All of lore.kernel.org
 help / color / mirror / Atom feed
From: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
To: sre@kernel.org, robh+dt@kernel.org, dmurphy@ti.com,
	pali@kernel.org, krzk@kernel.org, afd@ti.com,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: grygorii.tertychnyi@leica-geosystems.com,
	andrey.zhizhikin@leica-geosystems.com,
	LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Subject: [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100
Date: Tue,  2 Feb 2021 08:48:57 +0000	[thread overview]
Message-ID: <20210202084858.2944-2-Qing-wu.Li@leica-geosystems.com.cn> (raw)
In-Reply-To: <20210202084858.2944-1-Qing-wu.Li@leica-geosystems.com.cn>

Add support for TI BQ78Z100, I2C interface gas gauge.
It provides a fully integrated safety protection,
and authentication for 1 to 2-series cell Li-Ion and
Li-Polymer battery packs.

The patch was tested with BQ78Z100 equipment.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
 drivers/power/supply/bq27xxx_battery.c     | 46 +++++++++++++++++++++-
 drivers/power/supply/bq27xxx_battery_i2c.c |  2 +
 include/linux/power/bq27xxx_battery.h      |  1 +
 3 files changed, 48 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 315e0909e6a4..c8579ec7a4f8 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -39,6 +39,7 @@
  * https://www.ti.com/product/bq27z561
  * https://www.ti.com/product/bq28z610
  * https://www.ti.com/product/bq34z100-g1
+ * https://www.ti.com/product/bq78z100
  */
 
 #include <linux/device.h>
@@ -497,7 +498,27 @@ static u8
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x22,
 		BQ27XXX_DM_REG_ROWS,
-	};
+	},
+	bq78z100_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
+};
 
 static enum power_supply_property bq27000_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
@@ -792,6 +813,27 @@ static enum power_supply_property bq34z100_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq78z100_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
 struct bq27xxx_dm_reg {
 	u8 subclass_id;
 	u8 offset;
@@ -890,6 +932,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 #define bq27z561_dm_regs 0
 #define bq28z610_dm_regs 0
 #define bq34z100_dm_regs 0
+#define bq78z100_dm_regs 0
 
 #define BQ27XXX_O_ZERO		BIT(0)
 #define BQ27XXX_O_OTDC		BIT(1) /* has OTC/OTD overtemperature flags */
@@ -948,6 +991,7 @@ static struct {
 	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
 	[BQ34Z100]  = BQ27XXX_DATA(bq34z100,  0         , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
 							  BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
+	[BQ78Z100]  = BQ27XXX_DATA(bq78z100,  0x00000000, BQ27Z561_O_BITS),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index eb4f4284982f..46f078350fd3 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27z561", BQ27Z561 },
 	{ "bq28z610", BQ28Z610 },
 	{ "bq34z100", BQ34Z100 },
+	{ "bq78z100", BQ78Z100 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27z561" },
 	{ .compatible = "ti,bq28z610" },
 	{ .compatible = "ti,bq34z100" },
+	{ .compatible = "ti,bq78z100" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 111a40d0d3d5..ac17618043b1 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -33,6 +33,7 @@ enum bq27xxx_chip {
 	BQ27Z561,
 	BQ28Z610,
 	BQ34Z100,
+	BQ78Z100,
 };
 
 struct bq27xxx_device_info;
-- 
2.17.1


  reply	other threads:[~2021-02-02  8:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-02  8:48 [PATCH V2 0/2] cover-letter bq27xxx: BQ78Z100: Fix Typo LI Qingwu
2021-02-02  8:48 ` LI Qingwu [this message]
2021-02-02  9:06   ` [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100 Krzysztof Kozlowski
2021-02-02  8:48 ` [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 LI Qingwu
2021-02-02  9:08   ` Krzysztof Kozlowski
2021-02-03  3:49     ` LI Qingwu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210202084858.2944-2-Qing-wu.Li@leica-geosystems.com.cn \
    --to=qing-wu.li@leica-geosystems.com.cn \
    --cc=afd@ti.com \
    --cc=andrey.zhizhikin@leica-geosystems.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=grygorii.tertychnyi@leica-geosystems.com \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=pali@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.