From: Thierry Reding <thierry.reding@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>,
linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] pwm: Changes for v5.11-rc1
Date: Fri, 18 Dec 2020 17:04:01 +0100 [thread overview]
Message-ID: <20201218160401.2478999-1-thierry.reding@gmail.com> (raw)
Hi Linus,
The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git tags/pwm/for-5.11-rc1
for you to fetch changes up to 6eefb79d6f5bc4086bd02c76f1072dd4a8d9d9f6:
pwm: sun4i: Remove erroneous else branch (2020-12-17 14:23:49 +0100)
Thanks,
Thierry
----------------------------------------------------------------
pwm: Changes for v5.11-rc1
This is a fairly big release cycle from the PWM framework's point of
view. There's a large patcheset here which converts drivers to use the
new devm_platform_ioremap_resource() helper and a bunch of minor fixes
to existing drivers. Some of the existing drivers also add support for
more hardware, such as Atmel SAMA 5D2 and Mediatek MT8183.
Finally there's a couple of new drivers for Intel Keem Bay and LGM SoCs
as well as the DesignWare PWM controller.
----------------------------------------------------------------
Alexandre Belloni (3):
dt-bindings: microchip: atmel,at91rm9200-tcb: Add atmel,tcb-pwm
pwm: atmel-tcb: Switch to new binding
pwm: atmel-tcb: Add sama5d2 support
Anson Huang (3):
pwm: imx-tpm: Use dev_err_probe() to simplify error handling
pwm: imx27: Use dev_err_probe() to simplify error handling
pwm: imx1: Use dev_err_probe() to simplify error handling
Fabien Parent (4):
dt-bindings: pwm: pwm-mediatek: Add documentation for MT8183 SoC
pwm: mediatek: Always use bus clock
pwm: mediatek: Add MT8183 SoC support
dt-bindings: pwm: mtk-disp: add MT8167 SoC binding
Grygorii Strashko (1):
pwm: tiehrpwm: Handle deferred probe with dev_err_probe()
Hans de Goede (3):
pwm: lpss: Log error from pwm_lpss_is_updating() if the update bit is still set
pwm: lpss: Use DPM_FLAG_NO_DIRECT_COMPLETE instead of declaring a prepare handler
pwm: lpss: Set DPM_FLAG_SMART_SUSPEND on Cherry Trail devices
Jarkko Nikula (1):
pwm: Add DesignWare PWM Controller Driver
Lino Sanfilippo (1):
pwm: bcm2835: Support apply function for atomic configuration
Lokesh Vutla (1):
pwm: lp3943: Dynamically allocate PWM chip base
Rahul Tanwar (2):
Add DT bindings YAML schema for PWM fan controller of LGM SoC
pwm: Add PWM fan controller driver for LGM SoC
Soham Biswas (1):
pwm: core: Use octal permission
Thierry Reding (5):
pwm: sti: Avoid conditional gotos
pwm: sti: Remove unnecessary blank line
pwm: Use -EINVAL for unsupported polarity
pwm: sl28cpld: Set driver data before registering the PWM chip
pwm: sun4i: Remove erroneous else branch
Uwe Kleine-König (8):
pwm: ab8500: Add error message if pwmchip_add() fails
pwm: zx: Add missing cleanup in error path
pwm: ab8500: Explicitly allocate pwm chip base dynamically
pwm: Fix dependencies on HAS_IOMEM
pwm: lpss: Make compilable with COMPILE_TEST
pwm: keembay: Fix build failure with -Os
pwm: imx27: Fix overflow for bigger periods
pwm: Remove unused function pwmchip_add_inversed()
Vijayakannan Ayyathurai (2):
dt-bindings: pwm: keembay: Add bindings for Intel Keem Bay PWM
pwm: Add PWM driver for Intel Keem Bay
Yangtao Li (31):
pwm: sun4i: Convert to devm_platform_ioremap_resource()
pwm: fsl-ftm: Convert to devm_platform_ioremap_resource()
pwm: rcar: Convert to devm_platform_ioremap_resource()
pwm: renesas-tpu: Convert to devm_platform_ioremap_resource()
pwm: ep93xx: Convert to devm_platform_ioremap_resource()
pwm: tegra: Convert to devm_platform_ioremap_resource()
pwm: mediatek: Convert to devm_platform_ioremap_resource()
pwm: sti: Convert to devm_platform_ioremap_resource()
pwm: pxa: Convert to devm_platform_ioremap_resource()
pwm: zx: Convert to devm_platform_ioremap_resource()
pwm: spear: Convert to devm_platform_ioremap_resource()
pwm: bcm-kona: Convert to devm_platform_ioremap_resource()
pwm: lpc32xx: Convert to devm_platform_ioremap_resource()
pwm: meson: Convert to devm_platform_ioremap_resource()
pwm: rockchip: Convert to devm_platform_ioremap_resource()
pwm: bcm-iproc: Convert to devm_platform_ioremap_resource()
pwm: samsung: Convert to devm_platform_ioremap_resource()
pwm: tiehrpwm: Convert to devm_platform_ioremap_resource()
pwm: imx: Convert to devm_platform_ioremap_resource()
pwm: tiecap: Convert to devm_platform_ioremap_resource()
pwm: bcm2835: Convert to devm_platform_ioremap_resource()
pwm: berlin: Convert to devm_platform_ioremap_resource()
pwm: vt8500: Convert to devm_platform_ioremap_resource()
pwm: brcmstb: Convert to devm_platform_ioremap_resource()
pwm: mtk-disp: Convert to devm_platform_ioremap_resource()
pwm: clps711x: Convert to devm_platform_ioremap_resource()
pwm: img: Convert to devm_platform_ioremap_resource()
pwm: lpc18xx-sct: Convert to devm_platform_ioremap_resource()
pwm: hibvt: Convert to devm_platform_ioremap_resource()
pwm: sifive: Convert to devm_platform_ioremap_resource()
pwm: atmel: Convert to devm_platform_ioremap_resource()
.../devicetree/bindings/pwm/atmel-tcb-pwm.txt | 16 --
.../devicetree/bindings/pwm/intel,keembay-pwm.yaml | 47 +++
.../devicetree/bindings/pwm/intel,lgm-pwm.yaml | 44 +++
.../devicetree/bindings/pwm/pwm-mediatek.txt | 1 +
.../devicetree/bindings/pwm/pwm-mtk-disp.txt | 1 +
.../soc/microchip/atmel,at91rm9200-tcb.yaml | 34 ++-
drivers/pwm/Kconfig | 71 ++++-
drivers/pwm/Makefile | 3 +
drivers/pwm/core.c | 2 +-
drivers/pwm/pwm-ab8500.c | 4 +-
drivers/pwm/pwm-atmel-tcb.c | 264 ++++++++++-------
drivers/pwm/pwm-atmel.c | 4 +-
drivers/pwm/pwm-bcm-iproc.c | 4 +-
drivers/pwm/pwm-bcm-kona.c | 4 +-
drivers/pwm/pwm-bcm2835.c | 73 ++---
drivers/pwm/pwm-berlin.c | 4 +-
drivers/pwm/pwm-brcmstb.c | 4 +-
drivers/pwm/pwm-clps711x.c | 4 +-
drivers/pwm/pwm-crc.c | 2 +-
drivers/pwm/pwm-dwc.c | 319 +++++++++++++++++++++
drivers/pwm/pwm-ep93xx.c | 4 +-
drivers/pwm/pwm-fsl-ftm.c | 4 +-
drivers/pwm/pwm-hibvt.c | 7 +-
drivers/pwm/pwm-img.c | 4 +-
drivers/pwm/pwm-imx-tpm.c | 10 +-
drivers/pwm/pwm-imx1.c | 25 +-
drivers/pwm/pwm-imx27.c | 28 +-
drivers/pwm/pwm-intel-lgm.c | 244 ++++++++++++++++
drivers/pwm/pwm-iqs620a.c | 2 +-
drivers/pwm/pwm-keembay.c | 245 ++++++++++++++++
drivers/pwm/pwm-lp3943.c | 1 +
drivers/pwm/pwm-lpc18xx-sct.c | 4 +-
drivers/pwm/pwm-lpc32xx.c | 4 +-
drivers/pwm/pwm-lpss-platform.c | 39 ++-
drivers/pwm/pwm-lpss.c | 7 +-
drivers/pwm/pwm-mediatek.c | 23 +-
drivers/pwm/pwm-meson.c | 4 +-
drivers/pwm/pwm-mtk-disp.c | 4 +-
drivers/pwm/pwm-pxa.c | 4 +-
drivers/pwm/pwm-rcar.c | 6 +-
drivers/pwm/pwm-renesas-tpu.c | 4 +-
drivers/pwm/pwm-rockchip.c | 4 +-
drivers/pwm/pwm-samsung.c | 4 +-
drivers/pwm/pwm-sifive.c | 4 +-
drivers/pwm/pwm-sl28cpld.c | 4 +-
drivers/pwm/pwm-spear.c | 4 +-
drivers/pwm/pwm-sti.c | 54 ++--
drivers/pwm/pwm-sun4i.c | 10 +-
drivers/pwm/pwm-tegra.c | 4 +-
drivers/pwm/pwm-tiecap.c | 4 +-
drivers/pwm/pwm-tiehrpwm.c | 16 +-
drivers/pwm/pwm-vt8500.c | 4 +-
drivers/pwm/pwm-zx.c | 5 +-
include/linux/pwm.h | 5 -
54 files changed, 1307 insertions(+), 393 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt
create mode 100644 Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
create mode 100644 Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
create mode 100644 drivers/pwm/pwm-dwc.c
create mode 100644 drivers/pwm/pwm-intel-lgm.c
create mode 100644 drivers/pwm/pwm-keembay.c
next reply other threads:[~2020-12-18 16:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 16:04 Thierry Reding [this message]
2020-12-18 20:35 ` [GIT PULL] pwm: Changes for v5.11-rc1 Linus Torvalds
2020-12-19 0:57 ` Thierry Reding
2020-12-19 19:51 ` Linus Torvalds
2020-12-19 21:06 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218160401.2478999-1-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.