All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: netdev@vger.kernel.org, andrew@lunn.ch,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Murali Krishna Policharla <murali.policharla@broadcom.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	"open list:BROADCOM SYSTEMPORT ETHERNET DRIVER" 
	<bcm-kernel-feedback-list@broadcom.com>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net] net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE
Date: Fri, 18 Dec 2020 23:02:50 +0200	[thread overview]
Message-ID: <20201218210250.owahylqnagtssbsw@skbuf> (raw)
In-Reply-To: <b8e61c3f-179f-7d8f-782a-86a8c69c5a75@gmail.com>

On Fri, Dec 18, 2020 at 12:54:33PM -0800, Florian Fainelli wrote:
> On 12/18/20 12:52 PM, Vladimir Oltean wrote:
> > On Fri, Dec 18, 2020 at 12:30:20PM -0800, Florian Fainelli wrote:
> >> On 12/18/20 12:24 PM, Vladimir Oltean wrote:
> >>> Hi Florian,
> >>>
> >>> On Fri, Dec 18, 2020 at 09:38:43AM -0800, Florian Fainelli wrote:
> >>>> The driver is already allocating receive buffers of 2KiB and the
> >>>> Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE.
> >>>>
> >>>> Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
> >>>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> >>>> ---
> >>>>  drivers/net/ethernet/broadcom/bcmsysport.c | 1 +
> >>>>  1 file changed, 1 insertion(+)
> >>>>
> >>>> diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
> >>>> index 0fdd19d99d99..b1ae9eb8f247 100644
> >>>> --- a/drivers/net/ethernet/broadcom/bcmsysport.c
> >>>> +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
> >>>> @@ -2577,6 +2577,7 @@ static int bcm_sysport_probe(struct platform_device *pdev)
> >>>>  			 NETIF_F_HW_VLAN_CTAG_TX;
> >>>>  	dev->hw_features |= dev->features;
> >>>>  	dev->vlan_features |= dev->features;
> >>>> +	dev->max_mtu = UMAC_MAX_MTU_SIZE;
> >>>>  
> >>>>  	/* Request the WOL interrupt and advertise suspend if available */
> >>>>  	priv->wol_irq_disabled = 1;
> >>>> -- 
> >>>> 2.25.1
> >>>>
> >>>
> >>> Do you want to treat the SYSTEMPORT Lite differently?
> >>>
> >>> 	/* Set maximum frame length */
> >>> 	if (!priv->is_lite)
> >>> 		umac_writel(priv, UMAC_MAX_MTU_SIZE, UMAC_MAX_FRAME_LEN);
> >>> 	else
> >>> 		gib_set_pad_extension(priv);
> >>
> >> SYSTEMPORT Lite does not actually validate the frame length, so setting
> >> a maximum number to the buffer size we allocate could work, but I don't
> >> see a reason to differentiate the two types of MACs here.
> > 
> > And if the Lite doesn't validate the frame length, then shouldn't it
> > report a max_mtu equal to the max_mtu of the attached DSA switch, plus
> > the Broadcom tag length? Doesn't the b53 driver support jumbo frames?
> 
> And how would I do that without create a horrible layering violation in
> either the systemport driver or DSA? Yes the b53 driver supports jumbo
> frames.

Sorry, I don't understand where is the layering violation (maybe it doesn't
help me either that I'm not familiar with Broadcom architectures).

Is the SYSTEMPORT Lite always used as a DSA master, or could it also be
used standalone? What would be the issue with hardcoding a max_mtu value
which is large enough for b53 to use jumbo frames?

  reply	other threads:[~2020-12-18 21:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-18 17:38 Florian Fainelli
2020-12-18 20:24 ` Vladimir Oltean
2020-12-18 20:30   ` Florian Fainelli
2020-12-18 20:52     ` Vladimir Oltean
2020-12-18 20:54       ` Florian Fainelli
2020-12-18 21:02         ` Vladimir Oltean [this message]
2020-12-18 21:08           ` Florian Fainelli
2020-12-18 21:14             ` Vladimir Oltean
2020-12-18 21:17               ` Florian Fainelli
2020-12-21 21:49                 ` Florian Fainelli
2020-12-21 22:25                   ` Vladimir Oltean
2020-12-21 22:55                     ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201218210250.owahylqnagtssbsw@skbuf \
    --to=olteanv@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=murali.policharla@broadcom.com \
    --cc=netdev@vger.kernel.org \
    --cc=vladimir.oltean@nxp.com \
    --subject='Re: [PATCH net] net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.