All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	Wolfram Sang <wsa@kernel.org>
Cc: soc@kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de, linux-i2c@vger.kernel.org
Subject: [PATCH v2 5/7] i2c: Drop unused efm32 bus driver
Date: Fri, 15 Jan 2021 16:51:28 +0100	[thread overview]
Message-ID: <20210115155130.185010-6-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20210115155130.185010-1-u.kleine-koenig@pengutronix.de>

Support for this machine was just removed, so drop the now unused i2c
bus driver, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/i2c/busses/Kconfig     |   7 -
 drivers/i2c/busses/Makefile    |   1 -
 drivers/i2c/busses/i2c-efm32.c | 469 ---------------------------------
 3 files changed, 477 deletions(-)
 delete mode 100644 drivers/i2c/busses/i2c-efm32.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d4d60ad0eda0..fd919f9339d6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -586,13 +586,6 @@ config I2C_DIGICOLOR
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-digicolor.
 
-config I2C_EFM32
-	tristate "EFM32 I2C controller"
-	depends on ARCH_EFM32 || COMPILE_TEST
-	help
-	  This driver supports the i2c block found in Energy Micro's EFM32
-	  SoCs.
-
 config I2C_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
 	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 683c49faca05..894ff95885b8 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -58,7 +58,6 @@ i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-bayt
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)			+= i2c-designware-pci.o
 i2c-designware-pci-y					:= i2c-designware-pcidrv.o
 obj-$(CONFIG_I2C_DIGICOLOR)	+= i2c-digicolor.o
-obj-$(CONFIG_I2C_EFM32)		+= i2c-efm32.o
 obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EMEV2)		+= i2c-emev2.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
deleted file mode 100644
index f6e13ceeb2b3..000000000000
--- a/drivers/i2c/busses/i2c-efm32.c
+++ /dev/null
@@ -1,469 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Uwe Kleine-Koenig for Pengutronix
- */
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#define DRIVER_NAME "efm32-i2c"
-
-#define MASK_VAL(mask, val)		((val << __ffs(mask)) & mask)
-
-#define REG_CTRL		0x00
-#define REG_CTRL_EN			0x00001
-#define REG_CTRL_SLAVE			0x00002
-#define REG_CTRL_AUTOACK		0x00004
-#define REG_CTRL_AUTOSE			0x00008
-#define REG_CTRL_AUTOSN			0x00010
-#define REG_CTRL_ARBDIS			0x00020
-#define REG_CTRL_GCAMEN			0x00040
-#define REG_CTRL_CLHR__MASK		0x00300
-#define REG_CTRL_BITO__MASK		0x03000
-#define REG_CTRL_BITO_OFF		0x00000
-#define REG_CTRL_BITO_40PCC		0x01000
-#define REG_CTRL_BITO_80PCC		0x02000
-#define REG_CTRL_BITO_160PCC		0x03000
-#define REG_CTRL_GIBITO			0x08000
-#define REG_CTRL_CLTO__MASK		0x70000
-#define REG_CTRL_CLTO_OFF		0x00000
-
-#define REG_CMD			0x04
-#define REG_CMD_START			0x00001
-#define REG_CMD_STOP			0x00002
-#define REG_CMD_ACK			0x00004
-#define REG_CMD_NACK			0x00008
-#define REG_CMD_CONT			0x00010
-#define REG_CMD_ABORT			0x00020
-#define REG_CMD_CLEARTX			0x00040
-#define REG_CMD_CLEARPC			0x00080
-
-#define REG_STATE		0x08
-#define REG_STATE_BUSY			0x00001
-#define REG_STATE_MASTER		0x00002
-#define REG_STATE_TRANSMITTER		0x00004
-#define REG_STATE_NACKED		0x00008
-#define REG_STATE_BUSHOLD		0x00010
-#define REG_STATE_STATE__MASK		0x000e0
-#define REG_STATE_STATE_IDLE		0x00000
-#define REG_STATE_STATE_WAIT		0x00020
-#define REG_STATE_STATE_START		0x00040
-#define REG_STATE_STATE_ADDR		0x00060
-#define REG_STATE_STATE_ADDRACK		0x00080
-#define REG_STATE_STATE_DATA		0x000a0
-#define REG_STATE_STATE_DATAACK		0x000c0
-
-#define REG_STATUS		0x0c
-#define REG_STATUS_PSTART		0x00001
-#define REG_STATUS_PSTOP		0x00002
-#define REG_STATUS_PACK			0x00004
-#define REG_STATUS_PNACK		0x00008
-#define REG_STATUS_PCONT		0x00010
-#define REG_STATUS_PABORT		0x00020
-#define REG_STATUS_TXC			0x00040
-#define REG_STATUS_TXBL			0x00080
-#define REG_STATUS_RXDATAV		0x00100
-
-#define REG_CLKDIV		0x10
-#define REG_CLKDIV_DIV__MASK		0x001ff
-#define REG_CLKDIV_DIV(div)		MASK_VAL(REG_CLKDIV_DIV__MASK, (div))
-
-#define REG_SADDR		0x14
-#define REG_SADDRMASK		0x18
-#define REG_RXDATA		0x1c
-#define REG_RXDATAP		0x20
-#define REG_TXDATA		0x24
-#define REG_IF			0x28
-#define REG_IF_START			0x00001
-#define REG_IF_RSTART			0x00002
-#define REG_IF_ADDR			0x00004
-#define REG_IF_TXC			0x00008
-#define REG_IF_TXBL			0x00010
-#define REG_IF_RXDATAV			0x00020
-#define REG_IF_ACK			0x00040
-#define REG_IF_NACK			0x00080
-#define REG_IF_MSTOP			0x00100
-#define REG_IF_ARBLOST			0x00200
-#define REG_IF_BUSERR			0x00400
-#define REG_IF_BUSHOLD			0x00800
-#define REG_IF_TXOF			0x01000
-#define REG_IF_RXUF			0x02000
-#define REG_IF_BITO			0x04000
-#define REG_IF_CLTO			0x08000
-#define REG_IF_SSTOP			0x10000
-
-#define REG_IFS			0x2c
-#define REG_IFC			0x30
-#define REG_IFC__MASK			0x1ffcf
-
-#define REG_IEN			0x34
-
-#define REG_ROUTE		0x38
-#define REG_ROUTE_SDAPEN		0x00001
-#define REG_ROUTE_SCLPEN		0x00002
-#define REG_ROUTE_LOCATION__MASK	0x00700
-#define REG_ROUTE_LOCATION(n)		MASK_VAL(REG_ROUTE_LOCATION__MASK, (n))
-
-struct efm32_i2c_ddata {
-	struct i2c_adapter adapter;
-
-	struct clk *clk;
-	void __iomem *base;
-	unsigned int irq;
-	u8 location;
-	unsigned long frequency;
-
-	/* transfer data */
-	struct completion done;
-	struct i2c_msg *msgs;
-	size_t num_msgs;
-	size_t current_word, current_msg;
-	int retval;
-};
-
-static u32 efm32_i2c_read32(struct efm32_i2c_ddata *ddata, unsigned offset)
-{
-	return readl(ddata->base + offset);
-}
-
-static void efm32_i2c_write32(struct efm32_i2c_ddata *ddata,
-		unsigned offset, u32 value)
-{
-	writel(value, ddata->base + offset);
-}
-
-static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
-{
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-
-	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
-	efm32_i2c_write32(ddata, REG_TXDATA, i2c_8bit_addr_from_msg(cur_msg));
-}
-
-static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
-{
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-
-	if (ddata->current_word >= cur_msg->len) {
-		/* cur_msg completely transferred */
-		ddata->current_word = 0;
-		ddata->current_msg += 1;
-
-		if (ddata->current_msg >= ddata->num_msgs) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			complete(&ddata->done);
-		} else {
-			efm32_i2c_send_next_msg(ddata);
-		}
-	} else {
-		efm32_i2c_write32(ddata, REG_TXDATA,
-				cur_msg->buf[ddata->current_word++]);
-	}
-}
-
-static void efm32_i2c_recv_next_byte(struct efm32_i2c_ddata *ddata)
-{
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-
-	cur_msg->buf[ddata->current_word] = efm32_i2c_read32(ddata, REG_RXDATA);
-	ddata->current_word += 1;
-	if (ddata->current_word >= cur_msg->len) {
-		/* cur_msg completely transferred */
-		ddata->current_word = 0;
-		ddata->current_msg += 1;
-
-		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_NACK);
-
-		if (ddata->current_msg >= ddata->num_msgs) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			complete(&ddata->done);
-		} else {
-			efm32_i2c_send_next_msg(ddata);
-		}
-	} else {
-		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ACK);
-	}
-}
-
-static irqreturn_t efm32_i2c_irq(int irq, void *dev_id)
-{
-	struct efm32_i2c_ddata *ddata = dev_id;
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-	u32 irqflag = efm32_i2c_read32(ddata, REG_IF);
-	u32 state = efm32_i2c_read32(ddata, REG_STATE);
-
-	efm32_i2c_write32(ddata, REG_IFC, irqflag & REG_IFC__MASK);
-
-	switch (state & REG_STATE_STATE__MASK) {
-	case REG_STATE_STATE_IDLE:
-		/* arbitration lost? */
-		ddata->retval = -EAGAIN;
-		complete(&ddata->done);
-		break;
-	case REG_STATE_STATE_WAIT:
-		/*
-		 * huh, this shouldn't happen.
-		 * Reset hardware state and get out
-		 */
-		ddata->retval = -EIO;
-		efm32_i2c_write32(ddata, REG_CMD,
-				REG_CMD_STOP | REG_CMD_ABORT |
-				REG_CMD_CLEARTX | REG_CMD_CLEARPC);
-		complete(&ddata->done);
-		break;
-	case REG_STATE_STATE_START:
-		/* "caller" is expected to send an address */
-		break;
-	case REG_STATE_STATE_ADDR:
-		/* wait for Ack or NAck of slave */
-		break;
-	case REG_STATE_STATE_ADDRACK:
-		if (state & REG_STATE_NACKED) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			ddata->retval = -ENXIO;
-			complete(&ddata->done);
-		} else if (cur_msg->flags & I2C_M_RD) {
-			/* wait for slave to send first data byte */
-		} else {
-			efm32_i2c_send_next_byte(ddata);
-		}
-		break;
-	case REG_STATE_STATE_DATA:
-		if (cur_msg->flags & I2C_M_RD) {
-			efm32_i2c_recv_next_byte(ddata);
-		} else {
-			/* wait for Ack or Nack of slave */
-		}
-		break;
-	case REG_STATE_STATE_DATAACK:
-		if (state & REG_STATE_NACKED) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			complete(&ddata->done);
-		} else {
-			efm32_i2c_send_next_byte(ddata);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int efm32_i2c_master_xfer(struct i2c_adapter *adap,
-		struct i2c_msg *msgs, int num)
-{
-	struct efm32_i2c_ddata *ddata = i2c_get_adapdata(adap);
-	int ret;
-
-	if (ddata->msgs)
-		return -EBUSY;
-
-	ddata->msgs = msgs;
-	ddata->num_msgs = num;
-	ddata->current_word = 0;
-	ddata->current_msg = 0;
-	ddata->retval = -EIO;
-
-	reinit_completion(&ddata->done);
-
-	dev_dbg(&ddata->adapter.dev, "state: %08x, status: %08x\n",
-			efm32_i2c_read32(ddata, REG_STATE),
-			efm32_i2c_read32(ddata, REG_STATUS));
-
-	efm32_i2c_send_next_msg(ddata);
-
-	wait_for_completion(&ddata->done);
-
-	if (ddata->current_msg >= ddata->num_msgs)
-		ret = ddata->num_msgs;
-	else
-		ret = ddata->retval;
-
-	return ret;
-}
-
-static u32 efm32_i2c_functionality(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm efm32_i2c_algo = {
-	.master_xfer = efm32_i2c_master_xfer,
-	.functionality = efm32_i2c_functionality,
-};
-
-static u32 efm32_i2c_get_configured_location(struct efm32_i2c_ddata *ddata)
-{
-	u32 reg = efm32_i2c_read32(ddata, REG_ROUTE);
-
-	return (reg & REG_ROUTE_LOCATION__MASK) >>
-		__ffs(REG_ROUTE_LOCATION__MASK);
-}
-
-static int efm32_i2c_probe(struct platform_device *pdev)
-{
-	struct efm32_i2c_ddata *ddata;
-	struct resource *res;
-	unsigned long rate;
-	struct device_node *np = pdev->dev.of_node;
-	u32 location, frequency;
-	int ret;
-	u32 clkdiv;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-	platform_set_drvdata(pdev, ddata);
-
-	init_completion(&ddata->done);
-	strlcpy(ddata->adapter.name, pdev->name, sizeof(ddata->adapter.name));
-	ddata->adapter.owner = THIS_MODULE;
-	ddata->adapter.algo = &efm32_i2c_algo;
-	ddata->adapter.dev.parent = &pdev->dev;
-	ddata->adapter.dev.of_node = pdev->dev.of_node;
-	i2c_set_adapdata(&ddata->adapter, ddata);
-
-	ddata->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(ddata->clk)) {
-		ret = PTR_ERR(ddata->clk);
-		dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
-		return ret;
-	}
-
-	ddata->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
-	if (IS_ERR(ddata->base))
-		return PTR_ERR(ddata->base);
-
-	if (resource_size(res) < 0x42) {
-		dev_err(&pdev->dev, "memory resource too small\n");
-		return -EINVAL;
-	}
-
-	ret = platform_get_irq(pdev, 0);
-	if (ret <= 0) {
-		if (!ret)
-			ret = -EINVAL;
-		return ret;
-	}
-
-	ddata->irq = ret;
-
-	ret = clk_prepare_enable(ddata->clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
-		return ret;
-	}
-
-
-	ret = of_property_read_u32(np, "energymicro,location", &location);
-
-	if (ret)
-		/* fall back to wrongly namespaced property */
-		ret = of_property_read_u32(np, "efm32,location", &location);
-
-	if (!ret) {
-		dev_dbg(&pdev->dev, "using location %u\n", location);
-	} else {
-		/* default to location configured in hardware */
-		location = efm32_i2c_get_configured_location(ddata);
-
-		dev_info(&pdev->dev, "fall back to location %u\n", location);
-	}
-
-	ddata->location = location;
-
-	ret = of_property_read_u32(np, "clock-frequency", &frequency);
-	if (!ret) {
-		dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
-	} else {
-		frequency = I2C_MAX_STANDARD_MODE_FREQ;
-		dev_info(&pdev->dev, "defaulting to 100 kHz\n");
-	}
-	ddata->frequency = frequency;
-
-	rate = clk_get_rate(ddata->clk);
-	if (!rate) {
-		dev_err(&pdev->dev, "there is no input clock available\n");
-		ret = -EINVAL;
-		goto err_disable_clk;
-	}
-	clkdiv = DIV_ROUND_UP(rate, 8 * ddata->frequency) - 1;
-	if (clkdiv >= 0x200) {
-		dev_err(&pdev->dev,
-				"input clock too fast (%lu) to divide down to bus freq (%lu)",
-				rate, ddata->frequency);
-		ret = -EINVAL;
-		goto err_disable_clk;
-	}
-
-	dev_dbg(&pdev->dev, "input clock = %lu, bus freq = %lu, clkdiv = %lu\n",
-			rate, ddata->frequency, (unsigned long)clkdiv);
-	efm32_i2c_write32(ddata, REG_CLKDIV, REG_CLKDIV_DIV(clkdiv));
-
-	efm32_i2c_write32(ddata, REG_ROUTE, REG_ROUTE_SDAPEN |
-			REG_ROUTE_SCLPEN |
-			REG_ROUTE_LOCATION(ddata->location));
-
-	efm32_i2c_write32(ddata, REG_CTRL, REG_CTRL_EN |
-			REG_CTRL_BITO_160PCC | 0 * REG_CTRL_GIBITO);
-
-	efm32_i2c_write32(ddata, REG_IFC, REG_IFC__MASK);
-	efm32_i2c_write32(ddata, REG_IEN, REG_IF_TXC | REG_IF_ACK | REG_IF_NACK
-			| REG_IF_ARBLOST | REG_IF_BUSERR | REG_IF_RXDATAV);
-
-	/* to make bus idle */
-	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ABORT);
-
-	ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
-		goto err_disable_clk;
-	}
-
-	ret = i2c_add_adapter(&ddata->adapter);
-	if (ret) {
-		free_irq(ddata->irq, ddata);
-
-err_disable_clk:
-		clk_disable_unprepare(ddata->clk);
-	}
-	return ret;
-}
-
-static int efm32_i2c_remove(struct platform_device *pdev)
-{
-	struct efm32_i2c_ddata *ddata = platform_get_drvdata(pdev);
-
-	i2c_del_adapter(&ddata->adapter);
-	free_irq(ddata->irq, ddata);
-	clk_disable_unprepare(ddata->clk);
-
-	return 0;
-}
-
-static const struct of_device_id efm32_i2c_dt_ids[] = {
-	{
-		.compatible = "energymicro,efm32-i2c",
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(of, efm32_i2c_dt_ids);
-
-static struct platform_driver efm32_i2c_driver = {
-	.probe = efm32_i2c_probe,
-	.remove = efm32_i2c_remove,
-
-	.driver = {
-		.name = DRIVER_NAME,
-		.of_match_table = efm32_i2c_dt_ids,
-	},
-};
-module_platform_driver(efm32_i2c_driver);
-
-MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
-MODULE_DESCRIPTION("EFM32 i2c driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-- 
2.29.2


WARNING: multiple messages have this Message-ID
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	Wolfram Sang <wsa@kernel.org>
Cc: soc@kernel.org, kernel@pengutronix.de,
	linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org
Subject: [PATCH v2 5/7] i2c: Drop unused efm32 bus driver
Date: Fri, 15 Jan 2021 16:51:28 +0100	[thread overview]
Message-ID: <20210115155130.185010-6-u.kleine-koenig@pengutronix.de> (raw)
Message-ID: <20210115155128.DC2YBTbVHIqOg6TnJawUL4zqX0fa12xVvDCqAXA2WhA@z> (raw)
In-Reply-To: <20210115155130.185010-1-u.kleine-koenig@pengutronix.de>

Support for this machine was just removed, so drop the now unused i2c
bus driver, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/i2c/busses/Kconfig     |   7 -
 drivers/i2c/busses/Makefile    |   1 -
 drivers/i2c/busses/i2c-efm32.c | 469 ---------------------------------
 3 files changed, 477 deletions(-)
 delete mode 100644 drivers/i2c/busses/i2c-efm32.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d4d60ad0eda0..fd919f9339d6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -586,13 +586,6 @@ config I2C_DIGICOLOR
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-digicolor.
 
-config I2C_EFM32
-	tristate "EFM32 I2C controller"
-	depends on ARCH_EFM32 || COMPILE_TEST
-	help
-	  This driver supports the i2c block found in Energy Micro's EFM32
-	  SoCs.
-
 config I2C_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
 	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 683c49faca05..894ff95885b8 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -58,7 +58,6 @@ i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-bayt
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)			+= i2c-designware-pci.o
 i2c-designware-pci-y					:= i2c-designware-pcidrv.o
 obj-$(CONFIG_I2C_DIGICOLOR)	+= i2c-digicolor.o
-obj-$(CONFIG_I2C_EFM32)		+= i2c-efm32.o
 obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EMEV2)		+= i2c-emev2.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
deleted file mode 100644
index f6e13ceeb2b3..000000000000
--- a/drivers/i2c/busses/i2c-efm32.c
+++ /dev/null
@@ -1,469 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Uwe Kleine-Koenig for Pengutronix
- */
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#define DRIVER_NAME "efm32-i2c"
-
-#define MASK_VAL(mask, val)		((val << __ffs(mask)) & mask)
-
-#define REG_CTRL		0x00
-#define REG_CTRL_EN			0x00001
-#define REG_CTRL_SLAVE			0x00002
-#define REG_CTRL_AUTOACK		0x00004
-#define REG_CTRL_AUTOSE			0x00008
-#define REG_CTRL_AUTOSN			0x00010
-#define REG_CTRL_ARBDIS			0x00020
-#define REG_CTRL_GCAMEN			0x00040
-#define REG_CTRL_CLHR__MASK		0x00300
-#define REG_CTRL_BITO__MASK		0x03000
-#define REG_CTRL_BITO_OFF		0x00000
-#define REG_CTRL_BITO_40PCC		0x01000
-#define REG_CTRL_BITO_80PCC		0x02000
-#define REG_CTRL_BITO_160PCC		0x03000
-#define REG_CTRL_GIBITO			0x08000
-#define REG_CTRL_CLTO__MASK		0x70000
-#define REG_CTRL_CLTO_OFF		0x00000
-
-#define REG_CMD			0x04
-#define REG_CMD_START			0x00001
-#define REG_CMD_STOP			0x00002
-#define REG_CMD_ACK			0x00004
-#define REG_CMD_NACK			0x00008
-#define REG_CMD_CONT			0x00010
-#define REG_CMD_ABORT			0x00020
-#define REG_CMD_CLEARTX			0x00040
-#define REG_CMD_CLEARPC			0x00080
-
-#define REG_STATE		0x08
-#define REG_STATE_BUSY			0x00001
-#define REG_STATE_MASTER		0x00002
-#define REG_STATE_TRANSMITTER		0x00004
-#define REG_STATE_NACKED		0x00008
-#define REG_STATE_BUSHOLD		0x00010
-#define REG_STATE_STATE__MASK		0x000e0
-#define REG_STATE_STATE_IDLE		0x00000
-#define REG_STATE_STATE_WAIT		0x00020
-#define REG_STATE_STATE_START		0x00040
-#define REG_STATE_STATE_ADDR		0x00060
-#define REG_STATE_STATE_ADDRACK		0x00080
-#define REG_STATE_STATE_DATA		0x000a0
-#define REG_STATE_STATE_DATAACK		0x000c0
-
-#define REG_STATUS		0x0c
-#define REG_STATUS_PSTART		0x00001
-#define REG_STATUS_PSTOP		0x00002
-#define REG_STATUS_PACK			0x00004
-#define REG_STATUS_PNACK		0x00008
-#define REG_STATUS_PCONT		0x00010
-#define REG_STATUS_PABORT		0x00020
-#define REG_STATUS_TXC			0x00040
-#define REG_STATUS_TXBL			0x00080
-#define REG_STATUS_RXDATAV		0x00100
-
-#define REG_CLKDIV		0x10
-#define REG_CLKDIV_DIV__MASK		0x001ff
-#define REG_CLKDIV_DIV(div)		MASK_VAL(REG_CLKDIV_DIV__MASK, (div))
-
-#define REG_SADDR		0x14
-#define REG_SADDRMASK		0x18
-#define REG_RXDATA		0x1c
-#define REG_RXDATAP		0x20
-#define REG_TXDATA		0x24
-#define REG_IF			0x28
-#define REG_IF_START			0x00001
-#define REG_IF_RSTART			0x00002
-#define REG_IF_ADDR			0x00004
-#define REG_IF_TXC			0x00008
-#define REG_IF_TXBL			0x00010
-#define REG_IF_RXDATAV			0x00020
-#define REG_IF_ACK			0x00040
-#define REG_IF_NACK			0x00080
-#define REG_IF_MSTOP			0x00100
-#define REG_IF_ARBLOST			0x00200
-#define REG_IF_BUSERR			0x00400
-#define REG_IF_BUSHOLD			0x00800
-#define REG_IF_TXOF			0x01000
-#define REG_IF_RXUF			0x02000
-#define REG_IF_BITO			0x04000
-#define REG_IF_CLTO			0x08000
-#define REG_IF_SSTOP			0x10000
-
-#define REG_IFS			0x2c
-#define REG_IFC			0x30
-#define REG_IFC__MASK			0x1ffcf
-
-#define REG_IEN			0x34
-
-#define REG_ROUTE		0x38
-#define REG_ROUTE_SDAPEN		0x00001
-#define REG_ROUTE_SCLPEN		0x00002
-#define REG_ROUTE_LOCATION__MASK	0x00700
-#define REG_ROUTE_LOCATION(n)		MASK_VAL(REG_ROUTE_LOCATION__MASK, (n))
-
-struct efm32_i2c_ddata {
-	struct i2c_adapter adapter;
-
-	struct clk *clk;
-	void __iomem *base;
-	unsigned int irq;
-	u8 location;
-	unsigned long frequency;
-
-	/* transfer data */
-	struct completion done;
-	struct i2c_msg *msgs;
-	size_t num_msgs;
-	size_t current_word, current_msg;
-	int retval;
-};
-
-static u32 efm32_i2c_read32(struct efm32_i2c_ddata *ddata, unsigned offset)
-{
-	return readl(ddata->base + offset);
-}
-
-static void efm32_i2c_write32(struct efm32_i2c_ddata *ddata,
-		unsigned offset, u32 value)
-{
-	writel(value, ddata->base + offset);
-}
-
-static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
-{
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-
-	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
-	efm32_i2c_write32(ddata, REG_TXDATA, i2c_8bit_addr_from_msg(cur_msg));
-}
-
-static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
-{
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-
-	if (ddata->current_word >= cur_msg->len) {
-		/* cur_msg completely transferred */
-		ddata->current_word = 0;
-		ddata->current_msg += 1;
-
-		if (ddata->current_msg >= ddata->num_msgs) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			complete(&ddata->done);
-		} else {
-			efm32_i2c_send_next_msg(ddata);
-		}
-	} else {
-		efm32_i2c_write32(ddata, REG_TXDATA,
-				cur_msg->buf[ddata->current_word++]);
-	}
-}
-
-static void efm32_i2c_recv_next_byte(struct efm32_i2c_ddata *ddata)
-{
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-
-	cur_msg->buf[ddata->current_word] = efm32_i2c_read32(ddata, REG_RXDATA);
-	ddata->current_word += 1;
-	if (ddata->current_word >= cur_msg->len) {
-		/* cur_msg completely transferred */
-		ddata->current_word = 0;
-		ddata->current_msg += 1;
-
-		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_NACK);
-
-		if (ddata->current_msg >= ddata->num_msgs) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			complete(&ddata->done);
-		} else {
-			efm32_i2c_send_next_msg(ddata);
-		}
-	} else {
-		efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ACK);
-	}
-}
-
-static irqreturn_t efm32_i2c_irq(int irq, void *dev_id)
-{
-	struct efm32_i2c_ddata *ddata = dev_id;
-	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
-	u32 irqflag = efm32_i2c_read32(ddata, REG_IF);
-	u32 state = efm32_i2c_read32(ddata, REG_STATE);
-
-	efm32_i2c_write32(ddata, REG_IFC, irqflag & REG_IFC__MASK);
-
-	switch (state & REG_STATE_STATE__MASK) {
-	case REG_STATE_STATE_IDLE:
-		/* arbitration lost? */
-		ddata->retval = -EAGAIN;
-		complete(&ddata->done);
-		break;
-	case REG_STATE_STATE_WAIT:
-		/*
-		 * huh, this shouldn't happen.
-		 * Reset hardware state and get out
-		 */
-		ddata->retval = -EIO;
-		efm32_i2c_write32(ddata, REG_CMD,
-				REG_CMD_STOP | REG_CMD_ABORT |
-				REG_CMD_CLEARTX | REG_CMD_CLEARPC);
-		complete(&ddata->done);
-		break;
-	case REG_STATE_STATE_START:
-		/* "caller" is expected to send an address */
-		break;
-	case REG_STATE_STATE_ADDR:
-		/* wait for Ack or NAck of slave */
-		break;
-	case REG_STATE_STATE_ADDRACK:
-		if (state & REG_STATE_NACKED) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			ddata->retval = -ENXIO;
-			complete(&ddata->done);
-		} else if (cur_msg->flags & I2C_M_RD) {
-			/* wait for slave to send first data byte */
-		} else {
-			efm32_i2c_send_next_byte(ddata);
-		}
-		break;
-	case REG_STATE_STATE_DATA:
-		if (cur_msg->flags & I2C_M_RD) {
-			efm32_i2c_recv_next_byte(ddata);
-		} else {
-			/* wait for Ack or Nack of slave */
-		}
-		break;
-	case REG_STATE_STATE_DATAACK:
-		if (state & REG_STATE_NACKED) {
-			efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
-			complete(&ddata->done);
-		} else {
-			efm32_i2c_send_next_byte(ddata);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int efm32_i2c_master_xfer(struct i2c_adapter *adap,
-		struct i2c_msg *msgs, int num)
-{
-	struct efm32_i2c_ddata *ddata = i2c_get_adapdata(adap);
-	int ret;
-
-	if (ddata->msgs)
-		return -EBUSY;
-
-	ddata->msgs = msgs;
-	ddata->num_msgs = num;
-	ddata->current_word = 0;
-	ddata->current_msg = 0;
-	ddata->retval = -EIO;
-
-	reinit_completion(&ddata->done);
-
-	dev_dbg(&ddata->adapter.dev, "state: %08x, status: %08x\n",
-			efm32_i2c_read32(ddata, REG_STATE),
-			efm32_i2c_read32(ddata, REG_STATUS));
-
-	efm32_i2c_send_next_msg(ddata);
-
-	wait_for_completion(&ddata->done);
-
-	if (ddata->current_msg >= ddata->num_msgs)
-		ret = ddata->num_msgs;
-	else
-		ret = ddata->retval;
-
-	return ret;
-}
-
-static u32 efm32_i2c_functionality(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm efm32_i2c_algo = {
-	.master_xfer = efm32_i2c_master_xfer,
-	.functionality = efm32_i2c_functionality,
-};
-
-static u32 efm32_i2c_get_configured_location(struct efm32_i2c_ddata *ddata)
-{
-	u32 reg = efm32_i2c_read32(ddata, REG_ROUTE);
-
-	return (reg & REG_ROUTE_LOCATION__MASK) >>
-		__ffs(REG_ROUTE_LOCATION__MASK);
-}
-
-static int efm32_i2c_probe(struct platform_device *pdev)
-{
-	struct efm32_i2c_ddata *ddata;
-	struct resource *res;
-	unsigned long rate;
-	struct device_node *np = pdev->dev.of_node;
-	u32 location, frequency;
-	int ret;
-	u32 clkdiv;
-
-	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-	platform_set_drvdata(pdev, ddata);
-
-	init_completion(&ddata->done);
-	strlcpy(ddata->adapter.name, pdev->name, sizeof(ddata->adapter.name));
-	ddata->adapter.owner = THIS_MODULE;
-	ddata->adapter.algo = &efm32_i2c_algo;
-	ddata->adapter.dev.parent = &pdev->dev;
-	ddata->adapter.dev.of_node = pdev->dev.of_node;
-	i2c_set_adapdata(&ddata->adapter, ddata);
-
-	ddata->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(ddata->clk)) {
-		ret = PTR_ERR(ddata->clk);
-		dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
-		return ret;
-	}
-
-	ddata->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
-	if (IS_ERR(ddata->base))
-		return PTR_ERR(ddata->base);
-
-	if (resource_size(res) < 0x42) {
-		dev_err(&pdev->dev, "memory resource too small\n");
-		return -EINVAL;
-	}
-
-	ret = platform_get_irq(pdev, 0);
-	if (ret <= 0) {
-		if (!ret)
-			ret = -EINVAL;
-		return ret;
-	}
-
-	ddata->irq = ret;
-
-	ret = clk_prepare_enable(ddata->clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
-		return ret;
-	}
-
-
-	ret = of_property_read_u32(np, "energymicro,location", &location);
-
-	if (ret)
-		/* fall back to wrongly namespaced property */
-		ret = of_property_read_u32(np, "efm32,location", &location);
-
-	if (!ret) {
-		dev_dbg(&pdev->dev, "using location %u\n", location);
-	} else {
-		/* default to location configured in hardware */
-		location = efm32_i2c_get_configured_location(ddata);
-
-		dev_info(&pdev->dev, "fall back to location %u\n", location);
-	}
-
-	ddata->location = location;
-
-	ret = of_property_read_u32(np, "clock-frequency", &frequency);
-	if (!ret) {
-		dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
-	} else {
-		frequency = I2C_MAX_STANDARD_MODE_FREQ;
-		dev_info(&pdev->dev, "defaulting to 100 kHz\n");
-	}
-	ddata->frequency = frequency;
-
-	rate = clk_get_rate(ddata->clk);
-	if (!rate) {
-		dev_err(&pdev->dev, "there is no input clock available\n");
-		ret = -EINVAL;
-		goto err_disable_clk;
-	}
-	clkdiv = DIV_ROUND_UP(rate, 8 * ddata->frequency) - 1;
-	if (clkdiv >= 0x200) {
-		dev_err(&pdev->dev,
-				"input clock too fast (%lu) to divide down to bus freq (%lu)",
-				rate, ddata->frequency);
-		ret = -EINVAL;
-		goto err_disable_clk;
-	}
-
-	dev_dbg(&pdev->dev, "input clock = %lu, bus freq = %lu, clkdiv = %lu\n",
-			rate, ddata->frequency, (unsigned long)clkdiv);
-	efm32_i2c_write32(ddata, REG_CLKDIV, REG_CLKDIV_DIV(clkdiv));
-
-	efm32_i2c_write32(ddata, REG_ROUTE, REG_ROUTE_SDAPEN |
-			REG_ROUTE_SCLPEN |
-			REG_ROUTE_LOCATION(ddata->location));
-
-	efm32_i2c_write32(ddata, REG_CTRL, REG_CTRL_EN |
-			REG_CTRL_BITO_160PCC | 0 * REG_CTRL_GIBITO);
-
-	efm32_i2c_write32(ddata, REG_IFC, REG_IFC__MASK);
-	efm32_i2c_write32(ddata, REG_IEN, REG_IF_TXC | REG_IF_ACK | REG_IF_NACK
-			| REG_IF_ARBLOST | REG_IF_BUSERR | REG_IF_RXDATAV);
-
-	/* to make bus idle */
-	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ABORT);
-
-	ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
-		goto err_disable_clk;
-	}
-
-	ret = i2c_add_adapter(&ddata->adapter);
-	if (ret) {
-		free_irq(ddata->irq, ddata);
-
-err_disable_clk:
-		clk_disable_unprepare(ddata->clk);
-	}
-	return ret;
-}
-
-static int efm32_i2c_remove(struct platform_device *pdev)
-{
-	struct efm32_i2c_ddata *ddata = platform_get_drvdata(pdev);
-
-	i2c_del_adapter(&ddata->adapter);
-	free_irq(ddata->irq, ddata);
-	clk_disable_unprepare(ddata->clk);
-
-	return 0;
-}
-
-static const struct of_device_id efm32_i2c_dt_ids[] = {
-	{
-		.compatible = "energymicro,efm32-i2c",
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(of, efm32_i2c_dt_ids);
-
-static struct platform_driver efm32_i2c_driver = {
-	.probe = efm32_i2c_probe,
-	.remove = efm32_i2c_remove,
-
-	.driver = {
-		.name = DRIVER_NAME,
-		.of_match_table = efm32_i2c_dt_ids,
-	},
-};
-module_platform_driver(efm32_i2c_driver);
-
-MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
-MODULE_DESCRIPTION("EFM32 i2c driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-01-15 15:51 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-15 15:51 [PATCH v2 0/7] Remove ARM platform efm32 Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 1/7] ARM: drop efm32 platform Uwe Kleine-König
2021-01-15 15:51   ` Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 2/7] clk: Drop unused efm32gg driver Uwe Kleine-König
2021-01-15 15:51   ` Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 3/7] clocksource: Drop unused efm32 timer code Uwe Kleine-König
2021-01-15 15:51   ` Uwe Kleine-König
2021-01-18 15:18   ` Daniel Lezcano
2021-01-18 15:18     ` Daniel Lezcano
2021-01-18 15:20     ` Arnd Bergmann
2021-01-18 15:20       ` Arnd Bergmann
2021-01-18 18:09   ` Daniel Lezcano
2021-01-18 18:09     ` Daniel Lezcano
2021-02-10 10:06   ` [tip: timers/core] clocksource/drivers/efm32: Drop unused " tip-bot2 for Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 4/7] spi: Drop unused efm32 bus driver Uwe Kleine-König
2021-01-15 15:51   ` Uwe Kleine-König
2021-01-15 15:51 ` Uwe Kleine-König [this message]
2021-01-15 15:51   ` [PATCH v2 5/7] i2c: " Uwe Kleine-König
2021-01-17 11:09   ` Wolfram Sang
2021-01-17 11:09     ` Wolfram Sang
2021-01-15 15:51 ` [PATCH v2 6/7] tty: serial: Drop unused efm32 serial driver Uwe Kleine-König
2021-01-15 15:51   ` Uwe Kleine-König
2021-01-15 15:51 ` [PATCH v2 7/7] MAINTAINERS: Remove deleted platform efm32 Uwe Kleine-König
2021-01-15 15:51   ` Uwe Kleine-König
2021-01-15 16:44 ` [PATCH v2 0/7] Remove ARM " Arnd Bergmann
2021-01-15 16:44   ` Arnd Bergmann
2021-01-15 16:48   ` Wolfram Sang
2021-01-15 16:48     ` Wolfram Sang
2021-01-16  8:02   ` Greg Kroah-Hartman
2021-01-16  8:02     ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210115155130.185010-6-u.kleine-koenig@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=arnd@arndb.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=soc@kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.