All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <marek.behun@nic.cz>
To: u-boot@lists.denx.de
Subject: [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision
Date: Mon,  8 Feb 2021 20:12:25 +0100	[thread overview]
Message-ID: <20210208191225.14645-1-marek.behun@nic.cz> (raw)

From: motib <motib@marvell.com>

In each pattern cycle the bus state can be changed.
In order to avoid it, we need to switch back to the same bus state on
each pattern cycle.

Signed-off-by: motib <motib@marvell.com>

Fixed code style, removed commented code, switched to use DEBUG macros
instead of printf.

Signed-off-by: Marek Beh?n <marek.behun@nic.cz>
---
 .../a38x/ddr3_training_centralization.c       | 25 +++++++++++++++++++
 .../marvell/a38x/ddr3_training_ip_engine.c    |  8 ++++--
 2 files changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c
index 648b37ef6f..a92760681e 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c
@@ -24,6 +24,8 @@ u8 bus_start_window[NUM_OF_CENTRAL_TYPES][MAX_INTERFACE_NUM][MAX_BUS_NUM];
 u8 centralization_state[MAX_INTERFACE_NUM][MAX_BUS_NUM];
 static u8 ddr3_tip_special_rx_run_once_flag;
 
+extern u8 byte_status[MAX_INTERFACE_NUM][MAX_BUS_NUM];
+
 static int ddr3_tip_centralization(u32 dev_num, u32 mode);
 
 /*
@@ -110,6 +112,7 @@ static int ddr3_tip_centralization(u32 dev_num, u32 mode)
 				(max_win_size - 1) + cons_tap;
 			bus_start_window[mode][if_id][bus_id] = 0;
 			centralization_result[if_id][bus_id] = 0;
+			byte_status[if_id][bus_id] = BYTE_NOT_DEFINED;
 		}
 	}
 
@@ -166,6 +169,12 @@ static int ddr3_tip_centralization(u32 dev_num, u32 mode)
 						  result[search_dir_id][7]));
 				}
 
+				DEBUG_CENTRALIZATION_ENGINE
+					(DEBUG_LEVEL_TRACE,
+					 ("byte_status[%d][%d] = 0x%x\n",
+					 if_id,
+					 bus_id,
+					 byte_status[if_id][bus_id]));
 				for (bit_id = 0; bit_id < BUS_WIDTH_IN_BITS;
 				     bit_id++) {
 					/* check if this code is valid for 2 edge, probably not :( */
@@ -174,11 +183,27 @@ static int ddr3_tip_centralization(u32 dev_num, u32 mode)
 							       [HWS_LOW2HIGH]
 							       [bit_id],
 							       EDGE_1);
+					if ((byte_status[if_id][bus_id] & BYTE_SPLIT_OUT_MIX) ||
+					    (byte_status[if_id][bus_id] & BYTE_HOMOGENEOUS_SPLIT_OUT)) {
+						if (cur_start_win[bit_id] >= 64)
+							cur_start_win[bit_id] -= 64;
+						else
+							cur_start_win[bit_id] = 0;
+						DEBUG_CENTRALIZATION_ENGINE
+							(DEBUG_LEVEL_TRACE,
+							 ("--------------------------\n"));
+					}
 					cur_end_win[bit_id] =
 						GET_TAP_RESULT(result
 							       [HWS_HIGH2LOW]
 							       [bit_id],
 							       EDGE_1);
+					if (cur_end_win[bit_id] >= 64 && (byte_status[if_id][bus_id] & BYTE_SPLIT_OUT_MIX)) {
+						cur_end_win[bit_id] -= 64;
+						DEBUG_CENTRALIZATION_ENGINE
+							(DEBUG_LEVEL_TRACE,
+							 ("++++++++++++++++++++++++++\n"));
+					}
 					/* window length */
 					current_window[bit_id] =
 						cur_end_win[bit_id] -
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
index 5fd9a052fa..3d1fa1e74e 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
@@ -1174,7 +1174,6 @@ int ddr3_tip_ip_training_wrapper(u32 dev_num, enum hws_access_type access_type,
 
 			/* zero the data base */
 			bit_bit_mask[sybphy_id] = 0;
-			byte_status[if_id][sybphy_id] = BYTE_NOT_DEFINED;
 			for (bit_id = 0; bit_id < bit_end; bit_id++) {
 				h2l_adll_value[sybphy_id][bit_id] = 64;
 				l2h_adll_value[sybphy_id][bit_id] = 0;
@@ -1276,6 +1275,7 @@ int ddr3_tip_ip_training_wrapper(u32 dev_num, enum hws_access_type access_type,
 			l2h_if_train_res = ddr3_tip_get_buf_ptr(dev_num, HWS_LOW2HIGH, result_type, if_id);
 			h2l_if_train_res = ddr3_tip_get_buf_ptr(dev_num, HWS_HIGH2LOW, result_type, if_id);
 			/* search from middle to end */
+
 			ddr3_tip_ip_training
 				(dev_num, ACCESS_TYPE_UNICAST,
 				 if_id, ACCESS_TYPE_MULTICAST,
@@ -1423,7 +1423,7 @@ int ddr3_tip_ip_training_wrapper(u32 dev_num, enum hws_access_type access_type,
 				* the byte can be aligned. in this case add 64 to the the low ui bits aligning it
 				* to the other ui bits
 				*/
-			if (center_subphy_adll_window[sybphy_id] >= 32) {
+			if (center_subphy_adll_window[sybphy_id] >= 32 || bit_bit_mask[sybphy_id] != 0x0) {
 				byte_status[if_id][sybphy_id] = BYTE_SPLIT_OUT_MIX;
 
 				DEBUG_TRAINING_IP_ENGINE
@@ -1432,8 +1432,12 @@ int ddr3_tip_ip_training_wrapper(u32 dev_num, enum hws_access_type access_type,
 					 if_id, sybphy_id, byte_status[if_id][sybphy_id]));
 				for (bit_id = 0; bit_id < bit_end; bit_id++) {
 					if (bit_state[sybphy_id * BUS_WIDTH_IN_BITS + bit_id] == BIT_LOW_UI) {
+						if (bit_bit_mask[sybphy_id] & (1 << bit_id))
+							continue;
 						l2h_if_train_res[sybphy_id * BUS_WIDTH_IN_BITS + bit_id] += 64;
+						l2h_adll_value[sybphy_id][bit_id] = l2h_if_train_res[sybphy_id * BUS_WIDTH_IN_BITS + bit_id];
 						h2l_if_train_res[sybphy_id * BUS_WIDTH_IN_BITS + bit_id] += 64;
+						h2l_adll_value[sybphy_id][bit_id] = h2l_if_train_res[sybphy_id * BUS_WIDTH_IN_BITS + bit_id];
 					}
 					DEBUG_TRAINING_IP_ENGINE
 						(DEBUG_LEVEL_TRACE,
-- 
2.26.2

             reply	other threads:[~2021-02-08 19:12 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-08 19:12 Marek Behún [this message]
2021-02-08 19:15 ` [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision Marek Behun
2021-02-08 20:14   ` Chris Packham
2021-02-08 20:24     ` Marek Behun
2021-06-28  7:20       ` Pali Rohár
2021-06-28  9:21         ` Chris Packham
2021-06-28  9:53           ` Chris Packham
2022-01-04 20:28 Marek Behún
2022-01-04 22:10 ` Chris Packham
2022-01-05  9:10   ` Marek Behún
2022-01-05 22:51     ` Chris Packham
2022-01-06  3:04       ` Chris Packham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210208191225.14645-1-marek.behun@nic.cz \
    --to=marek.behun@nic.cz \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.