All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: u-boot@lists.denx.de
Subject: [PATCH 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset
Date: Tue, 10 Nov 2020 11:05:40 +0200	[thread overview]
Message-ID: <20201110090602.2255-5-t-kristo@ti.com> (raw)
In-Reply-To: <20201110090602.2255-1-t-kristo@ti.com>

From: Lokesh Vutla <lokeshvutla@ti.com>

board_fit_image_post_process() passes only start and size of the image,
but type of the image is not passed. So pass fit and node_offset, to
derive information about image to be processed.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/security.c  | 3 ++-
 arch/arm/mach-keystone/mon.c | 3 ++-
 board/ti/am335x/board.c      | 3 ++-
 board/ti/am43xx/board.c      | 3 ++-
 board/ti/am57xx/board.c      | 3 ++-
 board/ti/dra7xx/evm.c        | 3 ++-
 common/image-fit.c           | 2 +-
 common/spl/spl_fit.c         | 2 +-
 include/image.h              | 7 +++++--
 9 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c
index 66f90a5a34..5b5ff9ba7b 100644
--- a/arch/arm/mach-k3/security.c
+++ b/arch/arm/mach-k3/security.c
@@ -18,7 +18,8 @@
 #include <spl.h>
 #include <asm/arch/sys_proto.h>
 
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size)
 {
 	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
 	struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c
index 58995d73ac..b863bab196 100644
--- a/arch/arm/mach-keystone/mon.c
+++ b/arch/arm/mach-keystone/mon.c
@@ -103,7 +103,8 @@ static int k2_hs_bm_auth(int cmd, void *arg1)
 	return  result;
 }
 
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size)
 {
 	int result = 0;
 	void *image = *p_image;
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 984cc5e3ba..9a8cc6649c 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -956,7 +956,8 @@ int board_fit_config_name_match(const char *name)
 #endif
 
 #ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size)
 {
 	secure_boot_verify_image(p_image, p_size);
 }
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index de49590031..d14355aacd 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -895,7 +895,8 @@ int embedded_dtb_select(void)
 #endif
 
 #ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size)
 {
 	secure_boot_verify_image(p_image, p_size);
 }
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 7809875510..4fd452b050 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -1197,7 +1197,8 @@ static int board_bootmode_has_emmc(void)
 #endif
 
 #ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size)
 {
 	secure_boot_verify_image(p_image, p_size);
 }
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index ca1976e16a..6364d06ea5 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -1064,7 +1064,8 @@ int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
 #endif
 
 #ifdef CONFIG_TI_SECURE_DEVICE
-void board_fit_image_post_process(void **p_image, size_t *p_size)
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size)
 {
 	secure_boot_verify_image(p_image, p_size);
 }
diff --git a/common/image-fit.c b/common/image-fit.c
index d54eff9033..093fe8164a 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -2042,7 +2042,7 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
 
 #if !defined(USE_HOSTCC) && defined(CONFIG_FIT_IMAGE_POST_PROCESS)
 	/* perform any post-processing on the image data */
-	board_fit_image_post_process(&buf, &size);
+	board_fit_image_post_process(fit, noffset, &buf, &size);
 #endif
 
 	len = (ulong)size;
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index a90d821c82..90a0863057 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -316,7 +316,7 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
 #endif
 
 #ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
-	board_fit_image_post_process(&src, &length);
+	board_fit_image_post_process(fit, node, &src, &length);
 #endif
 
 	if (IS_ENABLED(CONFIG_SPL_GZIP) && image_comp == IH_COMP_GZIP) {
diff --git a/include/image.h b/include/image.h
index 10995b8e24..5d03511f38 100644
--- a/include/image.h
+++ b/include/image.h
@@ -1537,12 +1537,15 @@ int board_fit_config_name_match(const char *name);
  * into the FIT creation (i.e. the binary blobs would have been pre-processed
  * before being added to the FIT image).
  *
+ * @fit: pointer to fit image
+ * @node: offset of image node
  * @image: pointer to the image start pointer
  * @size: pointer to the image size
  * @return no return value (failure should be handled internally)
  */
-void board_fit_image_post_process(void **p_image, size_t *p_size);
-#endif /* CONFIG_SPL_FIT_IMAGE_POST_PROCESS */
+void board_fit_image_post_process(const void *fit, int node, void **p_image,
+				  size_t *p_size);
+#endif
 
 #define FDT_ERROR	((ulong)(-1))
 
-- 
2.17.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

  parent reply	other threads:[~2020-11-10  9:05 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-10  9:05 [PATCH 00/26] TI J7 SoC HSM Rearch support series Tero Kristo
2020-11-10  9:05 ` [PATCH 01/26] lib: rational: copy the rational fraction lib routines from Linux Tero Kristo
2020-11-10 12:55   ` Tom Rini
2020-11-11  7:03     ` Tero Kristo
2020-11-10  9:05 ` [PATCH 02/26] ram: k3-j721e: fix clk_set_rate API usage Tero Kristo
2020-11-10  9:05 ` [PATCH 03/26] remoteproc: k3-r5: remove sysfw PM calls if not supported Tero Kristo
2020-11-15 10:29   ` Lokesh Vutla
2020-11-16 12:08     ` Tero Kristo
2020-11-10  9:05 ` Tero Kristo [this message]
2020-11-10  9:05 ` [PATCH 05/26] clk: fixed_rate: add API for directly registering fixed rate clocks Tero Kristo
2020-11-15 10:27   ` Lokesh Vutla
2020-11-16  0:42   ` Peng Fan
2020-11-10  9:05 ` [PATCH 06/26] clk: fix clock tree dump to properly dump out every registered clock Tero Kristo
2020-11-15 10:28   ` Lokesh Vutla
2020-11-10  9:05 ` [PATCH 07/26] clk: do not attempt to fetch clock pointer with null device Tero Kristo
2020-11-10  9:05 ` [PATCH 08/26] clk: add support for setting clk rate from cmdline Tero Kristo
2020-11-15 10:29   ` Lokesh Vutla
2020-11-16 12:06     ` Tero Kristo
2020-11-16 14:26       ` Lukasz Majewski
2020-11-10  9:05 ` [PATCH 09/26] clk: sci-clk: fix return value of set_rate Tero Kristo
2020-11-10  9:05 ` [PATCH 10/26] clk: fix assigned-clocks to pass with deferring provider Tero Kristo
2020-11-10  9:05 ` [PATCH 11/26] clk: fix set_rate to clean up cached rates for the hierarchy Tero Kristo
2020-11-10  9:05 ` [PATCH 12/26] clk: add support for TI K3 SoC PLL Tero Kristo
2020-11-10  9:05 ` [PATCH 13/26] clk: add support for TI K3 SoC clocks Tero Kristo
2020-11-10  9:05 ` [PATCH 14/26] power: domain: Introduce driver for raw TI K3 PDs Tero Kristo
2020-11-10  9:05 ` [PATCH 15/26] cmd: ti: pd: Add debug command for K3 power domains Tero Kristo
2020-11-10  9:05 ` [PATCH 16/26] tools: k3_fit_atf: add DM binary to the FIT image Tero Kristo
2020-11-10  9:05 ` [PATCH 17/26] arm: mach-k3: Add platform data for j721e and j7200 Tero Kristo
2020-11-10  9:05 ` [PATCH 18/26] arm: mach-k3: add support for detecting firmware images from FIT Tero Kristo
2020-11-10  9:05 ` [PATCH 19/26] arm: mach-k3: j721e: force enable A72 core 0 during spl shutdown Tero Kristo
2020-11-16  4:21   ` Lokesh Vutla
2020-11-16 12:22     ` Tero Kristo
2020-11-10  9:05 ` [PATCH 20/26] arm: mach-k3: do board config for PM and RM only if supported Tero Kristo
2020-11-16  4:23   ` Lokesh Vutla
2020-11-16 12:27     ` Tero Kristo
2020-11-17  6:14       ` Lokesh Vutla
2020-11-17  9:22         ` Tero Kristo
2020-11-18 10:23           ` Tero Kristo
2020-11-10  9:05 ` [PATCH 21/26] arm: mach-k3: common: Drop main r5 start Tero Kristo
2020-11-16  4:24   ` Lokesh Vutla
2020-11-16 12:28     ` Tero Kristo
2020-11-10  9:05 ` [PATCH 22/26] arm: mach-k3: sysfw-loader: pass boardcfg to sciserver Tero Kristo
2020-11-10  9:05 ` [PATCH 23/26] configs: j721e_evm_r5: Enable raw access power management features Tero Kristo
2020-11-10  9:06 ` [PATCH 24/26] configs: j721e_evm_r5: disable SCI PM drivers Tero Kristo
2020-11-10  9:06 ` [PATCH 25/26] configs: j721e_evm_r5: enable FIT image post processing Tero Kristo
2020-11-10  9:06 ` [PATCH 26/26] configs: j7200_evm_r5: Enable raw access power management features Tero Kristo
2020-11-16  4:13 ` [PATCH 00/26] TI J7 SoC HSM Rearch support series Lokesh Vutla
2020-11-16 12:13   ` Tero Kristo
2020-11-16 15:53     ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201110090602.2255-5-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.