[PATCH v7 01/31] elx: libefc_sli: SLI-4 register offsets and field definitions

[James Smart <jsmart2021@gmail.com>]

This is the initial patch for the new Emulex target mode SCSI
driver sources.

This patch:
- Creates the new Emulex source level directory drivers/scsi/elx
  and adds the directory to the MAINTAINERS file.
- Creates the first library subdirectory drivers/scsi/elx/libefc_sli.
  This library is a SLI-4 interface library.
- Starts the population of the libefc_sli library with definitions
  of SLI-4 hardware register offsets and definitions.

Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
---
 MAINTAINERS                        |   9 +
 drivers/scsi/elx/libefc_sli/sli4.c |  21 ++
 drivers/scsi/elx/libefc_sli/sli4.h | 308 +++++++++++++++++++++++++++++
 3 files changed, 338 insertions(+)
 create mode 100644 drivers/scsi/elx/libefc_sli/sli4.c
 create mode 100644 drivers/scsi/elx/libefc_sli/sli4.h

diff --git a/MAINTAINERS b/MAINTAINERS
index c021a3704857..c0d56b0ed018 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6509,6 +6509,15 @@ S:	Supported
 W:	http://www.broadcom.com
 F:	drivers/scsi/lpfc/
 
+EMULEX/BROADCOM EFCT FC/FCOE SCSI TARGET DRIVER
+M:	James Smart <james.smart@broadcom.com>
+M:	Ram Vegesna <ram.vegesna@broadcom.com>
+L:	linux-scsi@vger.kernel.org
+L:	target-devel@vger.kernel.org
+S:	Supported
+W:	http://www.broadcom.com
+F:	drivers/scsi/elx/
+
 ENE CB710 FLASH CARD READER DRIVER
 M:	Michał Mirosław <mirq-linux@rere.qmqm.pl>
 S:	Maintained
diff --git a/drivers/scsi/elx/libefc_sli/sli4.c b/drivers/scsi/elx/libefc_sli/sli4.c
new file mode 100644
index 000000000000..5396e14e7bf8
--- /dev/null
+++ b/drivers/scsi/elx/libefc_sli/sli4.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Broadcom. All Rights Reserved. The term
+ * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.
+ */
+
+/**
+ * All common (i.e. transport-independent) SLI-4 functions are implemented
+ * in this file.
+ */
+#include "sli4.h"
+
+static struct sli4_asic_entry_t sli4_asic_table[] = {
+	{ SLI4_ASIC_REV_B0, SLI4_ASIC_GEN_5},
+	{ SLI4_ASIC_REV_D0, SLI4_ASIC_GEN_5},
+	{ SLI4_ASIC_REV_A3, SLI4_ASIC_GEN_6},
+	{ SLI4_ASIC_REV_A0, SLI4_ASIC_GEN_6},
+	{ SLI4_ASIC_REV_A1, SLI4_ASIC_GEN_6},
+	{ SLI4_ASIC_REV_A3, SLI4_ASIC_GEN_6},
+	{ SLI4_ASIC_REV_A1, SLI4_ASIC_GEN_7},
+};
diff --git a/drivers/scsi/elx/libefc_sli/sli4.h b/drivers/scsi/elx/libefc_sli/sli4.h
new file mode 100644
index 000000000000..f8e4b2355721
--- /dev/null
+++ b/drivers/scsi/elx/libefc_sli/sli4.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021 Broadcom. All Rights Reserved. The term
+ * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.
+ *
+ */
+
+/*
+ * All common SLI-4 structures and function prototypes.
+ */
+
+#ifndef _SLI4_H
+#define _SLI4_H
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "scsi/fc/fc_els.h"
+#include "scsi/fc/fc_fs.h"
+#include "../include/efc_common.h"
+
+/*************************************************************************
+ * Common SLI-4 register offsets and field definitions
+ */
+
+/* SLI_INTF - SLI Interface Definition Register */
+#define SLI4_INTF_REG			0x0058
+enum sli4_intf {
+	SLI4_INTF_REV_SHIFT		= 4,
+	SLI4_INTF_REV_MASK		= 0xf0,
+
+	SLI4_INTF_REV_S3		= 0x30,
+	SLI4_INTF_REV_S4		= 0x40,
+
+	SLI4_INTF_FAMILY_SHIFT		= 8,
+	SLI4_INTF_FAMILY_MASK		= 0x0f00,
+
+	SLI4_FAMILY_CHECK_ASIC_TYPE	= 0x0f00,
+
+	SLI4_INTF_IF_TYPE_SHIFT		= 12,
+	SLI4_INTF_IF_TYPE_MASK		= 0xf000,
+
+	SLI4_INTF_IF_TYPE_2		= 0x2000,
+	SLI4_INTF_IF_TYPE_6		= 0x6000,
+
+	SLI4_INTF_VALID_SHIFT		= 29,
+	SLI4_INTF_VALID_MASK		= 0xe0000000,
+
+	SLI4_INTF_VALID_VALUE		= 0xc0000000,
+};
+
+/* ASIC_ID - SLI ASIC Type and Revision Register */
+#define SLI4_ASIC_ID_REG	0x009c
+enum sli4_asic {
+	SLI4_ASIC_GEN_SHIFT	= 8,
+	SLI4_ASIC_GEN_MASK	= 0xff00,
+	SLI4_ASIC_GEN_5		= 0x0b00,
+	SLI4_ASIC_GEN_6		= 0x0c00,
+	SLI4_ASIC_GEN_7		= 0x0d00,
+};
+
+enum sli4_acic_revisions {
+	SLI4_ASIC_REV_A0	= 0x00,
+	SLI4_ASIC_REV_A1	= 0x01,
+	SLI4_ASIC_REV_A2	= 0x02,
+	SLI4_ASIC_REV_A3	= 0x03,
+	SLI4_ASIC_REV_B0	= 0x10,
+	SLI4_ASIC_REV_B1	= 0x11,
+	SLI4_ASIC_REV_B2	= 0x12,
+	SLI4_ASIC_REV_C0	= 0x20,
+	SLI4_ASIC_REV_C1	= 0x21,
+	SLI4_ASIC_REV_C2	= 0x22,
+	SLI4_ASIC_REV_D0	= 0x30,
+};
+
+struct sli4_asic_entry_t {
+	u32 rev_id;
+	u32 family;
+};
+
+/* BMBX - Bootstrap Mailbox Register */
+#define SLI4_BMBX_REG		0x0160
+enum sli4_bmbx {
+	SLI4_BMBX_MASK_HI	= 0x3,
+	SLI4_BMBX_MASK_LO	= 0xf,
+	SLI4_BMBX_RDY		= 1 << 0,
+	SLI4_BMBX_HI		= 1 << 1,
+	SLI4_BMBX_SIZE		= 256,
+};
+
+static inline u32
+sli_bmbx_write_hi(u64 addr) {
+	u32 val;
+
+	val = upper_32_bits(addr) & ~SLI4_BMBX_MASK_HI;
+	val |= SLI4_BMBX_HI;
+
+	return val;
+}
+
+static inline u32
+sli_bmbx_write_lo(u64 addr) {
+	u32 val;
+
+	val = (upper_32_bits(addr) & SLI4_BMBX_MASK_HI) << 30;
+	val |= ((addr) & ~SLI4_BMBX_MASK_LO) >> 2;
+
+	return val;
+}
+
+/* SLIPORT_CONTROL - SLI Port Control Register */
+#define SLI4_PORT_CTRL_REG	0x0408
+enum sli4_port_ctrl {
+	SLI4_PORT_CTRL_IP	= 1u << 27,
+	SLI4_PORT_CTRL_IDIS	= 1u << 22,
+	SLI4_PORT_CTRL_FDD	= 1u << 31,
+};
+
+/* SLI4_SLIPORT_ERROR - SLI Port Error Register */
+#define SLI4_PORT_ERROR1	0x040c
+#define SLI4_PORT_ERROR2	0x0410
+
+/* EQCQ_DOORBELL - EQ and CQ Doorbell Register */
+#define SLI4_EQCQ_DB_REG	0x120
+enum sli4_eqcq_e {
+	SLI4_EQ_ID_LO_MASK	= 0x01ff,
+
+	SLI4_CQ_ID_LO_MASK	= 0x03ff,
+
+	SLI4_EQCQ_CI_EQ		= 0x0200,
+
+	SLI4_EQCQ_QT_EQ		= 0x00000400,
+	SLI4_EQCQ_QT_CQ		= 0x00000000,
+
+	SLI4_EQCQ_ID_HI_SHIFT	= 11,
+	SLI4_EQCQ_ID_HI_MASK	= 0xf800,
+
+	SLI4_EQCQ_NUM_SHIFT	= 16,
+	SLI4_EQCQ_NUM_MASK	= 0x1fff0000,
+
+	SLI4_EQCQ_ARM		= 0x20000000,
+	SLI4_EQCQ_UNARM		= 0x00000000,
+};
+
+static inline u32
+sli_format_eq_db_data(u16 num_popped, u16 id, u32 arm) {
+	u32 reg;
+
+	reg = (id & SLI4_EQ_ID_LO_MASK) | SLI4_EQCQ_QT_EQ;
+	reg |= (((id) >> 9) << SLI4_EQCQ_ID_HI_SHIFT) & SLI4_EQCQ_ID_HI_MASK;
+	reg |= ((num_popped) << SLI4_EQCQ_NUM_SHIFT) & SLI4_EQCQ_NUM_MASK;
+	reg |= arm | SLI4_EQCQ_CI_EQ;
+
+	return reg;
+}
+
+static inline u32
+sli_format_cq_db_data(u16 num_popped, u16 id, u32 arm) {
+	u32 reg;
+
+	reg = ((id) & SLI4_CQ_ID_LO_MASK) | SLI4_EQCQ_QT_CQ;
+	reg |= (((id) >> 10) << SLI4_EQCQ_ID_HI_SHIFT) & SLI4_EQCQ_ID_HI_MASK;
+	reg |= ((num_popped) << SLI4_EQCQ_NUM_SHIFT) & SLI4_EQCQ_NUM_MASK;
+	reg |= arm;
+
+	return reg;
+}
+
+/* EQ_DOORBELL - EQ Doorbell Register for IF_TYPE = 6*/
+#define SLI4_IF6_EQ_DB_REG	0x120
+enum sli4_eq_e {
+	SLI4_IF6_EQ_ID_MASK	= 0x0fff,
+
+	SLI4_IF6_EQ_NUM_SHIFT	= 16,
+	SLI4_IF6_EQ_NUM_MASK	= 0x1fff0000,
+};
+
+static inline u32
+sli_format_if6_eq_db_data(u16 num_popped, u16 id, u32 arm) {
+	u32 reg;
+
+	reg = id & SLI4_IF6_EQ_ID_MASK;
+	reg |= (num_popped << SLI4_IF6_EQ_NUM_SHIFT) & SLI4_IF6_EQ_NUM_MASK;
+	reg |= arm;
+
+	return reg;
+}
+
+/* CQ_DOORBELL - CQ Doorbell Register for IF_TYPE = 6 */
+#define SLI4_IF6_CQ_DB_REG	0xc0
+enum sli4_cq_e {
+	SLI4_IF6_CQ_ID_MASK	= 0xffff,
+
+	SLI4_IF6_CQ_NUM_SHIFT	= 16,
+	SLI4_IF6_CQ_NUM_MASK	= 0x1fff0000,
+};
+
+static inline u32
+sli_format_if6_cq_db_data(u16 num_popped, u16 id, u32 arm) {
+	u32 reg;
+
+	reg = id & SLI4_IF6_CQ_ID_MASK;
+	reg |= ((num_popped) << SLI4_IF6_CQ_NUM_SHIFT) & SLI4_IF6_CQ_NUM_MASK;
+	reg |= arm;
+
+	return reg;
+}
+
+/* MQ_DOORBELL - MQ Doorbell Register */
+#define SLI4_MQ_DB_REG		0x0140
+#define SLI4_IF6_MQ_DB_REG	0x0160
+enum sli4_mq_e {
+	SLI4_MQ_ID_MASK		= 0xffff,
+
+	SLI4_MQ_NUM_SHIFT	= 16,
+	SLI4_MQ_NUM_MASK	= 0x3fff0000,
+};
+
+static inline u32
+sli_format_mq_db_data(u16 id) {
+	u32 reg;
+
+	reg = id & SLI4_MQ_ID_MASK;
+	reg |= (1 << SLI4_MQ_NUM_SHIFT) & SLI4_MQ_NUM_MASK;
+
+	return reg;
+}
+
+/* RQ_DOORBELL - RQ Doorbell Register */
+#define SLI4_RQ_DB_REG		0x0a0
+#define SLI4_IF6_RQ_DB_REG	0x0080
+enum sli4_rq_e {
+	SLI4_RQ_DB_ID_MASK	= 0xffff,
+
+	SLI4_RQ_DB_NUM_SHIFT	= 16,
+	SLI4_RQ_DB_NUM_MASK	= 0x3fff0000,
+};
+
+static inline u32
+sli_format_rq_db_data(u16 id) {
+	u32 reg;
+
+	reg = id & SLI4_RQ_DB_ID_MASK;
+	reg |= (1 << SLI4_RQ_DB_NUM_SHIFT) & SLI4_RQ_DB_NUM_MASK;
+
+	return reg;
+}
+
+/* WQ_DOORBELL - WQ Doorbell Register */
+#define SLI4_IO_WQ_DB_REG	0x040
+#define SLI4_IF6_WQ_DB_REG	0x040
+enum sli4_wq_e {
+	SLI4_WQ_ID_MASK		= 0xffff,
+
+	SLI4_WQ_IDX_SHIFT	= 16,
+	SLI4_WQ_IDX_MASK	= 0xff0000,
+
+	SLI4_WQ_NUM_SHIFT	= 24,
+	SLI4_WQ_NUM_MASK	= 0x0ff00000,
+};
+
+static inline u32
+sli_format_wq_db_data(u16 id) {
+	u32 reg;
+
+	reg = id & SLI4_WQ_ID_MASK;
+	reg |= (1 << SLI4_WQ_NUM_SHIFT) & SLI4_WQ_NUM_MASK;
+
+	return reg;
+}
+
+/* SLIPORT_STATUS - SLI Port Status Register */
+#define SLI4_PORT_STATUS_REGOFF	0x0404
+enum sli4_port_status {
+	SLI4_PORT_STATUS_FDP	= 1u << 21,
+	SLI4_PORT_STATUS_RDY	= 1u << 23,
+	SLI4_PORT_STATUS_RN	= 1u << 24,
+	SLI4_PORT_STATUS_DIP	= 1u << 25,
+	SLI4_PORT_STATUS_OTI	= 1u << 29,
+	SLI4_PORT_STATUS_ERR	= 1u << 31,
+};
+
+#define SLI4_PHYDEV_CTRL_REG	0x0414
+#define SLI4_PHYDEV_CTRL_FRST	(1 << 1)
+#define SLI4_PHYDEV_CTRL_DD	(1 << 2)
+
+/* Register name enums */
+enum sli4_regname_en {
+	SLI4_REG_BMBX,
+	SLI4_REG_EQ_DOORBELL,
+	SLI4_REG_CQ_DOORBELL,
+	SLI4_REG_RQ_DOORBELL,
+	SLI4_REG_IO_WQ_DOORBELL,
+	SLI4_REG_MQ_DOORBELL,
+	SLI4_REG_PHYSDEV_CONTROL,
+	SLI4_REG_PORT_CONTROL,
+	SLI4_REG_PORT_ERROR1,
+	SLI4_REG_PORT_ERROR2,
+	SLI4_REG_PORT_SEMAPHORE,
+	SLI4_REG_PORT_STATUS,
+	SLI4_REG_UNKWOWN			/* must be last */
+};
+
+struct sli4_reg {
+	u32	rset;
+	u32	off;
+};
+
+#endif /* !_SLI4_H */
-- 
2.26.2