All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjarni Jonasson <bjarni.jonasson@microchip.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Antoine Tenart <atenart@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Bjarni Jonasson <bjarni.jonasson@microchip.com>,
	<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	UNGLinuxDriver <UNGLinuxDriver@microchip.com>,
	Steen Hegelund <steen.hegelund@microchip.com>
Subject: [PATCH net-next v2 3/3]  net: phy: mscc: coma mode disabled for VSC8514
Date: Mon, 15 Feb 2021 17:58:00 +0100	[thread overview]
Message-ID: <20210215165800.14580-3-bjarni.jonasson@microchip.com> (raw)
In-Reply-To: <20210215165800.14580-1-bjarni.jonasson@microchip.com>

The 'coma mode' (configurable through sw or hw) provides an
optional feature that may be used to control when the PHYs become active.
The typical usage is to synchronize the link-up time across
all PHY instances. This patch releases coma mode if not done by hardware,
otherwise the phys will not link-up

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.")
---
v1 -> v2:
  Modified coma mode config 
  Changed net to net-next

 drivers/net/phy/mscc/mscc.h      |  3 +++
 drivers/net/phy/mscc/mscc_main.c | 16 ++++++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 9d8ee387739e..2b70ccd1b256 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -160,6 +160,9 @@ enum rgmii_clock_delay {
 #define MSCC_PHY_PAGE_TR		  0x52b5 /* Token ring registers */
 #define MSCC_PHY_GPIO_CONTROL_2	  14
 
+#define MSCC_PHY_COMA_MODE		  0x2000 /* input(1) / output(0) */
+#define MSCC_PHY_COMA_OUTPUT		  0x1000 /* value to output */
+
 /* Extended Page 1 Registers */
 #define MSCC_PHY_CU_MEDIA_CRC_VALID_CNT	  18
 #define VALID_CRC_CNT_CRC_MASK		  GENMASK(13, 0)
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 03181542bcb7..29302ccf7e7b 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1520,6 +1520,21 @@ static void vsc8584_get_base_addr(struct phy_device *phydev)
 	vsc8531->addr = addr;
 }
 
+static void vsc85xx_coma_mode_release(struct phy_device *phydev)
+{
+	/* The coma mode (pin or reg) provides an optional feature that
+	 * may be used to control when the PHYs become active.
+	 * Alternatively the COMA_MODE pin may be connected low
+	 * so that the PHYs are fully active once out of reset.
+	 */
+	phy_unlock_mdio_bus(phydev);
+	/* Enable output (mode=0) and write zero to it */
+	phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_GPIO,
+			 MSCC_PHY_GPIO_CONTROL_2,
+			 MSCC_PHY_COMA_MODE | MSCC_PHY_COMA_OUTPUT, 0);
+	phy_lock_mdio_bus(phydev);
+}
+
 static int vsc8584_config_init(struct phy_device *phydev)
 {
 	struct vsc8531_private *vsc8531 = phydev->priv;
@@ -2604,6 +2619,7 @@ static int vsc8514_config_init(struct phy_device *phydev)
 		ret = vsc8514_config_host_serdes(phydev);
 		if (ret)
 			goto err;
+		vsc85xx_coma_mode_release(phydev);
 	}
 
 	phy_unlock_mdio_bus(phydev);
-- 
2.17.1


  parent reply	other threads:[~2021-02-15 17:39 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-15 16:57 [PATCH net-next v2 1/3] net: phy: mscc: adding LCPLL reset to VSC8514 Bjarni Jonasson
2021-02-15 16:57 ` [PATCH net-next v2 2/3] net: phy: mscc: improved serdes calibration applied " Bjarni Jonasson
2021-02-15 17:27   ` Heiner Kallweit
2021-02-16 10:58     ` Bjarni.Jonasson
2021-02-15 16:58 ` Bjarni Jonasson [this message]
2021-02-15 20:08   ` [PATCH net-next v2 3/3] net: phy: mscc: coma mode disabled for VSC8514 Heiner Kallweit
2021-02-16 11:04     ` Bjarni.Jonasson
2021-02-15 17:25 ` [PATCH net-next v2 1/3] net: phy: mscc: adding LCPLL reset to VSC8514 Heiner Kallweit
2021-02-16 10:48   ` Bjarni.Jonasson
2021-02-16 11:02   ` Bjarni.Jonasson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210215165800.14580-3-bjarni.jonasson@microchip.com \
    --to=bjarni.jonasson@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=atenart@kernel.org \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=ioana.ciornei@nxp.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=steen.hegelund@microchip.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.