From: Felipe Contreras <felipe.contreras@gmail.com>
To: git@vger.kernel.org
Cc: Junio C Hamano <gitster@pobox.com>, Jeff King <peff@peff.net>,
Elijah Newren <newren@gmail.com>,
Felipe Contreras <felipe.contreras@gmail.com>,
Theodore Ts'o <tytso@mit.edu>
Subject: [PATCH v2 10/13] pull: add pull.mode
Date: Fri, 18 Dec 2020 15:10:23 -0600 [thread overview]
Message-ID: <20201218211026.1937168-11-felipe.contreras@gmail.com> (raw)
In-Reply-To: <20201218211026.1937168-1-felipe.contreras@gmail.com>
The evolution of pull options has somewhat served most users, however,
they have been found lacking for a very needed trio: merge / rebase /
fast-forward-only.
Another thing that is missing is the possibility to specify pull options
on a per-repository basis, as Theodore Ts'o suggested long time ago
[1].
This patch adds a pull.mode option with two possible values (for now);
merge and rebase. If set, it overrides what the user has specified in
pull.rebase, and it's updated with either --merge, or --rebase.
In addition to pull.mode, a 'remote.<name>.pullmode' configuration is
introduced, so the user can specify the desired options based on the
source of the pull, rather than the destination.
And of course; new modes like fast-forward-only can be introduced later
on.
[1] https://lore.kernel.org/git/20130312212027.GE14792@thunk.org
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
---
Documentation/config/pull.txt | 6 +++
Documentation/config/remote.txt | 6 +++
Documentation/git-pull.txt | 3 +-
builtin/pull.c | 81 +++++++++++++++++++++++++++++++--
rebase.c | 10 ++++
rebase.h | 9 ++++
t/t5520-pull.sh | 54 ++++++++++++++++++++++
t/t7601-merge-pull-config.sh | 14 ++++++
8 files changed, 178 insertions(+), 5 deletions(-)
diff --git a/Documentation/config/pull.txt b/Documentation/config/pull.txt
index 5404830609..f4385cde33 100644
--- a/Documentation/config/pull.txt
+++ b/Documentation/config/pull.txt
@@ -29,6 +29,12 @@ mode.
it unless you understand the implications (see linkgit:git-rebase[1]
for details).
+pull.mode::
+ When "git pull" is run, this determines if it would either merge or
+ rebase the fetched branch. The possible values are 'merge',
+ and 'rebase'. See "branch.<name>.pullmode" for setting this on a
+ per-branch basis.
+
pull.octopus::
The default merge strategy to use when pulling multiple branches
at once.
diff --git a/Documentation/config/remote.txt b/Documentation/config/remote.txt
index a8e6437a90..a732c92cf5 100644
--- a/Documentation/config/remote.txt
+++ b/Documentation/config/remote.txt
@@ -84,3 +84,9 @@ remote.<name>.promisor::
remote.<name>.partialclonefilter::
The filter that will be applied when fetching from this
promisor remote.
+
+remote.<name>.pullmode::
+ When "git pull" is run, this determines if it would either merge or
+ rebase the branches from this remote. The possible values are 'merge', and
+ 'rebase'. See "pull.mode" for doing this in a non
+ repository-specific manner.
diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt
index 195496e63d..65f8b16a7d 100644
--- a/Documentation/git-pull.txt
+++ b/Documentation/git-pull.txt
@@ -72,7 +72,8 @@ synchronize the local, and remote brances.
In these situations `git pull` will warn you about your possible
options, which are either `--merge`, or `--rebase`. However, by default
-it will continue doing a merge.
+it will continue doing a merge (you can change that with the `pull.mode`
+configuration).
A merge will create a new commit with two parent commits (`G` and `C`)
and a log message describing the changes, which you can edit.
diff --git a/builtin/pull.c b/builtin/pull.c
index f1a03ccd14..bfadd585c7 100644
--- a/builtin/pull.c
+++ b/builtin/pull.c
@@ -27,6 +27,8 @@
#include "commit-reach.h"
#include "sequencer.h"
+static enum pull_mode_type mode;
+
/**
* Parses the value of --rebase. If value is a false value, returns
* REBASE_FALSE. If value is a true value, returns REBASE_TRUE. If value is
@@ -49,6 +51,14 @@ static enum rebase_type parse_config_rebase(const char *key, const char *value,
return REBASE_INVALID;
}
+static enum pull_mode_type parse_config_pull_mode(const char *key, const char *value)
+{
+ enum pull_mode_type v = pull_mode_parse_value(value);
+ if (v == PULL_MODE_INVALID)
+ die(_("Invalid value for %s: %s"), key, value);
+ return v;
+}
+
/**
* Callback for --rebase, which parses arg with parse_config_rebase().
*/
@@ -60,9 +70,21 @@ static int parse_opt_rebase(const struct option *opt, const char *arg, int unset
*value = parse_config_rebase("--rebase", arg, 0);
else
*value = unset ? REBASE_FALSE : REBASE_TRUE;
+
+ if (*value > 0)
+ mode = *value >= REBASE_TRUE ? PULL_MODE_REBASE : PULL_MODE_MERGE;
+
return *value == REBASE_INVALID ? -1 : 0;
}
+static int parse_opt_merge(const struct option *opt, const char *arg, int unset)
+{
+ enum rebase_type *value = opt->value;
+ mode = PULL_MODE_MERGE;
+ *value = REBASE_FALSE;
+ return 0;
+}
+
static const char * const pull_usage[] = {
N_("git pull [<options>] [<repository> [<refspec>...]]"),
NULL
@@ -129,8 +151,9 @@ static struct option pull_options[] = {
"(false|true|merges|preserve|interactive)",
N_("incorporate changes by rebasing rather than merging"),
PARSE_OPT_OPTARG, parse_opt_rebase),
- OPT_SET_INT('m', "merge", &opt_rebase,
- N_("incorporate changes by merging"), REBASE_FALSE),
+ OPT_CALLBACK_F('m', "merge", &opt_rebase, NULL,
+ N_("incorporate changes by merging"),
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG, parse_opt_merge),
OPT_PASSTHRU('n', NULL, &opt_diffstat, NULL,
N_("do not show a diffstat at the end of the merge"),
PARSE_OPT_NOARG | PARSE_OPT_NONEG),
@@ -349,6 +372,31 @@ static enum rebase_type config_get_rebase(void)
return REBASE_DEFAULT;
}
+static enum pull_mode_type config_get_pull_mode(const char *repo)
+{
+ const char *value;
+ struct remote *remote;
+
+ remote = remote_get(repo);
+
+ if (remote) {
+ char *key = xstrfmt("remote.%s.pullmode", remote->name);
+
+ if (!git_config_get_value(key, &value)) {
+ enum pull_mode_type ret = parse_config_pull_mode(key, value);
+ free(key);
+ return ret;
+ }
+
+ free(key);
+ }
+
+ if (!git_config_get_value("pull.mode", &value))
+ return parse_config_pull_mode("pull.mode", value);
+
+ return PULL_MODE_DEFAULT;
+}
+
/**
* Read config variables.
*/
@@ -935,8 +983,8 @@ static void show_advice_pull_non_ff(void)
"\n"
"You can squelch this message by running one of the following commands:\n"
"\n"
- " git config --global pull.rebase false # merge\n"
- " git config --global pull.rebase true # rebase\n"
+ " git config --global pull.mode merge\n"
+ " git config --global pull.mode rebase\n"
" git config --global pull.ff only # fast-forward only\n"
"\n"
"If unsure, run \"git pull --merge\".\n"
@@ -970,6 +1018,31 @@ int cmd_pull(int argc, const char **argv, const char *prefix)
parse_repo_refspecs(argc, argv, &repo, &refspecs);
+ /*
+ * If the user has not specified --merge or --rebase, fetch pull.mode to override
+ * pull.rename.
+ */
+ if (!mode) {
+ mode = config_get_pull_mode(repo);
+
+ switch (mode) {
+ case PULL_MODE_MERGE:
+ opt_rebase = REBASE_FALSE;
+ break;
+ case PULL_MODE_REBASE:
+ /* Do not oeverride other rebase modes */
+ if (opt_rebase < REBASE_TRUE)
+ opt_rebase = REBASE_TRUE;
+ break;
+ case PULL_MODE_DEFAULT:
+ if (opt_rebase > 0)
+ mode = opt_rebase >= REBASE_TRUE ? PULL_MODE_REBASE : PULL_MODE_MERGE;
+ break;
+ default:
+ break;
+ }
+ }
+
if (read_cache_unmerged())
die_resolve_conflict("pull");
diff --git a/rebase.c b/rebase.c
index f8137d859b..bdfca49886 100644
--- a/rebase.c
+++ b/rebase.c
@@ -33,3 +33,13 @@ enum rebase_type rebase_parse_value(const char *value)
return REBASE_INVALID;
}
+
+enum pull_mode_type pull_mode_parse_value(const char *value)
+{
+ if (!strcmp(value, "merge") || !strcmp(value, "m"))
+ return PULL_MODE_MERGE;
+ else if (!strcmp(value, "rebase") || !strcmp(value, "r"))
+ return PULL_MODE_REBASE;
+
+ return PULL_MODE_INVALID;
+}
diff --git a/rebase.h b/rebase.h
index 34d4acfd74..5ab8f4ddd5 100644
--- a/rebase.h
+++ b/rebase.h
@@ -13,4 +13,13 @@ enum rebase_type {
enum rebase_type rebase_parse_value(const char *value);
+enum pull_mode_type {
+ PULL_MODE_INVALID = -1,
+ PULL_MODE_DEFAULT = 0,
+ PULL_MODE_MERGE,
+ PULL_MODE_REBASE
+};
+
+enum pull_mode_type pull_mode_parse_value(const char *value);
+
#endif /* REBASE */
diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh
index 9fae07cdfa..59799ac4d5 100755
--- a/t/t5520-pull.sh
+++ b/t/t5520-pull.sh
@@ -449,6 +449,16 @@ test_expect_success 'pull.rebase' '
test_cmp expect actual
'
+test_expect_success 'pull.mode rebase' '
+ git reset --hard before-rebase &&
+ test_config pull.mode rebase &&
+ git pull . copy &&
+ test_cmp_rev HEAD^ copy &&
+ echo new >expect &&
+ git show HEAD:file2 >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'pull --autostash & pull.rebase=true' '
test_config pull.rebase true &&
test_pull_autostash 1 --autostash
@@ -480,6 +490,18 @@ test_expect_success 'branch.to-rebase.rebase should override pull.rebase' '
test_cmp expect actual
'
+test_expect_success 'remote..pullmode' '
+ git reset --hard before-rebase &&
+ git remote add test_remote . &&
+ test_when_finished "git remote remove test_remote" &&
+ test_config remote.test_remote.pullmode rebase &&
+ git pull test_remote copy &&
+ test_cmp_rev HEAD^ copy &&
+ echo new >expect &&
+ git show HEAD:file2 >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'pull --rebase warns on --verify-signatures' '
git reset --hard before-rebase &&
git pull --rebase --verify-signatures . copy 2>err &&
@@ -523,6 +545,17 @@ test_expect_success 'pull.rebase=false create a new merge commit' '
test_cmp expect actual
'
+test_expect_success 'pull.mode=merge create a new merge commit' '
+ git reset --hard before-preserve-rebase &&
+ test_config pull.mode merge &&
+ git pull . copy &&
+ test_cmp_rev HEAD^1 before-preserve-rebase &&
+ test_cmp_rev HEAD^2 copy &&
+ echo file3 >expect &&
+ git show HEAD:file3.t >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'pull.rebase=true flattens keep-merge' '
git reset --hard before-preserve-rebase &&
test_config pull.rebase true &&
@@ -552,6 +585,16 @@ test_expect_success REBASE_P \
test_cmp_rev HEAD^2 keep-merge
'
+test_expect_success REBASE_P \
+ 'pull.rebase=preserve rebases and merges keep-merge with pull.mode' '
+ git reset --hard before-preserve-rebase &&
+ test_config pull.mode rebase &&
+ test_config pull.rebase preserve &&
+ git pull . copy &&
+ test_cmp_rev HEAD^^ copy &&
+ test_cmp_rev HEAD^2 keep-merge
+'
+
test_expect_success 'pull.rebase=interactive' '
write_script "$TRASH_DIRECTORY/fake-editor" <<-\EOF &&
echo I was here >fake.out &&
@@ -593,6 +636,17 @@ test_expect_success '--rebase=false create a new merge commit' '
test_cmp expect actual
'
+test_expect_success '--rebase=false create a new merge commit with pull.mode' '
+ git reset --hard before-preserve-rebase &&
+ test_config pull.mode rebase &&
+ git pull --rebase=false . copy &&
+ test_cmp_rev HEAD^1 before-preserve-rebase &&
+ test_cmp_rev HEAD^2 copy &&
+ echo file3 >expect &&
+ git show HEAD:file3.t >actual &&
+ test_cmp expect actual
+'
+
test_expect_success '--rebase=true rebases and flattens keep-merge' '
git reset --hard before-preserve-rebase &&
test_config pull.rebase preserve &&
diff --git a/t/t7601-merge-pull-config.sh b/t/t7601-merge-pull-config.sh
index 7c4607191a..47fd2e2d05 100755
--- a/t/t7601-merge-pull-config.sh
+++ b/t/t7601-merge-pull-config.sh
@@ -33,6 +33,13 @@ test_expect_success 'pull.rebase not set' '
test_i18ngrep ! "Pulling without specifying how to reconcile" err
'
+test_expect_success 'pull.mode set' '
+ git reset --hard c0 &&
+ test_config pull.mode merge &&
+ git pull . c1 2>err &&
+ test_i18ngrep ! "Pulling without specifying how to reconcile" err
+'
+
test_expect_success 'pull.rebase not set and pull.ff=true' '
git reset --hard c0 &&
test_config pull.ff true &&
@@ -92,6 +99,13 @@ test_expect_success 'pull.rebase not set (not-fast-forward)' '
test_i18ngrep "Pulling without specifying how to reconcile" decoded
'
+test_expect_success 'pull.mode set' '
+ git reset --hard c2 &&
+ test_config pull.mode merge &&
+ git pull . c1 2>err &&
+ test_i18ngrep ! "Pulling without specifying how to reconcile" err
+'
+
test_expect_success 'pull.rebase not set and pull.ff=true (not-fast-forward)' '
git reset --hard c2 &&
test_config pull.ff true &&
--
2.30.0.rc0
next prev parent reply other threads:[~2020-12-18 21:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 21:10 [PATCH v2 00/13] pull: pull mode part 2 Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 01/13] doc: pull: explain what is a fast-forward Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 02/13] pull: improve default warning Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 03/13] pull: cleanup autostash check Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 04/13] pull: trivial cleanup Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 05/13] pull: trivial whitespace style fix Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 06/13] pull: introduce --merge option Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 07/13] rebase: add REBASE_DEFAULT Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 08/13] pull: move configurations fetches Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 09/13] pull: show warning with --ff options Felipe Contreras
2020-12-18 21:10 ` Felipe Contreras [this message]
2020-12-18 21:10 ` [PATCH v2 11/13] pull: add pull.mode=fast-forward Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 12/13] pull: reorganize mode conditionals Felipe Contreras
2020-12-18 21:10 ` [PATCH v2 13/13] pull: improve --rebase and pull.rebase interaction Felipe Contreras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218211026.1937168-11-felipe.contreras@gmail.com \
--to=felipe.contreras@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=newren@gmail.com \
--cc=peff@peff.net \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.