All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Fam Zheng" <fam@euphon.net>,
	"Laurent Vivier" <lvivier@redhat.com>,
	"Hannes Reinecke" <hare@suse.com>,
	qemu-block@nongnu.org, "Thomas Huth" <thuth@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PATCH v2 1/2] tests/qtest: Only run fuzz-megasas-test if megasas device is available
Date: Tue, 26 Jan 2021 12:16:37 +0100	[thread overview]
Message-ID: <20210126111638.3141780-2-philmd@redhat.com> (raw)
In-Reply-To: <20210126111638.3141780-1-philmd@redhat.com>

This test fails when QEMU is built without the megasas device,
restrict it to its availability.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 tests/qtest/fuzz-megasas-test.c | 49 +++++++++++++++++++++++++++++++++
 tests/qtest/fuzz-test.c         | 25 -----------------
 MAINTAINERS                     |  1 +
 tests/qtest/meson.build         |  4 ++-
 4 files changed, 53 insertions(+), 26 deletions(-)
 create mode 100644 tests/qtest/fuzz-megasas-test.c

diff --git a/tests/qtest/fuzz-megasas-test.c b/tests/qtest/fuzz-megasas-test.c
new file mode 100644
index 00000000000..940a76bf25a
--- /dev/null
+++ b/tests/qtest/fuzz-megasas-test.c
@@ -0,0 +1,49 @@
+/*
+ * QTest fuzzer-generated testcase for megasas device
+ *
+ * Copyright (c) 2020 Li Qiang <liq3ea@gmail.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+
+#include "libqos/libqtest.h"
+
+/*
+ * This used to trigger the assert in scsi_dma_complete
+ * https://bugs.launchpad.net/qemu/+bug/1878263
+ */
+static void test_lp1878263_megasas_zero_iov_cnt(void)
+{
+    QTestState *s;
+
+    s = qtest_init("-nographic -monitor none -serial none "
+                   "-M q35 -device megasas -device scsi-cd,drive=null0 "
+                   "-blockdev driver=null-co,read-zeroes=on,node-name=null0");
+    qtest_outl(s, 0xcf8, 0x80001818);
+    qtest_outl(s, 0xcfc, 0xc101);
+    qtest_outl(s, 0xcf8, 0x8000181c);
+    qtest_outl(s, 0xcf8, 0x80001804);
+    qtest_outw(s, 0xcfc, 0x7);
+    qtest_outl(s, 0xcf8, 0x8000186a);
+    qtest_writeb(s, 0x14, 0xfe);
+    qtest_writeb(s, 0x0, 0x02);
+    qtest_outb(s, 0xc1c0, 0x17);
+    qtest_quit(s);
+}
+
+int main(int argc, char **argv)
+{
+    const char *arch = qtest_get_arch();
+
+    g_test_init(&argc, &argv, NULL);
+
+    if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+        qtest_add_func("fuzz/test_lp1878263_megasas_zero_iov_cnt",
+                       test_lp1878263_megasas_zero_iov_cnt);
+    }
+
+    return g_test_run();
+}
diff --git a/tests/qtest/fuzz-test.c b/tests/qtest/fuzz-test.c
index cdb1100a0b8..6188fbb8e96 100644
--- a/tests/qtest/fuzz-test.c
+++ b/tests/qtest/fuzz-test.c
@@ -11,29 +11,6 @@
 
 #include "libqos/libqtest.h"
 
-/*
- * This used to trigger the assert in scsi_dma_complete
- * https://bugs.launchpad.net/qemu/+bug/1878263
- */
-static void test_lp1878263_megasas_zero_iov_cnt(void)
-{
-    QTestState *s;
-
-    s = qtest_init("-nographic -monitor none -serial none "
-                   "-M q35 -device megasas -device scsi-cd,drive=null0 "
-                   "-blockdev driver=null-co,read-zeroes=on,node-name=null0");
-    qtest_outl(s, 0xcf8, 0x80001818);
-    qtest_outl(s, 0xcfc, 0xc101);
-    qtest_outl(s, 0xcf8, 0x8000181c);
-    qtest_outl(s, 0xcf8, 0x80001804);
-    qtest_outw(s, 0xcfc, 0x7);
-    qtest_outl(s, 0xcf8, 0x8000186a);
-    qtest_writeb(s, 0x14, 0xfe);
-    qtest_writeb(s, 0x0, 0x02);
-    qtest_outb(s, 0xc1c0, 0x17);
-    qtest_quit(s);
-}
-
 static void test_lp1878642_pci_bus_get_irq_level_assert(void)
 {
     QTestState *s;
@@ -104,8 +81,6 @@ int main(int argc, char **argv)
     g_test_init(&argc, &argv, NULL);
 
     if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
-        qtest_add_func("fuzz/test_lp1878263_megasas_zero_iov_cnt",
-                       test_lp1878263_megasas_zero_iov_cnt);
         qtest_add_func("fuzz/test_lp1878642_pci_bus_get_irq_level_assert",
                        test_lp1878642_pci_bus_get_irq_level_assert);
         qtest_add_func("fuzz/test_mmio_oob_from_memory_region_cache",
diff --git a/MAINTAINERS b/MAINTAINERS
index 34359a99b8e..44cd74b03cd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1925,6 +1925,7 @@ S: Supported
 F: hw/scsi/megasas.c
 F: hw/scsi/mfi.h
 F: tests/qtest/megasas-test.c
+F: tests/qtest/fuzz-megasas-test.c
 
 Network packet abstractions
 M: Dmitry Fleytman <dmitry.fleytman@gmail.com>
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 16d04625b8b..85682d0dfce 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -4,7 +4,9 @@
   subdir_done()
 endif
 
-qtests_generic = [
+qtests_generic = \
+  (config_all_devices.has_key('CONFIG_MEGASAS_SCSI_PCI') ? ['fuzz-megasas-test'] : []) + \
+  [
   'cdrom-test',
   'device-introspect-test',
   'machine-none-test',
-- 
2.26.2



  reply	other threads:[~2021-01-26 11:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-26 11:16 [PATCH v2 0/2] tests/qtest: Only run fuzz-tests when tested devices are available Philippe Mathieu-Daudé
2021-01-26 11:16 ` Philippe Mathieu-Daudé [this message]
2021-01-26 17:51   ` [PATCH v2 1/2] tests/qtest: Only run fuzz-megasas-test if megasas device is available Thomas Huth
2021-01-26 18:01     ` Alexander Bulekov
2021-01-26 18:12       ` Thomas Huth
2021-01-26 11:16 ` [PATCH v2 2/2] tests/qtest: Only run fuzz-virtio-scsi when virtio-scsi " Philippe Mathieu-Daudé
2021-01-26 17:52   ` Thomas Huth
2021-01-26 11:20 ` [PATCH v2 0/2] tests/qtest: Only run fuzz-tests when tested devices are available Philippe Mathieu-Daudé
2021-01-26 11:28 ` [PATCH v2 3/2] MAINTAINERS: Cover fuzzer reproducer tests within 'Device Fuzzing' Philippe Mathieu-Daudé
2021-01-26 17:56   ` Thomas Huth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210126111638.3141780-2-philmd@redhat.com \
    --to=philmd@redhat.com \
    --cc=fam@euphon.net \
    --cc=hare@suse.com \
    --cc=lvivier@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.