All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 05/46] arm-virt: refactor gpios creation
Date: Fri, 29 Jan 2021 10:59:31 +0000	[thread overview]
Message-ID: <20210129110012.8660-6-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210129110012.8660-1-peter.maydell@linaro.org>

From: Maxim Uvarov <maxim.uvarov@linaro.org>

No functional change. Just refactor code to better
support secure and normal world gpios.

Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 21 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 86070dfd98b..5e364656037 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -820,17 +820,43 @@ static void virt_powerdown_req(Notifier *n, void *opaque)
     }
 }
 
-static void create_gpio(const VirtMachineState *vms)
+static void create_gpio_keys(const VirtMachineState *vms,
+                             DeviceState *pl061_dev,
+                             uint32_t phandle)
+{
+    gpio_key_dev = sysbus_create_simple("gpio-key", -1,
+                                        qdev_get_gpio_in(pl061_dev, 3));
+
+    qemu_fdt_add_subnode(vms->fdt, "/gpio-keys");
+    qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys");
+    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0);
+    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1);
+
+    qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff");
+    qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff",
+                            "label", "GPIO Key Poweroff");
+    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code",
+                          KEY_POWER);
+    qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff",
+                           "gpios", phandle, 3, 0);
+}
+
+static void create_gpio_devices(const VirtMachineState *vms, int gpio,
+                                MemoryRegion *mem)
 {
     char *nodename;
     DeviceState *pl061_dev;
-    hwaddr base = vms->memmap[VIRT_GPIO].base;
-    hwaddr size = vms->memmap[VIRT_GPIO].size;
-    int irq = vms->irqmap[VIRT_GPIO];
+    hwaddr base = vms->memmap[gpio].base;
+    hwaddr size = vms->memmap[gpio].size;
+    int irq = vms->irqmap[gpio];
     const char compat[] = "arm,pl061\0arm,primecell";
+    SysBusDevice *s;
 
-    pl061_dev = sysbus_create_simple("pl061", base,
-                                     qdev_get_gpio_in(vms->gic, irq));
+    pl061_dev = qdev_new("pl061");
+    s = SYS_BUS_DEVICE(pl061_dev);
+    sysbus_realize_and_unref(s, &error_fatal);
+    memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0));
+    sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq));
 
     uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt);
     nodename = g_strdup_printf("/pl061@%" PRIx64, base);
@@ -847,21 +873,10 @@ static void create_gpio(const VirtMachineState *vms)
     qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk");
     qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle);
 
-    gpio_key_dev = sysbus_create_simple("gpio-key", -1,
-                                        qdev_get_gpio_in(pl061_dev, 3));
-    qemu_fdt_add_subnode(vms->fdt, "/gpio-keys");
-    qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys");
-    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0);
-    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1);
-
-    qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff");
-    qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff",
-                            "label", "GPIO Key Poweroff");
-    qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code",
-                          KEY_POWER);
-    qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff",
-                           "gpios", phandle, 3, 0);
     g_free(nodename);
+
+    /* Child gpio devices */
+    create_gpio_keys(vms, pl061_dev, phandle);
 }
 
 static void create_virtio_devices(const VirtMachineState *vms)
@@ -1990,7 +2005,7 @@ static void machvirt_init(MachineState *machine)
     if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) {
         vms->acpi_dev = create_acpi_ged(vms);
     } else {
-        create_gpio(vms);
+        create_gpio_devices(vms, VIRT_GPIO, sysmem);
     }
 
      /* connect powerdown request */
-- 
2.20.1



  parent reply	other threads:[~2021-01-29 11:02 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-29 10:59 [PULL 00/46] target-arm queue Peter Maydell
2021-01-29 10:59 ` [PULL 01/46] target/arm: Implement ID_PFR2 Peter Maydell
2021-01-29 10:59 ` [PULL 02/46] target/arm: Conditionalize DBGDIDR Peter Maydell
2021-01-29 10:59 ` [PULL 03/46] arm: rename xlnx-zcu102.canbusN properties Peter Maydell
2021-01-29 10:59 ` [PULL 04/46] hw: gpio: implement gpio-pwr driver for qemu reset/poweroff Peter Maydell
2021-01-29 10:59 ` Peter Maydell [this message]
2021-01-29 10:59 ` [PULL 06/46] arm-virt: add secure pl061 for reset/power down Peter Maydell
2021-01-29 10:59 ` [PULL 07/46] hw/misc: Fix arith overflow in NPCM7XX PWM module Peter Maydell
2021-01-29 10:59 ` [PULL 08/46] target/arm: Replace magic value by MMU_DATA_LOAD definition Peter Maydell
2021-01-29 10:59 ` [PULL 09/46] configure: Move preadv check to meson.build Peter Maydell
2021-01-29 10:59 ` [PULL 10/46] configure: cross-compiling with empty cross_prefix Peter Maydell
2021-01-29 10:59 ` [PULL 11/46] osdep: build with non-working system() function Peter Maydell
2021-01-29 10:59 ` [PULL 12/46] darwin: remove redundant dependency declaration Peter Maydell
2021-01-29 10:59 ` [PULL 13/46] darwin: fix cross-compiling for Darwin Peter Maydell
2021-01-29 10:59 ` [PULL 14/46] configure: cross compile should use x86_64 cpu_family Peter Maydell
2021-01-29 10:59 ` [PULL 15/46] darwin: detect CoreAudio for build Peter Maydell
2021-01-29 10:59 ` [PULL 16/46] darwin: remove 64-bit build detection on 32-bit OS Peter Maydell
2021-01-29 10:59 ` [PULL 17/46] hvf: Add hypervisor entitlement to output binaries Peter Maydell
2021-01-29 10:59 ` [PULL 18/46] hw/misc/pvpanic: split-out generic and bus dependent code Peter Maydell
2021-01-29 10:59 ` [PULL 19/46] hw/misc/pvpanic: add PCI interface support Peter Maydell
2021-01-29 10:59 ` [PULL 20/46] pvpanic : update pvpanic spec document Peter Maydell
2021-01-29 10:59 ` [PULL 21/46] tests/qtest: add a test case for pvpanic-pci Peter Maydell
2021-01-29 15:57   ` Peter Maydell
2021-01-29 17:00     ` Mihai Carabas
2021-01-29 10:59 ` [PULL 22/46] ptimer: Add new ptimer_set_period_from_clock() function Peter Maydell
2021-01-29 10:59 ` [PULL 23/46] clock: Add new clock_has_source() function Peter Maydell
2021-01-29 10:59 ` [PULL 24/46] tests: Add a simple test of the CMSDK APB timer Peter Maydell
2021-01-29 10:59 ` [PULL 25/46] tests: Add a simple test of the CMSDK APB watchdog Peter Maydell
2021-01-29 10:59 ` [PULL 26/46] tests: Add a simple test of the CMSDK APB dual timer Peter Maydell
2021-01-29 10:59 ` [PULL 27/46] hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer Peter Maydell
2021-01-29 10:59 ` [PULL 28/46] hw/timer/cmsdk-apb-timer: Add Clock input Peter Maydell
2021-01-29 10:59 ` [PULL 29/46] hw/timer/cmsdk-apb-dualtimer: " Peter Maydell
2021-01-29 10:59 ` [PULL 30/46] hw/watchdog/cmsdk-apb-watchdog: " Peter Maydell
2021-01-29 10:59 ` [PULL 31/46] hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" Peter Maydell
2021-01-29 10:59 ` [PULL 32/46] hw/arm/armsse: Wire up clocks Peter Maydell
2021-01-29 10:59 ` [PULL 33/46] hw/arm/mps2: Inline CMSDK_APB_TIMER creation Peter Maydell
2021-01-29 11:00 ` [PULL 34/46] hw/arm/mps2: Create and connect SYSCLK Clock Peter Maydell
2021-01-29 11:00 ` [PULL 35/46] hw/arm/mps2-tz: Create and connect ARMSSE Clocks Peter Maydell
2021-01-29 11:00 ` [PULL 36/46] hw/arm/musca: " Peter Maydell
2021-01-29 11:00 ` [PULL 37/46] hw/arm/stellaris: Convert SSYS to QOM device Peter Maydell
2021-01-29 11:00 ` [PULL 38/46] hw/arm/stellaris: Create Clock input for watchdog Peter Maydell
2021-01-29 11:00 ` [PULL 39/46] hw/timer/cmsdk-apb-timer: Convert to use Clock input Peter Maydell
2021-01-29 11:00 ` [PULL 40/46] hw/timer/cmsdk-apb-dualtimer: " Peter Maydell
2021-01-29 11:00 ` [PULL 41/46] hw/watchdog/cmsdk-apb-watchdog: " Peter Maydell
2021-01-29 11:00 ` [PULL 42/46] tests/qtest/cmsdk-apb-watchdog-test: Test clock changes Peter Maydell
2021-01-29 11:00 ` [PULL 43/46] hw/arm/armsse: Use Clock to set system_clock_scale Peter Maydell
2021-01-29 11:00 ` [PULL 44/46] arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE Peter Maydell
2021-01-29 11:00 ` [PULL 45/46] arm: Remove frq " Peter Maydell
2021-01-29 11:00 ` [PULL 46/46] hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Peter Maydell
2021-01-29 11:42 ` [PULL 00/46] target-arm queue no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210129110012.8660-6-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.