From mboxrd@z Thu Jan  1 00:00:00 1970
From: Oliver Graute <oliver.graute@gmail.com>
Date: Thu, 19 Nov 2020 15:27:31 +0100
Subject: [PATCH v1 2/7] board: toradex: add apalis-imx8x 2gb wb it v1.1a
 module support
In-Reply-To: <20201022082143.21170-3-igor.opaniuk@gmail.com>
References: <20201022082143.21170-1-igor.opaniuk@gmail.com>
 <20201022082143.21170-3-igor.opaniuk@gmail.com>
Message-ID: <20201119142731.GA20054@optiplex>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 22/10/20, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
> 
> * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
> ETH PHY encounters bring up problems after reset, this will be fixed
> soon on SCU FW side.

Hello Igor,

are these ETH Phy problems also in NXP provided SCU FW 1.5.1/ 1.6.0?

Because I observe some phy clk issue after upgrading from SCU FW 1.2.6
to 1.5.1/1.6.0. (iMX8QM)

Best regards,

Oliver