From mboxrd@z Thu Jan  1 00:00:00 1970
From: Lukasz Majewski <lukma@denx.de>
Date: Sat, 23 Jan 2021 13:15:36 +0100
Subject: [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT
In-Reply-To: <8d6dfa51d37a4fcdb2f58516473925de@SFHDAG2NODE3.st.com>
References: <20200909152228.1.I4ae7c1ab59fed4861cde9322a8d12167c9d0187a@changeid>
 <8d6dfa51d37a4fcdb2f58516473925de@SFHDAG2NODE3.st.com>
Message-ID: <20210123131536.15685a00@jawa>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Patrick,

> Hi Lukasz,
> 
> > From: Patrick DELAUNAY <patrick.delaunay@st.com>
> > Sent: mercredi 9 septembre 2020 15:23
> > To: u-boot at lists.denx.de
> > Cc: Patrick DELAUNAY <patrick.delaunay@st.com>; Jagan Teki
> > <jagan@amarulasolutions.com>; Kever Yang
> > <kever.yang@rock-chips.com>; Mingming lee
> > <mingming.lee@mediatek.com>; Miquel Raynal
> > <miquel.raynal@bootlin.com>; Peng Fan <peng.fan@nxp.com>; Simon
> > Glass <sjg@chromium.org>; U-Boot STM32 <uboot-stm32@st-md-
> > mailman.stormreply.com> Subject: [PATCH 1/4] fastboot: mmc: Add
> > CONFIG_FASTBOOT_MMC_USER_SUPPORT
> > Importance: High
> > 
> > Split userdata and boot partition support for eMMC update and
> > correct the description (update is supported).
> > 
> > The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to
> > activate support of userdata partition update, based on target
> > name=CONFIG_FASTBOOT_MMC_USER_NAME
> > 
> > This patch also removes the unnecessary dependency with
> > ARCH_MEDIATEK and EFI_PARTITION.
> > 
> > Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
> > ---
> > 
> >  configs/mt8518_ap1_emmc_defconfig |  1 +
> >  drivers/fastboot/Kconfig          | 22 +++++++++++++++++-----
> >  drivers/fastboot/fb_mmc.c         |  9 ++++++---
> >  3 files changed, 24 insertions(+), 8 deletions(-)
> >   
> 
> Gentle reminder,
> 
> Any comments on this serie [1]
> 
> [1] http://patchwork.ozlabs.org/project/uboot/list/?series=200509
> 
> Patrick 

Could you rebase this on top of current -master (after I do send the
PR) and resend. There are now build / application errors on this series.

Thanks in advance and please find my apologize for very late reply
(covid19 + personal matters).


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210123/03748a27/attachment.sig>