From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Sun, 29 Nov 2020 17:51:38 +0100 Subject: [PATCH 09/13] arm: omap3: Compile lowlevel_init() function only when it is used In-Reply-To: <20201129164618.5829-1-pali@kernel.org> References: <20201129164618.5829-1-pali@kernel.org> Message-ID: <20201129165142.6136-1-pali@kernel.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Function lowlevel_init() is called only from cpu_init_crit() and this function is wrapped into #if .. #endif section. So compile also lowlevel_init() function under same #if condition. Signed-off-by: Pali Roh?r --- arch/arm/mach-omap2/omap3/lowlevel_init.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap3/lowlevel_init.S b/arch/arm/mach-omap2/omap3/lowlevel_init.S index 2a05b5e521..4fa89418a1 100644 --- a/arch/arm/mach-omap2/omap3/lowlevel_init.S +++ b/arch/arm/mach-omap2/omap3/lowlevel_init.S @@ -45,7 +45,7 @@ ENDPROC(do_omap3_emu_romcode_call) ENTRY(cpy_clk_code) /* Copy DPLL code into SRAM */ adr r0, go_to_speed /* copy from start of go_to_speed... */ - adr r2, lowlevel_init /* ... up to start of low_level_init */ + adr r2, go_to_speed_end /* ... up to start of go_to_speed_end */ next2: ldmia r0!, {r3 - r10} /* copy from source address [r0] */ stmia r1!, {r3 - r10} /* copy to target address [r1] */ @@ -167,8 +167,11 @@ pll_div_add5: pll_div_val5: .word CLSEL1_EMU_VAL +go_to_speed_end: #endif +#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && \ + !defined(CONFIG_SKIP_LOWLEVEL_INIT_ONLY) ENTRY(lowlevel_init) ldr sp, SRAM_STACK str ip, [sp] /* stash ip register */ @@ -187,6 +190,7 @@ ENTRY(lowlevel_init) b s_init ENDPROC(lowlevel_init) +#endif /* the literal pools origin */ .ltorg -- 2.20.1