Hi,

On Tue, Dec 29, 2020 at 07:31:20PM +0200, Cristian Ciocaltea wrote:
> This driver provides poweroff and reboot support for a system through
> the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x
> family of PMICs.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> ---
> Changes in v4:
>  - None
> 
> Changes in v3:
>  - Removed the unnecessary driver compatibles
> 
>  drivers/power/reset/Kconfig            |   8 +-
>  drivers/power/reset/Makefile           |   1 +
>  drivers/power/reset/atc260x-poweroff.c | 263 +++++++++++++++++++++++++
>  3 files changed, 271 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/power/reset/atc260x-poweroff.c
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index b22c4fdb2561..1737e227b16e 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -39,6 +39,13 @@ config POWER_RESET_AT91_SAMA5D2_SHDWC
>  	  This driver supports the alternate shutdown controller for some Atmel
>  	  SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
>  
> +config POWER_RESET_ATC260X
> +	tristate "Actions Semi ATC260x PMIC power-off driver"
> +	depends on MFD_ATC260X
> +	help
> +	  This driver provides power-off and restart support for a system
> +	  through Actions Semi ATC260x series PMICs.
> +
>  config POWER_RESET_AXXIA
>  	bool "LSI Axxia reset driver"
>  	depends on ARCH_AXXIA
> @@ -292,4 +299,3 @@ config NVMEM_REBOOT_MODE
>  	  action according to the mode.
>  
>  endif
> -
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 9dc49d3a57ff..b4601c0a96ed 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
>  obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
>  obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
>  obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
> +obj-$(CONFIG_POWER_RESET_ATC260X) += atc260x-poweroff.o
>  obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
>  obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
>  obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
> diff --git a/drivers/power/reset/atc260x-poweroff.c b/drivers/power/reset/atc260x-poweroff.c
> new file mode 100644
> index 000000000000..81b050f99302
> --- /dev/null
> +++ b/drivers/power/reset/atc260x-poweroff.c
> @@ -0,0 +1,263 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Poweroff & reset driver for Actions Semi ATC260x PMICs
> + *
> + * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/mfd/atc260x/core.h>
> +#include <linux/module.h>
> +#include <linux/of.h>

There is no DT code in this driver?

> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>

power_supply.h? That's for chargers and battery fuel gauges.

> +#include <linux/reboot.h>
> +#include <linux/regmap.h>

> [...]

Otherwise LGTM. I suppose I can cherry-pick this patch into
my tree, or did I miss some dependencies?

-- Sebastian