config_apollo(void)
irqreturn_t dn_timer_int(int irq, void *dev_id)
{
- irq_handler_t timer_handler = dev_id;
-
volatile unsigned char x;
- timer_handler(irq, dev_id);
+ legacy_timer_tick(1);
timer_heartbeat();
x = *(volatile unsigned char *)(apollo_timer + 3);
@@ -199,7 +197,7 @@ void dn_sched_init(irq_handler_t timer_routine)
*(volatile unsigned char *)(apollo_timer + 0x3));
#endif
- if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
+ if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", NULL))
pr_err("Couldn't register timer interrupt\n");
}
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index ce4a5961ca93..36d811ae09ee 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -41,7 +41,6 @@ static u8 last_timer_count;
static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
@@ -49,7 +48,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
last_timer_count = st_mfp.tim_dt_c;
} while (last_timer_count = 1);
clk_total += INT_TICKS;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
@@ -65,7 +64,7 @@ atari_sched_init(irq_handler_t timer_routine)
st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
/* install interrupt service routine for MFP Timer C */
if (request_irq(IRQ_MFP_TIMC, mfp_timer_c_handler, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
pr_err("Couldn't register timer interrupt\n");
clocksource_register_hz(&atari_clk, INT_CLK);
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 50f4d01363df..d3f5963021d3 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -165,7 +165,6 @@ static u32 clk_total, clk_offset;
static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
unsigned char msr;
@@ -175,7 +174,7 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
rtc->msr = msr | 0x20; /* Ack the interrupt */
clk_total += RTC_TIMER_CYCLES;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -198,7 +197,7 @@ void bvme6000_sched_init (irq_handler_t timer_routine)
rtc->msr = 0; /* Ensure timer registers accessible */
if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
panic ("Couldn't register timer int");
rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index e3cd938de0f9..011fc2e5a68a 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -55,7 +55,6 @@ static u32 clk_total, clk_offset;
static irqreturn_t hp300_tick(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
unsigned long tmp;
@@ -64,7 +63,7 @@ static irqreturn_t hp300_tick(int irq, void *dev_id)
asm volatile ("movpw %1@(5),%0" : "=d" (tmp) : "a" (CLOCKBASE));
clk_total += INTVAL;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
@@ -106,7 +105,7 @@ void __init hp300_sched_init(irq_handler_t vector)
asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
- if (request_irq(IRQ_AUTO_6, hp300_tick, IRQF_TIMER, "timer tick", vector))
+ if (request_irq(IRQ_AUTO_6, hp300_tick, IRQF_TIMER, "timer tick", NULL))
pr_err("Couldn't register timer interrupt\n");
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index ac77d73af19a..ba444e1774b8 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -602,11 +602,9 @@ static u32 clk_total, clk_offset;
static irqreturn_t via_timer_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
clk_total += VIA_TIMER_CYCLES;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
return IRQ_HANDLED;
}
@@ -614,7 +612,7 @@ static irqreturn_t via_timer_handler(int irq, void *dev_id)
void __init via_init_clock(irq_handler_t timer_routine)
{
if (request_irq(IRQ_MAC_TIMER_1, via_timer_handler, IRQF_TIMER, "timer",
- timer_routine)) {
+ NULL)) {
pr_err("Couldn't register %s interrupt\n", "timer");
return;
}
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 490700aa2212..5dabbc915b8d 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -112,14 +112,13 @@ static u32 clk_total;
static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;
m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF;
clk_total += PCC_TIMER_CYCLES;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -129,7 +128,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
void mvme147_sched_init (irq_handler_t timer_routine)
{
if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQF_TIMER,
- "timer 1", timer_routine))
+ "timer 1", NULL))
pr_err("Couldn't register timer interrupt\n");
/* Init the clock with a value */
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 5b86d10e0f84..ae9bb7fda161 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -372,14 +372,13 @@ static u32 clk_total;
static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
out_8(PCCTIC1, in_8(PCCTIC1) | PCCTIC1_INT_CLR);
out_8(PCCTOVR1, PCCTOVR1_OVR_CLR);
clk_total += PCC_TIMER_CYCLES;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -396,7 +395,7 @@ void mvme16x_sched_init (irq_handler_t timer_routine)
out_8(PCCTOVR1, in_8(PCCTOVR1) | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
out_8(PCCTIC1, PCCTIC1_INT_EN | 6);
if (request_irq(MVME16x_IRQ_TIMER, mvme16x_timer_int, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
panic ("Couldn't register timer int");
clocksource_register_hz(&mvme16x_clk, PCC_TIMER_CLOCK_FREQ);
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index b01b545a2db0..4c6c409053fd 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -130,8 +130,6 @@ void q40_mksound(unsigned int hz, unsigned int ticks)
static irqreturn_t q40_timer_int(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
ql_ticks = ql_ticks ? 0 : 1;
if (sound_ticks) {
unsigned char sval=(sound_ticks & 1) ? 128-SVOL : 128+SVOL;
@@ -144,7 +142,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
unsigned long flags;
local_irq_save(flags);
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
}
@@ -157,7 +155,7 @@ void q40_sched_init (irq_handler_t timer_routine)
timer_irq = Q40_IRQ_FRAME;
- if (request_irq(timer_irq, q40_timer_int, 0, "timer", timer_routine))
+ if (request_irq(timer_irq, q40_timer_int, 0, "timer", NULL))
panic("Couldn't register timer int");
master_outb(-1, FRAME_CLEAR_REG);
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 12/15] m68k: change remaining timers to legacy_timer_tick
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
There are nine more machines that each have their own timer interrupt
calling the m68k timer_interrupt() function through an indirect pointer.
This function is now the same as legacy_timer_tick, so just call that
directly and select the corresponding Kconfig symbol.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/Kconfig.machine | 9 +++++++++
arch/m68k/amiga/config.c | 6 ++----
arch/m68k/apollo/config.c | 6 ++----
arch/m68k/atari/time.c | 5 ++---
arch/m68k/bvme6000/config.c | 5 ++---
arch/m68k/hp300/time.c | 5 ++---
arch/m68k/mac/via.c | 6 ++----
arch/m68k/mvme147/config.c | 5 ++---
arch/m68k/mvme16x/config.c | 5 ++---
arch/m68k/q40/q40ints.c | 6 ++----
10 files changed, 27 insertions(+), 31 deletions(-)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index e3c835440d9a..b47ac37484fa 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -7,6 +7,7 @@ config AMIGA
bool "Amiga support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
This option enables support for the Amiga series of computers. If
you plan to use this kernel on an Amiga, say Y here and browse the
@@ -17,6 +18,7 @@ config ATARI
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
+ select LEGACY_TIMER_TICK
help
This option enables support for the 68000-based Atari series of
computers (including the TT, Falcon and Medusa). If you plan to use
@@ -28,6 +30,7 @@ config MAC
depends on MMU
select MMU_MOTOROLA if MMU
select HAVE_ARCH_NVRAM_OPS
+ select LEGACY_TIMER_TICK
help
This option enables support for the Apple Macintosh series of
computers (yes, there is experimental support now, at least for part
@@ -40,6 +43,7 @@ config APOLLO
bool "Apollo support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
Say Y here if you want to run Linux on an MC680x0-based Apollo
Domain workstation such as the DN3500.
@@ -58,6 +62,7 @@ config MVME147
bool "MVME147 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for early Motorola VME boards. This will
build a kernel which can run on MVME147 single-board computers. If
@@ -68,6 +73,7 @@ config MVME16x
bool "MVME162, 166 and 167 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for Motorola VME boards. This will build a
kernel which can run on MVME162, MVME166, MVME167, MVME172, and
@@ -79,6 +85,7 @@ config BVME6000
bool "BVME4000 and BVME6000 support"
depends on MMU
depends on VME
+ select LEGACY_TIMER_TICK
help
Say Y to include support for VME boards from BVM Ltd. This will
build a kernel which can run on BVME4000 and BVME6000 boards. If
@@ -89,6 +96,7 @@ config HP300
bool "HP9000/300 and HP9000/400 support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
This option enables support for the HP9000/300 and HP9000/400 series
of workstations. Support for these machines is still somewhat
@@ -115,6 +123,7 @@ config Q40
bool "Q40/Q60 support"
depends on MMU
select MMU_MOTOROLA if MMU
+ select LEGACY_TIMER_TICK
help
The Q40 is a Motorola 68040-based successor to the Sinclair QL
manufactured in Germany. There is an official Q40 home page at
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 29f92333119e..91dc87b86411 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -475,11 +475,9 @@ static u32 clk_total, clk_offset;
static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
clk_total += jiffy_ticks;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
return IRQ_HANDLED;
@@ -504,7 +502,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
* SCSI code. We'll have to take a look at this later
*/
if (request_irq(IRQ_AMIGA_CIAB_TA, ciab_timer_handler, IRQF_TIMER,
- "timer", timer_routine))
+ "timer", NULL))
pr_err("Couldn't register timer interrupt\n");
/* start timer */
ciab.cra |= 0x11;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 30915f1a8760..17d59fa6b25b 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -168,11 +168,9 @@ void __init config_apollo(void)
irqreturn_t dn_timer_int(int irq, void *dev_id)
{
- irq_handler_t timer_handler = dev_id;
-
volatile unsigned char x;
- timer_handler(irq, dev_id);
+ legacy_timer_tick(1);
timer_heartbeat();
x = *(volatile unsigned char *)(apollo_timer + 3);
@@ -199,7 +197,7 @@ void dn_sched_init(irq_handler_t timer_routine)
*(volatile unsigned char *)(apollo_timer + 0x3));
#endif
- if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
+ if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", NULL))
pr_err("Couldn't register timer interrupt\n");
}
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index ce4a5961ca93..36d811ae09ee 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -41,7 +41,6 @@ static u8 last_timer_count;
static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
@@ -49,7 +48,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
last_timer_count = st_mfp.tim_dt_c;
} while (last_timer_count == 1);
clk_total += INT_TICKS;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
@@ -65,7 +64,7 @@ atari_sched_init(irq_handler_t timer_routine)
st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
/* install interrupt service routine for MFP Timer C */
if (request_irq(IRQ_MFP_TIMC, mfp_timer_c_handler, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
pr_err("Couldn't register timer interrupt\n");
clocksource_register_hz(&atari_clk, INT_CLK);
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 50f4d01363df..d3f5963021d3 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -165,7 +165,6 @@ static u32 clk_total, clk_offset;
static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
unsigned char msr;
@@ -175,7 +174,7 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
rtc->msr = msr | 0x20; /* Ack the interrupt */
clk_total += RTC_TIMER_CYCLES;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -198,7 +197,7 @@ void bvme6000_sched_init (irq_handler_t timer_routine)
rtc->msr = 0; /* Ensure timer registers accessible */
if (request_irq(BVME_IRQ_RTC, bvme6000_timer_int, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
panic ("Couldn't register timer int");
rtc->t1cr_omr = 0x04; /* Mode 2, ext clk */
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index e3cd938de0f9..011fc2e5a68a 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -55,7 +55,6 @@ static u32 clk_total, clk_offset;
static irqreturn_t hp300_tick(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
unsigned long tmp;
@@ -64,7 +63,7 @@ static irqreturn_t hp300_tick(int irq, void *dev_id)
asm volatile ("movpw %1@(5),%0" : "=d" (tmp) : "a" (CLOCKBASE));
clk_total += INTVAL;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
@@ -106,7 +105,7 @@ void __init hp300_sched_init(irq_handler_t vector)
asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
- if (request_irq(IRQ_AUTO_6, hp300_tick, IRQF_TIMER, "timer tick", vector))
+ if (request_irq(IRQ_AUTO_6, hp300_tick, IRQF_TIMER, "timer tick", NULL))
pr_err("Couldn't register timer interrupt\n");
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index ac77d73af19a..ba444e1774b8 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -602,11 +602,9 @@ static u32 clk_total, clk_offset;
static irqreturn_t via_timer_handler(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
clk_total += VIA_TIMER_CYCLES;
clk_offset = 0;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
return IRQ_HANDLED;
}
@@ -614,7 +612,7 @@ static irqreturn_t via_timer_handler(int irq, void *dev_id)
void __init via_init_clock(irq_handler_t timer_routine)
{
if (request_irq(IRQ_MAC_TIMER_1, via_timer_handler, IRQF_TIMER, "timer",
- timer_routine)) {
+ NULL)) {
pr_err("Couldn't register %s interrupt\n", "timer");
return;
}
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 490700aa2212..5dabbc915b8d 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -112,14 +112,13 @@ static u32 clk_total;
static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
m147_pcc->t1_int_cntrl = PCC_TIMER_INT_CLR;
m147_pcc->t1_cntrl = PCC_TIMER_CLR_OVF;
clk_total += PCC_TIMER_CYCLES;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -129,7 +128,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
void mvme147_sched_init (irq_handler_t timer_routine)
{
if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQF_TIMER,
- "timer 1", timer_routine))
+ "timer 1", NULL))
pr_err("Couldn't register timer interrupt\n");
/* Init the clock with a value */
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 5b86d10e0f84..ae9bb7fda161 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -372,14 +372,13 @@ static u32 clk_total;
static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
unsigned long flags;
local_irq_save(flags);
out_8(PCCTIC1, in_8(PCCTIC1) | PCCTIC1_INT_CLR);
out_8(PCCTOVR1, PCCTOVR1_OVR_CLR);
clk_total += PCC_TIMER_CYCLES;
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
local_irq_restore(flags);
return IRQ_HANDLED;
@@ -396,7 +395,7 @@ void mvme16x_sched_init (irq_handler_t timer_routine)
out_8(PCCTOVR1, in_8(PCCTOVR1) | PCCTOVR1_TIC_EN | PCCTOVR1_COC_EN);
out_8(PCCTIC1, PCCTIC1_INT_EN | 6);
if (request_irq(MVME16x_IRQ_TIMER, mvme16x_timer_int, IRQF_TIMER, "timer",
- timer_routine))
+ NULL))
panic ("Couldn't register timer int");
clocksource_register_hz(&mvme16x_clk, PCC_TIMER_CLOCK_FREQ);
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index b01b545a2db0..4c6c409053fd 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -130,8 +130,6 @@ void q40_mksound(unsigned int hz, unsigned int ticks)
static irqreturn_t q40_timer_int(int irq, void *dev_id)
{
- irq_handler_t timer_routine = dev_id;
-
ql_ticks = ql_ticks ? 0 : 1;
if (sound_ticks) {
unsigned char sval=(sound_ticks & 1) ? 128-SVOL : 128+SVOL;
@@ -144,7 +142,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
unsigned long flags;
local_irq_save(flags);
- timer_routine(0, NULL);
+ legacy_timer_tick(1);
timer_heartbeat();
local_irq_restore(flags);
}
@@ -157,7 +155,7 @@ void q40_sched_init (irq_handler_t timer_routine)
timer_irq = Q40_IRQ_FRAME;
- if (request_irq(timer_irq, q40_timer_int, 0, "timer", timer_routine))
+ if (request_irq(timer_irq, q40_timer_int, 0, "timer", NULL))
panic("Couldn't register timer int");
master_outb(-1, FRAME_CLEAR_REG);
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 13/15] m68k: remove timer_interrupt() function
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
This gets passed to a number of init functions, but is
ignored everywhere, so remove the function and change the
mach_sched_init callback to take no arguments.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/68000/timers.c | 2 +-
arch/m68k/amiga/config.c | 4 ++--
arch/m68k/apollo/config.c | 4 ++--
arch/m68k/atari/config.c | 2 +-
arch/m68k/atari/time.c | 2 +-
arch/m68k/bvme6000/config.c | 4 ++--
arch/m68k/coldfire/pit.c | 2 +-
arch/m68k/coldfire/sltimers.c | 2 +-
arch/m68k/coldfire/timers.c | 2 +-
arch/m68k/hp300/time.c | 2 +-
arch/m68k/hp300/time.h | 2 +-
arch/m68k/include/asm/machdep.h | 5 ++---
arch/m68k/kernel/setup_mm.c | 2 +-
arch/m68k/kernel/setup_no.c | 2 +-
arch/m68k/kernel/time.c | 15 +--------------
arch/m68k/mac/config.c | 6 +++---
arch/m68k/mac/via.c | 2 +-
arch/m68k/mvme147/config.c | 4 ++--
arch/m68k/mvme16x/config.c | 4 ++--
arch/m68k/q40/config.c | 2 +-
arch/m68k/q40/q40ints.c | 2 +-
arch/m68k/sun3/config.c | 4 ++--
arch/m68k/sun3x/time.c | 2 +-
arch/m68k/sun3x/time.h | 2 +-
24 files changed, 33 insertions(+), 47 deletions(-)
diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
index 3aa006f8e7ea..0d0417cebc7f 100644
--- a/arch/m68k/68000/timers.c
+++ b/arch/m68k/68000/timers.c
@@ -91,7 +91,7 @@ static struct clocksource m68328_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int ret;
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 91dc87b86411..50e9a2c6523e 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -92,7 +92,7 @@ static char *amiga_models[] __initdata = {
static char amiga_model_name[13] = "Amiga ";
-static void amiga_sched_init(irq_handler_t handler);
+static void amiga_sched_init(void);
static void amiga_get_model(char *model);
static void amiga_get_hardware_list(struct seq_file *m);
extern void amiga_mksound(unsigned int count, unsigned int ticks);
@@ -483,7 +483,7 @@ static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void __init amiga_sched_init(irq_handler_t timer_routine)
+static void __init amiga_sched_init(void)
{
static struct resource sched_res = {
.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 17d59fa6b25b..36c2cd97f228 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -26,7 +26,7 @@ u_long cpuctrl_physaddr;
u_long timer_physaddr;
u_long apollo_model;
-extern void dn_sched_init(irq_handler_t handler);
+extern void dn_sched_init(void);
extern void dn_init_IRQ(void);
extern int dn_dummy_hwclk(int, struct rtc_time *);
extern void dn_dummy_reset(void);
@@ -179,7 +179,7 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void dn_sched_init(irq_handler_t timer_routine)
+void dn_sched_init(void)
{
/* program timer 1 */
*(volatile unsigned char *)(apollo_timer + 3) = 0x01;
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 7ec3161e8517..50fda4bea521 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -77,7 +77,7 @@ static void atari_heartbeat(int on);
#endif
/* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irq_handler_t);
+extern void atari_sched_init(void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index 36d811ae09ee..1068670cb741 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -56,7 +56,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
}
void __init
-atari_sched_init(irq_handler_t timer_routine)
+atari_sched_init(void)
{
/* set Timer C data Register */
st_mfp.tim_dt_c = INT_TICKS;
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index d3f5963021d3..b37f8ce034e7 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -38,7 +38,7 @@
#include <asm/bvme6000hw.h>
static void bvme6000_get_model(char *model);
-extern void bvme6000_sched_init(irq_handler_t handler);
+extern void bvme6000_sched_init(void);
extern int bvme6000_hwclk (int, struct rtc_time *);
extern void bvme6000_reset (void);
void bvme6000_set_vectors (void);
@@ -189,7 +189,7 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
* so divide by 8 to get the microsecond result.
*/
-void bvme6000_sched_init (irq_handler_t timer_routine)
+void bvme6000_sched_init (void)
{
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
unsigned char msr = rtc->msr & 0xc0;
diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
index fd1d9c915daa..855d0af47097 100644
--- a/arch/m68k/coldfire/pit.c
+++ b/arch/m68k/coldfire/pit.c
@@ -136,7 +136,7 @@ static struct clocksource pit_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int ret;
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 25a1319f3cb8..f9d572ee63db 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -118,7 +118,7 @@ static struct clocksource mcfslt_clk = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int r;
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index 24b5e2d1b00b..05a42d8e0a59 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -107,7 +107,7 @@ static struct clocksource mcftmr_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int r;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index 011fc2e5a68a..1d1b7b3b5dd4 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -98,7 +98,7 @@ static u64 hp300_read_clk(struct clocksource *cs)
return ticks;
}
-void __init hp300_sched_init(irq_handler_t vector)
+void __init hp300_sched_init(void)
{
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
out_8(CLOCKBASE + CLKCR1, 0x1); /* reset */
diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h
index 1d77b55cc72a..040a098b7db1 100644
--- a/arch/m68k/hp300/time.h
+++ b/arch/m68k/hp300/time.h
@@ -1 +1 @@
-extern void hp300_sched_init(irq_handler_t vector);
+extern void hp300_sched_init(void);
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index e62a39d01ae4..7181ed43ba22 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -12,7 +12,7 @@ struct rtc_time;
struct rtc_pll_info;
struct buffer_head;
-extern void (*mach_sched_init) (irq_handler_t handler);
+extern void (*mach_sched_init) (void);
/* machine dependent irq functions */
extern void (*mach_init_IRQ) (void);
extern void (*mach_get_model) (char *model);
@@ -33,8 +33,7 @@ extern void (*mach_l2_flush) (int);
extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */
-extern void hw_timer_init(irq_handler_t handler);
-extern unsigned long hw_timer_offset(void);
+extern void hw_timer_init(void);
#ifdef CONFIG_HEARTBEAT
extern void timer_heartbeat(void);
#else
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index ab8aa7be260f..0628733bfb88 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -82,7 +82,7 @@ static struct m68k_mem_info m68k_ramdisk __initdata;
static char m68k_command_line[CL_SIZE] __initdata;
-void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
+void (*mach_sched_init) (void) __initdata = NULL;
/* machine dependent irq functions */
void (*mach_init_IRQ) (void) __initdata = NULL;
void (*mach_get_model) (char *model);
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index f66f4b1d062e..e377b4219528 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -49,7 +49,7 @@ EXPORT_SYMBOL(memory_end);
char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
-void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
+void (*mach_sched_init)(void) __initdata = NULL;
int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index c05cec21b05f..340ffeea0a9d 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -35,19 +35,6 @@
unsigned long (*mach_random_get_entropy)(void);
EXPORT_SYMBOL_GPL(mach_random_get_entropy);
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-static irqreturn_t timer_interrupt(int irq, void *dummy)
-{
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
- profile_tick(CPU_PROFILING);
- return IRQ_HANDLED;
-}
-
#ifdef CONFIG_HEARTBEAT
void timer_heartbeat(void)
{
@@ -157,5 +144,5 @@ module_init(rtc_init);
void __init time_init(void)
{
- mach_sched_init(timer_interrupt);
+ mach_sched_init();
}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 0ac53d87493c..0dbe0fedd826 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -58,7 +58,7 @@ extern int mac_hwclk(int, struct rtc_time *);
extern void iop_preinit(void);
extern void iop_init(void);
extern void via_init(void);
-extern void via_init_clock(irq_handler_t func);
+extern void via_init_clock(void);
extern void oss_init(void);
extern void psc_init(void);
extern void baboon_init(void);
@@ -69,9 +69,9 @@ static void mac_get_model(char *str);
static void mac_identify(void);
static void mac_report_hardware(void);
-static void __init mac_sched_init(irq_handler_t vector)
+static void __init mac_sched_init(void)
{
- via_init_clock(vector);
+ via_init_clock();
}
/*
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index ba444e1774b8..8ad734e3c934 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -609,7 +609,7 @@ static irqreturn_t via_timer_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void __init via_init_clock(irq_handler_t timer_routine)
+void __init via_init_clock(void)
{
if (request_irq(IRQ_MAC_TIMER_1, via_timer_handler, IRQF_TIMER, "timer",
NULL)) {
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 5dabbc915b8d..4fc43b5d7545 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,7 @@
static void mvme147_get_model(char *model);
-extern void mvme147_sched_init(irq_handler_t handler);
+extern void mvme147_sched_init(void);
extern int mvme147_hwclk (int, struct rtc_time *);
extern void mvme147_reset (void);
@@ -125,7 +125,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
}
-void mvme147_sched_init (irq_handler_t timer_routine)
+void mvme147_sched_init (void)
{
if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQF_TIMER,
"timer 1", NULL))
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index ae9bb7fda161..18e158887ec9 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -43,7 +43,7 @@ extern t_bdid mvme_bdid;
static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
static void mvme16x_get_model(char *model);
-extern void mvme16x_sched_init(irq_handler_t handler);
+extern void mvme16x_sched_init(void);
extern int mvme16x_hwclk (int, struct rtc_time *);
extern void mvme16x_reset (void);
@@ -384,7 +384,7 @@ static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
return IRQ_HANDLED;
}
-void mvme16x_sched_init (irq_handler_t timer_routine)
+void mvme16x_sched_init(void)
{
uint16_t brdno = be16_to_cpu(mvme_bdid.brdno);
int irq;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 4627de3c0603..55f76f0fa29b 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -37,7 +37,7 @@
extern void q40_init_IRQ(void);
static void q40_get_model(char *model);
-extern void q40_sched_init(irq_handler_t handler);
+extern void q40_sched_init(void);
static int q40_hwclk(int, struct rtc_time *);
static unsigned int q40_get_ss(void);
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 4c6c409053fd..6886a5d0007b 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -149,7 +149,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void q40_sched_init (irq_handler_t timer_routine)
+void q40_sched_init (void)
{
int timer_irq;
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 7204c0ea0dc7..f7dd47232b6c 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@
char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
-static void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(void);
extern void sun3_get_model (char* model);
extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -151,7 +151,7 @@ void __init config_sun3(void)
sun3_bootmem_alloc(memory_start, memory_end);
}
-static void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(void)
{
sun3_disable_interrupts();
intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index f6e25fdc008c..a2c97821faf2 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -90,7 +90,7 @@ static irqreturn_t sun3x_timer_tick(int irq, void *dev_id)
}
#endif
-void __init sun3x_sched_init(irq_handler_t vector)
+void __init sun3x_sched_init(void)
{
sun3_disable_interrupts();
diff --git a/arch/m68k/sun3x/time.h b/arch/m68k/sun3x/time.h
index 86ce78bb3c28..7cfff22e4986 100644
--- a/arch/m68k/sun3x/time.h
+++ b/arch/m68k/sun3x/time.h
@@ -3,7 +3,7 @@
#define SUN3X_TIME_H
extern int sun3x_hwclk(int set, struct rtc_time *t);
-void sun3x_sched_init(irq_handler_t vector);
+void sun3x_sched_init(void);
struct mostek_dt {
volatile unsigned char csr;
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 13/15] m68k: remove timer_interrupt() function
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
This gets passed to a number of init functions, but is
ignored everywhere, so remove the function and change the
mach_sched_init callback to take no arguments.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/68000/timers.c | 2 +-
arch/m68k/amiga/config.c | 4 ++--
arch/m68k/apollo/config.c | 4 ++--
arch/m68k/atari/config.c | 2 +-
arch/m68k/atari/time.c | 2 +-
arch/m68k/bvme6000/config.c | 4 ++--
arch/m68k/coldfire/pit.c | 2 +-
arch/m68k/coldfire/sltimers.c | 2 +-
arch/m68k/coldfire/timers.c | 2 +-
arch/m68k/hp300/time.c | 2 +-
arch/m68k/hp300/time.h | 2 +-
arch/m68k/include/asm/machdep.h | 5 ++---
arch/m68k/kernel/setup_mm.c | 2 +-
arch/m68k/kernel/setup_no.c | 2 +-
arch/m68k/kernel/time.c | 15 +--------------
arch/m68k/mac/config.c | 6 +++---
arch/m68k/mac/via.c | 2 +-
arch/m68k/mvme147/config.c | 4 ++--
arch/m68k/mvme16x/config.c | 4 ++--
arch/m68k/q40/config.c | 2 +-
arch/m68k/q40/q40ints.c | 2 +-
arch/m68k/sun3/config.c | 4 ++--
arch/m68k/sun3x/time.c | 2 +-
arch/m68k/sun3x/time.h | 2 +-
24 files changed, 33 insertions(+), 47 deletions(-)
diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
index 3aa006f8e7ea..0d0417cebc7f 100644
--- a/arch/m68k/68000/timers.c
+++ b/arch/m68k/68000/timers.c
@@ -91,7 +91,7 @@ static struct clocksource m68328_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int ret;
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 91dc87b86411..50e9a2c6523e 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -92,7 +92,7 @@ static char *amiga_models[] __initdata = {
static char amiga_model_name[13] = "Amiga ";
-static void amiga_sched_init(irq_handler_t handler);
+static void amiga_sched_init(void);
static void amiga_get_model(char *model);
static void amiga_get_hardware_list(struct seq_file *m);
extern void amiga_mksound(unsigned int count, unsigned int ticks);
@@ -483,7 +483,7 @@ static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void __init amiga_sched_init(irq_handler_t timer_routine)
+static void __init amiga_sched_init(void)
{
static struct resource sched_res = {
.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 17d59fa6b25b..36c2cd97f228 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -26,7 +26,7 @@ u_long cpuctrl_physaddr;
u_long timer_physaddr;
u_long apollo_model;
-extern void dn_sched_init(irq_handler_t handler);
+extern void dn_sched_init(void);
extern void dn_init_IRQ(void);
extern int dn_dummy_hwclk(int, struct rtc_time *);
extern void dn_dummy_reset(void);
@@ -179,7 +179,7 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void dn_sched_init(irq_handler_t timer_routine)
+void dn_sched_init(void)
{
/* program timer 1 */
*(volatile unsigned char *)(apollo_timer + 3) = 0x01;
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 7ec3161e8517..50fda4bea521 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -77,7 +77,7 @@ static void atari_heartbeat(int on);
#endif
/* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irq_handler_t);
+extern void atari_sched_init(void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index 36d811ae09ee..1068670cb741 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -56,7 +56,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
}
void __init
-atari_sched_init(irq_handler_t timer_routine)
+atari_sched_init(void)
{
/* set Timer C data Register */
st_mfp.tim_dt_c = INT_TICKS;
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index d3f5963021d3..b37f8ce034e7 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -38,7 +38,7 @@
#include <asm/bvme6000hw.h>
static void bvme6000_get_model(char *model);
-extern void bvme6000_sched_init(irq_handler_t handler);
+extern void bvme6000_sched_init(void);
extern int bvme6000_hwclk (int, struct rtc_time *);
extern void bvme6000_reset (void);
void bvme6000_set_vectors (void);
@@ -189,7 +189,7 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
* so divide by 8 to get the microsecond result.
*/
-void bvme6000_sched_init (irq_handler_t timer_routine)
+void bvme6000_sched_init (void)
{
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
unsigned char msr = rtc->msr & 0xc0;
diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
index fd1d9c915daa..855d0af47097 100644
--- a/arch/m68k/coldfire/pit.c
+++ b/arch/m68k/coldfire/pit.c
@@ -136,7 +136,7 @@ static struct clocksource pit_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int ret;
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 25a1319f3cb8..f9d572ee63db 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -118,7 +118,7 @@ static struct clocksource mcfslt_clk = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int r;
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index 24b5e2d1b00b..05a42d8e0a59 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -107,7 +107,7 @@ static struct clocksource mcftmr_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int r;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index 011fc2e5a68a..1d1b7b3b5dd4 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -98,7 +98,7 @@ static u64 hp300_read_clk(struct clocksource *cs)
return ticks;
}
-void __init hp300_sched_init(irq_handler_t vector)
+void __init hp300_sched_init(void)
{
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
out_8(CLOCKBASE + CLKCR1, 0x1); /* reset */
diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h
index 1d77b55cc72a..040a098b7db1 100644
--- a/arch/m68k/hp300/time.h
+++ b/arch/m68k/hp300/time.h
@@ -1 +1 @@
-extern void hp300_sched_init(irq_handler_t vector);
+extern void hp300_sched_init(void);
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index e62a39d01ae4..7181ed43ba22 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -12,7 +12,7 @@ struct rtc_time;
struct rtc_pll_info;
struct buffer_head;
-extern void (*mach_sched_init) (irq_handler_t handler);
+extern void (*mach_sched_init) (void);
/* machine dependent irq functions */
extern void (*mach_init_IRQ) (void);
extern void (*mach_get_model) (char *model);
@@ -33,8 +33,7 @@ extern void (*mach_l2_flush) (int);
extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */
-extern void hw_timer_init(irq_handler_t handler);
-extern unsigned long hw_timer_offset(void);
+extern void hw_timer_init(void);
#ifdef CONFIG_HEARTBEAT
extern void timer_heartbeat(void);
#else
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index ab8aa7be260f..0628733bfb88 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -82,7 +82,7 @@ static struct m68k_mem_info m68k_ramdisk __initdata;
static char m68k_command_line[CL_SIZE] __initdata;
-void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
+void (*mach_sched_init) (void) __initdata = NULL;
/* machine dependent irq functions */
void (*mach_init_IRQ) (void) __initdata = NULL;
void (*mach_get_model) (char *model);
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index f66f4b1d062e..e377b4219528 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -49,7 +49,7 @@ EXPORT_SYMBOL(memory_end);
char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
-void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
+void (*mach_sched_init)(void) __initdata = NULL;
int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index c05cec21b05f..340ffeea0a9d 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -35,19 +35,6 @@
unsigned long (*mach_random_get_entropy)(void);
EXPORT_SYMBOL_GPL(mach_random_get_entropy);
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-static irqreturn_t timer_interrupt(int irq, void *dummy)
-{
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
- profile_tick(CPU_PROFILING);
- return IRQ_HANDLED;
-}
-
#ifdef CONFIG_HEARTBEAT
void timer_heartbeat(void)
{
@@ -157,5 +144,5 @@ module_init(rtc_init);
void __init time_init(void)
{
- mach_sched_init(timer_interrupt);
+ mach_sched_init();
}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 0ac53d87493c..0dbe0fedd826 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -58,7 +58,7 @@ extern int mac_hwclk(int, struct rtc_time *);
extern void iop_preinit(void);
extern void iop_init(void);
extern void via_init(void);
-extern void via_init_clock(irq_handler_t func);
+extern void via_init_clock(void);
extern void oss_init(void);
extern void psc_init(void);
extern void baboon_init(void);
@@ -69,9 +69,9 @@ static void mac_get_model(char *str);
static void mac_identify(void);
static void mac_report_hardware(void);
-static void __init mac_sched_init(irq_handler_t vector)
+static void __init mac_sched_init(void)
{
- via_init_clock(vector);
+ via_init_clock();
}
/*
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index ba444e1774b8..8ad734e3c934 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -609,7 +609,7 @@ static irqreturn_t via_timer_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void __init via_init_clock(irq_handler_t timer_routine)
+void __init via_init_clock(void)
{
if (request_irq(IRQ_MAC_TIMER_1, via_timer_handler, IRQF_TIMER, "timer",
NULL)) {
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 5dabbc915b8d..4fc43b5d7545 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,7 @@
static void mvme147_get_model(char *model);
-extern void mvme147_sched_init(irq_handler_t handler);
+extern void mvme147_sched_init(void);
extern int mvme147_hwclk (int, struct rtc_time *);
extern void mvme147_reset (void);
@@ -125,7 +125,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
}
-void mvme147_sched_init (irq_handler_t timer_routine)
+void mvme147_sched_init (void)
{
if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQF_TIMER,
"timer 1", NULL))
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index ae9bb7fda161..18e158887ec9 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -43,7 +43,7 @@ extern t_bdid mvme_bdid;
static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
static void mvme16x_get_model(char *model);
-extern void mvme16x_sched_init(irq_handler_t handler);
+extern void mvme16x_sched_init(void);
extern int mvme16x_hwclk (int, struct rtc_time *);
extern void mvme16x_reset (void);
@@ -384,7 +384,7 @@ static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
return IRQ_HANDLED;
}
-void mvme16x_sched_init (irq_handler_t timer_routine)
+void mvme16x_sched_init(void)
{
uint16_t brdno = be16_to_cpu(mvme_bdid.brdno);
int irq;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 4627de3c0603..55f76f0fa29b 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -37,7 +37,7 @@
extern void q40_init_IRQ(void);
static void q40_get_model(char *model);
-extern void q40_sched_init(irq_handler_t handler);
+extern void q40_sched_init(void);
static int q40_hwclk(int, struct rtc_time *);
static unsigned int q40_get_ss(void);
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 4c6c409053fd..6886a5d0007b 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -149,7 +149,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void q40_sched_init (irq_handler_t timer_routine)
+void q40_sched_init (void)
{
int timer_irq;
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 7204c0ea0dc7..f7dd47232b6c 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@
char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
-static void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(void);
extern void sun3_get_model (char* model);
extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -151,7 +151,7 @@ void __init config_sun3(void)
sun3_bootmem_alloc(memory_start, memory_end);
}
-static void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(void)
{
sun3_disable_interrupts();
intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index f6e25fdc008c..a2c97821faf2 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -90,7 +90,7 @@ static irqreturn_t sun3x_timer_tick(int irq, void *dev_id)
}
#endif
-void __init sun3x_sched_init(irq_handler_t vector)
+void __init sun3x_sched_init(void)
{
sun3_disable_interrupts();
diff --git a/arch/m68k/sun3x/time.h b/arch/m68k/sun3x/time.h
index 86ce78bb3c28..7cfff22e4986 100644
--- a/arch/m68k/sun3x/time.h
+++ b/arch/m68k/sun3x/time.h
@@ -3,7 +3,7 @@
#define SUN3X_TIME_H
extern int sun3x_hwclk(int set, struct rtc_time *t);
-void sun3x_sched_init(irq_handler_t vector);
+void sun3x_sched_init(void);
struct mostek_dt {
volatile unsigned char csr;
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 13/15] m68k: remove timer_interrupt() function
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
This gets passed to a number of init functions, but is
ignored everywhere, so remove the function and change the
mach_sched_init callback to take no arguments.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/m68k/68000/timers.c | 2 +-
arch/m68k/amiga/config.c | 4 ++--
arch/m68k/apollo/config.c | 4 ++--
arch/m68k/atari/config.c | 2 +-
arch/m68k/atari/time.c | 2 +-
arch/m68k/bvme6000/config.c | 4 ++--
arch/m68k/coldfire/pit.c | 2 +-
arch/m68k/coldfire/sltimers.c | 2 +-
arch/m68k/coldfire/timers.c | 2 +-
arch/m68k/hp300/time.c | 2 +-
arch/m68k/hp300/time.h | 2 +-
arch/m68k/include/asm/machdep.h | 5 ++---
arch/m68k/kernel/setup_mm.c | 2 +-
arch/m68k/kernel/setup_no.c | 2 +-
arch/m68k/kernel/time.c | 15 +--------------
arch/m68k/mac/config.c | 6 +++---
arch/m68k/mac/via.c | 2 +-
arch/m68k/mvme147/config.c | 4 ++--
arch/m68k/mvme16x/config.c | 4 ++--
arch/m68k/q40/config.c | 2 +-
arch/m68k/q40/q40ints.c | 2 +-
arch/m68k/sun3/config.c | 4 ++--
arch/m68k/sun3x/time.c | 2 +-
arch/m68k/sun3x/time.h | 2 +-
24 files changed, 33 insertions(+), 47 deletions(-)
diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
index 3aa006f8e7ea..0d0417cebc7f 100644
--- a/arch/m68k/68000/timers.c
+++ b/arch/m68k/68000/timers.c
@@ -91,7 +91,7 @@ static struct clocksource m68328_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int ret;
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 91dc87b86411..50e9a2c6523e 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -92,7 +92,7 @@ static char *amiga_models[] __initdata = {
static char amiga_model_name[13] = "Amiga ";
-static void amiga_sched_init(irq_handler_t handler);
+static void amiga_sched_init(void);
static void amiga_get_model(char *model);
static void amiga_get_hardware_list(struct seq_file *m);
extern void amiga_mksound(unsigned int count, unsigned int ticks);
@@ -483,7 +483,7 @@ static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void __init amiga_sched_init(irq_handler_t timer_routine)
+static void __init amiga_sched_init(void)
{
static struct resource sched_res = {
.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 17d59fa6b25b..36c2cd97f228 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -26,7 +26,7 @@ u_long cpuctrl_physaddr;
u_long timer_physaddr;
u_long apollo_model;
-extern void dn_sched_init(irq_handler_t handler);
+extern void dn_sched_init(void);
extern void dn_init_IRQ(void);
extern int dn_dummy_hwclk(int, struct rtc_time *);
extern void dn_dummy_reset(void);
@@ -179,7 +179,7 @@ irqreturn_t dn_timer_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void dn_sched_init(irq_handler_t timer_routine)
+void dn_sched_init(void)
{
/* program timer 1 */
*(volatile unsigned char *)(apollo_timer + 3) = 0x01;
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 7ec3161e8517..50fda4bea521 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -77,7 +77,7 @@ static void atari_heartbeat(int on);
#endif
/* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irq_handler_t);
+extern void atari_sched_init(void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index 36d811ae09ee..1068670cb741 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -56,7 +56,7 @@ static irqreturn_t mfp_timer_c_handler(int irq, void *dev_id)
}
void __init
-atari_sched_init(irq_handler_t timer_routine)
+atari_sched_init(void)
{
/* set Timer C data Register */
st_mfp.tim_dt_c = INT_TICKS;
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index d3f5963021d3..b37f8ce034e7 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -38,7 +38,7 @@
#include <asm/bvme6000hw.h>
static void bvme6000_get_model(char *model);
-extern void bvme6000_sched_init(irq_handler_t handler);
+extern void bvme6000_sched_init(void);
extern int bvme6000_hwclk (int, struct rtc_time *);
extern void bvme6000_reset (void);
void bvme6000_set_vectors (void);
@@ -189,7 +189,7 @@ static irqreturn_t bvme6000_timer_int (int irq, void *dev_id)
* so divide by 8 to get the microsecond result.
*/
-void bvme6000_sched_init (irq_handler_t timer_routine)
+void bvme6000_sched_init (void)
{
volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
unsigned char msr = rtc->msr & 0xc0;
diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
index fd1d9c915daa..855d0af47097 100644
--- a/arch/m68k/coldfire/pit.c
+++ b/arch/m68k/coldfire/pit.c
@@ -136,7 +136,7 @@ static struct clocksource pit_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int ret;
diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
index 25a1319f3cb8..f9d572ee63db 100644
--- a/arch/m68k/coldfire/sltimers.c
+++ b/arch/m68k/coldfire/sltimers.c
@@ -118,7 +118,7 @@ static struct clocksource mcfslt_clk = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int r;
diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
index 24b5e2d1b00b..05a42d8e0a59 100644
--- a/arch/m68k/coldfire/timers.c
+++ b/arch/m68k/coldfire/timers.c
@@ -107,7 +107,7 @@ static struct clocksource mcftmr_clk = {
/***************************************************************************/
-void hw_timer_init(irq_handler_t handler)
+void hw_timer_init(void)
{
int r;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index 011fc2e5a68a..1d1b7b3b5dd4 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -98,7 +98,7 @@ static u64 hp300_read_clk(struct clocksource *cs)
return ticks;
}
-void __init hp300_sched_init(irq_handler_t vector)
+void __init hp300_sched_init(void)
{
out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */
out_8(CLOCKBASE + CLKCR1, 0x1); /* reset */
diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h
index 1d77b55cc72a..040a098b7db1 100644
--- a/arch/m68k/hp300/time.h
+++ b/arch/m68k/hp300/time.h
@@ -1 +1 @@
-extern void hp300_sched_init(irq_handler_t vector);
+extern void hp300_sched_init(void);
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index e62a39d01ae4..7181ed43ba22 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -12,7 +12,7 @@ struct rtc_time;
struct rtc_pll_info;
struct buffer_head;
-extern void (*mach_sched_init) (irq_handler_t handler);
+extern void (*mach_sched_init) (void);
/* machine dependent irq functions */
extern void (*mach_init_IRQ) (void);
extern void (*mach_get_model) (char *model);
@@ -33,8 +33,7 @@ extern void (*mach_l2_flush) (int);
extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */
-extern void hw_timer_init(irq_handler_t handler);
-extern unsigned long hw_timer_offset(void);
+extern void hw_timer_init(void);
#ifdef CONFIG_HEARTBEAT
extern void timer_heartbeat(void);
#else
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index ab8aa7be260f..0628733bfb88 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -82,7 +82,7 @@ static struct m68k_mem_info m68k_ramdisk __initdata;
static char m68k_command_line[CL_SIZE] __initdata;
-void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
+void (*mach_sched_init) (void) __initdata = NULL;
/* machine dependent irq functions */
void (*mach_init_IRQ) (void) __initdata = NULL;
void (*mach_get_model) (char *model);
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index f66f4b1d062e..e377b4219528 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -49,7 +49,7 @@ EXPORT_SYMBOL(memory_end);
char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
-void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
+void (*mach_sched_init)(void) __initdata = NULL;
int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index c05cec21b05f..340ffeea0a9d 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -35,19 +35,6 @@
unsigned long (*mach_random_get_entropy)(void);
EXPORT_SYMBOL_GPL(mach_random_get_entropy);
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-static irqreturn_t timer_interrupt(int irq, void *dummy)
-{
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
- profile_tick(CPU_PROFILING);
- return IRQ_HANDLED;
-}
-
#ifdef CONFIG_HEARTBEAT
void timer_heartbeat(void)
{
@@ -157,5 +144,5 @@ module_init(rtc_init);
void __init time_init(void)
{
- mach_sched_init(timer_interrupt);
+ mach_sched_init();
}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 0ac53d87493c..0dbe0fedd826 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -58,7 +58,7 @@ extern int mac_hwclk(int, struct rtc_time *);
extern void iop_preinit(void);
extern void iop_init(void);
extern void via_init(void);
-extern void via_init_clock(irq_handler_t func);
+extern void via_init_clock(void);
extern void oss_init(void);
extern void psc_init(void);
extern void baboon_init(void);
@@ -69,9 +69,9 @@ static void mac_get_model(char *str);
static void mac_identify(void);
static void mac_report_hardware(void);
-static void __init mac_sched_init(irq_handler_t vector)
+static void __init mac_sched_init(void)
{
- via_init_clock(vector);
+ via_init_clock();
}
/*
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index ba444e1774b8..8ad734e3c934 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -609,7 +609,7 @@ static irqreturn_t via_timer_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void __init via_init_clock(irq_handler_t timer_routine)
+void __init via_init_clock(void)
{
if (request_irq(IRQ_MAC_TIMER_1, via_timer_handler, IRQF_TIMER, "timer",
NULL)) {
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 5dabbc915b8d..4fc43b5d7545 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,7 @@
static void mvme147_get_model(char *model);
-extern void mvme147_sched_init(irq_handler_t handler);
+extern void mvme147_sched_init(void);
extern int mvme147_hwclk (int, struct rtc_time *);
extern void mvme147_reset (void);
@@ -125,7 +125,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
}
-void mvme147_sched_init (irq_handler_t timer_routine)
+void mvme147_sched_init (void)
{
if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQF_TIMER,
"timer 1", NULL))
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index ae9bb7fda161..18e158887ec9 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -43,7 +43,7 @@ extern t_bdid mvme_bdid;
static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
static void mvme16x_get_model(char *model);
-extern void mvme16x_sched_init(irq_handler_t handler);
+extern void mvme16x_sched_init(void);
extern int mvme16x_hwclk (int, struct rtc_time *);
extern void mvme16x_reset (void);
@@ -384,7 +384,7 @@ static irqreturn_t mvme16x_timer_int (int irq, void *dev_id)
return IRQ_HANDLED;
}
-void mvme16x_sched_init (irq_handler_t timer_routine)
+void mvme16x_sched_init(void)
{
uint16_t brdno = be16_to_cpu(mvme_bdid.brdno);
int irq;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 4627de3c0603..55f76f0fa29b 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -37,7 +37,7 @@
extern void q40_init_IRQ(void);
static void q40_get_model(char *model);
-extern void q40_sched_init(irq_handler_t handler);
+extern void q40_sched_init(void);
static int q40_hwclk(int, struct rtc_time *);
static unsigned int q40_get_ss(void);
diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c
index 4c6c409053fd..6886a5d0007b 100644
--- a/arch/m68k/q40/q40ints.c
+++ b/arch/m68k/q40/q40ints.c
@@ -149,7 +149,7 @@ static irqreturn_t q40_timer_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
-void q40_sched_init (irq_handler_t timer_routine)
+void q40_sched_init (void)
{
int timer_irq;
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 7204c0ea0dc7..f7dd47232b6c 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@
char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
-static void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(void);
extern void sun3_get_model (char* model);
extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -151,7 +151,7 @@ void __init config_sun3(void)
sun3_bootmem_alloc(memory_start, memory_end);
}
-static void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(void)
{
sun3_disable_interrupts();
intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index f6e25fdc008c..a2c97821faf2 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -90,7 +90,7 @@ static irqreturn_t sun3x_timer_tick(int irq, void *dev_id)
}
#endif
-void __init sun3x_sched_init(irq_handler_t vector)
+void __init sun3x_sched_init(void)
{
sun3_disable_interrupts();
diff --git a/arch/m68k/sun3x/time.h b/arch/m68k/sun3x/time.h
index 86ce78bb3c28..7cfff22e4986 100644
--- a/arch/m68k/sun3x/time.h
+++ b/arch/m68k/sun3x/time.h
@@ -3,7 +3,7 @@
#define SUN3X_TIME_H
extern int sun3x_hwclk(int set, struct rtc_time *t);
-void sun3x_sched_init(irq_handler_t vector);
+void sun3x_sched_init(void);
struct mostek_dt {
volatile unsigned char csr;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 14/15] timekeeping: remove xtime_update
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
There are no more users of xtime_update aside from legacy_timer_tick(),
so fold it into that function and remove the declaration.
update_process_times() is now only called inside of the kernel/time/
code, so the declaration can be moved there.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
include/linux/timekeeping.h | 2 --
kernel/time/tick-legacy.c | 22 ++++++++++++++++++++--
kernel/time/timekeeping.c | 16 ----------------
kernel/time/timekeeping.h | 1 +
4 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 3670cb1670ff..d47009611109 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -10,8 +10,6 @@ void timekeeping_init(void);
extern int timekeeping_suspended;
/* Architecture timer tick functions: */
-extern void update_process_times(int user);
-extern void xtime_update(unsigned long ticks);
extern void legacy_timer_tick(unsigned long ticks);
/*
diff --git a/kernel/time/tick-legacy.c b/kernel/time/tick-legacy.c
index 73c5a0af4743..af225b32f5b3 100644
--- a/kernel/time/tick-legacy.c
+++ b/kernel/time/tick-legacy.c
@@ -10,10 +10,28 @@
#include "tick-internal.h"
+/**
+ * legacy_timer_tick() - advances the timekeeping infrastructure
+ * @ticks: number of ticks, that have elapsed since the last call.
+ *
+ * This is used by platforms that have not been converted to
+ * generic clockevents.
+ *
+ * If 'ticks' is zero, the CPU is not handling timekeeping, so
+ * only perform process accounting and profiling.
+ *
+ * Must be called with interrupts disabled.
+ */
void legacy_timer_tick(unsigned long ticks)
{
- if (ticks)
- xtime_update(ticks);
+ if (ticks) {
+ raw_spin_lock(&jiffies_lock);
+ write_seqcount_begin(&jiffies_seq);
+ do_timer(ticks);
+ write_seqcount_end(&jiffies_seq);
+ raw_spin_unlock(&jiffies_lock);
+ update_wall_time();
+ }
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 52fff7e9edcd..daa0ff017819 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -2438,19 +2438,3 @@ void hardpps(const struct timespec64 *phase_ts, const struct timespec64 *raw_ts)
}
EXPORT_SYMBOL(hardpps);
#endif /* CONFIG_NTP_PPS */
-
-/**
- * xtime_update() - advances the timekeeping infrastructure
- * @ticks: number of ticks, that have elapsed since the last call.
- *
- * Must be called with interrupts disabled.
- */
-void xtime_update(unsigned long ticks)
-{
- raw_spin_lock(&jiffies_lock);
- write_seqcount_begin(&jiffies_seq);
- do_timer(ticks);
- write_seqcount_end(&jiffies_seq);
- raw_spin_unlock(&jiffies_lock);
- update_wall_time();
-}
diff --git a/kernel/time/timekeeping.h b/kernel/time/timekeeping.h
index 099737f6f10c..d94b69c5b869 100644
--- a/kernel/time/timekeeping.h
+++ b/kernel/time/timekeeping.h
@@ -22,6 +22,7 @@ static inline int sched_clock_suspend(void) { return 0; }
static inline void sched_clock_resume(void) { }
#endif
+extern void update_process_times(int user);
extern void do_timer(unsigned long ticks);
extern void update_wall_time(void);
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 14/15] timekeeping: remove xtime_update
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
There are no more users of xtime_update aside from legacy_timer_tick(),
so fold it into that function and remove the declaration.
update_process_times() is now only called inside of the kernel/time/
code, so the declaration can be moved there.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
include/linux/timekeeping.h | 2 --
kernel/time/tick-legacy.c | 22 ++++++++++++++++++++--
kernel/time/timekeeping.c | 16 ----------------
kernel/time/timekeeping.h | 1 +
4 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 3670cb1670ff..d47009611109 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -10,8 +10,6 @@ void timekeeping_init(void);
extern int timekeeping_suspended;
/* Architecture timer tick functions: */
-extern void update_process_times(int user);
-extern void xtime_update(unsigned long ticks);
extern void legacy_timer_tick(unsigned long ticks);
/*
diff --git a/kernel/time/tick-legacy.c b/kernel/time/tick-legacy.c
index 73c5a0af4743..af225b32f5b3 100644
--- a/kernel/time/tick-legacy.c
+++ b/kernel/time/tick-legacy.c
@@ -10,10 +10,28 @@
#include "tick-internal.h"
+/**
+ * legacy_timer_tick() - advances the timekeeping infrastructure
+ * @ticks: number of ticks, that have elapsed since the last call.
+ *
+ * This is used by platforms that have not been converted to
+ * generic clockevents.
+ *
+ * If 'ticks' is zero, the CPU is not handling timekeeping, so
+ * only perform process accounting and profiling.
+ *
+ * Must be called with interrupts disabled.
+ */
void legacy_timer_tick(unsigned long ticks)
{
- if (ticks)
- xtime_update(ticks);
+ if (ticks) {
+ raw_spin_lock(&jiffies_lock);
+ write_seqcount_begin(&jiffies_seq);
+ do_timer(ticks);
+ write_seqcount_end(&jiffies_seq);
+ raw_spin_unlock(&jiffies_lock);
+ update_wall_time();
+ }
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 52fff7e9edcd..daa0ff017819 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -2438,19 +2438,3 @@ void hardpps(const struct timespec64 *phase_ts, const struct timespec64 *raw_ts)
}
EXPORT_SYMBOL(hardpps);
#endif /* CONFIG_NTP_PPS */
-
-/**
- * xtime_update() - advances the timekeeping infrastructure
- * @ticks: number of ticks, that have elapsed since the last call.
- *
- * Must be called with interrupts disabled.
- */
-void xtime_update(unsigned long ticks)
-{
- raw_spin_lock(&jiffies_lock);
- write_seqcount_begin(&jiffies_seq);
- do_timer(ticks);
- write_seqcount_end(&jiffies_seq);
- raw_spin_unlock(&jiffies_lock);
- update_wall_time();
-}
diff --git a/kernel/time/timekeeping.h b/kernel/time/timekeeping.h
index 099737f6f10c..d94b69c5b869 100644
--- a/kernel/time/timekeeping.h
+++ b/kernel/time/timekeeping.h
@@ -22,6 +22,7 @@ static inline int sched_clock_suspend(void) { return 0; }
static inline void sched_clock_resume(void) { }
#endif
+extern void update_process_times(int user);
extern void do_timer(unsigned long ticks);
extern void update_wall_time(void);
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 14/15] timekeeping: remove xtime_update
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
There are no more users of xtime_update aside from legacy_timer_tick(),
so fold it into that function and remove the declaration.
update_process_times() is now only called inside of the kernel/time/
code, so the declaration can be moved there.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
include/linux/timekeeping.h | 2 --
kernel/time/tick-legacy.c | 22 ++++++++++++++++++++--
kernel/time/timekeeping.c | 16 ----------------
kernel/time/timekeeping.h | 1 +
4 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h
index 3670cb1670ff..d47009611109 100644
--- a/include/linux/timekeeping.h
+++ b/include/linux/timekeeping.h
@@ -10,8 +10,6 @@ void timekeeping_init(void);
extern int timekeeping_suspended;
/* Architecture timer tick functions: */
-extern void update_process_times(int user);
-extern void xtime_update(unsigned long ticks);
extern void legacy_timer_tick(unsigned long ticks);
/*
diff --git a/kernel/time/tick-legacy.c b/kernel/time/tick-legacy.c
index 73c5a0af4743..af225b32f5b3 100644
--- a/kernel/time/tick-legacy.c
+++ b/kernel/time/tick-legacy.c
@@ -10,10 +10,28 @@
#include "tick-internal.h"
+/**
+ * legacy_timer_tick() - advances the timekeeping infrastructure
+ * @ticks: number of ticks, that have elapsed since the last call.
+ *
+ * This is used by platforms that have not been converted to
+ * generic clockevents.
+ *
+ * If 'ticks' is zero, the CPU is not handling timekeeping, so
+ * only perform process accounting and profiling.
+ *
+ * Must be called with interrupts disabled.
+ */
void legacy_timer_tick(unsigned long ticks)
{
- if (ticks)
- xtime_update(ticks);
+ if (ticks) {
+ raw_spin_lock(&jiffies_lock);
+ write_seqcount_begin(&jiffies_seq);
+ do_timer(ticks);
+ write_seqcount_end(&jiffies_seq);
+ raw_spin_unlock(&jiffies_lock);
+ update_wall_time();
+ }
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
}
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 52fff7e9edcd..daa0ff017819 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -2438,19 +2438,3 @@ void hardpps(const struct timespec64 *phase_ts, const struct timespec64 *raw_ts)
}
EXPORT_SYMBOL(hardpps);
#endif /* CONFIG_NTP_PPS */
-
-/**
- * xtime_update() - advances the timekeeping infrastructure
- * @ticks: number of ticks, that have elapsed since the last call.
- *
- * Must be called with interrupts disabled.
- */
-void xtime_update(unsigned long ticks)
-{
- raw_spin_lock(&jiffies_lock);
- write_seqcount_begin(&jiffies_seq);
- do_timer(ticks);
- write_seqcount_end(&jiffies_seq);
- raw_spin_unlock(&jiffies_lock);
- update_wall_time();
-}
diff --git a/kernel/time/timekeeping.h b/kernel/time/timekeeping.h
index 099737f6f10c..d94b69c5b869 100644
--- a/kernel/time/timekeeping.h
+++ b/kernel/time/timekeeping.h
@@ -22,6 +22,7 @@ static inline int sched_clock_suspend(void) { return 0; }
static inline void sched_clock_resume(void) { }
#endif
+extern void update_process_times(int user);
extern void do_timer(unsigned long ticks);
extern void update_wall_time(void);
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* [PATCH v2 15/15] timekeeping: default GENERIC_CLOCKEVENTS to enabled
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-10-30 15:17 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../features/time/clockevents/arch-support.txt | 6 +++---
arch/alpha/Kconfig | 1 -
arch/arc/Kconfig | 1 -
arch/arm/Kconfig | 12 ------------
arch/arm64/Kconfig | 1 -
arch/arm64/Kconfig.platforms | 1 -
arch/c6x/Kconfig | 1 -
arch/csky/Kconfig | 1 -
arch/h8300/Kconfig | 1 -
arch/hexagon/Kconfig | 1 -
arch/m68k/Kconfig.cpu | 1 -
arch/microblaze/Kconfig | 1 -
arch/mips/Kconfig | 1 -
arch/nds32/Kconfig | 1 -
arch/nios2/Kconfig | 1 -
arch/openrisc/Kconfig | 1 -
arch/powerpc/Kconfig | 1 -
arch/riscv/Kconfig | 1 -
arch/s390/Kconfig | 1 -
arch/sh/Kconfig | 1 -
arch/sparc/Kconfig | 1 -
arch/um/Kconfig | 1 -
arch/x86/Kconfig | 1 -
arch/xtensa/Kconfig | 1 -
kernel/time/Kconfig | 2 +-
25 files changed, 4 insertions(+), 38 deletions(-)
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index 61a5c9d68c15..6863a3fbddad 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -1,6 +1,6 @@
#
# Feature name: clockevents
-# Kconfig: GENERIC_CLOCKEVENTS
+# Kconfig: !LEGACY_TIMER_TICK
# description: arch support generic clock events
#
-----------------------
@@ -8,14 +8,14 @@
-----------------------
| alpha: | ok |
| arc: | ok |
- | arm: | ok |
+ | arm: | TODO |
| arm64: | ok |
| c6x: | ok |
| csky: | ok |
| h8300: | ok |
| hexagon: | ok |
| ia64: | TODO |
- | m68k: | ok |
+ | m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
| nds32: | ok |
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index d6e9fc7a7b19..f0a700946cac 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -27,7 +27,6 @@ config ALPHA
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select AUDIT_ARCH
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_VULNERABILITIES
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 0a89cc9def65..061eb8e23739 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -19,7 +19,6 @@ config ARC
select COMMON_CLK
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
- select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbadfa186f72..04a37a4cd9e0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -321,7 +321,6 @@ config ARCH_MULTIPLATFORM
select AUTO_ZRELADDR
select TIMER_OF
select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select HAVE_PCI
select PCI_DOMAINS_GENERIC if PCI
@@ -336,7 +335,6 @@ config ARM_SINGLE_ARMV7M
select TIMER_OF
select COMMON_CLK
select CPU_V7M
- select GENERIC_CLOCKEVENTS
select NO_IOPORT_MAP
select SPARSE_IRQ
select USE_OF
@@ -351,7 +349,6 @@ config ARCH_EP93XX
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM920T
- select GENERIC_CLOCKEVENTS
select GPIOLIB
select HAVE_LEGACY_CLK
help
@@ -361,7 +358,6 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select GENERIC_CLOCKEVENTS
select HAVE_IDE
select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
@@ -389,7 +385,6 @@ config ARCH_IXP4XX
select ARCH_SUPPORTS_BIG_ENDIAN
select CPU_XSCALE
select DMABOUNCE if PCI
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
select GPIOLIB
@@ -405,7 +400,6 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select CPU_PJ4
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_PCI
@@ -429,7 +423,6 @@ config ARCH_PXA
select CLKSRC_MMIO
select TIMER_OF
select CPU_XSCALE if !CPU_XSC3
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_PXA
select GPIOLIB
@@ -470,7 +463,6 @@ config ARCH_SA1100
select COMMON_CLK
select CPU_FREQ
select CPU_SA1100
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_IDE
@@ -485,7 +477,6 @@ config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ATAGS
select CLKSRC_SAMSUNG_PWM
- select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select GPIOLIB
select GENERIC_IRQ_MULTI_HANDLER
@@ -509,7 +500,6 @@ config ARCH_OMAP1
select ARCH_OMAP
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
@@ -772,7 +762,6 @@ config ARCH_ACORN
config PLAT_IOP
bool
- select GENERIC_CLOCKEVENTS
config PLAT_ORION
bool
@@ -1163,7 +1152,6 @@ config HAVE_SMP
config SMP
bool "Symmetric Multi-Processing"
depends on CPU_V6K || CPU_V7
- depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU || ARM_MPU
select IRQ_WORK
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index f858c352f72a..fee87e4104fd 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -101,7 +101,6 @@ config ARM64
select FRAME_POINTER
select GENERIC_ALLOCATOR
select GENERIC_ARCH_TOPOLOGY
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6f2494dd6d60..748e6d8c3b94 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -256,7 +256,6 @@ config ARCH_TEGRA
select ARM_GIC_PM
select CLKSRC_MMIO
select TIMER_OF
- select GENERIC_CLOCKEVENTS
select GPIOLIB
select PINCTRL
select PM
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 48d66bf0465d..bdeeac28b1be 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -19,7 +19,6 @@ config C6X
select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
- select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select MMU_GATHER_NO_RANGE if MMU
select SET_FS
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 268fad5f51cf..28fdf8303dff 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -28,7 +28,6 @@ config CSKY
select GENERIC_LIB_UCMPDI2
select GENERIC_ALLOCATOR
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 7945de067e9f..3e3e0f16f7e0 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -12,7 +12,6 @@ config H8300
select FRAME_POINTER
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
- select GENERIC_CLOCKEVENTS
select COMMON_CLK
select ARCH_WANT_FRAME_POINTERS
select OF
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index f2afabbadd43..6e00c16a36b5 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -27,7 +27,6 @@ config HEXAGON
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD
select STACKTRACE_SUPPORT
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select MODULES_USE_ELF_RELA
select GENERIC_CPU_DEVICES
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 648054d4f860..ce09f993d858 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -318,7 +318,6 @@ config M54xx
config COLDFIRE_PIT_TIMER
bool
- select GENERIC_CLOCKEVENTS
config COLDFIRE_TIMERS
bool
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 33925ffed68f..2f0d3f431faf 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -17,7 +17,6 @@ config MICROBLAZE
select COMMON_CLK
select DMA_DIRECT_REMAP if MMU
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2000bb2b0220..077c4ae09550 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -21,7 +21,6 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
- select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index e8e541fd2267..62313902d75d 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -17,7 +17,6 @@ config NDS32
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64
select GENERIC_CPU_DEVICES
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_IOREMAP
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c7c6ba6bec9d..c24955c81c92 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -10,7 +10,6 @@ config NIOS2
select COMMON_CLK
select TIMER_OF
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 6233c6293180..591acc5990dc 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -24,7 +24,6 @@ config OPENRISC
select GENERIC_CPU_DEVICES
select HAVE_UID16
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e9f13fe08492..57e2c75f76e9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -163,7 +163,6 @@ config PPC
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
select GENERIC_ATOMIC64 if PPC32
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 44377fd7860e..3842bbb4fe62 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -37,7 +37,6 @@ config RISCV
select EDAC_SUPPORT
select GENERIC_ARCH_TOPOLOGY if SMP
select GENERIC_ATOMIC64 if !64BIT
- select GENERIC_CLOCKEVENTS
select GENERIC_EARLY_IOREMAP
select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
select GENERIC_IOREMAP
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 4a2a12be04c9..db246781844d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -116,7 +116,6 @@ config S390
select CLONE_BACKWARDS2
select DMA_OPS if PCI
select DYNAMIC_FTRACE if FUNCTION_TRACER
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
select GENERIC_FIND_FIRST_BIT
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 159da4ed578f..5fa580219a86 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,7 +16,6 @@ config SUPERH
select CPU_NO_EFFICIENT_FFS
select DMA_DECLARE_COHERENT
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_SHOW
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index a6ca135442f9..718c51cf2c6c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -39,7 +39,6 @@ config SPARC
select HAVE_EBPF_JIT if SPARC64
select HAVE_DEBUG_BUGVERBOSE
select GENERIC_SMP_IDLE_THREAD
- select GENERIC_CLOCKEVENTS
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select MODULES_USE_ELF_RELA
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 4b799fad8b48..43333e36e0ba 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -17,7 +17,6 @@ config UML
select NO_DMA
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
- select GENERIC_CLOCKEVENTS
select HAVE_GCC_PLUGINS
select SET_FS
select TTY # Needed for line.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f6946b81f74a..0498d7596ccc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -108,7 +108,6 @@ config X86
select DCACHE_WORD_ACCESS
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_CLOCKEVENTS_MIN_ADJUST
select GENERIC_CMOS_UPDATE
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index d0dfa50bd0bb..2611ba336af8 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -16,7 +16,6 @@ config XTENSA
select COMMON_CLK
select DMA_REMAP if MMU
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index c6867f29d279..9a41848b6ebb 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -28,7 +28,7 @@ config GENERIC_TIME_VSYSCALL
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
- bool
+ def_bool !LEGACY_TIMER_TICK
# Architecture can handle broadcast in a driver-agnostic way
config ARCH_HAS_TICK_BROADCAST
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 15/15] timekeeping: default GENERIC_CLOCKEVENTS to enabled
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Thomas Gleixner, Arnd Bergmann, Russell King, Tony Luck,
Fenghua Yu, Greg Ungerer, Finn Thain, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM,
Geert Uytterhoeven
From: Arnd Bergmann <arnd@arndb.de>
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../features/time/clockevents/arch-support.txt | 6 +++---
arch/alpha/Kconfig | 1 -
arch/arc/Kconfig | 1 -
arch/arm/Kconfig | 12 ------------
arch/arm64/Kconfig | 1 -
arch/arm64/Kconfig.platforms | 1 -
arch/c6x/Kconfig | 1 -
arch/csky/Kconfig | 1 -
arch/h8300/Kconfig | 1 -
arch/hexagon/Kconfig | 1 -
arch/m68k/Kconfig.cpu | 1 -
arch/microblaze/Kconfig | 1 -
arch/mips/Kconfig | 1 -
arch/nds32/Kconfig | 1 -
arch/nios2/Kconfig | 1 -
arch/openrisc/Kconfig | 1 -
arch/powerpc/Kconfig | 1 -
arch/riscv/Kconfig | 1 -
arch/s390/Kconfig | 1 -
arch/sh/Kconfig | 1 -
arch/sparc/Kconfig | 1 -
arch/um/Kconfig | 1 -
arch/x86/Kconfig | 1 -
arch/xtensa/Kconfig | 1 -
kernel/time/Kconfig | 2 +-
25 files changed, 4 insertions(+), 38 deletions(-)
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index 61a5c9d68c15..6863a3fbddad 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -1,6 +1,6 @@
#
# Feature name: clockevents
-# Kconfig: GENERIC_CLOCKEVENTS
+# Kconfig: !LEGACY_TIMER_TICK
# description: arch support generic clock events
#
-----------------------
@@ -8,14 +8,14 @@
-----------------------
| alpha: | ok |
| arc: | ok |
- | arm: | ok |
+ | arm: | TODO |
| arm64: | ok |
| c6x: | ok |
| csky: | ok |
| h8300: | ok |
| hexagon: | ok |
| ia64: | TODO |
- | m68k: | ok |
+ | m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
| nds32: | ok |
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index d6e9fc7a7b19..f0a700946cac 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -27,7 +27,6 @@ config ALPHA
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select AUDIT_ARCH
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_VULNERABILITIES
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 0a89cc9def65..061eb8e23739 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -19,7 +19,6 @@ config ARC
select COMMON_CLK
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
- select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbadfa186f72..04a37a4cd9e0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -321,7 +321,6 @@ config ARCH_MULTIPLATFORM
select AUTO_ZRELADDR
select TIMER_OF
select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select HAVE_PCI
select PCI_DOMAINS_GENERIC if PCI
@@ -336,7 +335,6 @@ config ARM_SINGLE_ARMV7M
select TIMER_OF
select COMMON_CLK
select CPU_V7M
- select GENERIC_CLOCKEVENTS
select NO_IOPORT_MAP
select SPARSE_IRQ
select USE_OF
@@ -351,7 +349,6 @@ config ARCH_EP93XX
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM920T
- select GENERIC_CLOCKEVENTS
select GPIOLIB
select HAVE_LEGACY_CLK
help
@@ -361,7 +358,6 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select GENERIC_CLOCKEVENTS
select HAVE_IDE
select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
@@ -389,7 +385,6 @@ config ARCH_IXP4XX
select ARCH_SUPPORTS_BIG_ENDIAN
select CPU_XSCALE
select DMABOUNCE if PCI
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
select GPIOLIB
@@ -405,7 +400,6 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select CPU_PJ4
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_PCI
@@ -429,7 +423,6 @@ config ARCH_PXA
select CLKSRC_MMIO
select TIMER_OF
select CPU_XSCALE if !CPU_XSC3
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_PXA
select GPIOLIB
@@ -470,7 +463,6 @@ config ARCH_SA1100
select COMMON_CLK
select CPU_FREQ
select CPU_SA1100
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_IDE
@@ -485,7 +477,6 @@ config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ATAGS
select CLKSRC_SAMSUNG_PWM
- select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select GPIOLIB
select GENERIC_IRQ_MULTI_HANDLER
@@ -509,7 +500,6 @@ config ARCH_OMAP1
select ARCH_OMAP
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
@@ -772,7 +762,6 @@ config ARCH_ACORN
config PLAT_IOP
bool
- select GENERIC_CLOCKEVENTS
config PLAT_ORION
bool
@@ -1163,7 +1152,6 @@ config HAVE_SMP
config SMP
bool "Symmetric Multi-Processing"
depends on CPU_V6K || CPU_V7
- depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU || ARM_MPU
select IRQ_WORK
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index f858c352f72a..fee87e4104fd 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -101,7 +101,6 @@ config ARM64
select FRAME_POINTER
select GENERIC_ALLOCATOR
select GENERIC_ARCH_TOPOLOGY
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6f2494dd6d60..748e6d8c3b94 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -256,7 +256,6 @@ config ARCH_TEGRA
select ARM_GIC_PM
select CLKSRC_MMIO
select TIMER_OF
- select GENERIC_CLOCKEVENTS
select GPIOLIB
select PINCTRL
select PM
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 48d66bf0465d..bdeeac28b1be 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -19,7 +19,6 @@ config C6X
select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
- select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select MMU_GATHER_NO_RANGE if MMU
select SET_FS
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 268fad5f51cf..28fdf8303dff 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -28,7 +28,6 @@ config CSKY
select GENERIC_LIB_UCMPDI2
select GENERIC_ALLOCATOR
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 7945de067e9f..3e3e0f16f7e0 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -12,7 +12,6 @@ config H8300
select FRAME_POINTER
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
- select GENERIC_CLOCKEVENTS
select COMMON_CLK
select ARCH_WANT_FRAME_POINTERS
select OF
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index f2afabbadd43..6e00c16a36b5 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -27,7 +27,6 @@ config HEXAGON
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD
select STACKTRACE_SUPPORT
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select MODULES_USE_ELF_RELA
select GENERIC_CPU_DEVICES
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 648054d4f860..ce09f993d858 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -318,7 +318,6 @@ config M54xx
config COLDFIRE_PIT_TIMER
bool
- select GENERIC_CLOCKEVENTS
config COLDFIRE_TIMERS
bool
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 33925ffed68f..2f0d3f431faf 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -17,7 +17,6 @@ config MICROBLAZE
select COMMON_CLK
select DMA_DIRECT_REMAP if MMU
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2000bb2b0220..077c4ae09550 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -21,7 +21,6 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
- select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index e8e541fd2267..62313902d75d 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -17,7 +17,6 @@ config NDS32
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64
select GENERIC_CPU_DEVICES
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_IOREMAP
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c7c6ba6bec9d..c24955c81c92 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -10,7 +10,6 @@ config NIOS2
select COMMON_CLK
select TIMER_OF
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 6233c6293180..591acc5990dc 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -24,7 +24,6 @@ config OPENRISC
select GENERIC_CPU_DEVICES
select HAVE_UID16
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e9f13fe08492..57e2c75f76e9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -163,7 +163,6 @@ config PPC
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
select GENERIC_ATOMIC64 if PPC32
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 44377fd7860e..3842bbb4fe62 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -37,7 +37,6 @@ config RISCV
select EDAC_SUPPORT
select GENERIC_ARCH_TOPOLOGY if SMP
select GENERIC_ATOMIC64 if !64BIT
- select GENERIC_CLOCKEVENTS
select GENERIC_EARLY_IOREMAP
select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
select GENERIC_IOREMAP
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 4a2a12be04c9..db246781844d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -116,7 +116,6 @@ config S390
select CLONE_BACKWARDS2
select DMA_OPS if PCI
select DYNAMIC_FTRACE if FUNCTION_TRACER
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
select GENERIC_FIND_FIRST_BIT
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 159da4ed578f..5fa580219a86 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,7 +16,6 @@ config SUPERH
select CPU_NO_EFFICIENT_FFS
select DMA_DECLARE_COHERENT
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_SHOW
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index a6ca135442f9..718c51cf2c6c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -39,7 +39,6 @@ config SPARC
select HAVE_EBPF_JIT if SPARC64
select HAVE_DEBUG_BUGVERBOSE
select GENERIC_SMP_IDLE_THREAD
- select GENERIC_CLOCKEVENTS
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select MODULES_USE_ELF_RELA
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 4b799fad8b48..43333e36e0ba 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -17,7 +17,6 @@ config UML
select NO_DMA
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
- select GENERIC_CLOCKEVENTS
select HAVE_GCC_PLUGINS
select SET_FS
select TTY # Needed for line.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f6946b81f74a..0498d7596ccc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -108,7 +108,6 @@ config X86
select DCACHE_WORD_ACCESS
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_CLOCKEVENTS_MIN_ADJUST
select GENERIC_CMOS_UPDATE
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index d0dfa50bd0bb..2611ba336af8 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -16,7 +16,6 @@ config XTENSA
select COMMON_CLK
select DMA_REMAP if MMU
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index c6867f29d279..9a41848b6ebb 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -28,7 +28,7 @@ config GENERIC_TIME_VSYSCALL
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
- bool
+ def_bool !LEGACY_TIMER_TICK
# Architecture can handle broadcast in a driver-agnostic way
config ARCH_HAS_TICK_BROADCAST
--
2.27.0
^ permalink raw reply related [flat|nested] 79+ messages in thread* [PATCH v2 15/15] timekeeping: default GENERIC_CLOCKEVENTS to enabled
@ 2020-10-30 15:17 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-10-30 15:17 UTC (permalink / raw)
To: linux-kernel
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, Russell King, Finn Thain,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Geert Uytterhoeven, Thomas Gleixner, Greg Ungerer,
Joshua Thompson
From: Arnd Bergmann <arnd@arndb.de>
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.
Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.
For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.
At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:
text data bss dec hex filename
3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent
3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent
On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../features/time/clockevents/arch-support.txt | 6 +++---
arch/alpha/Kconfig | 1 -
arch/arc/Kconfig | 1 -
arch/arm/Kconfig | 12 ------------
arch/arm64/Kconfig | 1 -
arch/arm64/Kconfig.platforms | 1 -
arch/c6x/Kconfig | 1 -
arch/csky/Kconfig | 1 -
arch/h8300/Kconfig | 1 -
arch/hexagon/Kconfig | 1 -
arch/m68k/Kconfig.cpu | 1 -
arch/microblaze/Kconfig | 1 -
arch/mips/Kconfig | 1 -
arch/nds32/Kconfig | 1 -
arch/nios2/Kconfig | 1 -
arch/openrisc/Kconfig | 1 -
arch/powerpc/Kconfig | 1 -
arch/riscv/Kconfig | 1 -
arch/s390/Kconfig | 1 -
arch/sh/Kconfig | 1 -
arch/sparc/Kconfig | 1 -
arch/um/Kconfig | 1 -
arch/x86/Kconfig | 1 -
arch/xtensa/Kconfig | 1 -
kernel/time/Kconfig | 2 +-
25 files changed, 4 insertions(+), 38 deletions(-)
diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt
index 61a5c9d68c15..6863a3fbddad 100644
--- a/Documentation/features/time/clockevents/arch-support.txt
+++ b/Documentation/features/time/clockevents/arch-support.txt
@@ -1,6 +1,6 @@
#
# Feature name: clockevents
-# Kconfig: GENERIC_CLOCKEVENTS
+# Kconfig: !LEGACY_TIMER_TICK
# description: arch support generic clock events
#
-----------------------
@@ -8,14 +8,14 @@
-----------------------
| alpha: | ok |
| arc: | ok |
- | arm: | ok |
+ | arm: | TODO |
| arm64: | ok |
| c6x: | ok |
| csky: | ok |
| h8300: | ok |
| hexagon: | ok |
| ia64: | TODO |
- | m68k: | ok |
+ | m68k: | TODO |
| microblaze: | ok |
| mips: | ok |
| nds32: | ok |
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index d6e9fc7a7b19..f0a700946cac 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -27,7 +27,6 @@ config ALPHA
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select AUDIT_ARCH
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_VULNERABILITIES
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 0a89cc9def65..061eb8e23739 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -19,7 +19,6 @@ config ARC
select COMMON_CLK
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
- select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbadfa186f72..04a37a4cd9e0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -321,7 +321,6 @@ config ARCH_MULTIPLATFORM
select AUTO_ZRELADDR
select TIMER_OF
select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select HAVE_PCI
select PCI_DOMAINS_GENERIC if PCI
@@ -336,7 +335,6 @@ config ARM_SINGLE_ARMV7M
select TIMER_OF
select COMMON_CLK
select CPU_V7M
- select GENERIC_CLOCKEVENTS
select NO_IOPORT_MAP
select SPARSE_IRQ
select USE_OF
@@ -351,7 +349,6 @@ config ARCH_EP93XX
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CPU_ARM920T
- select GENERIC_CLOCKEVENTS
select GPIOLIB
select HAVE_LEGACY_CLK
help
@@ -361,7 +358,6 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select GENERIC_CLOCKEVENTS
select HAVE_IDE
select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
@@ -389,7 +385,6 @@ config ARCH_IXP4XX
select ARCH_SUPPORTS_BIG_ENDIAN
select CPU_XSCALE
select DMABOUNCE if PCI
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
select GPIOLIB
@@ -405,7 +400,6 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select CPU_PJ4
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_PCI
@@ -429,7 +423,6 @@ config ARCH_PXA
select CLKSRC_MMIO
select TIMER_OF
select CPU_XSCALE if !CPU_XSC3
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_PXA
select GPIOLIB
@@ -470,7 +463,6 @@ config ARCH_SA1100
select COMMON_CLK
select CPU_FREQ
select CPU_SA1100
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
select HAVE_IDE
@@ -485,7 +477,6 @@ config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ATAGS
select CLKSRC_SAMSUNG_PWM
- select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select GPIOLIB
select GENERIC_IRQ_MULTI_HANDLER
@@ -509,7 +500,6 @@ config ARCH_OMAP1
select ARCH_OMAP
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_MULTI_HANDLER
select GPIOLIB
@@ -772,7 +762,6 @@ config ARCH_ACORN
config PLAT_IOP
bool
- select GENERIC_CLOCKEVENTS
config PLAT_ORION
bool
@@ -1163,7 +1152,6 @@ config HAVE_SMP
config SMP
bool "Symmetric Multi-Processing"
depends on CPU_V6K || CPU_V7
- depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU || ARM_MPU
select IRQ_WORK
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index f858c352f72a..fee87e4104fd 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -101,7 +101,6 @@ config ARM64
select FRAME_POINTER
select GENERIC_ALLOCATOR
select GENERIC_ARCH_TOPOLOGY
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6f2494dd6d60..748e6d8c3b94 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -256,7 +256,6 @@ config ARCH_TEGRA
select ARM_GIC_PM
select CLKSRC_MMIO
select TIMER_OF
- select GENERIC_CLOCKEVENTS
select GPIOLIB
select PINCTRL
select PM
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 48d66bf0465d..bdeeac28b1be 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -19,7 +19,6 @@ config C6X
select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
- select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select MMU_GATHER_NO_RANGE if MMU
select SET_FS
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 268fad5f51cf..28fdf8303dff 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -28,7 +28,6 @@ config CSKY
select GENERIC_LIB_UCMPDI2
select GENERIC_ALLOCATOR
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 7945de067e9f..3e3e0f16f7e0 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -12,7 +12,6 @@ config H8300
select FRAME_POINTER
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
- select GENERIC_CLOCKEVENTS
select COMMON_CLK
select ARCH_WANT_FRAME_POINTERS
select OF
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index f2afabbadd43..6e00c16a36b5 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -27,7 +27,6 @@ config HEXAGON
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD
select STACKTRACE_SUPPORT
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select MODULES_USE_ELF_RELA
select GENERIC_CPU_DEVICES
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 648054d4f860..ce09f993d858 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -318,7 +318,6 @@ config M54xx
config COLDFIRE_PIT_TIMER
bool
- select GENERIC_CLOCKEVENTS
config COLDFIRE_TIMERS
bool
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 33925ffed68f..2f0d3f431faf 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -17,7 +17,6 @@ config MICROBLAZE
select COMMON_CLK
select DMA_DIRECT_REMAP if MMU
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2000bb2b0220..077c4ae09550 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -21,7 +21,6 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
- select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index e8e541fd2267..62313902d75d 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -17,7 +17,6 @@ config NDS32
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64
select GENERIC_CPU_DEVICES
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_IOREMAP
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c7c6ba6bec9d..c24955c81c92 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -10,7 +10,6 @@ config NIOS2
select COMMON_CLK
select TIMER_OF
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 6233c6293180..591acc5990dc 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -24,7 +24,6 @@ config OPENRISC
select GENERIC_CPU_DEVICES
select HAVE_UID16
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index e9f13fe08492..57e2c75f76e9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -163,7 +163,6 @@ config PPC
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
select GENERIC_ATOMIC64 if PPC32
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 44377fd7860e..3842bbb4fe62 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -37,7 +37,6 @@ config RISCV
select EDAC_SUPPORT
select GENERIC_ARCH_TOPOLOGY if SMP
select GENERIC_ATOMIC64 if !64BIT
- select GENERIC_CLOCKEVENTS
select GENERIC_EARLY_IOREMAP
select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
select GENERIC_IOREMAP
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 4a2a12be04c9..db246781844d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -116,7 +116,6 @@ config S390
select CLONE_BACKWARDS2
select DMA_OPS if PCI
select DYNAMIC_FTRACE if FUNCTION_TRACER
- select GENERIC_CLOCKEVENTS
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
select GENERIC_FIND_FIRST_BIT
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 159da4ed578f..5fa580219a86 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,7 +16,6 @@ config SUPERH
select CPU_NO_EFFICIENT_FFS
select DMA_DECLARE_COHERENT
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_SHOW
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index a6ca135442f9..718c51cf2c6c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -39,7 +39,6 @@ config SPARC
select HAVE_EBPF_JIT if SPARC64
select HAVE_DEBUG_BUGVERBOSE
select GENERIC_SMP_IDLE_THREAD
- select GENERIC_CLOCKEVENTS
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select MODULES_USE_ELF_RELA
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 4b799fad8b48..43333e36e0ba 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -17,7 +17,6 @@ config UML
select NO_DMA
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
- select GENERIC_CLOCKEVENTS
select HAVE_GCC_PLUGINS
select SET_FS
select TTY # Needed for line.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f6946b81f74a..0498d7596ccc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -108,7 +108,6 @@ config X86
select DCACHE_WORD_ACCESS
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_CLOCKEVENTS_MIN_ADJUST
select GENERIC_CMOS_UPDATE
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index d0dfa50bd0bb..2611ba336af8 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -16,7 +16,6 @@ config XTENSA
select COMMON_CLK
select DMA_REMAP if MMU
select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index c6867f29d279..9a41848b6ebb 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -28,7 +28,7 @@ config GENERIC_TIME_VSYSCALL
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
- bool
+ def_bool !LEGACY_TIMER_TICK
# Architecture can handle broadcast in a driver-agnostic way
config ARCH_HAS_TICK_BROADCAST
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 79+ messages in thread
* Re: [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
2020-10-30 15:17 ` Arnd Bergmann
(?)
@ 2020-11-01 3:43 ` Finn Thain
-1 siblings, 0 replies; 79+ messages in thread
From: Finn Thain @ 2020-11-01 3:43 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Fri, 30 Oct 2020, Arnd Bergmann wrote:
> CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
> platforms, with only ARM EBSA110 recently. As this has no more known
> users, the first three patches remove EBSA110 along with one platform
> specific driver and the ARCH_GETTIMEOFFSET infrastructure.
>
The CONFIG_ARCH_GETTIMEOFFSET patches weren't part of v1. Is there some
kind of dependency here?
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
@ 2020-11-01 3:43 ` Finn Thain
0 siblings, 0 replies; 79+ messages in thread
From: Finn Thain @ 2020-11-01 3:43 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Fri, 30 Oct 2020, Arnd Bergmann wrote:
> CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
> platforms, with only ARM EBSA110 recently. As this has no more known
> users, the first three patches remove EBSA110 along with one platform
> specific driver and the ARCH_GETTIMEOFFSET infrastructure.
>
The CONFIG_ARCH_GETTIMEOFFSET patches weren't part of v1. Is there some
kind of dependency here?
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
@ 2020-11-01 3:43 ` Finn Thain
0 siblings, 0 replies; 79+ messages in thread
From: Finn Thain @ 2020-11-01 3:43 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, linux-kernel, Russell King,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
On Fri, 30 Oct 2020, Arnd Bergmann wrote:
> CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
> platforms, with only ARM EBSA110 recently. As this has no more known
> users, the first three patches remove EBSA110 along with one platform
> specific driver and the ARCH_GETTIMEOFFSET infrastructure.
>
The CONFIG_ARCH_GETTIMEOFFSET patches weren't part of v1. Is there some
kind of dependency here?
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread
* Re: [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
2020-11-01 3:43 ` Finn Thain
(?)
@ 2020-11-01 9:53 ` Arnd Bergmann
-1 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-11-01 9:53 UTC (permalink / raw)
To: Finn Thain
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Sun, Nov 1, 2020 at 4:47 AM Finn Thain <fthain@telegraphics.com.au> wrote:
>
> On Fri, 30 Oct 2020, Arnd Bergmann wrote:
>
> > CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
> > platforms, with only ARM EBSA110 recently. As this has no more known
> > users, the first three patches remove EBSA110 along with one platform
> > specific driver and the ARCH_GETTIMEOFFSET infrastructure.
> >
>
> The CONFIG_ARCH_GETTIMEOFFSET patches weren't part of v1. Is there some
> kind of dependency here?
There is technically a dependency, though nobody would notice
in practice: removing the ARM timer tick function in patch 6 would
break the ebsa110 platform if we didn't first remove it in patch 1.
Changing ebsa110 to use legacy_timer_tick in turn would introduce
a conflict against the removal patch.
Neither of those is particularly harmful as there are no users of
the affected ebsa110 code, but keeping the two series together
avoids getting complaints from the build bots.
Arnd
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
@ 2020-11-01 9:53 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-11-01 9:53 UTC (permalink / raw)
To: Finn Thain
Cc: linux-kernel, Thomas Gleixner, Arnd Bergmann, Russell King,
Tony Luck, Fenghua Yu, Greg Ungerer, Philip Blundell,
Joshua Thompson, Sam Creasey, James E.J. Bottomley, Helge Deller,
Daniel Lezcano, John Stultz, Stephen Boyd, Linus Walleij,
linux-ia64, Parisc List, linux-m68k, Linux ARM
On Sun, Nov 1, 2020 at 4:47 AM Finn Thain <fthain@telegraphics.com.au> wrote:
>
> On Fri, 30 Oct 2020, Arnd Bergmann wrote:
>
> > CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
> > platforms, with only ARM EBSA110 recently. As this has no more known
> > users, the first three patches remove EBSA110 along with one platform
> > specific driver and the ARCH_GETTIMEOFFSET infrastructure.
> >
>
> The CONFIG_ARCH_GETTIMEOFFSET patches weren't part of v1. Is there some
> kind of dependency here?
There is technically a dependency, though nobody would notice
in practice: removing the ARM timer tick function in patch 6 would
break the ebsa110 platform if we didn't first remove it in patch 1.
Changing ebsa110 to use legacy_timer_tick in turn would introduce
a conflict against the removal patch.
Neither of those is particularly harmful as there are no users of
the affected ebsa110 code, but keeping the two series together
avoids getting complaints from the build bots.
Arnd
^ permalink raw reply [flat|nested] 79+ messages in thread* Re: [PATCH v2 00/15] timers: clean up ARCH_GETTIMEOFFSET, LEGACY_TIMER_TICK
@ 2020-11-01 9:53 ` Arnd Bergmann
0 siblings, 0 replies; 79+ messages in thread
From: Arnd Bergmann @ 2020-11-01 9:53 UTC (permalink / raw)
To: Finn Thain
Cc: Sam Creasey, Fenghua Yu, Linus Walleij, Tony Luck, linux-ia64,
Parisc List, Arnd Bergmann, Stephen Boyd, Philip Blundell,
Helge Deller, Daniel Lezcano, linux-kernel, Russell King,
James E.J. Bottomley, linux-m68k, John Stultz, Linux ARM,
Thomas Gleixner, Greg Ungerer, Joshua Thompson
On Sun, Nov 1, 2020 at 4:47 AM Finn Thain <fthain@telegraphics.com.au> wrote:
>
> On Fri, 30 Oct 2020, Arnd Bergmann wrote:
>
> > CONFIG_ARCH_GETTIMEOFFSET has been gradually phased out from all
> > platforms, with only ARM EBSA110 recently. As this has no more known
> > users, the first three patches remove EBSA110 along with one platform
> > specific driver and the ARCH_GETTIMEOFFSET infrastructure.
> >
>
> The CONFIG_ARCH_GETTIMEOFFSET patches weren't part of v1. Is there some
> kind of dependency here?
There is technically a dependency, though nobody would notice
in practice: removing the ARM timer tick function in patch 6 would
break the ebsa110 platform if we didn't first remove it in patch 1.
Changing ebsa110 to use legacy_timer_tick in turn would introduce
a conflict against the removal patch.
Neither of those is particularly harmful as there are no users of
the affected ebsa110 code, but keeping the two series together
avoids getting complaints from the build bots.
Arnd
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 79+ messages in thread