All of lore.kernel.org
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@somainline.org>
To: phone-devel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 01/11] arm64: dts: qcom: Add support for remaining Sony Kitakami boards
Date: Mon, 18 Jan 2021 17:24:21 +0100	[thread overview]
Message-ID: <20210118162432.107275-1-konrad.dybcio@somainline.org> (raw)

This patch adds support for the following Xperias:

* Z3+ [aka Z4 in some regions] (Ivy)
* Z4 Tablet (Karin)
* Z4 Tablet Wi-Fi (Karin_windy) [APQ8094]
* Z5 Compact (Suzuran)
* Z5 Premium (Satsuki)

These devices are very similar in terms of hardware, with main
differences being display panels.

While at it, update comments describing hardware used:
SMB charger seems to not be used after all, PMI8994 charger
is in use instead.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/Makefile             |  5 +++++
 ...q8094-sony-xperia-kitakami-karin_windy.dts | 20 ++++++++++++++++++
 .../qcom/msm8994-sony-xperia-kitakami-ivy.dts | 13 ++++++++++++
 .../msm8994-sony-xperia-kitakami-karin.dts    | 21 +++++++++++++++++++
 .../msm8994-sony-xperia-kitakami-satsuki.dts  | 13 ++++++++++++
 .../msm8994-sony-xperia-kitakami-suzuran.dts  | 13 ++++++++++++
 .../qcom/msm8994-sony-xperia-kitakami.dtsi    | 15 ++++++++++---
 7 files changed, 97 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5113fac80b7a..6e784c7b0621 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
@@ -13,7 +14,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-talkman.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-msft-lumia-cityman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-ivy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-karin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-satsuki.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-suzuran.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
new file mode 100644
index 000000000000..60497457a555
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* As the names may imply, there is quite a bunch of duplication there. */
+#include "msm8994-sony-xperia-kitakami-karin.dts"
+
+/ {
+	model = "Sony Xperia Z4 Tablet (Wi-Fi)";
+	compatible = "sony,karin_windy", "qcom,apq8094";
+
+	/*
+	 * This model uses the APQ variant of MSM8994 (APQ8094).
+	 * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here.
+	 */
+	qcom,msm-id = <253 0x20000>, <253 0x20001>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
new file mode 100644
index 000000000000..4c7a90987f08
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z3+/Z4";
+	compatible = "sony,ivy-row", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
new file mode 100644
index 000000000000..7e657861387b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z4 Tablet (LTE)";
+	compatible = "sony,karin-row", "qcom,msm8994";
+};
+
+&blsp_i2c5 {
+	/*
+	 * TI LP8557 backlight driver @ 2c
+	 * AD AD7146 touch controller @ 2f
+	 * sii8620 HDMI/MHL bridge @ 72 (kitakami-common)
+	 */
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
new file mode 100644
index 000000000000..1081fe6a4d67
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5 Premium";
+	compatible = "sony,satsuki-row", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
new file mode 100644
index 000000000000..2c670ab28613
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5 Compact";
+	compatible = "sony,suzuran-row", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 791f254ac3f8..71d7187eb090 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -11,8 +11,17 @@
 
 / {
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <0xcf 0x20001>;
+
+	/*
+	 * We support MSM8994 v2 (0x20000) and v2.1 (0x20001).
+	 * The V1 chip (0x0 and 0x10000) is significantly different
+	 * and requires driver-side changes (including CPR, be warned!!).
+	 * Besides that, it's very rare.
+	 */
+	qcom,msm-id = <207 0x20000>, <207 0x20001>;
+	/* We only use pm8994+pmi8994. */
 	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+	/* This property is shared across all kitakami devices. */
 	qcom,board-id = <8 0>;
 
 	/* Kitakami firmware doesn't support PSCI */
@@ -120,7 +129,7 @@ &blsp_spi0 {
 &blsp_i2c2 {
 	status = "okay";
 
-	/* NXP NFC */
+	/* NXP PN547 NFC */
 };
 
 &blsp_i2c4 {
@@ -132,7 +141,7 @@ &blsp_i2c4 {
 &blsp_i2c5 {
 	status = "okay";
 
-	/* SMB1357 charger and sii8620 HDMI/MHL bridge */
+	/* sii8620 HDMI/MHL bridge */
 };
 
 &blsp_i2c6 {
-- 
2.29.2


             reply	other threads:[~2021-01-18 16:26 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-18 16:24 Konrad Dybcio [this message]
2021-01-18 16:24 ` [PATCH 02/11] arm64: dts: qcom: msm8992-bullhead: Update regulator config Konrad Dybcio
2021-01-18 16:24 ` [PATCH 03/11] arm64: dts: qcom: msm8992-libra: " Konrad Dybcio
2021-01-18 16:24 ` [PATCH 04/11] arm64: dts: qcom: msm8992/4: Rename vreg_vph_pwr to vph_pwr Konrad Dybcio
2021-01-18 16:24 ` [PATCH 05/11] arm64: dts: qcom: msm/apq8994-kitakami: Add regulator config Konrad Dybcio
2021-01-18 16:24 ` [PATCH 06/11] arm64: dts: qcom: msm8994-kitakami: Add Synaptics RMI touchscreen Konrad Dybcio
2021-01-18 16:24 ` [PATCH 07/11] arm64: dts: qcom: msm8994-kitakami: Add uSD card support Konrad Dybcio
2021-01-18 16:24 ` [PATCH 08/11] arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator Konrad Dybcio
2021-01-18 16:24 ` [PATCH 09/11] arm64: dts: qcom: msm8994: Fix BLSP2_UART2 node Konrad Dybcio
2021-01-18 16:24 ` [PATCH 10/11] arm64: dts: qcom: msm8994/8994-kitakami: Fix up the memory map Konrad Dybcio
2021-01-18 16:24 ` [PATCH 11/11] arm64: dts: qcom: msm8994-kitakami: Add missing email in the copyright Konrad Dybcio
2021-01-25 18:50 ` [PATCH 01/11] arm64: dts: qcom: Add support for remaining Sony Kitakami boards patchwork-bot+linux-arm-msm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210118162432.107275-1-konrad.dybcio@somainline.org \
    --to=konrad.dybcio@somainline.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.