From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Maxime Ripard <mripard@kernel.org>,
Vinod Koul <vkoul@kernel.org>, Guenter Roeck <linux@roeck-us.net>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Jingoo Han <jingoohan1@gmail.com>, Pavel Machek <pavel@ucw.cz>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Sebastian Reichel <sre@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Brown <broonie@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH] dt-bindings: Fix JSON pointers
Date: Thu, 17 Dec 2020 16:34:29 -0600 [thread overview]
Message-ID: <20201217223429.354283-1-robh@kernel.org> (raw)
The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpretted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.
Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/arm/idle-states.yaml | 2 +-
.../bus/allwinner,sun50i-a64-de2.yaml | 2 +-
.../bindings/bus/baikal,bt1-axi.yaml | 2 +-
.../bindings/connector/usb-connector.yaml | 10 ++---
.../devicetree/bindings/dma/dma-common.yaml | 4 +-
.../devicetree/bindings/dma/dma-router.yaml | 2 +-
.../devicetree/bindings/dma/ingenic,dma.yaml | 2 +-
.../bindings/dma/snps,dma-spear1340.yaml | 10 ++---
.../devicetree/bindings/eeprom/at24.yaml | 4 +-
.../devicetree/bindings/eeprom/at25.yaml | 4 +-
.../bindings/hwmon/moortec,mr75203.yaml | 2 +-
.../bindings/hwmon/sensirion,shtc1.yaml | 4 +-
.../devicetree/bindings/hwmon/ti,tmp513.yaml | 2 +-
.../bindings/iio/light/upisemi,us5182.yaml | 2 +-
.../iio/proximity/semtech,sx9310.yaml | 6 +--
.../devicetree/bindings/input/gpio-keys.yaml | 12 +++---
.../interrupt-controller/mti,gic.yaml | 4 +-
.../interrupt-controller/ti,pruss-intc.yaml | 2 +-
.../interrupt-controller/ti,sci-inta.yaml | 2 +-
.../bindings/leds/backlight/common.yaml | 4 +-
.../devicetree/bindings/leds/common.yaml | 16 ++++----
.../devicetree/bindings/leds/leds-lp55xx.yaml | 10 ++---
.../net/allwinner,sun8i-a83t-emac.yaml | 6 +--
.../bindings/net/amlogic,meson-dwmac.yaml | 2 +-
.../devicetree/bindings/net/dsa/dsa.yaml | 6 +--
.../bindings/net/ethernet-controller.yaml | 24 ++++++------
.../devicetree/bindings/net/ethernet-phy.yaml | 20 +++++-----
.../bindings/net/fsl,qoriq-mc-dpmac.yaml | 2 +-
.../devicetree/bindings/net/mdio.yaml | 2 +-
.../bindings/net/mediatek,star-emac.yaml | 2 +-
.../devicetree/bindings/net/qcom,ipa.yaml | 2 +-
.../devicetree/bindings/net/snps,dwmac.yaml | 38 +++++++++----------
.../bindings/net/socionext,uniphier-ave4.yaml | 2 +-
.../bindings/net/ti,cpsw-switch.yaml | 2 +-
.../devicetree/bindings/net/ti,dp83867.yaml | 12 +++---
.../devicetree/bindings/net/ti,dp83869.yaml | 8 ++--
.../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 4 +-
.../bindings/net/wireless/qcom,ath11k.yaml | 2 +-
.../devicetree/bindings/phy/ti,omap-usb2.yaml | 4 +-
.../power/mediatek,power-controller.yaml | 12 +++---
.../bindings/power/supply/cw2015_battery.yaml | 2 +-
.../devicetree/bindings/powerpc/sleep.yaml | 2 +-
.../devicetree/bindings/serial/8250.yaml | 6 +--
.../bindings/soc/ti/k3-ringacc.yaml | 2 +-
.../sound/allwinner,sun4i-a10-codec.yaml | 2 +-
.../bindings/sound/st,stm32-sai.yaml | 4 +-
46 files changed, 138 insertions(+), 138 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml
index ea805c1e6b20..52bce5dbb11f 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.yaml
+++ b/Documentation/devicetree/bindings/arm/idle-states.yaml
@@ -313,7 +313,7 @@ patternProperties:
wakeup-latency-us by this duration.
idle-state-name:
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
description:
A string used as a descriptive name for the idle state.
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
index 0503651cd214..863a287ebc7e 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -34,7 +34,7 @@ properties:
description:
The SRAM that needs to be claimed to access the display engine
bus.
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
ranges: true
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
index 0bee4694578a..4ac78b44e45e 100644
--- a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@@ -46,7 +46,7 @@ properties:
const: 1
syscon:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: Phandle to the Baikal-T1 System Controller DT node
interrupts:
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index a84464b3e1f2..4286ed767a0a 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -37,7 +37,7 @@ properties:
description: Size of the connector, should be specified in case of
non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
connectors.
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- mini
@@ -67,7 +67,7 @@ properties:
power-role:
description: Determines the power role that the Type C connector will
support. "dual" refers to Dual Role Port (DRP).
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- source
@@ -76,7 +76,7 @@ properties:
try-power-role:
description: Preferred power role.
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- source
@@ -86,7 +86,7 @@ properties:
data-role:
description: Data role if Type C connector supports USB data. "dual" refers
Dual Role Device (DRD).
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- host
@@ -105,7 +105,7 @@ properties:
Type-C Cable and Connector specification, when Power Delivery is not
supported.
allOf:
- - $ref: /schemas/types.yaml#definitions/string
+ - $ref: /schemas/types.yaml#/definitions/string
enum:
- default
- 1.5A
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
index 307b499e8968..ad06d36af208 100644
--- a/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -38,12 +38,12 @@ properties:
maxItems: 255
dma-channels:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Number of DMA channels supported by the controller.
dma-requests:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Number of DMA request signals supported by the controller.
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
index 4cee5667b8a8..e72748496fd9 100644
--- a/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -23,7 +23,7 @@ properties:
pattern: "^dma-router(@.*)?$"
dma-masters:
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description:
Array of phandles to the DMA controllers the router can direct
the signal to.
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
index 00f19b3cac31..6a2043721b95 100644
--- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -48,7 +48,7 @@ properties:
ingenic,reserved-channels property.
ingenic,reserved-channels:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: >
Bitmask of channels to reserve for devices that need a specific
channel. These channels will only be assigned when explicitely
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index ef1d6879c158..6b35089ac017 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -54,7 +54,7 @@ properties:
maximum: 16
dma-masters:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Number of DMA masters supported by the controller. In case if
not specified the driver will try to auto-detect this and
@@ -63,7 +63,7 @@ properties:
maximum: 4
chan_allocation_order:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
DMA channels allocation order specifier. Zero means ascending order
(first free allocated), while one - descending (last free allocated).
@@ -71,7 +71,7 @@ properties:
enum: [0, 1]
chan_priority:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
DMA channels priority order. Zero means ascending channels priority
so the very first channel has the highest priority. While 1 means
@@ -80,7 +80,7 @@ properties:
enum: [0, 1]
block_size:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Maximum block size supported by the DMA controller.
enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
@@ -139,7 +139,7 @@ properties:
default: 256
snps,dma-protection-control:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
indicates the following features: bit 0 - privileged mode,
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 6edfa705b486..d5117c638b75 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -131,7 +131,7 @@ properties:
default: 1
read-only:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Disables writes to the eeprom.
@@ -141,7 +141,7 @@ properties:
Total eeprom size in bytes.
no-read-rollover:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that the multi-address eeprom does not automatically roll
over reads to the next slave address. Please consult the manual of
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index 744973637678..121a601db22e 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -45,13 +45,13 @@ properties:
spi-max-frequency: true
pagesize:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
description:
Size of the eeprom page.
size:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Total eeprom size in bytes.
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index 6f3e3c01f717..b79f069a04c2 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -32,7 +32,7 @@ properties:
PVT controller has 5 VM (voltage monitor) sensors.
vm-map defines CPU core to VM instance mapping. A
value of 0xff means that VM sensor is unused.
- $ref: /schemas/types.yaml#definitions/uint8-array
+ $ref: /schemas/types.yaml#/definitions/uint8-array
maxItems: 5
clocks:
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
index c523a1beb2b7..7d49478d9668 100644
--- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -29,12 +29,12 @@ properties:
const: 0x70
sensirion,blocking-io:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
If set, the driver hold the i2c bus until measurement is finished.
sensirion,low-precision:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
If set, the sensor aquire data with low precision (not recommended).
The driver aquire data with high precision by default.
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index c17e5d3ee3f1..8020d739a078 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -61,7 +61,7 @@ properties:
Array of three(TMP513) or two(TMP512) n-Factor value for each remote
temperature channel.
See datasheet Table 11 for n-Factor range list and value interpretation.
- $ref: /schemas/types.yaml#definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 3
items:
diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
index 4a9b2827cf7b..de5882cb3360 100644
--- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
+++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
@@ -45,7 +45,7 @@ properties:
default: 0x16
upisemi,continuous:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description: |
This chip has two power modes: one-shot (chip takes one measurement and
then shuts itself down) and continuous (chip takes continuous
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index ccfb163f3d34..5de0bb2180e6 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -72,7 +72,7 @@ properties:
- finest
semtech,startup-sensor:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
@@ -81,7 +81,7 @@ properties:
compensation.
semtech,proxraw-strength:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 2, 4, 8]
default: 2
description:
@@ -89,7 +89,7 @@ properties:
represent 1-1/N.
semtech,avg-pos-strength:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
default: 16
description:
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 6966ab009fa3..060a309ff8e7 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -34,13 +34,13 @@ patternProperties:
linux,code:
description: Key / Axis code to emit.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
linux,input-type:
description:
Specify event type this button/key generates. If not specified defaults to
<1> == EV_KEY.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 1
@@ -56,12 +56,12 @@ patternProperties:
linux,input-value = <0xffffffff>; /* -1 */
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
debounce-interval:
description:
Debouncing interval time in milliseconds. If not specified defaults to 5.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
default: 5
@@ -79,7 +79,7 @@ patternProperties:
EV_ACT_ANY - both asserted and deasserted
EV_ACT_ASSERTED - asserted
EV_ACT_DEASSERTED - deasserted
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
linux,can-disable:
@@ -118,7 +118,7 @@ then:
poll-interval:
description:
Poll interval time in milliseconds
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
required:
- poll-interval
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
index 039e08af98bb..91bb3c2307a7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -42,7 +42,7 @@ properties:
Specifies the list of CPU interrupt vectors to which the GIC may not
route interrupts. This property is ignored if the CPU is started in EIC
mode.
- $ref: /schemas/types.yaml#definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 6
uniqueItems: true
@@ -56,7 +56,7 @@ properties:
It accepts two values: the 1st is the starting interrupt and the 2nd is
the size of the reserved range. If not specified, the driver will
allocate the last (2 * number of VPEs in the system).
- $ref: /schemas/types.yaml#definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
items:
- minimum: 0
maximum: 254
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
index 1c4c009dedd0..c2ce215501a5 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -80,7 +80,7 @@ properties:
mapping is provided.
ti,irqs-reserved:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: |
Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
output interrupts 2 through 9) that are not connected to the Arm interrupt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index b5af12011499..3d89668573e8 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -76,7 +76,7 @@ properties:
"limit" specifies the limit for translation
ti,unmapped-event-sources:
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description:
Array of phandles to DMA controllers where the unmapped events originate.
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
index bc817f77d2b1..702ba350d869 100644
--- a/Documentation/devicetree/bindings/leds/backlight/common.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -22,7 +22,7 @@ properties:
The default brightness that should be applied to the LED by the operating
system on start-up. The brightness should not exceed the brightness the
LED can provide.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
max-brightness:
description:
@@ -31,6 +31,6 @@ properties:
on the brightness apart from what the driver says, as it could happen
that a LED can be made so bright that it gets damaged or causes damage
due to restrictions in a specific system, such as mounting conditions.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f1211e7045f1..b1f363747a62 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -27,21 +27,21 @@ properties:
List of device current outputs the LED is connected to. The outputs are
identified by the numbers that must be defined in the LED device binding
documentation.
- $ref: /schemas/types.yaml#definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
function:
description:
LED function. Use one of the LED_FUNCTION_* prefixed definitions
from the header include/dt-bindings/leds/common.h. If there is no
matching LED_FUNCTION available, add a new one.
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
color:
description:
Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
the header include/dt-bindings/leds/common.h. If there is no matching
LED_COLOR_ID available, add a new one.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 9
@@ -49,7 +49,7 @@ properties:
description:
Integer to be used when more than one instance of the same function is
needed, differing only with an ordinal number.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
label:
description:
@@ -66,7 +66,7 @@ properties:
produced where the LED momentarily turns off (or on). The "keep" setting
will keep the LED at whatever its current state is, without producing a
glitch.
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- on
- off
@@ -77,7 +77,7 @@ properties:
description:
This parameter, if present, is a string defining the trigger assigned to
the LED.
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
# LED will act as a back-light, controlled by the framebuffer system
@@ -109,7 +109,7 @@ properties:
brightness and duration (in ms). The exact format is
described in:
Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
- $ref: /schemas/types.yaml#definitions/uint32-matrix
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
minItems: 2
maxItems: 2
@@ -143,7 +143,7 @@ properties:
the device tree and be referenced by a phandle and a set of phandle
arguments. A length of arguments should be specified by the
#trigger-source-cells property in the source node.
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
# Required properties for flash LED child nodes:
flash-max-microamp:
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index 58e974793a79..f552cd143d5b 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -35,7 +35,7 @@ properties:
description: I2C slave address
clock-mode:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: |
Input clock mode
enum:
@@ -49,7 +49,7 @@ properties:
GPIO attached to the chip's enable pin
pwr-sel:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: |
LP8501 specific property. Power selection for output channels.
enum:
@@ -70,14 +70,14 @@ patternProperties:
$ref: common.yaml#
properties:
led-cur:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: |
Current setting at each LED channel (mA x10, 0 if LED is not connected)
minimum: 0
maximum: 255
max-cur:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: Maximun current at each LED channel.
reg:
@@ -97,7 +97,7 @@ patternProperties:
- 8 # LED output D9
chan-name:
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
description: name of channel
required:
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index c7c9ad4e3f9f..7f2578d48e3f 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -38,7 +38,7 @@ properties:
const: stmmaceth
syscon:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the device containing the EMAC or GMAC clock
register
@@ -114,7 +114,7 @@ allOf:
then:
properties:
allwinner,leds-active-low:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
EPHY LEDs are active low.
@@ -126,7 +126,7 @@ allOf:
const: allwinner,sun8i-h3-mdio-mux
mdio-parent-bus:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to EMAC MDIO.
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 6b057b117aa0..1f133f4a2924 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -60,7 +60,7 @@ allOf:
- const: timing-adjustment
amlogic,tx-delay-ns:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
The internal RGMII TX clock delay (provided by this driver) in
nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 8e044631bcf7..8a3494db4d8d 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -54,7 +54,7 @@ patternProperties:
description:
Describes the label associated with this port, which will become
the netdev name
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
link:
description:
@@ -62,13 +62,13 @@ patternProperties:
port is used as the outgoing port towards the phandle ports. The
full routing information must be given, not just the one hop
routes to neighbouring switches
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
ethernet:
description:
Should be a phandle to a valid Ethernet device node. This host
device is what the switch port is connected to
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
phy-handle: true
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index cc93063a8f39..0965f6515f9e 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -16,7 +16,7 @@ properties:
local-mac-address:
description:
Specifies the MAC address that was assigned to the network device.
- $ref: /schemas/types.yaml#definitions/uint8-array
+ $ref: /schemas/types.yaml#/definitions/uint8-array
items:
- minItems: 6
maxItems: 6
@@ -27,20 +27,20 @@ properties:
program; should be used in cases where the MAC address assigned
to the device by the boot program is different from the
local-mac-address property.
- $ref: /schemas/types.yaml#definitions/uint8-array
+ $ref: /schemas/types.yaml#/definitions/uint8-array
items:
- minItems: 6
maxItems: 6
max-frame-size:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Maximum transfer unit (IEEE defined MTU), rather than the
maximum frame size (there\'s contradiction in the Devicetree
Specification).
max-speed:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Specifies maximum speed in Mbit/s supported by the device.
@@ -101,7 +101,7 @@ properties:
$ref: "#/properties/phy-connection-type"
phy-handle:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies a reference to a node representing a PHY device.
@@ -114,7 +114,7 @@ properties:
deprecated: true
rx-fifo-depth:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
The size of the controller\'s receive fifo in bytes. This is used
for components that can have configurable receive fifo sizes,
@@ -129,12 +129,12 @@ properties:
If this property is present then the MAC applies the RX delay.
sfp:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies a reference to a node representing a SFP cage.
tx-fifo-depth:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
The size of the controller\'s transmit fifo in bytes. This
is used for components that can have configurable fifo sizes.
@@ -150,7 +150,7 @@ properties:
description:
Specifies the PHY management type. If auto is set and fixed-link
is not specified, it uses MDIO for management.
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
default: auto
enum:
- auto
@@ -198,17 +198,17 @@ properties:
speed:
description:
Link speed.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [10, 100, 1000]
full-duplex:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that full-duplex is used. When absent, half
duplex is assumed.
asym-pause:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that asym_pause should be enabled.
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 6dd72faebd89..2766fe45bb98 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -78,57 +78,57 @@ properties:
Maximum PHY supported speed in Mbits / seconds.
broken-turn-around:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates the PHY device does not correctly release
the turn around line low at end of the control phase of the
MDIO transaction.
enet-phy-lane-swap:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates the PHY will swap the TX/RX lanes to
compensate for the board being designed with the lanes
swapped.
eee-broken-100tx:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-1000t:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-10gt:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-1000kx:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-10gkx4:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-10gkr:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
phy-is-integrated:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates that the PHY is integrated into the same
physical package as the Ethernet MAC. If needed, muxers
@@ -158,7 +158,7 @@ properties:
this property is missing the delay will be skipped.
sfp:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies a reference to a node representing a SFP cage.
diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
index 2159b7d1f537..7f620a71a972 100644
--- a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
@@ -31,7 +31,7 @@ properties:
phy-mode: true
pcs-handle:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
A reference to a node representing a PCS PHY device found on
the internal MDIO bus.
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
index e811e0fd851c..08e15fb1584f 100644
--- a/Documentation/devicetree/bindings/net/mdio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -70,7 +70,7 @@ patternProperties:
The ID number for the device.
broken-turn-around:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates the MDIO device does not correctly release
the turn around line low at end of the control phase of the
diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
index 0bbd598704e9..e6a5ff208253 100644
--- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
@@ -42,7 +42,7 @@ properties:
- const: trans
mediatek,pericfg:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the device containing the PERICFG register range. This is used
to control the MII mode.
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 4d8464b2676d..d0cbbcf1b0e5 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -114,7 +114,7 @@ properties:
validating firwmare used by the GSI.
modem-remoteproc:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
This defines the phandle to the remoteproc node representing
the modem subsystem. This is requied so the IPA driver can
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 11a6fdb657c9..b2f6083f556a 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -126,7 +126,7 @@ properties:
in a different mode than the PHY in order to function.
snps,axi-config:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
AXI BUS Mode parameters. Phandle to a node that can contain the
following properties
@@ -141,7 +141,7 @@ properties:
* snps,rb, rebuild INCRx Burst
snps,mtl-rx-config:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Multiple RX Queues parameters. Phandle to a node that can
contain the following properties
@@ -164,7 +164,7 @@ properties:
* snps,priority, RX queue priority (Range 0x0 to 0xF)
snps,mtl-tx-config:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Multiple TX Queues parameters. Phandle to a node that can
contain the following properties
@@ -198,7 +198,7 @@ properties:
snps,reset-active-low:
deprecated: true
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that the PHY Reset is active low
@@ -208,55 +208,55 @@ properties:
Triplet of delays. The 1st cell is reset pre-delay in micro
seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
cell is reset post-delay in micro seconds.
- $ref: /schemas/types.yaml#definitions/uint32-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 3
maxItems: 3
snps,aal:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Use Address-Aligned Beats
snps,fixed-burst:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Program the DMA to use the fixed burst mode
snps,mixed-burst:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Program the DMA to use the mixed burst mode
snps,force_thresh_dma_mode:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Force DMA to use the threshold mode for both tx and rx
snps,force_sf_dma_mode:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Force DMA to use the Store and Forward mode for both tx and
rx. This flag is ignored if force_thresh_dma_mode is set.
snps,en-tx-lpi-clockgating:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Enable gating of the MAC TX clock during TX low-power mode
snps,multicast-filter-bins:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Number of multicast filter hash bins supported by this device
instance
snps,perfect-filter-entries:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Number of perfect filter entries supported by this device
instance
snps,ps-speed:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Port selection speed that can be passed to the core when PCS
is supported. For example, this is used in case of SGMII and
@@ -307,25 +307,25 @@ allOf:
snps,pbl:
description:
Programmable Burst Length (tx and rx)
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4, 8]
snps,txpbl:
description:
Tx Programmable Burst Length. If set, DMA tx will use this
value rather than snps,pbl.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4, 8]
snps,rxpbl:
description:
Rx Programmable Burst Length. If set, DMA rx will use this
value rather than snps,pbl.
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4, 8]
snps,no-pbl-x8:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
rev < 3.50, don\'t multiply the values by 4.
@@ -351,7 +351,7 @@ allOf:
then:
properties:
snps,tso:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Enables the TSO feature otherwise it will be managed by
MAC HW capability register.
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index cbacc04fc9e6..8a03a24a2019 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -64,7 +64,7 @@ properties:
- const: ether # for others
socionext,syscon-phy-mode:
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description:
A phandle to syscon with one argument that configures phy mode.
The argument is the ID of MAC instance.
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index dadeb8f811c0..07a00f53adbf 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -70,7 +70,7 @@ properties:
pinctrl-names: true
syscon:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the system control device node which provides access to
efuse IO range with MAC addresses
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
index 4050a3608658..047d757e8d82 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -47,31 +47,31 @@ properties:
takes precedence.
tx-fifo-depth:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values
rx-fifo-depth:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values
ti,clk-output-sel:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h
for applicable values. The CLK_OUT pin can also be disabled by this
property. When omitted, the PHY's default will be left as is.
ti,rx-internal-delay:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
for applicable values. Required only if interface type is
PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID.
ti,tx-internal-delay:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
for applicable values. Required only if interface type is
@@ -101,7 +101,7 @@ properties:
ti,fifo-depth:
deprecated: true
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
values.
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
index c3235f08e326..70a1209cb13b 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -44,22 +44,22 @@ properties:
to a maximum value (70 ohms).
tx-fifo-depth:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values
rx-fifo-depth:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values
ti,clk-output-sel:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values.
ti,op-mode:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Operational mode for the PHY. If this is not set then the operational
mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 227270cbf892..c47b58f3e3f6 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -119,12 +119,12 @@ properties:
description: label associated with this port
ti,mac-only:
- $ref: /schemas/types.yaml#definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag
description:
Specifies the port works in mac-only mode.
ti,syscon-efuse:
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description:
Phandle to the system control device node which provides access
to efuse IO range with MAC addresses
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index 6af999191559..85c2f699d602 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -136,7 +136,7 @@ properties:
- const: tcl2host-status-ring
qcom,rproc:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
DT entry of q6v5-wcss remoteproc driver.
Phandle to a node that can contain the following properties
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
index 83d5d0aceb04..cbbf5e8b1197 100644
--- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -44,13 +44,13 @@ properties:
- const: refclk
syscon-phy-power:
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description:
phandle/offset pair. Phandle to the system control module and
register offset to power on/off the PHY.
ctrl-module:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
(deprecated) phandle of the control module used by PHY driver
to power on the PHY. Use syscon-phy-power instead.
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index fd12bafe3548..d14cb9bac849 100644
--- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -83,11 +83,11 @@ patternProperties:
SUSBSYS clocks.
mediatek,infracfg:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.
patternProperties:
@@ -131,11 +131,11 @@ patternProperties:
SUSBSYS clocks.
mediatek,infracfg:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.
patternProperties:
@@ -179,11 +179,11 @@ patternProperties:
SUSBSYS clocks.
mediatek,infracfg:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
- $ref: /schemas/types.yaml#definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.
required:
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index ee92e6a076ac..5fcdf5801536 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -27,7 +27,7 @@ properties:
of this binary blob is kept secret by CellWise. The only way to obtain
it is to mail two batteries to a test facility of CellWise and receive
back a test report with the binary blob.
- $ref: /schemas/types.yaml#definitions/uint8-array
+ $ref: /schemas/types.yaml#/definitions/uint8-array
minItems: 64
maxItems: 64
diff --git a/Documentation/devicetree/bindings/powerpc/sleep.yaml b/Documentation/devicetree/bindings/powerpc/sleep.yaml
index 6494c7d08b93..1b0936a5beec 100644
--- a/Documentation/devicetree/bindings/powerpc/sleep.yaml
+++ b/Documentation/devicetree/bindings/powerpc/sleep.yaml
@@ -42,6 +42,6 @@ select: true
properties:
sleep:
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index c1d4c196f005..f54cae9ff7b2 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -126,7 +126,7 @@ properties:
maxItems: 1
current-speed:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: The current active speed of the UART.
reg-offset:
@@ -154,7 +154,7 @@ properties:
Set to indicate that the port does not implement loopback test mode.
fifo-size:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: The fifo size of the UART.
auto-flow-control:
@@ -165,7 +165,7 @@ properties:
property.
tx-threshold:
- $ref: /schemas/types.yaml#definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Specify the TX FIFO low water indication for parts with programmable
TX FIFO thresholds.
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
index c3c595e235a8..ddea3d41971d 100644
--- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
@@ -55,7 +55,7 @@ properties:
description: TI-SCI RM subtype for GP ring range
ti,sci:
- $ref: /schemas/types.yaml#definitions/phandle-array
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: phandle on TI-SCI compatible System controller node
ti,sci-dev-id:
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
index be390accdd07..dd47fef9854d 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -57,7 +57,7 @@ properties:
A list of the connections between audio components. Each entry
is a pair of strings, the first being the connection's sink, the
second being the connection's source.
- $ref: /schemas/types.yaml#definitions/non-unique-string-array
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
minItems: 2
maxItems: 18
items:
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 6ad48c7681c1..f2443b651282 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -106,7 +106,7 @@ patternProperties:
Must contain the phandle and index of the SAI sub-block providing
the synchronization.
allOf:
- - $ref: /schemas/types.yaml#definitions/phandle-array
+ - $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
st,iec60958:
@@ -117,7 +117,7 @@ patternProperties:
configured according to protocol defined in related DAI link node,
such as i2s, left justified, right justified, dsp and pdm protocols.
allOf:
- - $ref: /schemas/types.yaml#definitions/flag
+ - $ref: /schemas/types.yaml#/definitions/flag
"#clock-cells":
description: Configure the SAI device as master clock provider.
--
2.25.1
next reply other threads:[~2020-12-17 22:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-17 22:34 Rob Herring [this message]
2020-12-18 7:10 ` [PATCH] dt-bindings: Fix JSON pointers Vinod Koul
2020-12-18 13:13 ` Lee Jones
2020-12-18 14:48 ` Guenter Roeck
2020-12-18 16:45 ` Sebastian Reichel
2020-12-18 17:11 ` Florian Fainelli
2020-12-18 18:05 ` Mark Brown
2020-12-18 20:24 ` Jakub Kicinski
2020-12-19 17:49 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201217223429.354283-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=andrew@lunn.ch \
--cc=broonie@kernel.org \
--cc=daniel.thompson@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=jingoohan1@gmail.com \
--cc=kuba@kernel.org \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mripard@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.