All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] arm64: rk3399: Add support NanoPi R4s
@ 2021-02-08  8:02 xiaobo
  0 siblings, 0 replies; 6+ messages in thread
From: xiaobo @ 2021-02-08  8:02 UTC (permalink / raw)
  To: u-boot

From: Xiaobo Tian <peterwillcn@gmail.com>

NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
port.It also has two GPIO headers which allows further peripherals to be used.

The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].

[1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6

Signed-off-by: xiaobo <peterwillcn@gmail.com>
---
 arch/arm/dts/Makefile                      |   1 +
 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi |  17 +++
 arch/arm/dts/rk3399-nanopi-r4s.dts         | 138 +++++++++++++++++++++
 board/rockchip/evb_rk3399/MAINTAINERS      |   6 +
 configs/nanopi-r4s-rk3399_defconfig        |  62 +++++++++
 5 files changed, 224 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts
 create mode 100644 configs/nanopi-r4s-rk3399_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 858b79ac97..528dfe069e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -92,6 +92,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
 	rk3288-evb.dtb \
 	rk3288-firefly.dtb \
 	rk3288-miqi.dtb \
+	rk3399-nanopi-r4s.dtb \
 	rk3288-phycore-rdk.dtb \
 	rk3288-popmetal.dtb \
 	rk3288-rock2-square.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
new file mode 100644
index 0000000000..3f97867cc5
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+#include "rk3399-sdram-ddr3-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
new file mode 100644
index 0000000000..6f2cf17bf1
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R4S";
+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+	aliases {
+		ethernet1 = &r8169;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vdd_5v>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "disabled";
+};
+
+&fusb0 {
+	status = "disabled";
+};
+
+&leds {
+	lan_led: led-1 {
+		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:lan";
+	};
+
+	wan_led: led-2 {
+		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:wan";
+	};
+};
+
+&leds_gpio {
+	rockchip,pins =
+		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&pcie0 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+
+	pcie at 0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		r8169: pcie at 0,0 {
+			reg = <0x000000 0 0 0 0>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&sdhci {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	host-index-min = <1>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 4c889e06a6..3b9d60eccd 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -55,6 +55,12 @@ S:	Maintained
 F:	configs/nanopi-neo4-rk3399_defconfig
 F:	arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
 
+NANOPI-R4S
+M:	Xiaobo Tian <peterwillcn@gmail.com>
+S:	Maintained
+F:	configs/nanopi-r4s-rk3399_defconfig
+F:	arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
+
 ORANGEPI-RK3399
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
new file mode 100644
index 0000000000..0a3c28b012
--- /dev/null
+++ b/configs/nanopi-r4s-rk3399_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
-- 
2.30.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH] arm64: rk3399: Add support NanoPi R4s
@ 2021-02-27 14:39 xiaobo
  0 siblings, 0 replies; 6+ messages in thread
From: xiaobo @ 2021-02-27 14:39 UTC (permalink / raw)
  To: u-boot

From: Xiaobo Tian <peterwillcn@gmail.com>

NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
port.It also has two GPIO headers which allows further peripherals to be used.

The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].

[1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6

Signed-off-by: xiaobo <peterwillcn@gmail.com>
---
 arch/arm/dts/Makefile                      |   1 +
 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi |  16 +++
 arch/arm/dts/rk3399-nanopi-r4s.dts         | 138 +++++++++++++++++++++
 board/rockchip/evb_rk3399/MAINTAINERS      |   6 +
 configs/nanopi-r4s-rk3399_defconfig        |  62 +++++++++
 5 files changed, 223 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts
 create mode 100644 configs/nanopi-r4s-rk3399_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 33e483f4fb..008dfc0de0 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -132,6 +132,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-nanopi-m4.dtb \
 	rk3399-nanopi-m4-2gb.dtb \
 	rk3399-nanopi-neo4.dtb \
+	rk3399-nanopi-r4s.dtb \
 	rk3399-orangepi.dtb \
 	rk3399-pinebook-pro.dtb \
 	rk3399-puma-haikou.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
new file mode 100644
index 0000000000..cd1642527b
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
new file mode 100644
index 0000000000..6f2cf17bf1
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R4S";
+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+	aliases {
+		ethernet1 = &r8169;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vdd_5v>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "disabled";
+};
+
+&fusb0 {
+	status = "disabled";
+};
+
+&leds {
+	lan_led: led-1 {
+		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:lan";
+	};
+
+	wan_led: led-2 {
+		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:wan";
+	};
+};
+
+&leds_gpio {
+	rockchip,pins =
+		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&pcie0 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+
+	pcie at 0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		r8169: pcie at 0,0 {
+			reg = <0x000000 0 0 0 0>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&sdhci {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	host-index-min = <1>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 4c889e06a6..3b9d60eccd 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -55,6 +55,12 @@ S:	Maintained
 F:	configs/nanopi-neo4-rk3399_defconfig
 F:	arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
 
+NANOPI-R4S
+M:	Xiaobo Tian <peterwillcn@gmail.com>
+S:	Maintained
+F:	configs/nanopi-r4s-rk3399_defconfig
+F:	arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
+
 ORANGEPI-RK3399
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
new file mode 100644
index 0000000000..0a3c28b012
--- /dev/null
+++ b/configs/nanopi-r4s-rk3399_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
-- 
2.30.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH] arm64: rk3399: Add support NanoPi R4s
  2021-02-26 20:37 ` Patrick Wildt
@ 2021-02-26 20:54   ` Patrick Wildt
  0 siblings, 0 replies; 6+ messages in thread
From: Patrick Wildt @ 2021-02-26 20:54 UTC (permalink / raw)
  To: u-boot

Am Fri, Feb 26, 2021 at 09:37:58PM +0100 schrieb Patrick Wildt:
> Am Mon, Feb 08, 2021 at 04:56:35PM +0800 schrieb xiaobo:
> > From: Xiaobo Tian <peterwillcn@gmail.com>
> > 
> > NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
> > dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
> > including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
> > port.It also has two GPIO headers which allows further peripherals to be used.
> > 
> > The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].
> > 
> > [1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6
> > 
> > Signed-off-by: xiaobo <peterwillcn@gmail.com>
> > ---
> >  arch/arm/dts/Makefile                      |   1 +
> >  arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi |  17 +++
> >  arch/arm/dts/rk3399-nanopi-r4s.dts         | 138 +++++++++++++++++++++
> >  board/rockchip/evb_rk3399/MAINTAINERS      |   6 +
> >  configs/nanopi-r4s-rk3399_defconfig        |  62 +++++++++
> >  5 files changed, 224 insertions(+)
> >  create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
> >  create mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts
> >  create mode 100644 configs/nanopi-r4s-rk3399_defconfig
> > 
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 858b79ac97..528dfe069e 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -92,6 +92,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
> >  	rk3288-evb.dtb \
> >  	rk3288-firefly.dtb \
> >  	rk3288-miqi.dtb \
> > +	rk3399-nanopi-r4s.dtb \
> 
> This is in the wrong list.  You need to put it into the RK3399 list, not
> RK3288.
> 
> >  	rk3288-phycore-rdk.dtb \
> >  	rk3288-popmetal.dtb \
> >  	rk3288-rock2-square.dtb \
> > diff --git a/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
> > new file mode 100644
> > index 0000000000..3f97867cc5
> > --- /dev/null
> > +++ b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
> > @@ -0,0 +1,17 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * RK3399-based FriendlyElec boards device tree source
> > + *
> > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> > + *
> > + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> > + * (http://www.friendlyarm.com)
> > + *
> > + * Copyright (c) 2018 Collabora Ltd.
> > + * Copyright (c) 2019 Arm Ltd.
> > + * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
> > + */
> > +
> > +#include "rk3399-nanopi4-u-boot.dtsi"
> > +#include "rk3399-sdram-lpddr4-100.dtsi"
> > +#include "rk3399-sdram-ddr3-1866.dtsi"
> 
> This is wrong as well.  I think there can only be lpddr4 *or* ddr3.  I
> think the last one has precedence.  I have a 4G machine, and it doesn't
> work with this.  If I remove the ddr3 (since 4G machine has lpddr4),
> it works.
> 
> > diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
> > new file mode 100644
> > index 0000000000..6f2cf17bf1
> > --- /dev/null
> > +++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
> > @@ -0,0 +1,138 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> > + *
> > + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> > + * (http://www.friendlyarm.com)
> > + *
> > + * Copyright (c) 2018 Collabora Ltd.
> > + * Copyright (c) 2019 Arm Ltd.
> > + * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3399-nanopi4.dtsi"
> > +
> > +/ {
> > +	model = "FriendlyElec NanoPi R4S";
> > +	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
> > +
> > +	aliases {
> > +		ethernet1 = &r8169;
> > +	};
> > +
> > +	vdd_5v: vdd-5v {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vdd_5v";
> > +		regulator-always-on;
> > +		regulator-boot-on;
> > +	};
> > +
> > +	fan: pwm-fan {
> > +		compatible = "pwm-fan";
> > +		cooling-levels = <0 12 18 255>;
> > +		#cooling-cells = <2>;
> > +		fan-supply = <&vdd_5v>;
> > +		pwms = <&pwm1 0 50000 0>;
> > +	};
> > +};
> > +
> > +&cpu_thermal {
> > +	trips {
> > +		cpu_warm: cpu_warm {
> > +			temperature = <55000>;
> > +			hysteresis = <2000>;
> > +			type = "active";
> > +		};
> > +
> > +		cpu_hot: cpu_hot {
> > +			temperature = <65000>;
> > +			hysteresis = <2000>;
> > +			type = "active";
> > +		};
> > +	};
> > +
> > +	cooling-maps {
> > +		map2 {
> > +			trip = <&cpu_warm>;
> > +			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> > +		};
> > +
> > +		map3 {
> > +			trip = <&cpu_hot>;
> > +			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> > +		};
> > +	};
> > +};
> > +
> > +&emmc_phy {
> > +	status = "disabled";
> > +};
> > +
> > +&fusb0 {
> > +	status = "disabled";
> > +};
> > +
> > +&leds {
> > +	lan_led: led-1 {
> > +		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> > +		label = "nanopi-r4s:green:lan";
> > +	};
> > +
> > +	wan_led: led-2 {
> > +		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> > +		label = "nanopi-r4s:green:wan";
> > +	};
> > +};
> > +
> > +&leds_gpio {
> > +	rockchip,pins =
> > +		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
> > +		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
> > +		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> > +};
> > +
> > +&pcie0 {
> > +	max-link-speed = <1>;
> > +	num-lanes = <1>;
> > +	vpcie3v3-supply = <&vcc3v3_sys>;
> > +
> > +	pcie at 0 {
> > +		reg = <0x00000000 0 0 0 0>;
> > +		#address-cells = <3>;
> > +		#size-cells = <2>;
> > +
> > +		r8169: pcie at 0,0 {
> > +			reg = <0x000000 0 0 0 0>;
> > +			local-mac-address = [ 00 00 00 00 00 00 ];
> > +		};
> > +	};
> > +};
> > +
> > +&sdhci {
> > +	status = "disabled";
> > +};
> > +
> > +&sdio0 {
> > +	status = "disabled";
> > +};
> > +
> > +&sdmmc {
> > +	host-index-min = <1>;

Also I can't find any user of this property.

> > +};
> > +
> > +&u2phy0_host {
> > +	phy-supply = <&vdd_5v>;
> > +};
> > +
> > +&u2phy1_host {
> > +	status = "disabled";
> > +};
> > +
> > +&usbdrd_dwc3_0 {
> > +	dr_mode = "host";
> > +};
> > +
> > +&vcc3v3_sys {
> > +	vin-supply = <&vcc5v0_sys>;
> > +};
> > diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> > index 4c889e06a6..3b9d60eccd 100644
> > --- a/board/rockchip/evb_rk3399/MAINTAINERS
> > +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> > @@ -55,6 +55,12 @@ S:	Maintained
> >  F:	configs/nanopi-neo4-rk3399_defconfig
> >  F:	arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
> >  
> > +NANOPI-R4S
> > +M:	Xiaobo Tian <peterwillcn@gmail.com>
> > +S:	Maintained
> > +F:	configs/nanopi-r4s-rk3399_defconfig
> > +F:	arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
> > +
> >  ORANGEPI-RK3399
> >  M:	Jagan Teki <jagan@amarulasolutions.com>
> >  S:	Maintained
> > diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
> > new file mode 100644
> > index 0000000000..0a3c28b012
> > --- /dev/null
> > +++ b/configs/nanopi-r4s-rk3399_defconfig
> > @@ -0,0 +1,62 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_ROCKCHIP=y
> > +CONFIG_SYS_TEXT_BASE=0x00200000
> > +CONFIG_ENV_OFFSET=0x3F8000
> > +CONFIG_ROCKCHIP_RK3399=y
> > +CONFIG_TARGET_EVB_RK3399=y
> > +CONFIG_NR_DRAM_BANKS=1
> > +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> > +CONFIG_DEBUG_UART_CLOCK=24000000
> > +CONFIG_DEBUG_UART=y
> > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
> > +CONFIG_DISPLAY_BOARDINFO_LATE=y
> > +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> > +CONFIG_SPL_STACK_R=y
> > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
> > +CONFIG_TPL=y
> > +CONFIG_CMD_BOOTZ=y
> > +CONFIG_CMD_GPT=y
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_USB=y
> > +# CONFIG_CMD_SETEXPR is not set
> > +CONFIG_CMD_TIME=y
> > +CONFIG_SPL_OF_CONTROL=y
> > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
> > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> > +CONFIG_ENV_IS_IN_MMC=y
> > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> > +CONFIG_ROCKCHIP_GPIO=y
> > +CONFIG_SYS_I2C_ROCKCHIP=y
> > +CONFIG_MMC_DW=y
> > +CONFIG_MMC_DW_ROCKCHIP=y
> > +CONFIG_MMC_SDHCI=y
> > +CONFIG_MMC_SDHCI_ROCKCHIP=y
> > +CONFIG_DM_ETH=y
> > +CONFIG_ETH_DESIGNWARE=y
> > +CONFIG_GMAC_ROCKCHIP=y
> > +CONFIG_PMIC_RK8XX=y
> > +CONFIG_REGULATOR_PWM=y
> > +CONFIG_REGULATOR_RK8XX=y
> > +CONFIG_PWM_ROCKCHIP=y
> > +CONFIG_RAM_RK3399_LPDDR4=y
> > +CONFIG_BAUDRATE=1500000
> > +CONFIG_DEBUG_UART_SHIFT=2
> > +CONFIG_SYSRESET=y
> > +CONFIG_USB=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_DWC3=y
> > +CONFIG_USB_EHCI_HCD=y
> > +CONFIG_USB_EHCI_GENERIC=y
> > +CONFIG_USB_KEYBOARD=y
> > +CONFIG_USB_HOST_ETHER=y
> > +CONFIG_USB_ETHER_ASIX=y
> > +CONFIG_USB_ETHER_ASIX88179=y
> > +CONFIG_USB_ETHER_MCS7830=y
> > +CONFIG_USB_ETHER_RTL8152=y
> > +CONFIG_USB_ETHER_SMSC95XX=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > +CONFIG_SPL_TINY_MEMSET=y
> > +CONFIG_ERRNO_STR=y
> > -- 
> > 2.30.0
> > 

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] arm64: rk3399: Add support NanoPi R4s
  2021-02-08  8:56 xiaobo
@ 2021-02-26 20:37 ` Patrick Wildt
  2021-02-26 20:54   ` Patrick Wildt
  0 siblings, 1 reply; 6+ messages in thread
From: Patrick Wildt @ 2021-02-26 20:37 UTC (permalink / raw)
  To: u-boot

Am Mon, Feb 08, 2021 at 04:56:35PM +0800 schrieb xiaobo:
> From: Xiaobo Tian <peterwillcn@gmail.com>
> 
> NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
> dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
> including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
> port.It also has two GPIO headers which allows further peripherals to be used.
> 
> The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].
> 
> [1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6
> 
> Signed-off-by: xiaobo <peterwillcn@gmail.com>
> ---
>  arch/arm/dts/Makefile                      |   1 +
>  arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi |  17 +++
>  arch/arm/dts/rk3399-nanopi-r4s.dts         | 138 +++++++++++++++++++++
>  board/rockchip/evb_rk3399/MAINTAINERS      |   6 +
>  configs/nanopi-r4s-rk3399_defconfig        |  62 +++++++++
>  5 files changed, 224 insertions(+)
>  create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts
>  create mode 100644 configs/nanopi-r4s-rk3399_defconfig
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 858b79ac97..528dfe069e 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -92,6 +92,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
>  	rk3288-evb.dtb \
>  	rk3288-firefly.dtb \
>  	rk3288-miqi.dtb \
> +	rk3399-nanopi-r4s.dtb \

This is in the wrong list.  You need to put it into the RK3399 list, not
RK3288.

>  	rk3288-phycore-rdk.dtb \
>  	rk3288-popmetal.dtb \
>  	rk3288-rock2-square.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
> new file mode 100644
> index 0000000000..3f97867cc5
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * RK3399-based FriendlyElec boards device tree source
> + *
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
> + */
> +
> +#include "rk3399-nanopi4-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr4-100.dtsi"
> +#include "rk3399-sdram-ddr3-1866.dtsi"

This is wrong as well.  I think there can only be lpddr4 *or* ddr3.  I
think the last one has precedence.  I have a 4G machine, and it doesn't
work with this.  If I remove the ddr3 (since 4G machine has lpddr4),
it works.

> diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
> new file mode 100644
> index 0000000000..6f2cf17bf1
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> +	model = "FriendlyElec NanoPi R4S";
> +	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
> +
> +	aliases {
> +		ethernet1 = &r8169;
> +	};
> +
> +	vdd_5v: vdd-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_5v";
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +
> +	fan: pwm-fan {
> +		compatible = "pwm-fan";
> +		cooling-levels = <0 12 18 255>;
> +		#cooling-cells = <2>;
> +		fan-supply = <&vdd_5v>;
> +		pwms = <&pwm1 0 50000 0>;
> +	};
> +};
> +
> +&cpu_thermal {
> +	trips {
> +		cpu_warm: cpu_warm {
> +			temperature = <55000>;
> +			hysteresis = <2000>;
> +			type = "active";
> +		};
> +
> +		cpu_hot: cpu_hot {
> +			temperature = <65000>;
> +			hysteresis = <2000>;
> +			type = "active";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map2 {
> +			trip = <&cpu_warm>;
> +			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> +		};
> +
> +		map3 {
> +			trip = <&cpu_hot>;
> +			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> +		};
> +	};
> +};
> +
> +&emmc_phy {
> +	status = "disabled";
> +};
> +
> +&fusb0 {
> +	status = "disabled";
> +};
> +
> +&leds {
> +	lan_led: led-1 {
> +		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> +		label = "nanopi-r4s:green:lan";
> +	};
> +
> +	wan_led: led-2 {
> +		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> +		label = "nanopi-r4s:green:wan";
> +	};
> +};
> +
> +&leds_gpio {
> +	rockchip,pins =
> +		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
> +		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
> +		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> +};
> +
> +&pcie0 {
> +	max-link-speed = <1>;
> +	num-lanes = <1>;
> +	vpcie3v3-supply = <&vcc3v3_sys>;
> +
> +	pcie at 0 {
> +		reg = <0x00000000 0 0 0 0>;
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +
> +		r8169: pcie at 0,0 {
> +			reg = <0x000000 0 0 0 0>;
> +			local-mac-address = [ 00 00 00 00 00 00 ];
> +		};
> +	};
> +};
> +
> +&sdhci {
> +	status = "disabled";
> +};
> +
> +&sdio0 {
> +	status = "disabled";
> +};
> +
> +&sdmmc {
> +	host-index-min = <1>;
> +};
> +
> +&u2phy0_host {
> +	phy-supply = <&vdd_5v>;
> +};
> +
> +&u2phy1_host {
> +	status = "disabled";
> +};
> +
> +&usbdrd_dwc3_0 {
> +	dr_mode = "host";
> +};
> +
> +&vcc3v3_sys {
> +	vin-supply = <&vcc5v0_sys>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index 4c889e06a6..3b9d60eccd 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -55,6 +55,12 @@ S:	Maintained
>  F:	configs/nanopi-neo4-rk3399_defconfig
>  F:	arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
>  
> +NANOPI-R4S
> +M:	Xiaobo Tian <peterwillcn@gmail.com>
> +S:	Maintained
> +F:	configs/nanopi-r4s-rk3399_defconfig
> +F:	arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
> +
>  ORANGEPI-RK3399
>  M:	Jagan Teki <jagan@amarulasolutions.com>
>  S:	Maintained
> diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
> new file mode 100644
> index 0000000000..0a3c28b012
> --- /dev/null
> +++ b/configs/nanopi-r4s-rk3399_defconfig
> @@ -0,0 +1,62 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ENV_OFFSET=0x3F8000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_TARGET_EVB_RK3399=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
> +CONFIG_TPL=y
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM_RK3399_LPDDR4=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
> -- 
> 2.30.0
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] arm64: rk3399: Add support NanoPi R4s
@ 2021-02-08  8:56 xiaobo
  2021-02-26 20:37 ` Patrick Wildt
  0 siblings, 1 reply; 6+ messages in thread
From: xiaobo @ 2021-02-08  8:56 UTC (permalink / raw)
  To: u-boot

From: Xiaobo Tian <peterwillcn@gmail.com>

NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
port.It also has two GPIO headers which allows further peripherals to be used.

The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].

[1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6

Signed-off-by: xiaobo <peterwillcn@gmail.com>
---
 arch/arm/dts/Makefile                      |   1 +
 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi |  17 +++
 arch/arm/dts/rk3399-nanopi-r4s.dts         | 138 +++++++++++++++++++++
 board/rockchip/evb_rk3399/MAINTAINERS      |   6 +
 configs/nanopi-r4s-rk3399_defconfig        |  62 +++++++++
 5 files changed, 224 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts
 create mode 100644 configs/nanopi-r4s-rk3399_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 858b79ac97..528dfe069e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -92,6 +92,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
 	rk3288-evb.dtb \
 	rk3288-firefly.dtb \
 	rk3288-miqi.dtb \
+	rk3399-nanopi-r4s.dtb \
 	rk3288-phycore-rdk.dtb \
 	rk3288-popmetal.dtb \
 	rk3288-rock2-square.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
new file mode 100644
index 0000000000..3f97867cc5
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+#include "rk3399-sdram-ddr3-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
new file mode 100644
index 0000000000..6f2cf17bf1
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R4S";
+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+	aliases {
+		ethernet1 = &r8169;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vdd_5v>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "disabled";
+};
+
+&fusb0 {
+	status = "disabled";
+};
+
+&leds {
+	lan_led: led-1 {
+		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:lan";
+	};
+
+	wan_led: led-2 {
+		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:wan";
+	};
+};
+
+&leds_gpio {
+	rockchip,pins =
+		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&pcie0 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+
+	pcie at 0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		r8169: pcie at 0,0 {
+			reg = <0x000000 0 0 0 0>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&sdhci {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	host-index-min = <1>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 4c889e06a6..3b9d60eccd 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -55,6 +55,12 @@ S:	Maintained
 F:	configs/nanopi-neo4-rk3399_defconfig
 F:	arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
 
+NANOPI-R4S
+M:	Xiaobo Tian <peterwillcn@gmail.com>
+S:	Maintained
+F:	configs/nanopi-r4s-rk3399_defconfig
+F:	arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
+
 ORANGEPI-RK3399
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
new file mode 100644
index 0000000000..0a3c28b012
--- /dev/null
+++ b/configs/nanopi-r4s-rk3399_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
-- 
2.30.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH] arm64: rk3399: Add support NanoPi R4s
@ 2021-02-08  8:04 xiaobo
  0 siblings, 0 replies; 6+ messages in thread
From: xiaobo @ 2021-02-08  8:04 UTC (permalink / raw)
  To: u-boot

From: Xiaobo Tian <peterwillcn@gmail.com>

NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
dual-Core Cortex-A72 and Mali-T864 GPU with 4GiB(LPDDR4) of RAM, SD card support,
including 2 gigabit ethernet(RTL8211E 1Gbps - RTL8111H 1Gbps) and 2 USB 3.0 port.
port.It also has two GPIO headers which allows further peripherals to be used.

The devicetree file is taken of the rk3399 nanopi4 Linux kernel [1].

[1] https://github.com/torvalds/linux/commit/e7a095908227fb3ccc86d001d9e13c9ae2bef8e6

Signed-off-by: xiaobo <peterwillcn@gmail.com>
---
 arch/arm/dts/Makefile                      |   1 +
 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi |  17 +++
 arch/arm/dts/rk3399-nanopi-r4s.dts         | 138 +++++++++++++++++++++
 board/rockchip/evb_rk3399/MAINTAINERS      |   6 +
 configs/nanopi-r4s-rk3399_defconfig        |  62 +++++++++
 5 files changed, 224 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-nanopi-r4s.dts
 create mode 100644 configs/nanopi-r4s-rk3399_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 858b79ac97..528dfe069e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -92,6 +92,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
 	rk3288-evb.dtb \
 	rk3288-firefly.dtb \
 	rk3288-miqi.dtb \
+	rk3399-nanopi-r4s.dtb \
 	rk3288-phycore-rdk.dtb \
 	rk3288-popmetal.dtb \
 	rk3288-rock2-square.dtb \
diff --git a/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
new file mode 100644
index 0000000000..3f97867cc5
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+#include "rk3399-sdram-ddr3-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
new file mode 100644
index 0000000000..6f2cf17bf1
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ * Copyright (C) 2020 Xiaobo <peterwillcn@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R4S";
+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+	aliases {
+		ethernet1 = &r8169;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vdd_5v>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "disabled";
+};
+
+&fusb0 {
+	status = "disabled";
+};
+
+&leds {
+	lan_led: led-1 {
+		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:lan";
+	};
+
+	wan_led: led-2 {
+		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		label = "nanopi-r4s:green:wan";
+	};
+};
+
+&leds_gpio {
+	rockchip,pins =
+		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&pcie0 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+
+	pcie at 0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		r8169: pcie at 0,0 {
+			reg = <0x000000 0 0 0 0>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&sdhci {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&sdmmc {
+	host-index-min = <1>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index 4c889e06a6..3b9d60eccd 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -55,6 +55,12 @@ S:	Maintained
 F:	configs/nanopi-neo4-rk3399_defconfig
 F:	arch/arm/dts/rk3399-nanopi-neo4-u-boot.dtsi
 
+NANOPI-R4S
+M:	Xiaobo Tian <peterwillcn@gmail.com>
+S:	Maintained
+F:	configs/nanopi-r4s-rk3399_defconfig
+F:	arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
+
 ORANGEPI-RK3399
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
diff --git a/configs/nanopi-r4s-rk3399_defconfig b/configs/nanopi-r4s-rk3399_defconfig
new file mode 100644
index 0000000000..0a3c28b012
--- /dev/null
+++ b/configs/nanopi-r4s-rk3399_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_TPL=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
-- 
2.30.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-02-27 14:39 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-08  8:02 [PATCH] arm64: rk3399: Add support NanoPi R4s xiaobo
2021-02-08  8:04 xiaobo
2021-02-08  8:56 xiaobo
2021-02-26 20:37 ` Patrick Wildt
2021-02-26 20:54   ` Patrick Wildt
2021-02-27 14:39 xiaobo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.