From: Padmarao Begari <padmarao.begari@microchip.com>
To: u-boot@lists.denx.de
Subject: [PATCH v9 5/7] riscv: dts: Add device tree for Microchip Icicle Kit
Date: Fri, 15 Jan 2021 08:20:39 +0530 [thread overview]
Message-ID: <20210115025041.3503-6-padmarao.begari@microchip.com> (raw)
In-Reply-To: <20210115025041.3503-1-padmarao.begari@microchip.com>
Add device tree for Microchip PolarFire SoC Icicle Kit.
Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
---
arch/riscv/dts/Makefile | 1 +
.../dts/microchip-mpfs-icicle-kit-u-boot.dtsi | 14 +
arch/riscv/dts/microchip-mpfs-icicle-kit.dts | 421 ++++++++++++++++++
3 files changed, 436 insertions(+)
create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi
create mode 100644 arch/riscv/dts/microchip-mpfs-icicle-kit.dts
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 3a6f96c67d..01331b0aa1 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -3,6 +3,7 @@
dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb
dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
+dtb-$(CONFIG_TARGET_MICROCHIP_ICICLE) += microchip-mpfs-icicle-kit.dtb
targets += $(dtb-y)
diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi b/arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi
new file mode 100644
index 0000000000..f60283fb6b
--- /dev/null
+++ b/arch/riscv/dts/microchip-mpfs-icicle-kit-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 Microchip Technology Inc.
+ * Padmarao Begari <padmarao.begari@microchip.com>
+ */
+
+/ {
+ aliases {
+ cpu1 = &cpu1;
+ cpu2 = &cpu2;
+ cpu3 = &cpu3;
+ cpu4 = &cpu4;
+ };
+};
diff --git a/arch/riscv/dts/microchip-mpfs-icicle-kit.dts b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
new file mode 100644
index 0000000000..e2b9decc94
--- /dev/null
+++ b/arch/riscv/dts/microchip-mpfs-icicle-kit.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 Microchip Technology Inc */
+
+/dts-v1/;
+#include "dt-bindings/clock/microchip-mpfs-clock.h"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define RTCCLK_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Microchip MPFS Icicle Kit";
+ compatible = "microchip,mpfs-icicle-kit";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &emac1;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ cpucomplex: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <RTCCLK_FREQ>;
+ cpu0: cpu at 0 {
+ clocks = <&clkcfg CLK_CPU>;
+ compatible = "sifive,e51", "sifive,rocket0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ reg = <0>;
+ riscv,isa = "rv64imac";
+ status = "disabled";
+ operating-points = <
+ /* kHz uV */
+ 600000 1100000
+ 300000 950000
+ 150000 750000
+ >;
+ cpu0intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu1: cpu at 1 {
+ clocks = <&clkcfg CLK_CPU>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <1>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+ operating-points = <
+ /* kHz uV */
+ 600000 1100000
+ 300000 950000
+ 150000 750000
+ >;
+ cpu1intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu2: cpu at 2 {
+ clocks = <&clkcfg CLK_CPU>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <2>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+ operating-points = <
+ /* kHz uV */
+ 600000 1100000
+ 300000 950000
+ 150000 750000
+ >;
+ cpu2intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu3: cpu at 3 {
+ clocks = <&clkcfg CLK_CPU>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <3>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+ operating-points = <
+ /* kHz uV */
+ 600000 1100000
+ 300000 950000
+ 150000 750000
+ >;
+ cpu3intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu4: cpu at 4 {
+ clocks = <&clkcfg CLK_CPU>;
+ compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <32>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <64>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <32>;
+ mmu-type = "riscv,sv39";
+ reg = <4>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ status = "okay";
+ operating-points = <
+ /* kHz uV */
+ 600000 1100000
+ 300000 950000
+ 150000 750000
+ >;
+ cpu4intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ clock-output-names = "msspllclk";
+ };
+ ddr: memory at 80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x40000000>;
+ clocks = <&clkcfg CLK_DDRC>;
+ };
+ soc: soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "microchip,mpfs-icicle-kit", "simple-bus";
+ ranges;
+ clint0: clint at 2000000 {
+ compatible = "riscv,clint0";
+ interrupts-extended = <&cpu0intc 3 &cpu0intc 7
+ &cpu1intc 3 &cpu1intc 7
+ &cpu2intc 3 &cpu2intc 7
+ &cpu3intc 3 &cpu3intc 7
+ &cpu4intc 3 &cpu4intc 7>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ reg-names = "control";
+ clock-frequency = <RTCCLK_FREQ>;
+ };
+ cachecontroller: cache-controller at 2010000 {
+ compatible = "sifive,fu540-c000-ccache", "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <1024>;
+ cache-size = <2097152>;
+ cache-unified;
+ interrupt-parent = <&plic>;
+ interrupts = <1 2 3>;
+ reg = <0x0 0x2010000 0x0 0x1000>;
+ };
+ plic: interrupt-controller at c000000 {
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ riscv,max-priority = <7>;
+ riscv,ndev = <186>;
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0intc 11
+ &cpu1intc 11 &cpu1intc 9
+ &cpu2intc 11 &cpu2intc 9
+ &cpu3intc 11 &cpu3intc 9
+ &cpu4intc 11 &cpu4intc 9>;
+ };
+ uart0: serial at 20000000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20000000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <90>;
+ clock-frequency = <150000000>;
+ clocks = <&clkcfg CLK_MMUART0>;
+ status = "okay";
+ };
+ clkcfg: clkcfg at 20002000 {
+ compatible = "microchip,mpfs-clkcfg";
+ reg = <0x0 0x20002000 0x0 0x1000>;
+ reg-names = "mss_sysreg";
+ clocks = <&refclk>;
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "axi", "ahb", "envm",
+ "mac0", "mac1", "mmc", "timer",
+ "mmuart0", "mmuart1", "mmuart2",
+ "mmuart3", "mmuart4", "spi0", "spi1",
+ "i2c0", "i2c1", "can0", "can1", "usb",
+ "reserved", "rtc", "qspi", "gpio0",
+ "gpio1", "gpio2", "ddrc", "fic0",
+ "fic1", "fic2", "fic3", "athena",
+ "cfm";
+ };
+ emmc: mmc at 20008000 {
+ compatible = "cdns,sd4hc";
+ reg = <0x0 0x20008000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <88 89>;
+ pinctrl-names = "default";
+ clocks = <&clkcfg CLK_MMC>;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ mmc-ddr-3_3v;
+ max-frequency = <200000000>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ voltage-ranges = <3300 3300>;
+ status = "okay";
+ };
+ sdcard: sd at 20008000 {
+ compatible = "cdns,sd4hc";
+ reg = <0x0 0x20008000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <88>;
+ pinctrl-names = "default";
+ clocks = <&clkcfg CLK_MMC>;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+ uart1: serial at 20100000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20100000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <91>;
+ clock-frequency = <150000000>;
+ clocks = <&clkcfg CLK_MMUART1>;
+ status = "okay";
+ };
+ uart2: serial at 20102000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20102000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <92>;
+ clock-frequency = <150000000>;
+ clocks = <&clkcfg CLK_MMUART2>;
+ status = "okay";
+ };
+ uart3: serial at 20104000 {
+ compatible = "ns16550a";
+ reg = <0x0 0x20104000 0x0 0x400>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ interrupt-parent = <&plic>;
+ interrupts = <93>;
+ clock-frequency = <150000000>;
+ clocks = <&clkcfg CLK_MMUART3>;
+ status = "okay";
+ };
+ i2c0: i2c at 2010a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "microchip,mpfs-mss-i2c";
+ reg = <0x0 0x2010a000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <58>;
+ clocks = <&clkcfg CLK_I2C0>;
+ status = "disabled";
+ };
+ i2c1: i2c at 2010b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "microchip,mpfs-mss-i2c";
+ reg = <0x0 0x2010b000 0x0 0x1000>;
+ interrupt-parent = <&plic>;
+ interrupts = <61>;
+ clocks = <&clkcfg CLK_I2C1>;
+ status = "disabled";
+ pac193x at 10 {
+ compatible = "microchip,pac1934";
+ reg = <0x10>;
+ samp-rate = <64>;
+ status = "disabled";
+ ch1: channel0 {
+ uohms-shunt-res = <10000>;
+ rail-name = "VDD";
+ channel_enabled;
+ };
+ ch2: channel1 {
+ uohms-shunt-res = <10000>;
+ rail-name = "VDDA25";
+ channel_enabled;
+ };
+ ch3: channel2 {
+ uohms-shunt-res = <10000>;
+ rail-name = "VDD25";
+ channel_enabled;
+ };
+ ch4: channel3 {
+ uohms-shunt-res = <10000>;
+ rail-name = "VDDA";
+ channel_enabled;
+ };
+ };
+ };
+ emac0: ethernet at 20110000 {
+ compatible = "microchip,mpfs-mss-gem";
+ reg = <0x0 0x20110000 0x0 0x2000>;
+ interrupt-parent = <&plic>;
+ interrupts = <64 65 66 67>;
+ local-mac-address = [56 34 00 FC 00 02];
+ phy-mode = "sgmii";
+ clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AXI>;
+ clock-names = "pclk", "hclk";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy at 8 {
+ reg = <8>;
+ ti,fifo-depth = <0x01>;
+ };
+ };
+ emac1: ethernet at 20112000 {
+ compatible = "microchip,mpfs-mss-gem";
+ reg = <0x0 0x20112000 0x0 0x2000>;
+ interrupt-parent = <&plic>;
+ interrupts = <70 71 72 73>;
+ local-mac-address = [00 00 00 00 00 00];
+ phy-mode = "sgmii";
+ clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
+ clock-names = "pclk", "hclk";
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy1>;
+ phy1: ethernet-phy at 9 {
+ reg = <9>;
+ ti,fifo-depth = <0x01>;
+ };
+ };
+ gpio: gpio at 20122000 {
+ compatible = "microchip,mpfs-mss-gpio";
+ interrupt-parent = <&plic>;
+ interrupts = <13 14 15 16 17 18 19 20 21 22 23 24 25 26
+ 27 28 29 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44>;
+ gpio-controller;
+ clocks = <&clkcfg CLK_GPIO2>;
+ reg = <0x00 0x20122000 0x0 0x1000>;
+ reg-names = "control";
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+ };
+};
--
2.17.1
next prev parent reply other threads:[~2021-01-15 2:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 2:50 [PATCH v9 0/7] Microchip PolarFire SoC support Padmarao Begari
2021-01-15 2:50 ` [PATCH v9 1/7] riscv: Add DMA 64-bit address support Padmarao Begari
2021-01-15 2:50 ` [PATCH v9 2/7] net: macb: Add DMA 64-bit address support for macb Padmarao Begari
2021-01-15 2:50 ` [PATCH v9 3/7] net: macb: Add phy address to read it from device tree Padmarao Begari
2021-01-15 2:50 ` [PATCH v9 4/7] clk: Add Microchip PolarFire SoC clock driver Padmarao Begari
2021-01-15 2:50 ` Padmarao Begari [this message]
2021-01-15 2:50 ` [PATCH v9 6/7] riscv: Add Microchip MPFS Icicle Kit support Padmarao Begari
2021-01-15 2:50 ` [PATCH v9 7/7] doc: board: Add Microchip MPFS Icicle Kit doc Padmarao Begari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115025041.3503-6-padmarao.begari@microchip.com \
--to=padmarao.begari@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.