All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
	Andy Gross <agross@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 5/7] arm64: dts: qcom: sm8350: Add remoteprocs
Date: Fri, 12 Feb 2021 17:25:30 +0530	[thread overview]
Message-ID: <20210212115532.1339942-6-vkoul@kernel.org> (raw)
In-Reply-To: <20210212115532.1339942-1-vkoul@kernel.org>

Add remoteproc nodes for the audio, compute and sensor cores, define
glink for each one.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 158 +++++++++++++++++++++++++++
 1 file changed, 158 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 1ea72f30ea5a..6e366653eeab 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -562,6 +562,46 @@ tcsr_mutex: hwlock@1f40000 {
 			#hwlock-cells = <1>;
 		};
 
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+					<&rpmhpd SM8350_CX>,
+					<&rpmhpd SM8350_MSS>;
+			power-domain-names = "load_state", "cx", "mss";
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8350-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -824,6 +864,85 @@ ufs_mem_phy_lanes: lanes@1d87400 {
 			};
 		};
 
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8350-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+					<&rpmhpd SM8350_LCX>,
+					<&rpmhpd SM8350_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&pil_slpi_mem>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+			};
+		};
+
+		cdsp: remoteproc@98900000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0 0x098900000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+					<&rpmhpd SM8350_CX>,
+					<&rpmhpd SM8350_MXC>;
+			power-domain-names = "load_state", "cx", "mxc";
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8350-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -1002,6 +1121,45 @@ usb_2_dwc3: dwc3@a800000 {
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
+
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8350-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+					<&rpmhpd SM8350_LCX>,
+					<&rpmhpd SM8350_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
 	};
 
 	timer {
-- 
2.26.2


  parent reply	other threads:[~2021-02-12 11:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-12 11:55 [PATCH 0/7] arm64: dts: qcom: sm8350: additional device support Vinod Koul
2021-02-12 11:55 ` [PATCH 1/7] arm64: dts: qcom: sm8350: fix typo Vinod Koul
2021-02-12 11:55 ` [PATCH 2/7] arm64: dts: qcom: sm8350: Add rpmhpd node Vinod Koul
2021-02-12 11:55 ` [PATCH 3/7] arm64: dts: qcom: sm8350: Add rmtfs node Vinod Koul
2021-02-12 11:55 ` [PATCH 4/7] arm64: dts: qcom: sm8350: Add SMP2P nodes Vinod Koul
2021-02-12 11:55 ` Vinod Koul [this message]
2021-02-12 11:55 ` [PATCH 6/7] arm64: dts: qcom: sm8350-mtp: Enable remoteprocs Vinod Koul
2021-02-12 11:55 ` [PATCH 7/7] arm64: dts: qcom: sm8350: Use enums for GCC Vinod Koul
2021-02-16 11:17   ` [PATCH 7/6] arm64: dts: qcom: sm8350: Add cpufreq node Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210212115532.1339942-6-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.