Re: [Regression] Can only do S3 once after "tpm: take TPM chip power gating out of tpm_transmit()"

[Jarkko Sakkinen <jarkko@kernel.org>]

On Thu, Dec 10, 2020 at 12:23:57PM +0800, Kai-Heng Feng wrote:
> 
> 
> > On Dec 8, 2020, at 18:17, Jarkko Sakkinen <jarkko@kernel.org> wrote:
> > 
> > On Mon, Dec 07, 2020 at 12:42:53PM +0800, Kai-Heng Feng wrote:
> >> Hi Jarkko,
> >> 
> >> A user report that the system can only do S3 once. Subsequent S3 fails after commit a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()").
> >> 
> >> Dmesg with the issue, collected under 5.10-rc2:
> >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891502/comments/14
> >> 
> >> Dmesg without the issue, collected under 5.0.0-rc8:
> >> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891502/comments/16
> >> 
> >> Full bug report here:
> >> https://bugs.launchpad.net/bugs/1891502
> >> 
> >> Kai-Heng
> > 
> > Relevant part:
> > 
> > 
> > [80601.620149] tpm tpm0: Error (28) sending savestate before suspend
> > [80601.620165] PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x90 returns 28
> > [80601.620172] PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x20 returns 28
> > [80601.620178] PM: Device 00:01 failed to suspend: error 28
> > 
> > Looking at this there are two issues:
> > 
> > A. TPM_ORD_SAVESTATE command failing, this a new regression.
> > B. When tpm_pm_suspend() fails, it should not fail the whole suspend
> >   procedure. And it returns the TPM error code back to the upper
> >   layers when it does so, which makes no sense. This is an old
> >   issue revealed by A.
> > 
> > Let's look at tpm_pm_suspend():
> > 
> > /*
> > * We are about to suspend. Save the TPM state
> > * so that it can be restored.
> > */
> > int tpm_pm_suspend(struct device *dev)
> > {
> > 	struct tpm_chip *chip = dev_get_drvdata(dev);
> > 	int rc = 0;
> > 
> > 	if (!chip)
> > 		return -ENODEV;
> > 
> > 	if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
> > 		goto suspended;
> > 
> > 	if ((chip->flags & TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED) &&
> > 	    !pm_suspend_via_firmware())
> > 		goto suspended;
> > 
> > 	if (!tpm_chip_start(chip)) {
> > 		if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > 			tpm2_shutdown(chip, TPM2_SU_STATE);
> > 		else
> > 			rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
> > 
> > 		tpm_chip_stop(chip);
> > 	}
> > 
> > suspended:
> > 	return rc;
> > }
> > EXPORT_SYMBOL_GPL(tpm_pm_suspend);
> > 
> > I would modify this into:
> > 
> > /*
> > * We are about to suspend. Save the TPM state
> > * so that it can be restored.
> > */
> > int tpm_pm_suspend(struct device *dev)
> > {
> > 	struct tpm_chip *chip = dev_get_drvdata(dev);
> > 	int rc = 0;
> > 
> > 	if (!chip)
> > 		return -ENODEV;
> > 
> > 	if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
> > 		goto suspended;
> > 
> > 	if ((chip->flags & TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED) &&
> > 	    !pm_suspend_via_firmware())
> > 		goto suspended;
> > 
> > 	if (!tpm_chip_start(chip)) {
> > 		if (chip->flags & TPM_CHIP_FLAG_TPM2)
> > 			tpm2_shutdown(chip, TPM2_SU_STATE);
> > 		else
> > 			tpm1_pm_suspend(chip, tpm_suspend_pcr);
> > 
> > 		tpm_chip_stop(chip);
> > 	}
> > 
> > suspended:
> > 	return rc;
> > }
> > EXPORT_SYMBOL_GPL(tpm_pm_suspend);
> > 
> > I.e. it's a good idea to put something into klog but that should not
> > fail the whole suspend procedure. TPM is essentially opt-in feature.
> > 
> > Of course issue A needs to be also sorted out but would this work as
> > a quick initial fix? I can queue a patch for this. Is it possible to
> > try out this fix for if I drop a patch?
> 
> Yes, possible test result from affected user.
> 
> I had to cut those code and do a diff side by side to find what changed.
> Hopefully next time I can get one from `git diff`...
> 
> Kai-Heng

Yes you can. Sorry about that.

/Jarkko