From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pali =?utf-8?B?Um9ow6Fy?= Date: Sun, 20 Dec 2020 00:46:39 +0100 Subject: [PATCH 00/13] Nokia RX-51: Fix USB TTY console and enable it In-Reply-To: <1aba5bd1-f89a-3097-eacb-2dc4b84a98f7@ti.com> References: <20201129164618.5829-1-pali@kernel.org> <20201210200145.27fh2po6rln2eeds@pali> <1aba5bd1-f89a-3097-eacb-2dc4b84a98f7@ti.com> Message-ID: <20201219234639.fzbdhgim4d2abd45@pali> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday 11 December 2020 16:23:50 Lokesh Vutla wrote: > Hi Pali, > > On 11/12/20 1:31 am, Pali Roh?r wrote: > > Hello Lokesh, could you please process this patch series? USB serial > > console on Nokia N900 is really useful for debugging and currently in > > U-Boot master code is broken. Pavel has already reviewed patches and > > also CI tests passed. > > I am out of office from past 3 weeks and will be back on Monday. Will try to get > to this series early next week. Sorry for the delayed response. Ok! Let me know then if there are any issues in these patches. > Thanks and regards, > Lokesh > > > > > On Sunday 29 November 2020 17:46:05 Pali Roh?r wrote: > >> This patch series fix usbtty code (serial console via USB peripheral > >> mode), fix underlying musb peripheral code, fix compilation of > >> CONFIG_USB_DEVICE (used by usbtty), remove unused Nokia RX-51 code to > >> decrease size of U-Boot binary and finally enable usbtty serial console > >> for Nokia RX-51. > >> > >> With this patch series debugging of Nokia RX-51 can be done also via USB > >> serial console. > >> > >> On computer this serial console is accessible via /dev/ttyACM0 device. > >> > >> With current implementation there is an issue in musb driver that it > >> loose receiving bytes from USB bus when too many a characters are send > >> over USB tty from computer. Typing on keyboard to kermit terminal > >> connected to /dev/ttyACM0 is working fine. But pasting more more bytes > >> to terminal cause data lost on receiving side. I do not know where is > >> the issue or how to fix it (it looks like that data are lost at low > >> level when reading them from msub FIFO hardware) but typing on keyboard > >> is working fine. This is rather issue for sending files via x/y/z-modem > >> or kermit protocol. Currently U-Boot is not able to receive any file > >> via usbtty with musb driver due to this issue. > >> > >> Pali Roh?r (13): > >> serial: usbtty: Fix puts function > >> usb: musb: Fix compilation of gadget code > >> usb: musb: Always clear the data toggle bit when configuring ep > >> usb: musb: Fix configuring FIFO for endpoints > >> usb: musb: Read value of PERI_RXCSR to 16bit variable > >> usb: musb: Fix transmission of bigger buffers > >> usb: gadget: Do not export usbd_device_* arrays > >> usb: gadget: Use dbg_ep0() macro instead of serial_printf() > >> arm: omap3: Compile lowlevel_init() function only when it is used > >> arm: omap3: Compile s_init() function only when it is used > >> Nokia RX-51: Remove function set_muxconf_regs() > >> Nokia RX-51: Move content of rx51.h to rx51.c > >> Nokia RX-51: Enable usbtty serial console by default > >> > >> Makefile | 1 + > >> arch/arm/mach-omap2/omap3/board.c | 3 + > >> arch/arm/mach-omap2/omap3/lowlevel_init.S | 6 +- > >> board/nokia/rx51/rx51.c | 28 +- > >> board/nokia/rx51/rx51.h | 377 ---------------------- > >> configs/nokia_rx51_defconfig | 6 +- > >> doc/README.nokia_rx51 | 15 +- > >> drivers/serial/usbtty.c | 4 +- > >> drivers/usb/gadget/core.c | 38 +-- > >> drivers/usb/gadget/ep0.c | 47 ++- > >> drivers/usb/musb/musb_core.c | 10 +- > >> drivers/usb/musb/musb_udc.c | 19 +- > >> include/configs/nokia_rx51.h | 16 +- > >> include/usbdevice.h | 15 - > >> 14 files changed, 92 insertions(+), 493 deletions(-) > >> delete mode 100644 board/nokia/rx51/rx51.h > >> > >> -- > >> 2.20.1 > >>