[PATCH AUTOSEL 5.10 01/36] soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1

[PATCH AUTOSEL 5.10 01/36] soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 7078a5ba7a58e5db07583b176f8a03e0b8714731 ]

We have rst_map_012 used for various accelerators like dsp, ipu and iva.
For these use cases, we have rstctrl bit 2 control the subsystem module
reset, and have and bits 0 and 1 control the accelerator specific
features.

If the bootloader, or kexec boot, has left any accelerator specific
reset bits deasserted, deasserting bit 2 reset will potentially enable
an accelerator with unconfigured MMU and no firmware. And we may get
spammed with a lot by warnings on boot with "Data Access in User mode
during Functional access", or depending on the accelerator, the system
can also just hang.

This issue can be quite easily reproduced by setting a rst_map_012 type
rstctrl register to 0 or 4 in the bootloader, and booting the system.

Let's just assert all reset bits for rst_map_012 type resets. So far
it looks like the other rstctrl types don't need this. If it turns out
that the other type rstctrl bits also need reset on init, we need to
add an instance specific reset mask for the bits to avoid resetting
unwanted bits.

Reported-by: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Suman Anna <s-anna@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Tested-by: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/ti/omap_prm.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 4d41dc3cdce1f..c8b14b3a171f7 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -552,6 +552,7 @@ static int omap_prm_reset_init(struct platform_device *pdev,
 	const struct omap_rst_map *map;
 	struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	char buf[32];
+	u32 v;
 
 	/*
 	 * Check if we have controllable resets. If either rstctrl is non-zero
@@ -599,6 +600,16 @@ static int omap_prm_reset_init(struct platform_device *pdev,
 		map++;
 	}
 
+	/* Quirk handling to assert rst_map_012 bits on reset and avoid errors */
+	if (prm->data->rstmap == rst_map_012) {
+		v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+		if ((v & reset->mask) != reset->mask) {
+			dev_dbg(&pdev->dev, "Asserting all resets: %08x\n", v);
+			writel_relaxed(reset->mask, reset->prm->base +
+				       reset->prm->data->rstctrl);
+		}
+	}
+
 	return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
 }
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 01/36] soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 7078a5ba7a58e5db07583b176f8a03e0b8714731 ]

We have rst_map_012 used for various accelerators like dsp, ipu and iva.
For these use cases, we have rstctrl bit 2 control the subsystem module
reset, and have and bits 0 and 1 control the accelerator specific
features.

If the bootloader, or kexec boot, has left any accelerator specific
reset bits deasserted, deasserting bit 2 reset will potentially enable
an accelerator with unconfigured MMU and no firmware. And we may get
spammed with a lot by warnings on boot with "Data Access in User mode
during Functional access", or depending on the accelerator, the system
can also just hang.

This issue can be quite easily reproduced by setting a rst_map_012 type
rstctrl register to 0 or 4 in the bootloader, and booting the system.

Let's just assert all reset bits for rst_map_012 type resets. So far
it looks like the other rstctrl types don't need this. If it turns out
that the other type rstctrl bits also need reset on init, we need to
add an instance specific reset mask for the bits to avoid resetting
unwanted bits.

Reported-by: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Suman Anna <s-anna@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Tested-by: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/ti/omap_prm.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
index 4d41dc3cdce1f..c8b14b3a171f7 100644
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -552,6 +552,7 @@ static int omap_prm_reset_init(struct platform_device *pdev,
 	const struct omap_rst_map *map;
 	struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	char buf[32];
+	u32 v;
 
 	/*
 	 * Check if we have controllable resets. If either rstctrl is non-zero
@@ -599,6 +600,16 @@ static int omap_prm_reset_init(struct platform_device *pdev,
 		map++;
 	}
 
+	/* Quirk handling to assert rst_map_012 bits on reset and avoid errors */
+	if (prm->data->rstmap == rst_map_012) {
+		v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+		if ((v & reset->mask) != reset->mask) {
+			dev_dbg(&pdev->dev, "Asserting all resets: %08x\n", v);
+			writel_relaxed(reset->mask, reset->prm->base +
+				       reset->prm->data->rstctrl);
+		}
+	}
+
 	return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
 }
 
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 02/36] arm64: dts: rockchip: Fix PCIe DT properties on rk3399

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 43f20b1c6140896916f4e91aacc166830a7ba849 ]

It recently became apparent that the lack of a 'device_type = "pci"'
in the PCIe root complex node for rk3399 is a violation of the PCI
binding, as documented in IEEE Std 1275-1994. Changes to the kernel's
parsing of the DT made such violation fatal, as drivers cannot
probe the controller anymore.

Add the missing property makes the PCIe node compliant. While we
are at it, drop the pointless linux,pci-domain property, which only
makes sense when there are multiple host bridges.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200815125112.462652-3-maz@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 7a9a7aca86c6a..5df535ad4bbc3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -234,6 +234,7 @@ pcie0: pcie@f8000000 {
 		reg = <0x0 0xf8000000 0x0 0x2000000>,
 		      <0x0 0xfd000000 0x0 0x1000000>;
 		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
@@ -252,7 +253,6 @@ pcie0: pcie@f8000000 {
 				<0 0 0 2 &pcie0_intc 1>,
 				<0 0 0 3 &pcie0_intc 2>,
 				<0 0 0 4 &pcie0_intc 3>;
-		linux,pci-domain = <0>;
 		max-link-speed = <1>;
 		msi-map = <0x0 &its 0x0 0x1000>;
 		phys = <&pcie_phy 0>, <&pcie_phy 1>,
-- 
2.27.0

[PATCH AUTOSEL 5.10 02/36] arm64: dts: rockchip: Fix PCIe DT properties on rk3399

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 43f20b1c6140896916f4e91aacc166830a7ba849 ]

It recently became apparent that the lack of a 'device_type = "pci"'
in the PCIe root complex node for rk3399 is a violation of the PCI
binding, as documented in IEEE Std 1275-1994. Changes to the kernel's
parsing of the DT made such violation fatal, as drivers cannot
probe the controller anymore.

Add the missing property makes the PCIe node compliant. While we
are at it, drop the pointless linux,pci-domain property, which only
makes sense when there are multiple host bridges.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200815125112.462652-3-maz@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 7a9a7aca86c6a..5df535ad4bbc3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -234,6 +234,7 @@ pcie0: pcie@f8000000 {
 		reg = <0x0 0xf8000000 0x0 0x2000000>,
 		      <0x0 0xfd000000 0x0 0x1000000>;
 		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
@@ -252,7 +253,6 @@ pcie0: pcie@f8000000 {
 				<0 0 0 2 &pcie0_intc 1>,
 				<0 0 0 3 &pcie0_intc 2>,
 				<0 0 0 4 &pcie0_intc 3>;
-		linux,pci-domain = <0>;
 		max-link-speed = <1>;
 		msi-map = <0x0 &its 0x0 0x1000>;
 		phys = <&pcie_phy 0>, <&pcie_phy 1>,
-- 
2.27.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.10 02/36] arm64: dts: rockchip: Fix PCIe DT properties on rk3399

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 43f20b1c6140896916f4e91aacc166830a7ba849 ]

It recently became apparent that the lack of a 'device_type = "pci"'
in the PCIe root complex node for rk3399 is a violation of the PCI
binding, as documented in IEEE Std 1275-1994. Changes to the kernel's
parsing of the DT made such violation fatal, as drivers cannot
probe the controller anymore.

Add the missing property makes the PCIe node compliant. While we
are at it, drop the pointless linux,pci-domain property, which only
makes sense when there are multiple host bridges.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200815125112.462652-3-maz@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 7a9a7aca86c6a..5df535ad4bbc3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -234,6 +234,7 @@ pcie0: pcie@f8000000 {
 		reg = <0x0 0xf8000000 0x0 0x2000000>,
 		      <0x0 0xfd000000 0x0 0x1000000>;
 		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
@@ -252,7 +253,6 @@ pcie0: pcie@f8000000 {
 				<0 0 0 2 &pcie0_intc 1>,
 				<0 0 0 3 &pcie0_intc 2>,
 				<0 0 0 4 &pcie0_intc 3>;
-		linux,pci-domain = <0>;
 		max-link-speed = <1>;
 		msi-map = <0x0 &its 0x0 0x1000>;
 		phys = <&pcie_phy 0>, <&pcie_phy 1>,
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 03/36] Input: goodix - add support for Goodix GT9286 chip

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

[ Upstream commit 2dce6db70c77bbe639f5cd9cc796fb8f2694a7d0 ]

The Goodix GT9286 is a capacitive touch sensor IC based on GT1x.

This chip can be found on a number of smartphones, including the
F(x)tec Pro 1 and the Elephone U.

This has been tested on F(x)Tec Pro1 (MSM8998).

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210109135512.149032-2-angelogioacchino.delregno@somainline.org
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/goodix.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 6612f9e2d7e83..45113767db964 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -157,6 +157,7 @@ static const struct goodix_chip_id goodix_chip_ids[] = {
 	{ .id = "5663", .data = &gt1x_chip_data },
 	{ .id = "5688", .data = &gt1x_chip_data },
 	{ .id = "917S", .data = &gt1x_chip_data },
+	{ .id = "9286", .data = &gt1x_chip_data },
 
 	{ .id = "911", .data = &gt911_chip_data },
 	{ .id = "9271", .data = &gt911_chip_data },
@@ -1445,6 +1446,7 @@ static const struct of_device_id goodix_of_match[] = {
 	{ .compatible = "goodix,gt927" },
 	{ .compatible = "goodix,gt9271" },
 	{ .compatible = "goodix,gt928" },
+	{ .compatible = "goodix,gt9286" },
 	{ .compatible = "goodix,gt967" },
 	{ }
 };
-- 
2.27.0

[PATCH AUTOSEL 5.10 04/36] arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc

[Sasha Levin]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 93f2a11580a9732c1d90f9e01a7e9facc825658f ]

The GCC_LPASS_Q6_AXI_CLK and GCC_LPASS_SWAY_CLK clocks may not be
touched on a typical UEFI based SDM845 device, but when the kernel is
built with CONFIG_SDM_LPASSCC_845 this happens, unless they are marked
as protected-clocks in the DT.

This was done for the MTP and the Pocophone, but not for DB845c and the
Lenovo Yoga C630 - causing these to fail to boot if the LPASS clock
controller is enabled (which it typically isn't).

Tested-by: Vinod Koul <vkoul@kernel.org> #on db845c
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201222001103.3112306-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts           | 4 +++-
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7cc236575ee20..c0b93813ea9ac 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -415,7 +415,9 @@ &dsi0_phy {
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
 };
 
 &gpu {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 76a8c996d497f..5748a404062bb 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -245,7 +245,9 @@ &cdsp_pas {
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
 };
 
 &gpu {
-- 
2.27.0

[PATCH AUTOSEL 5.10 05/36] ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 06862d789ddde8a99c1e579e934ca17c15a84755 ]

We get suspcious RCU usage splats with cpuidle in several places in
omap_enter_idle_coupled() with the kernel debug options enabled:

RCU used illegally from extended quiescent state!
...
(_raw_spin_lock_irqsave)
(omap_enter_idle_coupled+0x17c/0x2d8)
(omap_enter_idle_coupled)
(cpuidle_enter_state)
(cpuidle_enter_state_coupled)
(cpuidle_enter)

Let's use RCU_NONIDLE to suppress these splats. Things got changed around
with commit 1098582a0f6c ("sched,idle,rcu: Push rcu_idle deeper into the
idle path") that started triggering these warnings.

For the tick_broadcast related calls, ideally we'd just switch over to
using CPUIDLE_FLAG_TIMER_STOP for omap_enter_idle_coupled() to have the
generic cpuidle code handle the tick_broadcast related calls for us and
then just drop the tick_broadcast calls here.

But we're currently missing the call in the common cpuidle code for
tick_broadcast_enable() that CPU1 hotplug needs as described in earlier
commit 50d6b3cf9403 ("ARM: OMAP2+: fix lack of timer interrupts on CPU1
after hotplug").

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/cpuidle44xx.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index c8d317fafe2ea..de37027ad7587 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
 	/* Enter broadcast mode for periodic timers */
-	tick_broadcast_enable();
+	RCU_NONIDLE(tick_broadcast_enable());
 
 	/* Enter broadcast mode for one-shot timers */
-	tick_broadcast_enter();
+	RCU_NONIDLE(tick_broadcast_enter());
 
 	/*
 	 * Call idle CPU PM enter notifier chain so that
@@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+		RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 
 		/*
 		 * Call idle CPU cluster PM enter notifier chain
@@ -178,7 +178,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				index = 0;
 				cx = state_ptr + index;
 				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+				RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 				mpuss_can_lose_context = 0;
 			}
 		}
@@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		clkdm_deny_idle(cpu_clkdm[1]);
-		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu_clkdm[1]);
+		RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
+		RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
+		RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
 		    mpuss_can_lose_context) {
@@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	cpu_pm_exit();
 
 cpu_pm_out:
-	tick_broadcast_exit();
+	RCU_NONIDLE(tick_broadcast_exit());
 
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
-- 
2.27.0

[PATCH AUTOSEL 5.10 05/36] ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 06862d789ddde8a99c1e579e934ca17c15a84755 ]

We get suspcious RCU usage splats with cpuidle in several places in
omap_enter_idle_coupled() with the kernel debug options enabled:

RCU used illegally from extended quiescent state!
...
(_raw_spin_lock_irqsave)
(omap_enter_idle_coupled+0x17c/0x2d8)
(omap_enter_idle_coupled)
(cpuidle_enter_state)
(cpuidle_enter_state_coupled)
(cpuidle_enter)

Let's use RCU_NONIDLE to suppress these splats. Things got changed around
with commit 1098582a0f6c ("sched,idle,rcu: Push rcu_idle deeper into the
idle path") that started triggering these warnings.

For the tick_broadcast related calls, ideally we'd just switch over to
using CPUIDLE_FLAG_TIMER_STOP for omap_enter_idle_coupled() to have the
generic cpuidle code handle the tick_broadcast related calls for us and
then just drop the tick_broadcast calls here.

But we're currently missing the call in the common cpuidle code for
tick_broadcast_enable() that CPU1 hotplug needs as described in earlier
commit 50d6b3cf9403 ("ARM: OMAP2+: fix lack of timer interrupts on CPU1
after hotplug").

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/cpuidle44xx.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index c8d317fafe2ea..de37027ad7587 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
 	/* Enter broadcast mode for periodic timers */
-	tick_broadcast_enable();
+	RCU_NONIDLE(tick_broadcast_enable());
 
 	/* Enter broadcast mode for one-shot timers */
-	tick_broadcast_enter();
+	RCU_NONIDLE(tick_broadcast_enter());
 
 	/*
 	 * Call idle CPU PM enter notifier chain so that
@@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+		RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 
 		/*
 		 * Call idle CPU cluster PM enter notifier chain
@@ -178,7 +178,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				index = 0;
 				cx = state_ptr + index;
 				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+				RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 				mpuss_can_lose_context = 0;
 			}
 		}
@@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		clkdm_deny_idle(cpu_clkdm[1]);
-		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu_clkdm[1]);
+		RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
+		RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
+		RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
 		    mpuss_can_lose_context) {
@@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	cpu_pm_exit();
 
 cpu_pm_out:
-	tick_broadcast_exit();
+	RCU_NONIDLE(tick_broadcast_exit());
 
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 06/36] arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 94a5400f8b966c91c49991bae41c2ef911b935ac ]

A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: video-codec@ff660000:
'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'

The rkvdec driver gets it irq with help of the platform_get_irq()
function, so remove the interrupt-names property from the rk3399
vdec node.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
media/rockchip,vdec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210117181653.24886-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5df535ad4bbc3..7e69603fb41c0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1278,7 +1278,6 @@ vdec: video-codec@ff660000 {
 		compatible = "rockchip,rk3399-vdec";
 		reg = <0x0 0xff660000 0x0 0x400>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
 			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
 		clock-names = "axi", "ahb", "cabac", "core";
-- 
2.27.0

[PATCH AUTOSEL 5.10 06/36] arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 94a5400f8b966c91c49991bae41c2ef911b935ac ]

A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: video-codec@ff660000:
'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'

The rkvdec driver gets it irq with help of the platform_get_irq()
function, so remove the interrupt-names property from the rk3399
vdec node.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
media/rockchip,vdec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210117181653.24886-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5df535ad4bbc3..7e69603fb41c0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1278,7 +1278,6 @@ vdec: video-codec@ff660000 {
 		compatible = "rockchip,rk3399-vdec";
 		reg = <0x0 0xff660000 0x0 0x400>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
 			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
 		clock-names = "axi", "ahb", "cabac", "core";
-- 
2.27.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.10 06/36] arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node

[Sasha Levin]

From: Johan Jonker <jbx6244@gmail.com>

[ Upstream commit 94a5400f8b966c91c49991bae41c2ef911b935ac ]

A test with the command below gives this error:
/arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: video-codec@ff660000:
'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'

The rkvdec driver gets it irq with help of the platform_get_irq()
function, so remove the interrupt-names property from the rk3399
vdec node.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/
media/rockchip,vdec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210117181653.24886-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 5df535ad4bbc3..7e69603fb41c0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1278,7 +1278,6 @@ vdec: video-codec@ff660000 {
 		compatible = "rockchip,rk3399-vdec";
 		reg = <0x0 0xff660000 0x0 0x400>;
 		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
-		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
 			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
 		clock-names = "axi", "ahb", "cabac", "core";
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 07/36] kbuild: simplify GCC_PLUGINS enablement in dummy-tools/gcc

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit f4c3b83b75b91c5059726cb91e3165cc01764ce7 ]

With commit 1e860048c53e ("gcc-plugins: simplify GCC plugin-dev
capability test") applied, this hunk can be way simplified because
now scripts/gcc-plugins/Kconfig only checks plugin-version.h

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/dummy-tools/gcc | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/scripts/dummy-tools/gcc b/scripts/dummy-tools/gcc
index 33487e99d83e5..5c113cad56017 100755
--- a/scripts/dummy-tools/gcc
+++ b/scripts/dummy-tools/gcc
@@ -75,16 +75,12 @@ if arg_contain -S "$@"; then
 	fi
 fi
 
-# For scripts/gcc-plugin.sh
+# To set GCC_PLUGINS
 if arg_contain -print-file-name=plugin "$@"; then
 	plugin_dir=$(mktemp -d)
 
-	sed -n 's/.*#include "\(.*\)"/\1/p' $(dirname $0)/../gcc-plugins/gcc-common.h |
-	while read header
-	do
-		mkdir -p $plugin_dir/include/$(dirname $header)
-		touch $plugin_dir/include/$header
-	done
+	mkdir -p $plugin_dir/include
+	touch $plugin_dir/include/plugin-version.h
 
 	echo $plugin_dir
 	exit 0
-- 
2.27.0

[PATCH AUTOSEL 5.10 08/36] Input: xpad - sync supported devices with fork on GitHub

[Sasha Levin]

From: Benjamin Valentin <benpicco@googlemail.com>

[ Upstream commit 9bbd77d5bbc9aff8cb74d805c31751f5f0691ba8 ]

There is a fork of this driver on GitHub [0] that has been updated
with new device IDs.

Merge those into the mainline driver, so the out-of-tree fork is not
needed for users of those devices anymore.

[0] https://github.com/paroj/xpad

Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 8c73377ac82ca..3d004ca76b6ed 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -215,9 +215,17 @@ static const struct xpad_device {
 	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
-	{ 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02a0, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02a1, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02a2, "PDP Wired Controller for Xbox One - Crimson Red", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x02a4, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x02a6, "PDP Wired Controller for Xbox One - Camo Series", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02a7, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02a8, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02ab, "PDP Controller for Xbox One", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02ad, "PDP Wired Controller for Xbox One - Stealth Series", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02b3, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x02b8, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
@@ -296,6 +304,9 @@ static const struct xpad_device {
 	{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
+	{ 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE },
+	{ 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
@@ -429,8 +440,12 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
+	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA Controllers */
+	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA Controllers */
 	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA Controllers */
+	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke X-Box One pad */
+	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
 	{ }
 };
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 09/36] platform/x86: hp-wmi: Disable tablet-mode reporting by default

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 67fbe02a5cebc3c653610f12e3c0424e58450153 ]

Recently userspace has started making more use of SW_TABLET_MODE
(when an input-dev reports this).

Specifically recent GNOME3 versions will:

1.  When SW_TABLET_MODE is reported and is reporting 0:
1.1 Disable accelerometer-based screen auto-rotation
1.2 Disable automatically showing the on-screen keyboard when a
    text-input field is focussed

2.  When SW_TABLET_MODE is reported and is reporting 1:
2.1 Ignore input-events from the builtin keyboard and touchpad
    (this is for 360° hinges style 2-in-1s where the keyboard and
     touchpads are accessible on the back of the tablet when folded
     into tablet-mode)

This means that claiming to support SW_TABLET_MODE when it does not
actually work / reports correct values has bad side-effects.

The check in the hp-wmi code which is used to decide if the input-dev
should claim SW_TABLET_MODE support, only checks if the
HPWMI_HARDWARE_QUERY is supported. It does *not* check if the hardware
actually is capable of reporting SW_TABLET_MODE.

This leads to the hp-wmi input-dev claiming SW_TABLET_MODE support,
while in reality it will always report 0 as SW_TABLET_MODE value.
This has been seen on a "HP ENVY x360 Convertible 15-cp0xxx" and
this likely is the case on a whole lot of other HP models.

This problem causes both auto-rotation and on-screen keyboard
support to not work on affected x360 models.

There is no easy fix for this, but since userspace expects
SW_TABLET_MODE reporting to be reliable when advertised it is
better to not claim/report SW_TABLET_MODE support at all, then
to claim to support it while it does not work.

To avoid the mentioned problems, add a new enable_tablet_mode_sw
module-parameter which defaults to false.

Note I've made this an int using the standard -1=auto, 0=off, 1=on
triplett, with the hope that in the future we can come up with a
better way to detect SW_TABLET_MODE support. ATM the default
auto option just does the same as off.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1918255
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210120124941.73409-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/hp-wmi.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 18bf8aeb5f870..e94e59283ecb9 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -32,6 +32,10 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS("wmi:95F24279-4D7B-4334-9387-ACCDC67EF61C");
 MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 
+static int enable_tablet_mode_sw = -1;
+module_param(enable_tablet_mode_sw, int, 0444);
+MODULE_PARM_DESC(enable_tablet_mode_sw, "Enable SW_TABLET_MODE reporting (-1=auto, 0=no, 1=yes)");
+
 #define HPWMI_EVENT_GUID "95F24279-4D7B-4334-9387-ACCDC67EF61C"
 #define HPWMI_BIOS_GUID "5FB7F034-2C63-45e9-BE91-3D44E2C707E4"
 
@@ -654,10 +658,12 @@ static int __init hp_wmi_input_setup(void)
 	}
 
 	/* Tablet mode */
-	val = hp_wmi_hw_state(HPWMI_TABLET_MASK);
-	if (!(val < 0)) {
-		__set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
-		input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, val);
+	if (enable_tablet_mode_sw > 0) {
+		val = hp_wmi_hw_state(HPWMI_TABLET_MASK);
+		if (val >= 0) {
+			__set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
+			input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, val);
+		}
 	}
 
 	err = sparse_keymap_setup(hp_wmi_input_dev, hp_wmi_keymap, NULL);
-- 
2.27.0

[PATCH AUTOSEL 5.10 10/36] arm64: dts: rockchip: Disable display for NanoPi R2S

[Sasha Levin]

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit 74532de460ec664e5a725507d1b59aa9e4d40776 ]

NanoPi R2S is headless, so rightly does not enable any of the display
interface hardware, which currently provokes an obnoxious error in the
boot log from the fake DRM device failing to find anything to bind to.
It probably isn't *too* hard to obviate the fake device shenanigans
entirely with a bit of driver reshuffling, but for now let's just
disable it here to shut up the spurious error.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c4553dfad1ad6792c4f22454c135ff55de77e2d6.1611186099.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 2ee07d15a6e37..1eecad724f04c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -114,6 +114,10 @@ &cpu3 {
 	cpu-supply = <&vdd_arm>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &gmac2io {
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
-- 
2.27.0

[PATCH AUTOSEL 5.10 10/36] arm64: dts: rockchip: Disable display for NanoPi R2S

[Sasha Levin]

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit 74532de460ec664e5a725507d1b59aa9e4d40776 ]

NanoPi R2S is headless, so rightly does not enable any of the display
interface hardware, which currently provokes an obnoxious error in the
boot log from the fake DRM device failing to find anything to bind to.
It probably isn't *too* hard to obviate the fake device shenanigans
entirely with a bit of driver reshuffling, but for now let's just
disable it here to shut up the spurious error.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c4553dfad1ad6792c4f22454c135ff55de77e2d6.1611186099.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 2ee07d15a6e37..1eecad724f04c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -114,6 +114,10 @@ &cpu3 {
 	cpu-supply = <&vdd_arm>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &gmac2io {
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
-- 
2.27.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.10 10/36] arm64: dts: rockchip: Disable display for NanoPi R2S

[Sasha Levin]

From: Robin Murphy <robin.murphy@arm.com>

[ Upstream commit 74532de460ec664e5a725507d1b59aa9e4d40776 ]

NanoPi R2S is headless, so rightly does not enable any of the display
interface hardware, which currently provokes an obnoxious error in the
boot log from the fake DRM device failing to find anything to bind to.
It probably isn't *too* hard to obviate the fake device shenanigans
entirely with a bit of driver reshuffling, but for now let's just
disable it here to shut up the spurious error.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c4553dfad1ad6792c4f22454c135ff55de77e2d6.1611186099.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 2ee07d15a6e37..1eecad724f04c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -114,6 +114,10 @@ &cpu3 {
 	cpu-supply = <&vdd_arm>;
 };
 
+&display_subsystem {
+	status = "disabled";
+};
+
 &gmac2io {
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 11/36] ovl: perform vfs_getxattr() with mounter creds

[Sasha Levin]

From: Miklos Szeredi <mszeredi@redhat.com>

[ Upstream commit 554677b97257b0b69378bd74e521edb7e94769ff ]

The vfs_getxattr() in ovl_xattr_set() is used to check whether an xattr
exist on a lower layer file that is to be removed.  If the xattr does not
exist, then no need to copy up the file.

This call of vfs_getxattr() wasn't wrapped in credential override, and this
is probably okay.  But for consitency wrap this instance as well.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/overlayfs/inode.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index b584dca845baa..4fadafd8bdc12 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -346,7 +346,9 @@ int ovl_xattr_set(struct dentry *dentry, struct inode *inode, const char *name,
 		goto out;
 
 	if (!value && !upperdentry) {
+		old_cred = ovl_override_creds(dentry->d_sb);
 		err = vfs_getxattr(realdentry, name, NULL, 0);
+		revert_creds(old_cred);
 		if (err < 0)
 			goto out_drop_write;
 	}
-- 
2.27.0

[PATCH AUTOSEL 5.10 12/36] cap: fix conversions on getxattr

[Sasha Levin]

From: Miklos Szeredi <mszeredi@redhat.com>

[ Upstream commit f2b00be488730522d0fb7a8a5de663febdcefe0a ]

If a capability is stored on disk in v2 format cap_inode_getsecurity() will
currently return in v2 format unconditionally.

This is wrong: v2 cap should be equivalent to a v3 cap with zero rootid,
and so the same conversions performed on it.

If the rootid cannot be mapped, v3 is returned unconverted.  Fix this so
that both v2 and v3 return -EOVERFLOW if the rootid (or the owner of the fs
user namespace in case of v2) cannot be mapped into the current user
namespace.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/commoncap.c | 67 ++++++++++++++++++++++++++++----------------
 1 file changed, 43 insertions(+), 24 deletions(-)

diff --git a/security/commoncap.c b/security/commoncap.c
index 59bf3c1674c8b..a6c9bb4441d54 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -371,10 +371,11 @@ int cap_inode_getsecurity(struct inode *inode, const char *name, void **buffer,
 {
 	int size, ret;
 	kuid_t kroot;
+	u32 nsmagic, magic;
 	uid_t root, mappedroot;
 	char *tmpbuf = NULL;
 	struct vfs_cap_data *cap;
-	struct vfs_ns_cap_data *nscap;
+	struct vfs_ns_cap_data *nscap = NULL;
 	struct dentry *dentry;
 	struct user_namespace *fs_ns;
 
@@ -396,46 +397,61 @@ int cap_inode_getsecurity(struct inode *inode, const char *name, void **buffer,
 	fs_ns = inode->i_sb->s_user_ns;
 	cap = (struct vfs_cap_data *) tmpbuf;
 	if (is_v2header((size_t) ret, cap)) {
-		/* If this is sizeof(vfs_cap_data) then we're ok with the
-		 * on-disk value, so return that.  */
-		if (alloc)
-			*buffer = tmpbuf;
-		else
-			kfree(tmpbuf);
-		return ret;
-	} else if (!is_v3header((size_t) ret, cap)) {
-		kfree(tmpbuf);
-		return -EINVAL;
+		root = 0;
+	} else if (is_v3header((size_t) ret, cap)) {
+		nscap = (struct vfs_ns_cap_data *) tmpbuf;
+		root = le32_to_cpu(nscap->rootid);
+	} else {
+		size = -EINVAL;
+		goto out_free;
 	}
 
-	nscap = (struct vfs_ns_cap_data *) tmpbuf;
-	root = le32_to_cpu(nscap->rootid);
 	kroot = make_kuid(fs_ns, root);
 
 	/* If the root kuid maps to a valid uid in current ns, then return
 	 * this as a nscap. */
 	mappedroot = from_kuid(current_user_ns(), kroot);
 	if (mappedroot != (uid_t)-1 && mappedroot != (uid_t)0) {
+		size = sizeof(struct vfs_ns_cap_data);
 		if (alloc) {
-			*buffer = tmpbuf;
+			if (!nscap) {
+				/* v2 -> v3 conversion */
+				nscap = kzalloc(size, GFP_ATOMIC);
+				if (!nscap) {
+					size = -ENOMEM;
+					goto out_free;
+				}
+				nsmagic = VFS_CAP_REVISION_3;
+				magic = le32_to_cpu(cap->magic_etc);
+				if (magic & VFS_CAP_FLAGS_EFFECTIVE)
+					nsmagic |= VFS_CAP_FLAGS_EFFECTIVE;
+				memcpy(&nscap->data, &cap->data, sizeof(__le32) * 2 * VFS_CAP_U32);
+				nscap->magic_etc = cpu_to_le32(nsmagic);
+			} else {
+				/* use allocated v3 buffer */
+				tmpbuf = NULL;
+			}
 			nscap->rootid = cpu_to_le32(mappedroot);
-		} else
-			kfree(tmpbuf);
-		return size;
+			*buffer = nscap;
+		}
+		goto out_free;
 	}
 
 	if (!rootid_owns_currentns(kroot)) {
-		kfree(tmpbuf);
-		return -EOPNOTSUPP;
+		size = -EOVERFLOW;
+		goto out_free;
 	}
 
 	/* This comes from a parent namespace.  Return as a v2 capability */
 	size = sizeof(struct vfs_cap_data);
 	if (alloc) {
-		*buffer = kmalloc(size, GFP_ATOMIC);
-		if (*buffer) {
-			struct vfs_cap_data *cap = *buffer;
-			__le32 nsmagic, magic;
+		if (nscap) {
+			/* v3 -> v2 conversion */
+			cap = kzalloc(size, GFP_ATOMIC);
+			if (!cap) {
+				size = -ENOMEM;
+				goto out_free;
+			}
 			magic = VFS_CAP_REVISION_2;
 			nsmagic = le32_to_cpu(nscap->magic_etc);
 			if (nsmagic & VFS_CAP_FLAGS_EFFECTIVE)
@@ -443,9 +459,12 @@ int cap_inode_getsecurity(struct inode *inode, const char *name, void **buffer,
 			memcpy(&cap->data, &nscap->data, sizeof(__le32) * 2 * VFS_CAP_U32);
 			cap->magic_etc = cpu_to_le32(magic);
 		} else {
-			size = -ENOMEM;
+			/* use unconverted v2 */
+			tmpbuf = NULL;
 		}
+		*buffer = cap;
 	}
+out_free:
 	kfree(tmpbuf);
 	return size;
 }
-- 
2.27.0

[PATCH AUTOSEL 5.10 13/36] ovl: skip getxattr of security labels

[Sasha Levin]

From: Amir Goldstein <amir73il@gmail.com>

[ Upstream commit 03fedf93593c82538b18476d8c4f0e8f8435ea70 ]

When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.

When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr.  This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.

This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().

ovl_copy_xattr() skips copy up of security labels that are indentified by
inode_copy_up_xattr LSM hooks, but it does that after vfs_getxattr().
Since we are not going to copy them, skip vfs_getxattr() of the security
labels.

Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/overlayfs/copy_up.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index 955ecd4030f04..89d5d59c7d7a4 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -84,6 +84,14 @@ int ovl_copy_xattr(struct super_block *sb, struct dentry *old,
 
 		if (ovl_is_private_xattr(sb, name))
 			continue;
+
+		error = security_inode_copy_up_xattr(name);
+		if (error < 0 && error != -EOPNOTSUPP)
+			break;
+		if (error == 1) {
+			error = 0;
+			continue; /* Discard */
+		}
 retry:
 		size = vfs_getxattr(old, name, value, value_size);
 		if (size == -ERANGE)
@@ -107,13 +115,6 @@ int ovl_copy_xattr(struct super_block *sb, struct dentry *old,
 			goto retry;
 		}
 
-		error = security_inode_copy_up_xattr(name);
-		if (error < 0 && error != -EOPNOTSUPP)
-			break;
-		if (error == 1) {
-			error = 0;
-			continue; /* Discard */
-		}
 		error = vfs_setxattr(new, name, value, size, 0);
 		if (error) {
 			if (error != -EOPNOTSUPP || ovl_must_copy_xattr(name))
-- 
2.27.0

[PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Sasha Levin]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]

Each entry in the array is a 20 bits value composed of 16 bits unsigned
integer and 4 bits fractional part. So the type should change to __u32.
In addition add a documentation of how the measurements are done.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkisp1/uapi/rkisp1-config.h | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
index 432cb6be55b47..c19fe059c2442 100644
--- a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
+++ b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
@@ -848,13 +848,18 @@ struct rkisp1_cif_isp_af_stat {
 /**
  * struct rkisp1_cif_isp_hist_stat - statistics histogram data
  *
- * @hist_bins: measured bin counters
+ * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point
+ *	       type. Bits 0-4 are the fractional part and bits 5-19 are the
+ *	       integer part.
  *
- * Measurement window divided into 25 sub-windows, set
- * with ISP_HIST_XXX
+ * The window of the measurements area is divided to 5x5 sub-windows. The
+ * histogram is then computed for each sub-window independently and the final
+ * result is a weighted average of the histogram measurements on all
+ * sub-windows. The window of the measurements area and the weight of each
+ * sub-window are configurable using struct @rkisp1_cif_isp_hst_config.
  */
 struct rkisp1_cif_isp_hist_stat {
-	__u16 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
+	__u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
 };
 
 /**
-- 
2.27.0

[PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Sasha Levin]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]

Each entry in the array is a 20 bits value composed of 16 bits unsigned
integer and 4 bits fractional part. So the type should change to __u32.
In addition add a documentation of how the measurements are done.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkisp1/uapi/rkisp1-config.h | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
index 432cb6be55b47..c19fe059c2442 100644
--- a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
+++ b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
@@ -848,13 +848,18 @@ struct rkisp1_cif_isp_af_stat {
 /**
  * struct rkisp1_cif_isp_hist_stat - statistics histogram data
  *
- * @hist_bins: measured bin counters
+ * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point
+ *	       type. Bits 0-4 are the fractional part and bits 5-19 are the
+ *	       integer part.
  *
- * Measurement window divided into 25 sub-windows, set
- * with ISP_HIST_XXX
+ * The window of the measurements area is divided to 5x5 sub-windows. The
+ * histogram is then computed for each sub-window independently and the final
+ * result is a weighted average of the histogram measurements on all
+ * sub-windows. The window of the measurements area and the weight of each
+ * sub-window are configurable using struct @rkisp1_cif_isp_hst_config.
  */
 struct rkisp1_cif_isp_hist_stat {
-	__u16 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
+	__u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
 };
 
 /**
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.10 15/36] media: rkisp1: stats: remove a wrong cast to u8

[Sasha Levin]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit a76f8dc8be471028540df24749e99a3ec0ac7c94 ]

hist_bins is an array of type __u32. Each entry represent
a 20 bit fixed point value as documented inline.
The cast to u8 when setting the values is wrong. Remove it.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkisp1/rkisp1-stats.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-stats.c b/drivers/staging/media/rkisp1/rkisp1-stats.c
index 51c64f75fe29a..8fdf646c4b75b 100644
--- a/drivers/staging/media/rkisp1/rkisp1-stats.c
+++ b/drivers/staging/media/rkisp1/rkisp1-stats.c
@@ -253,8 +253,7 @@ static void rkisp1_stats_get_hst_meas(struct rkisp1_stats *stats,
 	pbuf->meas_type |= RKISP1_CIF_ISP_STAT_HIST;
 	for (i = 0; i < RKISP1_CIF_ISP_HIST_BIN_N_MAX; i++)
 		pbuf->params.hist.hist_bins[i] =
-			(u8)rkisp1_read(rkisp1,
-					RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
+			rkisp1_read(rkisp1, RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
 }
 
 static void rkisp1_stats_get_bls_meas(struct rkisp1_stats *stats,
-- 
2.27.0

[PATCH AUTOSEL 5.10 15/36] media: rkisp1: stats: remove a wrong cast to u8

[Sasha Levin]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit a76f8dc8be471028540df24749e99a3ec0ac7c94 ]

hist_bins is an array of type __u32. Each entry represent
a 20 bit fixed point value as documented inline.
The cast to u8 when setting the values is wrong. Remove it.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkisp1/rkisp1-stats.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-stats.c b/drivers/staging/media/rkisp1/rkisp1-stats.c
index 51c64f75fe29a..8fdf646c4b75b 100644
--- a/drivers/staging/media/rkisp1/rkisp1-stats.c
+++ b/drivers/staging/media/rkisp1/rkisp1-stats.c
@@ -253,8 +253,7 @@ static void rkisp1_stats_get_hst_meas(struct rkisp1_stats *stats,
 	pbuf->meas_type |= RKISP1_CIF_ISP_STAT_HIST;
 	for (i = 0; i < RKISP1_CIF_ISP_HIST_BIN_N_MAX; i++)
 		pbuf->params.hist.hist_bins[i] =
-			(u8)rkisp1_read(rkisp1,
-					RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
+			rkisp1_read(rkisp1, RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
 }
 
 static void rkisp1_stats_get_bls_meas(struct rkisp1_stats *stats,
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.10 16/36] media: rkisp1: stats: mask the hist_bins values

[Sasha Levin]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit a802a0430b863f03bc01aaea2d2bf6ff464f03e7 ]

hist_bins is an array of type __u32. Each entry represents
a 20 bit value. So mask out the unused bits.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkisp1/rkisp1-regs.h  | 1 +
 drivers/staging/media/rkisp1/rkisp1-stats.c | 8 +++++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-regs.h b/drivers/staging/media/rkisp1/rkisp1-regs.h
index 049f6c3a11df5..5819e58b2e557 100644
--- a/drivers/staging/media/rkisp1/rkisp1-regs.h
+++ b/drivers/staging/media/rkisp1/rkisp1-regs.h
@@ -365,6 +365,7 @@
 #define RKISP1_CIF_ISP_MAX_HIST_PREDIVIDER		0x0000007F
 #define RKISP1_CIF_ISP_HIST_ROW_NUM			5
 #define RKISP1_CIF_ISP_HIST_COLUMN_NUM			5
+#define RKISP1_CIF_ISP_HIST_GET_BIN(x)			((x) & 0x000FFFFF)
 
 /* AUTO FOCUS MEASUREMENT:  ISP_AFM_CTRL */
 #define RKISP1_ISP_AFM_CTRL_ENABLE			BIT(0)
diff --git a/drivers/staging/media/rkisp1/rkisp1-stats.c b/drivers/staging/media/rkisp1/rkisp1-stats.c
index 8fdf646c4b75b..e52ba9b154e90 100644
--- a/drivers/staging/media/rkisp1/rkisp1-stats.c
+++ b/drivers/staging/media/rkisp1/rkisp1-stats.c
@@ -251,9 +251,11 @@ static void rkisp1_stats_get_hst_meas(struct rkisp1_stats *stats,
 	unsigned int i;
 
 	pbuf->meas_type |= RKISP1_CIF_ISP_STAT_HIST;
-	for (i = 0; i < RKISP1_CIF_ISP_HIST_BIN_N_MAX; i++)
-		pbuf->params.hist.hist_bins[i] =
-			rkisp1_read(rkisp1, RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
+	for (i = 0; i < RKISP1_CIF_ISP_HIST_BIN_N_MAX; i++) {
+		u32 reg_val = rkisp1_read(rkisp1, RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
+
+		pbuf->params.hist.hist_bins[i] = RKISP1_CIF_ISP_HIST_GET_BIN(reg_val);
+	}
 }
 
 static void rkisp1_stats_get_bls_meas(struct rkisp1_stats *stats,
-- 
2.27.0

[PATCH AUTOSEL 5.10 16/36] media: rkisp1: stats: mask the hist_bins values

[Sasha Levin]

From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>

[ Upstream commit a802a0430b863f03bc01aaea2d2bf6ff464f03e7 ]

hist_bins is an array of type __u32. Each entry represents
a 20 bit value. So mask out the unused bits.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/rkisp1/rkisp1-regs.h  | 1 +
 drivers/staging/media/rkisp1/rkisp1-stats.c | 8 +++++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/rkisp1/rkisp1-regs.h b/drivers/staging/media/rkisp1/rkisp1-regs.h
index 049f6c3a11df5..5819e58b2e557 100644
--- a/drivers/staging/media/rkisp1/rkisp1-regs.h
+++ b/drivers/staging/media/rkisp1/rkisp1-regs.h
@@ -365,6 +365,7 @@
 #define RKISP1_CIF_ISP_MAX_HIST_PREDIVIDER		0x0000007F
 #define RKISP1_CIF_ISP_HIST_ROW_NUM			5
 #define RKISP1_CIF_ISP_HIST_COLUMN_NUM			5
+#define RKISP1_CIF_ISP_HIST_GET_BIN(x)			((x) & 0x000FFFFF)
 
 /* AUTO FOCUS MEASUREMENT:  ISP_AFM_CTRL */
 #define RKISP1_ISP_AFM_CTRL_ENABLE			BIT(0)
diff --git a/drivers/staging/media/rkisp1/rkisp1-stats.c b/drivers/staging/media/rkisp1/rkisp1-stats.c
index 8fdf646c4b75b..e52ba9b154e90 100644
--- a/drivers/staging/media/rkisp1/rkisp1-stats.c
+++ b/drivers/staging/media/rkisp1/rkisp1-stats.c
@@ -251,9 +251,11 @@ static void rkisp1_stats_get_hst_meas(struct rkisp1_stats *stats,
 	unsigned int i;
 
 	pbuf->meas_type |= RKISP1_CIF_ISP_STAT_HIST;
-	for (i = 0; i < RKISP1_CIF_ISP_HIST_BIN_N_MAX; i++)
-		pbuf->params.hist.hist_bins[i] =
-			rkisp1_read(rkisp1, RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
+	for (i = 0; i < RKISP1_CIF_ISP_HIST_BIN_N_MAX; i++) {
+		u32 reg_val = rkisp1_read(rkisp1, RKISP1_CIF_ISP_HIST_BIN_0 + i * 4);
+
+		pbuf->params.hist.hist_bins[i] = RKISP1_CIF_ISP_HIST_GET_BIN(reg_val);
+	}
 }
 
 static void rkisp1_stats_get_bls_meas(struct rkisp1_stats *stats,
-- 
2.27.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.10 17/36] scsi: lpfc: Fix EEH encountering oops with NVMe traffic

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 8c65830ae1629b03e5d65e9aafae7e2cf5f8b743 ]

In testing, in a configuration with Redfish and native NVMe multipath when
an EEH is injected, a kernel oops is being encountered:

(unreliable)
lpfc_nvme_ls_req+0x328/0x720 [lpfc]
__nvme_fc_send_ls_req.constprop.13+0x1d8/0x3d0 [nvme_fc]
nvme_fc_create_association+0x224/0xd10 [nvme_fc]
nvme_fc_reset_ctrl_work+0x110/0x154 [nvme_fc]
process_one_work+0x304/0x5d

the NBMe transport is issuing a Disconnect LS request, which the driver
receives and tries to post but the work queue used by the driver is already
being torn down by the eeh.

Fix by validating the validity of the work queue before proceeding with the
LS transmit.

Link: https://lore.kernel.org/r/20210127221601.84878-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nvme.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 69f1a0457f51e..03c81cec6bc98 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -714,6 +714,9 @@ __lpfc_nvme_ls_req(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		return -ENODEV;
 	}
 
+	if (!vport->phba->sli4_hba.nvmels_wq)
+		return -ENOMEM;
+
 	/*
 	 * there are two dma buf in the request, actually there is one and
 	 * the second one is just the start address + cmd size.
-- 
2.27.0

[PATCH AUTOSEL 5.10 18/36] x86/split_lock: Enable the split lock feature on another Alder Lake CPU

[Sasha Levin]

From: Fenghua Yu <fenghua.yu@intel.com>

[ Upstream commit 8acf417805a5f5c69e9ff66f14cab022c2755161 ]

Add Alder Lake mobile processor to CPU list to enumerate and enable the
split lock feature.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20210201190007.4031869-1-fenghua.yu@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/intel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 59a1e3ce3f145..816fdbec795a4 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -1159,6 +1159,7 @@ static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		1),
 	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	1),
 	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		1),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		1),
 	{}
 };
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 19/36] nvme-pci: ignore the subsysem NQN on Phison E16

[Sasha Levin]

From: Claus Stovgaard <claus.stovgaard@gmail.com>

[ Upstream commit c9e95c39280530200cdd0bbd2670e6334a81970b ]

Tested both with Corsairs firmware 11.3 and 13.0 for the Corsairs MP600
and both have the issue as reported by the kernel.

nvme nvme0: missing or invalid SUBNQN field.

Signed-off-by: Claus Stovgaard <claus.stovgaard@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index a3486c1c27f0c..59c4e124f5482 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3247,6 +3247,8 @@ static const struct pci_device_id nvme_id_table[] = {
 	{ PCI_DEVICE(0x144d, 0xa822),   /* Samsung PM1725a */
 		.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
 				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+	{ PCI_DEVICE(0x1987, 0x5016),	/* Phison E16 */
+		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_DEVICE(0x1d1d, 0x1f1f),	/* LighNVM qemu device */
 		.driver_data = NVME_QUIRK_LIGHTNVM, },
 	{ PCI_DEVICE(0x1d1d, 0x2807),	/* CNEX WL */
-- 
2.27.0

[PATCH AUTOSEL 5.10 19/36] nvme-pci: ignore the subsysem NQN on Phison E16

[Sasha Levin]

From: Claus Stovgaard <claus.stovgaard@gmail.com>

[ Upstream commit c9e95c39280530200cdd0bbd2670e6334a81970b ]

Tested both with Corsairs firmware 11.3 and 13.0 for the Corsairs MP600
and both have the issue as reported by the kernel.

nvme nvme0: missing or invalid SUBNQN field.

Signed-off-by: Claus Stovgaard <claus.stovgaard@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index a3486c1c27f0c..59c4e124f5482 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3247,6 +3247,8 @@ static const struct pci_device_id nvme_id_table[] = {
 	{ PCI_DEVICE(0x144d, 0xa822),   /* Samsung PM1725a */
 		.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
 				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+	{ PCI_DEVICE(0x1987, 0x5016),	/* Phison E16 */
+		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_DEVICE(0x1d1d, 0x1f1f),	/* LighNVM qemu device */
 		.driver_data = NVME_QUIRK_LIGHTNVM, },
 	{ PCI_DEVICE(0x1d1d, 0x2807),	/* CNEX WL */
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH AUTOSEL 5.10 20/36] drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVAL

[Sasha Levin]

From: George Shen <george.shen@amd.com>

[ Upstream commit 2b6b7ab4b1cabfbee1af5d818efcab5d51d62c7e ]

[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.

[How]
Update values to match the spec.

Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 17e6fd8201395..32b73ea866737 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -877,13 +877,13 @@ static uint32_t translate_training_aux_read_interval(uint32_t dpcd_aux_read_inte
 
 	switch (dpcd_aux_read_interval) {
 	case 0x01:
-		aux_rd_interval_us = 400;
+		aux_rd_interval_us = 4000;
 		break;
 	case 0x02:
-		aux_rd_interval_us = 4000;
+		aux_rd_interval_us = 8000;
 		break;
 	case 0x03:
-		aux_rd_interval_us = 8000;
+		aux_rd_interval_us = 12000;
 		break;
 	case 0x04:
 		aux_rd_interval_us = 16000;
-- 
2.27.0

[PATCH AUTOSEL 5.10 20/36] drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVAL

[Sasha Levin]

From: George Shen <george.shen@amd.com>

[ Upstream commit 2b6b7ab4b1cabfbee1af5d818efcab5d51d62c7e ]

[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.

[How]
Update values to match the spec.

Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 17e6fd8201395..32b73ea866737 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -877,13 +877,13 @@ static uint32_t translate_training_aux_read_interval(uint32_t dpcd_aux_read_inte
 
 	switch (dpcd_aux_read_interval) {
 	case 0x01:
-		aux_rd_interval_us = 400;
+		aux_rd_interval_us = 4000;
 		break;
 	case 0x02:
-		aux_rd_interval_us = 4000;
+		aux_rd_interval_us = 8000;
 		break;
 	case 0x03:
-		aux_rd_interval_us = 8000;
+		aux_rd_interval_us = 12000;
 		break;
 	case 0x04:
 		aux_rd_interval_us = 16000;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.10 20/36] drm/amd/display: Fix DPCD translation for LTTPR AUX_RD_INTERVAL

[Sasha Levin]

From: George Shen <george.shen@amd.com>

[ Upstream commit 2b6b7ab4b1cabfbee1af5d818efcab5d51d62c7e ]

[Why]
The translation between the DPCD value and the specified AUX_RD_INTERVAL
in the DP spec do not match.

[How]
Update values to match the spec.

Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 17e6fd8201395..32b73ea866737 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -877,13 +877,13 @@ static uint32_t translate_training_aux_read_interval(uint32_t dpcd_aux_read_inte
 
 	switch (dpcd_aux_read_interval) {
 	case 0x01:
-		aux_rd_interval_us = 400;
+		aux_rd_interval_us = 4000;
 		break;
 	case 0x02:
-		aux_rd_interval_us = 4000;
+		aux_rd_interval_us = 8000;
 		break;
 	case 0x03:
-		aux_rd_interval_us = 8000;
+		aux_rd_interval_us = 12000;
 		break;
 	case 0x04:
 		aux_rd_interval_us = 16000;
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.10 21/36] drm/amd/display: Add more Clock Sources to DCN2.1

[Sasha Levin]

From: Sung Lee <sung.lee@amd.com>

[ Upstream commit 1622711beebe887e4f0f8237fea1f09bb48e9a51 ]

[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.

[HOW]
Initialize more clock sources.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 20441127783ba..c993854404124 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -902,6 +902,8 @@ enum dcn20_clk_src_array_id {
 	DCN20_CLK_SRC_PLL0,
 	DCN20_CLK_SRC_PLL1,
 	DCN20_CLK_SRC_PLL2,
+	DCN20_CLK_SRC_PLL3,
+	DCN20_CLK_SRC_PLL4,
 	DCN20_CLK_SRC_TOTAL_DCN21
 };
 
@@ -1880,6 +1882,14 @@ static bool dcn21_resource_construct(
 			dcn21_clock_source_create(ctx, ctx->dc_bios,
 				CLOCK_SOURCE_COMBO_PHY_PLL2,
 				&clk_src_regs[2], false);
+	pool->base.clock_sources[DCN20_CLK_SRC_PLL3] =
+			dcn21_clock_source_create(ctx, ctx->dc_bios,
+				CLOCK_SOURCE_COMBO_PHY_PLL3,
+				&clk_src_regs[3], false);
+	pool->base.clock_sources[DCN20_CLK_SRC_PLL4] =
+			dcn21_clock_source_create(ctx, ctx->dc_bios,
+				CLOCK_SOURCE_COMBO_PHY_PLL4,
+				&clk_src_regs[4], false);
 
 	pool->base.clk_src_count = DCN20_CLK_SRC_TOTAL_DCN21;
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 21/36] drm/amd/display: Add more Clock Sources to DCN2.1

[Sasha Levin]

From: Sung Lee <sung.lee@amd.com>

[ Upstream commit 1622711beebe887e4f0f8237fea1f09bb48e9a51 ]

[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.

[HOW]
Initialize more clock sources.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 20441127783ba..c993854404124 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -902,6 +902,8 @@ enum dcn20_clk_src_array_id {
 	DCN20_CLK_SRC_PLL0,
 	DCN20_CLK_SRC_PLL1,
 	DCN20_CLK_SRC_PLL2,
+	DCN20_CLK_SRC_PLL3,
+	DCN20_CLK_SRC_PLL4,
 	DCN20_CLK_SRC_TOTAL_DCN21
 };
 
@@ -1880,6 +1882,14 @@ static bool dcn21_resource_construct(
 			dcn21_clock_source_create(ctx, ctx->dc_bios,
 				CLOCK_SOURCE_COMBO_PHY_PLL2,
 				&clk_src_regs[2], false);
+	pool->base.clock_sources[DCN20_CLK_SRC_PLL3] =
+			dcn21_clock_source_create(ctx, ctx->dc_bios,
+				CLOCK_SOURCE_COMBO_PHY_PLL3,
+				&clk_src_regs[3], false);
+	pool->base.clock_sources[DCN20_CLK_SRC_PLL4] =
+			dcn21_clock_source_create(ctx, ctx->dc_bios,
+				CLOCK_SOURCE_COMBO_PHY_PLL4,
+				&clk_src_regs[4], false);
 
 	pool->base.clk_src_count = DCN20_CLK_SRC_TOTAL_DCN21;
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.10 21/36] drm/amd/display: Add more Clock Sources to DCN2.1

[Sasha Levin]

From: Sung Lee <sung.lee@amd.com>

[ Upstream commit 1622711beebe887e4f0f8237fea1f09bb48e9a51 ]

[WHY]
When enabling HDMI on ComboPHY, there are not
enough clock sources to complete display detection.

[HOW]
Initialize more clock sources.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 20441127783ba..c993854404124 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -902,6 +902,8 @@ enum dcn20_clk_src_array_id {
 	DCN20_CLK_SRC_PLL0,
 	DCN20_CLK_SRC_PLL1,
 	DCN20_CLK_SRC_PLL2,
+	DCN20_CLK_SRC_PLL3,
+	DCN20_CLK_SRC_PLL4,
 	DCN20_CLK_SRC_TOTAL_DCN21
 };
 
@@ -1880,6 +1882,14 @@ static bool dcn21_resource_construct(
 			dcn21_clock_source_create(ctx, ctx->dc_bios,
 				CLOCK_SOURCE_COMBO_PHY_PLL2,
 				&clk_src_regs[2], false);
+	pool->base.clock_sources[DCN20_CLK_SRC_PLL3] =
+			dcn21_clock_source_create(ctx, ctx->dc_bios,
+				CLOCK_SOURCE_COMBO_PHY_PLL3,
+				&clk_src_regs[3], false);
+	pool->base.clock_sources[DCN20_CLK_SRC_PLL4] =
+			dcn21_clock_source_create(ctx, ctx->dc_bios,
+				CLOCK_SOURCE_COMBO_PHY_PLL4,
+				&clk_src_regs[4], false);
 
 	pool->base.clk_src_count = DCN20_CLK_SRC_TOTAL_DCN21;
 
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.10 22/36] drm/amd/display: Release DSC before acquiring

[Sasha Levin]

From: Mikita Lipski <mikita.lipski@amd.com>

[ Upstream commit 58180a0cc0c57fe62a799a112f95b60f6935bd96 ]

[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.

[how]
Before acquiring dsc to stream resources, first remove it.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index eee19edeeee5c..1e448f1b39a18 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -828,6 +828,9 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 		if (computed_streams[i])
 			continue;
 
+		if (dcn20_remove_stream_from_ctx(stream->ctx->dc, dc_state, stream) != DC_OK)
+			return false;
+
 		mutex_lock(&aconnector->mst_mgr.lock);
 		if (!compute_mst_dsc_configs_for_link(state, dc_state, stream->link)) {
 			mutex_unlock(&aconnector->mst_mgr.lock);
@@ -845,7 +848,8 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 		stream = dc_state->streams[i];
 
 		if (stream->timing.flags.DSC == 1)
-			dc_stream_add_dsc_to_resource(stream->ctx->dc, dc_state, stream);
+			if (dc_stream_add_dsc_to_resource(stream->ctx->dc, dc_state, stream) != DC_OK)
+				return false;
 	}
 
 	return true;
-- 
2.27.0

[PATCH AUTOSEL 5.10 22/36] drm/amd/display: Release DSC before acquiring

[Sasha Levin]

From: Mikita Lipski <mikita.lipski@amd.com>

[ Upstream commit 58180a0cc0c57fe62a799a112f95b60f6935bd96 ]

[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.

[how]
Before acquiring dsc to stream resources, first remove it.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index eee19edeeee5c..1e448f1b39a18 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -828,6 +828,9 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 		if (computed_streams[i])
 			continue;
 
+		if (dcn20_remove_stream_from_ctx(stream->ctx->dc, dc_state, stream) != DC_OK)
+			return false;
+
 		mutex_lock(&aconnector->mst_mgr.lock);
 		if (!compute_mst_dsc_configs_for_link(state, dc_state, stream->link)) {
 			mutex_unlock(&aconnector->mst_mgr.lock);
@@ -845,7 +848,8 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 		stream = dc_state->streams[i];
 
 		if (stream->timing.flags.DSC == 1)
-			dc_stream_add_dsc_to_resource(stream->ctx->dc, dc_state, stream);
+			if (dc_stream_add_dsc_to_resource(stream->ctx->dc, dc_state, stream) != DC_OK)
+				return false;
 	}
 
 	return true;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.10 22/36] drm/amd/display: Release DSC before acquiring

[Sasha Levin]

From: Mikita Lipski <mikita.lipski@amd.com>

[ Upstream commit 58180a0cc0c57fe62a799a112f95b60f6935bd96 ]

[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.

[how]
Before acquiring dsc to stream resources, first remove it.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index eee19edeeee5c..1e448f1b39a18 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -828,6 +828,9 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 		if (computed_streams[i])
 			continue;
 
+		if (dcn20_remove_stream_from_ctx(stream->ctx->dc, dc_state, stream) != DC_OK)
+			return false;
+
 		mutex_lock(&aconnector->mst_mgr.lock);
 		if (!compute_mst_dsc_configs_for_link(state, dc_state, stream->link)) {
 			mutex_unlock(&aconnector->mst_mgr.lock);
@@ -845,7 +848,8 @@ bool compute_mst_dsc_configs_for_state(struct drm_atomic_state *state,
 		stream = dc_state->streams[i];
 
 		if (stream->timing.flags.DSC == 1)
-			dc_stream_add_dsc_to_resource(stream->ctx->dc, dc_state, stream);
+			if (dc_stream_add_dsc_to_resource(stream->ctx->dc, dc_state, stream) != DC_OK)
+				return false;
 	}
 
 	return true;
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.10 23/36] drm/amd/display: Fix dc_sink kref count in emulated_link_detect

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 3ddc818d9bb877c64f5c649beab97af86c403702 ]

[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.

[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 0f7749e9424d4..f1fea71a7073c 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1792,8 +1792,8 @@ static void emulated_link_detect(struct dc_link *link)
 	link->type = dc_connection_none;
 	prev_sink = link->local_sink;
 
-	if (prev_sink != NULL)
-		dc_sink_retain(prev_sink);
+	if (prev_sink)
+		dc_sink_release(prev_sink);
 
 	switch (link->connector_signal) {
 	case SIGNAL_TYPE_HDMI_TYPE_A: {
-- 
2.27.0

[PATCH AUTOSEL 5.10 23/36] drm/amd/display: Fix dc_sink kref count in emulated_link_detect

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 3ddc818d9bb877c64f5c649beab97af86c403702 ]

[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.

[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 0f7749e9424d4..f1fea71a7073c 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1792,8 +1792,8 @@ static void emulated_link_detect(struct dc_link *link)
 	link->type = dc_connection_none;
 	prev_sink = link->local_sink;
 
-	if (prev_sink != NULL)
-		dc_sink_retain(prev_sink);
+	if (prev_sink)
+		dc_sink_release(prev_sink);
 
 	switch (link->connector_signal) {
 	case SIGNAL_TYPE_HDMI_TYPE_A: {
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.10 23/36] drm/amd/display: Fix dc_sink kref count in emulated_link_detect

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 3ddc818d9bb877c64f5c649beab97af86c403702 ]

[why]
prev_sink is not used anywhere else in the function and the reference to
it from dc_link is replaced with a new dc_sink.

[how]
Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink).

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 0f7749e9424d4..f1fea71a7073c 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1792,8 +1792,8 @@ static void emulated_link_detect(struct dc_link *link)
 	link->type = dc_connection_none;
 	prev_sink = link->local_sink;
 
-	if (prev_sink != NULL)
-		dc_sink_retain(prev_sink);
+	if (prev_sink)
+		dc_sink_release(prev_sink);
 
 	switch (link->connector_signal) {
 	case SIGNAL_TYPE_HDMI_TYPE_A: {
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.10 24/36] drm/amd/display: Free atomic state after drm_atomic_commit

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 2abaa323d744011982b20b8f3886184d56d23946 ]

[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.

[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index f1fea71a7073c..695a5b83c00f9 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7872,14 +7872,14 @@ static int dm_force_atomic_commit(struct drm_connector *connector)
 
 	ret = PTR_ERR_OR_ZERO(conn_state);
 	if (ret)
-		goto err;
+		goto out;
 
 	/* Attach crtc to drm_atomic_state*/
 	crtc_state = drm_atomic_get_crtc_state(state, &disconnected_acrtc->base);
 
 	ret = PTR_ERR_OR_ZERO(crtc_state);
 	if (ret)
-		goto err;
+		goto out;
 
 	/* force a restore */
 	crtc_state->mode_changed = true;
@@ -7889,17 +7889,15 @@ static int dm_force_atomic_commit(struct drm_connector *connector)
 
 	ret = PTR_ERR_OR_ZERO(plane_state);
 	if (ret)
-		goto err;
-
+		goto out;
 
 	/* Call commit internally with the state we just constructed */
 	ret = drm_atomic_commit(state);
-	if (!ret)
-		return 0;
 
-err:
-	DRM_ERROR("Restoring old state failed with %i\n", ret);
+out:
 	drm_atomic_state_put(state);
+	if (ret)
+		DRM_ERROR("Restoring old state failed with %i\n", ret);
 
 	return ret;
 }
-- 
2.27.0

[PATCH AUTOSEL 5.10 24/36] drm/amd/display: Free atomic state after drm_atomic_commit

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 2abaa323d744011982b20b8f3886184d56d23946 ]

[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.

[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index f1fea71a7073c..695a5b83c00f9 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7872,14 +7872,14 @@ static int dm_force_atomic_commit(struct drm_connector *connector)
 
 	ret = PTR_ERR_OR_ZERO(conn_state);
 	if (ret)
-		goto err;
+		goto out;
 
 	/* Attach crtc to drm_atomic_state*/
 	crtc_state = drm_atomic_get_crtc_state(state, &disconnected_acrtc->base);
 
 	ret = PTR_ERR_OR_ZERO(crtc_state);
 	if (ret)
-		goto err;
+		goto out;
 
 	/* force a restore */
 	crtc_state->mode_changed = true;
@@ -7889,17 +7889,15 @@ static int dm_force_atomic_commit(struct drm_connector *connector)
 
 	ret = PTR_ERR_OR_ZERO(plane_state);
 	if (ret)
-		goto err;
-
+		goto out;
 
 	/* Call commit internally with the state we just constructed */
 	ret = drm_atomic_commit(state);
-	if (!ret)
-		return 0;
 
-err:
-	DRM_ERROR("Restoring old state failed with %i\n", ret);
+out:
 	drm_atomic_state_put(state);
+	if (ret)
+		DRM_ERROR("Restoring old state failed with %i\n", ret);
 
 	return ret;
 }
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.10 24/36] drm/amd/display: Free atomic state after drm_atomic_commit

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 2abaa323d744011982b20b8f3886184d56d23946 ]

[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.

[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index f1fea71a7073c..695a5b83c00f9 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7872,14 +7872,14 @@ static int dm_force_atomic_commit(struct drm_connector *connector)
 
 	ret = PTR_ERR_OR_ZERO(conn_state);
 	if (ret)
-		goto err;
+		goto out;
 
 	/* Attach crtc to drm_atomic_state*/
 	crtc_state = drm_atomic_get_crtc_state(state, &disconnected_acrtc->base);
 
 	ret = PTR_ERR_OR_ZERO(crtc_state);
 	if (ret)
-		goto err;
+		goto out;
 
 	/* force a restore */
 	crtc_state->mode_changed = true;
@@ -7889,17 +7889,15 @@ static int dm_force_atomic_commit(struct drm_connector *connector)
 
 	ret = PTR_ERR_OR_ZERO(plane_state);
 	if (ret)
-		goto err;
-
+		goto out;
 
 	/* Call commit internally with the state we just constructed */
 	ret = drm_atomic_commit(state);
-	if (!ret)
-		return 0;
 
-err:
-	DRM_ERROR("Restoring old state failed with %i\n", ret);
+out:
 	drm_atomic_state_put(state);
+	if (ret)
+		DRM_ERROR("Restoring old state failed with %i\n", ret);
 
 	return ret;
 }
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.10 25/36] drm/amd/display: Decrement refcount of dc_sink before reassignment

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 8e92bb0fa75bca9a57e4aba2e36f67d8016a3053 ]

[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.

[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 695a5b83c00f9..022821334153b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2261,8 +2261,10 @@ void amdgpu_dm_update_connector_after_detect(
 		 * TODO: check if we still need the S3 mode update workaround.
 		 * If yes, put it here.
 		 */
-		if (aconnector->dc_sink)
+		if (aconnector->dc_sink) {
 			amdgpu_dm_update_freesync_caps(connector, NULL);
+			dc_sink_release(aconnector->dc_sink);
+		}
 
 		aconnector->dc_sink = sink;
 		dc_sink_retain(aconnector->dc_sink);
-- 
2.27.0

[PATCH AUTOSEL 5.10 25/36] drm/amd/display: Decrement refcount of dc_sink before reassignment

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 8e92bb0fa75bca9a57e4aba2e36f67d8016a3053 ]

[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.

[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 695a5b83c00f9..022821334153b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2261,8 +2261,10 @@ void amdgpu_dm_update_connector_after_detect(
 		 * TODO: check if we still need the S3 mode update workaround.
 		 * If yes, put it here.
 		 */
-		if (aconnector->dc_sink)
+		if (aconnector->dc_sink) {
 			amdgpu_dm_update_freesync_caps(connector, NULL);
+			dc_sink_release(aconnector->dc_sink);
+		}
 
 		aconnector->dc_sink = sink;
 		dc_sink_retain(aconnector->dc_sink);
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.10 25/36] drm/amd/display: Decrement refcount of dc_sink before reassignment

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit 8e92bb0fa75bca9a57e4aba2e36f67d8016a3053 ]

[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.

[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 695a5b83c00f9..022821334153b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2261,8 +2261,10 @@ void amdgpu_dm_update_connector_after_detect(
 		 * TODO: check if we still need the S3 mode update workaround.
 		 * If yes, put it here.
 		 */
-		if (aconnector->dc_sink)
+		if (aconnector->dc_sink) {
 			amdgpu_dm_update_freesync_caps(connector, NULL);
+			dc_sink_release(aconnector->dc_sink);
+		}
 
 		aconnector->dc_sink = sink;
 		dc_sink_retain(aconnector->dc_sink);
-- 
2.27.0

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.10 26/36] riscv: virt_addr_valid must check the address belongs to linear mapping

[Sasha Levin]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit 2ab543823322b564f205cb15d0f0302803c87d11 ]

virt_addr_valid macro checks that a virtual address is valid, ie that
the address belongs to the linear mapping and that the corresponding
 physical page exists.

Add the missing check that ensures the virtual address belongs to the
linear mapping, otherwise __virt_to_phys, when compiled with
CONFIG_DEBUG_VIRTUAL enabled, raises a WARN that is interpreted as a
kernel bug by syzbot.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/page.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 2d50f76efe481..64a675c5c30ac 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -135,7 +135,10 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x);
 
 #endif /* __ASSEMBLY__ */
 
-#define virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
+#define virt_addr_valid(vaddr)	({						\
+	unsigned long _addr = (unsigned long)vaddr;				\
+	(unsigned long)(_addr) >= PAGE_OFFSET && pfn_valid(virt_to_pfn(_addr));	\
+})
 
 #define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 26/36] riscv: virt_addr_valid must check the address belongs to linear mapping

[Sasha Levin]

From: Alexandre Ghiti <alex@ghiti.fr>

[ Upstream commit 2ab543823322b564f205cb15d0f0302803c87d11 ]

virt_addr_valid macro checks that a virtual address is valid, ie that
the address belongs to the linear mapping and that the corresponding
 physical page exists.

Add the missing check that ensures the virtual address belongs to the
linear mapping, otherwise __virt_to_phys, when compiled with
CONFIG_DEBUG_VIRTUAL enabled, raises a WARN that is interpreted as a
kernel bug by syzbot.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/asm/page.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 2d50f76efe481..64a675c5c30ac 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -135,7 +135,10 @@ extern phys_addr_t __phys_addr_symbol(unsigned long x);
 
 #endif /* __ASSEMBLY__ */
 
-#define virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
+#define virt_addr_valid(vaddr)	({						\
+	unsigned long _addr = (unsigned long)vaddr;				\
+	(unsigned long)(_addr) >= PAGE_OFFSET && pfn_valid(virt_to_pfn(_addr));	\
+})
 
 #define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
-- 
2.27.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH AUTOSEL 5.10 27/36] bfq-iosched: Revert "bfq: Fix computation of shallow depth"

[Sasha Levin]

From: Lin Feng <linf@wangsu.com>

[ Upstream commit 388c705b95f23f317fa43e6abf9ff07b583b721a ]

This reverts commit 6d4d273588378c65915acaf7b2ee74e9dd9c130a.

bfq.limit_depth passes word_depths[] as shallow_depth down to sbitmap core
sbitmap_get_shallow, which uses just the number to limit the scan depth of
each bitmap word, formula:
scan_percentage_for_each_word = shallow_depth / (1 << sbimap->shift) * 100%

That means the comments's percentiles 50%, 75%, 18%, 37% of bfq are correct.
But after commit patch 'bfq: Fix computation of shallow depth', we use
sbitmap.depth instead, as a example in following case:

sbitmap.depth = 256, map_nr = 4, shift = 6; sbitmap_word.depth = 64.
The resulsts of computed bfqd->word_depths[] are {128, 192, 48, 96}, and
three of the numbers exceed core dirver's 'sbitmap_word.depth=64' limit
nothing.

Signed-off-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 9e4eb0fc1c16e..9e81d1052091f 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -6332,13 +6332,13 @@ static unsigned int bfq_update_depths(struct bfq_data *bfqd,
 	 * limit 'something'.
 	 */
 	/* no more than 50% of tags for async I/O */
-	bfqd->word_depths[0][0] = max(bt->sb.depth >> 1, 1U);
+	bfqd->word_depths[0][0] = max((1U << bt->sb.shift) >> 1, 1U);
 	/*
 	 * no more than 75% of tags for sync writes (25% extra tags
 	 * w.r.t. async I/O, to prevent async I/O from starving sync
 	 * writes)
 	 */
-	bfqd->word_depths[0][1] = max((bt->sb.depth * 3) >> 2, 1U);
+	bfqd->word_depths[0][1] = max(((1U << bt->sb.shift) * 3) >> 2, 1U);
 
 	/*
 	 * In-word depths in case some bfq_queue is being weight-
@@ -6348,9 +6348,9 @@ static unsigned int bfq_update_depths(struct bfq_data *bfqd,
 	 * shortage.
 	 */
 	/* no more than ~18% of tags for async I/O */
-	bfqd->word_depths[1][0] = max((bt->sb.depth * 3) >> 4, 1U);
+	bfqd->word_depths[1][0] = max(((1U << bt->sb.shift) * 3) >> 4, 1U);
 	/* no more than ~37% of tags for sync writes (~20% extra tags) */
-	bfqd->word_depths[1][1] = max((bt->sb.depth * 6) >> 4, 1U);
+	bfqd->word_depths[1][1] = max(((1U << bt->sb.shift) * 6) >> 4, 1U);
 
 	for (i = 0; i < 2; i++)
 		for (j = 0; j < 2; j++)
-- 
2.27.0

[PATCH AUTOSEL 5.10 28/36] ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 5638159f6d93b99ec9743ac7f65563fca3cf413d ]

This reverts commit c17e9377aa81664d94b4f2102559fcf2a01ec8e7.

The lpc32xx clock driver is not able to actually change the PLL rate as
this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK,
then stop the PLL, update the register, restart the PLL and wait for the
PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK
PLL.

Currently, the HCLK driver simply updates the registers but this has no
real effect and all the clock rate calculation end up being wrong. This is
especially annoying for the peripheral (e.g. UARTs, I2C, SPI).

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 7b7ec7b1217b8..824393e1bcfb7 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -329,9 +329,6 @@ clk: clock-controller@0 {
 
 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
-
-					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
-					assigned-clock-rates = <208000000>;
 				};
 			};
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 28/36] ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 5638159f6d93b99ec9743ac7f65563fca3cf413d ]

This reverts commit c17e9377aa81664d94b4f2102559fcf2a01ec8e7.

The lpc32xx clock driver is not able to actually change the PLL rate as
this would require reparenting ARM_CLK, DDRAM_CLK, PERIPH_CLK to SYSCLK,
then stop the PLL, update the register, restart the PLL and wait for the
PLL to lock and finally reparent ARM_CLK, DDRAM_CLK, PERIPH_CLK to HCLK
PLL.

Currently, the HCLK driver simply updates the registers but this has no
real effect and all the clock rate calculation end up being wrong. This is
especially annoying for the peripheral (e.g. UARTs, I2C, SPI).

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20210203090320.GA3760268@piout.net'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 7b7ec7b1217b8..824393e1bcfb7 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -329,9 +329,6 @@ clk: clock-controller@0 {
 
 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
-
-					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
-					assigned-clock-rates = <208000000>;
 				};
 			};
 
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 29/36] kallsyms: fix nonconverging kallsyms table with lld

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit efe6e3068067212b85c2d0474b5ee3b2d0c7adab ]

ARM randconfig builds with lld sometimes show a build failure
from kallsyms:

  Inconsistent kallsyms data
  Try make KALLSYMS_EXTRA_PASS=1 as a workaround

The problem is the veneers/thunks getting added by the linker extend
the symbol table, which in turn leads to more veneers being needed,
so it may take a few extra iterations to converge.

This bug has been fixed multiple times before, but comes back every time
a new symbol name is used. lld uses a different set of identifiers from
ld.bfd, so the additional ones need to be added as well.

I looked through the sources and found that arm64 and mips define similar
prefixes, so I'm adding those as well, aside from the ones I observed. I'm
not sure about powerpc64, which seems to already be handled through a
section match, but if it comes back, the "__long_branch_" and "__plt_"
prefixes would have to get added as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kallsyms.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 7ecd2ccba531b..54ad86d137849 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -112,6 +112,12 @@ static bool is_ignored_symbol(const char *name, char type)
 		"__crc_",		/* modversions */
 		"__efistub_",		/* arm64 EFI stub namespace */
 		"__kvm_nvhe_",		/* arm64 non-VHE KVM namespace */
+		"__AArch64ADRPThunk_",	/* arm64 lld */
+		"__ARMV5PILongThunk_",	/* arm lld */
+		"__ARMV7PILongThunk_",
+		"__ThumbV7PILongThunk_",
+		"__LA25Thunk_",		/* mips lld */
+		"__microLA25Thunk_",
 		NULL
 	};
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 30/36] ARM: ensure the signal page contains defined contents

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 9c698bff66ab4914bb3d71da7dc6112519bde23e ]

Ensure that the signal page contains our poison instruction to increase
the protection against ROP attacks and also contains well defined
contents.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/signal.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 585edbfccf6df..2f81d3af5f9af 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -693,18 +693,20 @@ struct page *get_signal_page(void)
 
 	addr = page_address(page);
 
+	/* Poison the entire page */
+	memset32(addr, __opcode_to_mem_arm(0xe7fddef1),
+		 PAGE_SIZE / sizeof(u32));
+
 	/* Give the signal return code some randomness */
 	offset = 0x200 + (get_random_int() & 0x7fc);
 	signal_return_offset = offset;
 
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
+	/* Copy signal return handlers into the page */
 	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
 
-	ptr = (unsigned long)addr + offset;
-	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+	/* Flush out all instructions in this page */
+	ptr = (unsigned long)addr;
+	flush_icache_range(ptr, ptr + PAGE_SIZE);
 
 	return page;
 }
-- 
2.27.0

[PATCH AUTOSEL 5.10 30/36] ARM: ensure the signal page contains defined contents

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 9c698bff66ab4914bb3d71da7dc6112519bde23e ]

Ensure that the signal page contains our poison instruction to increase
the protection against ROP attacks and also contains well defined
contents.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/signal.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 585edbfccf6df..2f81d3af5f9af 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -693,18 +693,20 @@ struct page *get_signal_page(void)
 
 	addr = page_address(page);
 
+	/* Poison the entire page */
+	memset32(addr, __opcode_to_mem_arm(0xe7fddef1),
+		 PAGE_SIZE / sizeof(u32));
+
 	/* Give the signal return code some randomness */
 	offset = 0x200 + (get_random_int() & 0x7fc);
 	signal_return_offset = offset;
 
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
+	/* Copy signal return handlers into the page */
 	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
 
-	ptr = (unsigned long)addr + offset;
-	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+	/* Flush out all instructions in this page */
+	ptr = (unsigned long)addr;
+	flush_icache_range(ptr, ptr + PAGE_SIZE);
 
 	return page;
 }
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 31/36] ARM: kexec: fix oops after TLB are invalidated

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 4d62e81b60d4025e2dfcd5ea531cc1394ce9226f ]

Giancarlo Ferrari reports the following oops while trying to use kexec:

 Unable to handle kernel paging request at virtual address 80112f38
 pgd = fd7ef03e
 [80112f38] *pgd=0001141e(bad)
 Internal error: Oops: 80d [#1] PREEMPT SMP ARM
 ...

This is caused by machine_kexec() trying to set the kernel text to be
read/write, so it can poke values into the relocation code before
copying it - and an interrupt occuring which changes the page tables.
The subsequent writes then hit read-only sections that trigger a
data abort resulting in the above oops.

Fix this by copying the relocation code, and then writing the variables
into the destination, thereby avoiding the need to make the kernel text
read/write.

Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/kexec-internal.h | 12 +++++++++
 arch/arm/kernel/asm-offsets.c         |  5 ++++
 arch/arm/kernel/machine_kexec.c       | 20 ++++++--------
 arch/arm/kernel/relocate_kernel.S     | 38 ++++++++-------------------
 4 files changed, 36 insertions(+), 39 deletions(-)
 create mode 100644 arch/arm/include/asm/kexec-internal.h

diff --git a/arch/arm/include/asm/kexec-internal.h b/arch/arm/include/asm/kexec-internal.h
new file mode 100644
index 0000000000000..ecc2322db7aa1
--- /dev/null
+++ b/arch/arm/include/asm/kexec-internal.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARM_KEXEC_INTERNAL_H
+#define _ARM_KEXEC_INTERNAL_H
+
+struct kexec_relocate_data {
+	unsigned long kexec_start_address;
+	unsigned long kexec_indirection_page;
+	unsigned long kexec_mach_type;
+	unsigned long kexec_r2;
+};
+
+#endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index a1570c8bab25a..be8050b0c3dfb 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/mach/arch.h>
@@ -170,5 +171,9 @@ int main(void)
   DEFINE(MPU_RGN_PRBAR,	offsetof(struct mpu_rgn, prbar));
   DEFINE(MPU_RGN_PRLAR,	offsetof(struct mpu_rgn, prlar));
 #endif
+  DEFINE(KEXEC_START_ADDR,	offsetof(struct kexec_relocate_data, kexec_start_address));
+  DEFINE(KEXEC_INDIR_PAGE,	offsetof(struct kexec_relocate_data, kexec_indirection_page));
+  DEFINE(KEXEC_MACH_TYPE,	offsetof(struct kexec_relocate_data, kexec_mach_type));
+  DEFINE(KEXEC_R2,		offsetof(struct kexec_relocate_data, kexec_r2));
   return 0; 
 }
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 5d84ad333f050..2b09dad7935eb 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/of_fdt.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/fncpy.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
@@ -22,11 +23,6 @@
 extern void relocate_new_kernel(void);
 extern const unsigned int relocate_new_kernel_size;
 
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
-extern unsigned long kexec_mach_type;
-extern unsigned long kexec_boot_atags;
-
 static atomic_t waiting_for_crash_ipi;
 
 /*
@@ -159,6 +155,7 @@ void (*kexec_reinit)(void);
 void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list, reboot_entry_phys;
+	struct kexec_relocate_data *data;
 	void (*reboot_entry)(void);
 	void *reboot_code_buffer;
 
@@ -174,18 +171,17 @@ void machine_kexec(struct kimage *image)
 
 	reboot_code_buffer = page_address(image->control_code_page);
 
-	/* Prepare parameters for reboot_code_buffer*/
-	set_kernel_text_rw();
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->arch.kernel_r2;
-
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,
 			     &relocate_new_kernel,
 			     relocate_new_kernel_size);
 
+	data = reboot_code_buffer + relocate_new_kernel_size;
+	data->kexec_start_address = image->start;
+	data->kexec_indirection_page = page_list;
+	data->kexec_mach_type = machine_arch_type;
+	data->kexec_r2 = image->arch.kernel_r2;
+
 	/* get the identity mapping physical address for the reboot code */
 	reboot_entry_phys = virt_to_idmap(reboot_entry);
 
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 72a08786e16eb..218d524360fcd 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -5,14 +5,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/asm-offsets.h>
 #include <asm/kexec.h>
 
 	.align	3	/* not needed for this code, but keeps fncpy() happy */
 
 ENTRY(relocate_new_kernel)
 
-	ldr	r0,kexec_indirection_page
-	ldr	r1,kexec_start_address
+	adr	r7, relocate_new_kernel_end
+	ldr	r0, [r7, #KEXEC_INDIR_PAGE]
+	ldr	r1, [r7, #KEXEC_START_ADDR]
 
 	/*
 	 * If there is no indirection page (we are doing crashdumps)
@@ -57,34 +59,16 @@ ENTRY(relocate_new_kernel)
 
 2:
 	/* Jump to relocated kernel */
-	mov lr,r1
-	mov r0,#0
-	ldr r1,kexec_mach_type
-	ldr r2,kexec_boot_atags
- ARM(	ret lr	)
- THUMB(	bx lr		)
-
-	.align
-
-	.globl kexec_start_address
-kexec_start_address:
-	.long	0x0
-
-	.globl kexec_indirection_page
-kexec_indirection_page:
-	.long	0x0
-
-	.globl kexec_mach_type
-kexec_mach_type:
-	.long	0x0
-
-	/* phy addr of the atags for the new kernel */
-	.globl kexec_boot_atags
-kexec_boot_atags:
-	.long	0x0
+	mov	lr, r1
+	mov	r0, #0
+	ldr	r1, [r7, #KEXEC_MACH_TYPE]
+	ldr	r2, [r7, #KEXEC_R2]
+ ARM(	ret	lr	)
+ THUMB(	bx	lr	)
 
 ENDPROC(relocate_new_kernel)
 
+	.align	3
 relocate_new_kernel_end:
 
 	.globl relocate_new_kernel_size
-- 
2.27.0

[PATCH AUTOSEL 5.10 31/36] ARM: kexec: fix oops after TLB are invalidated

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 4d62e81b60d4025e2dfcd5ea531cc1394ce9226f ]

Giancarlo Ferrari reports the following oops while trying to use kexec:

 Unable to handle kernel paging request at virtual address 80112f38
 pgd = fd7ef03e
 [80112f38] *pgd=0001141e(bad)
 Internal error: Oops: 80d [#1] PREEMPT SMP ARM
 ...

This is caused by machine_kexec() trying to set the kernel text to be
read/write, so it can poke values into the relocation code before
copying it - and an interrupt occuring which changes the page tables.
The subsequent writes then hit read-only sections that trigger a
data abort resulting in the above oops.

Fix this by copying the relocation code, and then writing the variables
into the destination, thereby avoiding the need to make the kernel text
read/write.

Reported-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Tested-by: Giancarlo Ferrari <giancarlo.ferrari89@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/kexec-internal.h | 12 +++++++++
 arch/arm/kernel/asm-offsets.c         |  5 ++++
 arch/arm/kernel/machine_kexec.c       | 20 ++++++--------
 arch/arm/kernel/relocate_kernel.S     | 38 ++++++++-------------------
 4 files changed, 36 insertions(+), 39 deletions(-)
 create mode 100644 arch/arm/include/asm/kexec-internal.h

diff --git a/arch/arm/include/asm/kexec-internal.h b/arch/arm/include/asm/kexec-internal.h
new file mode 100644
index 0000000000000..ecc2322db7aa1
--- /dev/null
+++ b/arch/arm/include/asm/kexec-internal.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARM_KEXEC_INTERNAL_H
+#define _ARM_KEXEC_INTERNAL_H
+
+struct kexec_relocate_data {
+	unsigned long kexec_start_address;
+	unsigned long kexec_indirection_page;
+	unsigned long kexec_mach_type;
+	unsigned long kexec_r2;
+};
+
+#endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index a1570c8bab25a..be8050b0c3dfb 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/mach/arch.h>
@@ -170,5 +171,9 @@ int main(void)
   DEFINE(MPU_RGN_PRBAR,	offsetof(struct mpu_rgn, prbar));
   DEFINE(MPU_RGN_PRLAR,	offsetof(struct mpu_rgn, prlar));
 #endif
+  DEFINE(KEXEC_START_ADDR,	offsetof(struct kexec_relocate_data, kexec_start_address));
+  DEFINE(KEXEC_INDIR_PAGE,	offsetof(struct kexec_relocate_data, kexec_indirection_page));
+  DEFINE(KEXEC_MACH_TYPE,	offsetof(struct kexec_relocate_data, kexec_mach_type));
+  DEFINE(KEXEC_R2,		offsetof(struct kexec_relocate_data, kexec_r2));
   return 0; 
 }
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 5d84ad333f050..2b09dad7935eb 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/of_fdt.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/fncpy.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
@@ -22,11 +23,6 @@
 extern void relocate_new_kernel(void);
 extern const unsigned int relocate_new_kernel_size;
 
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
-extern unsigned long kexec_mach_type;
-extern unsigned long kexec_boot_atags;
-
 static atomic_t waiting_for_crash_ipi;
 
 /*
@@ -159,6 +155,7 @@ void (*kexec_reinit)(void);
 void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list, reboot_entry_phys;
+	struct kexec_relocate_data *data;
 	void (*reboot_entry)(void);
 	void *reboot_code_buffer;
 
@@ -174,18 +171,17 @@ void machine_kexec(struct kimage *image)
 
 	reboot_code_buffer = page_address(image->control_code_page);
 
-	/* Prepare parameters for reboot_code_buffer*/
-	set_kernel_text_rw();
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->arch.kernel_r2;
-
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,
 			     &relocate_new_kernel,
 			     relocate_new_kernel_size);
 
+	data = reboot_code_buffer + relocate_new_kernel_size;
+	data->kexec_start_address = image->start;
+	data->kexec_indirection_page = page_list;
+	data->kexec_mach_type = machine_arch_type;
+	data->kexec_r2 = image->arch.kernel_r2;
+
 	/* get the identity mapping physical address for the reboot code */
 	reboot_entry_phys = virt_to_idmap(reboot_entry);
 
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 72a08786e16eb..218d524360fcd 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -5,14 +5,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/asm-offsets.h>
 #include <asm/kexec.h>
 
 	.align	3	/* not needed for this code, but keeps fncpy() happy */
 
 ENTRY(relocate_new_kernel)
 
-	ldr	r0,kexec_indirection_page
-	ldr	r1,kexec_start_address
+	adr	r7, relocate_new_kernel_end
+	ldr	r0, [r7, #KEXEC_INDIR_PAGE]
+	ldr	r1, [r7, #KEXEC_START_ADDR]
 
 	/*
 	 * If there is no indirection page (we are doing crashdumps)
@@ -57,34 +59,16 @@ ENTRY(relocate_new_kernel)
 
 2:
 	/* Jump to relocated kernel */
-	mov lr,r1
-	mov r0,#0
-	ldr r1,kexec_mach_type
-	ldr r2,kexec_boot_atags
- ARM(	ret lr	)
- THUMB(	bx lr		)
-
-	.align
-
-	.globl kexec_start_address
-kexec_start_address:
-	.long	0x0
-
-	.globl kexec_indirection_page
-kexec_indirection_page:
-	.long	0x0
-
-	.globl kexec_mach_type
-kexec_mach_type:
-	.long	0x0
-
-	/* phy addr of the atags for the new kernel */
-	.globl kexec_boot_atags
-kexec_boot_atags:
-	.long	0x0
+	mov	lr, r1
+	mov	r0, #0
+	ldr	r1, [r7, #KEXEC_MACH_TYPE]
+	ldr	r2, [r7, #KEXEC_R2]
+ ARM(	ret	lr	)
+ THUMB(	bx	lr	)
 
 ENDPROC(relocate_new_kernel)
 
+	.align	3
 relocate_new_kernel_end:
 
 	.globl relocate_new_kernel_size
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 32/36] init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcov

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 55b6f763d8bcb5546997933105d66d3e6b080e6a ]

On ARCH=um, loading a module doesn't result in its constructors getting
called, which breaks module gcov since the debugfs files are never
registered.  On the other hand, in-kernel constructors have already been
called by the dynamic linker, so we can't call them again.

Get out of this conundrum by allowing CONFIG_CONSTRUCTORS to be
selected, but avoiding the in-kernel constructor calls.

Also remove the "if !UML" from GCOV selecting CONSTRUCTORS now, since we
really do want CONSTRUCTORS, just not kernel binary ones.

Link: https://lkml.kernel.org/r/20210120172041.c246a2cac2fb.I1358f584b76f1898373adfed77f4462c8705b736@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 init/Kconfig        | 1 -
 init/main.c         | 8 +++++++-
 kernel/gcov/Kconfig | 2 +-
 3 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index 0872a5a2e7590..481a2131e9d7e 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -76,7 +76,6 @@ config CC_HAS_ASM_INLINE
 
 config CONSTRUCTORS
 	bool
-	depends on !UML
 
 config IRQ_WORK
 	bool
diff --git a/init/main.c b/init/main.c
index 9d964511fe0c2..46bfa26f252e8 100644
--- a/init/main.c
+++ b/init/main.c
@@ -1066,7 +1066,13 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
 /* Call all constructor functions linked into the kernel. */
 static void __init do_ctors(void)
 {
-#ifdef CONFIG_CONSTRUCTORS
+/*
+ * For UML, the constructors have already been called by the
+ * normal setup code as it's just a normal ELF binary, so we
+ * cannot do it again - but we do need CONFIG_CONSTRUCTORS
+ * even on UML for modules.
+ */
+#if defined(CONFIG_CONSTRUCTORS) && !defined(CONFIG_UML)
 	ctor_fn_t *fn = (ctor_fn_t *) __ctors_start;
 
 	for (; fn < (ctor_fn_t *) __ctors_end; fn++)
diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 3110c77230c7f..f62de2dea8a31 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -4,7 +4,7 @@ menu "GCOV-based kernel profiling"
 config GCOV_KERNEL
 	bool "Enable gcov-based kernel profiling"
 	depends on DEBUG_FS
-	select CONSTRUCTORS if !UML
+	select CONSTRUCTORS
 	default n
 	help
 	This option enables gcov-based code profiling (e.g. for code coverage
-- 
2.27.0

[PATCH AUTOSEL 5.10 33/36] kasan: add explicit preconditions to kasan_report()

[Sasha Levin]

From: Vincenzo Frascino <vincenzo.frascino@arm.com>

[ Upstream commit 49c6631d3b4f61a7b5bb0453a885a12bfa06ffd8 ]

Patch series "kasan: Fix metadata detection for KASAN_HW_TAGS", v5.

With the introduction of KASAN_HW_TAGS, kasan_report() currently assumes
that every location in memory has valid metadata associated.  This is
due to the fact that addr_has_metadata() returns always true.

As a consequence of this, an invalid address (e.g.  NULL pointer
address) passed to kasan_report() when KASAN_HW_TAGS is enabled, leads
to a kernel panic.

Example below, based on arm64:

   BUG: KASAN: invalid-access in 0x0
   Read at addr 0000000000000000 by task swapper/0/1
   Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
   Mem abort info:
     ESR = 0x96000004
     EC = 0x25: DABT (current EL), IL = 32 bits
     SET = 0, FnV = 0
     EA = 0, S1PTW = 0
   Data abort info:
     ISV = 0, ISS = 0x00000004
     CM = 0, WnR = 0

  ...

   Call trace:
    mte_get_mem_tag+0x24/0x40
    kasan_report+0x1a4/0x410
    alsa_sound_last_init+0x8c/0xa4
    do_one_initcall+0x50/0x1b0
    kernel_init_freeable+0x1d4/0x23c
    kernel_init+0x14/0x118
    ret_from_fork+0x10/0x34
   Code: d65f03c0 9000f021 f9428021 b6cfff61 (d9600000)
   ---[ end trace 377c8bb45bdd3a1a ]---
   hrtimer: interrupt took 48694256 ns
   note: swapper/0[1] exited with preempt_count 1
   Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
   SMP: stopping secondary CPUs
   Kernel Offset: 0x35abaf140000 from 0xffff800010000000
   PHYS_OFFSET: 0x40000000
   CPU features: 0x0a7e0152,61c0a030
   Memory Limit: none
   ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

This series fixes the behavior of addr_has_metadata() that now returns
true only when the address is valid.

This patch (of 2):

With the introduction of KASAN_HW_TAGS, kasan_report() accesses the
metadata only when addr_has_metadata() succeeds.

Add a comment to make sure that the preconditions to the function are
explicitly clarified.

Link: https://lkml.kernel.org/r/20210126134409.47894-1-vincenzo.frascino@arm.com
Link: https://lkml.kernel.org/r/20210126134409.47894-2-vincenzo.frascino@arm.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/kasan.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/include/linux/kasan.h b/include/linux/kasan.h
index 30d343b4a40a5..646fa165d2cce 100644
--- a/include/linux/kasan.h
+++ b/include/linux/kasan.h
@@ -196,6 +196,13 @@ void kasan_init_tags(void);
 
 void *kasan_reset_tag(const void *addr);
 
+/**
+ * kasan_report - print a report about a bad memory access detected by KASAN
+ * @addr: address of the bad access
+ * @size: size of the bad access
+ * @is_write: whether the bad access is a write or a read
+ * @ip: instruction pointer for the accessibility check or the bad access itself
+ */
 bool kasan_report(unsigned long addr, size_t size,
 		bool is_write, unsigned long ip);
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 34/36] ubsan: implement __ubsan_handle_alignment_assumption

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 28abcc963149e06d956d95a18a85f4ba26af746f ]

When building ARCH=mips 32r2el_defconfig with CONFIG_UBSAN_ALIGNMENT:

  ld.lld: error: undefined symbol: __ubsan_handle_alignment_assumption
     referenced by slab.h:557 (include/linux/slab.h:557)
                   main.o:(do_initcalls) in archive init/built-in.a
     referenced by slab.h:448 (include/linux/slab.h:448)
                   do_mounts_rd.o:(rd_load_image) in archive init/built-in.a
     referenced by slab.h:448 (include/linux/slab.h:448)
                   do_mounts_rd.o:(identify_ramdisk_image) in archive init/built-in.a
     referenced 1579 more times

Implement this for the kernel based on LLVM's
handleAlignmentAssumptionImpl because the kernel is not linked against
the compiler runtime.

Link: https://github.com/ClangBuiltLinux/linux/issues/1245
Link: https://github.com/llvm/llvm-project/blob/llvmorg-11.0.1/compiler-rt/lib/ubsan/ubsan_handlers.cpp#L151-L190
Link: https://lkml.kernel.org/r/20210127224451.2587372-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/ubsan.c | 31 +++++++++++++++++++++++++++++++
 lib/ubsan.h |  6 ++++++
 2 files changed, 37 insertions(+)

diff --git a/lib/ubsan.c b/lib/ubsan.c
index cb9af3f6b77e3..adf8dcf3c84e6 100644
--- a/lib/ubsan.c
+++ b/lib/ubsan.c
@@ -427,3 +427,34 @@ void __ubsan_handle_load_invalid_value(void *_data, void *val)
 	ubsan_epilogue();
 }
 EXPORT_SYMBOL(__ubsan_handle_load_invalid_value);
+
+void __ubsan_handle_alignment_assumption(void *_data, unsigned long ptr,
+					 unsigned long align,
+					 unsigned long offset);
+void __ubsan_handle_alignment_assumption(void *_data, unsigned long ptr,
+					 unsigned long align,
+					 unsigned long offset)
+{
+	struct alignment_assumption_data *data = _data;
+	unsigned long real_ptr;
+
+	if (suppress_report(&data->location))
+		return;
+
+	ubsan_prologue(&data->location, "alignment-assumption");
+
+	if (offset)
+		pr_err("assumption of %lu byte alignment (with offset of %lu byte) for pointer of type %s failed",
+		       align, offset, data->type->type_name);
+	else
+		pr_err("assumption of %lu byte alignment for pointer of type %s failed",
+		       align, data->type->type_name);
+
+	real_ptr = ptr - offset;
+	pr_err("%saddress is %lu aligned, misalignment offset is %lu bytes",
+	       offset ? "offset " : "", BIT(real_ptr ? __ffs(real_ptr) : 0),
+	       real_ptr & (align - 1));
+
+	ubsan_epilogue();
+}
+EXPORT_SYMBOL(__ubsan_handle_alignment_assumption);
diff --git a/lib/ubsan.h b/lib/ubsan.h
index 7b56c09473a98..9a0b71c5ff9fb 100644
--- a/lib/ubsan.h
+++ b/lib/ubsan.h
@@ -78,6 +78,12 @@ struct invalid_value_data {
 	struct type_descriptor *type;
 };
 
+struct alignment_assumption_data {
+	struct source_location location;
+	struct source_location assumption_location;
+	struct type_descriptor *type;
+};
+
 #if defined(CONFIG_ARCH_SUPPORTS_INT128)
 typedef __int128 s_max;
 typedef unsigned __int128 u_max;
-- 
2.27.0

[PATCH AUTOSEL 5.10 35/36] Revert "lib: Restrict cpumask_local_spread to houskeeping CPUs"

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 2452483d9546de1c540f330469dc4042ff089731 ]

This reverts commit 1abdfe706a579a702799fce465bceb9fb01d407c.

This change is broken and not solving any problem it claims to solve.

Robin reported that cpumask_local_spread() now returns any cpu out of
cpu_possible_mask in case that NOHZ_FULL is disabled (runtime or compile
time). It can also return any offline or not-present CPU in the
housekeeping mask. Before that it was returning a CPU out of
online_cpu_mask.

While the function is racy against CPU hotplug if the caller does not
protect against it, the actual use cases are not caring much about it as
they use it mostly as hint for:

 - the user space affinity hint which is unused by the kernel
 - memory node selection which is just suboptimal
 - network queue affinity which might fail but is handled gracefully

But the occasional fail vs. hotplug is very different from returning
anything from possible_cpu_mask which can have a large amount of offline
CPUs obviously.

The changelog of the commit claims:

 "The current implementation of cpumask_local_spread() does not respect
  the isolated CPUs, i.e., even if a CPU has been isolated for Real-Time
  task, it will return it to the caller for pinning of its IRQ
  threads. Having these unwanted IRQ threads on an isolated CPU adds up
  to a latency overhead."

The only correct part of this changelog is:

 "The current implementation of cpumask_local_spread() does not respect
  the isolated CPUs."

Everything else is just disjunct from reality.

Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: abelits@marvell.com
Cc: davem@davemloft.net
Link: https://lore.kernel.org/r/87y2g26tnt.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/cpumask.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/lib/cpumask.c b/lib/cpumask.c
index 85da6ab4fbb5a..fb22fb266f937 100644
--- a/lib/cpumask.c
+++ b/lib/cpumask.c
@@ -6,7 +6,6 @@
 #include <linux/export.h>
 #include <linux/memblock.h>
 #include <linux/numa.h>
-#include <linux/sched/isolation.h>
 
 /**
  * cpumask_next - get the next cpu in a cpumask
@@ -206,27 +205,22 @@ void __init free_bootmem_cpumask_var(cpumask_var_t mask)
  */
 unsigned int cpumask_local_spread(unsigned int i, int node)
 {
-	int cpu, hk_flags;
-	const struct cpumask *mask;
+	int cpu;
 
-	hk_flags = HK_FLAG_DOMAIN | HK_FLAG_MANAGED_IRQ;
-	mask = housekeeping_cpumask(hk_flags);
 	/* Wrap: we always want a cpu. */
-	i %= cpumask_weight(mask);
+	i %= num_online_cpus();
 
 	if (node == NUMA_NO_NODE) {
-		for_each_cpu(cpu, mask) {
+		for_each_cpu(cpu, cpu_online_mask)
 			if (i-- == 0)
 				return cpu;
-		}
 	} else {
 		/* NUMA first. */
-		for_each_cpu_and(cpu, cpumask_of_node(node), mask) {
+		for_each_cpu_and(cpu, cpumask_of_node(node), cpu_online_mask)
 			if (i-- == 0)
 				return cpu;
-		}
 
-		for_each_cpu(cpu, mask) {
+		for_each_cpu(cpu, cpu_online_mask) {
 			/* Skip NUMA nodes, done above. */
 			if (cpumask_test_cpu(cpu, cpumask_of_node(node)))
 				continue;
-- 
2.27.0

[PATCH AUTOSEL 5.10 36/36] x86/efi: Remove EFI PGD build time checks

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 816ef8d7a2c4182e19bc06ab65751cb9e3951e94 ]

With CONFIG_X86_5LEVEL, CONFIG_UBSAN and CONFIG_UBSAN_UNSIGNED_OVERFLOW
enabled, clang fails the build with

  x86_64-linux-ld: arch/x86/platform/efi/efi_64.o: in function `efi_sync_low_kernel_mappings':
  efi_64.c:(.text+0x22c): undefined reference to `__compiletime_assert_354'

which happens due to -fsanitize=unsigned-integer-overflow being enabled:

  -fsanitize=unsigned-integer-overflow: Unsigned integer overflow, where
  the result of an unsigned integer computation cannot be represented
  in its type. Unlike signed integer overflow, this is not undefined
  behavior, but it is often unintentional. This sanitizer does not check
  for lossy implicit conversions performed before such a computation
  (see -fsanitize=implicit-conversion).

and that fires when the (intentional) EFI_VA_START/END defines overflow
an unsigned long, leading to the assertion expressions not getting
optimized away (on GCC they do)...

However, those checks are superfluous: the runtime services mapping
code already makes sure the ranges don't overshoot EFI_VA_END as the
EFI mapping range is hardcoded. On each runtime services call, it is
switched to the EFI-specific PGD and even if mappings manage to escape
that last PGD, this won't remain unnoticed for long.

So rip them out.

See https://github.com/ClangBuiltLinux/linux/issues/256 for more info.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: http://lkml.kernel.org/r/20210107223424.4135538-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/platform/efi/efi_64.c | 19 -------------------
 1 file changed, 19 deletions(-)

diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index e1e8d4e3a2139..8efd003540cae 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -115,31 +115,12 @@ void efi_sync_low_kernel_mappings(void)
 	pud_t *pud_k, *pud_efi;
 	pgd_t *efi_pgd = efi_mm.pgd;
 
-	/*
-	 * We can share all PGD entries apart from the one entry that
-	 * covers the EFI runtime mapping space.
-	 *
-	 * Make sure the EFI runtime region mappings are guaranteed to
-	 * only span a single PGD entry and that the entry also maps
-	 * other important kernel regions.
-	 */
-	MAYBE_BUILD_BUG_ON(pgd_index(EFI_VA_END) != pgd_index(MODULES_END));
-	MAYBE_BUILD_BUG_ON((EFI_VA_START & PGDIR_MASK) !=
-			(EFI_VA_END & PGDIR_MASK));
-
 	pgd_efi = efi_pgd + pgd_index(PAGE_OFFSET);
 	pgd_k = pgd_offset_k(PAGE_OFFSET);
 
 	num_entries = pgd_index(EFI_VA_END) - pgd_index(PAGE_OFFSET);
 	memcpy(pgd_efi, pgd_k, sizeof(pgd_t) * num_entries);
 
-	/*
-	 * As with PGDs, we share all P4D entries apart from the one entry
-	 * that covers the EFI runtime mapping space.
-	 */
-	BUILD_BUG_ON(p4d_index(EFI_VA_END) != p4d_index(MODULES_END));
-	BUILD_BUG_ON((EFI_VA_START & P4D_MASK) != (EFI_VA_END & P4D_MASK));
-
 	pgd_efi = efi_pgd + pgd_index(EFI_VA_END);
 	pgd_k = pgd_offset_k(EFI_VA_END);
 	p4d_efi = p4d_offset(pgd_efi, 0);
-- 
2.27.0

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Hans Verkuil]

On 08/02/2021 18:57, Sasha Levin wrote:
> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> 
> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
> 
> Each entry in the array is a 20 bits value composed of 16 bits unsigned
> integer and 4 bits fractional part. So the type should change to __u32.
> In addition add a documentation of how the measurements are done.

Dafna, Helen, does it make sense at all to backport these three patches to
when rkisp1 was a staging driver?

I would be inclined not to backport this.

Regards,

	Hans

> 
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> Acked-by: Helen Koike <helen.koike@collabora.com>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/staging/media/rkisp1/uapi/rkisp1-config.h | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
> index 432cb6be55b47..c19fe059c2442 100644
> --- a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
> +++ b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
> @@ -848,13 +848,18 @@ struct rkisp1_cif_isp_af_stat {
>  /**
>   * struct rkisp1_cif_isp_hist_stat - statistics histogram data
>   *
> - * @hist_bins: measured bin counters
> + * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point
> + *	       type. Bits 0-4 are the fractional part and bits 5-19 are the
> + *	       integer part.
>   *
> - * Measurement window divided into 25 sub-windows, set
> - * with ISP_HIST_XXX
> + * The window of the measurements area is divided to 5x5 sub-windows. The
> + * histogram is then computed for each sub-window independently and the final
> + * result is a weighted average of the histogram measurements on all
> + * sub-windows. The window of the measurements area and the weight of each
> + * sub-window are configurable using struct @rkisp1_cif_isp_hst_config.
>   */
>  struct rkisp1_cif_isp_hist_stat {
> -	__u16 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
> +	__u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
>  };
>  
>  /**
> 

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Hans Verkuil]

On 08/02/2021 18:57, Sasha Levin wrote:
> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> 
> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
> 
> Each entry in the array is a 20 bits value composed of 16 bits unsigned
> integer and 4 bits fractional part. So the type should change to __u32.
> In addition add a documentation of how the measurements are done.

Dafna, Helen, does it make sense at all to backport these three patches to
when rkisp1 was a staging driver?

I would be inclined not to backport this.

Regards,

	Hans

> 
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> Acked-by: Helen Koike <helen.koike@collabora.com>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/staging/media/rkisp1/uapi/rkisp1-config.h | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
> index 432cb6be55b47..c19fe059c2442 100644
> --- a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
> +++ b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
> @@ -848,13 +848,18 @@ struct rkisp1_cif_isp_af_stat {
>  /**
>   * struct rkisp1_cif_isp_hist_stat - statistics histogram data
>   *
> - * @hist_bins: measured bin counters
> + * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point
> + *	       type. Bits 0-4 are the fractional part and bits 5-19 are the
> + *	       integer part.
>   *
> - * Measurement window divided into 25 sub-windows, set
> - * with ISP_HIST_XXX
> + * The window of the measurements area is divided to 5x5 sub-windows. The
> + * histogram is then computed for each sub-window independently and the final
> + * result is a weighted average of the histogram measurements on all
> + * sub-windows. The window of the measurements area and the weight of each
> + * sub-window are configurable using struct @rkisp1_cif_isp_hst_config.
>   */
>  struct rkisp1_cif_isp_hist_stat {
> -	__u16 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
> +	__u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
>  };
>  
>  /**
> 

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Dafna Hirschfeld]

Am 08.02.21 um 21:46 schrieb Hans Verkuil:
> On 08/02/2021 18:57, Sasha Levin wrote:
>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>
>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
>>
>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
>> integer and 4 bits fractional part. So the type should change to __u32.
>> In addition add a documentation of how the measurements are done.
> 
> Dafna, Helen, does it make sense at all to backport these three patches to
> when rkisp1 was a staging driver?
> 
> I would be inclined not to backport this.

I also don't think it makes sense since this changes the uapi and it is not really a bug fix.


Thanks,
Dafna

> 
> Regards,
> 
> 	Hans
> 
>>
>> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>> Acked-by: Helen Koike <helen.koike@collabora.com>
>> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
>> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>   drivers/staging/media/rkisp1/uapi/rkisp1-config.h | 13 +++++++++----
>>   1 file changed, 9 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
>> index 432cb6be55b47..c19fe059c2442 100644
>> --- a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
>> +++ b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
>> @@ -848,13 +848,18 @@ struct rkisp1_cif_isp_af_stat {
>>   /**
>>    * struct rkisp1_cif_isp_hist_stat - statistics histogram data
>>    *
>> - * @hist_bins: measured bin counters
>> + * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point
>> + *	       type. Bits 0-4 are the fractional part and bits 5-19 are the
>> + *	       integer part.
>>    *
>> - * Measurement window divided into 25 sub-windows, set
>> - * with ISP_HIST_XXX
>> + * The window of the measurements area is divided to 5x5 sub-windows. The
>> + * histogram is then computed for each sub-window independently and the final
>> + * result is a weighted average of the histogram measurements on all
>> + * sub-windows. The window of the measurements area and the weight of each
>> + * sub-window are configurable using struct @rkisp1_cif_isp_hst_config.
>>    */
>>   struct rkisp1_cif_isp_hist_stat {
>> -	__u16 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
>> +	__u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
>>   };
>>   
>>   /**
>>
> 

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Dafna Hirschfeld]

Am 08.02.21 um 21:46 schrieb Hans Verkuil:
> On 08/02/2021 18:57, Sasha Levin wrote:
>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>
>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
>>
>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
>> integer and 4 bits fractional part. So the type should change to __u32.
>> In addition add a documentation of how the measurements are done.
> 
> Dafna, Helen, does it make sense at all to backport these three patches to
> when rkisp1 was a staging driver?
> 
> I would be inclined not to backport this.

I also don't think it makes sense since this changes the uapi and it is not really a bug fix.


Thanks,
Dafna

> 
> Regards,
> 
> 	Hans
> 
>>
>> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>> Acked-by: Helen Koike <helen.koike@collabora.com>
>> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
>> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>   drivers/staging/media/rkisp1/uapi/rkisp1-config.h | 13 +++++++++----
>>   1 file changed, 9 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
>> index 432cb6be55b47..c19fe059c2442 100644
>> --- a/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
>> +++ b/drivers/staging/media/rkisp1/uapi/rkisp1-config.h
>> @@ -848,13 +848,18 @@ struct rkisp1_cif_isp_af_stat {
>>   /**
>>    * struct rkisp1_cif_isp_hist_stat - statistics histogram data
>>    *
>> - * @hist_bins: measured bin counters
>> + * @hist_bins: measured bin counters. Each bin is a 20 bits unsigned fixed point
>> + *	       type. Bits 0-4 are the fractional part and bits 5-19 are the
>> + *	       integer part.
>>    *
>> - * Measurement window divided into 25 sub-windows, set
>> - * with ISP_HIST_XXX
>> + * The window of the measurements area is divided to 5x5 sub-windows. The
>> + * histogram is then computed for each sub-window independently and the final
>> + * result is a weighted average of the histogram measurements on all
>> + * sub-windows. The window of the measurements area and the weight of each
>> + * sub-window are configurable using struct @rkisp1_cif_isp_hst_config.
>>    */
>>   struct rkisp1_cif_isp_hist_stat {
>> -	__u16 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
>> +	__u32 hist_bins[RKISP1_CIF_ISP_HIST_BIN_N_MAX];
>>   };
>>   
>>   /**
>>
> 
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Greg Kroah-Hartman]

On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
> 
> 
> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
> > On 08/02/2021 18:57, Sasha Levin wrote:
> > > From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > > 
> > > [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
> > > 
> > > Each entry in the array is a 20 bits value composed of 16 bits unsigned
> > > integer and 4 bits fractional part. So the type should change to __u32.
> > > In addition add a documentation of how the measurements are done.
> > 
> > Dafna, Helen, does it make sense at all to backport these three patches to
> > when rkisp1 was a staging driver?
> > 
> > I would be inclined not to backport this.
> 
> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.

Why was it ok to change the uapi in a newer kernel and not an older one?

thanks,

greg k-h

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Greg Kroah-Hartman]

On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
> 
> 
> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
> > On 08/02/2021 18:57, Sasha Levin wrote:
> > > From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> > > 
> > > [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
> > > 
> > > Each entry in the array is a 20 bits value composed of 16 bits unsigned
> > > integer and 4 bits fractional part. So the type should change to __u32.
> > > In addition add a documentation of how the measurements are done.
> > 
> > Dafna, Helen, does it make sense at all to backport these three patches to
> > when rkisp1 was a staging driver?
> > 
> > I would be inclined not to backport this.
> 
> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.

Why was it ok to change the uapi in a newer kernel and not an older one?

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Hans Verkuil]

On 09/02/2021 14:02, Greg Kroah-Hartman wrote:
> On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
>>
>>
>> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
>>> On 08/02/2021 18:57, Sasha Levin wrote:
>>>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>>>
>>>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
>>>>
>>>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
>>>> integer and 4 bits fractional part. So the type should change to __u32.
>>>> In addition add a documentation of how the measurements are done.
>>>
>>> Dafna, Helen, does it make sense at all to backport these three patches to
>>> when rkisp1 was a staging driver?
>>>
>>> I would be inclined not to backport this.
>>
>> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.
> 
> Why was it ok to change the uapi in a newer kernel and not an older one?

In the older kernels this was a staging driver and the driver API was not public.
It's debatable whether there is any benefit from trying to backport patches like
this to a staging driver like that.

Also, these backports are incomplete, there are other patches that would need to
be applied to make this work. Applying just these three patches without the other
three (commits 66d81de7ea9d, fc672d806bd7 and ef357e02b6c4) makes it very messy
indeed.

I'd just leave the staging driver in older kernels as-is. Certainly don't just
apply these three patches without the other three commits, that would make it
even worse.

Regards,

	Hans

> 
> thanks,
> 
> greg k-h
> 

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Hans Verkuil]

On 09/02/2021 14:02, Greg Kroah-Hartman wrote:
> On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
>>
>>
>> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
>>> On 08/02/2021 18:57, Sasha Levin wrote:
>>>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>>>>
>>>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
>>>>
>>>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
>>>> integer and 4 bits fractional part. So the type should change to __u32.
>>>> In addition add a documentation of how the measurements are done.
>>>
>>> Dafna, Helen, does it make sense at all to backport these three patches to
>>> when rkisp1 was a staging driver?
>>>
>>> I would be inclined not to backport this.
>>
>> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.
> 
> Why was it ok to change the uapi in a newer kernel and not an older one?

In the older kernels this was a staging driver and the driver API was not public.
It's debatable whether there is any benefit from trying to backport patches like
this to a staging driver like that.

Also, these backports are incomplete, there are other patches that would need to
be applied to make this work. Applying just these three patches without the other
three (commits 66d81de7ea9d, fc672d806bd7 and ef357e02b6c4) makes it very messy
indeed.

I'd just leave the staging driver in older kernels as-is. Certainly don't just
apply these three patches without the other three commits, that would make it
even worse.

Regards,

	Hans

> 
> thanks,
> 
> greg k-h
> 

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Greg Kroah-Hartman]

On Tue, Feb 09, 2021 at 02:39:41PM +0100, Hans Verkuil wrote:
> On 09/02/2021 14:02, Greg Kroah-Hartman wrote:
> > On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
> >>
> >>
> >> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
> >>> On 08/02/2021 18:57, Sasha Levin wrote:
> >>>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> >>>>
> >>>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
> >>>>
> >>>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
> >>>> integer and 4 bits fractional part. So the type should change to __u32.
> >>>> In addition add a documentation of how the measurements are done.
> >>>
> >>> Dafna, Helen, does it make sense at all to backport these three patches to
> >>> when rkisp1 was a staging driver?
> >>>
> >>> I would be inclined not to backport this.
> >>
> >> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.
> > 
> > Why was it ok to change the uapi in a newer kernel and not an older one?
> 
> In the older kernels this was a staging driver and the driver API was not public.
> It's debatable whether there is any benefit from trying to backport patches like
> this to a staging driver like that.
> 
> Also, these backports are incomplete, there are other patches that would need to
> be applied to make this work. Applying just these three patches without the other
> three (commits 66d81de7ea9d, fc672d806bd7 and ef357e02b6c4) makes it very messy
> indeed.
> 
> I'd just leave the staging driver in older kernels as-is. Certainly don't just
> apply these three patches without the other three commits, that would make it
> even worse.

Fair enough, Sasha, can you drop these?

thanks,

greg k-h

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Greg Kroah-Hartman]

On Tue, Feb 09, 2021 at 02:39:41PM +0100, Hans Verkuil wrote:
> On 09/02/2021 14:02, Greg Kroah-Hartman wrote:
> > On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
> >>
> >>
> >> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
> >>> On 08/02/2021 18:57, Sasha Levin wrote:
> >>>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> >>>>
> >>>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
> >>>>
> >>>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
> >>>> integer and 4 bits fractional part. So the type should change to __u32.
> >>>> In addition add a documentation of how the measurements are done.
> >>>
> >>> Dafna, Helen, does it make sense at all to backport these three patches to
> >>> when rkisp1 was a staging driver?
> >>>
> >>> I would be inclined not to backport this.
> >>
> >> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.
> > 
> > Why was it ok to change the uapi in a newer kernel and not an older one?
> 
> In the older kernels this was a staging driver and the driver API was not public.
> It's debatable whether there is any benefit from trying to backport patches like
> this to a staging driver like that.
> 
> Also, these backports are incomplete, there are other patches that would need to
> be applied to make this work. Applying just these three patches without the other
> three (commits 66d81de7ea9d, fc672d806bd7 and ef357e02b6c4) makes it very messy
> indeed.
> 
> I'd just leave the staging driver in older kernels as-is. Certainly don't just
> apply these three patches without the other three commits, that would make it
> even worse.

Fair enough, Sasha, can you drop these?

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Sasha Levin]

On Tue, Feb 09, 2021 at 02:44:19PM +0100, Greg Kroah-Hartman wrote:
>On Tue, Feb 09, 2021 at 02:39:41PM +0100, Hans Verkuil wrote:
>> On 09/02/2021 14:02, Greg Kroah-Hartman wrote:
>> > On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
>> >>
>> >>
>> >> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
>> >>> On 08/02/2021 18:57, Sasha Levin wrote:
>> >>>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>> >>>>
>> >>>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
>> >>>>
>> >>>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
>> >>>> integer and 4 bits fractional part. So the type should change to __u32.
>> >>>> In addition add a documentation of how the measurements are done.
>> >>>
>> >>> Dafna, Helen, does it make sense at all to backport these three patches to
>> >>> when rkisp1 was a staging driver?
>> >>>
>> >>> I would be inclined not to backport this.
>> >>
>> >> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.
>> >
>> > Why was it ok to change the uapi in a newer kernel and not an older one?
>>
>> In the older kernels this was a staging driver and the driver API was not public.
>> It's debatable whether there is any benefit from trying to backport patches like
>> this to a staging driver like that.
>>
>> Also, these backports are incomplete, there are other patches that would need to
>> be applied to make this work. Applying just these three patches without the other
>> three (commits 66d81de7ea9d, fc672d806bd7 and ef357e02b6c4) makes it very messy
>> indeed.
>>
>> I'd just leave the staging driver in older kernels as-is. Certainly don't just
>> apply these three patches without the other three commits, that would make it
>> even worse.
>
>Fair enough, Sasha, can you drop these?

Yup.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.10 14/36] media: rkisp1: uapi: change hist_bins array type from __u16 to __u32

[Sasha Levin]

On Tue, Feb 09, 2021 at 02:44:19PM +0100, Greg Kroah-Hartman wrote:
>On Tue, Feb 09, 2021 at 02:39:41PM +0100, Hans Verkuil wrote:
>> On 09/02/2021 14:02, Greg Kroah-Hartman wrote:
>> > On Tue, Feb 09, 2021 at 01:45:35PM +0100, Dafna Hirschfeld wrote:
>> >>
>> >>
>> >> Am 08.02.21 um 21:46 schrieb Hans Verkuil:
>> >>> On 08/02/2021 18:57, Sasha Levin wrote:
>> >>>> From: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>> >>>>
>> >>>> [ Upstream commit 31f190e0ccac8b75d33fdc95a797c526cf9b149e ]
>> >>>>
>> >>>> Each entry in the array is a 20 bits value composed of 16 bits unsigned
>> >>>> integer and 4 bits fractional part. So the type should change to __u32.
>> >>>> In addition add a documentation of how the measurements are done.
>> >>>
>> >>> Dafna, Helen, does it make sense at all to backport these three patches to
>> >>> when rkisp1 was a staging driver?
>> >>>
>> >>> I would be inclined not to backport this.
>> >>
>> >> I also don't think it makes sense since this changes the uapi and it is not really a bug fix.
>> >
>> > Why was it ok to change the uapi in a newer kernel and not an older one?
>>
>> In the older kernels this was a staging driver and the driver API was not public.
>> It's debatable whether there is any benefit from trying to backport patches like
>> this to a staging driver like that.
>>
>> Also, these backports are incomplete, there are other patches that would need to
>> be applied to make this work. Applying just these three patches without the other
>> three (commits 66d81de7ea9d, fc672d806bd7 and ef357e02b6c4) makes it very messy
>> indeed.
>>
>> I'd just leave the staging driver in older kernels as-is. Certainly don't just
>> apply these three patches without the other three commits, that would make it
>> even worse.
>
>Fair enough, Sasha, can you drop these?

Yup.

-- 
Thanks,
Sasha
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH AUTOSEL 5.10 09/36] platform/x86: hp-wmi: Disable tablet-mode reporting by default

[mark gross]

looks good to me.

--mark

On Mon, Feb 08, 2021 at 12:57:39PM -0500, Sasha Levin wrote:
> From: Hans de Goede <hdegoede@redhat.com>
> 
> [ Upstream commit 67fbe02a5cebc3c653610f12e3c0424e58450153 ]
> 
> Recently userspace has started making more use of SW_TABLET_MODE
> (when an input-dev reports this).
> 
> Specifically recent GNOME3 versions will:
> 
> 1.  When SW_TABLET_MODE is reported and is reporting 0:
> 1.1 Disable accelerometer-based screen auto-rotation
> 1.2 Disable automatically showing the on-screen keyboard when a
>     text-input field is focussed
> 
> 2.  When SW_TABLET_MODE is reported and is reporting 1:
> 2.1 Ignore input-events from the builtin keyboard and touchpad
>     (this is for 360° hinges style 2-in-1s where the keyboard and
>      touchpads are accessible on the back of the tablet when folded
>      into tablet-mode)
> 
> This means that claiming to support SW_TABLET_MODE when it does not
> actually work / reports correct values has bad side-effects.
> 
> The check in the hp-wmi code which is used to decide if the input-dev
> should claim SW_TABLET_MODE support, only checks if the
> HPWMI_HARDWARE_QUERY is supported. It does *not* check if the hardware
> actually is capable of reporting SW_TABLET_MODE.
> 
> This leads to the hp-wmi input-dev claiming SW_TABLET_MODE support,
> while in reality it will always report 0 as SW_TABLET_MODE value.
> This has been seen on a "HP ENVY x360 Convertible 15-cp0xxx" and
> this likely is the case on a whole lot of other HP models.
> 
> This problem causes both auto-rotation and on-screen keyboard
> support to not work on affected x360 models.
> 
> There is no easy fix for this, but since userspace expects
> SW_TABLET_MODE reporting to be reliable when advertised it is
> better to not claim/report SW_TABLET_MODE support at all, then
> to claim to support it while it does not work.
> 
> To avoid the mentioned problems, add a new enable_tablet_mode_sw
> module-parameter which defaults to false.
> 
> Note I've made this an int using the standard -1=auto, 0=off, 1=on
> triplett, with the hope that in the future we can come up with a
> better way to detect SW_TABLET_MODE support. ATM the default
> auto option just does the same as off.
> 
> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1918255
> Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Acked-by: Mark Gross <mgross@linux.intel.com>
> Link: https://lore.kernel.org/r/20210120124941.73409-1-hdegoede@redhat.com
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/platform/x86/hp-wmi.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
> index 18bf8aeb5f870..e94e59283ecb9 100644
> --- a/drivers/platform/x86/hp-wmi.c
> +++ b/drivers/platform/x86/hp-wmi.c
> @@ -32,6 +32,10 @@ MODULE_LICENSE("GPL");
>  MODULE_ALIAS("wmi:95F24279-4D7B-4334-9387-ACCDC67EF61C");
>  MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
>  
> +static int enable_tablet_mode_sw = -1;
> +module_param(enable_tablet_mode_sw, int, 0444);
> +MODULE_PARM_DESC(enable_tablet_mode_sw, "Enable SW_TABLET_MODE reporting (-1=auto, 0=no, 1=yes)");
> +
>  #define HPWMI_EVENT_GUID "95F24279-4D7B-4334-9387-ACCDC67EF61C"
>  #define HPWMI_BIOS_GUID "5FB7F034-2C63-45e9-BE91-3D44E2C707E4"
>  
> @@ -654,10 +658,12 @@ static int __init hp_wmi_input_setup(void)
>  	}
>  
>  	/* Tablet mode */
> -	val = hp_wmi_hw_state(HPWMI_TABLET_MASK);
> -	if (!(val < 0)) {
> -		__set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
> -		input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, val);
> +	if (enable_tablet_mode_sw > 0) {
> +		val = hp_wmi_hw_state(HPWMI_TABLET_MASK);
> +		if (val >= 0) {
> +			__set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
> +			input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE, val);
> +		}
>  	}
>  
>  	err = sparse_keymap_setup(hp_wmi_input_dev, hp_wmi_keymap, NULL);
> -- 
> 2.27.0
>