From: David Ahern <dsahern@kernel.org>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, schoen@loyalty.org,
David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next v2 10/11] selftests: Add new option for client-side passwords
Date: Sat, 9 Jan 2021 17:18:51 -0700 [thread overview]
Message-ID: <20210110001852.35653-11-dsahern@kernel.org> (raw)
In-Reply-To: <20210110001852.35653-1-dsahern@kernel.org>
From: David Ahern <dsahern@gmail.com>
Add new option to nettest to specify MD5 password to use for client
side. Update fcnal-test script. This is needed for a single instance
running both server and client modes to test password mismatches.
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/fcnal-test.sh | 88 +++++++++++------------
tools/testing/selftests/net/nettest.c | 9 ++-
2 files changed, 52 insertions(+), 45 deletions(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index edd33f83f80e..5d15ded2433b 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -803,7 +803,7 @@ ipv4_tcp_md5_novrf()
log_start
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: Single address config"
# client sends MD5, server not configured
@@ -811,7 +811,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -s &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Server no config, client uses password"
# wrong password
@@ -819,7 +819,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
# client from different address
@@ -827,7 +827,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
#
@@ -838,7 +838,7 @@ ipv4_tcp_md5_novrf()
log_start
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: Prefix config"
# client in prefix, wrong password
@@ -846,7 +846,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Prefix config, client uses wrong password"
# client outside of prefix
@@ -854,7 +854,7 @@ ipv4_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
@@ -871,7 +871,7 @@ ipv4_tcp_md5()
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
# client sends MD5, server not configured
@@ -879,7 +879,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since server does not have MD5 auth"
run_cmd nettest -s -d ${VRF} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
# wrong password
@@ -887,7 +887,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
# client from different address
@@ -895,7 +895,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since server config differs from client"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
#
@@ -906,7 +906,7 @@ ipv4_tcp_md5()
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
# client in prefix, wrong password
@@ -914,7 +914,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
# client outside of prefix
@@ -922,7 +922,7 @@ ipv4_tcp_md5()
show_hint "Should timeout since client address is outside of prefix"
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
#
@@ -933,14 +933,14 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
@@ -948,7 +948,7 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -956,21 +956,21 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
log_start
@@ -978,7 +978,7 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
+ run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -986,7 +986,7 @@ ipv4_tcp_md5()
run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
sleep 1
- run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
#
@@ -2267,7 +2267,7 @@ ipv6_tcp_md5_novrf()
log_start
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: Single address config"
# client sends MD5, server not configured
@@ -2275,7 +2275,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -6 -s &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Server no config, client uses password"
# wrong password
@@ -2283,7 +2283,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
# client from different address
@@ -2291,7 +2291,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
#
@@ -2302,7 +2302,7 @@ ipv6_tcp_md5_novrf()
log_start
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: Prefix config"
# client in prefix, wrong password
@@ -2310,7 +2310,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Prefix config, client uses wrong password"
# client outside of prefix
@@ -2318,7 +2318,7 @@ ipv6_tcp_md5_novrf()
show_hint "Should timeout due to MD5 mismatch"
run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
@@ -2335,7 +2335,7 @@ ipv6_tcp_md5()
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
# client sends MD5, server not configured
@@ -2343,7 +2343,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since server does not have MD5 auth"
run_cmd nettest -6 -s -d ${VRF} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
# wrong password
@@ -2351,7 +2351,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
# client from different address
@@ -2359,7 +2359,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since server config differs from client"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
#
@@ -2370,7 +2370,7 @@ ipv6_tcp_md5()
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
# client in prefix, wrong password
@@ -2378,7 +2378,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since client uses wrong password"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
# client outside of prefix
@@ -2386,7 +2386,7 @@ ipv6_tcp_md5()
show_hint "Should timeout since client address is outside of prefix"
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
#
@@ -2397,14 +2397,14 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
@@ -2412,7 +2412,7 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -2420,21 +2420,21 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
log_start
@@ -2442,7 +2442,7 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+ run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
@@ -2450,7 +2450,7 @@ ipv6_tcp_md5()
run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
sleep 1
- run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+ run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
#
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
index 8a3ddc51883f..a835cab08029 100644
--- a/tools/testing/selftests/net/nettest.c
+++ b/tools/testing/selftests/net/nettest.c
@@ -85,6 +85,7 @@ struct sock_args {
const char *serverns;
const char *password;
+ const char *client_pw;
/* prefix for MD5 password */
const char *md5_prefix_str;
union {
@@ -1653,6 +1654,8 @@ static int do_client(struct sock_args *args)
break;
}
+ args->password = args->client_pw;
+
if (args->has_grp)
sd = msock_client(args);
else
@@ -1761,7 +1764,7 @@ static int ipc_parent(int cpid, int fd, struct sock_args *args)
return client_status;
}
-#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:m:d:BN:O:SCi6L:0:1:2:Fbq"
+#define GETOPT_STR "sr:l:p:t:g:P:DRn:M:X:m:d:BN:O:SCi6L:0:1:2:Fbq"
static void print_usage(char *prog)
{
@@ -1793,6 +1796,7 @@ static void print_usage(char *prog)
" -n num number of times to send message\n"
"\n"
" -M password use MD5 sum protection\n"
+ " -X password MD5 password for client mode\n"
" -m prefix/len prefix and length to use for MD5 key\n"
" -g grp multicast group (e.g., 239.1.1.1)\n"
" -i interactive mode (default is echo and terminate)\n"
@@ -1897,6 +1901,9 @@ int main(int argc, char *argv[])
case 'M':
args.password = optarg;
break;
+ case 'X':
+ args.client_pw = optarg;
+ break;
case 'm':
args.md5_prefix_str = optarg;
break;
--
2.24.3 (Apple Git-128)
next prev parent reply other threads:[~2021-01-10 0:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-10 0:18 [PATCH net-next v2 00/11] selftests: Updates to allow single instance of nettest for client and server David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 01/11] selftests: Move device validation in nettest David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 02/11] selftests: Move convert_addr up " David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 03/11] selftests: Move address validation " David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 04/11] selftests: Add options to set network namespace to nettest David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 05/11] selftests: Add support to nettest to run both client and server David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 06/11] selftests: Use separate stdout and stderr buffers in nettest David Ahern
2021-01-12 0:15 ` Jakub Kicinski
2021-01-12 0:20 ` David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 07/11] selftests: Add missing newline in nettest error messages David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 08/11] selftests: Make address validation apply only to client mode David Ahern
2021-01-10 0:18 ` [PATCH net-next v2 09/11] selftests: Consistently specify address for MD5 protection David Ahern
2021-01-10 0:18 ` David Ahern [this message]
2021-01-10 0:18 ` [PATCH net-next v2 11/11] selftests: Add separate options for server device bindings David Ahern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210110001852.35653-11-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=davem@davemloft.net \
--cc=dsahern@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=schoen@loyalty.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.