Description: This trigger page is used store information about MPI (IOC Status & LogInfo) triggers. Driver Persistent Trigger Page-4 format: ------------------------------------------------------- | 31 24 23 16 15 8 7 0| Byte ------------------------------------------------------- | PageType | PageNumber | Reserved | PageVersion | 0x00 -------------------------------------------------------- | Reserved | ExtPageType | ExtPageLength | 0x04 -------------------------------------------------------- | Reserved | NumMpiTriggerEntries | 0x08 -------------------------------------------------------- | MPITriggerEntry[0] | 0x0C -------------------------------------------------------- | … | -------------------------------------------------------- | MPITriggerEntry[19] | 0xA4 -------------------------------------------------------- NumMpiTriggerEntries: This field indicates number of MPI (IOC Status & LogInfo) trigger entries stored in this page. Currently driver is supporting a maximum of 20-MPI trigger entries. MPITriggerEntry: ----------------------------------------------------- | 31 16 15 0 | ----------------------------------------------------- | Reserved | IOCStatus | ----------------------------------------------------- | IOCLogInfo | ----------------------------------------------------- IOCStatus => Status value from the IOC IOCLogInfo => Specific value that supplements the IOCStatus. During driver load: If MPI trigger type bit is enabled in the Persistent Trigger Page0 then read the Persistent Trigger Page4 and update the ioc instances diag_trigger_mpi.MPITriggerEntry with Persistent Trigger Page4's MPITriggerEntries. This will restores the MPI trigger type's triggers which are enabled before. When user modifies the MPI trigger type triggers: When user sets/clears the MPI trigger type triggers then driver fisrt checks whether IOC firmware supports trigger pages support or not. if firmware supports these pages then driver enables the MPI trigger type bit in Persistent Trigger Page0 (if it was not enabled before) and updates the user provided trigger values in Persistent Trigger Page4. Signed-off-by: Suganath Prabu S --- drivers/scsi/mpt3sas/mpt3sas_base.c | 61 +++++++++- drivers/scsi/mpt3sas/mpt3sas_base.h | 3 + drivers/scsi/mpt3sas/mpt3sas_config.c | 158 ++++++++++++++++++++++++++ 3 files changed, 221 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 75c0c64..ee86124 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4899,6 +4899,59 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _base_get_mpi_diag_triggers - get mpi diag trigger values from + * persistent pages + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26DriverTriggerPage4_t trigger_pg4; + struct SL_WH_MPI_TRIGGER_T *status_tg; + MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY *mpi_status_tg; + Mpi2ConfigReply_t mpi_reply; + int r = 0, i = 0; + u16 count = 0; + u16 ioc_status; + + r = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply, + &trigger_pg4); + if (r) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dinitprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return; + } + + if (le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger)) { + count = le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger); + count = min_t(u16, NUM_VALID_ENTRIES, count); + ioc->diag_trigger_mpi.ValidEntries = count; + + status_tg = &ioc->diag_trigger_mpi.MPITriggerEntry[0]; + mpi_status_tg = &trigger_pg4.IOCStatusLoginfoTriggers[0]; + + for (i = 0; i < count; i++) { + status_tg->IOCStatus = le16_to_cpu( + mpi_status_tg->IOCStatus); + status_tg->IocLogInfo = le32_to_cpu( + mpi_status_tg->LogInfo); + + status_tg++; + mpi_status_tg++; + } + } +} + /** * _base_get_master_diag_triggers - get master diag trigger values from * persistent pages @@ -5011,7 +5064,13 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) if ((u16)trigger_flags & MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID) _base_get_scsi_diag_triggers(ioc); - + /* + * Retrieve mpi error diag trigger values from driver trigger pg4 + * if loginfo trigger bit enabled in TriggerFlags. + */ + if ((u16)trigger_flags & + MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID) + _base_get_mpi_diag_triggers(ioc); } /** diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 6c3bc50..6745d79 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1831,6 +1831,9 @@ mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, int mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page); +int +mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page); /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 98b6a59..c3aaaab 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -2344,6 +2344,164 @@ out: return rc; } +/** + * mpt3sas_config_get_driver_trigger_pg4 - obtain driver trigger page 4 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 4; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_driver_trigger_pg4 - write driver trigger page 4 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +_config_set_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 4; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_update_driver_trigger_pg4 - update driver trigger page 4 + * @ioc: per adapter object + * @trigger_flags: trigger type bit map + * @set: set ot clear trigger values + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set) +{ + Mpi26DriverTriggerPage4_t tg_pg4; + Mpi2ConfigReply_t mpi_reply; + int rc, i, count; + u16 ioc_status; + + rc = mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID, set); + if (rc) + return rc; + + rc = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + if (set) { + count = mpi_tg->ValidEntries; + tg_pg4.NumIOCStatusLogInfoTrigger = cpu_to_le16(count); + for (i = 0; i < count; i++) { + tg_pg4.IOCStatusLoginfoTriggers[i].IOCStatus = + cpu_to_le16(mpi_tg->MPITriggerEntry[i].IOCStatus); + tg_pg4.IOCStatusLoginfoTriggers[i].LogInfo = + cpu_to_le32(mpi_tg->MPITriggerEntry[i].IocLogInfo); + } + } else { + tg_pg4.NumIOCStatusLogInfoTrigger = 0; + memset(&tg_pg4.IOCStatusLoginfoTriggers[0], 0, + NUM_VALID_ENTRIES * sizeof( + MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY)); + } + + rc = _config_set_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + return 0; + +out: + mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID, !set); + + return rc; +} + /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components -- 2.18.4