All of lore.kernel.org
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v9 3/5] drm/i915/display: Split and export main surface calculation from skl_check_main_surface()
Date: Fri, 18 Dec 2020 10:46:59 -0800	[thread overview]
Message-ID: <20201218184701.111857-3-jose.souza@intel.com> (raw)
In-Reply-To: <20201218184701.111857-1-jose.souza@intel.com>

The calculation the offsets of the main surface will be needed by PSR2
selective fetch code so here splitting and exporting it.
No functional changes were done here.

v3: Rebased

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 78 ++++++++++++--------
 drivers/gpu/drm/i915/display/intel_display.h |  2 +
 2 files changed, 51 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 78452de5e12f..add74ff7eb9b 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3821,33 +3821,19 @@ static int intel_plane_max_height(struct intel_plane *plane,
 		return INT_MAX;
 }
 
-static int skl_check_main_surface(struct intel_plane_state *plane_state)
+int skl_calc_main_surface_offset(const struct intel_plane_state *plane_state,
+				 int *x, int *y, u32 *offset)
 {
 	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
 	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
 	const struct drm_framebuffer *fb = plane_state->hw.fb;
-	unsigned int rotation = plane_state->hw.rotation;
-	int x = plane_state->uapi.src.x1 >> 16;
-	int y = plane_state->uapi.src.y1 >> 16;
-	int w = drm_rect_width(&plane_state->uapi.src) >> 16;
-	int h = drm_rect_height(&plane_state->uapi.src) >> 16;
-	int min_width = intel_plane_min_width(plane, fb, 0, rotation);
-	int max_width = intel_plane_max_width(plane, fb, 0, rotation);
-	int max_height = intel_plane_max_height(plane, fb, 0, rotation);
-	int aux_plane = intel_main_to_aux_plane(fb, 0);
-	u32 aux_offset = plane_state->color_plane[aux_plane].offset;
-	u32 alignment, offset;
+	const int aux_plane = intel_main_to_aux_plane(fb, 0);
+	const u32 aux_offset = plane_state->color_plane[aux_plane].offset;
+	const u32 alignment = intel_surf_alignment(fb, 0);
+	const int w = drm_rect_width(&plane_state->uapi.src) >> 16;
 
-	if (w > max_width || w < min_width || h > max_height) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "requested Y/RGB source size %dx%d outside limits (min: %dx1 max: %dx%d)\n",
-			    w, h, min_width, max_width, max_height);
-		return -EINVAL;
-	}
-
-	intel_add_fb_offsets(&x, &y, plane_state, 0);
-	offset = intel_plane_compute_aligned_offset(&x, &y, plane_state, 0);
-	alignment = intel_surf_alignment(fb, 0);
+	intel_add_fb_offsets(x, y, plane_state, 0);
+	*offset = intel_plane_compute_aligned_offset(x, y, plane_state, 0);
 	if (drm_WARN_ON(&dev_priv->drm, alignment && !is_power_of_2(alignment)))
 		return -EINVAL;
 
@@ -3856,9 +3842,10 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	 * main surface offset, and it must be non-negative. Make
 	 * sure that is what we will get.
 	 */
-	if (aux_plane && offset > aux_offset)
-		offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
-							   offset, aux_offset & ~(alignment - 1));
+	if (aux_plane && *offset > aux_offset)
+		*offset = intel_plane_adjust_aligned_offset(x, y, plane_state, 0,
+							    *offset,
+							    aux_offset & ~(alignment - 1));
 
 	/*
 	 * When using an X-tiled surface, the plane blows up
@@ -3869,18 +3856,51 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
 	if (fb->modifier == I915_FORMAT_MOD_X_TILED) {
 		int cpp = fb->format->cpp[0];
 
-		while ((x + w) * cpp > plane_state->color_plane[0].stride) {
-			if (offset == 0) {
+		while ((*x + w) * cpp > plane_state->color_plane[0].stride) {
+			if (*offset == 0) {
 				drm_dbg_kms(&dev_priv->drm,
 					    "Unable to find suitable display surface offset due to X-tiling\n");
 				return -EINVAL;
 			}
 
-			offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
-								   offset, offset - alignment);
+			*offset = intel_plane_adjust_aligned_offset(x, y, plane_state, 0,
+								    *offset,
+								    *offset - alignment);
 		}
 	}
 
+	return 0;
+}
+
+static int skl_check_main_surface(struct intel_plane_state *plane_state)
+{
+	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
+	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+	const struct drm_framebuffer *fb = plane_state->hw.fb;
+	const unsigned int rotation = plane_state->hw.rotation;
+	int x = plane_state->uapi.src.x1 >> 16;
+	int y = plane_state->uapi.src.y1 >> 16;
+	const int w = drm_rect_width(&plane_state->uapi.src) >> 16;
+	const int h = drm_rect_height(&plane_state->uapi.src) >> 16;
+	const int min_width = intel_plane_min_width(plane, fb, 0, rotation);
+	const int max_width = intel_plane_max_width(plane, fb, 0, rotation);
+	const int max_height = intel_plane_max_height(plane, fb, 0, rotation);
+	const int aux_plane = intel_main_to_aux_plane(fb, 0);
+	const u32 alignment = intel_surf_alignment(fb, 0);
+	u32 offset;
+	int ret;
+
+	if (w > max_width || w < min_width || h > max_height) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "requested Y/RGB source size %dx%d outside limits (min: %dx1 max: %dx%d)\n",
+			    w, h, min_width, max_width, max_height);
+		return -EINVAL;
+	}
+
+	ret = skl_calc_main_surface_offset(plane_state, &x, &y, &offset);
+	if (ret)
+		return ret;
+
 	/*
 	 * CCS AUX surface doesn't have its own x/y offsets, we must make sure
 	 * they match with the main surface x/y offsets.
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index a5771bfecba6..eb263bf9314d 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -630,6 +630,8 @@ u32 skl_plane_ctl_crtc(const struct intel_crtc_state *crtc_state);
 u32 skl_plane_stride(const struct intel_plane_state *plane_state,
 		     int plane);
 int skl_check_plane_surface(struct intel_plane_state *plane_state);
+int skl_calc_main_surface_offset(const struct intel_plane_state *plane_state,
+				 int *x, int *y, u32 *offset);
 int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
 int skl_format_to_fourcc(int format, bool rgb_order, bool alpha);
 unsigned int i9xx_plane_max_stride(struct intel_plane *plane,
-- 
2.29.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-12-18 18:46 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-18 18:46 [PATCH v9 1/5] drm: Add function to convert rect in 16.16 fixed format to regular format José Roberto de Souza
2020-12-18 18:46 ` [Intel-gfx] " José Roberto de Souza
2020-12-18 18:46 ` [Intel-gfx] [PATCH v9 2/5] drm/i915/display/psr: Use plane damage clips to calculate damaged area José Roberto de Souza
2020-12-23 11:53   ` Mun, Gwan-gyeong
2020-12-18 18:46 ` José Roberto de Souza [this message]
2020-12-18 18:47 ` [Intel-gfx] [PATCH v9 4/5] drm/i915/display/psr: Program plane's calculated offset to plane SF register José Roberto de Souza
2020-12-18 18:47 ` [Intel-gfx] [PATCH v9 5/5] HAX/DO_NOT_MERGE_IT: drm/i915/display: Enable PSR2 selective fetch for testing José Roberto de Souza
2020-12-18 20:56 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [v9,1/5] drm: Add function to convert rect in 16.16 fixed format to regular format Patchwork
2020-12-18 21:24 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2020-12-21 10:45 ` [PATCH v9 1/5] " Mun, Gwan-gyeong
2020-12-21 10:45   ` [Intel-gfx] " Mun, Gwan-gyeong
2020-12-23 14:48 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for series starting with [v9,1/5] drm: Add function to convert rect in 16.16 fixed format to regular format (rev2) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201218184701.111857-3-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --subject='Re: [Intel-gfx] [PATCH v9 3/5] drm/i915/display: Split and export main surface calculation from skl_check_main_surface()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.