From: Vincent Knecht <vincent.knecht@mailoo.org>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Henrik Rydberg <rydberg@bitmath.org>,
Vincent Knecht <vincent.knecht@mailoo.org>,
Michael Srba <Michael.Srba@seznam.cz>,
Linus Walleij <linus.walleij@linaro.org>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht
Subject: [PATCH v3 1/2] dt-bindings: input/touchscreen: add bindings for msg26xx
Date: Thu, 21 Jan 2021 18:43:47 +0100 [thread overview]
Message-ID: <20210121174359.1455393-1-vincent.knecht@mailoo.org> (raw)
This adds dts bindings for the mstar msg26xx touchscreen.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
Changed in v3:
- added `touchscreen-size-x: true` and `touchscreen-size-y: true` properties
Changed in v2:
- changed M-Star to MStar in title line
- changed reset gpio to active-low in example section
---
.../input/touchscreen/mstar,msg26xx.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
new file mode 100644
index 000000000000..5d26a1008bf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg26xx.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg26xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg26xx touchscreen controller Bindings
+
+maintainers:
+ - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+properties:
+ compatible:
+ const: mstar,msg26xx
+
+ reg:
+ const: 0x26
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vdd-supply:
+ description: Power supply regulator for the chip
+
+ vddio-supply:
+ description: Power supply regulator for the I2C bus
+
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@26 {
+ compatible = "mstar,msg26xx";
+ reg = <0x26>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_active>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ };
+ };
+
+...
--
2.29.2
next reply other threads:[~2021-01-21 17:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 17:43 Vincent Knecht [this message]
2021-01-21 17:43 ` [PATCH v3 2/2] Input: add MStar msg26xx touchscreen driver Vincent Knecht
2021-02-09 16:13 ` [PATCH v3 1/2] dt-bindings: input/touchscreen: add bindings for msg26xx Rob Herring
2021-02-09 18:58 ` Vincent Knecht
2021-02-10 3:10 ` Jeff LaBundy
2021-02-10 17:48 ` Vincent Knecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210121174359.1455393-1-vincent.knecht@mailoo.org \
--to=vincent.knecht@mailoo.org \
--cc=Michael.Srba@seznam.cz \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rydberg@bitmath.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.