All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [CI 1/3] drm/i915/gt: Move engine setup out of set_default_submission
Date: Wed,  3 Feb 2021 06:53:48 +0000	[thread overview]
Message-ID: <20210203065350.24476-1-chris@chris-wilson.co.uk> (raw)

Now that we no longer switch back and forth between guc and execlists,
we no longer need to restore the backend's vfunc and can leave them set
after initialisation. The only catch is that we lose the submission on
wedging and still need to reset the submit_request vfunc on unwedging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 .../drm/i915/gt/intel_execlists_submission.c  | 46 ++++++++---------
 .../gpu/drm/i915/gt/intel_ring_submission.c   |  4 --
 .../gpu/drm/i915/gt/uc/intel_guc_submission.c | 50 ++++++++-----------
 3 files changed, 44 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_execlists_submission.c b/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
index b8bd3d48b345..c98fdeb94dba 100644
--- a/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
+++ b/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
@@ -3069,29 +3069,6 @@ static void execlists_set_default_submission(struct intel_engine_cs *engine)
 	engine->submit_request = execlists_submit_request;
 	engine->schedule = i915_schedule;
 	engine->execlists.tasklet.callback = execlists_submission_tasklet;
-
-	engine->reset.prepare = execlists_reset_prepare;
-	engine->reset.rewind = execlists_reset_rewind;
-	engine->reset.cancel = execlists_reset_cancel;
-	engine->reset.finish = execlists_reset_finish;
-
-	engine->park = execlists_park;
-	engine->unpark = NULL;
-
-	engine->flags |= I915_ENGINE_SUPPORTS_STATS;
-	if (!intel_vgpu_active(engine->i915)) {
-		engine->flags |= I915_ENGINE_HAS_SEMAPHORES;
-		if (can_preempt(engine)) {
-			engine->flags |= I915_ENGINE_HAS_PREEMPTION;
-			if (IS_ACTIVE(CONFIG_DRM_I915_TIMESLICE_DURATION))
-				engine->flags |= I915_ENGINE_HAS_TIMESLICES;
-		}
-	}
-
-	if (intel_engine_has_preemption(engine))
-		engine->emit_bb_start = gen8_emit_bb_start;
-	else
-		engine->emit_bb_start = gen8_emit_bb_start_noarb;
 }
 
 static void execlists_shutdown(struct intel_engine_cs *engine)
@@ -3122,6 +3099,14 @@ logical_ring_default_vfuncs(struct intel_engine_cs *engine)
 	engine->cops = &execlists_context_ops;
 	engine->request_alloc = execlists_request_alloc;
 
+	engine->reset.prepare = execlists_reset_prepare;
+	engine->reset.rewind = execlists_reset_rewind;
+	engine->reset.cancel = execlists_reset_cancel;
+	engine->reset.finish = execlists_reset_finish;
+
+	engine->park = execlists_park;
+	engine->unpark = NULL;
+
 	engine->emit_flush = gen8_emit_flush_xcs;
 	engine->emit_init_breadcrumb = gen8_emit_init_breadcrumb;
 	engine->emit_fini_breadcrumb = gen8_emit_fini_breadcrumb_xcs;
@@ -3142,6 +3127,21 @@ logical_ring_default_vfuncs(struct intel_engine_cs *engine)
 		 * until a more refined solution exists.
 		 */
 	}
+
+	engine->flags |= I915_ENGINE_SUPPORTS_STATS;
+	if (!intel_vgpu_active(engine->i915)) {
+		engine->flags |= I915_ENGINE_HAS_SEMAPHORES;
+		if (can_preempt(engine)) {
+			engine->flags |= I915_ENGINE_HAS_PREEMPTION;
+			if (IS_ACTIVE(CONFIG_DRM_I915_TIMESLICE_DURATION))
+				engine->flags |= I915_ENGINE_HAS_TIMESLICES;
+		}
+	}
+
+	if (intel_engine_has_preemption(engine))
+		engine->emit_bb_start = gen8_emit_bb_start;
+	else
+		engine->emit_bb_start = gen8_emit_bb_start_noarb;
 }
 
 static void logical_ring_default_irqs(struct intel_engine_cs *engine)
diff --git a/drivers/gpu/drm/i915/gt/intel_ring_submission.c b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
index 9c2c605d7a92..3cb2ce503544 100644
--- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
@@ -969,14 +969,10 @@ static void gen6_bsd_submit_request(struct i915_request *request)
 static void i9xx_set_default_submission(struct intel_engine_cs *engine)
 {
 	engine->submit_request = i9xx_submit_request;
-
-	engine->park = NULL;
-	engine->unpark = NULL;
 }
 
 static void gen6_bsd_set_default_submission(struct intel_engine_cs *engine)
 {
-	i9xx_set_default_submission(engine);
 	engine->submit_request = gen6_bsd_submit_request;
 }
 
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
index 92688a9b6717..f72faa0b8339 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -608,35 +608,6 @@ static int guc_resume(struct intel_engine_cs *engine)
 static void guc_set_default_submission(struct intel_engine_cs *engine)
 {
 	engine->submit_request = guc_submit_request;
-	engine->schedule = i915_schedule;
-	engine->execlists.tasklet.callback = guc_submission_tasklet;
-
-	engine->reset.prepare = guc_reset_prepare;
-	engine->reset.rewind = guc_reset_rewind;
-	engine->reset.cancel = guc_reset_cancel;
-	engine->reset.finish = guc_reset_finish;
-
-	engine->flags |= I915_ENGINE_NEEDS_BREADCRUMB_TASKLET;
-	engine->flags |= I915_ENGINE_HAS_PREEMPTION;
-
-	/*
-	 * TODO: GuC supports timeslicing and semaphores as well, but they're
-	 * handled by the firmware so some minor tweaks are required before
-	 * enabling.
-	 *
-	 * engine->flags |= I915_ENGINE_HAS_TIMESLICES;
-	 * engine->flags |= I915_ENGINE_HAS_SEMAPHORES;
-	 */
-
-	engine->emit_bb_start = gen8_emit_bb_start;
-
-	/*
-	 * For the breadcrumb irq to work we need the interrupts to stay
-	 * enabled. However, on all platforms on which we'll have support for
-	 * GuC submission we don't allow disabling the interrupts at runtime, so
-	 * we're always safe with the current flow.
-	 */
-	GEM_BUG_ON(engine->irq_enable || engine->irq_disable);
 }
 
 static void guc_release(struct intel_engine_cs *engine)
@@ -658,6 +629,13 @@ static void guc_default_vfuncs(struct intel_engine_cs *engine)
 	engine->cops = &guc_context_ops;
 	engine->request_alloc = guc_request_alloc;
 
+	engine->schedule = i915_schedule;
+
+	engine->reset.prepare = guc_reset_prepare;
+	engine->reset.rewind = guc_reset_rewind;
+	engine->reset.cancel = guc_reset_cancel;
+	engine->reset.finish = guc_reset_finish;
+
 	engine->emit_flush = gen8_emit_flush_xcs;
 	engine->emit_init_breadcrumb = gen8_emit_init_breadcrumb;
 	engine->emit_fini_breadcrumb = gen8_emit_fini_breadcrumb_xcs;
@@ -666,6 +644,20 @@ static void guc_default_vfuncs(struct intel_engine_cs *engine)
 		engine->emit_flush = gen12_emit_flush_xcs;
 	}
 	engine->set_default_submission = guc_set_default_submission;
+
+	engine->flags |= I915_ENGINE_NEEDS_BREADCRUMB_TASKLET;
+	engine->flags |= I915_ENGINE_HAS_PREEMPTION;
+
+	/*
+	 * TODO: GuC supports timeslicing and semaphores as well, but they're
+	 * handled by the firmware so some minor tweaks are required before
+	 * enabling.
+	 *
+	 * engine->flags |= I915_ENGINE_HAS_TIMESLICES;
+	 * engine->flags |= I915_ENGINE_HAS_SEMAPHORES;
+	 */
+
+	engine->emit_bb_start = gen8_emit_bb_start;
 }
 
 static void rcs_submission_override(struct intel_engine_cs *engine)
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2021-02-03  6:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03  6:53 Chris Wilson [this message]
2021-02-03  6:53 ` [Intel-gfx] [CI 2/3] drm/i915/gt: Move submission_method into intel_gt Chris Wilson
2021-02-03  6:53 ` [Intel-gfx] [CI 3/3] drm/i915/gt: Move CS interrupt handler to the backend Chris Wilson
2021-02-03  8:11   ` [Intel-gfx] [PATCH] " Chris Wilson
2021-02-03  8:04 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [CI,1/3] drm/i915/gt: Move engine setup out of set_default_submission Patchwork
2021-02-03  9:40 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [CI,1/3] drm/i915/gt: Move engine setup out of set_default_submission (rev2) Patchwork
2021-02-03 11:20 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210203065350.24476-1-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    --subject='Re: [Intel-gfx] [CI 1/3] drm/i915/gt: Move engine setup out of set_default_submission' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.