All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-i2c@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>
Subject: [PATCH 4/4] i2c: rcar: protect against supurious interrupts on V3U
Date: Wed, 23 Dec 2020 18:21:54 +0100	[thread overview]
Message-ID: <20201223172154.34462-5-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20201223172154.34462-1-wsa+renesas@sang-engineering.com>

V3U creates spurious interrupts which we need to handle. This costs time
until BUS_PHASE_DATA can be activated which is problematic for Gen2 SoCs
and earlier. Because of this we introduce two interrupt handlers here
which will call a generic main irq function once the timing critical
stuff is done.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-rcar.c | 57 ++++++++++++++++++++++++++---------
 1 file changed, 43 insertions(+), 14 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 3c9c3a6f7ac8..12f6d452c0f7 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -625,20 +625,11 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
  * generated. It turned out that taking a spinlock at the beginning of the ISR
  * was already causing repeated messages. Thus, this driver was converted to
  * the now lockless behaviour. Please keep this in mind when hacking the driver.
+ * R-Car Gen3 seems to have this fixed but earlier versions than R-Car Gen2 are
+ * likely affected. Therefore, we have different interrupt handler entries.
  */
-static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
+static irqreturn_t rcar_i2c_irq(int irq, struct rcar_i2c_priv *priv, u32 msr)
 {
-	struct rcar_i2c_priv *priv = ptr;
-	u32 msr;
-
-	/* Clear START or STOP immediately, except for REPSTART after read */
-	if (likely(!(priv->flags & ID_P_REP_AFTER_RD)))
-		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
-
-	msr = rcar_i2c_read(priv, ICMSR);
-
-	/* Only handle interrupts that are currently enabled */
-	msr &= rcar_i2c_read(priv, ICMIER);
 	if (!msr) {
 		if (rcar_i2c_slave_irq(priv))
 			return IRQ_HANDLED;
@@ -682,6 +673,41 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t rcar_i2c_gen2_irq(int irq, void *ptr)
+{
+	struct rcar_i2c_priv *priv = ptr;
+	u32 msr;
+
+	/* Clear START or STOP immediately, except for REPSTART after read */
+	if (likely(!(priv->flags & ID_P_REP_AFTER_RD)))
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
+
+	/* Only handle interrupts that are currently enabled */
+	msr = rcar_i2c_read(priv, ICMSR);
+	msr &= rcar_i2c_read(priv, ICMIER);
+
+	return rcar_i2c_irq(irq, priv, msr);
+}
+
+static irqreturn_t rcar_i2c_gen3_irq(int irq, void *ptr)
+{
+	struct rcar_i2c_priv *priv = ptr;
+	u32 msr;
+
+	/* Only handle interrupts that are currently enabled */
+	msr = rcar_i2c_read(priv, ICMSR);
+	msr &= rcar_i2c_read(priv, ICMIER);
+
+	/*
+	 * Clear START or STOP immediately, except for REPSTART after read or
+	 * if a spurious interrupt was detected.
+	 */
+	if (likely(!(priv->flags & ID_P_REP_AFTER_RD) && msr))
+		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
+
+	return rcar_i2c_irq(irq, priv, msr);
+}
+
 static struct dma_chan *rcar_i2c_request_dma_chan(struct device *dev,
 					enum dma_transfer_direction dir,
 					dma_addr_t port_addr)
@@ -929,6 +955,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	struct i2c_adapter *adap;
 	struct device *dev = &pdev->dev;
 	unsigned long irqflags = 0;
+	irqreturn_t (*irqhandler)(int irq, void *ptr) = rcar_i2c_gen3_irq;
 	int ret;
 
 	/* Otherwise logic will break because some bytes must always use PIO */
@@ -977,8 +1004,10 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 
 	rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
 
-	if (priv->devtype < I2C_RCAR_GEN3)
+	if (priv->devtype < I2C_RCAR_GEN3) {
 		irqflags |= IRQF_NO_THREAD;
+		irqhandler = rcar_i2c_gen2_irq;
+	}
 
 	if (priv->devtype == I2C_RCAR_GEN3) {
 		priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
@@ -999,7 +1028,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 		priv->flags |= ID_P_HOST_NOTIFY;
 
 	priv->irq = platform_get_irq(pdev, 0);
-	ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, irqflags, dev_name(dev), priv);
+	ret = devm_request_irq(dev, priv->irq, irqhandler, irqflags, dev_name(dev), priv);
 	if (ret < 0) {
 		dev_err(dev, "cannot get irq %d\n", priv->irq);
 		goto out_pm_disable;
-- 
2.28.0


  parent reply	other threads:[~2020-12-23 17:22 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-23 17:21 [PATCH 0/4] i2c: rcar: handle Gen2 and Gen3 V3U quirks better Wolfram Sang
2020-12-23 17:21 ` [PATCH 1/4] i2c: rcar: faster irq code to minimize HW race condition Wolfram Sang
2021-01-05 15:35   ` Wolfram Sang
2020-12-23 17:21 ` [PATCH 2/4] i2c: rcar: optimize cacheline " Wolfram Sang
2020-12-28 12:52   ` Geert Uytterhoeven
2020-12-28 12:55     ` Wolfram Sang
2021-01-05 15:35   ` Wolfram Sang
2020-12-23 17:21 ` [PATCH 3/4] i2c: rcar: make sure irq is not threaded on Gen2 and earlier Wolfram Sang
2021-01-05 15:35   ` Wolfram Sang
2020-12-23 17:21 ` Wolfram Sang [this message]
2020-12-28 13:37   ` [PATCH 4/4] i2c: rcar: protect against supurious interrupts on V3U Geert Uytterhoeven
2020-12-28 14:46     ` Wolfram Sang
2021-01-05 15:35   ` Wolfram Sang
2020-12-27 14:20 ` [PATCH 0/4] i2c: rcar: handle Gen2 and Gen3 V3U quirks better Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201223172154.34462-5-wsa+renesas@sang-engineering.com \
    --to=wsa+renesas@sang-engineering.com \
    --cc=kuninori.morimoto.gx@gmail.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.