All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiahui Cen <cenjiahui@huawei.com>
To: <qemu-devel@nongnu.org>
Cc: xieyingtai@huawei.com, Jiahui Cen <cenjiahui@huawei.com>,
	Eduardo Habkost <ehabkost@redhat.com>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	Ard Biesheuvel <ard.biesheuvel@arm.com>,
	Richard Henderson <richard.henderson@linaro.org>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	Laszlo Ersek <lersek@redhat.com>,
	wu.wubin@huawei.com
Subject: [PATCH v3 4/8] acpi/gpex: Exclude pxb's resources from PCI0
Date: Wed, 23 Dec 2020 17:08:32 +0800	[thread overview]
Message-ID: <20201223090836.9075-5-cenjiahui@huawei.com> (raw)
In-Reply-To: <20201223090836.9075-1-cenjiahui@huawei.com>

Exclude the resources of extra root bridges from PCI0's _CRS. Otherwise,
the resource windows would overlap in guest, and the IO resource window
would fail to be registered.

Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
---
 hw/pci-host/gpex-acpi.c | 64 +++++++++++++-------
 1 file changed, 43 insertions(+), 21 deletions(-)

diff --git a/hw/pci-host/gpex-acpi.c b/hw/pci-host/gpex-acpi.c
index c189306599..4bf1e94309 100644
--- a/hw/pci-host/gpex-acpi.c
+++ b/hw/pci-host/gpex-acpi.c
@@ -144,6 +144,8 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
     Aml *method, *crs, *dev, *rbuf;
     PCIBus *bus = cfg->bus;
     CrsRangeSet crs_range_set;
+    CrsRangeEntry *entry;
+    int i;
 
     /* start to construct the tables for pxb */
     crs_range_set_init(&crs_range_set);
@@ -191,7 +193,6 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
             aml_append(scope, dev);
         }
     }
-    crs_range_set_free(&crs_range_set);
 
     /* tables for the main */
     dev = aml_device("%s", "PCI0");
@@ -209,36 +210,55 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
     aml_append(method, aml_return(aml_int(cfg->ecam.base)));
     aml_append(dev, method);
 
+    /*
+     * At this point crs_range_set has all the ranges used by pci
+     * busses *other* than PCI0.  These ranges will be excluded from
+     * the PCI0._CRS.
+     */
     rbuf = aml_resource_template();
     aml_append(rbuf,
         aml_word_bus_number(AML_MIN_FIXED, AML_MAX_FIXED, AML_POS_DECODE,
                             0x0000, 0x0000, nr_pcie_buses - 1, 0x0000,
                             nr_pcie_buses));
     if (cfg->mmio32.size) {
-        aml_append(rbuf,
-                   aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
-                                    AML_NON_CACHEABLE, AML_READ_WRITE, 0x0000,
-                                    cfg->mmio32.base,
-                                    cfg->mmio32.base + cfg->mmio32.size - 1,
-                                    0x0000,
-                                    cfg->mmio32.size));
+        crs_replace_with_free_ranges(crs_range_set.mem_ranges,
+                                     cfg->mmio32.base,
+                                     cfg->mmio32.base + cfg->mmio32.size - 1);
+        for (i = 0; i < crs_range_set.mem_ranges->len; i++) {
+            entry = g_ptr_array_index(crs_range_set.mem_ranges, i);
+            aml_append(rbuf,
+                aml_dword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
+                                 AML_NON_CACHEABLE, AML_READ_WRITE, 0x0000,
+                                 entry->base, entry->limit,
+                                 0x0000, entry->limit - entry->base + 1));
+        }
     }
     if (cfg->pio.size) {
-        aml_append(rbuf,
-                   aml_dword_io(AML_MIN_FIXED, AML_MAX_FIXED, AML_POS_DECODE,
-                                AML_ENTIRE_RANGE, 0x0000, 0x0000,
-                                cfg->pio.size - 1,
-                                cfg->pio.base,
-                                cfg->pio.size));
+        crs_replace_with_free_ranges(crs_range_set.io_ranges,
+                                     0x0000,
+                                     cfg->pio.size - 1);
+        for (i = 0; i < crs_range_set.io_ranges->len; i++) {
+            entry = g_ptr_array_index(crs_range_set.io_ranges, i);
+            aml_append(rbuf,
+                aml_dword_io(AML_MIN_FIXED, AML_MAX_FIXED, AML_POS_DECODE,
+                             AML_ENTIRE_RANGE, 0x0000, entry->base,
+                             entry->limit, cfg->pio.base,
+                             entry->limit - entry->base + 1));
+        }
     }
     if (cfg->mmio64.size) {
-        aml_append(rbuf,
-                   aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
-                                    AML_NON_CACHEABLE, AML_READ_WRITE, 0x0000,
-                                    cfg->mmio64.base,
-                                    cfg->mmio64.base + cfg->mmio64.size - 1,
-                                    0x0000,
-                                    cfg->mmio64.size));
+        crs_replace_with_free_ranges(crs_range_set.mem_64bit_ranges,
+                                     cfg->mmio64.base,
+                                     cfg->mmio64.base + cfg->mmio64.size - 1);
+        for (i = 0; i < crs_range_set.mem_64bit_ranges->len; i++) {
+            entry = g_ptr_array_index(crs_range_set.mem_64bit_ranges, i);
+            aml_append(rbuf,
+                aml_qword_memory(AML_POS_DECODE, AML_MIN_FIXED, AML_MAX_FIXED,
+                                 AML_NON_CACHEABLE, AML_READ_WRITE, 0x0000,
+                                 entry->base,
+                                 entry->limit, 0x0000,
+                                 entry->limit - entry->base + 1));
+        }
     }
     aml_append(dev, aml_name_decl("_CRS", rbuf));
 
@@ -257,4 +277,6 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg)
     aml_append(dev_res0, aml_name_decl("_CRS", crs));
     aml_append(dev, dev_res0);
     aml_append(scope, dev);
+
+    crs_range_set_free(&crs_range_set);
 }
-- 
2.29.2



  parent reply	other threads:[~2020-12-23  9:11 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-23  9:08 [PATCH v3 0/8] acpi: Some fixes for pxb support for ARM virt machine Jiahui Cen
2020-12-23  9:08 ` [PATCH v3 1/8] acpi: Allow DSDT acpi table changes Jiahui Cen
2020-12-23  9:08 ` [PATCH v3 2/8] acpi: Add addr offset in build_crs Jiahui Cen
2020-12-29 13:36   ` Igor Mammedov
2020-12-31  3:26     ` Jiahui Cen
2020-12-23  9:08 ` [PATCH v3 3/8] acpi/gpex: Inform os to keep firmware resource map Jiahui Cen
2020-12-29 13:41   ` Igor Mammedov
2020-12-30 21:22     ` Michael S. Tsirkin
2020-12-31  8:22       ` Jiahui Cen
2021-01-05  0:35       ` Igor Mammedov
2021-01-05  1:53         ` Jiahui Cen
2021-01-06 13:29           ` Igor Mammedov
2021-01-07  5:54             ` Jiahui Cen
2021-01-05 19:33         ` Laszlo Ersek
2020-12-31  3:30     ` Jiahui Cen
2020-12-23  9:08 ` Jiahui Cen [this message]
2020-12-23  9:08 ` [PATCH v3 5/8] acpi/gpex: Append pxb devs in ascending order Jiahui Cen
2020-12-29 13:47   ` Igor Mammedov
2020-12-30 21:17     ` Michael S. Tsirkin
2020-12-31  7:34       ` Jiahui Cen
2021-01-05  0:21       ` Igor Mammedov
2020-12-23  9:08 ` [PATCH v3 6/8] Kconfig: Enable PXB for ARM_VIRT by default Jiahui Cen
2020-12-29 13:50   ` Igor Mammedov
2020-12-31  7:35     ` Jiahui Cen
2020-12-23  9:08 ` [PATCH v3 7/8] acpi: Enable pxb unit-test for ARM virt machine Jiahui Cen
2020-12-23  9:08 ` [PATCH v3 8/8] acpi: Update addr_trans and _DSM in expected files Jiahui Cen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201223090836.9075-5-cenjiahui@huawei.com \
    --to=cenjiahui@huawei.com \
    --cc=ard.biesheuvel@arm.com \
    --cc=ehabkost@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=lersek@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=wu.wubin@huawei.com \
    --cc=xieyingtai@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.