[PATCH v4] regulator: Make regulator_sync_voltage() usable by coupled regulators

[Dmitry Osipenko <digetx@gmail.com>]

Make regulator_sync_voltage() to re-balance voltage state of a coupled
regulators instead of changing the voltage directly.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Dmitry Osipenko <digetx@gmail.com> # A500 T20 and Nexus7 T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---

Changelog:

v4: - Now not using goto in the code, like it was suggested by Mark Brown
      in a review comment to v3.

v3: - This patch is factored out from [1] to ease merging of the patches
      that will use the regulator_sync_voltage(). The goal is to get this
      change merged into 5.12, it will remove dependency for the Tegra Core
      power domain driver which will target 5.13.

      [1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=221130

 drivers/regulator/core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 3ae5ccd9277d..8e197b785a31 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4148,7 +4148,11 @@ int regulator_sync_voltage(struct regulator *regulator)
 	if (ret < 0)
 		goto out;
 
-	ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
+	/* balance only, if regulator is coupled */
+	if (rdev->coupling_desc.n_coupled > 1)
+		ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+	else
+		ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
 
 out:
 	regulator_unlock(rdev);
-- 
2.29.2