From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dario Binacchi Date: Thu, 24 Dec 2020 08:25:25 +0100 Subject: [PATCH v7 02/28] dt-bindings: bus: ti-sysc: resync with Linux 5.9-rc7 In-Reply-To: <20201224072552.15848-1-dariobin@libero.it> References: <20201224072552.15848-1-dariobin@libero.it> Message-ID: <20201224072552.15848-3-dariobin@libero.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add support for PRUSS SYSC type: The PRUSS module has a SYSCFG which is unique. The SYSCFG has two additional unique fields called STANDBY_INIT and SUB_MWAIT in addition to regular IDLE_MODE and STANDBY_MODE fields. Add the bindings for this new sysc type. Add support for MCAN on dra76x: The dra76x MCAN generic interconnect module has a its own format for the bits in the control registers. Signed-off-by: Dario Binacchi --- (no changes since v1) include/dt-bindings/bus/ti-sysc.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/dt-bindings/bus/ti-sysc.h b/include/dt-bindings/bus/ti-sysc.h index 2c005376ac..eae4274543 100644 --- a/include/dt-bindings/bus/ti-sysc.h +++ b/include/dt-bindings/bus/ti-sysc.h @@ -15,6 +15,12 @@ /* SmartReflex sysc found on 36xx and later */ #define SYSC_OMAP3_SR_ENAWAKEUP (1 << 26) +#define SYSC_DRA7_MCAN_ENAWAKEUP (1 << 4) + +/* PRUSS sysc found on AM33xx/AM43xx/AM57xx */ +#define SYSC_PRUSS_SUB_MWAIT (1 << 5) +#define SYSC_PRUSS_STANDBY_INIT (1 << 4) + /* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */ #define SYSC_IDLE_FORCE 0 #define SYSC_IDLE_NO 1 -- 2.17.1