* [PATCH -next] hid: clean up Kconfig
@ 2021-01-17 21:20 Randy Dunlap
0 siblings, 0 replies; only message in thread
From: Randy Dunlap @ 2021-01-17 21:20 UTC (permalink / raw)
To: linux-kernel; +Cc: Randy Dunlap, Jiri Kosina, Benjamin Tissoires, linux-input
This is a large cleanup of drivers/hid/Kconfig:
* Use tab instead of spaces for main menu "depends on INPUT".
* Indent help text by 2 spaces (total of one tab + 2 spaces).
* Convert 2 intra-line tabs to spaces.
* Convert multiple spaces to one space in help text.
* Reflow a few help text lines if they are too long (for a 80-character
terminal).
* Capitalize beginning of a phrase (for consistency).
* Capitalize 2 product names.
* Drop one trailing space.
* End 2 sentences with a period ('.').
* Fix grammar: is -> are
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
---
drivers/hid/Kconfig | 498 +++++++++++++++++++++---------------------
1 file changed, 251 insertions(+), 247 deletions(-)
--- linux-next-20210115.orig/drivers/hid/Kconfig
+++ linux-next-20210115/drivers/hid/Kconfig
@@ -3,7 +3,7 @@
# HID driver configuration
#
menu "HID support"
- depends on INPUT
+ depends on INPUT
config HID
tristate "HID bus support"
@@ -32,62 +32,62 @@ config HID_BATTERY_STRENGTH
select POWER_SUPPLY
default n
help
- This option adds support of reporting battery strength (for HID devices
- that support this feature) through power_supply class so that userspace
- tools, such as upower, can display it.
+ This option adds support of reporting battery strength (for HID devices
+ that support this feature) through power_supply class so that userspace
+ tools, such as upower, can display it.
config HIDRAW
bool "/dev/hidraw raw HID device support"
depends on HID
help
- Say Y here if you want to support HID devices (from the USB
- specification standpoint) that aren't strictly user interface
- devices, like monitor controls and Uninterruptible Power Supplies.
-
- This module supports these devices separately using a separate
- event interface on /dev/hidraw.
-
- There is also a /dev/hiddev configuration option in the USB HID
- configuration menu. In comparison to hiddev, this device does not process
- the hid events at all (no parsing, no lookups). This lets applications
- to work on raw hid events when they want to, and avoid using transport-specific
- userspace libhid/libusb libraries.
+ Say Y here if you want to support HID devices (from the USB
+ specification standpoint) that aren't strictly user interface
+ devices, like monitor controls and Uninterruptible Power Supplies.
+
+ This module supports these devices separately using a separate
+ event interface on /dev/hidraw.
+
+ There is also a /dev/hiddev configuration option in the USB HID
+ configuration menu. In comparison to hiddev, this device does not process
+ the hid events at all (no parsing, no lookups). This lets applications
+ to work on raw hid events when they want to, and avoid using
+ transport-specific userspace libhid/libusb libraries.
- If unsure, say Y.
+ If unsure, say Y.
config UHID
tristate "User-space I/O driver support for HID subsystem"
depends on HID
default n
help
- Say Y here if you want to provide HID I/O Drivers from user-space.
- This allows to write I/O drivers in user-space and feed the data from
- the device into the kernel. The kernel parses the HID reports, loads the
- corresponding HID Device Driver or provides input devices on top of your
- user-space device.
-
- This driver cannot be used to parse HID-reports in user-space and write
- special HID-drivers. You should use hidraw for that.
- Instead, this driver allows to write the transport-layer driver in
- user-space like USB-HID and Bluetooth-HID do in kernel-space.
+ Say Y here if you want to provide HID I/O Drivers from user-space.
+ This allows to write I/O drivers in user-space and feed the data from
+ the device into the kernel. The kernel parses the HID reports, loads the
+ corresponding HID Device Driver or provides input devices on top of your
+ user-space device.
+
+ This driver cannot be used to parse HID-reports in user-space and write
+ special HID-drivers. You should use hidraw for that.
+ Instead, this driver allows to write the transport-layer driver in
+ user-space like USB-HID and Bluetooth-HID do in kernel-space.
- If unsure, say N.
+ If unsure, say N.
- To compile this driver as a module, choose M here: the
- module will be called uhid.
+ To compile this driver as a module, choose M here: the
+ module will be called uhid.
config HID_GENERIC
tristate "Generic HID driver"
depends on HID
default HID
help
- Support for generic devices on the HID bus. This includes most
- keyboards and mice, joysticks, tablets and digitizers.
+ Support for generic devices on the HID bus. This includes most
+ keyboards and mice, joysticks, tablets and digitizers.
- To compile this driver as a module, choose M here: the module
- will be called hid-generic.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-generic.
- If unsure, say Y.
+ If unsure, say Y.
menu "Special HID drivers"
depends on HID
@@ -97,7 +97,7 @@ config HID_A4TECH
depends on HID
default !EXPERT
help
- Support for A4 tech X5 and WOP-35 / Trust 450L mice.
+ Support for A4 tech X5 and WOP-35 / Trust 450L mice.
config HID_ACCUTOUCH
tristate "Accutouch touch device"
@@ -107,7 +107,7 @@ config HID_ACCUTOUCH
The driver works around a problem in the reported device capabilities
which causes userspace to detect the device as a mouse rather than
- a touchscreen.
+ a touchscreen.
Say Y here if you have a Accutouch 2216 touch controller.
@@ -115,37 +115,37 @@ config HID_ACRUX
tristate "ACRUX game controller support"
depends on HID
help
- Say Y here if you want to enable support for ACRUX game controllers.
+ Say Y here if you want to enable support for ACRUX game controllers.
config HID_ACRUX_FF
bool "ACRUX force feedback support"
depends on HID_ACRUX
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for ACRUX
- game controllers.
+ Say Y here if you want to enable force feedback support for ACRUX
+ game controllers.
config HID_APPLE
tristate "Apple {i,Power,Mac}Books"
depends on HID
default !EXPERT
help
- Support for some Apple devices which less or more break
- HID specification.
+ Support for some Apple devices which less or more break
+ HID specification.
- Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
- MacBooks, MacBook Pros and Apple Aluminum.
+ Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
+ MacBooks, MacBook Pros and Apple Aluminum.
config HID_APPLEIR
tristate "Apple infrared receiver"
depends on (USB_HID)
help
- Support for Apple infrared remote control. All the Apple computers from
+ Support for Apple infrared remote control. All the Apple computers from
2005 onwards include such a port, except the unibody Macbook (2009),
and Mac Pros. This receiver is also used in the Apple TV set-top box
prior to the 2010 model.
- Say Y here if you want support for Apple infrared remote control.
+ Say Y here if you want support for Apple infrared remote control.
config HID_ASUS
tristate "Asus"
@@ -154,37 +154,38 @@ config HID_ASUS
depends on ASUS_WMI || ASUS_WMI=n
select POWER_SUPPLY
help
- Support for Asus notebook built-in keyboard and touchpad via i2c, and
- the Asus Republic of Gamers laptop keyboard special keys.
+ Support for Asus notebook built-in keyboard and touchpad via i2c, and
+ the Asus Republic of Gamers laptop keyboard special keys.
- Supported devices:
- - EeeBook X205TA
- - VivoBook E200HA
- - GL553V series
- - GL753V series
+ Supported devices:
+ - EeeBook X205TA
+ - VivoBook E200HA
+ - GL553V series
+ - GL753V series
config HID_AUREAL
tristate "Aureal"
depends on HID
help
- Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
+ Support for Aureal Cy se W-01RN Remote Controller and other Aureal
+ derived remotes.
config HID_BELKIN
tristate "Belkin Flip KVM and Wireless keyboard"
depends on HID
default !EXPERT
help
- Support for Belkin Flip KVM and Wireless keyboard.
+ Support for Belkin Flip KVM and Wireless keyboard.
config HID_BETOP_FF
tristate "Betop Production Inc. force feedback support"
depends on USB_HID
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for devices by
- BETOP Production Ltd.
- Currently the following devices are known to be supported:
- - BETOP 2185 PC & BFM MODE
+ Say Y here if you want to enable force feedback support for devices by
+ BETOP Production Ltd.
+ Currently the following devices are known to be supported:
+ - BETOP 2185 PC & BFM MODE
config HID_BIGBEN_FF
tristate "BigBen Interactive Kids' gamepad support"
@@ -203,54 +204,54 @@ config HID_CHERRY
depends on HID
default !EXPERT
help
- Support for Cherry Cymotion keyboard.
+ Support for Cherry Cymotion keyboard.
config HID_CHICONY
tristate "Chicony devices"
depends on HID
default !EXPERT
help
- Support for Chicony Tactical pad and special keys on Chicony keyboards.
+ Support for Chicony Tactical pad and special keys on Chicony keyboards.
config HID_CORSAIR
tristate "Corsair devices"
depends on HID && USB && LEDS_CLASS
help
- Support for Corsair devices that are not fully compliant with the
- HID standard.
+ Support for Corsair devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - Vengeance K90
- - Scimitar PRO RGB
+ Supported devices:
+ - Vengeance K90
+ - Scimitar PRO RGB
config HID_COUGAR
tristate "Cougar devices"
depends on HID
help
- Support for Cougar devices that are not fully compliant with the
- HID standard.
+ Support for Cougar devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - Cougar 500k Gaming Keyboard
+ Supported devices:
+ - Cougar 500k Gaming Keyboard
config HID_MACALLY
tristate "Macally devices"
depends on HID
help
- Support for Macally devices that are not fully compliant with the
- HID standard.
+ Support for Macally devices that are not fully compliant with the
+ HID standard.
- supported devices:
- - Macally ikey keyboard
+ Supported devices:
+ - Macally ikey keyboard
config HID_PRODIKEYS
tristate "Prodikeys PC-MIDI Keyboard support"
depends on HID && SND
select SND_RAWMIDI
help
- Support for Prodikeys PC-MIDI Keyboard device support.
- Say Y here to enable support for this device.
- - Prodikeys PC-MIDI keyboard.
+ Support for Prodikeys PC-MIDI Keyboard device support.
+ Say Y here to enable support for this device.
+ - Prodikeys PC-MIDI keyboard.
The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI
input and one MIDI output. These MIDI jacks appear as
a sound "card" in the ALSA sound system.
@@ -262,76 +263,76 @@ config HID_CMEDIA
tristate "CMedia CM6533 HID audio jack controls"
depends on HID
help
- Support for CMedia CM6533 HID audio jack controls.
+ Support for CMedia CM6533 HID audio jack controls.
config HID_CP2112
tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
depends on USB_HID && HIDRAW && I2C && GPIOLIB
select GPIOLIB_IRQCHIP
help
- Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
- This is a HID device driver which registers as an i2c adapter
- and gpiochip to expose these functions of the CP2112. The
- customizable USB descriptor fields are exposed as sysfs attributes.
+ Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
+ This is a HID device driver which registers as an i2c adapter
+ and gpiochip to expose these functions of the CP2112. The
+ customizable USB descriptor fields are exposed as sysfs attributes.
config HID_CREATIVE_SB0540
tristate "Creative SB0540 infrared receiver"
depends on USB_HID
help
- Support for Creative infrared SB0540-compatible remote controls, such
- as the RM-1500 and RM-1800 remotes.
+ Support for Creative infrared SB0540-compatible remote controls, such
+ as the RM-1500 and RM-1800 remotes.
- Say Y here if you want support for Creative SB0540 infrared receiver.
+ Say Y here if you want support for Creative SB0540 infrared receiver.
config HID_CYPRESS
tristate "Cypress mouse and barcode readers"
depends on HID
default !EXPERT
help
- Support for cypress mouse and barcode readers.
+ Support for Cypress mouse and barcode readers.
config HID_DRAGONRISE
tristate "DragonRise Inc. game controller"
depends on HID
help
- Say Y here if you have DragonRise Inc. game controllers.
- These might be branded as:
- - Tesun USB-703
- - Media-tech MT1504 "Rogue"
- - DVTech JS19 "Gear"
- - Defender Game Master
+ Say Y here if you have DragonRise Inc. game controllers.
+ These might be branded as:
+ - Tesun USB-703
+ - Media-tech MT1504 "Rogue"
+ - DVTech JS19 "Gear"
+ - Defender Game Master
config DRAGONRISE_FF
bool "DragonRise Inc. force feedback"
depends on HID_DRAGONRISE
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for DragonRise Inc.
- game controllers.
+ Say Y here if you want to enable force feedback support for DragonRise
+ Inc. game controllers.
config HID_EMS_FF
tristate "EMS Production Inc. force feedback support"
depends on HID
select INPUT_FF_MEMLESS
help
- Say Y here if you want to enable force feedback support for devices by
- EMS Production Ltd.
- Currently the following devices are known to be supported:
- - Trio Linker Plus II
+ Say Y here if you want to enable force feedback support for devices by
+ EMS Production Ltd.
+ Currently the following devices are known to be supported:
+ - Trio Linker Plus II
config HID_ELAN
tristate "ELAN USB Touchpad Support"
depends on LEDS_CLASS && USB_HID
help
- Say Y to enable support for the USB ELAN touchpad
- Currently the following devices are known to be supported:
- - HP Pavilion X2 10-p0XX.
+ Say Y to enable support for the USB ELAN touchpad.
+ Currently the following devices are known to be supported:
+ - HP Pavilion X2 10-p0XX.
config HID_ELECOM
tristate "ELECOM HID devices"
depends on HID
help
- Support for ELECOM devices:
+ Support for ELECOM devices:
- BM084 Bluetooth Mouse
- EX-G Trackballs (M-XT3DRBK, M-XT3URBK)
- DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK)
@@ -341,27 +342,27 @@ config HID_ELO
tristate "ELO USB 4000/4500 touchscreen"
depends on USB_HID
help
- Support for the ELO USB 4000/4500 touchscreens. Note that this is for
- different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+ Support for the ELO USB 4000/4500 touchscreens. Note that this is for
+ different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard"
depends on HID
default !EXPERT
help
- Support for Ezkey BTC 8193 keyboard.
+ Support for Ezkey BTC 8193 keyboard.
config HID_GEMBIRD
tristate "Gembird Joypad"
depends on HID
help
- Support for Gembird JPD-DualForce 2.
+ Support for Gembird JPD-DualForce 2.
config HID_GFRM
tristate "Google Fiber TV Box remote control support"
depends on HID
help
- Support for Google Fiber TV Box remote controls
+ Support for Google Fiber TV Box remote controls
config HID_GLORIOUS
tristate "Glorious PC Gaming Race mice"
@@ -374,7 +375,7 @@ config HID_HOLTEK
tristate "Holtek HID devices"
depends on USB_HID
help
- Support for Holtek based devices:
+ Support for Holtek based devices:
- Holtek On Line Grip based game controller
- Trust GXT 18 Gaming Keyboard
- Sharkoon Drakonia / Perixx MX-2000 gaming mice
@@ -395,7 +396,7 @@ config HID_GOOGLE_HAMMER
tristate "Google Hammer Keyboard"
depends on USB_HID && LEDS_CLASS && CROS_EC
help
- Say Y here if you have a Google Hammer device.
+ Say Y here if you have a Google Hammer device.
config HID_VIVALDI
tristate "Vivaldi Keyboard"
@@ -410,45 +411,45 @@ config HID_GT683R
tristate "MSI GT68xR LED support"
depends on LEDS_CLASS && USB_HID
help
- Say Y here if you want to enable support for the three MSI GT68xR LEDs
+ Say Y here if you want to enable support for the three MSI GT68xR LEDs
- This driver support following modes:
+ This driver support following modes:
- Normal: LEDs are fully on when enabled
- Audio: LEDs brightness depends on sound level
- Breathing: LEDs brightness varies at human breathing rate
- Currently the following devices are know to be supported:
+ Currently the following devices are know to be supported:
- MSI GT683R
config HID_KEYTOUCH
tristate "Keytouch HID devices"
depends on HID
help
- Support for Keytouch HID devices not fully compliant with
- the specification. Currently supported:
+ Support for Keytouch HID devices not fully compliant with
+ the specification. Currently supported:
- Keytouch IEC 60945
config HID_KYE
tristate "KYE/Genius devices"
depends on HID
help
- Support for KYE/Genius devices not fully compliant with HID standard:
- - Ergo Mouse
- - EasyPen i405X tablet
- - MousePen i608X tablet
- - EasyPen M610X tablet
+ Support for KYE/Genius devices not fully compliant with HID standard:
+ - Ergo Mouse
+ - EasyPen i405X tablet
+ - MousePen i608X tablet
+ - EasyPen M610X tablet
config HID_UCLOGIC
tristate "UC-Logic"
depends on USB_HID
help
- Support for UC-Logic and Huion tablets.
+ Support for UC-Logic and Huion tablets.
config HID_WALTOP
tristate "Waltop"
depends on HID
help
- Support for Waltop tablets.
+ Support for Waltop tablets.
config HID_VIEWSONIC
tristate "ViewSonic/Signotec"
@@ -460,68 +461,68 @@ config HID_GYRATION
tristate "Gyration remote control"
depends on HID
help
- Support for Gyration remote control.
+ Support for Gyration remote control.
config HID_ICADE
tristate "ION iCade arcade controller"
depends on HID
help
- Support for the ION iCade arcade controller to work as a joystick.
+ Support for the ION iCade arcade controller to work as a joystick.
- To compile this driver as a module, choose M here: the
- module will be called hid-icade.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-icade.
config HID_ITE
tristate "ITE devices"
depends on HID
default !EXPERT
help
- Support for ITE devices not fully compliant with HID standard.
+ Support for ITE devices not fully compliant with HID standard.
config HID_JABRA
tristate "Jabra USB HID Driver"
depends on HID
help
- Support for Jabra USB HID devices.
+ Support for Jabra USB HID devices.
- Prevents mapping of vendor defined HID usages to input events. Without
- this driver HID reports from Jabra devices may incorrectly be seen as
- mouse button events.
- Say M here if you may ever plug in a Jabra USB device.
+ Prevents mapping of vendor defined HID usages to input events. Without
+ this driver HID reports from Jabra devices may incorrectly be seen as
+ mouse button events.
+ Say M here if you may ever plug in a Jabra USB device.
config HID_TWINHAN
tristate "Twinhan IR remote control"
depends on HID
help
- Support for Twinhan IR remote control.
+ Support for Twinhan IR remote control.
config HID_KENSINGTON
tristate "Kensington Slimblade Trackball"
depends on HID
default !EXPERT
help
- Support for Kensington Slimblade Trackball.
+ Support for Kensington Slimblade Trackball.
config HID_LCPOWER
tristate "LC-Power"
depends on HID
help
- Support for LC-Power RC1000MCE RF remote control.
+ Support for LC-Power RC1000MCE RF remote control.
config HID_LED
tristate "Simple RGB LED support"
depends on HID
depends on LEDS_CLASS
help
- Support for simple RGB LED devices. Currently supported are:
- - Riso Kagaku Webmail Notifier
- - Dream Cheeky Webmail Notifier and Friends Alert
- - ThingM blink(1)
- - Delcom Visual Signal Indicator Generation 2
- - Greynut Luxafor
+ Support for simple RGB LED devices. Currently supported are:
+ - Riso Kagaku Webmail Notifier
+ - Dream Cheeky Webmail Notifier and Friends Alert
+ - ThingM blink(1)
+ - Delcom Visual Signal Indicator Generation 2
+ - Greynut Luxafor
- To compile this driver as a module, choose M here: the
- module will be called hid-led.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-led.
config HID_LENOVO
tristate "Lenovo / Thinkpad devices"
@@ -529,15 +530,16 @@ config HID_LENOVO
select NEW_LEDS
select LEDS_CLASS
help
- Support for IBM/Lenovo devices that are not fully compliant with HID standard.
+ Support for IBM/Lenovo devices that are not fully compliant with HID
+ standard.
- Say Y if you want support for horizontal scrolling of the IBM/Lenovo
- Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
- standalone keyboards, e.g:
- - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
- configuration)
- - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
- - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
+ Say Y if you want support for horizontal scrolling of the IBM/Lenovo
+ Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad
+ standalone keyboards, e.g.:
+ - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint
+ configuration)
+ - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys)
+ - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
config HID_LOGITECH
tristate "Logitech devices"
@@ -545,7 +547,8 @@ config HID_LOGITECH
depends on LEDS_CLASS
default !EXPERT
help
- Support for Logitech devices that are not fully compliant with HID standard.
+ Support for Logitech devices that are not fully compliant with HID
+ standard.
config HID_LOGITECH_DJ
tristate "Logitech receivers full support"
@@ -554,23 +557,23 @@ config HID_LOGITECH_DJ
depends on HID_LOGITECH
select HID_LOGITECH_HIDPP
help
- Say Y if you want support for Logitech receivers and devices.
- Logitech receivers are capable of pairing multiple Logitech compliant
- devices to the same receiver. Without this driver it will be handled by
- generic USB_HID driver and all incoming events will be multiplexed
- into a single mouse and a single keyboard device.
+ Say Y if you want support for Logitech receivers and devices.
+ Logitech receivers are capable of pairing multiple Logitech compliant
+ devices to the same receiver. Without this driver it will be handled by
+ generic USB_HID driver and all incoming events will be multiplexed
+ into a single mouse and a single keyboard device.
config HID_LOGITECH_HIDPP
tristate "Logitech HID++ devices support"
depends on HID_LOGITECH
select POWER_SUPPLY
help
- Support for Logitech devices relyingon the HID++ Logitech specification
+ Support for Logitech devices relying on the HID++ Logitech specification.
- Say Y if you want support for Logitech devices relying on the HID++
- specification. Such devices are the various Logitech Touchpads (T650,
- T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
- Keyboard).
+ Say Y if you want support for Logitech devices relying on the HID++
+ specification. Such devices are the various Logitech Touchpads (T650,
+ T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar
+ Keyboard).
config LOGITECH_FF
bool "Logitech force feedback support"
@@ -631,32 +634,32 @@ config HID_MAGICMOUSE
tristate "Apple Magic Mouse/Trackpad multi-touch support"
depends on HID
help
- Support for the Apple Magic Mouse/Trackpad multi-touch.
+ Support for the Apple Magic Mouse/Trackpad multi-touch.
- Say Y here if you want support for the multi-touch features of the
- Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
+ Say Y here if you want support for the multi-touch features of the
+ Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
config HID_MALTRON
tristate "Maltron L90 keyboard"
depends on HID
help
- Adds support for the volume up, volume down, mute, and play/pause buttons
- of the Maltron L90 keyboard.
+ Adds support for the volume up, volume down, mute, and play/pause buttons
+ of the Maltron L90 keyboard.
config HID_MAYFLASH
tristate "Mayflash game controller adapter force feedback"
depends on HID
select INPUT_FF_MEMLESS
help
- Say Y here if you have HJZ Mayflash PS3 game controller adapters
- and want to enable force feedback support.
+ Say Y here if you have HJZ Mayflash PS3 game controller adapters
+ and want to enable force feedback support.
config HID_REDRAGON
tristate "Redragon keyboards"
depends on HID
default !EXPERT
help
- Support for Redragon keyboards that need fix-ups to work properly.
+ Support for Redragon keyboards that need fix-ups to work properly.
config HID_MICROSOFT
tristate "Microsoft non-fully HID-compliant devices"
@@ -664,14 +667,15 @@ config HID_MICROSOFT
default !EXPERT
select INPUT_FF_MEMLESS
help
- Support for Microsoft devices that are not fully compliant with HID standard.
+ Support for Microsoft devices that are not fully compliant with HID
+ standard.
config HID_MONTEREY
tristate "Monterey Genius KB29E keyboard"
depends on HID
default !EXPERT
help
- Support for Monterey Genius KB29E.
+ Support for Monterey Genius KB29E.
config HID_MULTITOUCH
tristate "HID Multitouch panels"
@@ -722,23 +726,23 @@ config HID_MULTITOUCH
config HID_NTI
tristate "NTI keyboard adapters"
help
- Support for the "extra" Sun keyboard keys on keyboards attached
- through Network Technologies USB-SUN keyboard adapters.
+ Support for the "extra" Sun keyboard keys on keyboards attached
+ through Network Technologies USB-SUN keyboard adapters.
config HID_NTRIG
tristate "N-Trig touch screen"
depends on USB_HID
help
- Support for N-Trig touch screen.
+ Support for N-Trig touch screen.
config HID_ORTEK
tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad"
depends on HID
help
- There are certain devices which have LogicalMaximum wrong in the keyboard
- usage page of their report descriptor. The most prevailing ones so far
- are manufactured by Ortek, thus the name of the driver. Currently
- supported devices by this driver are
+ There are certain devices which have LogicalMaximum wrong in the keyboard
+ usage page of their report descriptor. The most prevailing ones so far
+ are manufactured by Ortek, thus the name of the driver. Currently
+ supported devices by this driver are
- Ortek PKB-1700
- Ortek WKB-2000
@@ -765,7 +769,7 @@ config HID_PENMOUNT
help
This selects a driver for the PenMount 6000 touch controller.
- The driver works around a problem in the report descript allowing
+ The driver works around a problem in the report descriptor allowing
the userspace to touch events instead of mouse events.
Say Y here if you have a Penmount based touch controller.
@@ -774,7 +778,7 @@ config HID_PETALYNX
tristate "Petalynx Maxter remote control"
depends on HID
help
- Support for Petalynx Maxter remote control.
+ Support for Petalynx Maxter remote control.
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
@@ -786,7 +790,7 @@ config HID_PICOLCD
This includes support for the following device features:
- Keypad
- Switching between Firmware and Flash mode
- - EEProm / Flash access (via debugfs)
+ - EEProm / Flash access (via debugfs)
Features selectively enabled:
- Framebuffer for monochrome 256x64 display
- Backlight control
@@ -857,41 +861,41 @@ config HID_PRIMAX
tristate "Primax non-fully HID-compliant devices"
depends on HID
help
- Support for Primax devices that are not fully compliant with the
- HID standard.
+ Support for Primax devices that are not fully compliant with the
+ HID standard.
config HID_RETRODE
tristate "Retrode 2 USB adapter for vintage video games"
depends on USB_HID
help
- Support for
+ Support for
* Retrode 2 cartridge and controller adapter
config HID_ROCCAT
tristate "Roccat device support"
depends on USB_HID
help
- Support for Roccat devices.
- Say Y here if you have a Roccat mouse or keyboard and want
- support for its special functionalities.
+ Support for Roccat devices.
+ Say Y here if you have a Roccat mouse or keyboard and want
+ support for its special functionalities.
config HID_SAITEK
tristate "Saitek (Mad Catz) non-fully HID-compliant devices"
depends on HID
help
- Support for Saitek devices that are not fully compliant with the
- HID standard.
+ Support for Saitek devices that are not fully compliant with the
+ HID standard.
- Supported devices:
- - PS1000 Dual Analog Pad
- - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
- - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
+ Supported devices:
+ - PS1000 Dual Analog Pad
+ - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
+ - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
depends on HID
help
- Support for Samsung InfraRed remote control or keyboards.
+ Support for Samsung InfraRed remote control or keyboards.
config HID_SONY
tristate "Sony PS2/3/4 accessories"
@@ -901,7 +905,7 @@ config HID_SONY
select POWER_SUPPLY
select CRC32
help
- Support for
+ Support for
* Sony PS3 6-axis controllers
* Sony PS4 DualShock 4 controllers
@@ -911,39 +915,39 @@ config HID_SONY
* Guitar Hero Live PS3 and Wii U guitar dongles
config SONY_FF
- bool "Sony PS2/3/4 accessories force feedback support"
+ bool "Sony PS2/3/4 accessories force feedback support"
depends on HID_SONY
select INPUT_FF_MEMLESS
help
- Say Y here if you have a Sony PS2/3/4 accessory and want to enable
- force feedback support for it.
+ Say Y here if you have a Sony PS2/3/4 accessory and want to enable
+ force feedback support for it.
config HID_SPEEDLINK
tristate "Speedlink VAD Cezanne mouse support"
depends on HID
help
- Support for Speedlink Vicious and Divine Cezanne mouse.
+ Support for Speedlink Vicious and Divine Cezanne mouse.
config HID_STEAM
tristate "Steam Controller support"
depends on HID
select POWER_SUPPLY
help
- Say Y here if you have a Steam Controller if you want to use it
- without running the Steam Client. It supports both the wired and
- the wireless adaptor.
+ Say Y here if you have a Steam Controller if you want to use it
+ without running the Steam Client. It supports both the wired and
+ the wireless adaptor.
config HID_STEELSERIES
tristate "Steelseries SRW-S1 steering wheel support"
depends on HID
help
- Support for Steelseries SRW-S1 steering wheel
+ Support for Steelseries SRW-S1 steering wheel.
config HID_SUNPLUS
tristate "Sunplus wireless desktop"
depends on HID
help
- Support for Sunplus wireless desktop.
+ Support for Sunplus wireless desktop.
config HID_RMI
tristate "Synaptics RMI4 device support"
@@ -954,9 +958,9 @@ config HID_RMI
select RMI4_F12
select RMI4_F30
help
- Support for Synaptics RMI4 touchpads.
- Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
- and want support for its special functionalities.
+ Support for Synaptics RMI4 touchpads.
+ Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid
+ and want support for its special functionalities.
config HID_GREENASIA
tristate "GreenAsia (Product ID 0x12) game controller support"
@@ -970,33 +974,33 @@ config GREENASIA_FF
depends on HID_GREENASIA
select INPUT_FF_MEMLESS
help
- Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
- (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
- and want to enable force feedback support for it.
+ Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
+ (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
+ and want to enable force feedback support for it.
config HID_HYPERV_MOUSE
tristate "Microsoft Hyper-V mouse driver"
depends on HYPERV
help
- Select this option to enable the Hyper-V mouse driver.
+ Select this option to enable the Hyper-V mouse driver.
config HID_SMARTJOYPLUS
tristate "SmartJoy PLUS PS2/USB adapter support"
depends on HID
help
- Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
- Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
+ Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box,
+ Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro.
- Note that DDR (Dance Dance Revolution) mode is not supported, nor
- is pressure sensitive buttons on the pro models.
+ Note that DDR (Dance Dance Revolution) mode is not supported, nor
+ are pressure sensitive buttons on the Pro models.
config SMARTJOYPLUS_FF
bool "SmartJoy PLUS PS2/USB adapter force feedback support"
depends on HID_SMARTJOYPLUS
select INPUT_FF_MEMLESS
help
- Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
- enable force feedback support for it.
+ Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
+ enable force feedback support for it.
config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
@@ -1008,8 +1012,8 @@ config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
depends on HID
help
- Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
- CLLRCMCE remote control.
+ Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic
+ CLLRCMCE remote control.
config HID_THINGM
tristate "ThingM blink(1) USB RGB LED"
@@ -1017,9 +1021,9 @@ config HID_THINGM
depends on LEDS_CLASS
select HID_LED
help
- Support for the ThingM blink(1) USB RGB LED. This driver has been
- merged into the generic hid led driver. Config symbol HID_THINGM
- just selects HID_LED and will be removed soon.
+ Support for the ThingM blink(1) USB RGB LED. This driver has been
+ merged into the generic hid led driver. Config symbol HID_THINGM
+ just selects HID_LED and will be removed soon.
config HID_THRUSTMASTER
tristate "ThrustMaster devices support"
@@ -1081,31 +1085,31 @@ config HID_WIIMOTE
select POWER_SUPPLY
select INPUT_FF_MEMLESS
help
- Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
- devices are the Wii Remote and its extension devices, but also devices
- based on the Wii Remote like the Wii U Pro Controller or the
- Wii Balance Board.
-
- Support for all official Nintendo extensions is available, however, 3rd
- party extensions might not be supported. Please report these devices to:
- http://github.com/dvdhrm/xwiimote/issues
-
- Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
- the Wii U Gamepad) might be supported in the future. But currently
- support is limited to Bluetooth based devices.
+ Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
+ devices are the Wii Remote and its extension devices, but also devices
+ based on the Wii Remote like the Wii U Pro Controller or the
+ Wii Balance Board.
+
+ Support for all official Nintendo extensions is available, however, 3rd
+ party extensions might not be supported. Please report these devices to:
+ http://github.com/dvdhrm/xwiimote/issues
+
+ Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
+ the Wii U Gamepad) might be supported in the future. But currently
+ support is limited to Bluetooth based devices.
- If unsure, say N.
+ If unsure, say N.
- To compile this driver as a module, choose M here: the
- module will be called hid-wiimote.
+ To compile this driver as a module, choose M here: the
+ module will be called hid-wiimote.
config HID_XINMO
tristate "Xin-Mo non-fully compliant devices"
depends on HID
help
- Support for Xin-Mo devices that are not fully compliant with the HID
- standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
- if you have a Xin-Mo Dual Arcade controller.
+ Support for Xin-Mo devices that are not fully compliant with the HID
+ standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
+ if you have a Xin-Mo Dual Arcade controller.
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
@@ -1160,20 +1164,20 @@ config HID_ALPS
tristate "Alps HID device support"
depends on HID
help
- Support for Alps I2C HID touchpads and StickPointer.
- Say Y here if you have a Alps touchpads over i2c-hid or usbhid
- and want support for its special functionalities.
+ Support for Alps I2C HID touchpads and StickPointer.
+ Say Y here if you have a Alps touchpads over i2c-hid or usbhid
+ and want support for its special functionalities.
config HID_MCP2221
tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
depends on USB_HID && I2C
depends on GPIOLIB
help
- Provides I2C and SMBUS host adapter functionality over USB-HID
- through MCP2221 device.
+ Provides I2C and SMBUS host adapter functionality over USB-HID
+ through MCP2221 device.
- To compile this driver as a module, choose M here: the module
- will be called hid-mcp2221.ko.
+ To compile this driver as a module, choose M here: the module
+ will be called hid-mcp2221.ko.
endmenu
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-01-17 21:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-17 21:20 [PATCH -next] hid: clean up Kconfig Randy Dunlap
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.