From mboxrd@z Thu Jan 1 00:00:00 1970 From: Aswath Govindraju Date: Thu, 21 Jan 2021 18:10:34 +0530 Subject: [PATCH v3 02/20] mmc: am654_sdhci: Unconditionally switch off DLL in the beginning of ios_post() In-Reply-To: <20210121124052.3454-1-a-govindraju@ti.com> References: <20210121124052.3454-1-a-govindraju@ti.com> Message-ID: <20210121124052.3454-3-a-govindraju@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Faiz Abbas There are some speed modes that work without switching the dll on. Unconditionally switch off the DLL before setting clock frequency to support this case. The software will automatically enable DLL for speed modes that require it. This also means the dll_on priv data member is no longer required. Signed-off-by: Faiz Abbas Signed-off-by: Aswath Govindraju --- drivers/mmc/am654_sdhci.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c index baa935e0d5b0..33f658fba719 100644 --- a/drivers/mmc/am654_sdhci.c +++ b/drivers/mmc/am654_sdhci.c @@ -84,7 +84,6 @@ struct am654_sdhci_plat { #define IOMUX_PRESENT (1 << 1) #define FREQSEL_2_BIT (1 << 2) #define STRBSEL_4_BIT (1 << 3) - bool dll_on; }; struct timing_data { @@ -141,12 +140,7 @@ static int am654_sdhci_set_ios_post(struct sdhci_host *host) val &= ~SDHCI_CLOCK_CARD_EN; sdhci_writew(host, val, SDHCI_CLOCK_CONTROL); - /* power off phy */ - if (plat->dll_on) { - regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, 0); - - plat->dll_on = false; - } + regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, 0); /* restart clock */ sdhci_set_clock(host->mmc, speed); @@ -212,8 +206,6 @@ static int am654_sdhci_set_ios_post(struct sdhci_host *host) val & DLLRDY_MASK, 1000, 1000000); if (ret) return ret; - - plat->dll_on = true; } return 0; -- 2.17.1