All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: Brett Creeley <brett.creeley@intel.com>,
	netdev@vger.kernel.org, sassmann@redhat.com,
	anthony.l.nguyen@intel.com,
	Tony Brelinski <tonyx.brelinski@intel.com>
Subject: [PATCH net 6/7] ice: Fix MSI-X vector fallback logic
Date: Fri, 22 Jan 2021 15:57:33 -0800	[thread overview]
Message-ID: <20210122235734.447240-7-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20210122235734.447240-1-anthony.l.nguyen@intel.com>

From: Brett Creeley <brett.creeley@intel.com>

The current MSI-X enablement logic tries to enable best-case MSI-X
vectors and if that fails we only support a bare-minimum set. This
includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X
for the OICR interrupt. Unfortunately, the driver fails to load when we
don't get as many MSI-X as requested for a couple reasons.

First, the code to allocate MSI-X in the driver tries to allocate
num_online_cpus() MSI-X for LAN traffic without caring about the number
of MSI-X actually enabled/requested from the kernel for LAN traffic.
So, when calling ice_get_res() for the PF VSI, it returns failure
because the number of available vectors is less than requested. Fix
this by not allowing the PF VSI to allocation  more than
pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues.
Limiting the number of queues is done because we don't want more than
1 Tx/Rx queue per interrupt due to performance conerns.

Second, the driver assigns pf->num_lan_msix = 2, to account for LAN
traffic and the OICR. However, pf->num_lan_msix is only meant for LAN
MSI-X. This is causing a failure when the PF VSI tries to
allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has
already been reserved, so there may not be enough MSI-X vectors left.
Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the
ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for
the failure case.

Update the related defines used in ice_ena_msix_range() to align with
the above behavior and remove the unused RDMA defines because RDMA is
currently not supported. Also, remove the now incorrect comment.

Fixes: 152b978a1f90 ("ice: Rework ice_ena_msix_range")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice.h      |  4 +++-
 drivers/net/ethernet/intel/ice/ice_lib.c  | 14 +++++++++-----
 drivers/net/ethernet/intel/ice/ice_main.c |  8 ++------
 3 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 56725356a17b..fa1e128c24ec 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -68,7 +68,9 @@
 #define ICE_INT_NAME_STR_LEN	(IFNAMSIZ + 16)
 #define ICE_AQ_LEN		64
 #define ICE_MBXSQ_LEN		64
-#define ICE_MIN_MSIX		2
+#define ICE_MIN_LAN_TXRX_MSIX	1
+#define ICE_MIN_LAN_OICR_MSIX	1
+#define ICE_MIN_MSIX		(ICE_MIN_LAN_TXRX_MSIX + ICE_MIN_LAN_OICR_MSIX)
 #define ICE_FDIR_MSIX		1
 #define ICE_NO_VSI		0xffff
 #define ICE_VSI_MAP_CONTIG	0
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 3df67486d42d..ad9c22a1b97a 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -161,8 +161,9 @@ static void ice_vsi_set_num_qs(struct ice_vsi *vsi, u16 vf_id)
 
 	switch (vsi->type) {
 	case ICE_VSI_PF:
-		vsi->alloc_txq = min_t(int, ice_get_avail_txq_count(pf),
-				       num_online_cpus());
+		vsi->alloc_txq = min3(pf->num_lan_msix,
+				      ice_get_avail_txq_count(pf),
+				      (u16)num_online_cpus());
 		if (vsi->req_txq) {
 			vsi->alloc_txq = vsi->req_txq;
 			vsi->num_txq = vsi->req_txq;
@@ -174,8 +175,9 @@ static void ice_vsi_set_num_qs(struct ice_vsi *vsi, u16 vf_id)
 		if (!test_bit(ICE_FLAG_RSS_ENA, pf->flags)) {
 			vsi->alloc_rxq = 1;
 		} else {
-			vsi->alloc_rxq = min_t(int, ice_get_avail_rxq_count(pf),
-					       num_online_cpus());
+			vsi->alloc_rxq = min3(pf->num_lan_msix,
+					      ice_get_avail_rxq_count(pf),
+					      (u16)num_online_cpus());
 			if (vsi->req_rxq) {
 				vsi->alloc_rxq = vsi->req_rxq;
 				vsi->num_rxq = vsi->req_rxq;
@@ -184,7 +186,9 @@ static void ice_vsi_set_num_qs(struct ice_vsi *vsi, u16 vf_id)
 
 		pf->num_lan_rx = vsi->alloc_rxq;
 
-		vsi->num_q_vectors = max_t(int, vsi->alloc_rxq, vsi->alloc_txq);
+		vsi->num_q_vectors = min_t(int, pf->num_lan_msix,
+					   max_t(int, vsi->alloc_rxq,
+						 vsi->alloc_txq));
 		break;
 	case ICE_VSI_VF:
 		vf = &pf->vf[vsi->vf_id];
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index fb81aa5979e3..e10ca8929f85 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3430,18 +3430,14 @@ static int ice_ena_msix_range(struct ice_pf *pf)
 	if (v_actual < v_budget) {
 		dev_warn(dev, "not enough OS MSI-X vectors. requested = %d, obtained = %d\n",
 			 v_budget, v_actual);
-/* 2 vectors each for LAN and RDMA (traffic + OICR), one for flow director */
-#define ICE_MIN_LAN_VECS 2
-#define ICE_MIN_RDMA_VECS 2
-#define ICE_MIN_VECS (ICE_MIN_LAN_VECS + ICE_MIN_RDMA_VECS + 1)
 
-		if (v_actual < ICE_MIN_LAN_VECS) {
+		if (v_actual < ICE_MIN_MSIX) {
 			/* error if we can't get minimum vectors */
 			pci_disable_msix(pf->pdev);
 			err = -ERANGE;
 			goto msix_err;
 		} else {
-			pf->num_lan_msix = ICE_MIN_LAN_VECS;
+			pf->num_lan_msix = ICE_MIN_LAN_TXRX_MSIX;
 		}
 	}
 
-- 
2.26.2


  parent reply	other threads:[~2021-01-23  0:03 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-22 23:57 [PATCH net 0/7][pull request] Intel Wired LAN Driver Updates 2021-01-22 Tony Nguyen
2021-01-22 23:57 ` [PATCH net 1/7] ice: fix FDir IPv6 flexbyte Tony Nguyen
2021-01-22 23:57 ` [PATCH net 2/7] ice: Implement flow for IPv6 next header (extension header) Tony Nguyen
2021-01-22 23:57 ` [PATCH net 3/7] ice: update dev_addr in ice_set_mac_address even if HW filter exists Tony Nguyen
2021-01-22 23:57 ` [PATCH net 4/7] ice: use correct xdp_ring with XDP_TX action Tony Nguyen
2021-01-24  3:52   ` Jakub Kicinski
2021-01-26 21:33     ` Nguyen, Anthony L
2021-01-22 23:57 ` [PATCH net 5/7] ice: Don't allow more channels than LAN MSI-X available Tony Nguyen
2021-01-22 23:57 ` Tony Nguyen [this message]
2021-01-22 23:57 ` [PATCH net 7/7] i40e: acquire VSI pointer only after VF is initialized Tony Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210122235734.447240-7-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=brett.creeley@intel.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    --cc=tonyx.brelinski@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.