All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH 2/2] arm64: dts: qcom: rb5: Enable PCIe ports and PHY
Date: Thu, 28 Jan 2021 02:42:21 +0300	[thread overview]
Message-ID: <20210127234221.947306-3-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210127234221.947306-1-dmitry.baryshkov@linaro.org>

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

RB5 has 3 PCIe ports exposed to connect PCIe client devices. PCIe0 is
connected to QCA6391 chipset and others are available on the HS3
expansion connector. Hence, enable all of them.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 117 +++++++++++++++++++++++
 1 file changed, 117 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 24903c7ee132..8aebc3660b11 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -558,6 +558,48 @@ &mdss_mdp {
 	status = "okay";
 };
 
+&pcie0 {
+	status = "okay";
+	perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+	status = "okay";
+	perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_default_state>;
+};
+
+&pcie2_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
 &pm8150_gpios {
 	gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
 	gpio-line-names =
@@ -977,6 +1019,81 @@ lt9611_irq_pin: lt9611-irq {
 		bias-disable;
 	};
 
+	pcie0_default_state: pcie0-default {
+		clkreq {
+			pins = "gpio80";
+			function = "pci_e0";
+			bias-pull-up;
+		};
+
+		reset-n {
+			pins = "gpio79";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n {
+			pins = "gpio81";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default {
+		clkreq {
+			pins = "gpio83";
+			function = "pci_e1";
+			bias-pull-up;
+		};
+
+		reset-n {
+			pins = "gpio82";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n {
+			pins = "gpio84";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie2_default_state: pcie2-default {
+		clkreq {
+			pins = "gpio86";
+			function = "pci_e2";
+			bias-pull-up;
+		};
+
+		reset-n {
+			pins = "gpio85";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n {
+			pins = "gpio87";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	sdc2_default_state: sdc2-default {
 		clk {
 			pins = "sdc2_clk";
-- 
2.29.2


      parent reply	other threads:[~2021-01-27 23:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-27 23:42 [PATCH 0/2] Enable PCIe support on rb5 platform Dmitry Baryshkov
2021-01-27 23:42 ` [PATCH 1/2] arm64: dts: qcom: sm8250: Add PCIe suppport Dmitry Baryshkov
2021-01-27 23:42 ` Dmitry Baryshkov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210127234221.947306-3-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.