All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
	asutoshd@codeaurora.org, jejb@linux.ibm.com,
	martin.petersen@oracle.com, stanley.chu@mediatek.com,
	beanhuo@micron.com, bvanassche@acm.org, tomas.winkler@intel.com,
	cang@codeaurora.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 6/6] scsi: ufs: Keep device active mode only fWriteBoosterBufferFlushDuringHibernate == 1
Date: Fri, 11 Dec 2020 15:00:35 +0100	[thread overview]
Message-ID: <20201211140035.20016-7-huobean@gmail.com> (raw)
In-Reply-To: <20201211140035.20016-1-huobean@gmail.com>

From: Bean Huo <beanhuo@micron.com>

According to the JEDEC UFS 3.1 Spec, If fWriteBoosterBufferFlushDuringHibernate
is set to one, the device flushes the WriteBooster Buffer data automatically
whenever the link enters the hibernate (HIBERN8) state. While the flushing
operation is in progress, the device should be kept in Active power mode.
Currently, we set this flag during the UFSHCD probe stage, but we didn't deal
with its programming failure. Even this failure is less likely to occur, but
still it is possible.
This patch is to add checkup of fWriteBoosterBufferFlushDuringHibernate setting,
keep the device as "active power mode" only when this flag be successfully set
to 1.

Fixes: 51dd905bd2f6 ("scsi: ufs: Fix WriteBooster flush during runtime suspend")
Signed-off-by: Bean Huo <beanhuo@micron.com>
---
 drivers/scsi/ufs/ufs.h    |  1 +
 drivers/scsi/ufs/ufshcd.c | 21 ++++++++++++++++-----
 2 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 8ed342e43883..1b3866f608d9 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -542,6 +542,7 @@ struct ufs_dev_info {
 	/* UFS WB related flags */
 	bool	wb_enabled;
 	bool	wb_buf_flush_enabled;
+	bool	wb_buf_flush_in_hibern8;
 	u8	wb_dedicated_lu;
 	u8	b_wb_buffer_type;
 
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index fb3c98724005..7ff486f047d8 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -282,10 +282,16 @@ static inline void ufshcd_wb_config(struct ufs_hba *hba)
 		dev_err(hba->dev, "%s: Enable WB failed: %d\n", __func__, ret);
 	else
 		dev_info(hba->dev, "%s: Write Booster Configured\n", __func__);
+
 	ret = ufshcd_wb_toggle_flush_during_h8(hba, true);
-	if (ret)
+	if (ret) {
 		dev_err(hba->dev, "%s: En WB flush during H8: failed: %d\n",
 			__func__, ret);
+		hba->dev_info.wb_buf_flush_in_hibern8 = false;
+	} else {
+		hba->dev_info.wb_buf_flush_in_hibern8 = true;
+	}
+
 	ufshcd_wb_toggle_flush(hba, true);
 }
 
@@ -589,6 +595,7 @@ static void ufshcd_device_reset(struct ufs_hba *hba)
 		if (ufshcd_is_wb_allowed(hba)) {
 			hba->dev_info.wb_enabled = false;
 			hba->dev_info.wb_buf_flush_enabled = false;
+			hba->dev_info.wb_buf_flush_in_hibern8 = false;
 		}
 	}
 	if (err != -EOPNOTSUPP)
@@ -5471,6 +5478,7 @@ static bool ufshcd_wb_need_flush(struct ufs_hba *hba)
 
 	if (!ufshcd_is_wb_allowed(hba))
 		return false;
+
 	/*
 	 * The ufs device needs the vcc to be ON to flush.
 	 * With user-space reduction enabled, it's enough to enable flush
@@ -8571,6 +8579,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	enum ufs_pm_level pm_lvl;
 	enum ufs_dev_pwr_mode req_dev_pwr_mode;
 	enum uic_link_state req_link_state;
+	bool hibern8;
 
 	hba->pm_op_in_progress = 1;
 	if (!ufshcd_is_shutdown_pm(pm_op)) {
@@ -8630,11 +8639,13 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 		 * Hibern8, keep device power mode as "active power mode"
 		 * and VCC supply.
 		 */
+		hibern8 = req_link_state == UIC_LINK_HIBERN8_STATE ||
+			(req_link_state == UIC_LINK_ACTIVE_STATE &&
+			 ufshcd_is_auto_hibern8_enabled(hba));
+
 		hba->dev_info.b_rpm_dev_flush_capable =
-			hba->auto_bkops_enabled ||
-			(((req_link_state == UIC_LINK_HIBERN8_STATE) ||
-			((req_link_state == UIC_LINK_ACTIVE_STATE) &&
-			ufshcd_is_auto_hibern8_enabled(hba))) &&
+			hba->auto_bkops_enabled || (hibern8 &&
+			hba->dev_info.wb_buf_flush_in_hibern8 &&
 			ufshcd_wb_need_flush(hba));
 	}
 
-- 
2.17.1


      parent reply	other threads:[~2020-12-11 14:03 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-11 14:00 [PATCH v4 0/6] Several changes for UFS WriteBooster Bean Huo
2020-12-11 14:00 ` [PATCH v4 1/6] scsi: ufs: Add "wb_on" sysfs node to control WB on/off Bean Huo
2020-12-15 10:32   ` Greg KH
2020-12-15 19:56     ` Bean Huo
2020-12-11 14:00 ` [PATCH v4 2/6] scsi: ufs: Changes comment in the function ufshcd_wb_probe() Bean Huo
2020-12-11 14:00 ` [PATCH v4 3/6] scsi: ufs: Group UFS WB related flags to struct ufs_dev_info Bean Huo
2020-12-15  9:01   ` Stanley Chu
2020-12-15  9:42     ` Bean Huo
2020-12-15 10:11       ` Stanley Chu
2020-12-11 14:00 ` [PATCH v4 4/6] scsi: ufs: Remove d_wb_alloc_units from " Bean Huo
2020-12-15  8:57   ` Stanley Chu
2020-12-15  9:59     ` Bean Huo
2020-12-11 14:00 ` [PATCH v4 5/6] scsi: ufs: Cleanup WB buffer flush toggle implementation Bean Huo
2020-12-15  9:07   ` Stanley Chu
2020-12-15  9:28     ` Bean Huo
2020-12-11 14:00 ` Bean Huo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201211140035.20016-7-huobean@gmail.com \
    --to=huobean@gmail.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=jejb@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stanley.chu@mediatek.com \
    --cc=tomas.winkler@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.