From mboxrd@z Thu Jan  1 00:00:00 1970
From: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Date: Fri, 20 Nov 2020 14:24:22 +0100
Subject: [patch v3 1/9] rockchip: video: vop: Use endpoint compatible string
 to find VOP mode
References: <20201120132421.500365403@rtp-net.org>
Message-ID: <20201120132823.638207109@rtp-net.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

The current code is using an hard coded enum and the of node reg value of
endpoint to find out if the endpoint is mipi/hdmi/lvds/edp/dp. The order
is different between rk3288, rk3399 vop little, rk3399 vop big.

A possible solution would be to make sure that the rk3288.dtsi and 
rk3399.dtsi files have "expected" reg value or an other solution is
to find the kind of endpoint by comparing the endpoint compatible value.

This patch is implementing the more flexible second solution.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>

Index: u-boot/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
===================================================================
--- u-boot.orig/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
+++ u-boot/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
@@ -85,26 +85,13 @@ enum {
 	LB_RGB_1280X8 = 0x5
 };
 
-#if defined(CONFIG_ROCKCHIP_RK3399)
 enum vop_modes {
 	VOP_MODE_EDP = 0,
 	VOP_MODE_MIPI,
 	VOP_MODE_HDMI,
-	VOP_MODE_MIPI1,
-	VOP_MODE_DP,
-	VOP_MODE_NONE,
-};
-#else
-enum vop_modes {
-	VOP_MODE_EDP = 0,
-	VOP_MODE_HDMI,
 	VOP_MODE_LVDS,
-	VOP_MODE_MIPI,
-	VOP_MODE_NONE,
-	VOP_MODE_AUTO_DETECT,
-	VOP_MODE_UNKNOWN,
+	VOP_MODE_DP,
 };
-#endif
 
 /* VOP_VERSION_INFO */
 #define M_FPGA_VERSION (0xffff << 16)
Index: u-boot/drivers/video/rockchip/rk_vop.c
===================================================================
--- u-boot.orig/drivers/video/rockchip/rk_vop.c
+++ u-boot/drivers/video/rockchip/rk_vop.c
@@ -235,12 +235,11 @@ static int rk_display_init(struct udevic
 	struct clk clk;
 	enum video_log2_bpp l2bpp;
 	ofnode remote;
+	const char *compat;
 
 	debug("%s(%s, %lu, %s)\n", __func__,
 	      dev_read_name(dev), fbbase, ofnode_get_name(ep_node));
 
-	vop_id = ofnode_read_s32_default(ep_node, "reg", -1);
-	debug("vop_id=%d\n", vop_id);
 	ret = ofnode_read_u32(ep_node, "remote-endpoint", &remote_phandle);
 	if (ret)
 		return ret;
@@ -282,6 +281,28 @@ static int rk_display_init(struct udevic
 		if (disp)
 			break;
 	};
+	compat = ofnode_get_property(remote, "compatible", NULL);
+	if (!compat) {
+		debug("%s(%s): Failed to find compatible property\n",
+		      __func__, dev_read_name(dev));
+		return -EINVAL;
+	}
+	if (strstr(compat, "edp")) {
+		vop_id = VOP_MODE_EDP;
+	} else if (strstr(compat, "mipi")) {
+		vop_id = VOP_MODE_MIPI;
+	} else if (strstr(compat, "hdmi")) {
+		vop_id = VOP_MODE_HDMI;
+	} else if (strstr(compat, "cdn-dp")) {
+		vop_id = VOP_MODE_DP;
+	} else if (strstr(compat, "lvds")) {
+		vop_id = VOP_MODE_LVDS;
+	} else {
+		debug("%s(%s): Failed to find vop mode for %s\n",
+		      __func__, dev_read_name(dev), compat);
+		return -EINVAL;
+	}
+	debug("vop_id=%d\n", vop_id);
 
 	disp_uc_plat = dev_get_uclass_platdata(disp);
 	debug("Found device '%s', disp_uc_priv=%p\n", disp->name, disp_uc_plat);