All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Prabhakar <prabhakar.csengg@gmail.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes
Date: Thu, 26 Nov 2020 14:40:30 +0100	[thread overview]
Message-ID: <20201126134031.4115211-2-geert@linux-m68k.org> (raw)
In-Reply-To: <20201126134031.4115211-1-geert@linux-m68k.org>

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The camera daughter board can also be connected to 8-bit ov7725 sensors,
so in preparation for configurable option to choose depending on the
camera's connected separate out the ov5640 nodes in a dtsi file.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
v4:
  - Describe a single camera in the .dtsi file,
  - Include the .dtsi multiple times,

 .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts    | 151 +++++++++---------
 .../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi |  30 ++++
 2 files changed, 103 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,67 +91,12 @@ &hscif0 {
 	status = "okay";
 };
 
-&i2c0 {
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam1>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_0: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin0ep>;
-			};
-		};
-	};
-};
-
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
 	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam2>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_1: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin1ep>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam3>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_2: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin2ep>;
-			};
-		};
-	};
 };
 
 &i2c3 {
@@ -160,23 +105,6 @@ &i2c3 {
 
 	status = "okay";
 	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam4>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_3: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin3ep>;
-			};
-		};
-	};
 };
 
 &pfc {
@@ -267,6 +195,21 @@ &scifb1 {
 	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
 };
 
+/*
+ * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
+ *
+ * Uncomment the #include statements to change configuration
+ */
+
+/* 8bit CMOS Camera 1 (J13) */
+#define CAM_PARENT_I2C		i2c0
+#define MCLK_CAM		mclk_cam1
+#define CAM_EP			cam0ep
+#define VIN_EP			vin0ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin0 {
 	/*
 	 * Set SW2 switch on the SOM to 'ON'
@@ -278,13 +221,28 @@ &vin0 {
 
 	port {
 		vin0ep: endpoint {
-			remote-endpoint = <&ov5640_0>;
+			remote-endpoint = <&cam0ep>;
 			bus-width = <8>;
 			bus-type = <6>;
 		};
 	};
 };
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 2 (J14) */
+#define CAM_PARENT_I2C		i2c1
+#define MCLK_CAM		mclk_cam2
+#define CAM_EP			cam1ep
+#define VIN_EP			vin1ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin1 {
 	/* Set SW1 switch on the SOM to 'ON' */
 	status = "okay";
@@ -293,13 +251,29 @@ &vin1 {
 
 	port {
 		vin1ep: endpoint {
-			remote-endpoint = <&ov5640_1>;
+			remote-endpoint = <&cam1ep>;
 			bus-width = <8>;
 			bus-type = <6>;
 		};
 	};
 };
 
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 3 (J12) */
+#define CAM_PARENT_I2C		i2c2
+#define MCLK_CAM		mclk_cam3
+#define CAM_EP			cam2ep
+#define VIN_EP			vin2ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin2 {
 	status = "okay";
 	pinctrl-0 = <&vin2_pins>;
@@ -307,14 +281,29 @@ &vin2 {
 
 	port {
 		vin2ep: endpoint {
-			remote-endpoint = <&ov5640_2>;
+			remote-endpoint = <&cam2ep>;
 			bus-width = <8>;
 			data-shift = <8>;
 			bus-type = <6>;
 		};
 	};
 };
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 4 (J11) */
+#define CAM_PARENT_I2C		i2c3
+#define MCLK_CAM		mclk_cam4
+#define CAM_EP			cam3ep
+#define VIN_EP			vin3ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin3 {
 	status = "okay";
 	pinctrl-0 = <&vin3_pins>;
@@ -322,9 +311,15 @@ &vin3 {
 
 	port {
 		vin3ep: endpoint {
-			remote-endpoint = <&ov5640_3>;
+			remote-endpoint = <&cam3ep>;
 			bus-width = <8>;
 			bus-type = <6>;
 		};
 	};
 };
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
new file mode 100644
index 0000000000000000..408016620f5b1a04
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties a VIN interface with a single ov5640 sensor on
+ * the iWave-RZ/G1H Qseven board development platform connected with the
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define CAM_ENABLED	1
+
+&CAM_PARENT_I2C {
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&MCLK_CAM>;
+		clock-names = "xclk";
+		status = "okay";
+
+		port {
+			CAM_EP: endpoint {
+				bus-width = <8>;
+				data-shift = <2>;
+				bus-type = <6>;
+				pclk-sample = <1>;
+				remote-endpoint = <&VIN_EP>;
+			};
+		};
+	};
+};
-- 
2.25.1


  reply	other threads:[~2020-11-26 14:20 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-26 13:40 [PATCH v4 0/2] ARM: dts: r8a7742-iwg21d-q7-dbcm: Add support for ov7725 sensors Geert Uytterhoeven
2020-11-26 13:40 ` Geert Uytterhoeven [this message]
2020-11-26 17:42   ` [PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes Prabhakar Mahadev Lad
2020-11-30  9:15   ` Geert Uytterhoeven
2020-12-15 17:22   ` Jacopo Mondi
2020-11-26 13:40 ` [PATCH v4 2/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensors Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201126134031.4115211-2-geert@linux-m68k.org \
    --to=geert@linux-m68k.org \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.