From mboxrd@z Thu Jan 1 00:00:00 1970 From: Luka Kovacic Date: Mon, 15 Feb 2021 20:59:34 +0100 Subject: [PATCH v2 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support In-Reply-To: <20210215195934.67034-1-luka.kovacic@sartura.hr> References: <20210215195934.67034-1-luka.kovacic@sartura.hr> Message-ID: <20210215195934.67034-4-luka.kovacic@sartura.hr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add initial support for the ESPRESSOBin-Ultra board from Globalscale Technologies, Inc. The board is based on the 64-bit dual-core Marvell Armada 3720 SoC. Peripherals: - 5 Gigabit Ethernet ports (WAN has PoE, up to 30W, Topaz 6341 switch) - RTC clock (PCF8563) - USB 3.0 port - USB 2.0 port - 4x LED - UART over Micro-USB - M.2 slot (2280) - Mini PCI-E slot Additionally, automatic import of the Marvell hw_info parameters is enabled via the recently added hw_info command. The parameters stored in Marvell hw_info are usually the board serial number and MAC addresses. Signed-off-by: Luka Kovacic Cc: Luka Perkov Cc: Robert Marko --- arch/arm/dts/Makefile | 1 + .../arm/dts/armada-3720-espressobin-ultra.dts | 202 ++++++++++++++++++ board/Marvell/mvebu_armada-37xx/MAINTAINERS | 8 + board/Marvell/mvebu_armada-37xx/board.c | 92 +++++++- .../mvebu_espressobin-ultra-88f3720_defconfig | 92 ++++++++ 5 files changed, 389 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/armada-3720-espressobin-ultra.dts create mode 100644 configs/mvebu_espressobin-ultra-88f3720_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 33e483f4fb..9f544b1caf 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -208,6 +208,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += \ armada-3720-db.dtb \ armada-3720-espressobin.dtb \ + armada-3720-espressobin-ultra.dtb \ armada-3720-turris-mox.dtb \ armada-3720-uDPU.dtb \ armada-375-db.dtb \ diff --git a/arch/arm/dts/armada-3720-espressobin-ultra.dts b/arch/arm/dts/armada-3720-espressobin-ultra.dts new file mode 100644 index 0000000000..70f97fe239 --- /dev/null +++ b/arch/arm/dts/armada-3720-espressobin-ultra.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for ESPRESSObin-Ultra board + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Globalscale technologies, Inc. + * Copyright (C) 2020 Sartura Ltd. + * + * Author: Jason Hung + * Author: Luka Kovacic + * Author: Vladimir Vid + */ + +/dts-v1/; + +#include "armada-372x.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Ultra Board"; + compatible = "globalscale,espressobin-ultra", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð0; + i2c0 = &i2c0; + spi0 = &spi0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg0: regulator at 0 { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + states = <1800000 0x1 + 3300000 0x0>; + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + }; + + gpio-leds { + pinctrl-names = "default"; + pinctrl-0 = <&led1_pins>, <&led2_pins>, <&led3_pins>, <&led4_pins>; + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led2 { + label = "led2"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led3 { + label = "led3"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led4 { + label = "led4"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +&pinctrl_nb { + led1_pins: led1-pins { + groups = "pwm0"; + function = "gpio"; + }; + led2_pins: led2-pins { + groups = "pwm1"; + function = "gpio"; + }; + led3_pins: led3-pins { + groups = "pwm2"; + function = "gpio"; + }; + led4_pins: led4-pins { + groups = "pwm3"; + function = "gpio"; + }; +}; + +&comphy { + max-lanes = <3>; + phy0 { + phy-type = ; + phy-speed = ; + }; + + phy1 { + phy-type = ; + phy-speed = ; + }; + + phy2 { + phy-type = ; + phy-speed = ; + }; +}; + +ð0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii"; + phy_addr = <0x3>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + rtc at 51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&sata { + status = "okay"; +}; + +&sdhci0 { + status = "disabled"; +}; + +/* U11 */ +&sdhci1 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard at 0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + spi-flash at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/board/Marvell/mvebu_armada-37xx/MAINTAINERS b/board/Marvell/mvebu_armada-37xx/MAINTAINERS index f2c0a582d7..d69af832fc 100644 --- a/board/Marvell/mvebu_armada-37xx/MAINTAINERS +++ b/board/Marvell/mvebu_armada-37xx/MAINTAINERS @@ -10,6 +10,14 @@ M: Konstantin Porotchkin S: Maintained F: configs/mvebu_espressobin-88f3720_defconfig +ESPRESSOBin-Ultra BOARD +M: Luka Kovacic +M: Robert Marko +M: Luka Perkov +S: Maintained +F: arch/arm/dts/armada-3720-espressobin-ultra.dts +F: configs/mvebu_espressobin-ultra-88f3720_defconfig + uDPU BOARD M: Vladimir Vid S: Maintained diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c index c630437c08..9ffda8fdba 100644 --- a/board/Marvell/mvebu_armada-37xx/board.c +++ b/board/Marvell/mvebu_armada-37xx/board.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -55,6 +56,15 @@ DECLARE_GLOBAL_DATA_PTR; #define MVEBU_G2_SMI_PHY_CMD_REG (24) #define MVEBU_G2_SMI_PHY_DATA_REG (25) +/* Marvell 88E1512 */ +#define MII_MARVELL_PHY_PAGE 22 + +#define MV88E1512_GENERAL_CTRL 20 +#define MV88E1512_MODE_SGMII 1 +#define MV88E1512_RESET_OFFS 15 + +#define ULTRA_MV88E1512_PHYADDR 0x1 + /* * Memory Controller Registers * @@ -289,12 +299,68 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr, return 0; } -/* Bring-up board-specific network stuff */ -int board_network_enable(struct mii_dev *bus) +void force_phy_88e1512_sgmii_to_copper(u16 devaddr) { - if (!of_machine_is_compatible("globalscale,espressobin")) - return 0; + const char *name; + u16 reg; + + name = miiphy_get_current_dev(); + if (name) { + /* SGMII-to-Copper mode initialization */ + + /* Select page 18 */ + miiphy_write(name, devaddr, MII_MARVELL_PHY_PAGE, 0x12); + /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */ + miiphy_read(name, devaddr, MV88E1512_GENERAL_CTRL, ®); + reg &= ~0x7; + reg |= MV88E1512_MODE_SGMII; + miiphy_write(name, devaddr, MV88E1512_GENERAL_CTRL, reg); + /* PHY reset is necessary after changing MODE[2:0] */ + miiphy_read(name, devaddr, MV88E1512_GENERAL_CTRL, ®); + reg |= 1 << MV88E1512_RESET_OFFS; + miiphy_write(name, devaddr, MV88E1512_GENERAL_CTRL, reg); + /* Reset page selection */ + miiphy_write(name, devaddr, MII_MARVELL_PHY_PAGE, 0); + udelay(100); + } +} + +int board_network_enable_espressobin_ultra(struct mii_dev *bus) +{ + int i; + /* Setup 88E1512 SGMII-to-Copper mode */ + force_phy_88e1512_sgmii_to_copper(ULTRA_MV88E1512_PHYADDR); + /* + * FIXME: remove this code once Topaz driver gets available + * A3720 ESPRESSObin Ultra Board Only + * Configure Topaz switch (88E6341) + * Set port 1,2,3,4,5 to forwarding Mode (through Switch Port registers) + */ + for (i = 0; i <= 5; i++) { + mii_multi_chip_mode_write(bus, 3, MVEBU_PORT_CTRL_SMI_ADDR(i), + MVEBU_SW_PORT_CTRL_REG, + i == 5 ? 0x7c : 0x7f); + } + + /* RGMII Delay on Port 0 (CPU port), force link to 1000Mbps */ + mii_multi_chip_mode_write(bus, 3, MVEBU_PORT_CTRL_SMI_ADDR(0), + MVEBU_SW_LINK_CTRL_REG, 0xe002); + + /* Power up PHY 1, 2, 3, 4, 5 (through Global 2 registers) */ + mii_multi_chip_mode_write(bus, 3, MVEBU_SW_G2_SMI_ADDR, + MVEBU_G2_SMI_PHY_DATA_REG, 0x1140); + for (i = 1; i <= 5; i++) { + mii_multi_chip_mode_write(bus, 3, MVEBU_SW_G2_SMI_ADDR, + MVEBU_G2_SMI_PHY_CMD_REG, 0x9400 + + (MVEBU_PORT_CTRL_SMI_ADDR(i) << 5)); + } + + return 0; +} + +int board_network_enable_espressobin(struct mii_dev *bus) +{ /* * FIXME: remove this code once Topaz driver gets available * A3720 Community Board Only @@ -335,6 +401,16 @@ int board_network_enable(struct mii_dev *bus) return 0; } +/* Bring-up the board-specific networking */ +int board_network_enable(struct mii_dev *bus) +{ + if (of_machine_is_compatible("globalscale,espressobin")) + return board_network_enable_espressobin(bus); + if (of_machine_is_compatible("globalscale,espressobin-ultra")) + return board_network_enable_espressobin_ultra(bus); + return 0; +} + #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_ENV_IS_IN_SPI_FLASH) int ft_board_setup(void *blob, struct bd_info *bd) { @@ -343,8 +419,12 @@ int ft_board_setup(void *blob, struct bd_info *bd) int parts_off; int part_off; - /* Fill SPI MTD partitions for Linux kernel on Espressobin */ - if (!of_machine_is_compatible("globalscale,espressobin")) + /* + * Fill SPI MTD partitions for the Linux kernel on ESPRESSOBin and + * ESPRESSOBin Ultra boards. + */ + if (!of_machine_is_compatible("globalscale,espressobin") && + !of_machine_is_compatible("globalscale,espressobin-ultra")) return 0; spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor"); diff --git a/configs/mvebu_espressobin-ultra-88f3720_defconfig b/configs/mvebu_espressobin-ultra-88f3720_defconfig new file mode 100644 index 0000000000..207f38d300 --- /dev/null +++ b/configs/mvebu_espressobin-ultra-88f3720_defconfig @@ -0,0 +1,92 @@ +CONFIG_ARM=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_TEXT_BASE=0x00000000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_TARGET_MVEBU_ARMADA_37XX=y +CONFIG_ENV_SIZE=0x10000 +CONFIG_ENV_OFFSET=0x3F0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_DM_GPIO=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=25804800 +CONFIG_DEFAULT_DEVICE_TREE="armada-3720-espressobin-ultra" +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_FIT_BEST_MATCH=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n" +CONFIG_AUTOBOOT_STOP_STR="s" +CONFIG_AUTOBOOT_KEYED_CTRLC=y +CONFIG_HUSH_PARSER=y +CONFIG_USE_PREBOOT=y +CONFIG_PREBOOT="if printenv read_board_hw_info; then echo \"Marvell hw_info already imported...\" ; else setenv read_board_hw_info 1; hw_info load; fi" +CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_BOARD_LATE_INIT=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_MVEBU_BUBT=y +CONFIG_CMD_MVEBU_HW_INFO=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_MAC_PARTITION=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_AHCI_MVEBU=y +CONFIG_CLK=y +CONFIG_CLK_MVEBU=y +CONFIG_DM_I2C=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MTD=y +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_GIGE=y +CONFIG_MVNETA=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_AARDVARK=y +CONFIG_MVEBU_COMPHY_SUPPORT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_37XX=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_MVEBU_A3700_UART=y +CONFIG_MVEBU_A3700_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_HOST_ETHER=y +CONFIG_SHA1=y +CONFIG_SHA256=y +CONFIG_DM_RTC=y +CONFIG_RTC_PCF8563=y +CONFIG_LED=y +CONFIG_LED_GPIO=y -- 2.20.1