* [PATCH] PCI/MSI: Set device flag indicating only 32-bit MSI support
@ 2020-11-17 14:57 Vidya Sagar
2020-11-20 21:30 ` Bjorn Helgaas
2020-11-24 10:50 ` [PATCH V2] " Vidya Sagar
0 siblings, 2 replies; 9+ messages in thread
From: Vidya Sagar @ 2020-11-17 14:57 UTC (permalink / raw)
To: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh
Cc: linux-pci, linux-kernel, kthota, mmaddireddy, vidyas, sagar.tv
There are devices (Ex:- Marvell SATA controller) that don't support
64-bit MSIs and the same is advertised through their MSI capability
register. Set no_64bit_msi flag explicitly for such devices in the
MSI setup code so that the msi_verify_entries() API would catch
if the MSI arch code tries to use 64-bit MSI.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
drivers/pci/msi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d52d118979a6..af49da28854e 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
- if (control & PCI_MSI_FLAGS_64BIT)
+ if (control & PCI_MSI_FLAGS_64BIT) {
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
- else
+ } else {
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
+ dev->no_64bit_msi = 1;
+ }
/* Save the initial mask status */
if (entry->msi_attrib.maskbit)
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-11-17 14:57 [PATCH] PCI/MSI: Set device flag indicating only 32-bit MSI support Vidya Sagar
@ 2020-11-20 21:30 ` Bjorn Helgaas
2020-11-24 3:57 ` Vidya Sagar
2020-11-24 10:50 ` [PATCH V2] " Vidya Sagar
1 sibling, 1 reply; 9+ messages in thread
From: Bjorn Helgaas @ 2020-11-20 21:30 UTC (permalink / raw)
To: Vidya Sagar
Cc: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh,
linux-pci, linux-kernel, kthota, mmaddireddy, sagar.tv
On Tue, Nov 17, 2020 at 08:27:28PM +0530, Vidya Sagar wrote:
> There are devices (Ex:- Marvell SATA controller) that don't support
> 64-bit MSIs and the same is advertised through their MSI capability
> register.
I *think* you're saying these devices behave correctly per spec: they
don't support 64-bit MSI, and they don't advertise support for 64-bit
MSI. Right?
> Set no_64bit_msi flag explicitly for such devices in the
> MSI setup code so that the msi_verify_entries() API would catch
> if the MSI arch code tries to use 64-bit MSI.
And you want msi_verify_entries() to catch attempts by the arch code
to assign a 64-bit MSI address?
That sounds OK, but the error message ("Device has broken 64-bit MSI")
is not appropriate if the device is actually *not* broken.
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> drivers/pci/msi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index d52d118979a6..af49da28854e 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
> entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
> entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
>
> - if (control & PCI_MSI_FLAGS_64BIT)
> + if (control & PCI_MSI_FLAGS_64BIT) {
> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
> - else
> + } else {
> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
> + dev->no_64bit_msi = 1;
> + }
>
> /* Save the initial mask status */
> if (entry->msi_attrib.maskbit)
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-11-20 21:30 ` Bjorn Helgaas
@ 2020-11-24 3:57 ` Vidya Sagar
0 siblings, 0 replies; 9+ messages in thread
From: Vidya Sagar @ 2020-11-24 3:57 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh,
linux-pci, linux-kernel, kthota, mmaddireddy, sagar.tv
On 11/21/2020 3:00 AM, Bjorn Helgaas wrote:
> External email: Use caution opening links or attachments
>
>
> On Tue, Nov 17, 2020 at 08:27:28PM +0530, Vidya Sagar wrote:
>> There are devices (Ex:- Marvell SATA controller) that don't support
>> 64-bit MSIs and the same is advertised through their MSI capability
>> register.
>
> I *think* you're saying these devices behave correctly per spec: they
> don't support 64-bit MSI, and they don't advertise support for 64-bit
> MSI. Right?
Yes. That is what I intended to say.
>
>> Set no_64bit_msi flag explicitly for such devices in the
>> MSI setup code so that the msi_verify_entries() API would catch
>> if the MSI arch code tries to use 64-bit MSI.
>
> And you want msi_verify_entries() to catch attempts by the arch code
> to assign a 64-bit MSI address?
Yes.
>
> That sounds OK, but the error message ("Device has broken 64-bit MSI")
> is not appropriate if the device is actually *not* broken.
Ok. I didn't change the existing error message. I'll change it to cover
both the scenarios i.e. either the device is broken or the device
doesn't really support 64-bit MSI.
>
>> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
>> ---
>> drivers/pci/msi.c | 6 ++++--
>> 1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index d52d118979a6..af49da28854e 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
>> @@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
>> entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
>> entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
>>
>> - if (control & PCI_MSI_FLAGS_64BIT)
>> + if (control & PCI_MSI_FLAGS_64BIT) {
>> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
>> - else
>> + } else {
>> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
>> + dev->no_64bit_msi = 1;
>> + }
>>
>> /* Save the initial mask status */
>> if (entry->msi_attrib.maskbit)
>> --
>> 2.17.1
>>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH V2] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-11-17 14:57 [PATCH] PCI/MSI: Set device flag indicating only 32-bit MSI support Vidya Sagar
2020-11-20 21:30 ` Bjorn Helgaas
@ 2020-11-24 10:50 ` Vidya Sagar
2020-12-03 5:00 ` Vidya Sagar
2020-12-03 18:24 ` Bjorn Helgaas
1 sibling, 2 replies; 9+ messages in thread
From: Vidya Sagar @ 2020-11-24 10:50 UTC (permalink / raw)
To: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh
Cc: linux-pci, linux-kernel, kthota, mmaddireddy, vidyas, sagar.tv
There are devices (Ex:- Marvell SATA controller) that don't support
64-bit MSIs and the same is advertised through their MSI capability
register. Set no_64bit_msi flag explicitly for such devices in the
MSI setup code so that the msi_verify_entries() API would catch
if the MSI arch code tries to use 64-bit MSI.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
V2:
* Addressed Bjorn's comment and changed the error message
drivers/pci/msi.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d52d118979a6..8de5ba6b4a59 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
- if (control & PCI_MSI_FLAGS_64BIT)
+ if (control & PCI_MSI_FLAGS_64BIT) {
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
- else
+ } else {
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
+ dev->no_64bit_msi = 1;
+ }
/* Save the initial mask status */
if (entry->msi_attrib.maskbit)
@@ -602,8 +604,9 @@ static int msi_verify_entries(struct pci_dev *dev)
for_each_pci_msi_entry(entry, dev) {
if (!dev->no_64bit_msi || !entry->msg.address_hi)
continue;
- pci_err(dev, "Device has broken 64-bit MSI but arch"
- " tried to assign one above 4G\n");
+ pci_err(dev, "Device has either broken 64-bit MSI or "
+ "only 32-bit MSI support but "
+ "arch tried to assign one above 4G\n");
return -EIO;
}
return 0;
--
2.17.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH V2] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-11-24 10:50 ` [PATCH V2] " Vidya Sagar
@ 2020-12-03 5:00 ` Vidya Sagar
2020-12-03 18:24 ` Bjorn Helgaas
1 sibling, 0 replies; 9+ messages in thread
From: Vidya Sagar @ 2020-12-03 5:00 UTC (permalink / raw)
To: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh
Cc: linux-pci, linux-kernel, kthota, mmaddireddy, sagar.tv
Hi Bjorn,
Do you have any further comments for this patch?
Thanks,
Vidya Sagar
On 11/24/2020 4:20 PM, Vidya Sagar wrote:
> There are devices (Ex:- Marvell SATA controller) that don't support
> 64-bit MSIs and the same is advertised through their MSI capability
> register. Set no_64bit_msi flag explicitly for such devices in the
> MSI setup code so that the msi_verify_entries() API would catch
> if the MSI arch code tries to use 64-bit MSI.
>
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> V2:
> * Addressed Bjorn's comment and changed the error message
>
> drivers/pci/msi.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index d52d118979a6..8de5ba6b4a59 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
> entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
> entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
>
> - if (control & PCI_MSI_FLAGS_64BIT)
> + if (control & PCI_MSI_FLAGS_64BIT) {
> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
> - else
> + } else {
> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
> + dev->no_64bit_msi = 1;
> + }
>
> /* Save the initial mask status */
> if (entry->msi_attrib.maskbit)
> @@ -602,8 +604,9 @@ static int msi_verify_entries(struct pci_dev *dev)
> for_each_pci_msi_entry(entry, dev) {
> if (!dev->no_64bit_msi || !entry->msg.address_hi)
> continue;
> - pci_err(dev, "Device has broken 64-bit MSI but arch"
> - " tried to assign one above 4G\n");
> + pci_err(dev, "Device has either broken 64-bit MSI or "
> + "only 32-bit MSI support but "
> + "arch tried to assign one above 4G\n");
> return -EIO;
> }
> return 0;
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V2] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-11-24 10:50 ` [PATCH V2] " Vidya Sagar
2020-12-03 5:00 ` Vidya Sagar
@ 2020-12-03 18:24 ` Bjorn Helgaas
2020-12-03 19:03 ` Vidya Sagar
1 sibling, 1 reply; 9+ messages in thread
From: Bjorn Helgaas @ 2020-12-03 18:24 UTC (permalink / raw)
To: Vidya Sagar
Cc: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh,
linux-pci, linux-kernel, kthota, mmaddireddy, sagar.tv
On Tue, Nov 24, 2020 at 04:20:35PM +0530, Vidya Sagar wrote:
> There are devices (Ex:- Marvell SATA controller) that don't support
> 64-bit MSIs and the same is advertised through their MSI capability
> register. Set no_64bit_msi flag explicitly for such devices in the
> MSI setup code so that the msi_verify_entries() API would catch
> if the MSI arch code tries to use 64-bit MSI.
This seems good to me. I'll post a possible revision to set
dev->no_64bit_msi in the device enumeration path instead of in the IRQ
allocation path, since it's really a property of the device, not of
the msi_desc.
I like the extra checking this gives us. Was this prompted by
tripping over something, or is it something you noticed by code
reading? If the former, a hint about what was wrong and how it's
being fixed would be useful.
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
> V2:
> * Addressed Bjorn's comment and changed the error message
>
> drivers/pci/msi.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index d52d118979a6..8de5ba6b4a59 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
> entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
> entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
>
> - if (control & PCI_MSI_FLAGS_64BIT)
> + if (control & PCI_MSI_FLAGS_64BIT) {
> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
> - else
> + } else {
> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
> + dev->no_64bit_msi = 1;
> + }
>
> /* Save the initial mask status */
> if (entry->msi_attrib.maskbit)
> @@ -602,8 +604,9 @@ static int msi_verify_entries(struct pci_dev *dev)
> for_each_pci_msi_entry(entry, dev) {
> if (!dev->no_64bit_msi || !entry->msg.address_hi)
> continue;
> - pci_err(dev, "Device has broken 64-bit MSI but arch"
> - " tried to assign one above 4G\n");
> + pci_err(dev, "Device has either broken 64-bit MSI or "
> + "only 32-bit MSI support but "
> + "arch tried to assign one above 4G\n");
> return -EIO;
> }
> return 0;
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V2] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-12-03 18:24 ` Bjorn Helgaas
@ 2020-12-03 19:03 ` Vidya Sagar
2020-12-03 19:54 ` Bjorn Helgaas
0 siblings, 1 reply; 9+ messages in thread
From: Vidya Sagar @ 2020-12-03 19:03 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh,
linux-pci, linux-kernel, kthota, mmaddireddy, sagar.tv
On 12/3/2020 11:54 PM, Bjorn Helgaas wrote:
> External email: Use caution opening links or attachments
>
>
> On Tue, Nov 24, 2020 at 04:20:35PM +0530, Vidya Sagar wrote:
>> There are devices (Ex:- Marvell SATA controller) that don't support
>> 64-bit MSIs and the same is advertised through their MSI capability
>> register. Set no_64bit_msi flag explicitly for such devices in the
>> MSI setup code so that the msi_verify_entries() API would catch
>> if the MSI arch code tries to use 64-bit MSI.
>
> This seems good to me. I'll post a possible revision to set
> dev->no_64bit_msi in the device enumeration path instead of in the IRQ
> allocation path, since it's really a property of the device, not of
> the msi_desc.
>
> I like the extra checking this gives us. Was this prompted by
> tripping over something, or is it something you noticed by code
> reading? If the former, a hint about what was wrong and how it's
> being fixed would be useful.
I observed functionality issue with Marvell SATA controller (1b4b:9171)
when the allocated MSI target address was a 64-bit address. I mentioned
the Marvell SATA controller as an example in the commit message.
Thanks,
Vidya Sagar
>
>> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
>> ---
>> V2:
>> * Addressed Bjorn's comment and changed the error message
>>
>> drivers/pci/msi.c | 11 +++++++----
>> 1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index d52d118979a6..8de5ba6b4a59 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
>> @@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
>> entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
>> entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
>>
>> - if (control & PCI_MSI_FLAGS_64BIT)
>> + if (control & PCI_MSI_FLAGS_64BIT) {
>> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
>> - else
>> + } else {
>> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
>> + dev->no_64bit_msi = 1;
>> + }
>>
>> /* Save the initial mask status */
>> if (entry->msi_attrib.maskbit)
>> @@ -602,8 +604,9 @@ static int msi_verify_entries(struct pci_dev *dev)
>> for_each_pci_msi_entry(entry, dev) {
>> if (!dev->no_64bit_msi || !entry->msg.address_hi)
>> continue;
>> - pci_err(dev, "Device has broken 64-bit MSI but arch"
>> - " tried to assign one above 4G\n");
>> + pci_err(dev, "Device has either broken 64-bit MSI or "
>> + "only 32-bit MSI support but "
>> + "arch tried to assign one above 4G\n");
>> return -EIO;
>> }
>> return 0;
>> --
>> 2.17.1
>>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V2] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-12-03 19:03 ` Vidya Sagar
@ 2020-12-03 19:54 ` Bjorn Helgaas
2020-12-04 2:28 ` Vidya Sagar
0 siblings, 1 reply; 9+ messages in thread
From: Bjorn Helgaas @ 2020-12-03 19:54 UTC (permalink / raw)
To: Vidya Sagar
Cc: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh,
linux-pci, linux-kernel, kthota, mmaddireddy, sagar.tv
On Fri, Dec 04, 2020 at 12:33:45AM +0530, Vidya Sagar wrote:
> On 12/3/2020 11:54 PM, Bjorn Helgaas wrote:
> > On Tue, Nov 24, 2020 at 04:20:35PM +0530, Vidya Sagar wrote:
> > > There are devices (Ex:- Marvell SATA controller) that don't support
> > > 64-bit MSIs and the same is advertised through their MSI capability
> > > register. Set no_64bit_msi flag explicitly for such devices in the
> > > MSI setup code so that the msi_verify_entries() API would catch
> > > if the MSI arch code tries to use 64-bit MSI.
> >
> > This seems good to me. I'll post a possible revision to set
> > dev->no_64bit_msi in the device enumeration path instead of in the IRQ
> > allocation path, since it's really a property of the device, not of
> > the msi_desc.
> >
> > I like the extra checking this gives us. Was this prompted by
> > tripping over something, or is it something you noticed by code
> > reading? If the former, a hint about what was wrong and how it's
> > being fixed would be useful.
> I observed functionality issue with Marvell SATA controller (1b4b:9171) when
> the allocated MSI target address was a 64-bit address. I mentioned the
> Marvell SATA controller as an example in the commit message.
I know you mentioned the Marvell controller, but apparently that
device is working perfectly correctly: it does not support 64-bit MSI,
and it does not advertise support for 64-bit MSI.
So if there's a functionality issue, that means something is wrong in
Linux that caused us to assign a 64-bit MSI address to it. *That*
issue is what I want to know about. Your patch only warns about the
issue; it doesn't fix it.
I don't think there's any point in specifically mentioning the Marvell
device if it is working correctly, because the same issue should
affect *any* device that doesn't support 64-bit MSI. But if there's
some arch code that incorrectly assigns a 64-bit address, it would
definitely be useful to specify the arch. And hopefully there's a fix
for that arch code, too.
> > > Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> > > ---
> > > V2:
> > > * Addressed Bjorn's comment and changed the error message
> > >
> > > drivers/pci/msi.c | 11 +++++++----
> > > 1 file changed, 7 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> > > index d52d118979a6..8de5ba6b4a59 100644
> > > --- a/drivers/pci/msi.c
> > > +++ b/drivers/pci/msi.c
> > > @@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
> > > entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
> > > entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
> > >
> > > - if (control & PCI_MSI_FLAGS_64BIT)
> > > + if (control & PCI_MSI_FLAGS_64BIT) {
> > > entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
> > > - else
> > > + } else {
> > > entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
> > > + dev->no_64bit_msi = 1;
> > > + }
> > >
> > > /* Save the initial mask status */
> > > if (entry->msi_attrib.maskbit)
> > > @@ -602,8 +604,9 @@ static int msi_verify_entries(struct pci_dev *dev)
> > > for_each_pci_msi_entry(entry, dev) {
> > > if (!dev->no_64bit_msi || !entry->msg.address_hi)
> > > continue;
> > > - pci_err(dev, "Device has broken 64-bit MSI but arch"
> > > - " tried to assign one above 4G\n");
> > > + pci_err(dev, "Device has either broken 64-bit MSI or "
> > > + "only 32-bit MSI support but "
> > > + "arch tried to assign one above 4G\n");
> > > return -EIO;
> > > }
> > > return 0;
> > > --
> > > 2.17.1
> > >
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH V2] PCI/MSI: Set device flag indicating only 32-bit MSI support
2020-12-03 19:54 ` Bjorn Helgaas
@ 2020-12-04 2:28 ` Vidya Sagar
0 siblings, 0 replies; 9+ messages in thread
From: Vidya Sagar @ 2020-12-04 2:28 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: bhelgaas, lorenzo.pieralisi, thierry.reding, jonathanh,
linux-pci, linux-kernel, kthota, mmaddireddy, sagar.tv
On 12/4/2020 1:24 AM, Bjorn Helgaas wrote:
> External email: Use caution opening links or attachments
>
>
> On Fri, Dec 04, 2020 at 12:33:45AM +0530, Vidya Sagar wrote:
>> On 12/3/2020 11:54 PM, Bjorn Helgaas wrote:
>>> On Tue, Nov 24, 2020 at 04:20:35PM +0530, Vidya Sagar wrote:
>>>> There are devices (Ex:- Marvell SATA controller) that don't support
>>>> 64-bit MSIs and the same is advertised through their MSI capability
>>>> register. Set no_64bit_msi flag explicitly for such devices in the
>>>> MSI setup code so that the msi_verify_entries() API would catch
>>>> if the MSI arch code tries to use 64-bit MSI.
>>>
>>> This seems good to me. I'll post a possible revision to set
>>> dev->no_64bit_msi in the device enumeration path instead of in the IRQ
>>> allocation path, since it's really a property of the device, not of
>>> the msi_desc.
>>>
>>> I like the extra checking this gives us. Was this prompted by
>>> tripping over something, or is it something you noticed by code
>>> reading? If the former, a hint about what was wrong and how it's
>>> being fixed would be useful.
>> I observed functionality issue with Marvell SATA controller (1b4b:9171) when
>> the allocated MSI target address was a 64-bit address. I mentioned the
>> Marvell SATA controller as an example in the commit message.
>
> I know you mentioned the Marvell controller, but apparently that
> device is working perfectly correctly: it does not support 64-bit MSI,
> and it does not advertise support for 64-bit MSI.
>
> So if there's a functionality issue, that means something is wrong in
> Linux that caused us to assign a 64-bit MSI address to it. *That*
> issue is what I want to know about. Your patch only warns about the
> issue; it doesn't fix it.
The issue is in the DWC code. I pushed a generic patch to fix that issue
by specifying the limit of MSI target address to 32-bit region. Patch is
up for review at
http://patchwork.ozlabs.org/project/linux-pci/patch/20201117165312.25847-1-vidyas@nvidia.com/
>
> I don't think there's any point in specifically mentioning the Marvell
> device if it is working correctly, because the same issue should
> affect *any* device that doesn't support 64-bit MSI. But if there's
> some arch code that incorrectly assigns a 64-bit address, it would
> definitely be useful to specify the arch. And hopefully there's a fix
> for that arch code, too.
>
>>>> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
>>>> ---
>>>> V2:
>>>> * Addressed Bjorn's comment and changed the error message
>>>>
>>>> drivers/pci/msi.c | 11 +++++++----
>>>> 1 file changed, 7 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>>>> index d52d118979a6..8de5ba6b4a59 100644
>>>> --- a/drivers/pci/msi.c
>>>> +++ b/drivers/pci/msi.c
>>>> @@ -581,10 +581,12 @@ msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd)
>>>> entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
>>>> entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
>>>>
>>>> - if (control & PCI_MSI_FLAGS_64BIT)
>>>> + if (control & PCI_MSI_FLAGS_64BIT) {
>>>> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
>>>> - else
>>>> + } else {
>>>> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32;
>>>> + dev->no_64bit_msi = 1;
>>>> + }
>>>>
>>>> /* Save the initial mask status */
>>>> if (entry->msi_attrib.maskbit)
>>>> @@ -602,8 +604,9 @@ static int msi_verify_entries(struct pci_dev *dev)
>>>> for_each_pci_msi_entry(entry, dev) {
>>>> if (!dev->no_64bit_msi || !entry->msg.address_hi)
>>>> continue;
>>>> - pci_err(dev, "Device has broken 64-bit MSI but arch"
>>>> - " tried to assign one above 4G\n");
>>>> + pci_err(dev, "Device has either broken 64-bit MSI or "
>>>> + "only 32-bit MSI support but "
>>>> + "arch tried to assign one above 4G\n");
>>>> return -EIO;
>>>> }
>>>> return 0;
>>>> --
>>>> 2.17.1
>>>>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-12-04 2:29 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-17 14:57 [PATCH] PCI/MSI: Set device flag indicating only 32-bit MSI support Vidya Sagar
2020-11-20 21:30 ` Bjorn Helgaas
2020-11-24 3:57 ` Vidya Sagar
2020-11-24 10:50 ` [PATCH V2] " Vidya Sagar
2020-12-03 5:00 ` Vidya Sagar
2020-12-03 18:24 ` Bjorn Helgaas
2020-12-03 19:03 ` Vidya Sagar
2020-12-03 19:54 ` Bjorn Helgaas
2020-12-04 2:28 ` Vidya Sagar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.