* [PATCH v7 0/4] OP-TEE I2C trampoline and associated tests
@ 2021-01-22 17:05 Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 1/4] drivers: tee: i2c trampoline driver Igor Opaniuk
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Igor Opaniuk @ 2021-01-22 17:05 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@foundries.io>
This patchset allows OP-TEE to communicate with I2C devices; a typical
use case would be servicing U-Boot requests that require underlying
cryptographic operations implemented by an I2C chip.
On a board fitted with the NXP SE050 I2C secure element, OP-TEE can
route some of the cryptographic operations it needs to that device (ie
RSA, ECC, CTR..).
Before the REE executes, OP-TEE would use its own I2C drivers to
communicate with the device on the bus; later on, once the REE is up,
accesses to the I2C bus should be coordinated with the REE to avoid
collisions. However instead of implementing such a synchronization
mechanism, this trampoline service permits OP-TEE to route those I2C
requests back to U-boot without then having to worry about collisions.
Lets suppose that U-Boot executes the trusted application Android
Verified Boot; when OP-TEE receives the request - and before executing
the application - it uses RSA to verify it. So on the back of the TA
function invocation, OP-TEE returns to U-boot with a sequence of RPC
calls requesting I2C transfers (check carefully the implementation in
do_call_with_arg(...) implemented in drivers/tee/optee/core.c and
notice the while loop)
When using sandbox testing, RPC is called directly to validate its
actual implementation; however as succintly described above, these
calls will always be originated in OP-TEE.
Changes v7:
* [Etienne Carriere] extended TA param description, adding info about
i2c xfer flags. Applied A-b and R-b tags
* [Jens Wiklander] applied R-b tag
Changes v6:
* [Etienne Carriere] fixed func return code handling
* [Etienne Carriere] tee_optee_ta_uuid passing a pointer instead of full
struct
* [Etienne Carriere] pass additionally i2c control flags in tests
* Fixed mispelling in the comments
Changes v5:
* [Jens Wiklander] Addressed comment about optee_alloc_and_init_page_list():
drop inline, proper return value and comment
Changes v4:
* [Simon Glass] Reduced amount ifdefs warnings and move to
if (IS_ENABLED(CONFIG_*)) where possible
* Fixed pointer-sign warnings
Changes v3:
* [Simon Glass] Added RPC I2C test coverage
Changes v2:
* [Simon Glass] Adjusted the usage of DM internal api (dev_get_parent_platdata)
* [Simon Glass] Added additional comments to functions
* [Jens Wiklander] s/tmem/rmem/g
Igor Opaniuk (3):
test: py: add pygit2 and pyelftools to requirements.txt
drivers: tee: sandbox: add rpc test ta emulation
test: dm: tee: extend with RPC test
Jorge Ramirez-Ortiz (1):
drivers: tee: i2c trampoline driver
drivers/tee/Makefile | 2 +
drivers/tee/optee/Kconfig | 9 ++
drivers/tee/optee/Makefile | 1 +
drivers/tee/optee/i2c.c | 90 ++++++++++++++
drivers/tee/optee/optee_msg.h | 21 ++++
drivers/tee/optee/optee_msg_supplicant.h | 5 +
drivers/tee/optee/optee_private.h | 17 +++
drivers/tee/optee/supplicant.c | 3 +
drivers/tee/sandbox.c | 142 ++++++++++++++++++++++-
include/tee/optee_ta_rpc_test.h | 29 +++++
test/dm/tee.c | 116 ++++++++++++++++--
test/py/requirements.txt | 2 +
12 files changed, 426 insertions(+), 11 deletions(-)
create mode 100644 drivers/tee/optee/i2c.c
create mode 100644 include/tee/optee_ta_rpc_test.h
--
2.25.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v7 1/4] drivers: tee: i2c trampoline driver
2021-01-22 17:05 [PATCH v7 0/4] OP-TEE I2C trampoline and associated tests Igor Opaniuk
@ 2021-01-22 17:05 ` Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 2/4] test: py: add pygit2 and pyelftools to requirements.txt Igor Opaniuk
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Igor Opaniuk @ 2021-01-22 17:05 UTC (permalink / raw)
To: u-boot
From: Jorge Ramirez-Ortiz <jorge@foundries.io>
This commit gives the secure world access to the I2C bus so it can
communicate with I2C slaves (typically those would be secure elements
like the NXP SE050).
A similar service implementation has been merged in linux:
c05210ab ("drivers: optee: allow op-tee to access devices on the i2c
bus")
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
---
drivers/tee/optee/Makefile | 1 +
drivers/tee/optee/i2c.c | 90 ++++++++++++++++++++++++
drivers/tee/optee/optee_msg.h | 21 ++++++
drivers/tee/optee/optee_msg_supplicant.h | 5 ++
drivers/tee/optee/optee_private.h | 17 +++++
drivers/tee/optee/supplicant.c | 3 +
6 files changed, 137 insertions(+)
create mode 100644 drivers/tee/optee/i2c.c
diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
index 928d3f8002..068c6e7aa1 100644
--- a/drivers/tee/optee/Makefile
+++ b/drivers/tee/optee/Makefile
@@ -2,4 +2,5 @@
obj-y += core.o
obj-y += supplicant.o
+obj-$(CONFIG_DM_I2C) += i2c.o
obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
diff --git a/drivers/tee/optee/i2c.c b/drivers/tee/optee/i2c.c
new file mode 100644
index 0000000000..ef4e10f991
--- /dev/null
+++ b/drivers/tee/optee/i2c.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: BSD-2-Clause
+/*
+ * Copyright (c) 2020 Foundries.io Ltd
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <tee.h>
+#include "optee_msg.h"
+#include "optee_private.h"
+
+static int check_xfer_flags(struct udevice *chip, uint tee_flags)
+{
+ uint flags;
+ int ret;
+
+ ret = i2c_get_chip_flags(chip, &flags);
+ if (ret)
+ return ret;
+
+ if (tee_flags & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) {
+ if (!(flags & DM_I2C_CHIP_10BIT))
+ return -EINVAL;
+ } else {
+ if (flags & DM_I2C_CHIP_10BIT)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg)
+{
+ const u8 attr[] = {
+ OPTEE_MSG_ATTR_TYPE_VALUE_INPUT,
+ OPTEE_MSG_ATTR_TYPE_VALUE_INPUT,
+ OPTEE_MSG_ATTR_TYPE_RMEM_INOUT,
+ OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT,
+ };
+ struct udevice *chip_dev;
+ struct tee_shm *shm;
+ u8 *buf;
+ int ret;
+
+ if (arg->num_params != ARRAY_SIZE(attr) ||
+ arg->params[0].attr != attr[0] ||
+ arg->params[1].attr != attr[1] ||
+ arg->params[2].attr != attr[2] ||
+ arg->params[3].attr != attr[3]) {
+ goto bad;
+ }
+
+ shm = (struct tee_shm *)(unsigned long)arg->params[2].u.rmem.shm_ref;
+ buf = shm->addr;
+ if (!buf)
+ goto bad;
+
+ if (i2c_get_chip_for_busnum((int)arg->params[0].u.value.b,
+ (int)arg->params[0].u.value.c,
+ 0, &chip_dev))
+ goto bad;
+
+ if (check_xfer_flags(chip_dev, arg->params[1].u.value.a))
+ goto bad;
+
+ switch (arg->params[0].u.value.a) {
+ case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
+ ret = dm_i2c_read(chip_dev, 0, buf,
+ (size_t)arg->params[2].u.rmem.size);
+ break;
+ case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
+ ret = dm_i2c_write(chip_dev, 0, buf,
+ (size_t)arg->params[2].u.rmem.size);
+ break;
+ default:
+ goto bad;
+ }
+
+ if (ret) {
+ arg->ret = TEE_ERROR_COMMUNICATION;
+ } else {
+ arg->params[3].u.value.a = arg->params[2].u.rmem.size;
+ arg->ret = TEE_SUCCESS;
+ }
+
+ return;
+bad:
+ arg->ret = TEE_ERROR_BAD_PARAMETERS;
+}
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
index 24c60960fc..8d40ce60c2 100644
--- a/drivers/tee/optee/optee_msg.h
+++ b/drivers/tee/optee/optee_msg.h
@@ -422,4 +422,25 @@ struct optee_msg_arg {
*/
#define OPTEE_MSG_RPC_CMD_SHM_FREE 7
+/*
+ * Access a device on an i2c bus
+ *
+ * [in] param[0].u.value.a mode: RD(0), WR(1)
+ * [in] param[0].u.value.b i2c adapter
+ * [in] param[0].u.value.c i2c chip
+ *
+ * [in] param[1].u.value.a i2c control flags
+ *
+ * [in/out] memref[2] buffer to exchange the transfer data
+ * with the secure world
+ *
+ * [out] param[3].u.value.a bytes transferred by the driver
+ */
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21
+/* I2C master transfer modes */
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1
+/* I2C master control flags */
+#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0)
+
#endif /* _OPTEE_MSG_H */
diff --git a/drivers/tee/optee/optee_msg_supplicant.h b/drivers/tee/optee/optee_msg_supplicant.h
index a0fb8063c8..963cfd4782 100644
--- a/drivers/tee/optee/optee_msg_supplicant.h
+++ b/drivers/tee/optee/optee_msg_supplicant.h
@@ -147,6 +147,11 @@
#define OPTEE_MSG_RPC_CMD_SHM_ALLOC 6
#define OPTEE_MSG_RPC_CMD_SHM_FREE 7
+/*
+ * I2C bus access
+ */
+#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21
+
/*
* Was OPTEE_MSG_RPC_CMD_SQL_FS, which isn't supported any longer
*/
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 9442d1c176..1f07a27ee4 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -60,6 +60,23 @@ static inline void optee_suppl_rpmb_release(struct udevice *dev)
}
#endif
+#ifdef CONFIG_DM_I2C
+/**
+ * optee_suppl_cmd_i2c_transfer() - route I2C requests to an I2C chip
+ * @arg: OP-TEE message (layout specified in optee_msg.h) defining the
+ * transfer mode (read/write), adapter, chip and control flags.
+ *
+ * Handles OP-TEE requests to transfer data to the I2C chip on the I2C adapter.
+ */
+void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg);
+#else
+static inline void optee_suppl_cmd_i2c_transfer(struct optee_msg_arg *arg)
+{
+ debug("OPTEE_MSG_RPC_CMD_I2C_TRANSFER not implemented\n");
+ arg->ret = TEE_ERROR_NOT_IMPLEMENTED;
+}
+#endif
+
void *optee_alloc_and_init_page_list(void *buf, ulong len, u64 *phys_buf_ptr);
#endif /* __OPTEE_PRIVATE_H */
diff --git a/drivers/tee/optee/supplicant.c b/drivers/tee/optee/supplicant.c
index ae042b9a20..f9dd874b59 100644
--- a/drivers/tee/optee/supplicant.c
+++ b/drivers/tee/optee/supplicant.c
@@ -89,6 +89,9 @@ void optee_suppl_cmd(struct udevice *dev, struct tee_shm *shm_arg,
case OPTEE_MSG_RPC_CMD_RPMB:
optee_suppl_cmd_rpmb(dev, arg);
break;
+ case OPTEE_MSG_RPC_CMD_I2C_TRANSFER:
+ optee_suppl_cmd_i2c_transfer(arg);
+ break;
default:
arg->ret = TEE_ERROR_NOT_IMPLEMENTED;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v7 2/4] test: py: add pygit2 and pyelftools to requirements.txt
2021-01-22 17:05 [PATCH v7 0/4] OP-TEE I2C trampoline and associated tests Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 1/4] drivers: tee: i2c trampoline driver Igor Opaniuk
@ 2021-01-22 17:05 ` Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 3/4] drivers: tee: sandbox: add rpc test ta emulation Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 4/4] test: dm: tee: extend with RPC test Igor Opaniuk
3 siblings, 0 replies; 7+ messages in thread
From: Igor Opaniuk @ 2021-01-22 17:05 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@foundries.io>
Add pygit2 and pyelftools to the list of packages for virtualenv
needed to run all sets of pytests.This fixes warnings like:
binman.elf_test.TestElf.testDecodeElf (subunit.RemotedTestCase):
Python elftools not available
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
test/py/requirements.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/test/py/requirements.txt b/test/py/requirements.txt
index cf251186f4..926bccad69 100644
--- a/test/py/requirements.txt
+++ b/test/py/requirements.txt
@@ -10,6 +10,8 @@ packaging==19.2
pbr==5.4.3
pluggy==0.13.0
py==1.8.0
+pyelftools==0.27
+pygit2==1.4.0
pyparsing==2.4.2
pytest==5.2.1
python-mimeparse==1.6.0
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v7 3/4] drivers: tee: sandbox: add rpc test ta emulation
2021-01-22 17:05 [PATCH v7 0/4] OP-TEE I2C trampoline and associated tests Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 1/4] drivers: tee: i2c trampoline driver Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 2/4] test: py: add pygit2 and pyelftools to requirements.txt Igor Opaniuk
@ 2021-01-22 17:05 ` Igor Opaniuk
2021-01-23 9:28 ` Etienne Carriere
2021-01-22 17:05 ` [PATCH v7 4/4] test: dm: tee: extend with RPC test Igor Opaniuk
3 siblings, 1 reply; 7+ messages in thread
From: Igor Opaniuk @ 2021-01-22 17:05 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@foundries.io>
This adds support for RPC test trusted application emulation, which
permits to test reverse RPC calls to TEE supplicant. Currently it covers
requests to the I2C bus from TEE.
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
---
drivers/tee/Makefile | 2 +
drivers/tee/optee/Kconfig | 9 ++
drivers/tee/sandbox.c | 142 +++++++++++++++++++++++++++++++-
include/tee/optee_ta_rpc_test.h | 29 +++++++
4 files changed, 178 insertions(+), 4 deletions(-)
create mode 100644 include/tee/optee_ta_rpc_test.h
diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile
index 5c8ffdbce8..ff844195ae 100644
--- a/drivers/tee/Makefile
+++ b/drivers/tee/Makefile
@@ -2,5 +2,7 @@
obj-y += tee-uclass.o
obj-$(CONFIG_SANDBOX) += sandbox.o
+obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/supplicant.o
+obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/i2c.o
obj-$(CONFIG_OPTEE) += optee/
obj-y += broadcom/
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
index d489834df9..65622f30b1 100644
--- a/drivers/tee/optee/Kconfig
+++ b/drivers/tee/optee/Kconfig
@@ -22,6 +22,15 @@ config OPTEE_TA_AVB
The TA can support the "avb" subcommands "read_rb", "write"rb"
and "is_unlocked".
+config OPTEE_TA_RPC_TEST
+ bool "Support RPC TEST TA"
+ depends on SANDBOX_TEE
+ default y
+ help
+ Enables support for RPC test trusted application emulation, which
+ permits to test reverse RPC calls to TEE supplicant. Should
+ be used only in sandbox env.
+
endmenu
endif
diff --git a/drivers/tee/sandbox.c b/drivers/tee/sandbox.c
index e1ba027fd6..3a1d34d6fc 100644
--- a/drivers/tee/sandbox.c
+++ b/drivers/tee/sandbox.c
@@ -7,11 +7,15 @@
#include <sandboxtee.h>
#include <tee.h>
#include <tee/optee_ta_avb.h>
+#include <tee/optee_ta_rpc_test.h>
+
+#include "optee/optee_msg.h"
+#include "optee/optee_private.h"
/*
* The sandbox tee driver tries to emulate a generic Trusted Exectution
- * Environment (TEE) with the Trusted Application (TA) OPTEE_TA_AVB
- * available.
+ * Environment (TEE) with the Trusted Applications (TA) OPTEE_TA_AVB and
+ * OPTEE_TA_RPC_TEST available.
*/
static const u32 pstorage_max = 16;
@@ -32,7 +36,38 @@ struct ta_entry {
struct tee_param *params);
};
-#ifdef CONFIG_OPTEE_TA_AVB
+static int get_msg_arg(struct udevice *dev, uint num_params,
+ struct tee_shm **shmp, struct optee_msg_arg **msg_arg)
+{
+ int rc;
+ struct optee_msg_arg *ma;
+
+ rc = __tee_shm_add(dev, OPTEE_MSG_NONCONTIG_PAGE_SIZE, NULL,
+ OPTEE_MSG_GET_ARG_SIZE(num_params), TEE_SHM_ALLOC,
+ shmp);
+ if (rc)
+ return rc;
+
+ ma = (*shmp)->addr;
+ memset(ma, 0, OPTEE_MSG_GET_ARG_SIZE(num_params));
+ ma->num_params = num_params;
+ *msg_arg = ma;
+
+ return 0;
+}
+
+void *optee_alloc_and_init_page_list(void *buf, ulong len,
+ u64 *phys_buf_ptr)
+{
+ /*
+ * An empty stub is added just to fix linking issues.
+ * This function isn't supposed to be called in sandbox
+ * setup, otherwise replace this with a proper
+ * implementation from optee/core.c
+ */
+ return NULL;
+}
+
static u32 get_attr(uint n, uint num_params, struct tee_param *params)
{
if (n >= num_params)
@@ -63,6 +98,7 @@ bad_params:
return TEE_ERROR_BAD_PARAMETERS;
}
+#ifdef CONFIG_OPTEE_TA_AVB
static u32 ta_avb_open_session(struct udevice *dev, uint num_params,
struct tee_param *params)
{
@@ -214,7 +250,99 @@ static u32 ta_avb_invoke_func(struct udevice *dev, u32 func, uint num_params,
return TEE_ERROR_NOT_SUPPORTED;
}
}
-#endif /*OPTEE_TA_AVB*/
+#endif /* OPTEE_TA_AVB */
+
+#ifdef CONFIG_OPTEE_TA_RPC_TEST
+static u32 ta_rpc_test_open_session(struct udevice *dev, uint num_params,
+ struct tee_param *params)
+{
+ /*
+ * We don't expect additional parameters when opening a session to
+ * this TA.
+ */
+ return check_params(TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE,
+ TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE,
+ num_params, params);
+}
+
+static void fill_i2c_rpc_params(struct optee_msg_arg *msg_arg, u64 bus_num,
+ u64 chip_addr, u64 xfer_flags, u64 op,
+ struct tee_param_memref memref)
+{
+ msg_arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
+ msg_arg->params[1].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
+ msg_arg->params[2].attr = OPTEE_MSG_ATTR_TYPE_RMEM_INOUT;
+ msg_arg->params[3].attr = OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT;
+
+ /* trigger I2C services of TEE supplicant */
+ msg_arg->cmd = OPTEE_MSG_RPC_CMD_I2C_TRANSFER;
+
+ msg_arg->params[0].u.value.a = op;
+ msg_arg->params[0].u.value.b = bus_num;
+ msg_arg->params[0].u.value.c = chip_addr;
+ msg_arg->params[1].u.value.a = xfer_flags;
+
+ /* buffer to read/write data */
+ msg_arg->params[2].u.rmem.shm_ref = (ulong)memref.shm;
+ msg_arg->params[2].u.rmem.size = memref.size;
+ msg_arg->params[2].u.rmem.offs = memref.shm_offs;
+
+ msg_arg->num_params = 4;
+}
+
+static u32 ta_rpc_test_invoke_func(struct udevice *dev, u32 func,
+ uint num_params,
+ struct tee_param *params)
+{
+ struct tee_shm *shm;
+ struct tee_param_memref memref_data;
+ struct optee_msg_arg *msg_arg;
+ int chip_addr, bus_num, op, xfer_flags;
+ int res;
+
+ res = check_params(TEE_PARAM_ATTR_TYPE_VALUE_INPUT,
+ TEE_PARAM_ATTR_TYPE_MEMREF_INOUT,
+ TEE_PARAM_ATTR_TYPE_NONE,
+ TEE_PARAM_ATTR_TYPE_NONE,
+ num_params, params);
+ if (res)
+ return TEE_ERROR_BAD_PARAMETERS;
+
+ bus_num = params[0].u.value.a;
+ chip_addr = params[0].u.value.b;
+ xfer_flags = params[0].u.value.c;
+ memref_data = params[1].u.memref;
+
+ switch (func) {
+ case TA_RPC_TEST_CMD_I2C_READ:
+ op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD;
+ break;
+ case TA_RPC_TEST_CMD_I2C_WRITE:
+ op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR;
+ break;
+ default:
+ return TEE_ERROR_NOT_SUPPORTED;
+ }
+
+ /*
+ * Fill params for an RPC call to tee supplicant
+ */
+ res = get_msg_arg(dev, 4, &shm, &msg_arg);
+ if (res)
+ goto out;
+
+ fill_i2c_rpc_params(msg_arg, bus_num, chip_addr, xfer_flags, op,
+ memref_data);
+
+ /* Make an RPC call to tee supplicant */
+ optee_suppl_cmd(dev, shm, 0);
+ res = msg_arg->ret;
+out:
+ tee_shm_free(shm);
+
+ return res;
+}
+#endif /* CONFIG_OPTEE_TA_RPC_TEST */
static const struct ta_entry ta_entries[] = {
#ifdef CONFIG_OPTEE_TA_AVB
@@ -223,6 +351,12 @@ static const struct ta_entry ta_entries[] = {
.invoke_func = ta_avb_invoke_func,
},
#endif
+#ifdef CONFIG_OPTEE_TA_RPC_TEST
+ { .uuid = TA_RPC_TEST_UUID,
+ .open_session = ta_rpc_test_open_session,
+ .invoke_func = ta_rpc_test_invoke_func,
+ },
+#endif
};
static void sandbox_tee_get_version(struct udevice *dev,
diff --git a/include/tee/optee_ta_rpc_test.h b/include/tee/optee_ta_rpc_test.h
new file mode 100644
index 0000000000..fd40f8dd8f
--- /dev/null
+++ b/include/tee/optee_ta_rpc_test.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/* Copyright (c) 2020 Foundries Ltd */
+
+#ifndef __TA_RPC_TEST_H
+#define __TA_RPC_TEST_H
+
+#define TA_RPC_TEST_UUID { 0x48420575, 0x96ca, 0x401a, \
+ { 0x89, 0x91, 0x1e, 0xfd, 0xce, 0xbd, 0x7d, 0x04 } }
+
+/*
+ * Does a reverse RPC call for I2C read
+ *
+ * in params[0].value.a: bus number
+ * in params[0].value.b: chip address
+ * inout params[1].u.memref: buffer to read data
+ */
+#define TA_RPC_TEST_CMD_I2C_READ 0
+
+/*
+ * Does a reverse RPC call for I2C write
+ *
+ * in params[0].value.a: bus number
+ * in params[0].value.b: chip address
+ * in params[0].value.c: control flags
+ * inout params[1].u.memref: buffer with data to write
+ */
+#define TA_RPC_TEST_CMD_I2C_WRITE 1
+
+#endif /* __TA_RPC_TEST_H */
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v7 4/4] test: dm: tee: extend with RPC test
2021-01-22 17:05 [PATCH v7 0/4] OP-TEE I2C trampoline and associated tests Igor Opaniuk
` (2 preceding siblings ...)
2021-01-22 17:05 ` [PATCH v7 3/4] drivers: tee: sandbox: add rpc test ta emulation Igor Opaniuk
@ 2021-01-22 17:05 ` Igor Opaniuk
2021-01-23 9:29 ` Etienne Carriere
3 siblings, 1 reply; 7+ messages in thread
From: Igor Opaniuk @ 2021-01-22 17:05 UTC (permalink / raw)
To: u-boot
From: Igor Opaniuk <igor.opaniuk@foundries.io>
Extend existing DM tee tests adding test coverage for reverse RPC calls.
Currently this commit only adds tests for I2C requests from TEE driver
to TEE supplicant, for instance reading/writing data to emulated i2c
eeprom defines in standard sandbox test device tree
(arch/sandbox/dts/test.dtb):
=> i2c bus
Bus 0: i2c at 0 (active 0)
2c: eeprom at 2c, offset len 1, flags 0
...
Running TEE tests:
=> ut dm tee
Test: dm_test_tee: tee.c
Test: dm_test_tee: tee.c (flat tree)
Failures: 0
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
test/dm/tee.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 109 insertions(+), 7 deletions(-)
diff --git a/test/dm/tee.c b/test/dm/tee.c
index ddbdcfb0cf..7a11bf8913 100644
--- a/test/dm/tee.c
+++ b/test/dm/tee.c
@@ -13,15 +13,16 @@
#include <test/test.h>
#include <test/ut.h>
#include <tee/optee_ta_avb.h>
+#include <tee/optee_ta_rpc_test.h>
-static int open_session(struct udevice *dev, u32 *session)
+static int open_session(struct udevice *dev, u32 *session,
+ struct tee_optee_ta_uuid *uuid)
{
struct tee_open_session_arg arg;
- const struct tee_optee_ta_uuid uuid = TA_AVB_UUID;
int rc;
memset(&arg, 0, sizeof(arg));
- tee_optee_ta_uuid_to_octets(arg.uuid, &uuid);
+ tee_optee_ta_uuid_to_octets(arg.uuid, uuid);
rc = tee_open_session(dev, &arg, 0, NULL);
if (rc)
return rc;
@@ -32,7 +33,7 @@ static int open_session(struct udevice *dev, u32 *session)
return 0;
}
-static int invoke_func(struct udevice *dev, u32 session)
+static int invoke_func_avb(struct udevice *dev, u32 session)
{
struct tee_param param = { .attr = TEE_PARAM_ATTR_TYPE_VALUE_OUTPUT };
struct tee_invoke_arg arg;
@@ -47,6 +48,48 @@ static int invoke_func(struct udevice *dev, u32 session)
return 0;
}
+static int invoke_func_rpc_test(struct udevice *dev, u32 session,
+ u64 op, u64 busnum, u64 chip_addr,
+ u64 xfer_flags, u8 *buf, size_t buf_size)
+{
+ struct tee_param param[2];
+ struct tee_invoke_arg arg;
+ struct tee_shm *shm_buf;
+ int rc;
+
+ memset(&arg, 0, sizeof(arg));
+ arg.session = session;
+ arg.func = op;
+
+ rc = tee_shm_alloc(dev, buf_size,
+ TEE_SHM_ALLOC, &shm_buf);
+ if (rc)
+ return rc;
+
+ if (op == TA_RPC_TEST_CMD_I2C_WRITE)
+ memcpy(shm_buf->addr, buf, buf_size);
+
+ memset(param, 0, sizeof(param));
+ param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT;
+ param[0].u.value.a = busnum;
+ param[0].u.value.b = chip_addr;
+ param[0].u.value.c = xfer_flags;
+ param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INOUT;
+ param[1].u.memref.shm = shm_buf;
+ param[1].u.memref.size = buf_size;
+
+ if (tee_invoke_func(dev, &arg, 2, param) || arg.ret) {
+ rc = -1;
+ goto out;
+ }
+
+ if (op == TA_RPC_TEST_CMD_I2C_READ)
+ memcpy(buf, shm_buf->addr, buf_size);
+out:
+ tee_shm_free(shm_buf);
+ return rc;
+}
+
static int match(struct tee_version_data *vers, const void *data)
{
return vers->gen_caps & TEE_GEN_CAP_GP;
@@ -62,6 +105,7 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars)
struct tee_version_data vers;
struct udevice *dev;
struct sandbox_tee_state *state;
+ struct tee_optee_ta_uuid avb_uuid = TA_AVB_UUID;
u32 session = 0;
int rc;
u8 data[128];
@@ -71,11 +115,11 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars)
state = dev_get_priv(dev);
ut_assert(!state->session);
- rc = open_session(dev, &session);
+ rc = open_session(dev, &session, &avb_uuid);
ut_assert(!rc);
ut_assert(session == state->session);
- rc = invoke_func(dev, session);
+ rc = invoke_func_avb(dev, session);
ut_assert(!rc);
rc = tee_close_session(dev, session);
@@ -100,7 +144,59 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars)
vars->alloc_shm = NULL;
ut_assert(!state->num_shms);
- return 0;
+ return rc;
+}
+
+#define I2C_BUF_SIZE 64
+
+static int test_tee_rpc(struct unit_test_state *uts)
+{
+ struct tee_version_data vers;
+ struct udevice *dev;
+ struct sandbox_tee_state *state;
+ struct tee_optee_ta_uuid rpc_test_uuid = TA_RPC_TEST_UUID;
+ u32 session = 0;
+ int rc;
+
+ char *test_str = "Test string";
+ u8 data[I2C_BUF_SIZE] = {0};
+ u8 data_from_eeprom[I2C_BUF_SIZE] = {0};
+
+ /* Use sandbox I2C EEPROM emulation; bus: 0, chip: 0x2c */
+ u64 bus = 0;
+ u64 chip = 0x2c;
+ u64 xfer_flags = 0;
+
+ dev = tee_find_device(NULL, match, NULL, &vers);
+ ut_assert(dev);
+ state = dev_get_priv(dev);
+ ut_assert(!state->session);
+
+ /* Test RPC call asking for I2C service */
+ rc = open_session(dev, &session, &rpc_test_uuid);
+ ut_assert(!rc);
+ ut_assert(session == state->session);
+
+ /* Write buffer */
+ strncpy((char *)data, test_str, strlen(test_str));
+ rc = invoke_func_rpc_test(dev, session, TA_RPC_TEST_CMD_I2C_WRITE,
+ bus, chip, xfer_flags, data, sizeof(data));
+ ut_assert(!rc);
+
+ /* Read buffer */
+ rc = invoke_func_rpc_test(dev, session, TA_RPC_TEST_CMD_I2C_READ,
+ bus, chip, xfer_flags, data_from_eeprom,
+ sizeof(data_from_eeprom));
+ ut_assert(!rc);
+
+ /* Compare */
+ ut_assert(!memcmp(data, data_from_eeprom, sizeof(data)));
+
+ rc = tee_close_session(dev, session);
+ ut_assert(!rc);
+ ut_assert(!state->session);
+
+ return rc;
}
static int dm_test_tee(struct unit_test_state *uts)
@@ -108,6 +204,12 @@ static int dm_test_tee(struct unit_test_state *uts)
struct test_tee_vars vars = { NULL, NULL };
int rc = test_tee(uts, &vars);
+ if (rc)
+ goto out;
+
+ if (IS_ENABLED(CONFIG_OPTEE_TA_RPC_TEST))
+ rc = test_tee_rpc(uts);
+out:
/* In case test_tee() asserts these may still remain allocated */
tee_shm_free(vars.reg_shm);
tee_shm_free(vars.alloc_shm);
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v7 3/4] drivers: tee: sandbox: add rpc test ta emulation
2021-01-22 17:05 ` [PATCH v7 3/4] drivers: tee: sandbox: add rpc test ta emulation Igor Opaniuk
@ 2021-01-23 9:28 ` Etienne Carriere
0 siblings, 0 replies; 7+ messages in thread
From: Etienne Carriere @ 2021-01-23 9:28 UTC (permalink / raw)
To: u-boot
On Fri, 22 Jan 2021 at 18:06, Igor Opaniuk <igor.opaniuk@foundries.io> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@foundries.io>
>
> This adds support for RPC test trusted application emulation, which
> permits to test reverse RPC calls to TEE supplicant. Currently it covers
> requests to the I2C bus from TEE.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
> ---
>
> drivers/tee/Makefile | 2 +
> drivers/tee/optee/Kconfig | 9 ++
> drivers/tee/sandbox.c | 142 +++++++++++++++++++++++++++++++-
> include/tee/optee_ta_rpc_test.h | 29 +++++++
> 4 files changed, 178 insertions(+), 4 deletions(-)
> create mode 100644 include/tee/optee_ta_rpc_test.h
>
> diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile
> index 5c8ffdbce8..ff844195ae 100644
> --- a/drivers/tee/Makefile
> +++ b/drivers/tee/Makefile
> @@ -2,5 +2,7 @@
>
> obj-y += tee-uclass.o
> obj-$(CONFIG_SANDBOX) += sandbox.o
> +obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/supplicant.o
> +obj-$(CONFIG_OPTEE_TA_RPC_TEST) += optee/i2c.o
> obj-$(CONFIG_OPTEE) += optee/
> obj-y += broadcom/
> diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
> index d489834df9..65622f30b1 100644
> --- a/drivers/tee/optee/Kconfig
> +++ b/drivers/tee/optee/Kconfig
> @@ -22,6 +22,15 @@ config OPTEE_TA_AVB
> The TA can support the "avb" subcommands "read_rb", "write"rb"
> and "is_unlocked".
>
> +config OPTEE_TA_RPC_TEST
> + bool "Support RPC TEST TA"
> + depends on SANDBOX_TEE
> + default y
> + help
> + Enables support for RPC test trusted application emulation, which
> + permits to test reverse RPC calls to TEE supplicant. Should
> + be used only in sandbox env.
> +
> endmenu
>
> endif
> diff --git a/drivers/tee/sandbox.c b/drivers/tee/sandbox.c
> index e1ba027fd6..3a1d34d6fc 100644
> --- a/drivers/tee/sandbox.c
> +++ b/drivers/tee/sandbox.c
> @@ -7,11 +7,15 @@
> #include <sandboxtee.h>
> #include <tee.h>
> #include <tee/optee_ta_avb.h>
> +#include <tee/optee_ta_rpc_test.h>
> +
> +#include "optee/optee_msg.h"
> +#include "optee/optee_private.h"
>
> /*
> * The sandbox tee driver tries to emulate a generic Trusted Exectution
> - * Environment (TEE) with the Trusted Application (TA) OPTEE_TA_AVB
> - * available.
> + * Environment (TEE) with the Trusted Applications (TA) OPTEE_TA_AVB and
> + * OPTEE_TA_RPC_TEST available.
> */
>
> static const u32 pstorage_max = 16;
> @@ -32,7 +36,38 @@ struct ta_entry {
> struct tee_param *params);
> };
>
> -#ifdef CONFIG_OPTEE_TA_AVB
> +static int get_msg_arg(struct udevice *dev, uint num_params,
> + struct tee_shm **shmp, struct optee_msg_arg **msg_arg)
> +{
> + int rc;
> + struct optee_msg_arg *ma;
> +
> + rc = __tee_shm_add(dev, OPTEE_MSG_NONCONTIG_PAGE_SIZE, NULL,
> + OPTEE_MSG_GET_ARG_SIZE(num_params), TEE_SHM_ALLOC,
> + shmp);
> + if (rc)
> + return rc;
> +
> + ma = (*shmp)->addr;
> + memset(ma, 0, OPTEE_MSG_GET_ARG_SIZE(num_params));
> + ma->num_params = num_params;
> + *msg_arg = ma;
> +
> + return 0;
> +}
> +
> +void *optee_alloc_and_init_page_list(void *buf, ulong len,
> + u64 *phys_buf_ptr)
> +{
> + /*
> + * An empty stub is added just to fix linking issues.
> + * This function isn't supposed to be called in sandbox
> + * setup, otherwise replace this with a proper
> + * implementation from optee/core.c
> + */
> + return NULL;
> +}
> +
> static u32 get_attr(uint n, uint num_params, struct tee_param *params)
> {
> if (n >= num_params)
> @@ -63,6 +98,7 @@ bad_params:
> return TEE_ERROR_BAD_PARAMETERS;
> }
>
> +#ifdef CONFIG_OPTEE_TA_AVB
> static u32 ta_avb_open_session(struct udevice *dev, uint num_params,
> struct tee_param *params)
> {
> @@ -214,7 +250,99 @@ static u32 ta_avb_invoke_func(struct udevice *dev, u32 func, uint num_params,
> return TEE_ERROR_NOT_SUPPORTED;
> }
> }
> -#endif /*OPTEE_TA_AVB*/
> +#endif /* OPTEE_TA_AVB */
> +
> +#ifdef CONFIG_OPTEE_TA_RPC_TEST
> +static u32 ta_rpc_test_open_session(struct udevice *dev, uint num_params,
> + struct tee_param *params)
> +{
> + /*
> + * We don't expect additional parameters when opening a session to
> + * this TA.
> + */
> + return check_params(TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE,
> + TEE_PARAM_ATTR_TYPE_NONE, TEE_PARAM_ATTR_TYPE_NONE,
> + num_params, params);
> +}
> +
> +static void fill_i2c_rpc_params(struct optee_msg_arg *msg_arg, u64 bus_num,
> + u64 chip_addr, u64 xfer_flags, u64 op,
> + struct tee_param_memref memref)
> +{
> + msg_arg->params[0].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
> + msg_arg->params[1].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
> + msg_arg->params[2].attr = OPTEE_MSG_ATTR_TYPE_RMEM_INOUT;
> + msg_arg->params[3].attr = OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT;
> +
> + /* trigger I2C services of TEE supplicant */
> + msg_arg->cmd = OPTEE_MSG_RPC_CMD_I2C_TRANSFER;
> +
> + msg_arg->params[0].u.value.a = op;
> + msg_arg->params[0].u.value.b = bus_num;
> + msg_arg->params[0].u.value.c = chip_addr;
> + msg_arg->params[1].u.value.a = xfer_flags;
> +
> + /* buffer to read/write data */
> + msg_arg->params[2].u.rmem.shm_ref = (ulong)memref.shm;
> + msg_arg->params[2].u.rmem.size = memref.size;
> + msg_arg->params[2].u.rmem.offs = memref.shm_offs;
> +
> + msg_arg->num_params = 4;
> +}
> +
> +static u32 ta_rpc_test_invoke_func(struct udevice *dev, u32 func,
> + uint num_params,
> + struct tee_param *params)
> +{
> + struct tee_shm *shm;
> + struct tee_param_memref memref_data;
> + struct optee_msg_arg *msg_arg;
> + int chip_addr, bus_num, op, xfer_flags;
> + int res;
> +
> + res = check_params(TEE_PARAM_ATTR_TYPE_VALUE_INPUT,
> + TEE_PARAM_ATTR_TYPE_MEMREF_INOUT,
> + TEE_PARAM_ATTR_TYPE_NONE,
> + TEE_PARAM_ATTR_TYPE_NONE,
> + num_params, params);
> + if (res)
> + return TEE_ERROR_BAD_PARAMETERS;
> +
> + bus_num = params[0].u.value.a;
> + chip_addr = params[0].u.value.b;
> + xfer_flags = params[0].u.value.c;
> + memref_data = params[1].u.memref;
> +
> + switch (func) {
> + case TA_RPC_TEST_CMD_I2C_READ:
> + op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD;
> + break;
> + case TA_RPC_TEST_CMD_I2C_WRITE:
> + op = OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR;
> + break;
> + default:
> + return TEE_ERROR_NOT_SUPPORTED;
> + }
> +
> + /*
> + * Fill params for an RPC call to tee supplicant
> + */
> + res = get_msg_arg(dev, 4, &shm, &msg_arg);
> + if (res)
> + goto out;
> +
> + fill_i2c_rpc_params(msg_arg, bus_num, chip_addr, xfer_flags, op,
> + memref_data);
> +
> + /* Make an RPC call to tee supplicant */
> + optee_suppl_cmd(dev, shm, 0);
> + res = msg_arg->ret;
> +out:
> + tee_shm_free(shm);
> +
> + return res;
> +}
> +#endif /* CONFIG_OPTEE_TA_RPC_TEST */
>
> static const struct ta_entry ta_entries[] = {
> #ifdef CONFIG_OPTEE_TA_AVB
> @@ -223,6 +351,12 @@ static const struct ta_entry ta_entries[] = {
> .invoke_func = ta_avb_invoke_func,
> },
> #endif
> +#ifdef CONFIG_OPTEE_TA_RPC_TEST
> + { .uuid = TA_RPC_TEST_UUID,
> + .open_session = ta_rpc_test_open_session,
> + .invoke_func = ta_rpc_test_invoke_func,
> + },
> +#endif
> };
>
> static void sandbox_tee_get_version(struct udevice *dev,
> diff --git a/include/tee/optee_ta_rpc_test.h b/include/tee/optee_ta_rpc_test.h
> new file mode 100644
> index 0000000000..fd40f8dd8f
> --- /dev/null
> +++ b/include/tee/optee_ta_rpc_test.h
> @@ -0,0 +1,29 @@
> +/* SPDX-License-Identifier: BSD-2-Clause */
> +/* Copyright (c) 2020 Foundries Ltd */
> +
> +#ifndef __TA_RPC_TEST_H
> +#define __TA_RPC_TEST_H
> +
> +#define TA_RPC_TEST_UUID { 0x48420575, 0x96ca, 0x401a, \
> + { 0x89, 0x91, 0x1e, 0xfd, 0xce, 0xbd, 0x7d, 0x04 } }
> +
> +/*
> + * Does a reverse RPC call for I2C read
> + *
> + * in params[0].value.a: bus number
> + * in params[0].value.b: chip address
Hi Igor,
sorry i forgot to spot the 2 places.
Here also deserves
* in params[0].value.c: control flags
> + * inout params[1].u.memref: buffer to read data
> + */
> +#define TA_RPC_TEST_CMD_I2C_READ 0
> +
> +/*
> + * Does a reverse RPC call for I2C write
> + *
> + * in params[0].value.a: bus number
> + * in params[0].value.b: chip address
> + * in params[0].value.c: control flags
> + * inout params[1].u.memref: buffer with data to write
> + */
> +#define TA_RPC_TEST_CMD_I2C_WRITE 1
> +
> +#endif /* __TA_RPC_TEST_H */
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v7 4/4] test: dm: tee: extend with RPC test
2021-01-22 17:05 ` [PATCH v7 4/4] test: dm: tee: extend with RPC test Igor Opaniuk
@ 2021-01-23 9:29 ` Etienne Carriere
0 siblings, 0 replies; 7+ messages in thread
From: Etienne Carriere @ 2021-01-23 9:29 UTC (permalink / raw)
To: u-boot
by the way,
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
fwiw
br,
etienne
On Fri, 22 Jan 2021 at 18:06, Igor Opaniuk <igor.opaniuk@foundries.io> wrote:
>
> From: Igor Opaniuk <igor.opaniuk@foundries.io>
>
> Extend existing DM tee tests adding test coverage for reverse RPC calls.
> Currently this commit only adds tests for I2C requests from TEE driver
> to TEE supplicant, for instance reading/writing data to emulated i2c
> eeprom defines in standard sandbox test device tree
> (arch/sandbox/dts/test.dtb):
>
> => i2c bus
> Bus 0: i2c at 0 (active 0)
> 2c: eeprom at 2c, offset len 1, flags 0
> ...
>
> Running TEE tests:
> => ut dm tee
> Test: dm_test_tee: tee.c
> Test: dm_test_tee: tee.c (flat tree)
> Failures: 0
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
> Reviewed-by: Simon Glass <sjg@chromium.org>
>
> ---
>
> test/dm/tee.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 109 insertions(+), 7 deletions(-)
>
> diff --git a/test/dm/tee.c b/test/dm/tee.c
> index ddbdcfb0cf..7a11bf8913 100644
> --- a/test/dm/tee.c
> +++ b/test/dm/tee.c
> @@ -13,15 +13,16 @@
> #include <test/test.h>
> #include <test/ut.h>
> #include <tee/optee_ta_avb.h>
> +#include <tee/optee_ta_rpc_test.h>
>
> -static int open_session(struct udevice *dev, u32 *session)
> +static int open_session(struct udevice *dev, u32 *session,
> + struct tee_optee_ta_uuid *uuid)
> {
> struct tee_open_session_arg arg;
> - const struct tee_optee_ta_uuid uuid = TA_AVB_UUID;
> int rc;
>
> memset(&arg, 0, sizeof(arg));
> - tee_optee_ta_uuid_to_octets(arg.uuid, &uuid);
> + tee_optee_ta_uuid_to_octets(arg.uuid, uuid);
> rc = tee_open_session(dev, &arg, 0, NULL);
> if (rc)
> return rc;
> @@ -32,7 +33,7 @@ static int open_session(struct udevice *dev, u32 *session)
> return 0;
> }
>
> -static int invoke_func(struct udevice *dev, u32 session)
> +static int invoke_func_avb(struct udevice *dev, u32 session)
> {
> struct tee_param param = { .attr = TEE_PARAM_ATTR_TYPE_VALUE_OUTPUT };
> struct tee_invoke_arg arg;
> @@ -47,6 +48,48 @@ static int invoke_func(struct udevice *dev, u32 session)
> return 0;
> }
>
> +static int invoke_func_rpc_test(struct udevice *dev, u32 session,
> + u64 op, u64 busnum, u64 chip_addr,
> + u64 xfer_flags, u8 *buf, size_t buf_size)
> +{
> + struct tee_param param[2];
> + struct tee_invoke_arg arg;
> + struct tee_shm *shm_buf;
> + int rc;
> +
> + memset(&arg, 0, sizeof(arg));
> + arg.session = session;
> + arg.func = op;
> +
> + rc = tee_shm_alloc(dev, buf_size,
> + TEE_SHM_ALLOC, &shm_buf);
> + if (rc)
> + return rc;
> +
> + if (op == TA_RPC_TEST_CMD_I2C_WRITE)
> + memcpy(shm_buf->addr, buf, buf_size);
> +
> + memset(param, 0, sizeof(param));
> + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INPUT;
> + param[0].u.value.a = busnum;
> + param[0].u.value.b = chip_addr;
> + param[0].u.value.c = xfer_flags;
> + param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INOUT;
> + param[1].u.memref.shm = shm_buf;
> + param[1].u.memref.size = buf_size;
> +
> + if (tee_invoke_func(dev, &arg, 2, param) || arg.ret) {
> + rc = -1;
> + goto out;
> + }
> +
> + if (op == TA_RPC_TEST_CMD_I2C_READ)
> + memcpy(buf, shm_buf->addr, buf_size);
> +out:
> + tee_shm_free(shm_buf);
> + return rc;
> +}
> +
> static int match(struct tee_version_data *vers, const void *data)
> {
> return vers->gen_caps & TEE_GEN_CAP_GP;
> @@ -62,6 +105,7 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars)
> struct tee_version_data vers;
> struct udevice *dev;
> struct sandbox_tee_state *state;
> + struct tee_optee_ta_uuid avb_uuid = TA_AVB_UUID;
> u32 session = 0;
> int rc;
> u8 data[128];
> @@ -71,11 +115,11 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars)
> state = dev_get_priv(dev);
> ut_assert(!state->session);
>
> - rc = open_session(dev, &session);
> + rc = open_session(dev, &session, &avb_uuid);
> ut_assert(!rc);
> ut_assert(session == state->session);
>
> - rc = invoke_func(dev, session);
> + rc = invoke_func_avb(dev, session);
> ut_assert(!rc);
>
> rc = tee_close_session(dev, session);
> @@ -100,7 +144,59 @@ static int test_tee(struct unit_test_state *uts, struct test_tee_vars *vars)
> vars->alloc_shm = NULL;
> ut_assert(!state->num_shms);
>
> - return 0;
> + return rc;
> +}
> +
> +#define I2C_BUF_SIZE 64
> +
> +static int test_tee_rpc(struct unit_test_state *uts)
> +{
> + struct tee_version_data vers;
> + struct udevice *dev;
> + struct sandbox_tee_state *state;
> + struct tee_optee_ta_uuid rpc_test_uuid = TA_RPC_TEST_UUID;
> + u32 session = 0;
> + int rc;
> +
> + char *test_str = "Test string";
> + u8 data[I2C_BUF_SIZE] = {0};
> + u8 data_from_eeprom[I2C_BUF_SIZE] = {0};
> +
> + /* Use sandbox I2C EEPROM emulation; bus: 0, chip: 0x2c */
> + u64 bus = 0;
> + u64 chip = 0x2c;
> + u64 xfer_flags = 0;
> +
> + dev = tee_find_device(NULL, match, NULL, &vers);
> + ut_assert(dev);
> + state = dev_get_priv(dev);
> + ut_assert(!state->session);
> +
> + /* Test RPC call asking for I2C service */
> + rc = open_session(dev, &session, &rpc_test_uuid);
> + ut_assert(!rc);
> + ut_assert(session == state->session);
> +
> + /* Write buffer */
> + strncpy((char *)data, test_str, strlen(test_str));
> + rc = invoke_func_rpc_test(dev, session, TA_RPC_TEST_CMD_I2C_WRITE,
> + bus, chip, xfer_flags, data, sizeof(data));
> + ut_assert(!rc);
> +
> + /* Read buffer */
> + rc = invoke_func_rpc_test(dev, session, TA_RPC_TEST_CMD_I2C_READ,
> + bus, chip, xfer_flags, data_from_eeprom,
> + sizeof(data_from_eeprom));
> + ut_assert(!rc);
> +
> + /* Compare */
> + ut_assert(!memcmp(data, data_from_eeprom, sizeof(data)));
> +
> + rc = tee_close_session(dev, session);
> + ut_assert(!rc);
> + ut_assert(!state->session);
> +
> + return rc;
> }
>
> static int dm_test_tee(struct unit_test_state *uts)
> @@ -108,6 +204,12 @@ static int dm_test_tee(struct unit_test_state *uts)
> struct test_tee_vars vars = { NULL, NULL };
> int rc = test_tee(uts, &vars);
>
> + if (rc)
> + goto out;
> +
> + if (IS_ENABLED(CONFIG_OPTEE_TA_RPC_TEST))
> + rc = test_tee_rpc(uts);
> +out:
> /* In case test_tee() asserts these may still remain allocated */
> tee_shm_free(vars.reg_shm);
> tee_shm_free(vars.alloc_shm);
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-01-23 9:29 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-22 17:05 [PATCH v7 0/4] OP-TEE I2C trampoline and associated tests Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 1/4] drivers: tee: i2c trampoline driver Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 2/4] test: py: add pygit2 and pyelftools to requirements.txt Igor Opaniuk
2021-01-22 17:05 ` [PATCH v7 3/4] drivers: tee: sandbox: add rpc test ta emulation Igor Opaniuk
2021-01-23 9:28 ` Etienne Carriere
2021-01-22 17:05 ` [PATCH v7 4/4] test: dm: tee: extend with RPC test Igor Opaniuk
2021-01-23 9:29 ` Etienne Carriere
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.