[PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk

From: "Pali Rohár" <pali@kernel.org>
To: Mathias Nyman <mathias.nyman@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Peter Chen <peter.chen@nxp.com>
Cc: Jun Li <jun.li@nxp.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] usb: host: xhci-plat: fix support for XHCI_SKIP_PHY_INIT quirk
Date: Wed, 23 Dec 2020 17:18:47 +0100	[thread overview]
Message-ID: <20201223161847.10811-1-pali@kernel.org> (raw)
In-Reply-To: <20201221150903.26630-1-pali@kernel.org>

Currently init_quirk callbacks for xhci platform drivers are called
xhci_plat_setup() function which is called after chip reset completes.
It happens in the middle of the usb_add_hcd() function.

But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe() function
prior calling usb_add_hcd() function. Therefore this XHCI_SKIP_PHY_INIT
currently does nothing as prior xhci_plat_setup() it is not set.

Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization value
which really needs to be set prior calling usb_add_hcd() as this function
at its beginning skips PHY init if this member is set.

This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by calling
init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
XHCI_SKIP_PHY_INIT is set. Also checking if either xhci->quirks or
priv->quirks contains this XHCI_SKIP_PHY_INIT quirk.

Signed-off-by: Pali Rohár <pali@kernel.org>

---
Changes in v2:
* Check also xhci->quirks as xhci_priv_init_quirk() callbacks are setting xhci->quirks
* Tested with "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720" patch
* Removed Fixes: line
---
 drivers/usb/host/xhci-plat.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 4d34f6005381..0eab7cb5a767 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 /* called during probe() after chip reset completes */
 static int xhci_plat_setup(struct usb_hcd *hcd)
 {
-	int ret;
-
-
-	ret = xhci_priv_init_quirk(hcd);
-	if (ret)
-		return ret;
-
 	return xhci_gen_setup(hcd, xhci_plat_quirks);
 }
 
@@ -330,7 +323,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
 
 	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
 	xhci->shared_hcd->tpl_support = hcd->tpl_support;
-	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
+
+	if (priv) {
+		ret = xhci_priv_init_quirk(hcd);
+		if (ret)
+			goto disable_usb_phy;
+	}
+
+	if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)))
 		hcd->skip_phy_initialization = 1;
 
 	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
-- 
2.20.1

