From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>
Cc: soc@kernel.org, linux-arm-kernel@lists.infradead.org,
kernel@pengutronix.de
Subject: [PATCH v2 1/7] ARM: drop efm32 platform
Date: Fri, 15 Jan 2021 16:51:24 +0100 [thread overview]
Message-ID: <20210115155130.185010-2-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20210115155130.185010-1-u.kleine-koenig@pengutronix.de>
I didn't touch this code since it served as a platform to introduce
ARMv7-M support to Linux. The only known machine that runs Linux has only
4 MiB of RAM (that originally only exists to hold the display's framebuffer).
There are no known users and no further use foreseeable, so drop the
code.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
arch/arm/Kconfig | 10 +-
arch/arm/Kconfig.debug | 17 ---
arch/arm/Makefile | 1 -
arch/arm/boot/dts/Makefile | 2 -
arch/arm/boot/dts/efm32gg-dk3750.dts | 88 -------------
arch/arm/boot/dts/efm32gg.dtsi | 177 ---------------------------
arch/arm/configs/efm32_defconfig | 98 ---------------
arch/arm/include/debug/efm32.S | 45 -------
arch/arm/mach-efm32/Makefile | 2 -
arch/arm/mach-efm32/Makefile.boot | 4 -
arch/arm/mach-efm32/dtmachine.c | 16 ---
arch/arm/mm/Kconfig | 1 -
12 files changed, 1 insertion(+), 460 deletions(-)
delete mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts
delete mode 100644 arch/arm/boot/dts/efm32gg.dtsi
delete mode 100644 arch/arm/configs/efm32_defconfig
delete mode 100644 arch/arm/include/debug/efm32.S
delete mode 100644 arch/arm/mach-efm32/Makefile
delete mode 100644 arch/arm/mach-efm32/Makefile.boot
delete mode 100644 arch/arm/mach-efm32/dtmachine.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 138248999df7..d31f3d74ce9b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -727,14 +727,6 @@ source "arch/arm/mach-zx/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
# ARMv7-M architecture
-config ARCH_EFM32
- bool "Energy Micro efm32"
- depends on ARM_SINGLE_ARMV7M
- select GPIOLIB
- help
- Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
- processors.
-
config ARCH_LPC18XX
bool "NXP LPC18xx/LPC43xx"
depends on ARM_SINGLE_ARMV7M
@@ -1552,7 +1544,7 @@ config ARM_MODULE_PLTS
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "12" if SOC_AM33XX
- default "9" if SA1111 || ARCH_EFM32
+ default "9" if SA1111
default "11"
help
The kernel memory allocator divides physically contiguous memory
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4ff04201a8cc..46458f9f99fc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1456,20 +1456,6 @@ choice
options; the platform specific options are deprecated
and will be soon removed.
- config DEBUG_LL_UART_EFM32
- bool "Kernel low-level debugging via efm32 UART"
- depends on ARCH_EFM32
- help
- Say Y here if you want the debug print routines to direct
- their output to an UART or USART port on efm32 based
- machines. Use the following addresses for DEBUG_UART_PHYS:
-
- 0x4000c000 | USART0
- 0x4000c400 | USART1
- 0x4000c800 | USART2
- 0x4000e000 | UART0
- 0x4000e400 | UART1
-
config DEBUG_LL_UART_PL01X
bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
help
@@ -1587,7 +1573,6 @@ config DEBUG_LL_INCLUDE
default "debug/meson.S" if DEBUG_MESON_UARTAO
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
default "debug/exynos.S" if DEBUG_EXYNOS_UART
- default "debug/efm32.S" if DEBUG_LL_UART_EFM32
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
@@ -1682,7 +1667,6 @@ config DEBUG_UART_PHYS
default 0x20201000 if DEBUG_BCM2835
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x3f201000 if DEBUG_BCM2836
- default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40010000 if STM32MP1_DEBUG_UART
default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
STM32H7_DEBUG_UART
@@ -1768,7 +1752,6 @@ config DEBUG_UART_PHYS
default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
- DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4aaec9599e8a..c1cf77805e9a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -168,7 +168,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3d1ea0b25168..325e167d3404 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,8 +177,6 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-lego-ev3.dtb
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_EFM32) += \
- efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-artik5-eval.dtb \
exynos3250-monk.dtb \
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
deleted file mode 100644
index adfa559a488b..000000000000
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for EFM32GG-DK3750 development board.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
- */
-
-/dts-v1/;
-#include "efm32gg.dtsi"
-
-/ {
- model = "Energy Micro Giant Gecko Development Kit";
- compatible = "efm32,dk3750";
-
- chosen {
- bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
- };
-
- memory@88000000 {
- device_type = "memory";
- reg = <0x88000000 0x400000>;
- };
-
- soc {
- adc@40002000 {
- status = "ok";
- };
-
- i2c@4000a000 {
- energymicro,location = <3>;
- status = "ok";
-
- temp@48 {
- compatible = "st,stds75";
- reg = <0x48>;
- };
-
- eeprom@50 {
- compatible = "microchip,24c02", "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
- };
-
- spi0: spi@4000c000 { /* USART0 */
- cs-gpios = <&gpio 68 1>; // E4
- energymicro,location = <1>;
- status = "ok";
-
- microsd@0 {
- compatible = "mmc-spi-slot";
- spi-max-frequency = <100000>;
- voltage-ranges = <3200 3400>;
- broken-cd;
- reg = <0>;
- };
- };
-
- spi1: spi@4000c400 { /* USART1 */
- cs-gpios = <&gpio 51 1>; // D3
- energymicro,location = <1>;
- status = "ok";
-
- ks8851@0 {
- compatible = "ks8851";
- spi-max-frequency = <6000000>;
- reg = <0>;
- interrupt-parent = <&boardfpga>;
- interrupts = <4>;
- };
- };
-
- uart4: uart@4000e400 { /* UART1 */
- energymicro,location = <2>;
- status = "ok";
- };
-
- boardfpga: boardfpga@80000000 {
- compatible = "efm32board";
- reg = <0x80000000 0x400>;
- irq-gpios = <&gpio 64 1>;
- interrupt-controller;
- #interrupt-cells = <1>;
- status = "ok";
- };
- };
-};
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
deleted file mode 100644
index 8a58e49144cc..000000000000
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for Energy Micro EFM32 Giant Gecko SoC.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
- */
-
-#include "armv7-m.dtsi"
-#include "dt-bindings/clock/efm32-cmu.h"
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- };
-
- soc {
- adc: adc@40002000 {
- compatible = "energymicro,efm32-adc";
- reg = <0x40002000 0x400>;
- interrupts = <7>;
- clocks = <&cmu clk_HFPERCLKADC0>;
- status = "disabled";
- };
-
- gpio: gpio@40006000 {
- compatible = "energymicro,efm32-gpio";
- reg = <0x40006000 0x1000>;
- interrupts = <1 11>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <1>;
- clocks = <&cmu clk_HFPERCLKGPIO>;
- status = "ok";
- };
-
- i2c0: i2c@4000a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-i2c";
- reg = <0x4000a000 0x400>;
- interrupts = <9>;
- clocks = <&cmu clk_HFPERCLKI2C0>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c1: i2c@4000a400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-i2c";
- reg = <0x4000a400 0x400>;
- interrupts = <10>;
- clocks = <&cmu clk_HFPERCLKI2C1>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- spi0: spi@4000c000 { /* USART0 */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-spi";
- reg = <0x4000c000 0x400>;
- interrupts = <3 4>;
- clocks = <&cmu clk_HFPERCLKUSART0>;
- status = "disabled";
- };
-
- spi1: spi@4000c400 { /* USART1 */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-spi";
- reg = <0x4000c400 0x400>;
- interrupts = <15 16>;
- clocks = <&cmu clk_HFPERCLKUSART1>;
- status = "disabled";
- };
-
- spi2: spi@4000c800 { /* USART2 */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-spi";
- reg = <0x4000c800 0x400>;
- interrupts = <18 19>;
- clocks = <&cmu clk_HFPERCLKUSART2>;
- status = "disabled";
- };
-
- uart0: uart@4000c000 { /* USART0 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000c000 0x400>;
- interrupts = <3 4>;
- clocks = <&cmu clk_HFPERCLKUSART0>;
- status = "disabled";
- };
-
- uart1: uart@4000c400 { /* USART1 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000c400 0x400>;
- interrupts = <15 16>;
- clocks = <&cmu clk_HFPERCLKUSART1>;
- status = "disabled";
- };
-
- uart2: uart@4000c800 { /* USART2 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000c800 0x400>;
- interrupts = <18 19>;
- clocks = <&cmu clk_HFPERCLKUSART2>;
- status = "disabled";
- };
-
- uart3: uart@4000e000 { /* UART0 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000e000 0x400>;
- interrupts = <20 21>;
- clocks = <&cmu clk_HFPERCLKUART0>;
- status = "disabled";
- };
-
- uart4: uart@4000e400 { /* UART1 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000e400 0x400>;
- interrupts = <22 23>;
- clocks = <&cmu clk_HFPERCLKUART1>;
- status = "disabled";
- };
-
- timer0: timer@40010000 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010000 0x400>;
- interrupts = <2>;
- clocks = <&cmu clk_HFPERCLKTIMER0>;
- };
-
- timer1: timer@40010400 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010400 0x400>;
- interrupts = <12>;
- clocks = <&cmu clk_HFPERCLKTIMER1>;
- };
-
- timer2: timer@40010800 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010800 0x400>;
- interrupts = <13>;
- clocks = <&cmu clk_HFPERCLKTIMER2>;
- };
-
- timer3: timer@40010c00 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010c00 0x400>;
- interrupts = <14>;
- clocks = <&cmu clk_HFPERCLKTIMER3>;
- };
-
- cmu: cmu@400c8000 {
- compatible = "efm32gg,cmu";
- reg = <0x400c8000 0x400>;
- interrupts = <32>;
- #clock-cells = <1>;
- };
- };
-};
diff --git a/arch/arm/configs/efm32_defconfig b/arch/arm/configs/efm32_defconfig
deleted file mode 100644
index 46213f0530c4..000000000000
--- a/arch/arm/configs/efm32_defconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=12
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_UID16 is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_MMU is not set
-CONFIG_ARM_SINGLE_ARMV7M=y
-CONFIG_ARCH_EFM32=y
-CONFIG_SET_MEM_PARAM=y
-CONFIG_DRAM_BASE=0x88000000
-CONFIG_DRAM_SIZE=0x00400000
-CONFIG_FLASH_MEM_BASE=0x8c000000
-CONFIG_FLASH_SIZE=0x01000000
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_XIP_KERNEL=y
-CONFIG_XIP_PHYS_ADDR=0x8c000000
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_COREDUMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_UCLINUX=y
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-CONFIG_KS8851=y
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_EFM32_UART=y
-CONFIG_SERIAL_EFM32_UART_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_EFM32=y
-CONFIG_SPI=y
-CONFIG_SPI_EFM32=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S
deleted file mode 100644
index b0083d6e31e8..000000000000
--- a/arch/arm/include/debug/efm32.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2013 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-
-#define UARTn_CMD 0x000c
-#define UARTn_CMD_TXEN 0x0004
-
-#define UARTn_STATUS 0x0010
-#define UARTn_STATUS_TXC 0x0020
-#define UARTn_STATUS_TXBL 0x0040
-
-#define UARTn_TXDATA 0x0034
-
- .macro addruart, rx, tmp, tmp2
- ldr \rx, =(CONFIG_DEBUG_UART_PHYS)
-
- /*
- * enable TX. The driver might disable it to save energy. We
- * don't care about disabling at the end as during debug power
- * consumption isn't that important.
- */
- ldr \tmp, =(UARTn_CMD_TXEN)
- str \tmp, [\rx, #UARTn_CMD]
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #UARTn_TXDATA]
- .endm
-
- .macro waituartcts,rd,rx
- .endm
-
- .macro waituarttxrdy,rd,rx
-1001: ldr \rd, [\rx, #UARTn_STATUS]
- tst \rd, #UARTn_STATUS_TXBL
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, UARTn_STATUS]
- tst \rd, #UARTn_STATUS_TXC
- bne 1001b
- .endm
diff --git a/arch/arm/mach-efm32/Makefile b/arch/arm/mach-efm32/Makefile
deleted file mode 100644
index dede3fa55a76..000000000000
--- a/arch/arm/mach-efm32/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += dtmachine.o
diff --git a/arch/arm/mach-efm32/Makefile.boot b/arch/arm/mach-efm32/Makefile.boot
deleted file mode 100644
index cec195d4fcba..000000000000
--- a/arch/arm/mach-efm32/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-efm32/dtmachine.c b/arch/arm/mach-efm32/dtmachine.c
deleted file mode 100644
index e9364b843641..000000000000
--- a/arch/arm/mach-efm32/dtmachine.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-
-#include <asm/v7m.h>
-
-#include <asm/mach/arch.h>
-
-static const char *const efm32gg_compat[] __initconst = {
- "efm32,dk3750",
- NULL
-};
-
-DT_MACHINE_START(EFM32DT, "EFM32 (Device Tree Support)")
- .dt_compat = efm32gg_compat,
- .restart = armv7m_restart,
-MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 02692fbe2db5..35f43d0aa056 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -638,7 +638,6 @@ config CPU_V7M_NUM_IRQ
int "Number of external interrupts connected to the NVIC"
depends on CPU_V7M
default 90 if ARCH_STM32
- default 38 if ARCH_EFM32
default 112 if SOC_VF610
default 240
help
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>
Cc: soc@kernel.org, kernel@pengutronix.de,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/7] ARM: drop efm32 platform
Date: Fri, 15 Jan 2021 16:51:24 +0100 [thread overview]
Message-ID: <20210115155130.185010-2-u.kleine-koenig@pengutronix.de> (raw)
Message-ID: <20210115155124.3eo4o6xMbm-yAlhFmviCXU7rNa6yv6GH7laK4XuPq5k@z> (raw)
In-Reply-To: <20210115155130.185010-1-u.kleine-koenig@pengutronix.de>
I didn't touch this code since it served as a platform to introduce
ARMv7-M support to Linux. The only known machine that runs Linux has only
4 MiB of RAM (that originally only exists to hold the display's framebuffer).
There are no known users and no further use foreseeable, so drop the
code.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
arch/arm/Kconfig | 10 +-
arch/arm/Kconfig.debug | 17 ---
arch/arm/Makefile | 1 -
arch/arm/boot/dts/Makefile | 2 -
arch/arm/boot/dts/efm32gg-dk3750.dts | 88 -------------
arch/arm/boot/dts/efm32gg.dtsi | 177 ---------------------------
arch/arm/configs/efm32_defconfig | 98 ---------------
arch/arm/include/debug/efm32.S | 45 -------
arch/arm/mach-efm32/Makefile | 2 -
arch/arm/mach-efm32/Makefile.boot | 4 -
arch/arm/mach-efm32/dtmachine.c | 16 ---
arch/arm/mm/Kconfig | 1 -
12 files changed, 1 insertion(+), 460 deletions(-)
delete mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts
delete mode 100644 arch/arm/boot/dts/efm32gg.dtsi
delete mode 100644 arch/arm/configs/efm32_defconfig
delete mode 100644 arch/arm/include/debug/efm32.S
delete mode 100644 arch/arm/mach-efm32/Makefile
delete mode 100644 arch/arm/mach-efm32/Makefile.boot
delete mode 100644 arch/arm/mach-efm32/dtmachine.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 138248999df7..d31f3d74ce9b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -727,14 +727,6 @@ source "arch/arm/mach-zx/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
# ARMv7-M architecture
-config ARCH_EFM32
- bool "Energy Micro efm32"
- depends on ARM_SINGLE_ARMV7M
- select GPIOLIB
- help
- Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
- processors.
-
config ARCH_LPC18XX
bool "NXP LPC18xx/LPC43xx"
depends on ARM_SINGLE_ARMV7M
@@ -1552,7 +1544,7 @@ config ARM_MODULE_PLTS
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
default "12" if SOC_AM33XX
- default "9" if SA1111 || ARCH_EFM32
+ default "9" if SA1111
default "11"
help
The kernel memory allocator divides physically contiguous memory
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4ff04201a8cc..46458f9f99fc 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1456,20 +1456,6 @@ choice
options; the platform specific options are deprecated
and will be soon removed.
- config DEBUG_LL_UART_EFM32
- bool "Kernel low-level debugging via efm32 UART"
- depends on ARCH_EFM32
- help
- Say Y here if you want the debug print routines to direct
- their output to an UART or USART port on efm32 based
- machines. Use the following addresses for DEBUG_UART_PHYS:
-
- 0x4000c000 | USART0
- 0x4000c400 | USART1
- 0x4000c800 | USART2
- 0x4000e000 | UART0
- 0x4000e400 | UART1
-
config DEBUG_LL_UART_PL01X
bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
help
@@ -1587,7 +1573,6 @@ config DEBUG_LL_INCLUDE
default "debug/meson.S" if DEBUG_MESON_UARTAO
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
default "debug/exynos.S" if DEBUG_EXYNOS_UART
- default "debug/efm32.S" if DEBUG_LL_UART_EFM32
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
@@ -1682,7 +1667,6 @@ config DEBUG_UART_PHYS
default 0x20201000 if DEBUG_BCM2835
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x3f201000 if DEBUG_BCM2836
- default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40010000 if STM32MP1_DEBUG_UART
default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
STM32H7_DEBUG_UART
@@ -1768,7 +1752,6 @@ config DEBUG_UART_PHYS
default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
- DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4aaec9599e8a..c1cf77805e9a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -168,7 +168,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3d1ea0b25168..325e167d3404 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,8 +177,6 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-lego-ev3.dtb
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_EFM32) += \
- efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-artik5-eval.dtb \
exynos3250-monk.dtb \
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
deleted file mode 100644
index adfa559a488b..000000000000
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for EFM32GG-DK3750 development board.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
- */
-
-/dts-v1/;
-#include "efm32gg.dtsi"
-
-/ {
- model = "Energy Micro Giant Gecko Development Kit";
- compatible = "efm32,dk3750";
-
- chosen {
- bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
- };
-
- memory@88000000 {
- device_type = "memory";
- reg = <0x88000000 0x400000>;
- };
-
- soc {
- adc@40002000 {
- status = "ok";
- };
-
- i2c@4000a000 {
- energymicro,location = <3>;
- status = "ok";
-
- temp@48 {
- compatible = "st,stds75";
- reg = <0x48>;
- };
-
- eeprom@50 {
- compatible = "microchip,24c02", "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
- };
-
- spi0: spi@4000c000 { /* USART0 */
- cs-gpios = <&gpio 68 1>; // E4
- energymicro,location = <1>;
- status = "ok";
-
- microsd@0 {
- compatible = "mmc-spi-slot";
- spi-max-frequency = <100000>;
- voltage-ranges = <3200 3400>;
- broken-cd;
- reg = <0>;
- };
- };
-
- spi1: spi@4000c400 { /* USART1 */
- cs-gpios = <&gpio 51 1>; // D3
- energymicro,location = <1>;
- status = "ok";
-
- ks8851@0 {
- compatible = "ks8851";
- spi-max-frequency = <6000000>;
- reg = <0>;
- interrupt-parent = <&boardfpga>;
- interrupts = <4>;
- };
- };
-
- uart4: uart@4000e400 { /* UART1 */
- energymicro,location = <2>;
- status = "ok";
- };
-
- boardfpga: boardfpga@80000000 {
- compatible = "efm32board";
- reg = <0x80000000 0x400>;
- irq-gpios = <&gpio 64 1>;
- interrupt-controller;
- #interrupt-cells = <1>;
- status = "ok";
- };
- };
-};
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
deleted file mode 100644
index 8a58e49144cc..000000000000
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for Energy Micro EFM32 Giant Gecko SoC.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
- */
-
-#include "armv7-m.dtsi"
-#include "dt-bindings/clock/efm32-cmu.h"
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- };
-
- soc {
- adc: adc@40002000 {
- compatible = "energymicro,efm32-adc";
- reg = <0x40002000 0x400>;
- interrupts = <7>;
- clocks = <&cmu clk_HFPERCLKADC0>;
- status = "disabled";
- };
-
- gpio: gpio@40006000 {
- compatible = "energymicro,efm32-gpio";
- reg = <0x40006000 0x1000>;
- interrupts = <1 11>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <1>;
- clocks = <&cmu clk_HFPERCLKGPIO>;
- status = "ok";
- };
-
- i2c0: i2c@4000a000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-i2c";
- reg = <0x4000a000 0x400>;
- interrupts = <9>;
- clocks = <&cmu clk_HFPERCLKI2C0>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c1: i2c@4000a400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-i2c";
- reg = <0x4000a400 0x400>;
- interrupts = <10>;
- clocks = <&cmu clk_HFPERCLKI2C1>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- spi0: spi@4000c000 { /* USART0 */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-spi";
- reg = <0x4000c000 0x400>;
- interrupts = <3 4>;
- clocks = <&cmu clk_HFPERCLKUSART0>;
- status = "disabled";
- };
-
- spi1: spi@4000c400 { /* USART1 */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-spi";
- reg = <0x4000c400 0x400>;
- interrupts = <15 16>;
- clocks = <&cmu clk_HFPERCLKUSART1>;
- status = "disabled";
- };
-
- spi2: spi@4000c800 { /* USART2 */
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "energymicro,efm32-spi";
- reg = <0x4000c800 0x400>;
- interrupts = <18 19>;
- clocks = <&cmu clk_HFPERCLKUSART2>;
- status = "disabled";
- };
-
- uart0: uart@4000c000 { /* USART0 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000c000 0x400>;
- interrupts = <3 4>;
- clocks = <&cmu clk_HFPERCLKUSART0>;
- status = "disabled";
- };
-
- uart1: uart@4000c400 { /* USART1 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000c400 0x400>;
- interrupts = <15 16>;
- clocks = <&cmu clk_HFPERCLKUSART1>;
- status = "disabled";
- };
-
- uart2: uart@4000c800 { /* USART2 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000c800 0x400>;
- interrupts = <18 19>;
- clocks = <&cmu clk_HFPERCLKUSART2>;
- status = "disabled";
- };
-
- uart3: uart@4000e000 { /* UART0 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000e000 0x400>;
- interrupts = <20 21>;
- clocks = <&cmu clk_HFPERCLKUART0>;
- status = "disabled";
- };
-
- uart4: uart@4000e400 { /* UART1 */
- compatible = "energymicro,efm32-uart";
- reg = <0x4000e400 0x400>;
- interrupts = <22 23>;
- clocks = <&cmu clk_HFPERCLKUART1>;
- status = "disabled";
- };
-
- timer0: timer@40010000 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010000 0x400>;
- interrupts = <2>;
- clocks = <&cmu clk_HFPERCLKTIMER0>;
- };
-
- timer1: timer@40010400 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010400 0x400>;
- interrupts = <12>;
- clocks = <&cmu clk_HFPERCLKTIMER1>;
- };
-
- timer2: timer@40010800 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010800 0x400>;
- interrupts = <13>;
- clocks = <&cmu clk_HFPERCLKTIMER2>;
- };
-
- timer3: timer@40010c00 {
- compatible = "energymicro,efm32-timer";
- reg = <0x40010c00 0x400>;
- interrupts = <14>;
- clocks = <&cmu clk_HFPERCLKTIMER3>;
- };
-
- cmu: cmu@400c8000 {
- compatible = "efm32gg,cmu";
- reg = <0x400c8000 0x400>;
- interrupts = <32>;
- #clock-cells = <1>;
- };
- };
-};
diff --git a/arch/arm/configs/efm32_defconfig b/arch/arm/configs/efm32_defconfig
deleted file mode 100644
index 46213f0530c4..000000000000
--- a/arch/arm/configs/efm32_defconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=12
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_UID16 is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_MMU is not set
-CONFIG_ARM_SINGLE_ARMV7M=y
-CONFIG_ARCH_EFM32=y
-CONFIG_SET_MEM_PARAM=y
-CONFIG_DRAM_BASE=0x88000000
-CONFIG_DRAM_SIZE=0x00400000
-CONFIG_FLASH_MEM_BASE=0x8c000000
-CONFIG_FLASH_SIZE=0x01000000
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_XIP_KERNEL=y
-CONFIG_XIP_PHYS_ADDR=0x8c000000
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_COREDUMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_UCLINUX=y
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-CONFIG_KS8851=y
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_EFM32_UART=y
-CONFIG_SERIAL_EFM32_UART_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_EFM32=y
-CONFIG_SPI=y
-CONFIG_SPI_EFM32=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SPI=y
-CONFIG_EXT2_FS=y
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_MTD=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S
deleted file mode 100644
index b0083d6e31e8..000000000000
--- a/arch/arm/include/debug/efm32.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2013 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-
-#define UARTn_CMD 0x000c
-#define UARTn_CMD_TXEN 0x0004
-
-#define UARTn_STATUS 0x0010
-#define UARTn_STATUS_TXC 0x0020
-#define UARTn_STATUS_TXBL 0x0040
-
-#define UARTn_TXDATA 0x0034
-
- .macro addruart, rx, tmp, tmp2
- ldr \rx, =(CONFIG_DEBUG_UART_PHYS)
-
- /*
- * enable TX. The driver might disable it to save energy. We
- * don't care about disabling at the end as during debug power
- * consumption isn't that important.
- */
- ldr \tmp, =(UARTn_CMD_TXEN)
- str \tmp, [\rx, #UARTn_CMD]
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #UARTn_TXDATA]
- .endm
-
- .macro waituartcts,rd,rx
- .endm
-
- .macro waituarttxrdy,rd,rx
-1001: ldr \rd, [\rx, #UARTn_STATUS]
- tst \rd, #UARTn_STATUS_TXBL
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, UARTn_STATUS]
- tst \rd, #UARTn_STATUS_TXC
- bne 1001b
- .endm
diff --git a/arch/arm/mach-efm32/Makefile b/arch/arm/mach-efm32/Makefile
deleted file mode 100644
index dede3fa55a76..000000000000
--- a/arch/arm/mach-efm32/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += dtmachine.o
diff --git a/arch/arm/mach-efm32/Makefile.boot b/arch/arm/mach-efm32/Makefile.boot
deleted file mode 100644
index cec195d4fcba..000000000000
--- a/arch/arm/mach-efm32/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-efm32/dtmachine.c b/arch/arm/mach-efm32/dtmachine.c
deleted file mode 100644
index e9364b843641..000000000000
--- a/arch/arm/mach-efm32/dtmachine.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-
-#include <asm/v7m.h>
-
-#include <asm/mach/arch.h>
-
-static const char *const efm32gg_compat[] __initconst = {
- "efm32,dk3750",
- NULL
-};
-
-DT_MACHINE_START(EFM32DT, "EFM32 (Device Tree Support)")
- .dt_compat = efm32gg_compat,
- .restart = armv7m_restart,
-MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 02692fbe2db5..35f43d0aa056 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -638,7 +638,6 @@ config CPU_V7M_NUM_IRQ
int "Number of external interrupts connected to the NVIC"
depends on CPU_V7M
default 90 if ARCH_STM32
- default 38 if ARCH_EFM32
default 112 if SOC_VF610
default 240
help
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-15 15:51 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 15:51 [PATCH v2 0/7] Remove ARM platform efm32 Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König [this message]
2021-01-15 15:51 ` [PATCH v2 1/7] ARM: drop efm32 platform Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 2/7] clk: Drop unused efm32gg driver Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 3/7] clocksource: Drop unused efm32 timer code Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-18 15:18 ` Daniel Lezcano
2021-01-18 15:18 ` Daniel Lezcano
2021-01-18 15:20 ` Arnd Bergmann
2021-01-18 15:20 ` Arnd Bergmann
2021-01-18 18:09 ` Daniel Lezcano
2021-01-18 18:09 ` Daniel Lezcano
2021-02-10 10:06 ` [tip: timers/core] clocksource/drivers/efm32: Drop unused " tip-bot2 for Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 4/7] spi: Drop unused efm32 bus driver Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 5/7] i2c: " Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-17 11:09 ` Wolfram Sang
2021-01-17 11:09 ` Wolfram Sang
2021-01-15 15:51 ` [PATCH v2 6/7] tty: serial: Drop unused efm32 serial driver Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 7/7] MAINTAINERS: Remove deleted platform efm32 Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-15 16:44 ` [PATCH v2 0/7] Remove ARM " Arnd Bergmann
2021-01-15 16:44 ` Arnd Bergmann
2021-01-15 16:48 ` Wolfram Sang
2021-01-15 16:48 ` Wolfram Sang
2021-01-16 8:02 ` Greg Kroah-Hartman
2021-01-16 8:02 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115155130.185010-2-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=arnd@arndb.de \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=olof@lixom.net \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.