All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
	broonie@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	alistair23@gmail.com, Alistair Francis <alistair@alistair23.me>
Subject: [PATCH 6/6] arch/arm: reMarkable2: Enable lcdif
Date: Sat, 16 Jan 2021 20:25:39 -0800	[thread overview]
Message-ID: <20210117042539.1609-6-alistair@alistair23.me> (raw)
In-Reply-To: <20210117042539.1609-1-alistair@alistair23.me>

Connect the dispaly on the reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 70 +++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index f419ab704f06..d4e93f7ca7ea 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -221,6 +221,42 @@ reg_epdpmic: vcom {
 	};
 };
 
+&lcdif {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-1 = <&pinctrl_lcdif>;
+	lcd-supply = <&reg_epdpmic>;
+	lcd2-supply = <&reg_sdoe>;
+	display = <&display0>;
+	prevent-frying-pan;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <24>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: timing0 {
+				clock-frequency = <40000000>;
+				hactive = <334>;
+				vactive = <1405>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vback-porch = <1>;
+				vfront-porch = <1>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
 &sdma {
 	status = "okay";
 };
@@ -331,6 +367,40 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
 		>;
 	};
 
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.29.2


  parent reply	other threads:[~2021-01-17 23:46 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-17  4:25 [PATCH 1/6] devicetree/bindings: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-01-17  4:25 ` [PATCH 2/6] mfd: Initial commit of sy7636a Alistair Francis
2021-02-04 10:31   ` Lee Jones
2021-03-21  2:18     ` Alistair Francis
2021-03-23  9:35       ` Lee Jones
2021-03-25 13:49         ` Alistair Francis
2021-01-17  4:25 ` [PATCH 3/6] devicetree/bindings: Initial commit of silergy,sy7636a-regulator.yaml Alistair Francis
2021-01-18 12:35   ` Mark Brown
2021-01-18 12:42     ` Mark Brown
2021-01-22  5:05       ` Alistair Francis
2021-01-18 15:47   ` Rob Herring
2021-01-17  4:25 ` [PATCH 4/6] regulator: Initial commit of sy7636a Alistair Francis
2021-01-18 12:31   ` Mark Brown
2021-01-22  6:24     ` Alistair Francis
2021-01-22 13:37       ` Mark Brown
2021-01-23  8:34         ` Alistair Francis
2021-01-17  4:25 ` [PATCH 5/6] arch/arm: reMarkable2: Enable silergy,sy7636a Alistair Francis
2021-01-17  4:25 ` Alistair Francis [this message]
2021-01-18 15:47 ` [PATCH 1/6] devicetree/bindings: Initial commit of silergy,sy7636a.yaml Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210117042539.1609-6-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.